Skip to contentSkip to conversation

Add "source" command; prepare removal of "autoscr" command

PATCH New Wolfgang Denk 1 participant 2 messages Apr 1, 2009 – Apr 3, 2009 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add "source" command; prepare removal of "autoscr" command

According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now.

This patch prepares this change and starts a 6 month transition period as follows:

- The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the new "source" command
- Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped.

---
Changes since V1:
- add DEPRECATED warning message to "autoscr" help text.
- Print DEPRECATED warning message whenever "autoscr" command gets used.

 README                           |   10 +-
 board/cray/L1/L1.c               |    2 +-
 board/cray/L1/bootscript.hush    |    2 +-
 board/esd/common/cmd_loadpci.c   |    6 +-
 board/pn62/cmd_pn62.c            |    7 +-
 common/Makefile                  |    4 +-
 common/cmd_autoscript.c          |  241 -----------------------------------
 common/cmd_load.c                |    7 +-
 common/cmd_net.c                 |    7 +-
 common/cmd_source.c              |  256 ++++++++++++++++++++++++++++++++++++++
 doc/feature-removal-schedule.txt |   20 ++-
 include/common.h                 |    4 +-
 include/config_cmd_all.h         |    2 +-
 include/config_cmd_default.h     |    2 +-
 include/configs/APC405.h         |   14 +-
 include/configs/CRAYL1.h         |   26 ++--
 include/configs/DU440.h          |   12 +-
 include/configs/EP1C20.h         |    2 +-
 include/configs/GEN860T.h        |    2 +-
 include/configs/MVBC_P.h         |   12 +-
 include/configs/MVBLM7.h         |   12 +-
 include/configs/NETPHONE.h       |    2 +-
 include/configs/NETTA2.h         |    2 +-
 include/configs/NX823.h          |    4 +-
 include/configs/PN62.h           |    6 +-
 include/configs/TOP860.h         |    8 +-
 include/configs/TQM5200.h        |    2 +-
 include/configs/VoVPN-GW.h       |    4 +-
 include/configs/afeb9260.h       |    6 +-
 include/configs/apollon.h        |    2 +-
 include/configs/at91cap9adk.h    |    4 +-
 include/configs/at91sam9260ek.h  |    6 +-
 include/configs/at91sam9261ek.h  |    6 +-
 include/configs/at91sam9263ek.h  |    6 +-
 include/configs/at91sam9rlek.h   |    6 +-
 include/configs/atngw100.h       |    2 +-
 include/configs/atstk1002.h      |    2 +-
 include/configs/atstk1006.h      |    2 +-
 include/configs/eNET.h           |    6 +-
 include/configs/favr-32-ezkit.h  |    2 +-
 include/configs/grsim.h          |   26 ++--
 include/configs/grsim_leon2.h    |   22 ++--
 include/configs/gth2.h           |   14 +-
 include/configs/keymile-common.h |    2 +-
 include/configs/lwmon.h          |    4 +-
 include/configs/lwmon5.h         |    2 +-
 include/configs/mp2usb.h         |    4 +-
 include/configs/mx1fs2.h         |    6 +-
 include/configs/omap2420h4.h     |    2 +-
 include/configs/omap3_beagle.h   |    2 +-
 include/configs/omap3_evm.h      |    2 +-
 include/configs/omap3_overo.h    |    2 +-
 include/configs/omap3_pandora.h  |    2 +-
 include/configs/omap3_zoom1.h    |    2 +-
 include/configs/sc3.h            |   24 ++--
 include/configs/scb9328.h        |    4 +-
 include/configs/stxxtc.h         |    2 +-
 include/configs/vct.h            |   38 +++---
 include/configs/wepep250.h       |    6 +-
 59 files changed, 458 insertions(+), 436 deletions(-)
 delete mode 100644 common/cmd_autoscript.c
 create mode 100644 common/cmd_source.c
README +5 -5
index 32d9acd..fcc4d7c 100644
@@ -593,7 +593,6 @@ The following options need to be configured:
 		except those marked below with a "*".
 
