powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards
Subsystems (2)
PATCH 1/1 powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards
Sometimes (e.g. when there are no UEMs attached to a board) fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY, this is because get_phy_id() returns bogus 0x0000ffff values (0xffffffff is expected), and therefore mdio bus probing fails with the following message:
fsl-pq_mdio: probe of e0082120.mdio failed with error -16
And obviously ethernet doesn't work after this.
This patch solves the problem by adding tbi-phy node into mdio node, so that we won't scan for spare addresses, we'll just use a fixed one.
--- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc8569mds.dts +4 -0
@@ -502,6 +502,10 @@ reg = <0x6>; device_type = "ethernet-phy"; }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; mdio@3520 { #address-cells = <1>;
Signature · 1 line
1.6.3.3
Quoted 6 lines · Anton Vorontsov
Sometimes (e.g. when there are no UEMs attached to a board)
fsl_pq_mdio_find_free()fails to find a spare address for a TBI PHY, this is becauseget_phy_id()returns bogus0x0000ffffvalues (0xffffffffis expected), and therefore mdio bus probing fails with the following message:
Quoted 8 lines
fsl-pq_mdio: probe of e0082120.mdio failed with error -16
And obviously ethernet doesn't work after this.
This patch solves the problem by adding tbi-phy node into mdio node, so that we won't scan for spare addresses, we'll just use a fixed one.
Signed-off-by Anton Vorontsov <[email protected]>
Kumar,
I believe this patch is suitable for 2.6.31, no?
Thanks,
Quoted 25 lines
--- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)arch/powerpc/boot/dts/mpc8569mds.dts +4
-0@@ -502,6 +502,10 @@ reg = <0x6>; device_type = "ethernet-phy"; }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; mdio@3520 { #address-cells = <1>;Signature · 5 lines
1.6.3.3 _______________________________________________ Linuxppc-dev mailing list [email protected] https://lists.ozlabs.org/listinfo/linuxppc-dev
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Kumar Gala
AppliedQuoted 10 lines · Anton Vorontsov
Sometimes (e.g. when there are no UEMs attached to a board)
fsl_pq_mdio_find_free()fails to find a spare address for a TBI PHY, this is becauseget_phy_id()returns bogus0x0000ffffvalues (0xffffffffis expected), and therefore mdio bus probing fails with the following message:fsl-pq_mdio: probe of e0082120.mdio failed with error -16
And obviously ethernet doesn't work after this.
Quoted 7 lines
This patch solves the problem by adding tbi-phy node into mdio node, so that we won't scan for spare addresses, we'll just use a fixed one.
Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/boot/dts/mpc8569mds.dts| 4 ++++1 files changed, 4 insertions(+), 0 deletions(-)
applied to merge
- k