Skip to contentSkip to conversation

how to use a function provided by u-boot in linux driver

U-Boot Kartheek N S 3 participants 3 messages May 19, 2009

lore
Share & tools
lore
#0 lore raw

Hi All,
I would like to use miiphy_read and miiphy_write functions provided by
u-boot in the linux kernel driver.
This is required for reading the link status of each of the phys
associated with a switch.

I added miiphy_read and miiphy_write to the exports.h and tried to use
it in the kernel. But we get lots of multiple reference errors as some libraries will be there both in u-boot and linux kernel.

Could I do something like a dll or lib for these functions and use them
in the linux kernel driver ?
Please guide me on this.

Thanks,
Kartheek N S

Signature · 2 lines
View this message in context: http://www.nabble.com/how-to-use-a-function-provided-by-u-boot-in-linux-driver-tp23610373p23610373.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw

Hi Kartheek,

Quoted 2 lines

I would like to use miiphy_read and miiphy_write functions provided by
u-boot in the linux kernel driver.

Why would you want to do such a weird thing?

By the time Linux boots, U-Boot will be completely overwritten in memory. After all, Linux is perfectly able to care for itself ;)

Quoted 2 lines

This is required for reading the link status of each of the phys
associated with a switch.

So implement similar code in the Linux driver.

Quoted 7 lines

I added miiphy_read and miiphy_write to the exports.h and tried to use
it in the kernel. But we get lots of multiple reference errors as some libraries will be there both in u-boot and linux kernel.

Could I do something like a dll or lib for these functions and use them
in the linux kernel driver ?
Please guide me on this.

We do not do such a form of sharing. Actually we copy much code from Linux to U-Boot - the other way is rather seldom - and then we try to keep the code exatly the same as in Linux to allow for easy updates in the future.

Cheers
Detlev

Signature · 7 lines
Given that I had no time for a nervous breakdown, I chose to fix the
issue instead...
                              -- Philippe Gerum
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
#2 lore raw
In reply to Kartheek N S

Dear Kartheek N S,

Quoted 3 lines · In message <[email protected]> you wrote:

I would like to use miiphy_read and miiphy_write functions provided by
u-boot in the linux kernel driver.

This is not possible, and the request makes no sense.

When Linux boots, all the memory used by U-Boot is freed; no trace of U-Boot is left behind in memory. You cannot call any U-Boot functions from Linux, as U-Boot does not exist any more in RAM.

Quoted 2 lines

This is required for reading the link status of each of the phys
associated with a switch.

Linux has it's own interface and drivers to talk to PHYs and the like.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It's hard to make a program foolproof because fools are so ingenious.