Skip to contentSkip to conversation

rcu: Add diagnostic check for a possible CPU-hotplug race

tip:core/rcu tip-bot for Paul E. McKenney 3 participants 23 messages Aug 2, 2009 – Aug 9, 2009 Page 1 of 2

Subsystems (2)
lore
Share & tools
lore
#0 lore raw
Commit-ID:  7256cf0e83bf018be8a81806593aaef7f2437f0b
Gitweb:     http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sun, 2 Aug 2009 21:31:28 +0200

rcu: Add diagnostic check for a possible CPU-hotplug race

Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.

LKML-Reference: <new-submission>

---
 kernel/rcutree.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
kernel/rcutree.c +2 -0
index 3313244..b9b1928 100644
@@ -1132,6 +1132,8 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 {
 	unsigned long flags;
 
+	WARN_ON_ONCE(rdp->beenonline == 0);
+
 	/*
 	 * If an RCU GP has gone long enough, go check for dyntick
 	 * idle CPUs and, if needed, send resched IPIs.
#1 lore raw
Quoted 7 lines · tip-bot for Paul E. McKenney
Commit-ID:  7256cf0e83bf018be8a81806593aaef7f2437f0b
Gitweb:     http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sun, 2 Aug 2009 21:31:28 +0200
Quoted 8 lines

rcu: Add diagnostic check for a possible CPU-hotplug race

Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.

LKML-Reference: <new-submission>

FYI, the new warning triggered in -tip testing:

calling tracer_alloc_buffers+0x0/0x296 @ 1
initcall tracer_alloc_buffers+0x0/0x296 returned 0 after 0 usecs calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4021.85 BogoMIPS (lpj=6700572)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 5 MCE banks
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs
Total of 2 processors activated (8043.58 BogoMIPS).

------------[ cut here ]------------
WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x2c/0xb9()
Hardware name: System Product Name
Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #280
Call Trace:
 [<c105229d>] warn_slowpath_common+0x60/0x90
 [<c10522df>] warn_slowpath_null+0x12/0x15
 [<c1091f70>] __rcu_process_callbacks+0x2c/0xb9
 [<c1092021>] rcu_process_callbacks+0x24/0x42
 [<c105737c>] __do_softirq+0xbc/0x16f
 [<c105746a>] do_softirq+0x3b/0x5f
 [<c10575c2>] irq_exit+0x3a/0x6d
 [<c10318cb>] smp_apic_timer_interrupt+0x74/0x82
 [<c101f0af>] apic_timer_interrupt+0x2f/0x40
 [<c101d7c2>] ? cpu_idle+0x77/0x99
 [<c10370e0>] ? native_safe_halt+0xa/0xc
 [<c10248cf>] default_idle+0x80/0xd1
 [<c101d7c8>] cpu_idle+0x7d/0x99
 [<c1f806f1>] start_secondary+0xf7/0xf9
---[ end trace 4eaa2a86a8e2da22 ]---

CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
device: 'platform': device_add
khelper used greatest stack depth: 6632 bytes left
bus: 'platform': registered
Registering sysdev class 'cpu'
calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs calling net_ns_init+0x0/0x120 @ 1
initcall net_ns_init+0x0/0x120 returned 0 after 0 usecs

with the attached config.

Ingo

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sun Aug 2 22:16:02 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED is not set
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
CONFIG_BROKEN_BOOT_DISALLOWED=y
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_TREE_RCU_TRACE=y
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_IBS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP_SUPPORT=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set CONFIG_X86_RDC321X=y
# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y
CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
# CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M586MMX=y
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=y CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set CONFIG_UP_WANTED_1=y
# CONFIG_UP_WANTED_2 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_HIGHPTE is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_PM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
CONFIG_X86_E_POWERSAVER=y

#

# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_FTP is not set CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_NF_NAT_FTP is not set
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
# CONFIG_ACTISYS_DONGLE is not set
CONFIG_TEKRAM_DONGLE=y
CONFIG_TOIM3232_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
# CONFIG_MCP2120_DONGLE is not set
CONFIG_OLD_BELKIN_DONGLE=y
# CONFIG_ACT200L_DONGLE is not set
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
CONFIG_MCS_FIR=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_DEFAULT_PS_VALUE=0
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=y
CONFIG_ISL29003=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not set
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_FD_MCS is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=y
# CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not set
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_NCR_D700=y
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_NCR_Q720 is not set
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_IT8213=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_LEGACY=y
CONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_PATA_WINBOND_VLB=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks. #

#
# See the help texts for more information.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
# CONFIG_EL2 is not set
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
# CONFIG_3C515 is not set
CONFIG_ELMC=y
CONFIG_ELMC_II=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=y
CONFIG_ULTRAMCA=y
CONFIG_ULTRA=y
CONFIG_ULTRA32=y
CONFIG_SMC9194=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set CONFIG_AT1700=y
CONFIG_DEPCA=y
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
CONFIG_E2100=y
# CONFIG_EWRK3 is not set CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
CONFIG_ETH16I=y
CONFIG_NE2000=y
CONFIG_ZNET=y
# CONFIG_SEEQ8005 is not set CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_AC3200 is not set CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_CS89x0=y
CONFIG_E100=y
CONFIG_LNE390=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set CONFIG_NE3210=y
CONFIG_ES3210=y
# CONFIG_8139CP is not set CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_KS8842=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=y
# CONFIG_DE620 is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_VLAN is not set CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=y
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_NIU=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=y
CONFIG_QLGE=y
CONFIG_SFC=y
CONFIG_BE2NET=y
# CONFIG_TR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
# CONFIG_ARLAN is not set
CONFIG_WAVELAN=y
# CONFIG_WLAN_80211 is not set

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=y
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=y
CONFIG_ATM_HORIZON_DEBUG=y
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
# CONFIG_IEEE802154_DRIVERS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOL2TP=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_TELESPCI=y
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not set
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
# CONFIG_HISAX_NETJET_U is not set
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_HFC_PCI=y
# CONFIG_HISAX_W6692 is not set
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#

#
# HiSax sub driver modules
#
# CONFIG_HISAX_ST5481 is not set
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y

#
# Active cards
#
CONFIG_ISDN_DRV_PCBIT=y
CONFIG_ISDN_DRV_SC=y
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=y
CONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not set
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=y
CONFIG_ISTALLION=y
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MCA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_SCx200_I2C is not set
CONFIG_SCx200_ACB=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_PCF8575=y
CONFIG_SENSORS_PCA9539=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7473=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_HDAPS=y
CONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_AB3100_CORE=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_BQ24022=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_UWB is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_NET48XX is not set
CONFIG_LEDS_WRAP=y
CONFIG_LEDS_ALIX2=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_BD2802=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=y
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_SMX=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y

#
# TI VLYNQ
#
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_KSYM_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#2 lore raw
Quoted 12 lines · Ingo Molnar
Quoted 9 lines · tip-bot for Paul E. McKenney
Commit-ID:  7256cf0e83bf018be8a81806593aaef7f2437f0b
Gitweb:     http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sun, 2 Aug 2009 21:31:28 +0200

rcu: Add diagnostic check for a possible CPU-hotplug race

Quoted 8 lines
Quoted 6 lines

Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.

LKML-Reference: <new-submission>

FYI, the new warning triggered in -tip testing:

Yow!!! I never was able to get this to trigger... Of course, I never was able to reproduce the original problem, either.

Just so you know, one of the reasons it took me so long to come up with the fix is that this just isn't supposed to happen. Where I grew up, CPUs were supposed to come online -before- starting to handle softirqs. ;-)

Here is my reasoning:

o rcu_init(), which is invoked before a second CPU can possibly
come online, calls hotplug_notifier(), which causes rcu_barrier_cpu_hotplug() to be invoked in response to any CPU-hotplug event.

o We know rcu_init() really was called, because otherwise
open_softirq(RCU_SOFTIRQ) never gets called, so the softirq would never have happened. In addition, there should be a "Hierarchical RCU implementation" message in your bootlog. (Is there?)

o rcu_barrier_cpu_hotplug() unconditionally invokes
rcu_cpu_notify() on every CPU-hotplug event.

o rcu_cpu_notify() invokes rcu_online_cpu() in response to
any CPU_UP_PREPARE or CPU_UP_PREPARE_FROZEN CPU-hotplug event.

o The CPU_UP_PREPARE and CPU_UP_PREPARE_FROZEN CPU-hotplug events
happen before the CPU in question is capable of running any code.

o This looks to be the first onlining of this CPU during boot
(right?). So we cannot possibly have some strange situation where the end of the prior CPU-offline event overlaps with the current CPU-online event. (Yes, this isn't supposed to happen courtesy of CPU-hotplug locking, but impossibility is clearly no reason to dismiss possible scenarios for -this- particular bug.)

o Therefore the WARN_ON_ONCE() cannot possibly trigger.

This would be a convincing argument, aside from the fact that you really did make it trigger. So first, anything I am missing in the above? If not, could you please help me with the following, at least if the answers are readily available?

o Is rcu_init()'s "Hierarchical RCU implementation" log message
in your bootlog?

o Is _cpu_up() really being called, and, if so, is it really
invoking __raw_notifier_call_chain() with CPU_UP_PREPARE?

o Is this really during initial boot, or am I misreading your
bootlog? (The other reason I believe that this happened on the first CPU-online for this CPU is that ->beenonline, once set, is never cleared.)

Gautham, any thoughts on what might be happening here?

Thanx, Paul

Quoted 2,778 lines

calling tracer_alloc_buffers+0x0/0x296 @ 1
initcall tracer_alloc_buffers+0x0/0x296 returned 0 after 0 usecs calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4021.85 BogoMIPS (lpj=6700572)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 5 MCE banks
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs
Total of 2 processors activated (8043.58 BogoMIPS).

------------[ cut here ]------------
WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x2c/0xb9()
Hardware name: System Product Name
Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #280
Call Trace:
 [<c105229d>] warn_slowpath_common+0x60/0x90
 [<c10522df>] warn_slowpath_null+0x12/0x15
 [<c1091f70>] __rcu_process_callbacks+0x2c/0xb9
 [<c1092021>] rcu_process_callbacks+0x24/0x42
 [<c105737c>] __do_softirq+0xbc/0x16f
 [<c105746a>] do_softirq+0x3b/0x5f
 [<c10575c2>] irq_exit+0x3a/0x6d
 [<c10318cb>] smp_apic_timer_interrupt+0x74/0x82
 [<c101f0af>] apic_timer_interrupt+0x2f/0x40
 [<c101d7c2>] ? cpu_idle+0x77/0x99
 [<c10370e0>] ? native_safe_halt+0xa/0xc
 [<c10248cf>] default_idle+0x80/0xd1
 [<c101d7c8>] cpu_idle+0x7d/0x99
 [<c1f806f1>] start_secondary+0xf7/0xf9
---[ end trace 4eaa2a86a8e2da22 ]---

CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
device: 'platform': device_add
khelper used greatest stack depth: 6632 bytes left
bus: 'platform': registered
Registering sysdev class 'cpu'
calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs calling net_ns_init+0x0/0x120 @ 1
initcall net_ns_init+0x0/0x120 returned 0 after 0 usecs

with the attached config.

Ingo

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sun Aug 2 22:16:02 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED is not set
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
CONFIG_BROKEN_BOOT_DISALLOWED=y
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_TREE_RCU_TRACE=y
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_IBS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP_SUPPORT=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set CONFIG_X86_RDC321X=y
# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y
CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
# CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M586MMX=y
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=y CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set CONFIG_UP_WANTED_1=y
# CONFIG_UP_WANTED_2 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_HIGHPTE is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_PM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
CONFIG_X86_E_POWERSAVER=y

#

# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_FTP is not set CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_NF_NAT_FTP is not set
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
# CONFIG_ACTISYS_DONGLE is not set
CONFIG_TEKRAM_DONGLE=y
CONFIG_TOIM3232_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
# CONFIG_MCP2120_DONGLE is not set
CONFIG_OLD_BELKIN_DONGLE=y
# CONFIG_ACT200L_DONGLE is not set
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
CONFIG_MCS_FIR=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_DEFAULT_PS_VALUE=0
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=y
CONFIG_ISL29003=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not set
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_FD_MCS is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=y
# CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not set
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_NCR_D700=y
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_NCR_Q720 is not set
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_IT8213=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_LEGACY=y
CONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_PATA_WINBOND_VLB=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks. #

#
# See the help texts for more information.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
# CONFIG_EL2 is not set
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
# CONFIG_3C515 is not set
CONFIG_ELMC=y
CONFIG_ELMC_II=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=y
CONFIG_ULTRAMCA=y
CONFIG_ULTRA=y
CONFIG_ULTRA32=y
CONFIG_SMC9194=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set CONFIG_AT1700=y
CONFIG_DEPCA=y
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
CONFIG_E2100=y
# CONFIG_EWRK3 is not set CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
CONFIG_ETH16I=y
CONFIG_NE2000=y
CONFIG_ZNET=y
# CONFIG_SEEQ8005 is not set CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_AC3200 is not set CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_CS89x0=y
CONFIG_E100=y
CONFIG_LNE390=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set CONFIG_NE3210=y
CONFIG_ES3210=y
# CONFIG_8139CP is not set CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_KS8842=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=y
# CONFIG_DE620 is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_VLAN is not set CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=y
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_NIU=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=y
CONFIG_QLGE=y
CONFIG_SFC=y
CONFIG_BE2NET=y
# CONFIG_TR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
# CONFIG_ARLAN is not set
CONFIG_WAVELAN=y
# CONFIG_WLAN_80211 is not set

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=y
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=y
CONFIG_ATM_HORIZON_DEBUG=y
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
# CONFIG_IEEE802154_DRIVERS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOL2TP=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_TELESPCI=y
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not set
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
# CONFIG_HISAX_NETJET_U is not set
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_HFC_PCI=y
# CONFIG_HISAX_W6692 is not set
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#

#
# HiSax sub driver modules
#
# CONFIG_HISAX_ST5481 is not set
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y

#
# Active cards
#
CONFIG_ISDN_DRV_PCBIT=y
CONFIG_ISDN_DRV_SC=y
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=y
CONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not set
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=y
CONFIG_ISTALLION=y
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MCA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_SCx200_I2C is not set
CONFIG_SCx200_ACB=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_PCF8575=y
CONFIG_SENSORS_PCA9539=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7473=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_HDAPS=y
CONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_AB3100_CORE=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_BQ24022=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_UWB is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_NET48XX is not set
CONFIG_LEDS_WRAP=y
CONFIG_LEDS_ALIX2=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_BD2802=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=y
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_SMX=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y

#
# TI VLYNQ
#
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_KSYM_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#3 lore raw
Quoted 72 lines · Paul E. McKenney
Quoted 12 lines · Ingo Molnar
Quoted 9 lines · tip-bot for Paul E. McKenney
Commit-ID:  7256cf0e83bf018be8a81806593aaef7f2437f0b
Gitweb:     http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sun, 2 Aug 2009 21:31:28 +0200

rcu: Add diagnostic check for a possible CPU-hotplug race

Quoted 8 lines
Quoted 6 lines

Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.

