Add support for Broadcom BCM63xx SoCs
Subsystems (10)
cover Add support for Broadcom BCM63xx SoCs
This is a patch series which has been sitting in the linux-bcm63xx git repository for quite a while. I'm posting this series for it to receive the necessary review - in particular the drivers have so far been ignored virtually entirely.
Ralf
PATCH 1/12 MIPS: BCM63XX: Add Broadcom 63xx CPU definitions.
From: Maxime Bizon <[email protected]>
Todo: Nothing ever detects CPU_BCM6338 but the code tests for it anyway.
arch/mips/include/asm/cpu.h | 7 +++++++ arch/mips/kernel/cpu-probe.c | 24 ++++++++++++++++++++++++ arch/mips/mm/tlbex.c | 4 ++++ 3 files changed, 35 insertions(+)
arch/mips/include/asm/cpu.h +7 -0
@@ -113,6 +113,12 @@#define PRID_IMP_BCM4710 0x4000#define PRID_IMP_BCM3302 0x9000 +#define PRID_IMP_BCM6338 0x9000 +#define PRID_IMP_BCM6345 0x8000 +#define PRID_IMP_BCM6348 0x9100 +#define PRID_IMP_BCM4350 0xA000 +#define PRID_REV_BCM6358 0x0010 +#define PRID_REV_BCM6368 0x0030/* * These are the PRID's for when 23:16 == PRID_COMP_CAVIUM
@@ -210,6 +216,7 @@ enum cpu_type_enum {*/ CPU_4KC ,CPU_4KEC ,CPU_4KSC ,CPU_24K ,CPU_34K ,CPU_1004K ,CPU_74K ,CPU_ALCHEMY ,CPU_PR4450 ,CPU_BCM3302 ,CPU_BCM4710 , +CPU_BCM6338 ,CPU_BCM6345 ,CPU_BCM6348 ,CPU_BCM6358 ,/* * MIPS64 class processors
arch/mips/kernel/cpu-probe.c +24 -0
@@ -159,6 +159,10 @@ void __init check_wait(void)case CPU_25KF :case CPU_PR4450 :case CPU_BCM3302 : +case CPU_BCM6338 : +case CPU_BCM6345 : +case CPU_BCM6348 : +case CPU_BCM6358 :case CPU_CAVIUM_OCTEON : cpu_wait = r4k_wait;break ;
@@ -857,6 +861,7 @@ static inline void cpu_probe_broadcom(stdecode_configs (c);switch (c->processor_id &0xff00 ) {case PRID_IMP_BCM3302 : +/* same as PRID_IMP_BCM6338 */ c->cputype =CPU_BCM3302 ; __cpu_name[cpu] ="Broadcom BCM3302" ;break ;
@@ -864,6 +869,25 @@ static inline void cpu_probe_broadcom(st c->cputype =CPU_BCM4710 ; __cpu_name[cpu] ="Broadcom BCM4710" ;break ; +case PRID_IMP_BCM6345 : + c->cputype =CPU_BCM6345 ; + __cpu_name[cpu] ="Broadcom BCM6345" ; +break ; +case PRID_IMP_BCM6348 : + c->cputype =CPU_BCM6348 ; + __cpu_name[cpu] ="Broadcom BCM6348" ; +break ; +case PRID_IMP_BCM4350 : +switch (c->processor_id &0xf0 ) { +case PRID_REV_BCM6358 : + c->cputype =CPU_BCM6358 ; + __cpu_name[cpu] ="Broadcom BCM6358" ; +break ; +default : + c->cputype =CPU_UNKNOWN ; +break ; + } +break ; } }
arch/mips/mm/tlbex.c +4 -0
@@ -321,6 +321,10 @@ static void __cpuinit build_tlb_write_encase CPU_BCM3302 :case CPU_BCM4710 :case CPU_LOONGSON2 : +case CPU_BCM6338 : +case CPU_BCM6345 : +case CPU_BCM6348 : +case CPU_BCM6358 :case CPU_R5500 :if (m4kc_tlbp_war ())uasm_i_nop (p);
PATCH 2/12 MIPS: BCM63XX: Add support for the Broadcom BCM63xx family of SOCs.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/Kconfig | 18 arch/mips/Makefile | 7 arch/mips/bcm63xx/Kconfig | 9 arch/mips/bcm63xx/Makefile | 4 arch/mips/bcm63xx/clk.c | 220 +++ arch/mips/bcm63xx/cpu.c | 245 ++++ arch/mips/bcm63xx/cs.c | 144 ++ arch/mips/bcm63xx/early_printk.c | 30 arch/mips/bcm63xx/gpio.c | 128 ++ arch/mips/bcm63xx/irq.c | 253 ++++ arch/mips/bcm63xx/prom.c | 43 arch/mips/bcm63xx/setup.c | 111 + arch/mips/bcm63xx/timer.c | 205 +++ arch/mips/include/asm/fixmap.h | 4 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h | 11 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 314 +++++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h | 10 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 10 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 93 + arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 15 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 728 +++++++++++++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h | 11 arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h | 51 arch/mips/include/asm/mach-bcm63xx/gpio.h | 17 arch/mips/include/asm/mach-bcm63xx/war.h | 25 25 files changed, 2705 insertions(+), 1 deletion(-) create mode 100644 arch/mips/bcm63xx/Kconfig create mode 100644 arch/mips/bcm63xx/Makefile create mode 100644 arch/mips/bcm63xx/clk.c create mode 100644 arch/mips/bcm63xx/cpu.c create mode 100644 arch/mips/bcm63xx/cs.c create mode 100644 arch/mips/bcm63xx/early_printk.c create mode 100644 arch/mips/bcm63xx/gpio.c create mode 100644 arch/mips/bcm63xx/irq.c create mode 100644 arch/mips/bcm63xx/prom.c create mode 100644 arch/mips/bcm63xx/setup.c create mode 100644 arch/mips/bcm63xx/timer.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/gpio.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/war.h
arch/mips/Kconfig +17 -1
@@ -60,7 +60,7 @@ config BASLER_EXCITE Basler Vision Technologies AG. config BCM47XX - bool "BCM47XX based boards" + bool "Broadcom BCM47XX based boards" select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT
@@ -80,6 +80,21 @@ config BCM47XX help Support for BCM47XX based boards +config BCM63XX + bool "Broadcom BCM63XX based boards" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_HAS_EARLY_PRINTK + select SWAP_IO_SPACE + select ARCH_REQUIRE_GPIOLIB + help + Support for BCM63XX based boards + config MIPS_COBALT bool "Cobalt Server" select CEVT_R4K
@@ -659,6 +674,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" +source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig"
arch/mips/Makefile +7 -0
@@ -560,6 +560,13 @@ cflags-$(CONFIG_BCM47XX) += -I$(srctree) load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # +# Broadcom BCM63XX boards +# +core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/ +cflags-$(CONFIG_BCM63XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/ +load-$(CONFIG_BCM63XX) := 0xffffffff80010000 + +# # SNI RM # core-$(CONFIG_SNI_RM) += arch/mips/sni/
arch/mips/bcm63xx/Kconfig new file +9 -0
@@ -0,0 +1,9 @@ +menu "CPU support" + depends on BCM63XX + +config BCM63XX_CPU_6348 + bool "support 6348 CPU" + +config BCM63XX_CPU_6358 + bool "support 6358 CPU" +endmenu
arch/mips/bcm63xx/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/clk.c new file +220 -0
220 lines not on this page · raw message
arch/mips/bcm63xx/cpu.c new file +245 -0
245 lines not on this page · raw message
arch/mips/bcm63xx/cs.c new file +144 -0
144 lines not on this page · raw message
arch/mips/bcm63xx/early_printk.c new file +30 -0
@@ -0,0 +1,30 @@ +/* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +* +* Copyright (C) 2008 Maxime Bizon <[email protected]> +*/ + +#include <linux/init.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static void __init wait_xfered (void ) +{ +unsigned int val; + +/* wait for any previous char to be transmitted */ +do { + val =bcm_uart0_readl (UART_IR_REG ); +if (val &UART_IR_STAT (UART_IR_TXEMPTY )) +break ; + }while (1 ); +} + +void __init prom_putchar (char c) +{ +wait_xfered (); +bcm_uart0_writel (c,UART_FIFO_REG ); +wait_xfered (); +}
arch/mips/bcm63xx/gpio.c new file +128 -0
128 lines not on this page · raw message
arch/mips/bcm63xx/irq.c new file +253 -0
253 lines not on this page · raw message
arch/mips/bcm63xx/prom.c new file +43 -0
43 lines not on this page · raw message
arch/mips/bcm63xx/setup.c new file +111 -0
111 lines not on this page · raw message
arch/mips/bcm63xx/timer.c new file +205 -0
205 lines not on this page · raw message
arch/mips/include/asm/fixmap.h +4 -0
@@ -67,11 +67,15 @@ enum fixed_addresses {* the start of the fixmap, and leave one page empty * at the top of mem.. */ +#ifdef CONFIG_BCM63XX +#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000) +#else #if defined(CONFIG_CPU_TX39XX ) || defined(CONFIG_CPU_TX49XX )#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000))#else #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)#endif +#endif #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h new file +11 -0
@@ -0,0 +1,11 @@ +#ifndef BCM63XX_CLK_H_ +#define BCM63XX_CLK_H_ + +struct clk { +void (*set)(struct clk *,int ); +unsigned int rate; +unsigned int usage; +int id; +}; + +#endif /* ! BCM63XX_CLK_H_ */
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h new file +314 -0
314 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h new file +10 -0
@@ -0,0 +1,10 @@ +#ifndef BCM63XX_CS_H +#define BCM63XX_CS_H + +int bcm63xx_set_cs_base (unsigned int cs,u32 base,unsigned int size); +int bcm63xx_set_cs_timing (unsigned int cs,unsigned int wait, +unsigned int setup,unsigned int hold); +int bcm63xx_set_cs_param (unsigned int cs,u32 flags); +int bcm63xx_set_cs_status (unsigned int cs,int enable); + +#endif /* !BCM63XX_CS_H */
arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h new file +10 -0
@@ -0,0 +1,10 @@ +#ifndef BCM63XX_GPIO_H +#define BCM63XX_GPIO_H + +/* all helpers will BUG() if gpio count is >= 37. */ +#define BCM63XX_GPIO_COUNT 37 + +#define GPIO_DIR_OUT 0x0 +#define GPIO_DIR_IN 0x1 + +#endif /* !BCM63XX_GPIO_H */
arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h new file +93 -0
93 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h new file +15 -0
@@ -0,0 +1,15 @@ +#ifndef BCM63XX_IRQ_H_ +#define BCM63XX_IRQ_H_ + +#include <bcm63xx_cpu.h> + +#define IRQ_MIPS_BASE 0 +#define IRQ_INTERNAL_BASE 8 + +#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3) +#define IRQ_EXT_0 (IRQ_EXT_BASE + 0) +#define IRQ_EXT_1 (IRQ_EXT_BASE + 1) +#define IRQ_EXT_2 (IRQ_EXT_BASE + 2) +#define IRQ_EXT_3 (IRQ_EXT_BASE + 3) + +#endif /* ! BCM63XX_IRQ_H_ */
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h new file +728 -0
728 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h new file +11 -0
@@ -0,0 +1,11 @@ +#ifndef BCM63XX_TIMER_H_ +#define BCM63XX_TIMER_H_ + +int bcm63xx_timer_register (int id,void (*callback)(void *data),void *data); +void bcm63xx_timer_unregister (int id); +int bcm63xx_timer_set (int id,int monotonic,unsigned int countdown_us); +int bcm63xx_timer_enable (int id); +int bcm63xx_timer_disable (int id); +unsigned int bcm63xx_timer_countdown (unsigned int countdown_us); + +#endif /* !BCM63XX_TIMER_H_ */
arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h new file +51 -0
51 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/gpio.h new file +17 -0
@@ -0,0 +1,17 @@ +#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H +#define __ASM_MIPS_MACH_BCM63XX_GPIO_H + +#include <bcm63xx_gpio.h> + +#define NR_BUILTIN_GPIO BCM63XX_GPIO_COUNT + +#define gpio_to_irq (gpio) NULL + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value + +#define gpio_cansleep __gpio_cansleep + +#include <asm-generic/gpio.h> + +#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */
arch/mips/include/asm/mach-bcm63xx/war.h new file +25 -0
@@ -0,0 +1,25 @@ +/* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +* +* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <[email protected]> +*/ +#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H +#define __ASM_MIPS_MACH_BCM63XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */
PATCH 3/12 MIPS: BCM63XX: Add serial driver for bcm63xx integrated UART.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/bcm63xx/Makefile | 1 arch/mips/bcm63xx/dev-uart.c | 41 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h | 6 drivers/serial/Kconfig | 19 drivers/serial/Makefile | 1 drivers/serial/bcm63xx_uart.c | 890 ++++++++++++++++++ include/linux/serial_core.h | 2 7 files changed, 960 insertions(+) create mode 100644 arch/mips/bcm63xx/dev-uart.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h create mode 100644 drivers/serial/bcm63xx_uart.c
arch/mips/bcm63xx/Makefile +1 -0
@@ -1,4 +1,5 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o +obj-y += dev-uart.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/dev-uart.c new file +41 -0
41 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h new file +6 -0
@@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_UART_H_ +#define BCM63XX_DEV_UART_H_ + +int bcm63xx_uart_register (void ); + +#endif /* BCM63XX_DEV_UART_H_ */
drivers/serial/Kconfig +19 -0
@@ -1451,4 +1451,23 @@ config SERIAL_TIMBERDALE ---help--- Add support for UART controller on timberdale. +config SERIAL_BCM63XX + tristate "bcm63xx serial port support" + select SERIAL_CORE + depends on BCM63XX + help + If you have a bcm63xx CPU, you can enable its onboard + serial port by enabling this options. + + To compile this driver as a module, choose M here: the + module will be called bcm963xx_uart. + +config SERIAL_BCM63XX_CONSOLE + bool "Console on bcm63xx serial port" + depends on SERIAL_BCM63XX + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the bcm63xx CPU + you can make it the console by answering Y to this option. + endmenu
drivers/serial/Makefile +1 -0
@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711 obj-$(CONFIG_SERIAL_PXA) += pxa.o obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o +obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
drivers/serial/bcm63xx_uart.c new file +890 -0
890 lines not on this page · raw message
include/linux/serial_core.h +2 -0
@@ -174,6 +174,8 @@/* Qualcomm MSM SoCs */ #define PORT_MSM 88 +#define PORT_BCM63XX 87 +#ifdef __KERNEL__#include <linux/compiler.h>
PATCH 4/12 MIPS: BCM63XX: Add PCI support.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/bcm63xx/Kconfig | 2 arch/mips/bcm63xx/setup.c | 2 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h | 6 arch/mips/pci/Makefile | 2 arch/mips/pci/fixup-bcm63xx.c | 21 ++ arch/mips/pci/ops-bcm63xx.c | 179 ++++++++++++++++++ arch/mips/pci/pci-bcm63xx.c | 180 +++++++++++++++++++ arch/mips/pci/pci-bcm63xx.h | 27 ++ 8 files changed, 419 insertions(+) create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h create mode 100644 arch/mips/pci/fixup-bcm63xx.c create mode 100644 arch/mips/pci/ops-bcm63xx.c create mode 100644 arch/mips/pci/pci-bcm63xx.c create mode 100644 arch/mips/pci/pci-bcm63xx.h
arch/mips/bcm63xx/Kconfig +2 -0
@@ -3,7 +3,9 @@ menu "CPU support" config BCM63XX_CPU_6348 bool "support 6348 CPU" + select HW_HAS_PCI config BCM63XX_CPU_6358 bool "support 6358 CPU" + select HW_HAS_PCI endmenu
arch/mips/bcm63xx/setup.c +2 -0
@@ -108,4 +108,6 @@ void __init plat_mem_setup(void) pm_power_off = bcm63xx_machine_halt;set_io_port_base (0 ); + ioport_resource.start =0 ; + ioport_resource.end = ~0 ; }
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h new file +6 -0
@@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_PCI_H_ +#define BCM63XX_DEV_PCI_H_ + +extern int bcm63xx_pci_enabled; + +#endif /* BCM63XX_DEV_PCI_H_ */
arch/mips/pci/Makefile +2 -0
@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o +obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o # # These are still pretty much in the old state, watch, go blind.
