Add "source" command; prepare removal of "autoscr" command
PATCH 1/1 Add "source" command; prepare removal of "autoscr" command
According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now.
This patch prepares this change and starts a 6 month transition period as follows:
- The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the new "source" command
- Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped.
---
Changes since V1:
- add DEPRECATED warning message to "autoscr" help text.
- Print DEPRECATED warning message whenever "autoscr" command gets used.
README | 10 +- board/cray/L1/L1.c | 2 +- board/cray/L1/bootscript.hush | 2 +- board/esd/common/cmd_loadpci.c | 6 +- board/pn62/cmd_pn62.c | 7 +- common/Makefile | 4 +- common/cmd_autoscript.c | 241 ----------------------------------- common/cmd_load.c | 7 +- common/cmd_net.c | 7 +- common/cmd_source.c | 256 ++++++++++++++++++++++++++++++++++++++ doc/feature-removal-schedule.txt | 20 ++- include/common.h | 4 +- include/config_cmd_all.h | 2 +- include/config_cmd_default.h | 2 +- include/configs/APC405.h | 14 +- include/configs/CRAYL1.h | 26 ++-- include/configs/DU440.h | 12 +- include/configs/EP1C20.h | 2 +- include/configs/GEN860T.h | 2 +- include/configs/MVBC_P.h | 12 +- include/configs/MVBLM7.h | 12 +- include/configs/NETPHONE.h | 2 +- include/configs/NETTA2.h | 2 +- include/configs/NX823.h | 4 +- include/configs/PN62.h | 6 +- include/configs/TOP860.h | 8 +- include/configs/TQM5200.h | 2 +- include/configs/VoVPN-GW.h | 4 +- include/configs/afeb9260.h | 6 +- include/configs/apollon.h | 2 +- include/configs/at91cap9adk.h | 4 +- include/configs/at91sam9260ek.h | 6 +- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 6 +- include/configs/at91sam9rlek.h | 6 +- include/configs/atngw100.h | 2 +- include/configs/atstk1002.h | 2 +- include/configs/atstk1006.h | 2 +- include/configs/eNET.h | 6 +- include/configs/favr-32-ezkit.h | 2 +- include/configs/grsim.h | 26 ++-- include/configs/grsim_leon2.h | 22 ++-- include/configs/gth2.h | 14 +- include/configs/keymile-common.h | 2 +- include/configs/lwmon.h | 4 +- include/configs/lwmon5.h | 2 +- include/configs/mp2usb.h | 4 +- include/configs/mx1fs2.h | 6 +- include/configs/omap2420h4.h | 2 +- include/configs/omap3_beagle.h | 2 +- include/configs/omap3_evm.h | 2 +- include/configs/omap3_overo.h | 2 +- include/configs/omap3_pandora.h | 2 +- include/configs/omap3_zoom1.h | 2 +- include/configs/sc3.h | 24 ++-- include/configs/scb9328.h | 4 +- include/configs/stxxtc.h | 2 +- include/configs/vct.h | 38 +++--- include/configs/wepep250.h | 6 +- 59 files changed, 458 insertions(+), 436 deletions(-) delete mode 100644 common/cmd_autoscript.c create mode 100644 common/cmd_source.c
README +5 -5
@@ -593,7 +593,6 @@ The following options need to be configured: except those marked below with a "*". CONFIG_CMD_ASKENV * ask for env variable - CONFIG_CMD_AUTOSCRIPT Autoscript Support CONFIG_CMD_BDI bdinfo CONFIG_CMD_BEDBUG * Include BedBug Debugger CONFIG_CMD_BMP * BMP support
@@ -654,6 +653,7 @@ The following options need to be configured: (requires CONFIG_CMD_I2C) CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) + CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support CONFIG_CMD_VFD * VFD support (TRAB)
@@ -1789,7 +1789,7 @@ The following options need to be configured: Note: overly (ab)use of the default environment is discouraged. Make sure to check other ways to preset - the environment like the autoscript function or the + the environment like the "source" command or the boot command first. - DataFlash Support:
@@ -1948,8 +1948,8 @@ Legacy uImage format: 81 common/cmd_net.c NetLoop() back without error -82 common/cmd_net.c size == 0 (File with size 0 loaded) 82 common/cmd_net.c trying automatic boot - 83 common/cmd_net.c running autoscript - -83 common/cmd_net.c some error in automatic boot or autoscript + 83 common/cmd_net.c running "source" command + -83 common/cmd_net.c some error in automatic boot or "source" command 84 common/cmd_net.c end without errors FIT uImage format:
@@ -2952,7 +2952,7 @@ Some configuration options can be set using Environment Variables: autoscript - if set to "yes" commands like "loadb", "loady", "bootp", "tftpb", "rarpboot" and "nfs" will attempt to automatically run script images (by internally - calling "autoscript"). + calling "source"). autoscript_uname - if script image is in a format (FIT) this variable is used to get script subimage unit name.