LKML-Reference: <new-submission>

FYI, the new warning triggered in -tip testing:

Yow!!! I never was able to get this to trigger... Of course, I never was able to reproduce the original problem, either.

Just so you know, one of the reasons it took me so long to come up with the fix is that this just isn't supposed to happen. Where I grew up, CPUs were supposed to come online -before- starting to handle softirqs. ;-)

Here is my reasoning:

o rcu_init(), which is invoked before a second CPU can possibly
come online, calls hotplug_notifier(), which causes rcu_barrier_cpu_hotplug() to be invoked in response to any CPU-hotplug event.

o We know rcu_init() really was called, because otherwise
open_softirq(RCU_SOFTIRQ) never gets called, so the softirq would never have happened. In addition, there should be a "Hierarchical RCU implementation" message in your bootlog. (Is there?)

o rcu_barrier_cpu_hotplug() unconditionally invokes
rcu_cpu_notify() on every CPU-hotplug event.

o rcu_cpu_notify() invokes rcu_online_cpu() in response to
any CPU_UP_PREPARE or CPU_UP_PREPARE_FROZEN CPU-hotplug event.

o The CPU_UP_PREPARE and CPU_UP_PREPARE_FROZEN CPU-hotplug events
happen before the CPU in question is capable of running any code.

o This looks to be the first onlining of this CPU during boot
(right?). So we cannot possibly have some strange situation where the end of the prior CPU-offline event overlaps with the current CPU-online event. (Yes, this isn't supposed to happen courtesy of CPU-hotplug locking, but impossibility is clearly no reason to dismiss possible scenarios for -this- particular bug.)

o Therefore the WARN_ON_ONCE() cannot possibly trigger.

This would be a convincing argument, aside from the fact that you really did make it trigger. So first, anything I am missing in the above? If not, could you please help me with the following, at least if the answers are readily available?

o Is rcu_init()'s "Hierarchical RCU implementation" log message
in your bootlog?

o Is _cpu_up() really being called, and, if so, is it really
invoking __raw_notifier_call_chain() with CPU_UP_PREPARE?

Quoted 6 lines

o Is this really during initial boot, or am I misreading your
bootlog? (The other reason I believe that this happened on the first CPU-online for this CPU is that ->beenonline, once set, is never cleared.)

Gautham, any thoughts on what might be happening here?

And on the off-chance that someone is stomping on the notifier chain... Untested, probably does not compile. Diagnostic only, not for inclusion. If this doesn't trigger the WARN_ON_ONCE() added to rcu_init(), the idea would be to move the WARN_ON_ONCE() to rcu_process_callbacks(). If it does trigger there, then my guess would be that either someone is unregistering the RCU CPU-hotplug notifier or directly corrupting the notifier chain.

---

 include/linux/cpu.h |    3 +++
 kernel/cpu.c        |    5 +++++
 kernel/notifier.c   |   15 +++++++++++++++
 kernel/rcupdate.c   |    3 ++-
 4 files changed, 25 insertions(+), 1 deletion(-)
include/linux/cpu.h +3 -0
index 4d668e0..c8a8323 100644
@@ -51,6 +51,9 @@ struct notifier_block;
 #ifdef CONFIG_HOTPLUG_CPU
 extern int register_cpu_notifier(struct notifier_block *nb);
 extern void unregister_cpu_notifier(struct notifier_block *nb);
+extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
+extern int notifier_chain_is_registered(struct notifier_block *nl,
+		int (*fn)(struct notifier_block *, unsigned long, void *));
 #else
 
 #ifndef MODULE
kernel/cpu.c +5 -0
index 8ce1004..1b98862 100644
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)
 	return ret;
 }
 
+int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return notifier_chain_is_registered(&cpu_chain, fn);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 EXPORT_SYMBOL(register_cpu_notifier);
kernel/notifier.c +15 -0
index 61d5aa5..069e3d0 100644
@@ -59,6 +59,21 @@ static int notifier_chain_unregister(struct notifier_block **nl,
 	return -ENOENT;
 }
 
+int notifier_chain_is_registered(struct notifier_block *nl,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	rcu_read_lock();
+	while (nl != NULL) {
+		if (rcu_dereference(nl)->notifier_call == fn) {
+			rcu_read_unlock();
+			return 0;
+		}
+		nl = &(rcu_dereference(nl)->next);
+	}
+	rcu_read_unlock();
+	return -ENOENT;
+}
+
 /**
  * notifier_call_chain - Informs the registered notifiers about an event.
  *	@nl:		Pointer to head of the blocking notifier chain
kernel/rcupdate.c +2 -1
index 3fea910..30c3af7 100644
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)
 extern int rcu_cpu_notify(struct notifier_block *self,
 			  unsigned long action, void *hcpu);
 
-static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
+int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
 	rcu_cpu_notify(self, action, hcpu);
@@ -249,6 +249,7 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 void __init rcu_init(void)
 {
 	hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+	WARN_ON_ONCE(!cpu_notified(rcu_barrier_cpu_hotplug));
 	__rcu_init();
 }
 
#4 lore raw
In reply to Paul E. McKenney

i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?

Let me know if you still would like me to run your diagnostic patch too.

Ingo

[    0.000000] Linux version 2.6.31-rc5-tip (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #291 SMP PREEMPT Sun Aug 2 22:49:56 CEST 2009
[    0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 nolapic_timer hpet=disable idle=poll highmem=512m nopat acpi=off pci=nomsi
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] using polling idle threads.
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[    0.000000]  0000000000 - 003fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003fff0000
[    0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[    0.000000]   NODE_DATA [0000000000008000 - 0000000000046fff]
[    0.000000]   bootmap [0000000000047000 -  000000000004efff] pages 8
[    0.000000] (5 early reservations) ==> bootmem [0000000000 - 003fff0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00033f8d90]    TEXT DATA BSS ==> [0001000000 - 00033f8d90]
[    0.000000]   #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #4 [0000100000 - 0000300000]          PGTABLE ==> [0000100000 - 0000300000]
[    0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[    0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[    0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [ffff8800000f5680] f5680
[    0.000000]   mpc: f1400-f152c
[    0.000000]  [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880003800000-ffff880004dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262026
[    0.000000]   DMA zone: 88 pages used for memmap
[    0.000000]   DMA zone: 611 pages reserved
[    0.000000]   DMA zone: 3295 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5544 pages used for memmap
[    0.000000]   DMA32 zone: 252488 pages, LIFO batch:31
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]   mpc: f1400-f152c
[    0.000000] MPTABLE: OEM ID: OEM00000
[    0.000000] MPTABLE: Product ID: PROD00000000
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] Bus #0 is PCI   
[    0.000000] Bus #1 is PCI   
[    0.000000] Bus #2 is PCI   
[    0.000000] Bus #3 is PCI   
[    0.000000] Bus #4 is PCI   
[    0.000000] Bus #5 is PCI   
[    0.000000] Bus #6 is ISA   
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[    0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[    0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[    0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[    0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffffffff5fc000 (fee00000)
[    0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages at ffff88000347c000, static data 95072 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 255783
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 nolapic_timer hpet=disable idle=poll highmem=512m nopat acpi=off pci=nomsi
[    0.000000] debug: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 985624k/1048512k available (15196k kernel code, 408k absent, 62480k reserved, 9977k data, 868k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:424
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.639 MHz processor.
[    0.000015] spurious 8259A interrupt: IRQ7.
[    0.006744] Console: colour VGA+ 80x25
[    0.010000] console [ttyS0] enabled, bootconsole disabled
[    0.010000] console [ttyS0] enabled, bootconsole disabled
[    0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.010000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.010000] ... MAX_LOCK_DEPTH:          48
[    0.010000] ... MAX_LOCKDEP_KEYS:        8191
[    0.010000] ... CLASSHASH_SIZE:          4096
[    0.010000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.010000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.010000] ... CHAINHASH_SIZE:          16384
[    0.010000]  memory used by lock dependency info: 5823 kB
[    0.010000]  per task-struct memory footprint: 1920 bytes
[    0.010000] ------------------------
[    0.010000] | Locking API testsuite:
[    0.010000] ----------------------------------------------------------------------------
[    0.010000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.010000]   --------------------------------------------------------------------------
[    0.010000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.010000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.010000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.010000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.010000]   --------------------------------------------------------------------------
[    0.010000]               recursive read-lock:             |  ok  |             |failed|
[    0.010000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.010000]             mixed read-write-lock:             |failed|             |failed|
[    0.010000]             mixed write-read-lock:             |failed|             |failed|
[    0.010000]   --------------------------------------------------------------------------
[    0.010000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.010000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.010000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.010000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.010000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.010000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.010000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.010000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.010000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.010000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.010000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.010000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.010000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.010000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.010000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.010000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.010000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.010000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.010000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.010000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.010000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.010000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.010000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.010000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.010000]       hard-irq read-recursion/123:  ok  |
[    0.010000]       soft-irq read-recursion/123:  ok  |
[    0.010000]       hard-irq read-recursion/132:  ok  |
[    0.010000]       soft-irq read-recursion/132:  ok  |
[    0.010000]       hard-irq read-recursion/213:  ok  |
[    0.010000]       soft-irq read-recursion/213:  ok  |
[    0.010000]       hard-irq read-recursion/231:  ok  |
[    0.010000]       soft-irq read-recursion/231:  ok  |
[    0.010000]       hard-irq read-recursion/312:  ok  |
[    0.010000]       soft-irq read-recursion/312:  ok  |
[    0.010000]       hard-irq read-recursion/321:  ok  |
[    0.010000]       soft-irq read-recursion/321:  ok  |
[    0.010000] --------------------------------------------------------
[    0.010000] 133 out of 218 testcases failed, as expected. |
[    0.010000] ----------------------------------------------------
[    0.010000] ODEBUG: 11 of 11 active objects replaced
[    0.010000] ODEBUG: selftest passed
[    0.010013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.27 BogoMIPS (lpj=20106390)
[    0.020634] Security Framework initialized
[    0.024730] TOMOYO Linux initialized
[    0.028979] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.030924] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.040482] Mount-cache hash table entries: 256
[    0.050722] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.057847] CPU: L2 Cache: 512K (64 bytes/line)
[    0.060006] CPU 0/0x0 -> Node 0
[    0.063146] tseg: 0000000000
[    0.066032] CPU: Physical Processor ID: 0
[    0.070003] CPU: Processor Core ID: 0
[    0.073660] mce: CPU supports 5 MCE banks
[    0.080899] debug: unmapping init memory ffffffff8289a000..ffffffff828ac000
[    0.088243] Setting APIC routing to flat
[    0.090012] enabled ExtINT on CPU#0
[    0.093548] ExtINT not setup in hardware but reported by MP table
[    0.100094] ENABLING IO-APIC IRQs
[    0.103408] init IO_APIC IRQs
[    0.106371]  2-0 (apicid-pin) not connected
[    0.110021] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.117334] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.120014] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
[    0.127323] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
[    0.130000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
[    0.130000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.130000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.130000]  2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[    0.130000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.130000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.130000] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.130000] ..... (found apic 0 pin 0) ...
[    0.232854] ....... works.
[    0.235555] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.241237] Disabling APIC timer
[    0.250011] calling  migration_init+0x0/0x7f @ 1
[    0.254802] initcall migration_init+0x0/0x7f returned 0 after 0 usecs
[    0.260006] calling  spawn_ksoftirqd+0x0/0x7f @ 1
[    0.264792] initcall spawn_ksoftirqd+0x0/0x7f returned 0 after 0 usecs
[    0.270006] calling  init_call_single_data+0x0/0xd5 @ 1
[    0.275234] initcall init_call_single_data+0x0/0xd5 returned 0 after 0 usecs
[    0.280005] calling  spawn_softlockup_task+0x0/0x9b @ 1
[    0.290126] initcall spawn_softlockup_task+0x0/0x9b returned 0 after 0 usecs
[    0.297160] calling  relay_init+0x0/0x2d @ 1
[    0.300005] initcall relay_init+0x0/0x2d returned 0 after 0 usecs
[    0.306096] calling  tracer_alloc_buffers+0x0/0x2b6 @ 1
[    0.310195] initcall tracer_alloc_buffers+0x0/0x2b6 returned 0 after 0 usecs
[    0.320005] calling  init_trace_printk+0x0/0x2d @ 1
[    0.324882] initcall init_trace_printk+0x0/0x2d returned 0 after 0 usecs
[    0.330004] calling  trace_workqueue_early_init+0x0/0x164 @ 1
[    0.335806] initcall trace_workqueue_early_init+0x0/0x164 returned 0 after 0 usecs
[    0.350022] lockdep: fixing up alternatives.
[    0.354423] Booting processor 1 APIC 0x1 ip 0x6000
[    0.010000] Initializing CPU#1
[    0.010000] masked ExtINT on CPU#1
[    0.010000] Calibrating delay using timer specific routine.. 4020.69 BogoMIPS (lpj=20103483)
[    0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.010000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.010000] CPU 1/0x1 -> Node 0
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 1
[    0.010000] mce: CPU supports 5 MCE banks
[    0.520258] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
[    0.530009] ------------[ cut here ]------------
[    0.530019] WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x4b/0x294()
[    0.530024] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #291
[    0.530027] Call Trace:
[    0.530029]  <IRQ>  [<ffffffff810becbc>] ? __rcu_process_callbacks+0x4b/0x294
[    0.530037]  [<ffffffff8107c455>] warn_slowpath_common+0x68/0xab
[    0.530041]  [<ffffffff8107c4bf>] warn_slowpath_null+0x27/0x3d
[    0.530045]  [<ffffffff810becbc>] __rcu_process_callbacks+0x4b/0x294
[    0.530050]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    0.530055]  [<ffffffff810bef43>] rcu_process_callbacks+0x3e/0x76
[    0.530059]  [<ffffffff8108312a>] __do_softirq+0x12c/0x24b
[    0.530064]  [<ffffffff8102f44c>] call_softirq+0x1c/0x28
[    0.530068]  [<ffffffff8103177a>] do_softirq+0x56/0xb3
[    0.530073]  [<ffffffff810a5442>] ? tick_handle_periodic+0x35/0x9b
[    0.530077]  [<ffffffff8108274f>] irq_exit+0x57/0x7c
[    0.530083]  [<ffffffff81047643>] smp_apic_timer_interrupt+0xa0/0xc6
[    0.530088]  [<ffffffff8102ee33>] apic_timer_interrupt+0x13/0x20
[    0.530090]  <EOI>  [<ffffffff810374ca>] ? need_resched+0x53/0x54
[    0.530098]  [<ffffffff810375ac>] ? poll_idle+0x3c/0x5f
[    0.530102]  [<ffffffff8102d376>] ? enter_idle+0x38/0x4e
[    0.530106]  [<ffffffff8102d436>] ? cpu_idle+0xaa/0x110
[    0.530112]  [<ffffffff8290a187>] ? start_secondary+0x1c7/0x1e2
[    0.530119] ---[ end trace 93d72a36b9146f22 ]---
[    0.540003]  stepping 02
[    0.542554] Brought up 2 CPUs
[    0.550004] Total of 2 processors activated (8041.97 BogoMIPS).
[    0.556465] CPU0 attaching sched-domain:
[    0.560007]  domain 0: span 0-1 level CPU
[    0.564032]   groups: 0 1
[    0.570008] CPU1 attaching sched-domain:
[    0.573934]  domain 0: span 0-1 level CPU
[    0.577958]   groups: 1 0
[    0.581105] device: 'platform': device_add
[    0.585775] bus: 'platform': registered
[    0.589626] Registering sysdev class 'cpu'
[    0.590213] Registering sysdev class 'memory'
[    0.594788] Registering sys device of class 'memory'
[    0.600010] Registering sys device 'memory0'
[    0.604507] Registering sys device of class 'memory'
[    0.610008] Registering sys device 'memory1'
[    0.614511] Registering sys device of class 'memory'
[    0.620009] Registering sys device 'memory2'
[    0.624488] Registering sys device of class 'memory'
[    0.630008] Registering sys device 'memory3'
[    0.634469] Registering sys device of class 'memory'
[    0.640009] Registering sys device 'memory4'
[    0.644520] Registering sys device of class 'memory'
[    0.650008] Registering sys device 'memory5'
[    0.654481] Registering sys device of class 'memory'
[    0.660009] Registering sys device 'memory6'
[    0.664499] Registering sys device of class 'memory'
[    0.669460] Registering sys device 'memory7'
[    0.680699] calling  init_cpufreq_transition_notifier_list+0x0/0x42 @ 1
[    0.687308] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs
[    0.690006] calling  net_ns_init+0x0/0x11b @ 1
[    0.700016] initcall net_ns_init+0x0/0x11b returned 0 after 0 usecs
[    0.706277] calling  cpufreq_tsc+0x0/0x28 @ 1
[    0.710004] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[    0.716175] calling  print_banner+0x0/0xe @ 1
[    0.720035] Booting paravirtualized kernel on bare hardware
[    0.725605] initcall print_banner+0x0/0xe returned 0 after 0 usecs
[    0.730004] calling  init_smp_flush+0x0/0x64 @ 1
[    0.734617] initcall init_smp_flush+0x0/0x64 returned 0 after 0 usecs
[    0.740004] calling  sysctl_init+0x0/0x59 @ 1
[    0.744570] initcall sysctl_init+0x0/0x59 returned 0 after 0 usecs
[    0.750003] calling  ksysfs_init+0x0/0xe4 @ 1
[    0.754637] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs
[    0.760020] calling  async_init+0x0/0x69 @ 1
[    0.770004] initcall async_init+0x0/0x69 returned 0 after 0 usecs
[    0.776088] calling  init_jiffies_clocksource+0x0/0x39 @ 1
[    0.780008] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs
[    0.787309] calling  init_hw_breakpoint+0x0/0x39 @ 1
[    0.790006] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs
[    0.800027] calling  filelock_init+0x0/0x55 @ 1
[    0.804637] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs
[    0.810004] calling  init_misc_binfmt+0x0/0x67 @ 1
[    0.814800] initcall init_misc_binfmt+0x0/0x67 returned 0 after 0 usecs
[    0.820004] calling  init_script_binfmt+0x0/0x3b @ 1
[    0.824963] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs
[    0.830004] calling  init_elf_binfmt+0x0/0x3b @ 1
[    0.834704] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
[    0.840019] calling  init_compat_elf_binfmt+0x0/0x3b @ 1
[    0.850004] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
[    0.857128] calling  debugfs_init+0x0/0x80 @ 1
[    0.860011] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs
[    0.866269] calling  securityfs_init+0x0/0x77 @ 1
[    0.870011] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs
[    0.880019] calling  random32_init+0x0/0xff @ 1
[    0.884547] initcall random32_init+0x0/0xff returned 0 after 0 usecs
[    0.890003] calling  cpufreq_core_init+0x0/0xaa @ 1
[    0.894878] initcall cpufreq_core_init+0x0/0xaa returned 0 after 0 usecs
[    0.900005] calling  virtio_init+0x0/0x52 @ 1
[    0.904567] bus: 'virtio': registered
[    0.910005] initcall virtio_init+0x0/0x52 returned 0 after 9765 usecs
[    0.916434] calling  sock_init+0x0/0x80 @ 1
[    0.920220] initcall sock_init+0x0/0x80 returned 0 after 0 usecs
[    0.926216] calling  netpoll_init+0x0/0x69 @ 1
[    0.930004] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs
[    0.936268] calling  netlink_proto_init+0x0/0x169 @ 1
[    0.940054] NET: Registered protocol family 16
[    0.944557] initcall netlink_proto_init+0x0/0x169 returned 0 after 0 usecs
[    0.950027] calling  bdi_class_init+0x0/0x68 @ 1
[    0.954642] device class 'bdi': registering
[    0.960271] initcall bdi_class_init+0x0/0x68 returned 0 after 9765 usecs
[    0.970005] calling  kobject_uevent_init+0x0/0x7b @ 1
[    0.975070] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs
[    0.980004] calling  gpiolib_sysfs_init+0x0/0xbc @ 1
[    0.984961] device class 'gpio': registering
[    0.990252] initcall gpiolib_sysfs_init+0x0/0xbc returned 0 after 9765 usecs
[    0.997293] calling  pcibus_class_init+0x0/0x40 @ 1
[    1.000004] device class 'pci_bus': registering
[    1.004788] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs
[    1.010004] calling  pci_driver_init+0x0/0x39 @ 1
[    1.020227] bus: 'pci': registered
[    1.023630] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs
[    1.030005] calling  lcd_class_init+0x0/0x74 @ 1
[    1.034623] device class 'lcd': registering
[    1.039024] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs
[    1.040004] calling  backlight_class_init+0x0/0x84 @ 1
[    1.050003] device class 'backlight': registering
[    1.054907] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs
[    1.060005] calling  tty_class_init+0x0/0x58 @ 1
[    1.064617] device class 'tty': registering
[    1.070242] initcall tty_class_init+0x0/0x58 returned 0 after 9765 usecs
[    1.076936] calling  vtconsole_class_init+0x0/0xe8 @ 1
[    1.080005] device class 'vtconsole': registering
[    1.084930] device: 'vtcon0': device_add
[    1.090293] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 9765 usecs
[    1.100005] calling  register_node_type+0x0/0xa4 @ 1
[    1.104960] Registering sysdev class 'node'
[    1.109376] initcall register_node_type+0x0/0xa4 returned 0 after 0 usecs
[    1.110005] calling  spi_init+0x0/0xd4 @ 1
[    1.120238] bus: 'spi': registered
[    1.123635] device class 'spi_master': registering
[    1.128652] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs
[    1.130006] calling  i2c_init+0x0/0x8c @ 1
[    1.134334] bus: 'i2c': registered
[    1.140003] device class 'i2c-adapter': registering
[    1.145077] bus: 'i2c': add driver dummy
[    1.150253] initcall i2c_init+0x0/0x8c returned 0 after 19531 usecs
[    1.156512] calling  amd_postcore_init+0x0/0xa3 @ 1
[    1.160008] node 0 link 0: io port [1000, fffff]
[    1.164624] TOM: 0000000040000000 aka 1024M
[    1.170003] node 0 link 0: mmio [e0000000, efffffff]
