Skip to contentSkip to conversation

mac80211 sw scan: passive dwell time

DISCUSSION Helmut Schaa 2 participants 2 messages Jun 30, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

in mac80211's software scan implementation the passive dwell time IEEE80211_PASSIVE_CHANNEL_TIME is set to (HZ / 5) which means we stay 200ms on each passive channel. Compared to iwlwifi's hw scan and the old ipw* drivers which use values around 120ms this is quite long.

Reducing the passive dwell time from 200ms to 120ms could save us something around a second on cards capable of 11a and we would be still able to catch beacons from most access points (assuming a ~100ms beacon interval).

Objections?

Thanks,
Helmut

#1 lore raw
Quoted 1 line

Objections?

No :-)

Signature · 1 line
http://www.holgerschurig.de