Skip to contentSkip to conversation

xfstests 206: test for overflow in growfs size calculation

PATCH New Eric Sandeen 3 participants 4 messages May 28, 2009 – May 29, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 xfstests 206: test for overflow in growfs size calculation

Test trim of last small AG for large filesystem resizes

As reported at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29187
this trimming may cause an overflow in the new size calculation.

Patch to fix it, and testcase at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29193

---

206 new file +82 -0
new file mode 100755
index 0000000..cb584f2
@@ -0,0 +1,82 @@
+#! /bin/sh
+# FS QA Test No. 206
+#
+# Test trim of last small AG for large filesystem resizes
+#
+# As reported at
+# http://article.gmane.org/gmane.comp.file-systems.xfs.general/29187
+# this trimming may cause an overflow in the new size calculation.
+# Patch and testcase at
+# http://article.gmane.org/gmane.comp.file-systems.xfs.general/29193
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2009 Eric Sandeen.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+# creator
[email protected]
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    umount $tmpdir
+    rmdir $tmpdir
+    rm -f $tmp
+    rm -f $tmpfile
+}
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs xfs
+_supported_os IRIX Linux
+
+tmpfile=$TEST_DIR/fsfile.$$
+tmpdir=$TEST_DIR/tmpdir.$$
+
+mkdir -p $tmpdir || _fail "!!! failed to create temp mount dir"
+
+echo "=== xfs_io ==="
+xfs_io -f -c "truncate 19998630180864" $tmpfile \
+	|| _fail "!!! failed to truncate loopback file to correct size"
+
+echo "=== mkfs.xfs ==="
+mkfs.xfs -f -bsize=4096 -dagsize=76288719b,size=3905982455b -llazy-count=0 $tmpfile \
+	| sed -e "s,^meta-data=.*isize,meta-data=FILE                   isize,g"
+
+mount -o loop $tmpfile $tmpdir || _fail "!!! failed to loopback mount"
+
+echo "=== xfs_growfs ==="
+xfs_growfs $tmpdir \
+	| sed -e "s,^meta-data=.*isize,meta-data=FILE                   isize,g" \
+	| grep -v "data blocks changed"
+
+# _cleanup cleans up
+
+# success, all done
+status=0
+exit
206.out new file +20 -0
new file mode 100644
index 0000000..14b2c34
@@ -0,0 +1,20 @@
+QA output created by 206
+=== xfs_io ===
+=== mkfs.xfs ===
+meta-data=FILE                   isize=256    agcount=52, agsize=76288719 blks
+         =                       sectsz=512   attr=2
+data     =                       bsize=4096   blocks=3905982455, imaxpct=5
+         =                       sunit=0      swidth=0 blks
+naming   =version 2              bsize=4096   ascii-ci=0
+log      =internal log           bsize=4096   blocks=32768, version=2
+         =                       sectsz=512   sunit=0 blks, lazy-count=0
+realtime =none                   extsz=4096   blocks=0, rtextents=0
+=== xfs_growfs ===
+meta-data=FILE                   isize=256    agcount=52, agsize=76288719 blks
+         =                       sectsz=512   attr=2
+data     =                       bsize=4096   blocks=3905982455, imaxpct=5
+         =                       sunit=0      swidth=0 blks
+naming   =version 2              bsize=4096   ascii-ci=0
+log      =internal               bsize=4096   blocks=32768, version=2
+         =                       sectsz=512   sunit=0 blks, lazy-count=0
+realtime =none                   extsz=4096   blocks=0, rtextents=0
group +1 -0
index 0ac33c2..343aace 100644
@@ -310,3 +310,4 @@ atime
 203 ioctl auto
 204 metadata rw auto
 205 metadata rw auto
+206 growfs auto quick

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#1 lore raw

PATCH v2 1/1 xfstests 206: test for overflow in growfs size calculation

Test trim of last small AG for large filesystem resizes

As reported at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29187
this trimming may cause an overflow in the new size calculation.

Patch to fix it, and testcase at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29193

V2: now with proper expected (resized) output!