arch/mips/pci/fixup-bcm63xx.c new file +21 -0
@@ -0,0 +1,21 @@ +/* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +* +* Copyright (C) 2008 Maxime Bizon <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/pci.h> +#include <bcm63xx_cpu.h> + +int pcibios_map_irq (const struct pci_dev *dev,u8 slot,u8 pin) +{ +return bcm63xx_get_irq_number (IRQ_PCI ); +} + +int pcibios_plat_dev_init (struct pci_dev *dev) +{ +return 0 ; +}
arch/mips/pci/ops-bcm63xx.c new file +179 -0
179 lines not on this page · raw message
arch/mips/pci/pci-bcm63xx.c new file +180 -0
180 lines not on this page · raw message
arch/mips/pci/pci-bcm63xx.h new file +27 -0
@@ -0,0 +1,27 @@ +#ifndef PCI_BCM63XX_H_ +#define PCI_BCM63XX_H_ + +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_dev_pci.h> + +/* +* Cardbus shares the PCI bus, but has no IDSEL, so a special id is +* reserved for it. If you have a standard PCI device at this id, you +* need to change the following definition. +*/ +#define CARDBUS_PCI_IDSEL 0x8 + +/* +* defined in ops-bcm63xx.c +*/ +extern struct pci_ops bcm63xx_pci_ops; +extern struct pci_ops bcm63xx_cb_ops; + +/* +* defined in pci-bcm63xx.c +*/ +extern void __iomem *pci_iospace_start; + +#endif /* ! PCI_BCM63XX_H_ */
PATCH 5/12 MIPS: BCM63XX: Change PCI code to emulate a fake cardbus bridge.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/pci/ops-bcm63xx.c | 288 ++++++++++++++++++++++++++++++++++++++++++++ arch/mips/pci/pci-bcm63xx.c | 44 ++++++ 2 files changed, 332 insertions(+)
arch/mips/pci/ops-bcm63xx.c +288 -0
@@ -177,3 +177,291 @@ struct pci_ops bcm63xx_pci_ops = { .read = bcm63xx_pci_read, .write = bcm63xx_pci_write }; + +#ifdef CONFIG_CARDBUS +/* +* emulate configuration read access on a cardbus bridge +*/ +#define FAKE_CB_BRIDGE_SLOT 0x1e + +static int fake_cb_bridge_bus_number =-1 ; + +static struct { +u16 pci_command; +u8 cb_latency; +u8 subordinate_busn; +u8 cardbus_busn; +u8 pci_busn; +int bus_assigned; +u16 bridge_control; + +u32 mem_base0; +u32 mem_limit0; +u32 mem_base1; +u32 mem_limit1; + +u32 io_base0; +u32 io_limit0; +u32 io_base1; +u32 io_limit1; +} fake_cb_bridge_regs; + +static int fake_cb_bridge_read (int where,int size,u32 *val) +{ +unsigned int reg; +u32 data; + + data =0 ; + reg = where >>2 ; +switch (reg) { +case (PCI_VENDOR_ID >>2 ): +case (PCI_CB_SUBSYSTEM_VENDOR_ID >>2 ): +/* create dummy vendor/device id from our cpu id */ + data = (bcm63xx_get_cpu_id () <<16 ) |PCI_VENDOR_ID_BROADCOM ; +break ; + +case (PCI_COMMAND >>2 ): + data = (PCI_STATUS_DEVSEL_SLOW <<16 ); + data |= fake_cb_bridge_regs.pci_command; +break ; + +case (PCI_CLASS_REVISION >>2 ): + data = (PCI_CLASS_BRIDGE_CARDBUS <<16 ); +break ; + +case (PCI_CACHE_LINE_SIZE >>2 ): + data = (PCI_HEADER_TYPE_CARDBUS <<16 ); +break ; + +case (PCI_INTERRUPT_LINE >>2 ): +/* bridge control */ + data = (fake_cb_bridge_regs.bridge_control <<16 ); +/* pin:intA line:0xff */ + data |= (0x1 <<8 ) |0xff ; +break ; + +case (PCI_CB_PRIMARY_BUS >>2 ): + data = (fake_cb_bridge_regs.cb_latency <<24 ); + data |= (fake_cb_bridge_regs.subordinate_busn <<16 ); + data |= (fake_cb_bridge_regs.cardbus_busn <<8 ); + data |= fake_cb_bridge_regs.pci_busn; +break ; + +case (PCI_CB_MEMORY_BASE_0 >>2 ): + data = fake_cb_bridge_regs.mem_base0; +break ; + +case (PCI_CB_MEMORY_LIMIT_0 >>2 ): + data = fake_cb_bridge_regs.mem_limit0; +break ; + +case (PCI_CB_MEMORY_BASE_1 >>2 ): + data = fake_cb_bridge_regs.mem_base1; +break ; + +case (PCI_CB_MEMORY_LIMIT_1 >>2 ): + data = fake_cb_bridge_regs.mem_limit1; +break ; + +case (PCI_CB_IO_BASE_0 >>2 ): +/* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base0 |0x1 ; +break ; + +case (PCI_CB_IO_LIMIT_0 >>2 ): + data = fake_cb_bridge_regs.io_limit0; +break ; + +case (PCI_CB_IO_BASE_1 >>2 ): +/* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base1 |0x1 ; +break ; + +case (PCI_CB_IO_LIMIT_1 >>2 ): + data = fake_cb_bridge_regs.io_limit1; +break ; + } + + *val =postprocess_read (data, where, size); +return PCIBIOS_SUCCESSFUL ; +} + +/* +* emulate configuration write access on a cardbus bridge +*/ +static int fake_cb_bridge_write (int where,int size,u32 val) +{ +unsigned int reg; +u32 data, tmp; +int ret; + + ret =fake_cb_bridge_read ((where & ~0x3 ),4 , &data); +if (ret !