mtdparts and JFFS2
I have used the new (to me) dynamic partitioning system with JFFS2.
I have defined one partiton as follows:
mtdids=nor0=boardnor
mtdparts=mtdparts=boardnor:4m(boot)
After using chpart (chpart nor0,0) successfully I was not able to list the file
embedded in my jffs2 image using the command ls.
I later noticed that jffs2_part_info is called with current_dev = NULL;
I then declared current_dev global in cmd_mtdparts.c and external in cmd_jffs2.c
the 'ls' command then worked:
U-boot> ls
Scanning JFFS2 FS: . done.
-rw-r--r-- 1148560 Thu Apr 30 14:13:52 2009 uImage
So:
Is that a bug?
Or did I configure U-boot incorrectly?
thanks.
Quoted 15 lines · Renaud barbier
I have used the new (to me) dynamic partitioning system with JFFS2.
I have defined one partiton as follows:
mtdids=nor0=boardnor
mtdparts=mtdparts=boardnor:4m(boot)After using chpart (chpart nor0,0) successfully I was not able to list the file
embedded in my jffs2 image using the command ls.I later noticed that
jffs2_part_infois called withcurrent_dev= NULL;I then declared
current_devglobal incmd_mtdparts.cand external incmd_jffs2.c
Quoted 8 lines
the 'ls' command then worked:
U-boot> ls
Scanning JFFS2 FS: . done.
-rw-r--r-- 1148560 Thu Apr 30 14:13:52 2009 uImageSo:
Is that a bug?
Or did I configure U-boot incorrectly?
This is a bug introduced with the split of the JFFS2 and MTDPARTS commands. Thanks for spotting.
Best would be if you could provide a proper patch to fix this.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================