 		CONFIG_CMD_ASKENV	* ask for env variable
-		CONFIG_CMD_AUTOSCRIPT	  Autoscript Support
 		CONFIG_CMD_BDI		  bdinfo
 		CONFIG_CMD_BEDBUG	* Include BedBug Debugger
 		CONFIG_CMD_BMP		* BMP support
@@ -654,6 +653,7 @@ The following options need to be configured:
 					  (requires CONFIG_CMD_I2C)
 		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
 					  (4xx only)
+		CONFIG_CMD_SOURCE	  "source" command Support
 		CONFIG_CMD_SPI		* SPI serial bus support
 		CONFIG_CMD_USB		* USB support
 		CONFIG_CMD_VFD		* VFD support (TRAB)
@@ -1789,7 +1789,7 @@ The following options need to be configured:
 
 		Note: overly (ab)use of the default environment is
 		discouraged. Make sure to check other ways to preset
-		the environment like the autoscript function or the
+		the environment like the "source" command or the
 		boot command first.
 
 - DataFlash Support:
@@ -1948,8 +1948,8 @@ Legacy uImage format:
    81	common/cmd_net.c	NetLoop() back without error
   -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
    82	common/cmd_net.c	trying automatic boot
-   83	common/cmd_net.c	running autoscript
-  -83	common/cmd_net.c	some error in automatic boot or autoscript
+   83	common/cmd_net.c	running "source" command
+  -83	common/cmd_net.c	some error in automatic boot or "source" command
    84	common/cmd_net.c	end without errors
 
 FIT uImage format:
@@ -2952,7 +2952,7 @@ Some configuration options can be set using Environment Variables:
   autoscript	- if set to "yes" commands like "loadb", "loady",
 		  "bootp", "tftpb", "rarpboot" and "nfs" will attempt
 		  to automatically run script images (by internally
-		  calling "autoscript").
+		  calling "source").
 
   autoscript_uname - if script image is in a format (FIT) this
 		     variable is used to get script subimage unit name.
board/cray/L1/L1.c +1 -1
index 1c82bdf..8a06ecc 100644
@@ -164,7 +164,7 @@ int misc_init_r (void)
 			setenv ("ethaddr", e);
 		}
 	}
-	sprintf (bootcmd,"autoscript %X",(unsigned)bootscript);
+	sprintf (bootcmd,"source %X",(unsigned)bootscript);
 	setenv ("bootcmd", bootcmd);
 	return (0);
 }
board/cray/L1/bootscript.hush +1 -1
index ec4839b..f2f78ad 100644
@@ -31,7 +31,7 @@ if printenv bootscript
 	tftp $tftp_addr $bootcript
 	if imi $tftp_addr
 	then
-		autoscript $tftp_addr
+		source $tftp_addr
 	fi
 fi
 
board/esd/common/cmd_loadpci.c +3 -3
index 0a6626e..c779f79 100644
@@ -30,7 +30,7 @@
 #if defined(CONFIG_CMD_BSP)
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-extern int do_autoscript (cmd_tbl_t *, int, int, char *[]);
+extern int do_source (cmd_tbl_t *, int, int, char *[]);
 
 #define ADDRMASK 0xfffff000
 
@@ -98,12 +98,12 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 		case 1:
 			/*
-			 * Boot image via autoscr
+			 * Boot image via "source" command
 			 */
 			printf("executing script at addr 0x%s ...\n", addr);
 			local_args[0] = addr;
 			local_args[1] = NULL;
-			do_autoscript(cmdtp, 0, 1, local_args);
+			do_source(cmdtp, 0, 1, local_args);
 			break;
 
 		case 2:
board/pn62/cmd_pn62.c +4 -3
index 10d0df6..b9f3bdb 100644
@@ -152,12 +152,13 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	rcode = do_bootm (cmdtp, 0, 1, local_args);
     }
 
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
     if (load_addr) {
 	char *s;
 
 	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-		printf ("Running autoscript at addr 0x%08lX", load_addr);
+		printf ("Running "source" command at addr 0x%08lX",
+			load_addr);
 
 		s = getenv ("autoscript_uname");
 		if (s)
@@ -165,7 +166,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		else
 			puts (" ...\n");
 
-		rcode = autoscript (load_addr, s);
+		rcode = source (load_addr, s);
 	}
     }
 #endif
common/Makefile +2 -2
index 23171ca..eb8e283 100644
@@ -61,8 +61,8 @@ COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
 
 # command
 COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
-COBJS-$(CONFIG_AUTOSCRIPT) += cmd_autoscript.o
-COBJS-$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o
+COBJS-$(CONFIG_SOURCE) += cmd_source.o
+COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o
 COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
 COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
 COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
common/cmd_autoscript.c deleted +0 -241

