2.6.31-rc3: replugging USB serial converter uses new device node
Hi,
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
==poff==
UEVENT[1247946169.580772] remove /devices/virtual/net/ppp0 (net)
UDEV [1247946169.589775] remove /devices/virtual/net/ppp0 (net)
==unplug==
UEVENT[1247946186.700698] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty) UEVENT[1247946186.700737] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial) UEVENT[1247946186.700749] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UEVENT[1247946186.700760] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device) UEVENT[1247946186.700771] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UDEV [1247946186.701535] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty) UDEV [1247946186.705822] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial) UDEV [1247946186.711662] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UDEV [1247946186.715237] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device) UDEV [1247946186.718872] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) ==replug== UEVENT[1247946199.654628] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UDEV [1247946199.660946] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UEVENT[1247946199.661096] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UEVENT[1247946199.688206] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial) UEVENT[1247946199.688254] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty) UEVENT[1247946199.688266] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device) UDEV [1247946199.710642] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UDEV [1247946199.713898] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial) UDEV [1247946199.729618] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device) UDEV [1247946199.739566] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)
==pon==
UEVENT[1247946268.571857] add /devices/virtual/net/ppp0 (net)
UDEV [1247946268.593127] add /devices/virtual/net/ppp0 (net)
Dmesg is available at http://pastebin.com/d516e3e00.
Signature · 2 lines
Regards, Feri.
Quoted 2 lines · Ferenc Wagner
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug.
I forgot to stress that the number increases if I use the device before unplug only. Simply yanking/replugging the connector makes the same device number disappear/reappear. Maybe pppd does something special, which makes the old device "stick", even though pppd dies at the end of the session.
Signature · 1 line
Feri.
(cc linux-usb)
Quoted 30 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:
Hi,
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
==poff==
UEVENT[1247946169.580772] remove /devices/virtual/net/ppp0 (net)
UDEV [1247946169.589775] remove /devices/virtual/net/ppp0 (net)
==unplug==UEVENT[1247946186.700698] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty) UEVENT[1247946186.700737] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial) UEVENT[1247946186.700749] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UEVENT[1247946186.700760] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device) UEVENT[1247946186.700771] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UDEV [1247946186.701535] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty) UDEV [1247946186.705822] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial) UDEV [1247946186.711662] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UDEV [1247946186.715237] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device) UDEV [1247946186.718872] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) ==replug== UEVENT[1247946199.654628] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UDEV [1247946199.660946] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UEVENT[1247946199.661096] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UEVENT[1247946199.688206] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial) UEVENT[1247946199.688254] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty) UEVENT[1247946199.688266] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device) UDEV [1247946199.710642] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UDEV [1247946199.713898] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial) UDEV [1247946199.729618] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device) UDEV [1247946199.739566] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)
Quoted 5 lines
==pon==
UEVENT[1247946268.571857] add /devices/virtual/net/ppp0 (net)
UDEV [1247946268.593127] add /devices/virtual/net/ppp0 (net)Dmesg is available at http://pastebin.com/d516e3e00.
Can anyone say whether this is expected behaviour?
Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.
Quoted 36 lines · Andrew Morton
Quoted 34 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:
Hi,
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
==poff==
UEVENT[1247946169.580772] remove /devices/virtual/net/ppp0 (net)
UDEV [1247946169.589775] remove /devices/virtual/net/ppp0 (net)
==unplug==UEVENT[1247946186.700698] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty) UEVENT[1247946186.700737] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial) UEVENT[1247946186.700749] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UEVENT[1247946186.700760] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device) UEVENT[1247946186.700771] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UDEV [1247946186.701535] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty) UDEV [1247946186.705822] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial) UDEV [1247946186.711662] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UDEV [1247946186.715237] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device) UDEV [1247946186.718872] remove /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) ==replug== UEVENT[1247946199.654628] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UDEV [1247946199.660946] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb) UEVENT[1247946199.661096] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UEVENT[1247946199.688206] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial) UEVENT[1247946199.688254] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty) UEVENT[1247946199.688266] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device) UDEV [1247946199.710642] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb) UDEV [1247946199.713898] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial) UDEV [1247946199.729618] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device) UDEV [1247946199.739566] add /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)==pon==
UEVENT[1247946268.571857] add /devices/virtual/net/ppp0 (net)
UDEV [1247946268.593127] add /devices/virtual/net/ppp0 (net)
Quoted 4 lines
Quoted 1 line
Dmesg is available at http://pastebin.com/d516e3e00.
Can anyone say whether this is expected behaviour? Does it actually cause any observeable problems?
The main problem is that I have to change my ppp config before each pon. I guess it could be solved by some udev trickery, but didn't want to go that route before getting sure it's expected behaviour, which I find improbable as it depends on a pppd run in the middle. That's also why I didn't report it as an USB problem originally.
Signature · 2 lines
Thanks, Feri.
Quoted 8 lines · Andrew Morton
(cc linux-usb)
Quoted 4 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:
Hi,
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
...
Quoted 3 lines
Quoted 1 line
Dmesg is available at http://pastebin.com/d516e3e00.
Can anyone say whether this is expected behaviour?
It depends on whether a program is still holding the old device file open when the replug occurs.
Quoted 2 lines
Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.
The numbers will get reused after the corresponding device files are closed.
For further discussion, see this thread:
http://marc.info/?t=124828810800002&r=1&w=2
Alan Stern
Quoted 10 lines · Alan Stern
Quoted 4 lines · Andrew Morton
Quoted 2 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
...
Quoted 3 lines
Quoted 1 line
Dmesg is available at http://pastebin.com/d516e3e00.
Can anyone say whether this is expected behaviour?
Quoted 8 lines
It depends on whether a program is still holding the old device file open when the replug occurs.
Quoted 2 lines
Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.
The numbers will get reused after the corresponding device files are closed.
You might find a symlink for ttyUSB devices to the actual device node, which does not depend on the kernel name, in:
/dev/serial/
|-- by-id
| `-- usb-067b_2303-if00-port0 -> ../../ttyUSB0
`-- by-path
`-- pci-0000:00:1d.7-usb-0:1.1.3.2:1.0-port0 -> ../../ttyUSB0
Quoted 3 lines
For further discussion, see this thread:
I can't find the original message to reply, but the device node is always deleted and re-created when the device goes away and comes back.
Thanks,
Kay
Quoted 10 lines · On Thu, 23 Jul 2009 10:44:13 -0400 (EDT) Alan Stern…
Quoted 8 lines · Andrew Morton
(cc linux-usb)
Quoted 4 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:
Hi,
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
Quoted 7 lines
...
Quoted 3 lines
Quoted 1 line
Dmesg is available at http://pastebin.com/d516e3e00.
Can anyone say whether this is expected behaviour?
It depends on whether a program is still holding the old device file open when the replug occurs.
But this is new behaviour in 2.6.31-rcX. Was something changed in this area?
Quoted 11 lines
Quoted 2 lines
Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.
The numbers will get reused after the corresponding device files are closed.
For further discussion, see this thread:
http://marc.info/?t=124828810800002&r=1&w=2Alan Stern
Quoted 11 lines · Andrew Morton
Quoted 9 lines
Quoted 2 lines
Quoted 2 lines
Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:
...
Quoted 3 lines
Quoted 1 line
Dmesg is available at http://pastebin.com/d516e3e00.
Can anyone say whether this is expected behaviour?
It depends on whether a program is still holding the old device file open when the replug occurs.
But this is new behaviour in 2.6.31-rcX. Was something changed in this area?
The tty core and usb-serial have both undergone extensive changes, courtesy of Alan Cox.
Alan Stern