Skip to contentSkip to conversation

OMAP3: Update Overo pin mux for new expansion board

PATCH New Dirk Behme 3 participants 5 messages Mar 16, 2009 – Mar 30, 2009

lore
Share & tools
lore

Dirk Behme

author
#0 lore raw

PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board

A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.

---

Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"

---
 board/omap3/overo/overo.h |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
board/omap3/overo/overo.h +5 -4
Index: u-boot-main/board/omap3/overo/overo.h
===================================================================
@@ -185,6 +185,7 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
  MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
  MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | EN  | M4)) /*GPIO_114*/\
+							 /* - PEN_DOWN*/\
  MUX_VAL(CP(CSI2_DY1),		(IEN  | PTU | EN  | M4)) /*GPIO_115*/\
  /*Audio Interface */\
  MUX_VAL(CP(MCBSP2_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
@@ -295,7 +296,7 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
  MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
  MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT4*/\
+ MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_14*/\
  MUX_VAL(CP(ETK_D1_ES2),	(IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
  MUX_VAL(CP(ETK_D2_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_16*/\
 							 /* - W2W_NRESET*/\
@@ -303,9 +304,9 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT0*/\
  MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT1*/\
  MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT7*/\
- MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT6*/\
- MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT5*/\
+ MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_21*/\
+ MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_22*/\
+ MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_23*/\
  MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
  MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
  MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DIR*/\
#1 lore raw

PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board

Quoted 10 lines · Dirk Behme

A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.

---

Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"

sorry NACK

Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually

BTW we do need a better api to managen pio setting on the omap3 may be someting as the AT91 api

Best Regards,
J.

author
#2 lore raw

PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board

Quoted 8 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 7 lines · Dirk Behme

A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.

---

Quoted 7 lines
Quoted 3 lines

Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"

sorry NACK

Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually

Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).

Dirk

#3 lore raw

PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board

Quoted 12 lines · Dirk Behme
Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 10 lines · Dirk Behme

A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.

---

Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"

Quoted 8 lines
Quoted 4 lines

sorry NACK

Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually

Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).

Based on the patch info your not the Author of the patch so it must be the same in the Mail Header info

Best Regards,
J.

#4 lore raw

PATCH 1/1 OMAP3: Update Overo pin mux for new expansion board

Dear Jean-Christophe PLAGNIOL-VILLARD,

Quoted 13 lines · In message <[email protected]> you wrote:
Quoted 13 lines
Quoted 13 lines
Quoted 11 lines

A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.

---

Patch is against recent mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
"Prepare 2009.03-rc2"

sorry NACK

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually

Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).

Based on the patch info your not the Author of the patch so it must be the same in the Mail Header info

Or Dirk should have added his own signed-off-by: line, too.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A girl with a future avoids the man with a past.
                                   -- Evan Esar, "The Humor of Humor"