---

206 new file +85 -0
new file mode 100755
index 0000000..dccf4c4
@@ -0,0 +1,85 @@
+#! /bin/sh
+# FS QA Test No. 206
+#
+# Test trim of last small AG for large filesystem resizes
+#
+# As reported at
+# http://article.gmane.org/gmane.comp.file-systems.xfs.general/29187
+# this trimming may cause an overflow in the new size calculation.
+# Patch and testcase at
+# http://article.gmane.org/gmane.comp.file-systems.xfs.general/29193
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2009 Eric Sandeen.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+# creator
[email protected]
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    umount $tmpdir
+    rmdir $tmpdir
+    rm -f $tmp
+    rm -f $tmpfile
+}
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs xfs
+_supported_os IRIX Linux
+
+tmpfile=$TEST_DIR/fsfile.$$
+tmpdir=$TEST_DIR/tmpdir.$$
+
+mkdir -p $tmpdir || _fail "!!! failed to create temp mount dir"
+
+echo "=== xfs_io ==="
+xfs_io -f -c "truncate 19998630180864" $tmpfile \
+	|| _fail "!!! failed to truncate loopback file to correct size"
+
+echo "=== mkfs.xfs ==="
+mkfs.xfs -f -bsize=4096 -dagsize=76288719b,size=3905982455b -llazy-count=0 $tmpfile \
+	| sed -e "s,^meta-data=.*isize,meta-data=FILE                   isize,g"
+
+mount -o loop $tmpfile $tmpdir || _fail "!!! failed to loopback mount"
+
+echo "=== xfs_growfs ==="
+xfs_growfs $tmpdir \
+	| sed -e "s,^meta-data=.*isize,meta-data=FILE                   isize,g"
+
+echo "=== xfs_info ==="
+xfs_info $tmpdir \
+	| sed -e "s,^meta-data=.*isize,meta-data=FILE                   isize,g"
+
+# _cleanup cleans up
+
+# success, all done
+status=0
+exit
206.out new file +30 -0
new file mode 100644
index 0000000..b17f728
@@ -0,0 +1,30 @@
+QA output created by 206
+=== xfs_io ===
+=== mkfs.xfs ===
+meta-data=FILE                   isize=256    agcount=52, agsize=76288719 blks
+         =                       sectsz=512   attr=2
+data     =                       bsize=4096   blocks=3905982455, imaxpct=5
+         =                       sunit=0      swidth=0 blks
+naming   =version 2              bsize=4096   ascii-ci=0
+log      =internal log           bsize=4096   blocks=32768, version=2
+         =                       sectsz=512   sunit=0 blks, lazy-count=0
+realtime =none                   extsz=4096   blocks=0, rtextents=0
+=== xfs_growfs ===
+meta-data=FILE                   isize=256    agcount=52, agsize=76288719 blks
+         =                       sectsz=512   attr=2
+data     =                       bsize=4096   blocks=3905982455, imaxpct=5
+         =                       sunit=0      swidth=0 blks
+naming   =version 2              bsize=4096   ascii-ci=0
+log      =internal               bsize=4096   blocks=32768, version=2
+         =                       sectsz=512   sunit=0 blks, lazy-count=0
+realtime =none                   extsz=4096   blocks=0, rtextents=0
+data blocks changed from 3905982455 to 4882478016
+=== xfs_info ===
+meta-data=FILE                   isize=256    agcount=64, agsize=76288719 blks
+         =                       sectsz=512   attr=2
+data     =                       bsize=4096   blocks=4882478016, imaxpct=5
+         =                       sunit=0      swidth=0 blks
+naming   =version 2              bsize=4096   ascii-ci=0
+log      =internal               bsize=4096   blocks=32768, version=2
+         =                       sectsz=512   sunit=0 blks, lazy-count=0
+realtime =none                   extsz=4096   blocks=0, rtextents=0
group +1 -0
index 0ac33c2..343aace 100644
@@ -310,3 +310,4 @@ atime
 203 ioctl auto
 204 metadata rw auto
 205 metadata rw auto
+206 auto growfs quick

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#2 lore raw
Quoted 10 lines · Eric Sandeen

Test trim of last small AG for large filesystem resizes

As reported at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29187
this trimming may cause an overflow in the new size calculation.

Patch to fix it, and testcase at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29193

V2: now with proper expected (resized) output!

This fails for me in really weird ways (Debian -testing, i386):

206.out.bad renamed from 206.out +8 -20
@@ -1,30 +1,18 @@
 QA output created by 206
 === xfs_io ===
+ftruncate: File too large
 === mkfs.xfs ===
+existing superblock read failed: Success
+mkfs.xfs: pwrite64 failed: Invalid argument
 meta-data=FILE                   isize=256    agcount=52, agsize=76288719 blks
          =                       sectsz=512   attr=2
 data     =                       bsize=4096   blocks=3905982455, imaxpct=5
          =                       sunit=0      swidth=0 blks
 naming   =version 2              bsize=4096   ascii-ci=0
-log      =internal log           bsize=4096   blocks=32768, version=2
-         =                       sectsz=512   sunit=0 blks, lazy-count=0
-realtime =none                   extsz=4096   blocks=0, rtextents=0
-=== xfs_growfs ===
-meta-data=FILE                   isize=256    agcount=52, agsize=76288719 blks
-         =                       sectsz=512   attr=2
-data     =                       bsize=4096   blocks=3905982455, imaxpct=5
-         =                       sunit=0      swidth=0 blks
-naming   =version 2              bsize=4096   ascii-ci=0
-log      =internal               bsize=4096   blocks=32768, version=2
-         =                       sectsz=512   sunit=0 blks, lazy-count=0
-realtime =none                   extsz=4096   blocks=0, rtextents=0
-data blocks changed from 3905982455 to 4882478016
-=== xfs_info ===
-meta-data=FILE                   isize=256    agcount=64, agsize=76288719 blks
-         =                       sectsz=512   attr=2
-data     =                       bsize=4096   blocks=4882478016, imaxpct=5
-         =                       sunit=0      swidth=0 blks
-naming   =version 2              bsize=4096   ascii-ci=0
-log      =internal               bsize=4096   blocks=32768, version=2
+log      =internal log           bsize=4096   blocks=521728, version=2
          =                       sectsz=512   sunit=0 blks, lazy-count=0
 realtime =none                   extsz=4096   blocks=0, rtextents=0
+mount: /dev/loop0: can't read superblock
+!!! failed to loopback mount
+(see 206.full for details)
+umount: /mnt/test/tmpdir.4994: not mounted

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#3 lore raw
Quoted 18 lines · Christoph Hellwig
Quoted 10 lines · Eric Sandeen

Test trim of last small AG for large filesystem resizes

As reported at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29187
this trimming may cause an overflow in the new size calculation.

Patch to fix it, and testcase at
http://article.gmane.org/gmane.comp.file-systems.xfs.general/29193

V2: now with proper expected (resized) output!

This fails for me in really weird ways (Debian -testing, i386):

206.out.bad line 3

Quoted 3 lines
206.out.bad renamed from 206.out +1 -0
@@ -1,30 +1,18 @@
 QA output created by 206
 === xfs_io ===
+ftruncate: File too large

hm, 32-bit. crud. Should probably just restrict the test to 64-bit systems, since we need a file > 16T.

What's weirder is that xfs_io shoulda caused an error and caused the test to bail, I think.

As for the rest of it, I need better error handling I guess :)

-Eric

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs