mac80211 sw scan: passive dwell time
Hi,
in mac80211's software scan implementation the passive dwell time IEEE80211_PASSIVE_CHANNEL_TIME is set to (HZ / 5) which means we stay 200ms on each passive channel. Compared to iwlwifi's hw scan and the old ipw* drivers which use values around 120ms this is quite long.
Reducing the passive dwell time from 200ms to 120ms could save us something around a second on cards capable of 11a and we would be still able to catch beacons from most access points (assuming a ~100ms beacon interval).
Objections?
Thanks,
Helmut
Quoted 1 line
Objections?
No :-)
Signature · 1 line
http://www.holgerschurig.de