241 lines not on this page · raw message

common/cmd_load.c +4 -3
index 88fba88..d5eaac7 100644
@@ -513,12 +513,13 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}
 	}
 
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
 	if (load_addr) {
 		char *s;
 
 		if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-			printf ("Running autoscript at addr 0x%08lX", load_addr);
+			printf ("Running "source" command at addr 0x%08lX",
+				load_addr);
 
 			s = getenv ("autoscript_uname");
 			if (s)
@@ -526,7 +527,7 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			else
 				puts (" ...\n");
 
-			rcode = autoscript (load_addr, s);
+			rcode = source (load_addr, s);
 		}
 	}
 #endif
common/cmd_net.c +4 -3
index a687849..9bef7a2 100644
@@ -222,9 +222,10 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 		rcode = do_bootm (cmdtp, 0, 1, local_args);
 	}
 
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
 	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
-		printf ("Running autoscript at addr 0x%08lX", load_addr);
+		printf ("Running "source" command at addr 0x%08lX",
+			load_addr);
 
 		s = getenv ("autoscript_uname");
 		if (s)
@@ -233,7 +234,7 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 			puts (" ...\n");
 
 		show_boot_progress (83);
-		rcode = autoscript (load_addr, s);
+		rcode = source (load_addr, s);
 	}
 #endif
 	if (rcode < 0)
common/cmd_source.c new file +256 -0

256 lines not on this page · raw message

doc/feature-removal-schedule.txt +14 -6
index 9ba7a04..cd429a4 100644
@@ -8,12 +8,20 @@ file.
 ---------------------------
 
 What:	"autoscr" command
-When:	August 2009
-Why:	"autosrc" is an ugly and completely non-standard name.  The "autoscr"
-	command is deprecated and will be replaced the "source" command as
-	used by other shells such as bash.  Both commands will be supported
-	for a transition period of 6 months after which "autoscr" will be
-	removed.
+When:	Release 2009-09
+
+Why:	"autosrc" is an ugly and completely non-standard name.
+        The "autoscr" command is deprecated and will be replaced by
+
+        the "source" command as used by other shells such as bash.
+
+        Starting with March 2009, both commands will be supported for
+        a transition period of 6 months after which "autoscr" will be
+        removed. During the transition period existing scripts and
+        environment variable names remain untouched for maximum
+        compatibiltiy; thse will be changed when support for the
+        "autoscr" command get's finally dropped.
+
 Who:	Peter Tyser <[email protected]>
 
 ---------------------------
include/common.h +2 -2
index 952ddff..20c058a 100644
@@ -234,8 +234,8 @@ int mac_read_from_eeprom(void);
 /* common/flash.c */
 void flash_perror (int);
 
-/* common/cmd_autoscript.c */
-int	autoscript (ulong addr, const char *fit_uname);
+/* common/cmd_source.c */
+int	source (ulong addr, const char *fit_uname);
 
 extern ulong load_addr;		/* Default Load Address */
 
include/config_cmd_all.h +1 -1
index db1f55c..c5e0d26 100644
@@ -15,7 +15,6 @@
 
 #define CONFIG_CMD_AMBAPP	/* AMBA Plug & Play Bus print utility */
 #define CONFIG_CMD_ASKENV	/* ask for env variable		*/
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BEDBUG	/* Include BedBug Debugger	*/
 #define CONFIG_CMD_BMP		/* BMP support			*/
@@ -76,6 +75,7 @@
 #define CONFIG_CMD_SETEXPR	/* setexpr support		*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
 #define CONFIG_CMD_SNTP		/* SNTP support			*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
 #define CONFIG_CMD_SPI		/* SPI utility			*/
 #define CONFIG_CMD_TERMINAL	/* built-in Serial Terminal	*/
 #define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
include/config_cmd_default.h +1 -1
index 3667602..0376e44 100644
@@ -16,7 +16,6 @@
  * hardware, not fully tested, etc.).
  */
 
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BOOTD	/* bootd			*/
 #define CONFIG_CMD_CONSOLE	/* coninfo			*/
@@ -37,6 +36,7 @@
 #define CONFIG_CMD_NFS		/* NFS support			*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
 #define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 #endif	/* _CONFIG_CMD_DEFAULT_H */
include/configs/APC405.h +7 -7
index 7453518..41eaaab 100644
@@ -124,19 +124,19 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_AUTOSCRIPT
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
include/configs/CRAYL1.h +13 -13
index 527c846..150bd29 100644
@@ -74,32 +74,32 @@
 #define	CONFIG_SYS_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
 #define CONFIG_SYS_HUSH_PARSER			1
 #define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
-#define CONFIG_AUTOSCRIPT		1
+#define CONFIG_SOURCE			1
 
