Skip to contentSkip to conversation

2.6.31-rc3: replugging USB serial converter uses new device node

DISCUSSION Ferenc Wagner 4 participants 8 messages Jul 18, 2009 – Jul 23, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:

==poff==
UEVENT[1247946169.580772] remove /devices/virtual/net/ppp0 (net)
UDEV [1247946169.589775] remove /devices/virtual/net/ppp0 (net)
==unplug==

UEVENT[1247946186.700698] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty)
UEVENT[1247946186.700737] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial)
UEVENT[1247946186.700749] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UEVENT[1247946186.700760] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device)
UEVENT[1247946186.700771] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UDEV  [1247946186.701535] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty)
UDEV  [1247946186.705822] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial)
UDEV  [1247946186.711662] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UDEV  [1247946186.715237] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device)
UDEV  [1247946186.718872] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
==replug==
UEVENT[1247946199.654628] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UDEV  [1247946199.660946] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UEVENT[1247946199.661096] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UEVENT[1247946199.688206] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial)
UEVENT[1247946199.688254] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)
UEVENT[1247946199.688266] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device)
UDEV  [1247946199.710642] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UDEV  [1247946199.713898] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial)
UDEV  [1247946199.729618] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device)
UDEV  [1247946199.739566] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)

==pon==
UEVENT[1247946268.571857] add /devices/virtual/net/ppp0 (net)
UDEV [1247946268.593127] add /devices/virtual/net/ppp0 (net)

Dmesg is available at http://pastebin.com/d516e3e00.

Signature · 2 lines
Regards,
Feri.
#1 lore raw
Quoted 2 lines · Ferenc Wagner

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug.

I forgot to stress that the number increases if I use the device before unplug only. Simply yanking/replugging the connector makes the same device number disappear/reappear. Maybe pppd does something special, which makes the old device "stick", even though pppd dies at the end of the session.

Signature · 1 line
Feri.
#2 lore raw
In reply to Ferenc Wagner

(cc linux-usb)

Quoted 30 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:

Hi,

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:

==poff==
UEVENT[1247946169.580772] remove /devices/virtual/net/ppp0 (net)
UDEV [1247946169.589775] remove /devices/virtual/net/ppp0 (net)
==unplug==

UEVENT[1247946186.700698] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty)
UEVENT[1247946186.700737] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial)
UEVENT[1247946186.700749] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UEVENT[1247946186.700760] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device)
UEVENT[1247946186.700771] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UDEV  [1247946186.701535] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty)
UDEV  [1247946186.705822] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial)
UDEV  [1247946186.711662] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UDEV  [1247946186.715237] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device)
UDEV  [1247946186.718872] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
==replug==
UEVENT[1247946199.654628] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UDEV  [1247946199.660946] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UEVENT[1247946199.661096] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UEVENT[1247946199.688206] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial)
UEVENT[1247946199.688254] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)
UEVENT[1247946199.688266] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device)
UDEV  [1247946199.710642] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UDEV  [1247946199.713898] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial)
UDEV  [1247946199.729618] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device)
UDEV  [1247946199.739566] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)
Quoted 5 lines

==pon==
UEVENT[1247946268.571857] add /devices/virtual/net/ppp0 (net)
UDEV [1247946268.593127] add /devices/virtual/net/ppp0 (net)

Dmesg is available at http://pastebin.com/d516e3e00.

Can anyone say whether this is expected behaviour?

Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.

#3 lore raw
Quoted 36 lines · Andrew Morton
Quoted 34 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:

Hi,

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:

==poff==
UEVENT[1247946169.580772] remove /devices/virtual/net/ppp0 (net)
UDEV [1247946169.589775] remove /devices/virtual/net/ppp0 (net)
==unplug==

UEVENT[1247946186.700698] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty)
UEVENT[1247946186.700737] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial)
UEVENT[1247946186.700749] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UEVENT[1247946186.700760] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device)
UEVENT[1247946186.700771] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UDEV  [1247946186.701535] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2/tty/ttyUSB2 (tty)
UDEV  [1247946186.705822] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB2 (usb-serial)
UDEV  [1247946186.711662] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UDEV  [1247946186.715237] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.6 (usb_device)
UDEV  [1247946186.718872] remove   /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
==replug==
UEVENT[1247946199.654628] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UDEV  [1247946199.660946] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1 (usb)
UEVENT[1247946199.661096] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UEVENT[1247946199.688206] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial)
UEVENT[1247946199.688254] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)
UEVENT[1247946199.688266] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device)
UDEV  [1247946199.710642] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 (usb)
UDEV  [1247946199.713898] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3 (usb-serial)
UDEV  [1247946199.729618] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/usb_device/usbdev3.7 (usb_device)
UDEV  [1247946199.739566] add      /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/ttyUSB3/tty/ttyUSB3 (tty)

==pon==
UEVENT[1247946268.571857] add /devices/virtual/net/ppp0 (net)
UDEV [1247946268.593127] add /devices/virtual/net/ppp0 (net)

Quoted 4 lines
Quoted 1 line

Dmesg is available at http://pastebin.com/d516e3e00.