board/cray/L1/L1.c +1 -1
@@ -164,7 +164,7 @@ int misc_init_r (void)setenv ("ethaddr" , e); } } -sprintf (bootcmd,"autoscript %X" ,(unsigned )bootscript); +sprintf (bootcmd,"source %X" ,(unsigned )bootscript);setenv ("bootcmd" , bootcmd);return (0 ); }
board/cray/L1/bootscript.hush +1 -1
@@ -31,7 +31,7 @@ if printenv bootscript tftp $tftp_addr $bootcript if imi $tftp_addr then - autoscript $tftp_addr + source $tftp_addr fi fi
board/esd/common/cmd_loadpci.c +3 -3
@@ -30,7 +30,7 @@#if defined(CONFIG_CMD_BSP )extern int do_bootm (cmd_tbl_t *,int ,int ,char *[]); -extern int do_autoscript (cmd_tbl_t *,int ,int ,char *[]); +extern int do_source (cmd_tbl_t *,int ,int ,char *[]);#define ADDRMASK 0xfffff000
@@ -98,12 +98,12 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])case 1 :/* -* Boot image via autoscr +* Boot image via "source" command */ printf ("executing script at addr 0x%s ...\n" , addr); local_args[0 ] = addr; local_args[1 ] =NULL ; -do_autoscript (cmdtp,0 ,1 , local_args); +do_source (cmdtp,0 ,1 , local_args);break ;case 2 :
board/pn62/cmd_pn62.c +4 -3
@@ -152,12 +152,13 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) rcode =do_bootm (cmdtp,0 ,1 , local_args); } -#ifdef CONFIG_AUTOSCRIPT +#ifdef CONFIG_SOURCE if (load_addr) {char *s;if (((s =getenv ("autoscript" )) !=NULL ) && (strcmp (s,"yes" ) ==0 )) { -printf ("Running autoscript at addr 0x%08lX" , load_addr); +printf ("Running " source" command at addr 0x%08lX" , + load_addr); s =getenv ("autoscript_uname" );if (s)
@@ -165,7 +166,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else puts (" ...\n"); - rcode = autoscript (load_addr, s); + rcode = source (load_addr, s); } }#endif
common/Makefile +2 -2
@@ -61,8 +61,8 @@ COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o # command COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o -COBJS-$(CONFIG_AUTOSCRIPT) += cmd_autoscript.o -COBJS-$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o +COBJS-$(CONFIG_SOURCE) += cmd_source.o +COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
common/cmd_autoscript.c deleted +0 -241
241 lines not on this page · raw message
common/cmd_load.c +4 -3
@@ -513,12 +513,13 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } -#ifdef CONFIG_AUTOSCRIPT +#ifdef CONFIG_SOURCE if (load_addr) {char *s;if (((s =getenv ("autoscript" )) !=NULL ) && (strcmp (s,"yes" ) ==0 )) { -printf ("Running autoscript at addr 0x%08lX" , load_addr); +printf ("Running " source" command at addr 0x%08lX" , + load_addr); s =getenv ("autoscript_uname" );if (s)
@@ -526,7 +527,7 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else puts (" ...\n"); - rcode = autoscript (load_addr, s); + rcode = source (load_addr, s); } }#endif
common/cmd_net.c +4 -3
@@ -222,9 +222,10 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) rcode =do_bootm (cmdtp,0 ,1 , local_args); } -#ifdef CONFIG_AUTOSCRIPT +#ifdef CONFIG_SOURCE if (((s =getenv ("autoscript" )) !=NULL ) && (strcmp (s,"yes" ) ==0 )) { -printf ("Running autoscript at addr 0x%08lX" , load_addr); +printf ("Running " source" command at addr 0x%08lX" , + load_addr); s =getenv ("autoscript_uname" );if (s)
@@ -233,7 +234,7 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])puts (" ...\n" );show_boot_progress (83 ); - rcode = autoscript (load_addr, s); + rcode = source (load_addr, s); }#endif if (rcode <0 )
common/cmd_source.c new file +256 -0
256 lines not on this page · raw message
doc/feature-removal-schedule.txt +14 -6
@@ -8,12 +8,20 @@ file. --------------------------- What: "autoscr" command -When: August 2009 -Why: "autosrc" is an ugly and completely non-standard name. The "autoscr" - command is deprecated and will be replaced the "source" command as - used by other shells such as bash. Both commands will be supported - for a transition period of 6 months after which "autoscr" will be - removed. +When: Release 2009-09 + +Why: "autosrc" is an ugly and completely non-standard name. + The "autoscr" command is deprecated and will be replaced by + + the "source" command as used by other shells such as bash. + + Starting with March 2009, both commands will be supported for + a transition period of 6 months after which "autoscr" will be + removed. During the transition period existing scripts and + environment variable names remain untouched for maximum + compatibiltiy; thse will be changed when support for the + "autoscr" command get's finally dropped. + Who: Peter Tyser <[email protected]> ---------------------------
include/common.h +2 -2
@@ -234,8 +234,8 @@ int mac_read_from_eeprom(void);/* common/flash.c */ void flash_perror (int ); -/* common/cmd_autoscript.c */ -int autoscript (ulong addr,const char *fit_uname); +/* common/cmd_source.c */ +int source (ulong addr,const char *fit_uname);extern ulong load_addr;/* Default Load Address */
include/config_cmd_all.h +1 -1
@@ -15,7 +15,6 @@#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ #define CONFIG_CMD_ASKENV /* ask for env variable */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ #define CONFIG_CMD_BMP /* BMP support */
@@ -76,6 +75,7 @@#define CONFIG_CMD_SETEXPR /* setexpr support */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_CMD_SNTP /* SNTP support */ +#define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_SPI /* SPI utility */ #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
include/config_cmd_default.h +1 -1
@@ -16,7 +16,6 @@* hardware, not fully tested, etc.). */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */
@@ -37,6 +36,7 @@#define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ #endif /* _CONFIG_CMD_DEFAULT_H */
include/configs/APC405.h +7 -7
@@ -124,19 +124,19 @@*/ #include <config_cmd_default.h> +#define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT +#define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE +#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ #define CONFIG_CMD_MII +#define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_SOURCE #define CONFIG_CMD_USB -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION
include/configs/CRAYL1.h +13 -13
@@ -74,32 +74,32 @@#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HUSH_PARSER 1#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTOSCRIPT 1 +#define CONFIG_SOURCE 1/* * Command line configuration. */ +#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BDI -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG #define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMI #define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE #define CONFIG_CMD_RUN -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_SOURCE /*
include/configs/DU440.h +6 -6
@@ -290,14 +290,13 @@ int du440_phy_addr(int devnum);#include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_BSP +#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP #define CONFIG_CMD_DATE -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DTT #define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT
@@ -309,9 +308,10 @@ int du440_phy_addr(int devnum);#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_USB #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_USB #define CONFIG_SUPPORT_VFAT
@@ -428,7 +428,7 @@ int du440_phy_addr(int devnum);#define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */ #endif -#define CONFIG_AUTOSCRIPT 1 +#define CONFIG_SOURCE 1#define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP
include/configs/EP1C20.h +1 -1
@@ -180,7 +180,6 @@#define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_BOOTD#undef CONFIG_CMD_CONSOLE#undef CONFIG_CMD_FPGA
@@ -188,6 +187,7 @@#undef CONFIG_CMD_ITEST#undef CONFIG_CMD_NFS#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_XIMG
include/configs/GEN860T.h +1 -1
@@ -152,7 +152,7 @@/* * Set default IP stuff just to get bootstrap entries into the -* environment so that we can autoscript the full default environment. +* environment so that we can source the full default environment. */ #define CONFIG_ETHADDR 9a:52:63:15:85:25#define CONFIG_SERVERIP 10.0.4.201
include/configs/MVBC_P.h +6 -6
@@ -73,8 +73,8 @@#define MV_INITRD_LENGTH 0x00300000#define MV_SCRATCH_ADDR 0x00000000#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH -#define MV_AUTOSCR_ADDR 0xff840000 -#define MV_AUTOSCR_ADDR2 0xff850000 +#define MV_SOURCE_ADDR 0xff840000 +#define MV_SOURCE_ADDR2 0xff850000#define MV_DTB_ADDR 0xfffc0000#define CONFIG_SHOW_BOOT_PROGRESS 1
@@ -130,8 +130,8 @@#define CONFIG_RESET_TO_RETRY 1000#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ - then autoscr ${autoscr_addr}; \ - else autoscr ${autoscr_addr2}; \ + then source ${autoscr_addr}; \ + else source ${autoscr_addr2}; \ fi;"#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
@@ -149,8 +149,8 @@"fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ - "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ - "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ + "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \ + "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