[    1.174979] node 0 link 0: mmio [feb00000, fec0ffff]
[    1.180200] node 0 link 0: mmio [a0000, bffff]
[    1.184659] node 0 link 0: mmio [40000000, fed3ffff]
[    1.190215] bus: [00,ff] on node 0 link 0
[    1.194224] bus: 00 index 0 io port: [0, ffff]
[    1.200003] bus: 00 index 1 mmio: [40000000, fcffffffff]
[    1.205308] bus: 00 index 2 mmio: [feb00000, fec0ffff]
[    1.210003] bus: 00 index 3 mmio: [a0000, bffff]
[    1.214618] initcall amd_postcore_init+0x0/0xa3 returned 0 after 48828 usecs
[    1.220003] calling  arch_kdebugfs_init+0x0/0x2a7 @ 1
[    1.225086] initcall arch_kdebugfs_init+0x0/0x2a7 returned 0 after 0 usecs
[    1.230018] calling  mtrr_if_init+0x0/0x8a @ 1
[    1.234470] initcall mtrr_if_init+0x0/0x8a returned 0 after 0 usecs
[    1.240004] calling  dma_bus_init+0x0/0x66 @ 1
[    1.244442] device class 'dma': registering
[    1.250225] initcall dma_bus_init+0x0/0x66 returned 0 after 9765 usecs
[    1.260004] calling  dma_channel_table_init+0x0/0x137 @ 1
[    1.265409] initcall dma_channel_table_init+0x0/0x137 returned 0 after 0 usecs
[    1.270004] calling  dca_init+0x0/0x45 @ 1
[    1.274093] dca service started, version 1.8
[    1.280017] device class 'dca': registering
[    1.284444] initcall dca_init+0x0/0x45 returned 0 after 9765 usecs
[    1.290005] calling  pci_arch_init+0x0/0x67 @ 1
[    1.294841] PCI: Using configuration type 1 for base access
[    1.300005] initcall pci_arch_init+0x0/0x67 returned 0 after 9765 usecs
[    1.306609] calling  topology_init+0x0/0xe0 @ 1
[    1.310003] Registering sys device of class 'node'
[    1.314793] Registering sys device 'node0'
[    1.320256] Registering sys device of class 'cpu'
[    1.324956] Registering sys device 'cpu0'
[    1.330286] Registering sys device of class 'cpu'
[    1.334992] Registering sys device 'cpu1'
[    1.340225] initcall topology_init+0x0/0xe0 returned 0 after 29296 usecs
[    1.346919] calling  mtrr_init_finialize+0x0/0x64 @ 1
[    1.350006] initcall mtrr_init_finialize+0x0/0x64 returned 0 after 0 usecs
[    1.356874] calling  param_sysfs_init+0x0/0x37b @ 1
[    1.579904] initcall param_sysfs_init+0x0/0x37b returned 0 after 205078 usecs
[    1.581017] calling  init_slow_work+0x0/0x5f @ 1
[    1.590005] initcall init_slow_work+0x0/0x5f returned 0 after 0 usecs
[    1.596434] calling  default_bdi_init+0x0/0x5e @ 1
[    1.600020] device: 'default': device_add
[    1.604377] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs
[    1.611124] calling  init_bio+0x0/0x100 @ 1
[    1.621337] bio: create slab <bio-0> at 0
[    1.625444] initcall init_bio+0x0/0x100 returned 0 after 0 usecs
[    1.630925] calling  fsnotify_init+0x0/0x39 @ 1
[    1.635459] initcall fsnotify_init+0x0/0x39 returned 0 after 0 usecs
[    1.640005] calling  fsnotify_notification_init+0x0/0x129 @ 1
[    1.645853] initcall fsnotify_notification_init+0x0/0x129 returned 0 after 0 usecs
[    1.650026] calling  cryptomgr_init+0x0/0x39 @ 1
[    1.660005] initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs
[    1.666434] calling  blk_settings_init+0x0/0x51 @ 1
[    1.670004] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs
[    1.676694] calling  blk_ioc_init+0x0/0x51 @ 1
[    1.680043] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs
[    1.690019] calling  blk_softirq_init+0x0/0x8f @ 1
[    1.694805] initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs
[    1.700004] calling  genhd_device_init+0x0/0x8c @ 1
[    1.704875] device class 'block': registering
[    1.710394] initcall genhd_device_init+0x0/0x8c returned 0 after 9765 usecs
[    1.717344] calling  gpiolib_debugfs_init+0x0/0x4b @ 1
[    1.720122] initcall gpiolib_debugfs_init+0x0/0x4b returned 0 after 0 usecs
[    1.730004] calling  max7301_init+0x0/0x39 @ 1
[    1.734445] bus: 'spi': add driver max7301
[    1.738825] initcall max7301_init+0x0/0x39 returned 0 after 0 usecs
[    1.740261] calling  max732x_init+0x0/0x3b @ 1
[    1.750054] bus: 'i2c': add driver max732x
[    1.754367] initcall max732x_init+0x0/0x3b returned 0 after 0 usecs
[    1.760045] calling  mcp23s08_init+0x0/0x39 @ 1
[    1.764571] bus: 'spi': add driver mcp23s08
[    1.770071] initcall mcp23s08_init+0x0/0x39 returned 0 after 9765 usecs
[    1.776678] calling  pcf857x_init+0x0/0x3b @ 1
[    1.780003] bus: 'i2c': add driver pcf857x
[    1.784308] initcall pcf857x_init+0x0/0x3b returned 0 after 0 usecs
[    1.790005] calling  gpio_twl4030_init+0x0/0x39 @ 1
[    1.794874] bus: 'platform': add driver twl4030_gpio
[    1.800215] initcall gpio_twl4030_init+0x0/0x39 returned 0 after 9765 usecs
[    1.807173] calling  pci_slot_init+0x0/0x73 @ 1
[    1.810014] initcall pci_slot_init+0x0/0x73 returned 0 after 0 usecs
[    1.816364] calling  misc_init+0x0/0xd6 @ 1
[    1.820026] device class 'misc': registering
[    1.824517] initcall misc_init+0x0/0xd6 returned 0 after 0 usecs
[    1.830006] calling  cn_init+0x0/0x11a @ 1
[    1.834149] initcall cn_init+0x0/0x11a returned 0 after 0 usecs
[    1.840004] calling  tifm_init+0x0/0xab @ 1
[    1.844520] bus: 'tifm': registered
[    1.850003] device class 'tifm_adapter': registering
[    1.855186] initcall tifm_init+0x0/0xab returned 0 after 9765 usecs
[    1.860004] calling  tps_init+0x0/0xa4 @ 1
[    1.864094] tps65010: version 2 May 2005
[    1.870003] bus: 'i2c': add driver tps65010
[    1.874414] bus: 'i2c': remove driver tps65010
[    1.880261] driver: 'tps65010': driver_release
[    1.900010] bus: 'i2c': add driver tps65010
[    1.904449] bus: 'i2c': remove driver tps65010
[    1.909082] driver: 'tps65010': driver_release
[    1.930062] bus: 'i2c': add driver tps65010
[    1.934472] bus: 'i2c': remove driver tps65010
[    1.939102] driver: 'tps65010': driver_release
[    1.940034] tps65010: no chip?
[    1.943090] initcall tps_init+0x0/0xa4 returned -19 after 78125 usecs
[    1.950004] calling  twl4030_init+0x0/0x3b @ 1
[    1.954441] bus: 'i2c': add driver twl4030
[    1.960222] initcall twl4030_init+0x0/0x3b returned 0 after 9765 usecs
[    1.966739] calling  da903x_init+0x0/0x3b @ 1
[    1.970080] bus: 'i2c': add driver da903x
[    1.974311] initcall da903x_init+0x0/0x3b returned 0 after 0 usecs
[    1.980055] calling  pcf50633_init+0x0/0x3b @ 1
[    1.984579] bus: 'i2c': add driver pcf50633
[    1.990239] initcall pcf50633_init+0x0/0x3b returned 0 after 9765 usecs
[    1.996841] calling  init_scsi+0x0/0xb7 @ 1
[    2.000790] device class 'scsi_host': registering
[    2.005987] bus: 'scsi': registered
[    2.010026] device class 'scsi_device': registering
[    2.015146] SCSI subsystem initialized
[    2.020023] initcall init_scsi+0x0/0xb7 returned 0 after 19531 usecs
[    2.026366] calling  ata_init+0x0/0x3b3 @ 1
[    2.030339] libata version 3.00 loaded.
[    2.034175] initcall ata_init+0x0/0x3b3 returned 0 after 0 usecs
[    2.040007] calling  phy_init+0x0/0x57 @ 1
[    2.044096] device class 'mdio_bus': registering
[    2.050458] bus: 'mdio_bus': registered
[    2.054295] bus: 'mdio_bus': add driver Generic PHY
[    2.060234] initcall phy_init+0x0/0x57 returned 0 after 19531 usecs
[    2.066495] calling  usb_init+0x0/0x185 @ 1
[    2.070256] bus: 'usb': registered
[    2.073668] bus: 'usb': add driver usbfs
[    2.077830] usbcore: registered new interface driver usbfs
[    2.080012] bus: 'usb': add driver hub
[    2.083986] usbcore: registered new interface driver hub
[    2.090089] bus: 'usb': add driver usb
[    2.094047] usbcore: registered new device driver usb
[    2.100005] initcall usb_init+0x0/0x185 returned 0 after 29296 usecs
[    2.106355] calling  serio_init+0x0/0xb2 @ 1
[    2.110238] bus: 'serio': registered
[    2.113894] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs
[    2.120005] calling  gameport_init+0x0/0xb2 @ 1
[    2.124806] bus: 'gameport': registered
[    2.130088] initcall gameport_init+0x0/0xb2 returned 0 after 9765 usecs
[    2.136693] calling  input_init+0x0/0x15d @ 1
[    2.140004] device class 'input': registering
[    2.144608] initcall input_init+0x0/0x15d returned 0 after 0 usecs
[    2.150005] calling  pps_init+0x0/0xd7 @ 1
[    2.154096] device class 'pps': registering
[    2.160205] LinuxPPS API ver. 1 registered
[    2.164295] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    2.170006] initcall pps_init+0x0/0xd7 returned 0 after 19531 usecs
[    2.180003] calling  power_supply_class_init+0x0/0x5f @ 1
[    2.185396] device class 'power_supply': registering
[    2.190207] initcall power_supply_class_init+0x0/0x5f returned 0 after 9765 usecs
[    2.197681] calling  thermal_init+0x0/0x7e @ 1
[    2.200008] device class 'thermal': registering
[    2.204802] initcall thermal_init+0x0/0x7e returned 0 after 0 usecs
[    2.210004] calling  mmc_init+0x0/0x9c @ 1
[    2.214432] bus: 'mmc': registered
[    2.220004] device class 'mmc_host': registering
[    2.225103] bus: 'sdio': registered
[    2.230005] initcall mmc_init+0x0/0x9c returned 0 after 19531 usecs
[    2.236260] calling  leds_init+0x0/0x67 @ 1
[    2.240004] device class 'leds': registering
[    2.244485] initcall leds_init+0x0/0x67 returned 0 after 0 usecs
[    2.250006] calling  ac97_bus_init+0x0/0x39 @ 1
[    2.254789] bus: 'ac97': registered
[    2.258279] initcall ac97_bus_init+0x0/0x39 returned 0 after 0 usecs
[    2.260005] calling  pci_subsys_init+0x0/0x136 @ 1
[    2.270002] PCI: Probing PCI hardware
[    2.273683] PCI: Probing PCI hardware (bus 00)
[    2.278136] device: 'pci0000:00': device_add
[    2.280020] device: '0000:00': device_add
[    2.284259] PCI: Scanning bus 0000:00
[    2.290058] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
[    2.297060] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.300054] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
[    2.310030] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xec
[    2.316634] HPET not enabled in BIOS. You might try hpet=force boot option
[    2.320004] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.330045] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
[    2.337007] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
[    2.340015] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[    2.350006] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[    2.355749] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1dd
[    2.360013] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    2.365837] pci 0000:00:01.1: PME# disabled
[    2.370048] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
[    2.380014] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
[    2.386731] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.390012] pci 0000:00:02.0: supports D1 D2
[    2.394276] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.400004] pci 0000:00:02.0: PME# disabled
[    2.404204] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
[    2.410033] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[    2.420023] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1dd
[    2.426727] pci 0000:00:02.1: supports D1 D2
[    2.430003] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    2.440004] pci 0000:00:02.1: PME# disabled
[    2.444216] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
[    2.450029] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
[    2.455770] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
[    2.460009] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
[    2.466719] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.470012] pci 0000:00:04.0: supports D1 D2
[    2.480025] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
[    2.487000] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[    2.490028] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.500033] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
[    2.507001] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.510023] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
[    2.520014] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
[    2.526706] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
[    2.530036] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.536738] pci 0000:00:0a.0: supports D1 D2
[    2.540003] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.550004] pci 0000:00:0a.0: PME# disabled
[    2.554250] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
[    2.560021] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.566728] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.570019] pci 0000:00:0b.0: PME# disabled
[    2.574228] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
[    2.580020] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.590020] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.596626] pci 0000:00:0c.0: PME# disabled
[    2.600030] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
[    2.610035] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.616744] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.620004] pci 0000:00:0d.0: PME# disabled
[    2.624209] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
[    2.630020] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.640030] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.646633] pci 0000:00:0e.0: PME# disabled
[    2.650056] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[    2.660024] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.666744] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[    2.670024] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1dd
[    2.680019] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[    2.686991] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1dd
[    2.690034] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[    2.700023] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1dd
[    2.706740] PCI: Fixups for bus 0000:00
[    2.710005] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0
[    2.716964] PCI: Scanning bus 0000:05
[    2.720035] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
[    2.727005] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
[    2.730022] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
[    2.740027] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.746731] pci 0000:05:07.0: supports D1 D2
[    2.750003] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[    2.755743] pci 0000:05:07.0: PME# disabled
[    2.760047] PCI: Fixups for bus 0000:05
[    2.763880] pci 0000:00:09.0: transparent bridge
[    2.770019] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[    2.775759] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
[    2.780004] PCI: Bus scan for 0000:05 returning with max=05
[    2.785571] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0
[    2.790012] PCI: Scanning bus 0000:04
[    2.800056] PCI: Fixups for bus 0000:04
[    2.803895] PCI: Bus scan for 0000:04 returning with max=04
[    2.809468] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0
[    2.810027] PCI: Scanning bus 0000:03
[    2.820056] PCI: Fixups for bus 0000:03
[    2.823893] PCI: Bus scan for 0000:03 returning with max=03
[    2.829457] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0
[    2.830012] PCI: Scanning bus 0000:02
[    2.840056] PCI: Fixups for bus 0000:02
[    2.843896] PCI: Bus scan for 0000:02 returning with max=02
[    2.849468] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0
[    2.850027] PCI: Scanning bus 0000:01
[    2.860022] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
[    2.866977] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x47
[    2.870009] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[    2.876705] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
[    2.880007] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
[    2.890033] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    2.896387] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1dd
[    2.900021] pci 0000:01:00.0: supports D1 D2
[    2.904313] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
[    2.910009] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x47
[    2.920008] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
[    2.926729] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1dd
[    2.930034] pci 0000:01:00.1: supports D1 D2
[    2.940070] PCI: Fixups for bus 0000:01
[    2.943908] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
[    2.950004] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
[    2.956696] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
[    2.960003] PCI: Bus scan for 0000:01 returning with max=01
[    2.965569] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1
[    2.970021] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1
[    2.980007] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1
[    2.990005] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1
[    2.996957] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1
[    3.000005] PCI: Bus scan for 0000:00 returning with max=05
[    3.005568] device: '0000:00:00.0': device_add
[    3.010025] bus: 'pci': add device 0000:00:00.0
[    3.014867] device: '0000:00:01.0': device_add
[    3.020011] bus: 'pci': add device 0000:00:01.0
[    3.024813] device: '0000:00:01.1': device_add
[    3.030020] bus: 'pci': add device 0000:00:01.1
[    3.034810] device: '0000:00:02.0': device_add
[    3.040011] bus: 'pci': add device 0000:00:02.0
[    3.044828] device: '0000:00:02.1': device_add
[    3.050010] bus: 'pci': add device 0000:00:02.1
[    3.054798] device: '0000:00:04.0': device_add
[    3.060011] bus: 'pci': add device 0000:00:04.0
[    3.064853] device: '0000:00:06.0': device_add
[    3.069298] bus: 'pci': add device 0000:00:06.0
[    3.070257] device: '0000:00:09.0': device_add
[    3.074710] bus: 'pci': add device 0000:00:09.0
[    3.080277] device: '0000:00:0a.0': device_add
[    3.084723] bus: 'pci': add device 0000:00:0a.0
[    3.090266] device: '0000:00:0b.0': device_add
[    3.094716] bus: 'pci': add device 0000:00:0b.0
[    3.100286] device: '0000:00:0c.0': device_add
[    3.104736] bus: 'pci': add device 0000:00:0c.0
[    3.110279] device: '0000:00:0d.0': device_add
[    3.114725] bus: 'pci': add device 0000:00:0d.0
[    3.120326] device: '0000:00:0e.0': device_add
[    3.124770] bus: 'pci': add device 0000:00:0e.0
[    3.130269] device: '0000:00:18.0': device_add
[    3.134717] bus: 'pci': add device 0000:00:18.0
[    3.139532] device: '0000:00:18.1': device_add
[    3.140011] bus: 'pci': add device 0000:00:18.1
[    3.144818] device: '0000:00:18.2': device_add
[    3.150011] bus: 'pci': add device 0000:00:18.2
[    3.154801] device: '0000:00:18.3': device_add
[    3.160011] bus: 'pci': add device 0000:00:18.3
[    3.164820] device: '0000:05:07.0': device_add
[    3.170010] bus: 'pci': add device 0000:05:07.0
[    3.174803] device: '0000:05': device_add
[    3.180306] device: '0000:04': device_add
[    3.184542] device: '0000:03': device_add
[    3.188810] device: '0000:02': device_add
[    3.190235] device: '0000:01:00.0': device_add
[    3.194692] bus: 'pci': add device 0000:01:00.0
[    3.200279] device: '0000:01:00.1': device_add
[    3.204725] bus: 'pci': add device 0000:01:00.1
[    3.210268] device: '0000:01': device_add
[    3.214784] pci 0000:00:00.0: default IRQ router [10de:005e]
[    3.220374] initcall pci_subsys_init+0x0/0x136 returned 0 after 927734 usecs
[    3.227411] calling  proto_init+0x0/0x39 @ 1
[    3.230016] initcall proto_init+0x0/0x39 returned 0 after 0 usecs
[    3.240007] calling  net_dev_init+0x0/0x1c2 @ 1
[    3.244575] device class 'net': registering
[    3.249002] device: 'lo': device_add
[    3.250442] initcall net_dev_init+0x0/0x1c2 returned 0 after 9765 usecs
[    3.257049] calling  neigh_init+0x0/0x98 @ 1
[    3.260006] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs
[    3.270003] calling  fib_rules_init+0x0/0xcc @ 1
[    3.274619] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs
[    3.280007] calling  genl_init+0x0/0x100 @ 1
[    3.300047] initcall genl_init+0x0/0x100 returned 0 after 19531 usecs
[    3.306481] calling  cipso_v4_init+0x0/0xae @ 1
[    3.310024] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs
[    3.316373] calling  wanrouter_init+0x0/0x79 @ 1
[    3.320003] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    3.327322] initcall wanrouter_init+0x0/0x79 returned 0 after 0 usecs
[    3.330004] calling  irda_init+0x0/0xcb @ 1
[    3.334180] irda_init()
[    3.340099] NET: Registered protocol family 23
[    3.344686] initcall irda_init+0x0/0xcb returned 0 after 9765 usecs
[    3.350004] calling  bt_init+0x0/0x81 @ 1
[    3.354007] Bluetooth: Core ver 2.15
[    3.360101] device class 'bluetooth': registering
[    3.365007] NET: Registered protocol family 31
[    3.370003] Bluetooth: HCI device and connection manager initialized
[    3.376364] Bluetooth: HCI socket layer initialized
[    3.380005] initcall bt_init+0x0/0x81 returned 0 after 29296 usecs
[    3.386173] calling  wireless_nlevent_init+0x0/0x69 @ 1
[    3.390004] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs
[    3.400005] calling  cfg80211_init+0x0/0x9f @ 1
[    3.404527] device class 'ieee80211': registering
[    3.460063] Registering platform device 'regulatory.0'. Parent at platform
[    3.466925] device: 'regulatory.0': device_add
[    3.470011] bus: 'platform': add device regulatory.0
[    3.475183] cfg80211: Using static regulatory domain info
[    3.480004] cfg80211: Regulatory domain: US
[    3.484181] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.490003] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    3.500005] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.506781] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.510003] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.520025] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    3.526807] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    3.530045] cfg80211: Calling CRDA for country: US
[    3.535050] initcall cfg80211_init+0x0/0x9f returned 0 after 126953 usecs
[    3.540005] calling  ieee80211_init+0x0/0x45 @ 1
[    3.550016] initcall ieee80211_init+0x0/0x45 returned 0 after 0 usecs
[    3.556453] calling  netlbl_init+0x0/0xa8 @ 1
[    3.560002] NetLabel: Initializing
[    3.563402] NetLabel:  domain hash size = 128
[    3.567759] NetLabel:  protocols = UNLABELED CIPSOv4
[    3.570201] NetLabel:  unlabeled traffic allowed by default
[    3.575768] initcall netlbl_init+0x0/0xa8 returned 0 after 9765 usecs
[    3.580027] calling  rfkill_init+0x0/0xb1 @ 1
[    3.590002] device class 'rfkill': registering
[    3.594660] device: 'rfkill': device_add
[    3.598834] initcall rfkill_init+0x0/0xb1 returned 0 after 0 usecs
[    3.600005] calling  sysctl_init+0x0/0x6f @ 1
[    3.610006] initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs
[    3.616176] calling  pci_iommu_init+0x0/0x4a @ 1
[    3.679259] DMA-API: preallocated 32768 debug entries
[    3.680026] DMA-API: debugging enabled by kernel config
[    3.685252] initcall pci_iommu_init+0x0/0x4a returned 0 after 58593 usecs
[    3.690005] calling  print_all_ICs+0x0/0x5a1 @ 1
[    3.700002] 
[    3.700003] printing PIC contents
[    3.704807] ... PIC  IMR: fffa
[    3.707864] ... PIC  IRR: 0001
[    3.710002] ... PIC  ISR: 0001
[    3.713058] ... PIC ELCR: 0828
[    3.716116] printing local APIC contents on CPU#0/0:
[    3.720000] ... APIC ID:      00000000 (0)
[    3.720000] ... APIC VERSION: 00040010
[    3.720000] ... APIC TASKPRI: 00000000 (00)
[    3.720000] ... APIC ARBPRI: 000000e0 (e0)
[    3.720000] ... APIC PROCPRI: 00000000
[    3.720000] ... APIC LDR: 01000000
[    3.720000] ... APIC DFR: ffffffff
[    3.720000] ... APIC SPIV: 000001ff
[    3.720000] ... APIC ISR field:
[    3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[    3.720000] ... APIC TMR field:
[    3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[    3.720000] ... APIC IRR field:
[    3.720000] 0000000000000000000000000000000000000000000000000000000000008000
[    3.720000] ... APIC ESR: 00000000
[    3.720000] ... APIC ICR: 000008ef
[    3.720000] ... APIC ICR2: 02000000
[    3.720000] ... APIC LVTT: 00010000
[    3.720000] ... APIC LVTPC: 00010000
[    3.720000] ... APIC LVT0: 00010700
[    3.720000] ... APIC LVT1: 00000400
[    3.720000] ... APIC LVTERR: 000000fe
[    3.720000] ... APIC TMICT: 00000000
[    3.720000] ... APIC TMCCT: 00000000
[    3.720000] ... APIC TDCR: 00000000
[    3.720000] 
[    3.719992] printing local APIC contents on CPU#1/1:
[    3.719992] ... APIC ID:      01000000 (1)
[    3.720000] ... APIC VERSION: 00040010
[    3.720000] ... APIC TASKPRI: 00000000 (00)
[    3.720000] ... APIC ARBPRI: 00000030 (30)
[    3.720000] ... APIC PROCPRI: 00000000
[    3.720000] ... APIC LDR: 02000000
[    3.720000] ... APIC DFR: ffffffff
[    3.720000] ... APIC SPIV: 000001ff
[    3.720000] ... APIC ISR field:
[    3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[    3.720000] ... APIC TMR field:
[    3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[    3.720000] ... APIC IRR field:
[    3.720000] 0000000000010000000000000000000000000000000000000000000000000000
[    3.720000] ... APIC ESR: 00000000
[    3.720000] ... APIC ICR: 000008ef
[    3.720000] ... APIC ICR2: 01000000
[    3.720000] ... APIC LVTT: 00010000
[    3.720000] ... APIC LVTPC: 00010000
[    3.720000] ... APIC LVT0: 00010700
[    3.720000] ... APIC LVT1: 00010400
[    3.720000] ... APIC LVTERR: 000000fe
[    3.720000] ... APIC TMICT: 00000000
[    3.720000] ... APIC TMCCT: 00000000
[    3.720000] ... APIC TDCR: 00000000
[    3.720000] 
[    3.730000] number of MP IRQ sources: 17.
[    3.730003] number of IO-APIC #2 registers: 24.
[    3.734528] testing the IO APIC.......................
[    3.740005] 
[    3.741497] IO APIC #2......
[    3.744374] .... register #00: 00000000
[    3.750002] .......    : physical APIC id: 00
[    3.754355] .......    : Delivery Type: 0
[    3.760024] .......    : LTS          : 0
[    3.764026] .... register #01: 00170011
[    3.767854] .......     : max redirection entries: 0017
[    3.770002] .......     : PRQ implemented: 0
[    3.774268] .......     : IO APIC version: 0011
[    3.780002] .... register #02: 00000000
[    3.783836] .......     : arbitration: 00
[    3.780005] Clocksource tsc unstable (delta = 208562563 ns)
[    3.790002] .... IRQ redirection table:
[    3.793836]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
[    3.800019]  00 003 0    0    0   0   0    1    1    30
[    3.810004]  01 003 0    0    0   0   0    1    1    31
[    3.815239]  02 000 1    0    0   0   0    0    0    00
[    3.820004]  03 003 1    1    0   1   0    1    1    33
[    3.825250]  04 003 0    0    0   0   0    1    1    34
[    3.830004]  05 003 1    1    0   1   0    1    1    35
[    3.835239]  06 003 0    0    0   0   0    1    1    36
[    3.840019]  07 003 1    0    0   0   0    1    1    37
[    3.845265]  08 003 0    0    0   0   0    1    1    38
[    3.850004]  09 003 0    0    0   0   0    1    1    39
[    3.855250]  0a 003 0    0    0   0   0    1    1    3A
[    3.863230]  0b 003 1    1    0   1   0    1    1    3B
[    3.868470]  0c 003 0    0    0   0   0    1    1    3C
[    3.873232]  0d 003 0    0    0   0   0    1    1    3D
[    3.878469]  0e 003 0    0    0   0   0    1    1    3E
[    3.883249]  0f 003 0    0    0   0   0    1    1    3F
[    3.888498]  10 000 1    0    0   0   0    0    0    00
[    3.893230]  11 000 1    0    0   0   0    0    0    00
[    3.900004]  12 000 1    0    0   0   0    0    0    00
[    3.905250]  13 000 1    0    0   0   0    0    0    00
[    3.910004]  14 000 1    0    0   0   0    0    0    00
[    3.915239]  15 000 1    0    0   0   0    0    0    00
[    3.920019]  16 000 1    0    0   0   0    0    0    00
[    3.925267]  17 000 1    0    0   0   0    0    0    00
[    3.930002] IRQ to pin mappings:
[    3.933228] IRQ0 -> 0:0
[    3.935704] IRQ1 -> 0:1
[    3.938183] IRQ3 -> 0:3
[    3.940735] IRQ4 -> 0:4
[    3.943211] IRQ5 -> 0:5
[    3.945689] IRQ6 -> 0:6
[    3.948166] IRQ7 -> 0:7
[    3.950735] IRQ8 -> 0:8
[    3.953211] IRQ9 -> 0:9
[    3.955687] IRQ10 -> 0:10
[    3.958338] IRQ11 -> 0:11
[    3.960837] IRQ12 -> 0:12
[    3.963488] IRQ13 -> 0:13
[    3.966139] IRQ14 -> 0:14
[    3.970198] IRQ15 -> 0:15
[    3.972853] .................................... done.
[    3.977986] initcall print_all_ICs+0x0/0x5a1 returned 0 after 263671 usecs
[    3.980004] calling  hpet_late_init+0x0/0x91 @ 1
[    3.984619] initcall hpet_late_init+0x0/0x91 returned -19 after 0 usecs
[    3.990004] calling  clocksource_done_booting+0x0/0x37 @ 1
[    4.000019] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs
[    4.007318] calling  ftrace_init_debugfs+0x0/0x1ad @ 1
[    4.010093] initcall ftrace_init_debugfs+0x0/0x1ad returned 0 after 0 usecs
[    4.020006] calling  rb_init_debugfs+0x0/0x56 @ 1
[    4.024709] initcall rb_init_debugfs+0x0/0x56 returned 0 after 0 usecs
[    4.030003] calling  tracer_init_debugfs+0x0/0x32e @ 1
[    4.035550] initcall tracer_init_debugfs+0x0/0x32e returned 0 after 0 usecs
[    4.040020] calling  init_trace_printk_function_export+0x0/0x56 @ 1
[    4.050011] initcall init_trace_printk_function_export+0x0/0x56 returned 0 after 0 usecs
[    4.058089] calling  stat_workqueue_init+0x0/0x54 @ 1
[    4.060013] initcall stat_workqueue_init+0x0/0x54 returned 0 after 0 usecs
[    4.070003] calling  event_trace_init+0x0/0x49c @ 1
[    4.089466] initcall event_trace_init+0x0/0x49c returned 0 after 9765 usecs
[    4.090012] calling  ksym_tracer_stat_init+0x0/0x54 @ 1
[    4.100016] initcall ksym_tracer_stat_init+0x0/0x54 returned 0 after 0 usecs
[    4.107057] calling  init_pipe_fs+0x0/0x72 @ 1
[    4.110092] initcall init_pipe_fs+0x0/0x72 returned 0 after 0 usecs
[    4.116348] calling  eventpoll_init+0x0/0x102 @ 1
[    4.120159] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs
[    4.130004] calling  anon_inode_init+0x0/0x15c @ 1
[    4.134855] initcall anon_inode_init+0x0/0x15c returned 0 after 0 usecs
[    4.140005] calling  fscache_init+0x0/0xd1 @ 1
[    4.144450] Slow work thread pool: Starting up
[    4.150229] Slow work thread pool: Ready
[    4.154219] FS-Cache: Loaded
[    4.157102] initcall fscache_init+0x0/0xd1 returned 0 after 9765 usecs
[    4.160023] calling  tomoyo_initerface_init+0x0/0x181 @ 1
[    4.170131] initcall tomoyo_initerface_init+0x0/0x181 returned 0 after 0 usecs
[    4.177345] calling  blk_scsi_ioctl_init+0x0/0x2ad @ 1
[    4.180005] initcall blk_scsi_ioctl_init+0x0/0x2ad returned 0 after 0 usecs
[    4.186961] calling  chr_dev_init+0x0/0xca @ 1
[    4.190018] device class 'mem': registering
[    4.194441] device: 'mem': device_add
[    4.200283] device: 'kmem': device_add
[    4.204248] device: 'null': device_add
[    4.210252] device: 'port': device_add
[    4.214222] device: 'zero': device_add
[    4.218226] device: 'full': device_add
[    4.220239] device: 'random': device_add
[    4.224421] device: 'urandom': device_add
[    4.230221] device: 'kmsg': device_add
[    4.234229] initcall chr_dev_init+0x0/0xca returned 0 after 39062 usecs
[    4.240005] calling  firmware_class_init+0x0/0x9f @ 1
[    4.245048] device class 'firmware': registering
[    4.250216] initcall firmware_class_init+0x0/0x9f returned 0 after 9765 usecs
[    4.257345] calling  ieee1394_init+0x0/0x289 @ 1
[    4.260412] bus: 'ieee1394': registered
[    4.264248] device class 'ieee1394_host': registering
[    4.270211] device class 'ieee1394_protocol': registering
[    4.275845] device class 'ieee1394_node': registering
[    4.280263] device class 'ieee1394': registering
[    4.285076] bus: 'ieee1394': add driver nodemgr
[    4.290217] initcall ieee1394_init+0x0/0x289 returned 0 after 29296 usecs
[    4.300005] calling  cpufreq_gov_performance_init+0x0/0x39 @ 1
[    4.305838] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs
[    4.310004] calling  cpufreq_gov_dbs_init+0x0/0x8e @ 1
[    4.315349] initcall cpufreq_gov_dbs_init+0x0/0x8e returned 0 after 0 usecs
[    4.320005] calling  ssb_modinit+0x0/0x9b @ 1
[    4.330253] bus: 'ssb': registered
[    4.333666] initcall ssb_modinit+0x0/0x9b returned 0 after 0 usecs
[    4.340006] calling  pcibios_assign_resources+0x0/0x9a @ 1
[    4.345624] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[    4.350004] pci 0000:00:09.0:   IO window: 0xc000-0xcfff
[    4.355310] pci 0000:00:09.0:   MEM window: 0xda000000-0xda0fffff
[    4.360004] pci 0000:00:09.0:   PREFETCH window: disabled
[    4.365397] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[    4.370002] pci 0000:00:0b.0:   IO window: disabled
[    4.374876] pci 0000:00:0b.0:   MEM window: disabled
[    4.380026] pci 0000:00:0b.0:   PREFETCH window: disabled
[    4.385421] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[    4.390002] pci 0000:00:0c.0:   IO window: disabled
[    4.400004] pci 0000:00:0c.0:   MEM window: disabled
[    4.404961] pci 0000:00:0c.0:   PREFETCH window: disabled
[    4.410004] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[    4.415912] pci 0000:00:0d.0:   IO window: disabled
[    4.420019] pci 0000:00:0d.0:   MEM window: disabled
[    4.424979] pci 0000:00:0d.0:   PREFETCH window: disabled
[    4.430010] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200
[    4.440006] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[    4.445922] pci 0000:00:0e.0:   IO window: 0xb000-0xbfff
[    4.450005] pci 0000:00:0e.0:   MEM window: 0xd8000000-0xd9ffffff
[    4.456088] pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[    4.460027] pci 0000:00:09.0: setting latency timer to 64
[    4.470008] pci 0000:00:0b.0: setting latency timer to 64
[    4.475407] pci 0000:00:0c.0: setting latency timer to 64
[    4.480007] pci 0000:00:0d.0: setting latency timer to 64
[    4.485406] pci 0000:00:0e.0: setting latency timer to 64
[    4.490005] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    4.495482] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    4.500018] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    4.510003] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff]
[    4.516348] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    4.520003] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[    4.530004] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    4.535653] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff]
[    4.540021] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[    4.546711] initcall pcibios_assign_resources+0x0/0x9a returned 0 after 195312 usecs
[    4.550004] calling  sysctl_core_init+0x0/0x5f @ 1
[    4.560056] initcall sysctl_core_init+0x0/0x5f returned 0 after 0 usecs
[    4.566659] calling  inet_init+0x0/0x231 @ 1
[    4.570263] NET: Registered protocol family 2
[    4.575033] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    4.582295] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    4.592850] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    4.603425] TCP: Hash tables configured (established 131072 bind 65536)
[    4.610046] TCP reno registered
[    4.613592] initcall inet_init+0x0/0x231 returned 0 after 39062 usecs
[    4.620026] calling  af_unix_init+0x0/0x7b @ 1
[    4.624506] NET: Registered protocol family 1
[    4.630033] initcall af_unix_init+0x0/0x7b returned 0 after 9765 usecs
[    4.636550] calling  populate_rootfs+0x0/0x131 @ 1
[    4.640583] initcall populate_rootfs+0x0/0x131 returned 0 after 0 usecs
[    4.650005] calling  svm_init+0x0/0x40 @ 1
[    4.654363] has_svm: svm not available
[    4.658113] kvm: no hardware support
[    4.660022] initcall svm_init+0x0/0x40 returned -95 after 9765 usecs
[    4.666364] initcall svm_init+0x0/0x40 returned with error code -95 
[    4.670004] calling  i8259A_init_sysfs+0x0/0x49 @ 1
[    4.680003] Registering sysdev class 'i8259'
[    4.684550] Registering sys device of class 'i8259'
[    4.690025] Registering sys device 'i82590'
[    4.694441] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 9765 usecs
[    4.700010] calling  vsyscall_init+0x0/0x60 @ 1
[    4.704560] initcall vsyscall_init+0x0/0x60 returned 0 after 0 usecs
[    4.710004] calling  sbf_init+0x0/0x118 @ 1
[    4.714183] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs
[    4.720004] calling  i8237A_init_sysfs+0x0/0x49 @ 1
[    4.724876] Registering sysdev class 'i8237'
[    4.730209] Registering sys device of class 'i8237'
[    4.735087] Registering sys device 'i82370'
[    4.740251] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 19531 usecs
[    4.747291] calling  add_rtc_cmos+0x0/0x68 @ 1
[    4.750008] Registering platform device 'rtc_cmos'. Parent at platform
[    4.756531] device: 'rtc_cmos': device_add
[    4.760023] bus: 'platform': add device rtc_cmos
[    4.764853] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    4.770005] initcall add_rtc_cmos+0x0/0x68 returned 0 after 19531 usecs
[    4.780005] calling  cache_sysfs_init+0x0/0x323 @ 1
[    4.786815] initcall cache_sysfs_init+0x0/0x323 returned 0 after 0 usecs
[    4.790005] calling  cpu_debug_init+0x0/0x2de @ 1
[    4.802659] cpu0(2) debug files 137
[    4.810500] cpu1(2) debug files 137
[    4.813997] initcall cpu_debug_init+0x0/0x2de returned 0 after 9765 usecs
[    4.820004] calling  mce_init_device+0x0/0x2ed @ 1
[    4.824794] Registering sysdev class 'machinecheck'
[    4.830276] Registering sys device of class 'machinecheck'
[    4.835763] Registering sys device 'machinecheck0'
[    4.840257] Registering sys device of class 'machinecheck'
[    4.845736] Registering sys device 'machinecheck1'
[    4.850292] device: 'mcelog': device_add
[    4.854442] initcall mce_init_device+0x0/0x2ed returned 0 after 29296 usecs
[    4.860005] calling  threshold_init_device+0x0/0xc0 @ 1
[    4.865221] initcall threshold_init_device+0x0/0xc0 returned 0 after 0 usecs
[    4.870005] calling  inject_init+0x0/0x4b @ 1
[    4.874356] Machine check injector initialized
[    4.880004] initcall inject_init+0x0/0x4b returned 0 after 9765 usecs
[    4.890003] calling  msr_init+0x0/0x15c @ 1
[    4.894192] device class 'msr': registering
[    4.898590] device: 'msr0': device_add
[    4.900369] device: 'msr1': device_add