 
 /*
  * Command line configuration.
  */
 
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_RUN
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
 
 
 /*
include/configs/DU440.h +6 -6
index 85c0e61..e6abbdc 100644
@@ -290,14 +290,13 @@ int du440_phy_addr(int devnum);
 
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
 #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
@@ -309,9 +308,10 @@ int du440_phy_addr(int devnum);
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_USB
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -428,7 +428,7 @@ int du440_phy_addr(int devnum);
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-#define CONFIG_AUTOSCRIPT	1
+#define CONFIG_SOURCE		1
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
include/configs/EP1C20.h +1 -1
index a0904d4..8941e4d 100644
@@ -180,7 +180,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_BOOTD
 #undef CONFIG_CMD_CONSOLE
 #undef CONFIG_CMD_FPGA
@@ -188,6 +187,7 @@
 #undef CONFIG_CMD_ITEST
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 
include/configs/GEN860T.h +1 -1
index a399d22..8f18ab2 100644
@@ -152,7 +152,7 @@
 
 /*
  * Set default IP stuff just to get bootstrap entries into the
- * environment so that we can autoscript the full default environment.
+ * environment so that we can source the full default environment.
  */
 #define CONFIG_ETHADDR					9a:52:63:15:85:25
 #define CONFIG_SERVERIP					10.0.4.201
include/configs/MVBC_P.h +6 -6
index cd910ea..edbc701 100644
@@ -73,8 +73,8 @@
 #define MV_INITRD_LENGTH	0x00300000
 #define MV_SCRATCH_ADDR		0x00000000
 #define MV_SCRATCH_LENGTH	MV_INITRD_LENGTH
-#define MV_AUTOSCR_ADDR		0xff840000
-#define MV_AUTOSCR_ADDR2	0xff850000
+#define MV_SOURCE_ADDR		0xff840000
+#define MV_SOURCE_ADDR2		0xff850000
 #define MV_DTB_ADDR		0xfffc0000
 
 #define CONFIG_SHOW_BOOT_PROGRESS 1
@@ -130,8 +130,8 @@
 #define CONFIG_RESET_TO_RETRY		1000
 
 #define CONFIG_BOOTCOMMAND	"if imi ${autoscr_addr}; \
-					then autoscr ${autoscr_addr};	\
-					else autoscr ${autoscr_addr2};	\
+					then source ${autoscr_addr};	\
+					else source ${autoscr_addr2};	\
 				fi;"
 
 #define CONFIG_BOOTARGS		"root=/dev/ram ro rootfstype=squashfs"
@@ -149,8 +149,8 @@
 	"fpga=0\0"						\
 	"fpgadata=" MK_STR(MV_FPGA_DATA) "\0"			\
 	"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"		\
-	"autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0"		\
-	"autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0"		\
+	"autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0"		\
+	"autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0"		\
 	"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0"		\
 	"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"	\
 	"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0"		\
include/configs/MVBLM7.h +6 -6
index 4ecf806..3cf3bb2 100644
@@ -411,8 +411,8 @@
 #define MV_FPGA_SIZE		0x00076ca2
 #define MV_KERNEL_ADDR		0xff810000
 #define MV_INITRD_ADDR		0xffb00000
-#define MV_AUTOSCR_ADDR		0xff804000
-#define MV_AUTOSCR_ADDR2	0xff806000
+#define MV_SOURCE_ADDR		0xff804000
+#define MV_SOURCE_ADDR2		0xff806000
 #define MV_DTB_ADDR		0xff808000
 #define MV_INITRD_LENGTH	0x00400000
 
@@ -423,8 +423,8 @@
 #define MV_INITRD_ADDR_RAM	0x01000000
 
 #define CONFIG_BOOTCOMMAND	"if imi ${autoscr_addr}; \
-					then autoscr ${autoscr_addr};  \
-					else autoscr ${autoscr_addr2}; \
+					then source ${autoscr_addr};  \
+					else source ${autoscr_addr2}; \
 				fi;"
 #define CONFIG_BOOTARGS		"root=/dev/ram ro rootfstype=squashfs"
 
