Skip to contentSkip to conversation

mtdparts and JFFS2

U-Boot Renaud barbier 2 participants 2 messages May 4, 2009

lore
Share & tools
lore
#0 lore raw

I have used the new (to me) dynamic partitioning system with JFFS2.

I have defined one partiton as follows:
mtdids=nor0=boardnor
mtdparts=mtdparts=boardnor:4m(boot)

After using chpart (chpart nor0,0) successfully I was not able to list the file
embedded in my jffs2 image using the command ls.

I later noticed that jffs2_part_info is called with current_dev = NULL;

I then declared current_dev global in cmd_mtdparts.c and external in cmd_jffs2.c

the 'ls' command then worked:
U-boot> ls
Scanning JFFS2 FS: . done.
-rw-r--r-- 1148560 Thu Apr 30 14:13:52 2009 uImage

So:
Is that a bug?
Or did I configure U-boot incorrectly?

thanks.

#1 lore raw
Quoted 15 lines · Renaud barbier

I have used the new (to me) dynamic partitioning system with JFFS2.

I have defined one partiton as follows:
mtdids=nor0=boardnor
mtdparts=mtdparts=boardnor:4m(boot)

After using chpart (chpart nor0,0) successfully I was not able to list the file
embedded in my jffs2 image using the command ls.

I later noticed that jffs2_part_info is called with current_dev = NULL;

I then declared current_dev global in cmd_mtdparts.c and external in cmd_jffs2.c

Quoted 8 lines

the 'ls' command then worked:
U-boot> ls
Scanning JFFS2 FS: . done.
-rw-r--r-- 1148560 Thu Apr 30 14:13:52 2009 uImage

So:
Is that a bug?
Or did I configure U-boot incorrectly?

This is a bug introduced with the split of the JFFS2 and MTDPARTS commands. Thanks for spotting.

Best would be if you could provide a proper patch to fix this.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================