OMAP3: Update Overo pin mux for new expansion board
PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
---
Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"
--- board/omap3/overo/overo.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
board/omap3/overo/overo.h +5 -4
@@ -185,6 +185,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\MUX_VAL (CP (CSI2_DX1 ), (IEN |PTD |EN |M4 ))/*GPIO_114*/ \ + /* - PEN_DOWN*/\MUX_VAL (CP (CSI2_DY1 ), (IEN |PTU |EN |M4 ))/*GPIO_115*/ \ /*Audio Interface */\MUX_VAL (CP (MCBSP2_FSX ), (IEN |PTD |DIS |M0 ))/*McBSP2_FSX*/ \
@@ -295,7 +296,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\ MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT4*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\MUX_VAL (CP (ETK_D2_ES2 ), (IEN |PTU |EN |M4 ))/*GPIO_16*/ \/* - W2W_NRESET*/ \
@@ -303,9 +304,9 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT7*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT6*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT5*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\MUX_VAL (CP (ETK_D12_ES2 ), (IEN |PTD |DIS |M3 ))/*HSUSB2_DIR*/ \
PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board
Quoted 10 lines · Dirk Behme
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by Steve Sakoman <[email protected]>---
Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"
sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
BTW we do need a better api to managen pio setting on the omap3 may be someting as the AT91 api
Best Regards,
J.
PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board
Quoted 8 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 7 lines · Dirk Behme
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by Steve Sakoman <[email protected]>---
Quoted 7 lines
Quoted 3 lines
Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).
Dirk
PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board
Quoted 12 lines · Dirk Behme
Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 10 lines · Dirk Behme
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by Steve Sakoman <[email protected]>---
Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"
Quoted 8 lines
Quoted 4 lines
sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).
Based on the patch info your not the Author of the patch so it must be the same in the Mail Header info
Best Regards,
J.
PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 13 lines · In message <[email protected]> you wrote:
Quoted 13 lines
Quoted 13 lines
Quoted 11 lines
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by Steve Sakoman <[email protected]>---
Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"sorry NACK
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).
Based on the patch info your not the Author of the patch so it must be the same in the Mail Header info
Or Dirk should have added his own signed-off-by: line, too.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A girl with a future avoids the man with a past.
-- Evan Esar, "The Humor of Humor"