some kernel issues
A message that is not in the archive (sent off-list or not yet received): [email protected]
[kernel 2.6.30-rc4-14-vanilla from openSuSE factory on top of openSuSE 11.1]
With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example, after X has started. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21.
Are there new boot parameters to add or is this a bug? It seems that `vga=0x31a' fails (which openSuSE's yast installer provides) since without it I can see boot messages.
BTW, for `vga=0x31a' I get
Console: colour dummy device 80x25
in the log file, while without this parameter I get
Console: colour VGA+ 80x25
Werner
Quoted 10 lines
[kernel 2.6.30-rc4-14-vanilla from openSuSE factory on top of openSuSE 11.1]
With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example, after X has started. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21.
I've filed a bug report.
http://bugzilla.kernel.org/show_bug.cgi?id=13249
Werner
Quoted 15 lines · Werner LEMBERG
[kernel 2.6.30-rc4-14-vanilla from openSuSE factory on top of openSuSE 11.1]
With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example, after X has started. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21.
Are there new boot parameters to add or is this a bug? It seems that `vga=0x31a' fails (which openSuSE's yast installer provides) since without it I can see boot messages.
Quoted 7 lines
BTW, for `vga=0x31a' I get
Console: colour dummy device 80x25
in the log file, while without this parameter I get
Console: colour VGA+ 80x25
Make sure you haven't enabled kernel mode setting.
CONFIG_DRM_I915_KMS
Dave.
Quoted 9 lines
Werner
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: Dave Airlie <[email protected]>
Subject: Re: some kernel issues
Date: Tue, 5 May 2009 20:44:18 +1000
Quoted 9 lines
Quoted 5 lines
With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example, after X has started. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21.
Make sure you haven't enabled kernel mode setting.
CONFIG_DRM_I915_KMS
Uuuuh, completely undocumented. Thanks! Will check soon.
Werner
Quoted 10 lines · Werner LEMBERG
From: Dave Airlie <[email protected]>
Subject: Re: some kernel issues
Date: Tue, 5 May 2009 20:44:18 +1000Quoted 6 lines
Quoted 5 lines
With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example, after X has started. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21.
Quoted 6 lines
Quoted 3 lines
Make sure you haven't enabled kernel mode setting.
CONFIG_DRM_I915_KMSUuuuh, completely undocumented. Thanks! Will check soon.
Huh?
Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old userspaces with this enabled will cause pain. Note that this causes the driver to bind to PCI devices, which precludes loading things like intelfb.
But as you don't have it, it doesn't seem like that is the issue
Dave.
Quoted 5 lines
Quoted 4 lines
Quoted 1 line
CONFIG_DRM_I915_KMSUuuuh, completely undocumented. Thanks! Will check soon.
Quoted 7 lines
Huh?
Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old userspaces with this enabled will cause pain. Note that this causes the driver to bind to PCI devices, which precludes loading things like intelfb.
Mea culpa, sorry. I did a grep for CONFIG_DRM_I915_KMS'. Now I know that I have to omit the CONFIG_' part.
Werner
Quoted 9 lines
Quoted 5 lines
With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example, after X has started. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21.
Make sure you haven't enabled kernel mode setting.
CONFIG_DRM_I915_KMS
It's not set. BTW, CONFIG_DRM_I915 is set to `m'.
Werner