=PCIBIOS_SUCCESSFUL ) +return ret; + + data =preprocess_write (data, val, where, size); + + reg = where >>2 ; +switch (reg) { +case (PCI_COMMAND >>2 ): + fake_cb_bridge_regs.pci_command = (data &0xffff ); +break ; + +case (PCI_CB_PRIMARY_BUS >>2 ): + fake_cb_bridge_regs.cb_latency = (data >>24 ) &0xff ; + fake_cb_bridge_regs.subordinate_busn = (data >>16 ) &0xff ; + fake_cb_bridge_regs.cardbus_busn = (data >>8 ) &0xff ; + fake_cb_bridge_regs.pci_busn = data &0xff ; +if (fake_cb_bridge_regs.cardbus_busn) + fake_cb_bridge_regs.bus_assigned =1 ; +break ; + +case (PCI_INTERRUPT_LINE >>2 ): + tmp = (data >>16 ) &0xffff ; +/* disable memory prefetch support */ + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 ; + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 ; + fake_cb_bridge_regs.bridge_control = tmp; +break ; + +case (PCI_CB_MEMORY_BASE_0 >>2 ): + fake_cb_bridge_regs.mem_base0 = data; +break ; + +case (PCI_CB_MEMORY_LIMIT_0 >>2 ): + fake_cb_bridge_regs.mem_limit0 = data; +break ; + +case (PCI_CB_MEMORY_BASE_1 >>2 ): + fake_cb_bridge_regs.mem_base1 = data; +break ; + +case (PCI_CB_MEMORY_LIMIT_1 >>2 ): + fake_cb_bridge_regs.mem_limit1 = data; +break ; + +case (PCI_CB_IO_BASE_0 >>2 ): + fake_cb_bridge_regs.io_base0 = data; +break ; + +case (PCI_CB_IO_LIMIT_0 >>2 ): + fake_cb_bridge_regs.io_limit0 = data; +break ; + +case (PCI_CB_IO_BASE_1 >>2 ): + fake_cb_bridge_regs.io_base1 = data; +break ; + +case (PCI_CB_IO_LIMIT_1 >>2 ): + fake_cb_bridge_regs.io_limit1 = data; +break ; + } + +return PCIBIOS_SUCCESSFUL ; +} + +static int bcm63xx_cb_read (struct pci_bus *bus,unsigned int devfn, +int where,int size,u32 *val) +{ +/* snoop access to slot 0x1e on root bus, we fake a cardbus +* bridge at this location */ +if (!bus->parent &&PCI_SLOT (devfn) ==FAKE_CB_BRIDGE_SLOT ) { + fake_cb_bridge_bus_number = bus->number; +return fake_cb_bridge_read (where, size, val); + } + +/* a configuration cycle for the device behind the cardbus +* bridge is actually done as a type 0 cycle on the primary +* bus. This means that only one device can be on the cardbus +* bus */ +if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && +PCI_SLOT (devfn) ==0 ) +return bcm63xx_do_cfg_read (0 ,0 , +PCI_DEVFN (CARDBUS_PCI_IDSEL ,0 ), + where, size, val); + +return PCIBIOS_DEVICE_NOT_FOUND ; +} + +static int bcm63xx_cb_write (struct pci_bus *bus,unsigned int devfn, +int where,int size,u32 val) +{ +if (!bus->parent &&PCI_SLOT (devfn) ==FAKE_CB_BRIDGE_SLOT ) { + fake_cb_bridge_bus_number = bus->number; +return fake_cb_bridge_write (where, size, val); + } + +if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && +PCI_SLOT (devfn) ==0 ) +return bcm63xx_do_cfg_write (0 ,0 , +PCI_DEVFN (CARDBUS_PCI_IDSEL ,0 ), + where, size, val); + +return PCIBIOS_DEVICE_NOT_FOUND ; +} + +struct pci_ops bcm63xx_cb_ops = { + .read = bcm63xx_cb_read, + .write = bcm63xx_cb_write, +}; + +/* +* only one IO window, so it cannot be shared by PCI and cardbus, use +* fixup to choose and detect unhandled configuration +*/ +static void bcm63xx_fixup (struct pci_dev *dev) +{ +static int io_window =-1 ; +int i, found, new_io_window; +u32 val; + +/* look for any io resource */ + found =0 ; +for (i =0 ; i <DEVICE_COUNT_RESOURCE ; i++) { +if (pci_resource_flags (dev, i) &IORESOURCE_IO ) { + found =1 ; +break ; + } + } + +if (!found) +return ; + +/* skip our fake bus with only cardbus bridge on it */ +if (dev->bus->number == fake_cb_bridge_bus_number) +return ; + +/* find on which bus the device is */ +if (fake_cb_bridge_regs.bus_assigned && + dev->bus->number == fake_cb_bridge_regs.cardbus_busn && +PCI_SLOT (dev->devfn) ==0 ) + new_io_window =1 ; +else + new_io_window =0 ; + +if (new_io_window == io_window) +return ; + +if (io_window !=-1 ) { +printk (KERN_ERR "bcm63xx: both PCI and cardbus devices " +"need IO, which hardware cannot do\n" ); +return ; + } + +printk (KERN_INFO "bcm63xx: PCI IO window assigned to %s\n" , + (new_io_window ==0 ) ?"PCI" :"cardbus" ); + + val =bcm_mpi_readl (MPI_L2PIOREMAP_REG ); +if (io_window) + val |=MPI_L2PREMAP_IS_CARDBUS_MASK ; +else + val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK ; +bcm_mpi_writel (val,MPI_L2PIOREMAP_REG ); + + io_window = new_io_window; +} + +DECLARE_PCI_FIXUP_ENABLE (PCI_ANY_ID ,PCI_ANY_ID , bcm63xx_fixup); +#endif
