Hauppauge WinTV-CI
Hi,
Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ? Thank you.
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 1 line
Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ?
not
Goga
Quoted 5 lines · Goga777 wrote:
Quoted 1 line
Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ?
not
Quoted 8 lines
Goga
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I have been struggling for ages with this device, trying get the firmware to load.
The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader
Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb
I could use some help, like :
= traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser = recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) = suggestions on how to proceed ...
Luc
Quoted 5 lines · Goga777 wrote:
Quoted 1 line
Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ?
not
Quoted 8 lines
Goga
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I have been struggling for ages with this device, trying get the firmware to load.
The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader
Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb
I could use some help, like :
Quoted 3 lines
Quoted 3 lines
traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ...
Luc
Quoted 11 lines
I have been struggling for ages with this device, trying get the firmware to load.
The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader
Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb
I could use some help, like :
Quoted 3 lines
Quoted 3 lines
traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ...
Do you know why it doesn't support S2 channels ?
Hardware or software limitation ?
Regards
Quoted 13 lines · BRUNETON Béranger
Quoted 11 lines
I have been struggling for ages with this device, trying get the firmware to load.
The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader
Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb
I could use some help, like :
Quoted 3 lines
Quoted 3 lines
traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ...
Quoted 6 lines
Do you know why it doesn't support S2 channels ?
Hardware or software limitation ?Regards
I don't have much in the way of DVB-expertise, but here goes :
1) WinTV-CI doesn't participate in getting the signal, so changes in tuners/modulation standards/... etc shouldn't bother it
2) It is a USB2-device so should have the raw bandwidth to handle a HDTV stream
3) It uses the smartcard you'd use normally, so the actual decryption is done with the same hardware
so I'd venture it's a software limitation.
Luc
Quoted 8 lines · Goga777 wrote:
Quoted 1 line
Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ?
not
Goga
_______________________________________________
I have been struggling for ages with this device, trying get the firmware to load.
The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader
Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb
I could use some help, like :
Quoted 3 lines
traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ...
Luc