include/configs/MVBLM7.h +6 -6
@@ -411,8 +411,8 @@#define MV_FPGA_SIZE 0x00076ca2#define MV_KERNEL_ADDR 0xff810000#define MV_INITRD_ADDR 0xffb00000 -#define MV_AUTOSCR_ADDR 0xff804000 -#define MV_AUTOSCR_ADDR2 0xff806000 +#define MV_SOURCE_ADDR 0xff804000 +#define MV_SOURCE_ADDR2 0xff806000#define MV_DTB_ADDR 0xff808000#define MV_INITRD_LENGTH 0x00400000
@@ -423,8 +423,8 @@#define MV_INITRD_ADDR_RAM 0x01000000#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ - then autoscr ${autoscr_addr}; \ - else autoscr ${autoscr_addr2}; \ + then source ${autoscr_addr}; \ + else source ${autoscr_addr2}; \ fi;"#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
@@ -437,8 +437,8 @@"fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ - "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ - "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ + "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \ + "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
include/configs/NETPHONE.h +1 -1
@@ -71,7 +71,7 @@"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE #define CONFIG_LOADS_ECHO 0/* echo off for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE/* don't allow baudrate change */
include/configs/NETTA2.h +1 -1
@@ -71,7 +71,7 @@"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ "bootm" -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE #define CONFIG_LOADS_ECHO 0/* echo off for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE/* don't allow baudrate change */
include/configs/NX823.h +2 -2
@@ -55,7 +55,7 @@#define CONFIG_LOADS_ECHO 1/* echo on for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE/* don't allow baudrate change */ #undef CONFIG_WATCHDOG/* watchdog disabled, for now */ -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE /* * BOOTP options
@@ -72,7 +72,7 @@*/ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_SOURCE /* call various generic functions */
include/configs/PN62.h +3 -3
@@ -59,11 +59,11 @@#define CONFIG_CMD_PCI #define CONFIG_CMD_BSP -#undef CONFIG_CMD_AUTOSCRIPT -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SAVEENV#undef CONFIG_CMD_FLASH#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SAVEENV +#undef CONFIG_CMD_SOURCE#define CONFIG_BAUDRATE 19200/* console baudrate */
include/configs/TOP860.h +2 -6
@@ -125,7 +125,7 @@#define CONFIG_CMD_BEDBUG -#define CONFIG_AUTOSCRIPT 1 +#define CONFIG_SOURCE 1#define CONFIG_SYS_LOADS_BAUD_CHANGE 1#undef CONFIG_LOADS_ECHO/* NO echo on for serial download */
@@ -419,15 +419,12 @@/* * Set default IP stuff just to get bootstrap entries into the -* environment so that we can autoscript the full default environment. +* environment so that we can source the full default environment. */ #define CONFIG_ETHADDR 9a:52:63:15:85:25#define CONFIG_SERVERIP 10.0.4.200#define CONFIG_IPADDR 10.0.4.111 -/*----------------------------------------------------------------------- -* Defaults for Autoscript -*/ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ #define CONFIG_SYS_TFTP_LOADADDR 0x00100000
@@ -438,5 +435,4 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -#endif /* __CONFIG_H */
include/configs/TQM5200.h +1 -1
@@ -253,7 +253,7 @@#define CUSTOM_ENV_SETTINGS \ "bootfile=cam5200/uImage\0" \ "u-boot=cam5200/u-boot.bin\0" \ - "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" + "setup=tftp 200000 cam5200/setup.img; source 200000\0"#endif #if defined(CONFIG_TQM5200_B )
include/configs/VoVPN-GW.h +2 -2
@@ -150,11 +150,9 @@* Command line configuration. */ -#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BDI #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IMLS
@@ -164,6 +162,8 @@#define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SOURCE /*
include/configs/afeb9260.h +3 -3
@@ -69,11 +69,11 @@*/ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE#define CONFIG_CMD_PING 1#define CONFIG_CMD_DHCP 1
include/configs/apollon.h +1 -1
@@ -127,7 +127,7 @@#define CONFIG_MTD_PARTITIONS #endif -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SOURCE#ifndef CONFIG_SYS_USE_NOR # undef CONFIG_CMD_FLASH
include/configs/at91cap9adk.h +2 -2
@@ -91,10 +91,10 @@*/ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE#define CONFIG_CMD_PING 1#define CONFIG_CMD_DHCP 1
include/configs/at91sam9260ek.h +3 -3
@@ -86,11 +86,11 @@*/ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE#define CONFIG_CMD_PING 1#define CONFIG_CMD_DHCP 1
include/configs/at91sam9261ek.h +3 -3
@@ -90,11 +90,11 @@*/ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE#define CONFIG_CMD_PING 1#define CONFIG_CMD_DHCP 1