arch/mips/pci/pci-bcm63xx.c +44 -0
71 lines not on this page · raw message
PATCH 6/12 MIPS: BCM63XX: Add PCMCIA & Cardbus support.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/bcm63xx/Makefile | 1 arch/mips/bcm63xx/dev-pcmcia.c | 135 ++++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 13 drivers/pcmcia/Kconfig | 4 drivers/pcmcia/Makefile | 1 drivers/pcmcia/bcm63xx_pcmcia.c | 521 ++++++++++++++++ drivers/pcmcia/bcm63xx_pcmcia.h | 65 + 7 files changed, 740 insertions(+) create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h
arch/mips/bcm63xx/Makefile +1 -0
@@ -1,5 +1,6 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o obj-y += dev-uart.o +obj-y += dev-pcmcia.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/dev-pcmcia.c new file +135 -0
135 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h new file +13 -0
@@ -0,0 +1,13 @@ +#ifndef BCM63XX_DEV_PCMCIA_H_ +#define BCM63XX_DEV_PCMCIA_H_ + +/* +* PCMCIA driver platform data +*/ +struct bcm63xx_pcmcia_platform_data { +unsigned int ready_gpio; +}; + +int bcm63xx_pcmcia_register (void ); + +#endif /* BCM63XX_DEV_PCMCIA_H_ */
drivers/pcmcia/Kconfig +4 -0
@@ -192,6 +192,10 @@ config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA +config PCMCIA_BCM63XX + tristate "bcm63xx pcmcia support" + depends on BCM63XX && PCMCIA + config PCMCIA_SA1100 tristate "SA1100 support" depends on ARM && ARCH_SA1100 && PCMCIA
drivers/pcmcia/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_ obj-$(CONFIG_M32R_PCC) += m32r_pcc.o obj-$(CONFIG_M32R_CFC) += m32r_cfc.o obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o +obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o obj-$(CONFIG_OMAP_CF) += omap_cf.o
drivers/pcmcia/bcm63xx_pcmcia.c new file +521 -0
521 lines not on this page · raw message
drivers/pcmcia/bcm63xx_pcmcia.h new file +65 -0
65 lines not on this page · raw message
PATCH 7/12 MIPS: BCM63XX: Add USB OHCI support.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/bcm63xx/Kconfig | 6 arch/mips/bcm63xx/Makefile | 1 arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 drivers/usb/host/ohci-bcm63xx.c | 164 ++++++++++++++ drivers/usb/host/ohci-hcd.c | 5 drivers/usb/host/ohci.h | 7 7 files changed, 238 insertions(+), 1 deletion(-) create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h create mode 100644 drivers/usb/host/ohci-bcm63xx.c
arch/mips/bcm63xx/Kconfig +6 -0
@@ -4,8 +4,14 @@ menu "CPU support" config BCM63XX_CPU_6348 bool "support 6348 CPU" select HW_HAS_PCI + select USB_ARCH_HAS_OHCI + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO config BCM63XX_CPU_6358 bool "support 6358 CPU" select HW_HAS_PCI + select USB_ARCH_HAS_OHCI + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO endmenu
arch/mips/bcm63xx/Makefile +1 -0
@@ -1,6 +1,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o obj-y += dev-uart.o obj-y += dev-pcmcia.o +obj-y += dev-usb-ohci.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/dev-usb-ohci.c new file +50 -0
50 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h new file +6 -0
@@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_USB_OHCI_H_ +#define BCM63XX_DEV_USB_OHCI_H_ + +int bcm63xx_ohci_register (void ); + +#endif /* BCM63XX_DEV_USB_OHCI_H_ */
drivers/usb/host/ohci-bcm63xx.c new file +164 -0
164 lines not on this page · raw message
drivers/usb/host/ohci-hcd.c +5 -0
@@ -1047,6 +1047,11 @@ MODULE_LICENSE ("GPL");#define PLATFORM_DRIVER usb_hcd_pnx4008_driver#endif +#ifdef CONFIG_BCM63XX +#include "ohci-bcm63xx.c" +#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver +#endif + #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7763) || \
drivers/usb/host/ohci.h +6 -1
@@ -536,6 +536,11 @@ static inline struct usb_hcd *ohci_to_hc#define big_endian_mmio (ohci) 0/* only little endian */ #endif +#if defined(CONFIG_MIPS ) && defined(CONFIG_BCM63XX ) +#define readl_be (addr) __raw_readl((__force unsigned *)addr) +#define writel_be (val, addr) __raw_writel(val, (__force unsigned *)addr) +#endif +/* * Big-endian read/write functions are arch-specific. * Other arches can be added if/when they're needed.