@@ -437,8 +437,8 @@
 	"fpga=0\0"						\
 	"fpgadata=" MK_STR(MV_FPGA_DATA) "\0"			\
 	"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"		\
-	"autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0"		\
-	"autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0"		\
+	"autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0"		\
+	"autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0"		\
 	"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0"		\
 	"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"	\
 	"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0"		\
include/configs/NETPHONE.h +1 -1
index 2d04d89..796938a 100644
@@ -71,7 +71,7 @@
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
 	"bootm"
 
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
include/configs/NETTA2.h +1 -1
index 4a27027..a14b2dd 100644
@@ -71,7 +71,7 @@
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
 	"bootm"
 
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
include/configs/NX823.h +2 -2
index 9182223..5054d5e 100644
@@ -55,7 +55,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 #undef	CONFIG_WATCHDOG			/* watchdog disabled, for now	    */
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 
 /*
  * BOOTP options
@@ -72,7 +72,7 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SOURCE
 
 
 /* call various generic functions */
include/configs/PN62.h +3 -3
index 06c11e6..562c5c3 100644
@@ -59,11 +59,11 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_BSP
 
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SAVEENV
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_SOURCE
 
 
 #define CONFIG_BAUDRATE		19200	/* console baudrate		*/
include/configs/TOP860.h +2 -6
index 8c2befb..b9e450d 100644
@@ -125,7 +125,7 @@
 #define CONFIG_CMD_BEDBUG
 
 
-#define	CONFIG_AUTOSCRIPT		1
+#define	CONFIG_SOURCE			1
 #define	CONFIG_SYS_LOADS_BAUD_CHANGE	1
 #undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
 
@@ -419,15 +419,12 @@
 
 /*
  * Set default IP stuff just to get bootstrap entries into the
- * environment so that we can autoscript the full default environment.
+ * environment so that we can source the full default environment.
  */
 #define CONFIG_ETHADDR					9a:52:63:15:85:25
 #define CONFIG_SERVERIP					10.0.4.200
 #define CONFIG_IPADDR					10.0.4.111
 
-/*-----------------------------------------------------------------------
- * Defaults for Autoscript
- */
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 #define	CONFIG_SYS_TFTP_LOADADDR	0x00100000
 
@@ -438,5 +435,4 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-
 #endif	/* __CONFIG_H */
include/configs/TQM5200.h +1 -1
index d374981..fe1d102 100644
@@ -253,7 +253,7 @@
 #define CUSTOM_ENV_SETTINGS						\
 	"bootfile=cam5200/uImage\0"					\
 	"u-boot=cam5200/u-boot.bin\0"					\
-	"setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
+	"setup=tftp 200000 cam5200/setup.img; source 200000\0"
 #endif
 
 #if defined(CONFIG_TQM5200_B)
include/configs/VoVPN-GW.h +2 -2
index 5f9a17f..b2d75e3 100644
@@ -150,11 +150,9 @@
  * Command line configuration.
  */
 
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_CONSOLE
 #define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
 #define CONFIG_CMD_IMLS
@@ -164,6 +162,8 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SOURCE
 
 
 /*
include/configs/afeb9260.h +3 -3
index 33a67ca..fa27119 100644
@@ -69,11 +69,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
include/configs/apollon.h +1 -1
index f83dd9c..b0af2a9 100644
@@ -127,7 +127,7 @@
 #define CONFIG_MTD_PARTITIONS
 #endif
 
-#undef	CONFIG_CMD_AUTOSCRIPT
+#undef	CONFIG_CMD_SOURCE
 
 #ifndef	CONFIG_SYS_USE_NOR
 # undef	CONFIG_CMD_FLASH
include/configs/at91cap9adk.h +2 -2
index 7e7f124..2ddbd17 100644
@@ -91,10 +91,10 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
include/configs/at91sam9260ek.h +3 -3
index 1fae3a3..1a5f9a4 100644
@@ -86,11 +86,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
include/configs/at91sam9261ek.h +3 -3
index 752d7e9..4d50932 100644
@@ -90,11 +90,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
include/configs/at91sam9263ek.h +3 -3
index dd500ca..78e0081 100644
@@ -91,11 +91,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
include/configs/at91sam9rlek.h +3 -3
index 7a4039c..a48f2cb 100644
@@ -82,12 +82,12 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_USB
 