include/configs/at91sam9263ek.h +3 -3
@@ -91,11 +91,11 @@*/ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE#define CONFIG_CMD_PING 1#define CONFIG_CMD_DHCP 1
include/configs/at91sam9rlek.h +3 -3
@@ -82,12 +82,12 @@*/ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMI#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_NET +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_USB#define CONFIG_CMD_NAND 1
include/configs/atngw100.h +1 -1
@@ -117,9 +117,9 @@#define CONFIG_CMD_SF #define CONFIG_CMD_SPI -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_XIMG#define CONFIG_ATMEL_USART 1
include/configs/atstk1002.h +1 -1
@@ -142,9 +142,9 @@#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_XIMG#define CONFIG_ATMEL_USART 1
include/configs/atstk1006.h +1 -1
@@ -142,9 +142,9 @@#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_XIMG#define CONFIG_ATMEL_USART 1
include/configs/eNET.h +3 -3
@@ -70,16 +70,15 @@*/ #include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ #define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IMI /* iminfo */ #define CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_IRQ /* IRQ Information */ #define CONFIG_CMD_ITEST /* Integer (and string) test */ #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */
@@ -88,9 +87,10 @@#undef CONFIG_CMD_NET/* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS/* NFS support */ #define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command Support */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ -#define CONFIG_CMD_IRQ /* IRQ Information */ #define CONFIG_BOOTDELAY 15#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
include/configs/favr-32-ezkit.h +1 -1
@@ -139,9 +139,9 @@#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_FPGA#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_XIMG#define CONFIG_ATMEL_USART 1
include/configs/grsim.h +13 -13
@@ -65,23 +65,23 @@/* * Supported commands */ -#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */ +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc */ -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#define CONFIG_CMD_XIMG /* Load part of Multi Image */ /* * Autobooting
include/configs/grsim_leon2.h +11 -11
@@ -64,21 +64,21 @@/* * Supported commands */ -#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */ -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#define CONFIG_CMD_XIMG /* Load part of Multi Image */ /* * Autobooting
include/configs/gth2.h +7 -7
@@ -90,18 +90,18 @@#define CONFIG_CMD_IDE #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_SAVEENV +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_ELF#undef CONFIG_CMD_FAT#undef CONFIG_CMD_FLASH#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_MII#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SAVEENV +#undef CONFIG_CMD_SOURCE/*
include/configs/keymile-common.h +1 -1
@@ -240,7 +240,7 @@"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \"new_esw=run set_new_esw_script; " \"tftp ${autoscr_ws} ${new_esw_script}; " \ -"iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ +"iminfo ${autoscr_ws}; source ${autoscr_ws} \0" \"bootlimit=0 \0" \CONFIG_KM_DEF_ENV_IOMUX \CONFIG_KM_DEF_ENV_PRIVATE \
include/configs/lwmon.h +2 -2
@@ -93,7 +93,7 @@* 3 = 0x3C+0x3F = F3 + F6 : enable test mode */ -#define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv" +#define CONFIG_BOOTCOMMAND "source 40040000;saveenv"/* "gatewayip=10.8.211.250\0" \ */ #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -108,7 +108,7 @@"key_magic2=3A+3C\0" \"key_cmd2=echo *** Entering Update Mode ***;" \"if fatload ide 0:3 10000 update.scr;" \ -"then autoscr 10000;" \ +"then source 10000;" \"else echo *** UPDATE FAILED ***;" \"fi\0" \"key_magic3=3C+3F\0" \
include/configs/lwmon5.h +1 -1
@@ -313,7 +313,7 @@"cp.b 200000 FFF80000 80000\0" \"upd=run load update\0" \"lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ -"autoscr 200000\0" \ +"source 200000\0" \"" #define CONFIG_BOOTCOMMAND "run flash_self"
include/configs/mp2usb.h +2 -2
@@ -163,15 +163,15 @@#else -#define CONFIG_CMD_USB #define CONFIG_CMD_CACHE +#define CONFIG_CMD_USB -#undef CONFIG_CMD_AUTOSCRIPT#undef CONFIG_CMD_BDI#undef CONFIG_CMD_FPGA#undef CONFIG_CMD_IMI#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_SOURCE#endif
include/configs/mx1fs2.h +3 -3
@@ -51,12 +51,12 @@#define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_NET#undef CONFIG_CMD_PING -#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_SOURCE/*