[    4.904340] initcall msr_init+0x0/0x15c returned 0 after 9765 usecs
[    4.910005] calling  ioapic_init_sysfs+0x0/0xd2 @ 1
[    4.914875] Registering sysdev class 'ioapic'
[    4.920224] Registering sys device of class 'ioapic'
[    4.925192] Registering sys device 'ioapic0'
[    4.930264] initcall ioapic_init_sysfs+0x0/0xd2 returned 0 after 19531 usecs
[    4.937300] calling  add_pcspkr+0x0/0x4f @ 1
[    4.940008] Registering platform device 'pcspkr'. Parent at platform
[    4.950004] device: 'pcspkr': device_add
[    4.953930] bus: 'platform': add device pcspkr
[    4.958586] initcall add_pcspkr+0x0/0x4f returned 0 after 9765 usecs
[    4.960006] calling  start_periodic_check_for_corruption+0x0/0x61 @ 1
[    4.970003] Scanning for low memory corruption every 60 seconds
[    4.975919] initcall start_periodic_check_for_corruption+0x0/0x61 returned 0 after 0 usecs
[    4.980005] calling  start_pageattr_test+0x0/0x6c @ 1
[    4.990099] initcall start_pageattr_test+0x0/0x6c returned 0 after 0 usecs
[    4.996963] calling  pt_dump_init+0x0/0x57 @ 1
[    5.000039] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs
[    5.006296] calling  crypto_fpu_module_init+0x0/0x39 @ 1
[    5.010041] initcall crypto_fpu_module_init+0x0/0x39 returned 0 after 0 usecs
[    5.020004] calling  aes_init+0x0/0x39 @ 1
[    5.024340] initcall aes_init+0x0/0x39 returned 0 after 0 usecs
[    5.030005] calling  init+0x0/0x39 @ 1
[    5.034148] initcall init+0x0/0x39 returned 0 after 0 usecs
[    5.040004] calling  init+0x0/0x39 @ 1
[    5.043852] initcall init+0x0/0x39 returned 0 after 0 usecs
[    5.050029] calling  aesni_init+0x0/0x166 @ 1
[    5.054379] Intel AES-NI instructions are not detected.
[    5.059603] initcall aesni_init+0x0/0x166 returned -19 after 0 usecs
[    5.060008] calling  crc32c_intel_mod_init+0x0/0x47 @ 1
[    5.070004] initcall crc32c_intel_mod_init+0x0/0x47 returned -19 after 0 usecs
[    5.077214] calling  init_vdso_vars+0x0/0x245 @ 1
[    5.080025] initcall init_vdso_vars+0x0/0x245 returned 0 after 0 usecs
[    5.086546] calling  ia32_binfmt_init+0x0/0x3b @ 1
[    5.090049] initcall ia32_binfmt_init+0x0/0x3b returned 0 after 0 usecs
[    5.100004] calling  sysenter_setup+0x0/0x304 @ 1
[    5.104711] initcall sysenter_setup+0x0/0x304 returned 0 after 0 usecs
[    5.110004] calling  init_aout_binfmt+0x0/0x3b @ 1
[    5.114791] initcall init_aout_binfmt+0x0/0x3b returned 0 after 0 usecs
[    5.120004] calling  init_sched_debug_procfs+0x0/0x53 @ 1
[    5.125409] initcall init_sched_debug_procfs+0x0/0x53 returned 0 after 0 usecs
[    5.130019] calling  proc_schedstat_init+0x0/0x49 @ 1
[    5.140012] initcall proc_schedstat_init+0x0/0x49 returned 0 after 0 usecs
[    5.146877] calling  proc_execdomains_init+0x0/0x49 @ 1
[    5.150012] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs
[    5.160004] calling  ioresources_init+0x0/0x63 @ 1
[    5.164804] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs
[    5.170019] calling  uid_cache_init+0x0/0xb4 @ 1
[    5.174691] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs
[    5.180004] calling  init_posix_timers+0x0/0x103 @ 1
[    5.185004] initcall init_posix_timers+0x0/0x103 returned 0 after 0 usecs
[    5.190003] calling  init_posix_cpu_timers+0x0/0xd6 @ 1
[    5.200004] initcall init_posix_cpu_timers+0x0/0xd6 returned 0 after 0 usecs
[    5.207040] calling  nsproxy_cache_init+0x0/0x54 @ 1
[    5.210059] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs
[    5.216842] calling  create_proc_profile+0x0/0x2a0 @ 1
[    5.220004] initcall create_proc_profile+0x0/0x2a0 returned 0 after 0 usecs
[    5.230003] calling  timekeeping_init_device+0x0/0x49 @ 1
[    5.235395] Registering sysdev class 'timekeeping'
[    5.240237] Registering sys device of class 'timekeeping'
[    5.245633] Registering sys device 'timekeeping0'
[    5.250281] initcall timekeeping_init_device+0x0/0x49 returned 0 after 19531 usecs
[    5.257836] calling  init_clocksource_sysfs+0x0/0x77 @ 1
[    5.260003] Registering sysdev class 'clocksource'
[    5.270153] Registering sys device of class 'clocksource'
[    5.275549] Registering sys device 'clocksource0'
[    5.280229] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 19531 usecs
[    5.287699] calling  init_timer_list_procfs+0x0/0x53 @ 1
[    5.290041] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs
[    5.300003] calling  lockdep_proc_init+0x0/0x69 @ 1
[    5.304900] initcall lockdep_proc_init+0x0/0x69 returned 0 after 0 usecs
[    5.310003] calling  futex_init+0x0/0xac @ 1
[    5.314289] initcall futex_init+0x0/0xac returned 0 after 0 usecs
[    5.320006] calling  proc_dma_init+0x0/0x49 @ 1
[    5.324545] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs
[    5.330019] calling  kallsyms_init+0x0/0x4c @ 1
[    5.334554] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs
[    5.340003] calling  crash_save_vmcoreinfo_init+0x0/0x492 @ 1
[    5.350032] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 0 usecs
[    5.357593] calling  crash_notes_memory_init+0x0/0x5f @ 1
[    5.360009] initcall crash_notes_memory_init+0x0/0x5f returned 0 after 0 usecs
[    5.370020] calling  backtrace_regression_test+0x0/0x11f @ 1
[    5.375671] ====[ backtrace testing ]===========
[    5.380002] Testing a backtrace from process context.
[    5.385046] The following trace is a kernel self test and not a bug!
[    5.390004] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    5.396866] Call Trace:
[    5.400006]  [<ffffffff810b3619>] ? backtrace_regression_test+0x0/0x11f
[    5.406608]  [<ffffffff810b3663>] backtrace_regression_test+0x4a/0x11f
[    5.410020]  [<ffffffff810a3721>] ? jiffies_read+0xd/0x3c
[    5.415414]  [<ffffffff810a1f2a>] ? ktime_get+0x77/0xea
[    5.420004]  [<ffffffff810b3619>] ? backtrace_regression_test+0x0/0x11f
[    5.430006]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    5.435658]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    5.440006]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    5.446091]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    5.450020]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.460004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.465742]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    5.470006]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    5.475484]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.480004]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    5.485395]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    5.490019]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    5.500004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    5.505916]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    5.510005]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    5.515397]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    5.520005]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    5.525395]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    5.530017] Testing a backtrace from irq context.
[    5.534717] The following trace is a kernel self test and not a bug!
[    5.540011] Pid: 4, comm: ksoftirqd/0 Tainted: G        W  2.6.31-rc5-tip #291
[    5.550001] Call Trace:
[    5.552449]  <IRQ>  [<ffffffff810b35f7>] backtrace_test_irq_callback+0x21/0x43
[    5.560004]  [<ffffffff810818dd>] tasklet_action+0x91/0xff
[    5.565484]  [<ffffffff8102f44c>] ? call_softirq+0x1c/0x28
[    5.570004]  [<ffffffff8108312a>] __do_softirq+0x12c/0x24b
[    5.575482]  [<ffffffff810827ac>] ? ksoftirqd+0x0/0x1c9
[    5.580003]  [<ffffffff8102f44c>] call_softirq+0x1c/0x28
[    5.585307]  <EOI>  [<ffffffff8103177a>] do_softirq+0x56/0xb3
[    5.590003]  [<ffffffff81082857>] ksoftirqd+0xab/0x1c9
[    5.595135]  [<ffffffff81096e4e>] kthread+0x9c/0xa4
[    5.600003]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    5.604962]  [<ffffffff81096db2>] ? kthread+0x0/0xa4
[    5.610003]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    5.615282] Testing a saved backtrace.
[    5.620019] The following trace is a kernel self test and not a bug!
[    5.626367]  [<ffffffff8103bcb7>] save_stack_trace+0x3e/0x73
[    5.634268]  [<ffffffff810b3701>] backtrace_regression_test+0xe8/0x11f
[    5.640002]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    5.645679]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    5.650002]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    5.654980]  [<ffffffffffffffff>] 0xffffffffffffffff
[    5.660017] ====[ end of backtrace testing ]====
[    5.664634] initcall backtrace_regression_test+0x0/0x11f returned 0 after 283203 usecs
[    5.670003] calling  hung_task_init+0x0/0x79 @ 1
[    5.674698] initcall hung_task_init+0x0/0x79 returned 0 after 0 usecs
[    5.680021] calling  rcu_torture_init+0x0/0x6ef @ 1
[    5.690024] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
[    5.701021] initcall rcu_torture_init+0x0/0x6ef returned 0 after 9765 usecs
[    5.710007] calling  utsname_sysctl_init+0x0/0x3b @ 1
[    5.715072] sysctl table check failed: /kernel/ostype .1.1 No proc_handler
[    5.723317] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    5.730002] Call Trace:
[    5.732452]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    5.737416]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    5.740004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    5.750028]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    5.756547]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    5.760004]  [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[    5.766002]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    5.770004]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    5.780004]  [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[    5.785916]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    5.790020]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    5.795586]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    5.800005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    5.810004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.815742]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.820005]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    5.826004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    5.830019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.835759]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    5.840004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    5.850004]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    5.855917]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    5.860005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    5.865311]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    5.870021]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    5.874981]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    5.880004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    5.885141] sysctl table check failed: /kernel/osrelease .1.2 No proc_handler
[    5.893577] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    5.900002] Call Trace:
[    5.902450]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    5.910019]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    5.916019]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    5.920005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    5.926522]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    5.930004]  [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[    5.940005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    5.946089]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    5.950019]  [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[    5.955933]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    5.960005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    5.970004]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    5.976089]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    5.980004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.985741]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    5.990019]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    6.000004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    6.005482]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.010004]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    6.015395]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    6.020004]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    6.025916]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    6.030020]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    6.040005]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    6.045395]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    6.050008]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    6.055405]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    6.060009] sysctl table check failed: /kernel/version .1.4 No proc_handler
[    6.067066] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    6.070017] Call Trace:
[    6.072469]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    6.080004]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    6.086002]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    6.090005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    6.100005]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    6.106434]  [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[    6.110020]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    6.116107]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    6.120004]  [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[    6.130006]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    6.135657]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    6.140005]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    6.146089]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    6.150019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.160004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.165743]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    6.170004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    6.175481]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.180004]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    6.185396]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    6.190019]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    6.200004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    6.205916]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    6.210005]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    6.215397]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    6.220005]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    6.225395]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    6.230024] sysctl table check failed: /kernel/hostname .1.7 No proc_handler
[    6.237169] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    6.240002] Call Trace:
[    6.242452]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    6.250004]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    6.260004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    6.266003]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    6.270019]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    6.276453]  [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[    6.280005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    6.290005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    6.296089]  [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[    6.300004]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    6.305656]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    6.310019]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    6.320005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    6.325830]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.330004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.335743]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    6.340004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    6.345481]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.350019]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    6.360004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    6.365740]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    6.370004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    6.375918]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    6.380005]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    6.385396]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    6.390021]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    6.395412]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    6.400009] sysctl table check failed: /kernel/domainname .1.8 No proc_handler
[    6.410003] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    6.416865] Call Trace:
[    6.420004]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    6.424962]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    6.430019]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    6.436019]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    6.440005]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    6.450004]  [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[    6.456002]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    6.460005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    6.466089]  [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[    6.470019]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    6.480005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    6.485569]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    6.490005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    6.495830]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.500004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.505742]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    6.510019]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    6.520004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    6.525743]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    6.530004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    6.535742]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    6.540004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    6.545916]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    6.550020]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    6.560004]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    6.564962]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    6.570004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    6.575138] initcall utsname_sysctl_init+0x0/0x3b returned 0 after 839843 usecs
[    6.580003] calling  init_lstats_procfs+0x0/0x4c @ 1
[    6.584973] initcall init_lstats_procfs+0x0/0x4c returned 0 after 0 usecs
[    6.590018] calling  ftrace_nodyn_init+0x0/0x37 @ 1
[    6.600004] initcall ftrace_nodyn_init+0x0/0x37 returned 0 after 0 usecs
[    6.606694] calling  init_events+0x0/0x8c @ 1