 #define CONFIG_CMD_NAND		1
include/configs/atngw100.h +1 -1
index c998952..4ed5514 100644
@@ -117,9 +117,9 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
include/configs/atstk1002.h +1 -1
index 2284277..b258f2d 100644
@@ -142,9 +142,9 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
include/configs/atstk1006.h +1 -1
index 8cfa312..f93118e 100644
@@ -142,9 +142,9 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
include/configs/eNET.h +3 -3
index 84e1aef..8169d10 100644
@@ -70,16 +70,15 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
 #define CONFIG_CMD_BDI		/* bdinfo			*/
 #define CONFIG_CMD_BOOTD	/* bootd			*/
 #define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_ECHO		/* echo arguments		*/
-#define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
 #define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #define CONFIG_CMD_IMI		/* iminfo			*/
 #define CONFIG_CMD_IMLS		/* List all found images	*/
+#define CONFIG_CMD_IRQ		/* IRQ Information		*/
 #define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
 #define CONFIG_CMD_LOADB	/* loadb			*/
 #define CONFIG_CMD_LOADS	/* loads			*/
@@ -88,9 +87,10 @@
 #undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command Support	*/
 #define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
-#define CONFIG_CMD_IRQ		/* IRQ Information		*/
 
 #define CONFIG_BOOTDELAY		15
 #define CONFIG_BOOTARGS			"root=/dev/mtdblock0 console=ttyS0,9600"
include/configs/favr-32-ezkit.h +1 -1
index 21802df..739ff0d 100644
@@ -139,9 +139,9 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
 
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART		1
include/configs/grsim.h +13 -13
index a9eaa4a..c3f1a31 100644
@@ -65,23 +65,23 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_AMBAPP	/* AMBA Plyg&Play information   */
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support           */
-#define CONFIG_CMD_BDI		/* bdinfo                       */
-#define CONFIG_CMD_CONSOLE	/* coninfo                      */
+#define CONFIG_CMD_AMBAPP	/* AMBA Plyg&Play information	*/
+#define CONFIG_CMD_BDI		/* bdinfo			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO		/* echo arguments               */
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support   */
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST	/* Integer (and string) test    */
-#define CONFIG_CMD_LOADB	/* loadb                        */
-#define CONFIG_CMD_LOADS	/* loads                        */
+#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
 #define CONFIG_CMD_MISC		/* Misc functions like sleep etc */
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot    */
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN		/* run command in env variable  */
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx           */
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image     */
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 /*
  * Autobooting
include/configs/grsim_leon2.h +11 -11
index 58f26fd..7ebbf25 100644
@@ -64,21 +64,21 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support           */
-#define CONFIG_CMD_BDI		/* bdinfo                       */
-#define CONFIG_CMD_CONSOLE	/* coninfo                      */
+#define CONFIG_CMD_BDI		/* bdinfo			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO		/* echo arguments               */
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support   */
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST	/* Integer (and string) test    */
-#define CONFIG_CMD_LOADB	/* loadb                        */
-#define CONFIG_CMD_LOADS	/* loads                        */
+#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
 #define CONFIG_CMD_MISC		/* Misc functions like sleep etc */
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN		/* run command in env variable  */
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx           */
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image     */
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 /*
  * Autobooting
include/configs/gth2.h +7 -7
index b1b4842..677baea 100644
@@ -90,18 +90,18 @@
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_ELF
 #undef CONFIG_CMD_FAT
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_MII
 #undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_SOURCE
 
 
 /*
include/configs/keymile-common.h +1 -1
index 58b95f4..b2e37ec 100644
@@ -240,7 +240,7 @@
 		"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0"	\
 	"new_esw=run set_new_esw_script; "				\
 		"tftp ${autoscr_ws} ${new_esw_script}; "		\
-		"iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0"	\
+		"iminfo ${autoscr_ws}; source ${autoscr_ws} \0"	\
 	"bootlimit=0 \0" 						\
 	CONFIG_KM_DEF_ENV_IOMUX						\
 	CONFIG_KM_DEF_ENV_PRIVATE					\
include/configs/lwmon.h +2 -2
index d52a5e0..8f00773 100644
@@ -93,7 +93,7 @@
  * 3 = 0x3C+0x3F = F3 + F6 :	enable test mode
  */
 
-#define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv"
+#define CONFIG_BOOTCOMMAND "source 40040000;saveenv"
 