@@ -646,7 +651,7 @@ static inline u32 hc32_to_cpup (const st* some big-endian SOC implementations. Same thing happens with PSW access. */ -#ifdef CONFIG_PPC_MPC52xx +#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX )#define big_endian_frame_no_quirk (ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)#else #define big_endian_frame_no_quirk (ohci) 0
PATCH 8/12 MIPS: BCM63XX: Add USB EHCI support.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/bcm63xx/Kconfig | 2 arch/mips/bcm63xx/Makefile | 1 arch/mips/bcm63xx/dev-usb-ehci.c | 50 ++++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 drivers/usb/host/ehci-bcm63xx.c | 155 ++++++++++++++ drivers/usb/host/ehci-hcd.c | 5 drivers/usb/host/ehci.h | 5 7 files changed, 224 insertions(+) create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h create mode 100644 drivers/usb/host/ehci-bcm63xx.c
arch/mips/bcm63xx/Kconfig +2 -0
@@ -14,4 +14,6 @@ config BCM63XX_CPU_6358 select USB_ARCH_HAS_OHCI select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO + select USB_ARCH_HAS_EHCI + select USB_EHCI_BIG_ENDIAN_MMIO endmenu
arch/mips/bcm63xx/Makefile +1 -0
@@ -2,6 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o obj-y += dev-uart.o obj-y += dev-pcmcia.o obj-y += dev-usb-ohci.o +obj-y += dev-usb-ehci.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/dev-usb-ehci.c new file +50 -0
50 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h new file +6 -0
@@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_USB_EHCI_H_ +#define BCM63XX_DEV_USB_EHCI_H_ + +int bcm63xx_ehci_register (void ); + +#endif /* BCM63XX_DEV_USB_EHCI_H_ */
drivers/usb/host/ehci-bcm63xx.c new file +155 -0
155 lines not on this page · raw message
drivers/usb/host/ehci-hcd.c +5 -0
@@ -1117,6 +1117,11 @@ MODULE_LICENSE ("GPL");#define PLATFORM_DRIVER ixp4xx_ehci_driver#endif +#ifdef CONFIG_BCM63XX +#include "ehci-bcm63xx.c" +#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver +#endif +#if !defined(PCI_DRIVER ) && !defined(PLATFORM_DRIVER ) && \ !defined(PS3_SYSTEM_BUS_DRIVER ) && !defined(OF_PLATFORM_DRIVER )#error "missing bus glue for ehci-hcd"
drivers/usb/host/ehci.h +5 -0
@@ -598,6 +598,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u#define writel_be (val, addr) __raw_writel(val, (__force unsigned *)addr)#endif +#if defined(CONFIG_MIPS ) && defined(CONFIG_BCM63XX ) +#define readl_be (addr) __raw_readl((__force unsigned *)addr) +#define writel_be (val, addr) __raw_writel(val, (__force unsigned *)addr) +#endif +static inline unsigned int ehci_readl (const struct ehci_hcd *ehci,__u32 __iomem * regs) {
PATCH 9/12 MIPS: BCM63XX: Add integrated ethernet mac support.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/bcm63xx/Makefile | 1 arch/mips/bcm63xx/dev-enet.c | 156 + arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 45 drivers/net/Kconfig | 9 drivers/net/Makefile | 1 drivers/net/bcm63xx_enet.c | 1970 ++++++++++++++++++ drivers/net/bcm63xx_enet.h | 303 ++ 7 files changed, 2485 insertions(+) create mode 100644 arch/mips/bcm63xx/dev-enet.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h create mode 100644 drivers/net/bcm63xx_enet.c create mode 100644 drivers/net/bcm63xx_enet.h
arch/mips/bcm63xx/Makefile +1 -0
@@ -3,6 +3,7 @@ obj-y += dev-uart.o obj-y += dev-pcmcia.o obj-y += dev-usb-ohci.o obj-y += dev-usb-ehci.o +obj-y += dev-enet.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/dev-enet.c new file +156 -0
156 lines not on this page · raw message
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h new file +45 -0
45 lines not on this page · raw message
drivers/net/Kconfig +9 -0
@@ -1919,6 +1919,15 @@ config ATL2 To compile this driver as a module, choose M here. The module will be called atl2. +config BCM63XX_ENET + tristate "Broadcom 63xx internal mac support" + depends on BCM63XX + select MII + select PHYLIB + help + This driver supports the ethernet MACs in the Broadcom 63xx + MIPS chipset family (BCM63XX). + source "drivers/net/fs_enet/Kconfig" endif # NET_ETHERNET
drivers/net/Makefile +1 -0
@@ -136,6 +136,7 @@ obj-$(CONFIG_B44) += b44.o obj-$(CONFIG_FORCEDETH) += forcedeth.o obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_AX88796) += ax88796.o +obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
drivers/net/bcm63xx_enet.c new file +1970 -0
1,970 lines not on this page · raw message
drivers/net/bcm63xx_enet.h new file +303 -0
303 lines not on this page · raw message
PATCH 10/12 MIPS: BCM63XX: Add integrated ethernet PHY support for phylib.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
drivers/net/phy/Kconfig | 6 ++ drivers/net/phy/Makefile | 1 drivers/net/phy/bcm63xx.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 drivers/net/phy/bcm63xx.c
drivers/net/phy/Kconfig +6 -0
@@ -56,6 +56,12 @@ config BROADCOM_PHY Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 and BCM5482 PHYs. +config BCM63XX_PHY + tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX + ---help--- + Currently supports the 6348 and 6358 PHYs. + config ICPLUS_PHY tristate "Drivers for ICPlus PHYs" ---help---
drivers/net/phy/Makefile +1 -0
@@ -11,6 +11,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o +obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