Can anyone say whether this is expected behaviour? Does it actually cause any observeable problems?

The main problem is that I have to change my ppp config before each pon. I guess it could be solved by some udev trickery, but didn't want to go that route before getting sure it's expected behaviour, which I find improbable as it depends on a pppd run in the middle. That's also why I didn't report it as an USB problem originally.

Signature · 2 lines
Thanks,
Feri.
#4 lore raw
In reply to Andrew Morton
Quoted 8 lines · Andrew Morton

(cc linux-usb)

Quoted 4 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:

Hi,

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:

...

Quoted 3 lines
Quoted 1 line

Dmesg is available at http://pastebin.com/d516e3e00.

Can anyone say whether this is expected behaviour?

It depends on whether a program is still holding the old device file open when the replug occurs.

Quoted 2 lines

Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.

The numbers will get reused after the corresponding device files are closed.

For further discussion, see this thread:

	http://marc.info/?t=124828810800002&r=1&w=2

Alan Stern

#5 lore raw
Quoted 10 lines · Alan Stern
Quoted 4 lines · Andrew Morton
Quoted 2 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug.  Output of udevadm monitor:

...

Quoted 3 lines
Quoted 1 line

Dmesg is available at http://pastebin.com/d516e3e00.

Can anyone say whether this is expected behaviour?

Quoted 8 lines

It depends on whether a program is still holding the old device file open when the replug occurs.

Quoted 2 lines

Does it actually cause any observeable problems?  I expect things will get ugly once it runs out of range.

The numbers will get reused after the corresponding device files are closed.

You might find a symlink for ttyUSB devices to the actual device node, which does not depend on the kernel name, in:
/dev/serial/
|-- by-id
| `-- usb-067b_2303-if00-port0 -> ../../ttyUSB0
`-- by-path

      `-- pci-0000:00:1d.7-usb-0:1.1.3.2:1.0-port0 -> ../../ttyUSB0
Quoted 3 lines

For further discussion, see this thread:

       http://marc.info/?t=124828810800002&r=1&w=2

I can't find the original message to reply, but the device node is always deleted and re-created when the device goes away and comes back.

Thanks,
Kay

#6 lore raw
In reply to Alan Stern
Quoted 10 lines · On Thu, 23 Jul 2009 10:44:13 -0400 (EDT) Alan Stern…
Quoted 8 lines · Andrew Morton

(cc linux-usb)

Quoted 4 lines · On Sat, 18 Jul 2009 22:04:57 +0200 Ferenc Wagner <[email protected]> wrote:

Hi,

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:

Quoted 7 lines

...

Quoted 3 lines
Quoted 1 line

Dmesg is available at http://pastebin.com/d516e3e00.

Can anyone say whether this is expected behaviour?

It depends on whether a program is still holding the old device file open when the replug occurs.

But this is new behaviour in 2.6.31-rcX. Was something changed in this area?

Quoted 11 lines
Quoted 2 lines

Does it actually cause any observeable problems? I expect things will get ugly once it runs out of range.

The numbers will get reused after the corresponding device files are closed.

For further discussion, see this thread:

	http://marc.info/?t=124828810800002&r=1&w=2

Alan Stern

#7 lore raw
Quoted 11 lines · Andrew Morton
Quoted 9 lines
Quoted 2 lines
Quoted 2 lines

Since upgrading to 2.6.31-rc3 from 2.6.30, my ttyUSB device number keeps increasing on each replug. Output of udevadm monitor:

...

Quoted 3 lines
Quoted 1 line

Dmesg is available at http://pastebin.com/d516e3e00.

Can anyone say whether this is expected behaviour?

It depends on whether a program is still holding the old device file open when the replug occurs.

But this is new behaviour in 2.6.31-rcX. Was something changed in this area?

The tty core and usb-serial have both undergone extensive changes, courtesy of Alan Cox.

Alan Stern