 /*	"gatewayip=10.8.211.250\0"			                \ */
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -108,7 +108,7 @@
 	"key_magic2=3A+3C\0"						\
 	"key_cmd2=echo *** Entering Update Mode ***;"			\
 		"if fatload ide 0:3 10000 update.scr;"			\
-			"then autoscr 10000;"				\
+			"then source 10000;"				\
 			"else echo *** UPDATE FAILED ***;"		\
 		"fi\0"							\
 	"key_magic3=3C+3F\0"						\
include/configs/lwmon5.h +1 -1
index 05055c8..777a4d6 100644
@@ -313,7 +313,7 @@
 		"cp.b 200000 FFF80000 80000\0"			        \
 	"upd=run load update\0"						\
 	"lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;"	\
-		"autoscr 200000\0"					\
+		"source 200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
include/configs/mp2usb.h +2 -2
index 9ac7e9a..edaa174 100644
@@ -163,15 +163,15 @@
 
 #else
 
-    #define CONFIG_CMD_USB
     #define CONFIG_CMD_CACHE
+    #define CONFIG_CMD_USB
 
-    #undef CONFIG_CMD_AUTOSCRIPT
     #undef CONFIG_CMD_BDI
     #undef CONFIG_CMD_FPGA
     #undef CONFIG_CMD_IMI
     #undef CONFIG_CMD_LOADS
     #undef CONFIG_CMD_MISC
+    #undef CONFIG_CMD_SOURCE
 
 #endif
 
include/configs/mx1fs2.h +3 -3
index a19eb78..cba0803 100644
@@ -51,12 +51,12 @@
 
 #define CONFIG_CMD_JFFS2
 
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_SOURCE
 
 
 /*
include/configs/omap2420h4.h +1 -1
index 983b5f2..13b89ac 100644
@@ -135,7 +135,7 @@
     #define CONFIG_CMD_I2C
     #define CONFIG_CMD_JFFS2
 
-    #undef CONFIG_CMD_AUTOSCRIPT
+    #undef CONFIG_CMD_SOURCE
 #endif
 
 
include/configs/omap3_beagle.h +1 -1
index 0f9344b..c20981c 100644
@@ -174,7 +174,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
include/configs/omap3_evm.h +1 -1
index f4498a9..db82899 100644
@@ -167,7 +167,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
include/configs/omap3_overo.h +1 -1
index dee0417..64cc1c4 100644
@@ -161,7 +161,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
include/configs/omap3_pandora.h +1 -1
index 00c0374..592ec75 100644
@@ -163,7 +163,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
include/configs/omap3_zoom1.h +1 -1
index f8ae163..70ec036 100644
@@ -171,7 +171,7 @@
 		"rootfstype=jffs2\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"autoscr ${loadaddr}\0" \
+		"source ${loadaddr}\0" \
 	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
include/configs/sc3.h +12 -12
index 5b68ef9..97e1da2 100644
@@ -122,7 +122,7 @@
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/sc3/uImage\0"				\
 	"u-boot=/tftpboot/sc3/u-boot.bin\0"				\
-	"setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0"	\
+	"setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0"	\
 	"kernel_addr=FFE08000\0"					\
 	""
 #undef CONFIG_BOOTCOMMAND
@@ -186,20 +186,20 @@
 #include <config_cmd_default.h>
 
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SOURCE
 
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
include/configs/scb9328.h +2 -2
index 5971df7..a038901 100644
@@ -53,9 +53,9 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 
 /*
include/configs/stxxtc.h +1 -1
index 5a5f772..147233d 100644
@@ -68,7 +68,7 @@
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
 	"bootm"
 
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
include/configs/vct.h +19 -19
index 5371e2d..d202522 100644
@@ -301,38 +301,38 @@ int vct_gpio_get(int pin);
  * (NOR/OneNAND) usage and Linux kernel booting.
  */
 #if defined(CONFIG_VCT_SMALL_IMAGE)
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
 #undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SNTP
 #undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_I2C
 #undef CONFIG_CMD_IRQ
 #undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADY
 #undef CONFIG_CMD_MII
 #undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
 #undef CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_STRINGS
 #undef CONFIG_CMD_TERMINAL
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_CRC32
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_USB
-#undef CONFIG_CMD_FAT
 
 #undef CONFIG_DRIVER_SMC911X
 #undef CONFIG_SOFT_I2C
-#undef CONFIG_AUTOSCRIPT
+#undef CONFIG_SOURCE
 #undef CONFIG_SYS_LONGHELP
 #undef CONFIG_TIMESTAMP
 #endif /* CONFIG_VCT_SMALL_IMAGE */
include/configs/wepep250.h +3 -3
index d0afd29..1d529b3 100644
@@ -49,10 +49,10 @@
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
 
 
 /*
Signature · 1 line
1.6.0.6
author Applied
#1 lore raw

PATCH 1/1 Add "source" command; prepare removal of "autoscr" command

Quoted 78 lines · In message <[email protected]> I wrote:

According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now.

