2.6.31-rc0: sdb1 only starts to exist when sdb is accessed?
...happens with android phone doing usb storage emulation. I'm using static /dev/ ... I hope!
Jul 5 20:06:02 amd udevd-event[17666]: mknod(/dev/bus/usb/001/073, 020664, (189,72) failed: Operation not permitted Jul 5 20:06:07 amd kernel: scsi 24:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 Jul 5 20:06:07 amd kernel: sd 24:0:0:0: Attached scsi generic sg1 type 0 Jul 5 20:06:07 amd kernel: sd 24:0:0:0: [sdb] Attached SCSI removable disk Jul 5 20:13:08 amd pand[17815]: Bluetooth PAN daemon version 3.36 ... Jul 5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] 3862528 512-byte hardware sectors: (1.97 GB/1.84 GiB) Jul 5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through Jul 5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through Jul 5 20:51:02 amd kernel: sdb: sdb1
You see? Partitions are only detected long after device is detected. IIRC it did not behave like that before...
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 15 lines · Pavel Machek
...happens with android phone doing usb storage emulation. I'm using static
/dev/... I hope!Jul 5 20:06:02 amd udevd-event[17666]: mknod(/dev/bus/usb/001/073, 020664, (189,72) failed: Operation not permitted Jul 5 20:06:07 amd kernel: scsi 24:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 Jul 5 20:06:07 amd kernel: sd 24:0:0:0: Attached scsi generic sg1 type 0 Jul 5 20:06:07 amd kernel: sd 24:0:0:0: [sdb] Attached SCSI removable disk Jul 5 20:13:08 amd pand[17815]: Bluetooth PAN daemon version 3.36 ... Jul 5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] 3862528 512-byte hardware sectors: (1.97 GB/1.84 GiB) Jul 5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through Jul 5 20:51:02 amd kernel: sd 24:0:0:0: [sdb] Assuming drive cache: write through Jul 5 20:51:02 amd kernel: sdb: sdb1
Quoted 2 lines
You see? Partitions are only detected long after device is detected. IIRC it did not behave like that before...
Hi Pavel,
This doesn't seem to have anything to do with partition detection:
the partition line has the same time stamp as the scsi identify line ("3862528 512-byte hardware sectors").
Andries