include/configs/omap2420h4.h +1 -1
@@ -135,7 +135,7 @@#define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SOURCE#endif
include/configs/omap3_beagle.h +1 -1
@@ -174,7 +174,7 @@"rootfstype=jffs2\0" \"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \"bootscript=echo Running bootscript from mmc ...; " \ -"autoscr ${loadaddr}\0" \ +"source ${loadaddr}\0" \"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \
include/configs/omap3_evm.h +1 -1
@@ -167,7 +167,7 @@"rootfstype=jffs2\0" \"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \"bootscript=echo Running bootscript from mmc ...; " \ -"autoscr ${loadaddr}\0" \ +"source ${loadaddr}\0" \"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \
include/configs/omap3_overo.h +1 -1
@@ -161,7 +161,7 @@"rootfstype=jffs2\0" \"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \"bootscript=echo Running bootscript from mmc ...; " \ -"autoscr ${loadaddr}\0" \ +"source ${loadaddr}\0" \"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \
include/configs/omap3_pandora.h +1 -1
@@ -163,7 +163,7 @@"rootfstype=jffs2\0" \"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \"bootscript=echo Running bootscript from mmc ...; " \ -"autoscr ${loadaddr}\0" \ +"source ${loadaddr}\0" \"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \
include/configs/omap3_zoom1.h +1 -1
@@ -171,7 +171,7 @@"rootfstype=jffs2\0" \"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \"bootscript=echo Running bootscript from mmc ...; " \ -"autoscr ${loadaddr}\0" \ +"source ${loadaddr}\0" \"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \
include/configs/sc3.h +12 -12
@@ -122,7 +122,7 @@"rootpath=/opt/eldk/ppc_4xx\0" \"bootfile=/tftpboot/sc3/uImage\0" \"u-boot=/tftpboot/sc3/u-boot.bin\0" \ -"setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0" \ +"setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0" \"kernel_addr=FFE08000\0" \"" #undef CONFIG_BOOTCOMMAND
@@ -186,20 +186,20 @@#include <config_cmd_default.h> -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE +#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_CACHE #define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SOURCE #undef CONFIG_WATCHDOG/* watchdog disabled */
include/configs/scb9328.h +2 -2
@@ -53,9 +53,9 @@#define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE/*
include/configs/stxxtc.h +1 -1
@@ -68,7 +68,7 @@"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ "bootm" -#define CONFIG_AUTOSCRIPT +#define CONFIG_SOURCE #define CONFIG_LOADS_ECHO 0/* echo off for serial download */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE/* don't allow baudrate change */
include/configs/vct.h +19 -19
@@ -301,38 +301,38 @@ int vct_gpio_get(int pin);* (NOR/OneNAND) usage and Linux kernel booting. */ #if defined(CONFIG_VCT_SMALL_IMAGE ) +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_CRC32 +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_PING -#undef CONFIG_CMD_SNTP#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_I2C#undef CONFIG_CMD_IRQ#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADY#undef CONFIG_CMD_MII#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING#undef CONFIG_CMD_REGINFO +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_SOURCE#undef CONFIG_CMD_STRINGS#undef CONFIG_CMD_TERMINAL -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_CRC32 -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADY -#undef CONFIG_CMD_BDI#undef CONFIG_CMD_USB -#undef CONFIG_CMD_FAT#undef CONFIG_DRIVER_SMC911X#undef CONFIG_SOFT_I2C -#undef CONFIG_AUTOSCRIPT +#undef CONFIG_SOURCE#undef CONFIG_SYS_LONGHELP#undef CONFIG_TIMESTAMP#endif /* CONFIG_VCT_SMALL_IMAGE */
include/configs/wepep250.h +3 -3
@@ -49,10 +49,10 @@*/ #include <config_cmd_default.h> -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_LOADS#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_SOURCE/*
Signature · 1 line
1.6.0.6
Wolfgang Denk
AppliedPATCH 1/1 Add "source" command; prepare removal of "autoscr" command
Quoted 78 lines · In message <[email protected]> I wrote:
According to the
doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now.This patch prepares this change and starts a 6 month transition period as follows:
- The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the new "source" command
- Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped.Signed-off-by Wolfgang Denk <[email protected]>---
Changes since V1:
- add DEPRECATED warning message to "autoscr" help text.