[    6.610010] initcall init_events+0x0/0x8c returned 0 after 0 usecs
[    6.616183] calling  init_sched_switch_trace+0x0/0x39 @ 1
[    6.620007] initcall init_sched_switch_trace+0x0/0x39 returned 0 after 0 usecs
[    6.627222] calling  init_stack_trace+0x0/0x39 @ 1
[    6.630021] initcall init_stack_trace+0x0/0x39 returned 0 after 0 usecs
[    6.640003] calling  init_function_trace+0x0/0x39 @ 1
[    6.645050] initcall init_function_trace+0x0/0x39 returned 0 after 0 usecs
[    6.650005] calling  init_wakeup_tracer+0x0/0x49 @ 1
[    6.654963] initcall init_wakeup_tracer+0x0/0x49 returned 0 after 0 usecs
[    6.660003] calling  stack_trace_init+0x0/0x91 @ 1
[    6.664810] initcall stack_trace_init+0x0/0x91 returned 0 after 0 usecs
[    6.670025] calling  init_mmio_trace+0x0/0x39 @ 1
[    6.680006] initcall init_mmio_trace+0x0/0x39 returned 0 after 0 usecs
[    6.686521] calling  init_power_trace+0x0/0x39 @ 1
[    6.690005] initcall init_power_trace+0x0/0x39 returned 0 after 0 usecs
[    6.696607] calling  init_kmem_tracer+0x0/0x7d @ 1
[    6.700004] Warning: could not register the kmem tracer
[    6.705222] initcall init_kmem_tracer+0x0/0x7d returned 1 after 0 usecs
[    6.710004] initcall init_kmem_tracer+0x0/0x7d returned with error code 1 
[    6.720004] calling  init_blk_tracer+0x0/0x7e @ 1
[    6.724702] initcall init_blk_tracer+0x0/0x7e returned 0 after 0 usecs
[    6.730025] calling  register_ftrace_syscalls+0x0/0xc5 @ 1
[    6.735512] initcall register_ftrace_syscalls+0x0/0xc5 returned 0 after 0 usecs
[    6.740004] calling  init_ksym_trace+0x0/0x76 @ 1
[    6.750012] initcall init_ksym_trace+0x0/0x76 returned 0 after 0 usecs
[    6.756532] calling  init_per_zone_wmark_min+0x0/0x8d @ 1
[    6.760070] initcall init_per_zone_wmark_min+0x0/0x8d returned 0 after 0 usecs
[    6.770003] calling  pdflush_init+0x0/0x43 @ 1
[    6.774705] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs
[    6.780026] calling  kswapd_init+0x0/0x97 @ 1
[    6.784508] initcall kswapd_init+0x0/0x97 returned 0 after 0 usecs
[    6.790004] calling  init_tmpfs+0x0/0x64 @ 1
[    6.794339] initcall init_tmpfs+0x0/0x64 returned 0 after 0 usecs
[    6.800005] calling  setup_vmstat+0x0/0xf0 @ 1
[    6.804482] initcall setup_vmstat+0x0/0xf0 returned 0 after 0 usecs
[    6.810004] calling  mm_sysfs_init+0x0/0x50 @ 1
[    6.814540] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[    6.820027] calling  proc_vmalloc_init+0x0/0x4c @ 1
[    6.824909] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs
[    6.830004] calling  procswaps_init+0x0/0x49 @ 1
[    6.840012] initcall procswaps_init+0x0/0x49 returned 0 after 0 usecs
[    6.846443] calling  hugetlb_init+0x0/0x3cc @ 1
[    6.850008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    6.856381] initcall hugetlb_init+0x0/0x3cc returned 0 after 0 usecs
[    6.860019] calling  slab_proc_init+0x0/0x4c @ 1
[    6.864643] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs
[    6.870004] calling  slab_sysfs_init+0x0/0x119 @ 1
[    6.954616] initcall slab_sysfs_init+0x0/0x119 returned 0 after 68359 usecs
[    6.960110] calling  fasync_init+0x0/0x51 @ 1
[    6.975420] initcall fasync_init+0x0/0x51 returned 0 after 9765 usecs
[    6.980132] calling  proc_filesystems_init+0x0/0x49 @ 1
[    6.985369] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs
[    6.990005] calling  dnotify_init+0x0/0xa7 @ 1
[    7.005625] initcall dnotify_init+0x0/0xa7 returned 0 after 9765 usecs
[    7.010026] calling  inotify_setup+0x0/0x37 @ 1
[    7.014554] initcall inotify_setup+0x0/0x37 returned 0 after 0 usecs
[    7.020004] calling  aio_setup+0x0/0x9c @ 1
[    7.050095] initcall aio_setup+0x0/0x9c returned 0 after 29296 usecs
[    7.056443] calling  proc_locks_init+0x0/0x49 @ 1
[    7.060037] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs
[    7.066555] calling  init_sys32_ioctl+0x0/0xac @ 1
[    7.070019] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs
[    7.076625] calling  init_mbcache+0x0/0x3b @ 1
[    7.080005] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs
[    7.086262] calling  dquot_init+0x0/0x12a @ 1
[    7.090002] VFS: Disk quotas dquot_6.5.2
[    7.104868] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    7.110065] initcall dquot_init+0x0/0x12a returned 0 after 19531 usecs
[    7.116581] calling  init_v1_quota_format+0x0/0x39 @ 1
[    7.120005] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs
[    7.126954] calling  proc_cmdline_init+0x0/0x49 @ 1
[    7.130014] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs
[    7.140004] calling  proc_cpuinfo_init+0x0/0x49 @ 1
[    7.144883] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs
[    7.150019] calling  proc_devices_init+0x0/0x49 @ 1
[    7.154902] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs
[    7.160004] calling  proc_interrupts_init+0x0/0x49 @ 1
[    7.165143] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs
[    7.170009] calling  proc_loadavg_init+0x0/0x49 @ 1
[    7.180012] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs
[    7.186702] calling  proc_meminfo_init+0x0/0x49 @ 1
[    7.190027] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs
[    7.200004] calling  proc_stat_init+0x0/0x49 @ 1
[    7.204623] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs
[    7.210004] calling  proc_uptime_init+0x0/0x49 @ 1
[    7.214798] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs
[    7.220004] calling  proc_version_init+0x0/0x49 @ 1
[    7.224884] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs
[    7.230019] calling  proc_softirqs_init+0x0/0x49 @ 1
[    7.234988] initcall proc_softirqs_init+0x0/0x49 returned 0 after 0 usecs
[    7.240004] calling  proc_kcore_init+0x0/0x70 @ 1
[    7.250021] initcall proc_kcore_init+0x0/0x70 returned 0 after 0 usecs
[    7.256537] calling  proc_kmsg_init+0x0/0x4c @ 1
[    7.260012] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs
[    7.266443] calling  proc_page_init+0x0/0x69 @ 1
[    7.270034] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs
[    7.276470] calling  configfs_init+0x0/0xfb @ 1
[    7.291246] initcall configfs_init+0x0/0xfb returned 0 after 9765 usecs
[    7.297849] calling  init_devpts_fs+0x0/0x72 @ 1
[    7.300135] initcall init_devpts_fs+0x0/0x72 returned 0 after 0 usecs
[    7.306564] calling  init_dlm+0x0/0xae @ 1
[    7.321364] device: 'dlm-control': device_add
[    7.325982] device: 'dlm-monitor': device_add
[    7.342388] device: 'dlm_plock': device_add
[    7.346791] DLM (built Aug  2 2009 22:49:30) installed
[    7.350027] initcall init_dlm+0x0/0xae returned 0 after 39062 usecs
[    7.356286] calling  init_reiserfs_fs+0x0/0xb2 @ 1
[    7.371489] initcall init_reiserfs_fs+0x0/0xb2 returned 0 after 9765 usecs
[    7.378352] calling  init_ext3_fs+0x0/0x99 @ 1
[    7.391644] initcall init_ext3_fs+0x0/0x99 returned 0 after 9765 usecs
[    7.398165] calling  init_ext2_fs+0x0/0x99 @ 1
[    7.411883] initcall init_ext2_fs+0x0/0x99 returned 0 after 9765 usecs
[    7.418400] calling  init_ext4_fs+0x0/0x111 @ 1
[    7.433538] initcall init_ext4_fs+0x0/0x111 returned 0 after 9765 usecs
[    7.440031] calling  journal_init+0x0/0xf5 @ 1
[    7.456339] initcall journal_init+0x0/0xf5 returned 0 after 9765 usecs
[    7.460030] calling  journal_init+0x0/0xd6 @ 1
[    7.476480] initcall journal_init+0x0/0xd6 returned 0 after 9765 usecs
[    7.480028] calling  init_cramfs_fs+0x0/0x57 @ 1
[    7.484673] initcall init_cramfs_fs+0x0/0x57 returned 0 after 0 usecs
[    7.490005] calling  init_ramfs_fs+0x0/0x39 @ 1
[    7.494532] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs
[    7.500004] calling  init_hugetlbfs_fs+0x0/0xbe @ 1
[    7.521169] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 19531 usecs
[    7.528214] calling  init_fat_fs+0x0/0x75 @ 1
[    7.541176] initcall init_fat_fs+0x0/0x75 returned 0 after 9765 usecs
[    7.547609] calling  init_msdos_fs+0x0/0x39 @ 1
[    7.550029] initcall init_msdos_fs+0x0/0x39 returned 0 after 0 usecs
[    7.556372] calling  init_bfs_fs+0x0/0x89 @ 1
[    7.571734] initcall init_bfs_fs+0x0/0x89 returned 0 after 9765 usecs
[    7.578168] calling  init_iso9660_fs+0x0/0x89 @ 1
[    7.590952] initcall init_iso9660_fs+0x0/0x89 returned 0 after 9765 usecs
[    7.597727] calling  init_hfs_fs+0x0/0x83 @ 1
[    7.610719] initcall init_hfs_fs+0x0/0x83 returned 0 after 9765 usecs
[    7.617150] calling  ecryptfs_init+0x0/0x220 @ 1
[    7.636642] device: 'ecryptfs': device_add
[    7.640288] initcall ecryptfs_init+0x0/0x220 returned 0 after 19531 usecs
[    7.647067] calling  init_nls_cp437+0x0/0x39 @ 1
[    7.650838] initcall init_nls_cp437+0x0/0x39 returned 0 after 0 usecs
[    7.657273] calling  init_nls_cp737+0x0/0x39 @ 1
[    7.660005] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs
[    7.670003] calling  init_nls_cp775+0x0/0x39 @ 1
[    7.674616] initcall init_nls_cp775+0x0/0x39 returned 0 after 0 usecs
[    7.680003] calling  init_nls_cp850+0x0/0x39 @ 1
[    7.684615] initcall init_nls_cp850+0x0/0x39 returned 0 after 0 usecs
[    7.690028] calling  init_nls_cp852+0x0/0x39 @ 1
[    7.694643] initcall init_nls_cp852+0x0/0x39 returned 0 after 0 usecs
[    7.700003] calling  init_nls_cp857+0x0/0x39 @ 1
[    7.704616] initcall init_nls_cp857+0x0/0x39 returned 0 after 0 usecs
[    7.710003] calling  init_nls_cp861+0x0/0x39 @ 1
[    7.714616] initcall init_nls_cp861+0x0/0x39 returned 0 after 0 usecs
[    7.720003] calling  init_nls_cp862+0x0/0x39 @ 1
[    7.730019] initcall init_nls_cp862+0x0/0x39 returned 0 after 0 usecs
[    7.736451] calling  init_nls_cp863+0x0/0x39 @ 1
[    7.740004] initcall init_nls_cp863+0x0/0x39 returned 0 after 0 usecs
[    7.746432] calling  init_nls_cp874+0x0/0x39 @ 1
[    7.750004] initcall init_nls_cp874+0x0/0x39 returned 0 after 0 usecs
[    7.756435] calling  init_nls_cp932+0x0/0x39 @ 1
[    7.760004] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs
[    7.770018] calling  init_nls_euc_jp+0x0/0x6f @ 1
[    7.774721] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs
[    7.780003] calling  init_nls_cp936+0x0/0x39 @ 1
[    7.784616] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs
[    7.790003] calling  init_nls_cp949+0x0/0x39 @ 1
[    7.794616] initcall init_nls_cp949+0x0/0x39 returned 0 after 0 usecs
[    7.800003] calling  init_nls_cp950+0x0/0x39 @ 1
[    7.804616] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs
[    7.810018] calling  init_nls_cp1250+0x0/0x39 @ 1
[    7.814720] initcall init_nls_cp1250+0x0/0x39 returned 0 after 0 usecs
[    7.820003] calling  init_nls_cp1251+0x0/0x39 @ 1
[    7.830004] initcall init_nls_cp1251+0x0/0x39 returned 0 after 0 usecs
[    7.836519] calling  init_nls_ascii+0x0/0x39 @ 1
[    7.840004] initcall init_nls_ascii+0x0/0x39 returned 0 after 0 usecs
[    7.846435] calling  init_nls_iso8859_1+0x0/0x39 @ 1
[    7.850019] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs
[    7.860003] calling  init_nls_iso8859_4+0x0/0x39 @ 1
[    7.864962] initcall init_nls_iso8859_4+0x0/0x39 returned 0 after 0 usecs
[    7.870003] calling  init_nls_iso8859_5+0x0/0x39 @ 1
[    7.874960] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs
[    7.880003] calling  init_nls_iso8859_6+0x0/0x39 @ 1
[    7.884963] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs
[    7.890018] calling  init_nls_iso8859_7+0x0/0x39 @ 1
[    7.900004] initcall init_nls_iso8859_7+0x0/0x39 returned 0 after 0 usecs
[    7.906781] calling  init_nls_cp1255+0x0/0x39 @ 1
[    7.910004] initcall init_nls_cp1255+0x0/0x39 returned 0 after 0 usecs
[    7.916522] calling  init_nls_iso8859_9+0x0/0x39 @ 1
[    7.920004] initcall init_nls_iso8859_9+0x0/0x39 returned 0 after 0 usecs
[    7.930018] calling  init_nls_iso8859_14+0x0/0x39 @ 1
[    7.935067] initcall init_nls_iso8859_14+0x0/0x39 returned 0 after 0 usecs
[    7.940003] calling  init_nls_koi8_r+0x0/0x39 @ 1
[    7.944703] initcall init_nls_koi8_r+0x0/0x39 returned 0 after 0 usecs
[    7.950005] calling  init_sysv_fs+0x0/0x75 @ 1
[    7.965022] initcall init_sysv_fs+0x0/0x75 returned 0 after 9765 usecs
[    7.970091] calling  init_ntfs_fs+0x0/0x253 @ 1
[    7.974615] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[    7.992350] initcall init_ntfs_fs+0x0/0x253 returned 0 after 19531 usecs
[    7.999047] calling  init_ufs_fs+0x0/0x89 @ 1
[    8.011586] initcall init_ufs_fs+0x0/0x89 returned 0 after 9765 usecs
[    8.018020] calling  init_efs_fs+0x0/0x95 @ 1
[    8.020021] EFS: 1.0a - http://aeschi.ch.eu.org/efs/
[    8.035735] initcall init_efs_fs+0x0/0x95 returned 0 after 9765 usecs
[    8.040030] calling  init_romfs_fs+0x0/0xab @ 1
[    8.044555] ROMFS MTD (C) 2007 Red Hat, Inc.
[    8.061332] initcall init_romfs_fs+0x0/0xab returned 0 after 19531 usecs
[    8.068025] calling  init_qnx4_fs+0x0/0x99 @ 1
[    8.080617] QNX4 filesystem 0.2.3 registered.
[    8.084973] initcall init_qnx4_fs+0x0/0x99 returned 0 after 9765 usecs
[    8.090004] calling  init_autofs_fs+0x0/0x39 @ 1
[    8.094615] initcall init_autofs_fs+0x0/0x39 returned 0 after 0 usecs
[    8.100003] calling  init_autofs4_fs+0x0/0x4c @ 1
[    8.104702] initcall init_autofs4_fs+0x0/0x4c returned -16 after 0 usecs
[    8.110004] initcall init_autofs4_fs+0x0/0x4c returned with error code -16 
[    8.120025] calling  fuse_init+0x0/0x15c @ 1
[    8.124295] fuse init (API version 7.12)
[    8.139711] device: 'fuse': device_add
[    8.151362] initcall fuse_init+0x0/0x15c returned 0 after 29296 usecs
[    8.157795] calling  init_udf_fs+0x0/0x89 @ 1
[    8.171133] initcall init_udf_fs+0x0/0x89 returned 0 after 9765 usecs
[    8.177562] calling  init_omfs_fs+0x0/0x39 @ 1
[    8.180008] initcall init_omfs_fs+0x0/0x39 returned 0 after 0 usecs
[    8.186268] calling  init_jfs_fs+0x0/0x1f8 @ 1
[    8.202499] JFS: nTxBlock = 7700, nTxLock = 61601
[    8.214301] initcall init_jfs_fs+0x0/0x1f8 returned 0 after 19531 usecs
[    8.220098] calling  init_nilfs_fs+0x0/0xb9 @ 1
[    8.226415] initcall init_nilfs_fs+0x0/0xb9 returned 0 after 0 usecs
[    8.230029] calling  ocfs2_init+0x0/0x4c5 @ 1
[    8.234386] OCFS2 1.5.0
[    8.260226] initcall ocfs2_init+0x0/0x4c5 returned 0 after 29296 usecs
[    8.266748] calling  ocfs2_stack_glue_init+0x0/0xbb @ 1
[    8.270290] initcall ocfs2_stack_glue_init+0x0/0xbb returned 0 after 0 usecs
[    8.277325] calling  o2cb_stack_init+0x0/0x39 @ 1
[    8.280003] ocfs2: Registered cluster interface o2cb
[    8.284962] initcall o2cb_stack_init+0x0/0x39 returned 0 after 0 usecs
[    8.290003] calling  init_o2nm+0x0/0xcf @ 1
[    8.294182] OCFS2 Node Manager 1.5.0
[    8.312148] initcall init_o2nm+0x0/0xcf returned 0 after 19531 usecs
[    8.318494] calling  dlm_init+0x0/0x38a @ 1
[    8.320042] OCFS2 DLM 1.5.0
[    8.334832] initcall dlm_init+0x0/0x38a returned 0 after 9765 usecs
[    8.340030] calling  init_dlmfs_fs+0x0/0x106 @ 1
[    8.344646] OCFS2 DLMFS 1.5.0
[    8.358507] OCFS2 User DLM kernel interface loaded
[    8.360023] initcall init_dlmfs_fs+0x0/0x106 returned 0 after 19531 usecs
[    8.370004] calling  init_gfs2_fs+0x0/0x20d @ 1
[    8.382435] GFS2 (built Aug  2 2009 22:49:39) installed
[    8.387660] initcall init_gfs2_fs+0x0/0x20d returned 0 after 9765 usecs
[    8.390030] calling  ipc_init+0x0/0x56 @ 1
[    8.394148] msgmni has been set to 1925
[    8.400023] initcall ipc_init+0x0/0x56 returned 0 after 9765 usecs
[    8.406200] calling  ipc_sysctl_init+0x0/0x3b @ 1
[    8.410027] sysctl table check failed: /kernel/shmmax .1.34 No proc_handler
[    8.420005] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    8.426868] Call Trace:
[    8.429324]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    8.430021]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    8.440005]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    8.446005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    8.450005]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    8.456437]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    8.460005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    8.470025]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    8.476115]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    8.480006]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    8.485665]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    8.490007]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    8.500006]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    8.505830]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.510019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.515759]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    8.520006]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    8.525490]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.530004]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    8.540004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    8.545742]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    8.550020]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    8.555934]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    8.560006]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    8.565404]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    8.570005]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    8.575394]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    8.580011] sysctl table check failed: /kernel/shmall .1.41 No proc_handler
[    8.590018] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    8.596883] Call Trace:
[    8.600005]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    8.604963]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    8.610004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    8.616001]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    8.620005]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    8.630020]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    8.635671]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    8.640005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    8.646088]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    8.650005]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    8.655655]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    8.660005]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    8.670020]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    8.675848]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.680004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.685743]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    8.690004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    8.700004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.705743]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    8.710019]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    8.715760]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    8.720005]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    8.725917]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    8.730007]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    8.735405]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    8.740005]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    8.745396]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    8.750026] sysctl table check failed: /kernel/shmmni .1.45 No proc_handler