drivers/net/phy/bcm63xx.c new file +132 -0
132 lines not on this page · raw message
PATCH 11/12 MIPS: BCM63XX: Add board support code.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
BCM6348-based:
- 96348R
- 96348gw
- 96348GW-10
- 96348GW-11
- 96348GW-A
- Sagem F@2404
- Davolink DV201AMR
BCM6358-based:
- 96358vw
- 96358vw2
- Pirelli/Alice AGPFS0
arch/mips/bcm63xx/Kconfig | 2 arch/mips/bcm63xx/Makefile | 2 arch/mips/bcm63xx/boards/Kconfig | 11 arch/mips/bcm63xx/boards/Makefile | 3 arch/mips/bcm63xx/boards/board_bcm963xx.c | 532 ++++++++++++++++++++ arch/mips/bcm63xx/prom.c | 4 arch/mips/bcm63xx/setup.c | 16 arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h | 12 arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 50 + 9 files changed, 630 insertions(+), 2 deletions(-) create mode 100644 arch/mips/bcm63xx/boards/Kconfig create mode 100644 arch/mips/bcm63xx/boards/Makefile create mode 100644 arch/mips/bcm63xx/boards/board_bcm963xx.c create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h create mode 100644 arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
arch/mips/bcm63xx/Kconfig +2 -0
@@ -17,3 +17,5 @@ config BCM63XX_CPU_6358 select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_MMIO endmenu + +source "arch/mips/bcm63xx/boards/Kconfig"
arch/mips/bcm63xx/Makefile +2 -0
@@ -6,4 +6,6 @@ obj-y += dev-usb-ehci.o obj-y += dev-enet.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-y += boards/ + EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/boards/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +choice + prompt "Board support" + depends on BCM63XX + default BOARD_BCM963XX + +config BOARD_BCM963XX + bool "Generic Broadcom 963xx boards" + select SSB + help + +endchoice
arch/mips/bcm63xx/boards/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o + +EXTRA_CFLAGS += -Werror
arch/mips/bcm63xx/boards/board_bcm963xx.c new file +532 -0
532 lines not on this page · raw message
arch/mips/bcm63xx/prom.c +4 -0
@@ -9,6 +9,7 @@#include <linux/init.h> #include <linux/bootmem.h> #include <asm/bootinfo.h> +#include <bcm63xx_board.h> #include <bcm63xx_cpu.h> #include <bcm63xx_io.h> #include <bcm63xx_regs.h>
@@ -36,6 +37,9 @@ void __init prom_init(void)/* assign command line from kernel config */ strcpy (arcs_cmdline,CONFIG_CMDLINE ); + +/* do low level board init */ +board_prom_init (); }void __init prom_free_prom_memory (void )
arch/mips/bcm63xx/setup.c +14 -2
@@ -16,6 +16,7 @@#include <asm/time.h> #include <asm/reboot.h> #include <asm/cacheflush.h> +#include <bcm63xx_board.h> #include <bcm63xx_cpu.h> #include <bcm63xx_regs.h> #include <bcm63xx_io.h>
@@ -90,8 +91,9 @@ static void __bcm63xx_machine_reboot(chaconst char *get_system_type (void ) {static char buf[128 ]; -sprintf (buf,"bcm963xx (0x%04x/0x%04X)" , -bcm63xx_get_cpu_id (),bcm63xx_get_cpu_rev ()); +snprintf (buf,sizeof (buf),"bcm63xx/%s (0x%04x/0x%04X)" , +board_get_name (), +bcm63xx_get_cpu_id (),bcm63xx_get_cpu_rev ());return buf; }
@@ -99,6 +101,7 @@ void __init plat_time_init(void) { mips_hpt_frequency =bcm63xx_get_cpu_freq () /2 ; } +void __init plat_mem_setup (void ) {add_memory_region (0 ,bcm63xx_get_memory_size (),BOOT_MEM_RAM );
@@ -110,4 +113,13 @@ void __init plat_mem_setup(void)set_io_port_base (0 ); ioport_resource.start =0 ; ioport_resource.end = ~0 ; + +board_setup (); +} + +int __init bcm63xx_register_devices (void ) +{ +return board_register_devices (); } + +arch_initcall (bcm63xx_register_devices);
arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h new file +12 -0
@@ -0,0 +1,12 @@ +#ifndef BCM63XX_BOARD_H_ +#define BCM63XX_BOARD_H_ + +const char *board_get_name (void ); + +void board_prom_init (void ); + +void board_setup (void ); + +int board_register_devices (void ); + +#endif /* ! BCM63XX_BOARD_H_ */
arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h new file +50 -0
50 lines not on this page · raw message
PATCH 12/12 MIPS: BCM63XX: Add defconfig.
In reply to Ralf BaechleFrom: Maxime Bizon <[email protected]>
arch/mips/configs/bcm63xx_defconfig | 972 ++++++++++++++++++++++++++++++++++++ 1 file changed, 972 insertions(+) create mode 100644 arch/mips/configs/bcm63xx_defconfig
arch/mips/configs/bcm63xx_defconfig new file +972 -0
@@ -0,0 +1,972 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Sun May 31 20:17:18 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +CONFIG_BCM63XX=y +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set + +# +# CPU support +# +CONFIG_BCM63XX_CPU_6348=y +CONFIG_BCM63XX_CPU_6358=y +CONFIG_BOARD_BCM963XX=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_SHMEM is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_MMU=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCMCIA_BCM63XX=y +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_BCM63XX_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_BCM63XX_ENET=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +# CONFIG_SSB_DRIVER_PCICORE is not set +# CONFIG_SSB_DRIVER_MIPS is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_SSB is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="console=ttyS0,115200" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y