This patch prepares this change and starts a 6 month transition period as follows:

- The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the new "source" command
- Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped.

---
Changes since V1:
- add DEPRECATED warning message to "autoscr" help text.
- Print DEPRECATED warning message whenever "autoscr" command gets used.

 README                           |   10 +-
 board/cray/L1/L1.c               |    2 +-
 board/cray/L1/bootscript.hush    |    2 +-
 board/esd/common/cmd_loadpci.c   |    6 +-
 board/pn62/cmd_pn62.c            |    7 +-
 common/Makefile                  |    4 +-
 common/cmd_autoscript.c          |  241 -----------------------------------
 common/cmd_load.c                |    7 +-
 common/cmd_net.c                 |    7 +-
 common/cmd_source.c              |  256 ++++++++++++++++++++++++++++++++++++++
 doc/feature-removal-schedule.txt |   20 ++-
 include/common.h                 |    4 +-
 include/config_cmd_all.h         |    2 +-
 include/config_cmd_default.h     |    2 +-
 include/configs/APC405.h         |   14 +-
 include/configs/CRAYL1.h         |   26 ++--
 include/configs/DU440.h          |   12 +-
 include/configs/EP1C20.h         |    2 +-
 include/configs/GEN860T.h        |    2 +-
 include/configs/MVBC_P.h         |   12 +-
 include/configs/MVBLM7.h         |   12 +-
 include/configs/NETPHONE.h       |    2 +-
 include/configs/NETTA2.h         |    2 +-
 include/configs/NX823.h          |    4 +-
 include/configs/PN62.h           |    6 +-
 include/configs/TOP860.h         |    8 +-
 include/configs/TQM5200.h        |    2 +-
 include/configs/VoVPN-GW.h       |    4 +-
 include/configs/afeb9260.h       |    6 +-
 include/configs/apollon.h        |    2 +-
 include/configs/at91cap9adk.h    |    4 +-
 include/configs/at91sam9260ek.h  |    6 +-
 include/configs/at91sam9261ek.h  |    6 +-
 include/configs/at91sam9263ek.h  |    6 +-
 include/configs/at91sam9rlek.h   |    6 +-
 include/configs/atngw100.h       |    2 +-
 include/configs/atstk1002.h      |    2 +-
 include/configs/atstk1006.h      |    2 +-
 include/configs/eNET.h           |    6 +-
 include/configs/favr-32-ezkit.h  |    2 +-
 include/configs/grsim.h          |   26 ++--
 include/configs/grsim_leon2.h    |   22 ++--
 include/configs/gth2.h           |   14 +-
 include/configs/keymile-common.h |    2 +-
 include/configs/lwmon.h          |    4 +-
 include/configs/lwmon5.h         |    2 +-
 include/configs/mp2usb.h         |    4 +-
 include/configs/mx1fs2.h         |    6 +-
 include/configs/omap2420h4.h     |    2 +-
 include/configs/omap3_beagle.h   |    2 +-
 include/configs/omap3_evm.h      |    2 +-
 include/configs/omap3_overo.h    |    2 +-
 include/configs/omap3_pandora.h  |    2 +-
 include/configs/omap3_zoom1.h    |    2 +-
Quoted 8 lines
 include/configs/sc3.h            |   24 ++--
 include/configs/scb9328.h        |    4 +-
 include/configs/stxxtc.h         |    2 +-
 include/configs/vct.h            |   38 +++---
 include/configs/wepep250.h       |    6 +-
 59 files changed, 458 insertions(+), 436 deletions(-)
 delete mode 100644 common/cmd_autoscript.c
 create mode 100644 common/cmd_source.c

Applied.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The most exciting phrase to hear in science, the one that heralds new
discoveries, is not "Eureka!" (I found it!) but "That's funny ..."
                                                      -- Isaac Asimov