how to use a function provided by u-boot in linux driver
Hi All,
I would like to use miiphy_read and miiphy_write functions provided by
u-boot in the linux kernel driver.
This is required for reading the link status of each of the phys
associated with a switch.
I added miiphy_read and miiphy_write to the exports.h and tried to use
it in the kernel. But we get lots of multiple reference errors as some libraries will be there both in u-boot and linux kernel.
Could I do something like a dll or lib for these functions and use them
in the linux kernel driver ?
Please guide me on this.
Thanks,
Kartheek N S
Signature · 2 lines
View this message in context: http://www.nabble.com/how-to-use-a-function-provided-by-u-boot-in-linux-driver-tp23610373p23610373.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Hi Kartheek,
Quoted 2 lines
I would like to use
miiphy_readandmiiphy_writefunctions provided by
u-boot in the linux kernel driver.
Why would you want to do such a weird thing?
By the time Linux boots, U-Boot will be completely overwritten in memory. After all, Linux is perfectly able to care for itself ;)
Quoted 2 lines
This is required for reading the link status of each of the phys
associated with a switch.
So implement similar code in the Linux driver.
Quoted 7 lines
I added
miiphy_readandmiiphy_writeto theexports.hand tried to use
it in the kernel. But we get lots of multiple reference errors as some libraries will be there both in u-boot and linux kernel.Could I do something like a dll or lib for these functions and use them
in the linux kernel driver ?
Please guide me on this.
We do not do such a form of sharing. Actually we copy much code from Linux to U-Boot - the other way is rather seldom - and then we try to keep the code exatly the same as in Linux to allow for easy updates in the future.
Cheers
Detlev
Signature · 7 lines
Given that I had no time for a nervous breakdown, I chose to fix the
issue instead...
-- Philippe Gerum
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.deDear Kartheek N S,
Quoted 3 lines · In message <[email protected]> you wrote:
I would like to use
miiphy_readandmiiphy_writefunctions provided by
u-boot in the linux kernel driver.
This is not possible, and the request makes no sense.
When Linux boots, all the memory used by U-Boot is freed; no trace of U-Boot is left behind in memory. You cannot call any U-Boot functions from Linux, as U-Boot does not exist any more in RAM.
Quoted 2 lines
This is required for reading the link status of each of the phys
associated with a switch.
Linux has it's own interface and drivers to talk to PHYs and the like.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It's hard to make a program foolproof because fools are so ingenious.