Skip to contentSkip to conversation

2.6.31-rc0: sdb1 only starts to exist when sdb is accessed?

DISCUSSION Pavel Machek 2 participants 2 messages Jul 5, 2009

lore
Share & tools
lore
#0 lore raw

...happens with android phone doing usb storage emulation. I'm using static /dev/ ... I hope!

Jul  5 20:06:02 amd udevd-event[17666]: mknod(/dev/bus/usb/001/073, 020664, (189,72) failed: Operation not permitted 
Jul  5 20:06:07 amd kernel: scsi 24:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
Jul  5 20:06:07 amd kernel: sd 24:0:0:0: Attached scsi generic sg1 type 0
Jul  5 20:06:07 amd kernel: sd 24:0:0:0: [sdb] Attached SCSI removable disk
Jul  5 20:13:08 amd pand[17815]: Bluetooth PAN daemon version 3.36
...
Jul  5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] 3862528 512-byte hardware sectors: (1.97 GB/1.84 GiB)
Jul  5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through
Jul  5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through
Jul  5 20:51:02 amd kernel:  sdb: sdb1

You see? Partitions are only detected long after device is detected. IIRC it did not behave like that before...
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw
Quoted 15 lines · Pavel Machek

...happens with android phone doing usb storage emulation. I'm using static /dev/ ... I hope!

Jul  5 20:06:02 amd udevd-event[17666]: mknod(/dev/bus/usb/001/073, 020664, (189,72) failed: Operation not permitted 
Jul  5 20:06:07 amd kernel: scsi 24:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
Jul  5 20:06:07 amd kernel: sd 24:0:0:0: Attached scsi generic sg1 type 0
Jul  5 20:06:07 amd kernel: sd 24:0:0:0: [sdb] Attached SCSI removable disk
Jul  5 20:13:08 amd pand[17815]: Bluetooth PAN daemon version 3.36
...
Jul  5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] 3862528 512-byte hardware sectors: (1.97 GB/1.84 GiB)
Jul  5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through
Jul  5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through
Jul  5 20:51:02 amd kernel:  sdb: sdb1
Quoted 2 lines

You see? Partitions are only detected long after device is detected. IIRC it did not behave like that before...

Hi Pavel,

This doesn't seem to have anything to do with partition detection:
the partition line has the same time stamp as the scsi identify line ("3862528 512-byte hardware sectors").

Andries