- Print DEPRECATED warning message whenever "autoscr" command gets used.README | 10 +- board/cray/L1/L1.c | 2 +- board/cray/L1/bootscript.hush | 2 +- board/esd/common/cmd_loadpci.c | 6 +- board/pn62/cmd_pn62.c | 7 +- common/Makefile | 4 +- common/cmd_autoscript.c | 241 ----------------------------------- common/cmd_load.c | 7 +- common/cmd_net.c | 7 +- common/cmd_source.c | 256 ++++++++++++++++++++++++++++++++++++++ doc/feature-removal-schedule.txt | 20 ++- include/common.h | 4 +- include/config_cmd_all.h | 2 +- include/config_cmd_default.h | 2 +- include/configs/APC405.h | 14 +- include/configs/CRAYL1.h | 26 ++-- include/configs/DU440.h | 12 +- include/configs/EP1C20.h | 2 +- include/configs/GEN860T.h | 2 +- include/configs/MVBC_P.h | 12 +- include/configs/MVBLM7.h | 12 +- include/configs/NETPHONE.h | 2 +- include/configs/NETTA2.h | 2 +- include/configs/NX823.h | 4 +- include/configs/PN62.h | 6 +- include/configs/TOP860.h | 8 +- include/configs/TQM5200.h | 2 +- include/configs/VoVPN-GW.h | 4 +- include/configs/afeb9260.h | 6 +- include/configs/apollon.h | 2 +- include/configs/at91cap9adk.h | 4 +- include/configs/at91sam9260ek.h | 6 +- include/configs/at91sam9261ek.h | 6 +- include/configs/at91sam9263ek.h | 6 +- include/configs/at91sam9rlek.h | 6 +- include/configs/atngw100.h | 2 +- include/configs/atstk1002.h | 2 +- include/configs/atstk1006.h | 2 +- include/configs/eNET.h | 6 +- include/configs/favr-32-ezkit.h | 2 +- include/configs/grsim.h | 26 ++-- include/configs/grsim_leon2.h | 22 ++-- include/configs/gth2.h | 14 +- include/configs/keymile-common.h | 2 +- include/configs/lwmon.h | 4 +- include/configs/lwmon5.h | 2 +- include/configs/mp2usb.h | 4 +- include/configs/mx1fs2.h | 6 +- include/configs/omap2420h4.h | 2 +- include/configs/omap3_beagle.h | 2 +- include/configs/omap3_evm.h | 2 +- include/configs/omap3_overo.h | 2 +- include/configs/omap3_pandora.h | 2 +- include/configs/omap3_zoom1.h | 2 +-
Quoted 8 lines
include/configs/sc3.h | 24 ++-- include/configs/scb9328.h | 4 +- include/configs/stxxtc.h | 2 +- include/configs/vct.h | 38 +++--- include/configs/wepep250.h | 6 +- 59 files changed, 458 insertions(+), 436 deletions(-) delete mode 100644 common/cmd_autoscript.c create mode 100644 common/cmd_source.c
Applied.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The most exciting phrase to hear in science, the one that heralds new
discoveries, is not "Eureka!" (I found it!) but "That's funny ..."
-- Isaac Asimov