[    8.762156] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    8.769021] Call Trace:
[    8.770004]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    8.774962]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    8.780004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    8.786004]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    8.790020]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    8.800004]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    8.805656]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    8.810005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    8.816088]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    8.820004]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    8.830020]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    8.835588]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    8.840005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    8.845829]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.850004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.855742]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    8.860004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    8.870019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    8.875758]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    8.880004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    8.885741]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    8.890004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    8.895916]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    8.900005]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    8.910019]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    8.914982]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    8.920004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    8.925143] sysctl table check failed: /kernel/msgmax .1.35 No proc_handler
[    8.932778] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    8.939645] Call Trace:
[    8.940004]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    8.944963]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    8.950019]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    8.956020]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    8.960005]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    8.970004]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    8.975658]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    8.980005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    8.990022]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    8.995586]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    9.000005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    9.005569]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    9.010005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    9.015829]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.020004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.030019]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    9.036019]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    9.040011]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.045751]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    9.050005]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    9.055743]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    9.060004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    9.070020]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    9.075327]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    9.080004]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    9.084965]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    9.090004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    9.095141] sysctl table check failed: /kernel/msgmni .1.42 No proc_handler
[    9.103402] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    9.110017] Call Trace:
[    9.112468]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    9.117432]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    9.120004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    9.130005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    9.136521]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    9.140004]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    9.145656]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    9.150020]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    9.160004]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    9.165569]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    9.170005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    9.175569]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    9.180005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    9.185831]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.190019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.200005]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    9.206002]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    9.210004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.215743]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    9.220004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    9.225743]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    9.230019]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    9.240005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    9.245311]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    9.250006]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    9.254972]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    9.260004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    9.265142] sysctl table check failed: /kernel/msgmnb .1.36 No proc_handler
[    9.273419] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    9.280002] Call Trace:
[    9.282451]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    9.287413]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    9.290004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    9.300005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    9.306522]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    9.310019]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    9.315674]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    9.320005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    9.330004]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    9.335571]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    9.340005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    9.345570]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    9.350020]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    9.360004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.365743]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.370005]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    9.376002]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    9.380004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.385743]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    9.390019]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    9.400004]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    9.405917]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    9.410005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    9.415308]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    9.420004]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    9.424962]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    9.430019]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    9.435161] sysctl table check failed: /kernel/sem .1.43 No proc_handler
[    9.443144] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    9.450002] Call Trace:
[    9.452453]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    9.457413]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    9.460004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    9.470020]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    9.476539]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    9.480004]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    9.490005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    9.496090]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    9.500004]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    9.505569]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    9.510022]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    9.515587]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    9.520005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    9.530004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.535742]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.540005]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    9.546002]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    9.550019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.560005]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    9.565394]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    9.570004]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    9.575915]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    9.580005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    9.585310]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    9.590019]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    9.594982]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    9.600004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    9.605142] sysctl table check failed: /kernel/auto_msgmni  No proc_handler
[    9.613367] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    9.620002] Call Trace:
[    9.622453]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    9.630019]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    9.636019]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    9.640005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    9.646521]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    9.650004]  [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[    9.660005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    9.666090]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    9.670019]  [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[    9.675587]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    9.680005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    9.690005]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    9.696090]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    9.700004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.705743]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.710019]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    9.716020]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    9.720004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.730004]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    9.735396]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    9.740004]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    9.745915]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    9.750020]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    9.755327]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    9.760004]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    9.764963]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[    9.770006]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[    9.780007] initcall ipc_sysctl_init+0x0/0x3b returned 0 after 1337890 usecs
[    9.787048] calling  init_mqueue_fs+0x0/0xee @ 1
[    9.800719] sysctl table check failed: /fs/mqueue/queues_max  No proc_handler
[    9.807935] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[    9.810025] Call Trace:
[    9.812478]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[    9.820005]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[    9.826002]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    9.830004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[    9.840005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[    9.846531]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[    9.850020]  [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34
[    9.855673]  [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6
[    9.860005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[    9.870005]  [<ffffffff813ffe15>] ? init_once+0x0/0x3b
[    9.875135]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[    9.880004]  [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40
[    9.886349]  [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee
[    9.890019]  [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[    9.895586]  [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[    9.900005]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[    9.910005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[    9.915570]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[    9.920005]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[    9.925829]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.930019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.935760]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[    9.940005]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[    9.950004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[    9.955742]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[    9.960004]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[    9.965743]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[    9.970019]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[    9.980005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[    9.985319]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[    9.990004]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[    9.994963]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[   10.000004]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[   10.005142] sysctl table check failed: /fs/mqueue/msg_max  No proc_handler
[   10.013031] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[   10.020002] Call Trace:
[   10.022451]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[   10.027412]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[   10.030007]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[   10.036010]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[   10.040005]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[   10.050020]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[   10.056451]  [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34
[   10.060005]  [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6
[   10.070005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[   10.076089]  [<ffffffff813ffe15>] ? init_once+0x0/0x3b
[   10.080005]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[   10.086089]  [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40
[   10.090019]  [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee
[   10.095501]  [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[   10.100004]  [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[   10.110004]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[   10.115657]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[   10.120005]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[   10.126089]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[   10.130019]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[   10.135758]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[   10.140005]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[   10.150004]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[   10.155484]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[   10.160004]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[   10.165395]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[   10.170019]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[   10.175933]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[   10.180005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[   10.190005]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[   10.195396]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[   10.200005]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[   10.205404]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[   10.210024] sysctl table check failed: /fs/mqueue/msgsize_max  No proc_handler
[   10.217327] Pid: 1, comm: swapper Tainted: G        W  2.6.31-rc5-tip #291
[   10.220002] Call Trace:
[   10.222451]  [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[   10.230004]  [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[   10.236003]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[   10.240004]  [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[   10.250020]  [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[   10.256540]  [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[   10.260005]  [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34
[   10.265657]  [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6
[   10.270005]  [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[   10.280004]  [<ffffffff813ffe15>] ? init_once+0x0/0x3b
[   10.285137]  [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[   10.290022]  [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40
[   10.296367]  [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee
[   10.300004]  [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[   10.310004]  [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[   10.315571]  [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[   10.320005]  [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[   10.325570]  [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[   10.330020]  [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[   10.335844]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[   10.340004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[   10.350005]  [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[   10.356002]  [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[   10.360004]  [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[   10.365742]  [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[   10.370019]  [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[   10.375759]  [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[   10.380004]  [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[   10.390005]  [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[   10.395311]  [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[   10.400004]  [<ffffffff8102f34a>] child_rip+0xa/0x20
[   10.404964]  [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[   10.410019]  [<ffffffff8102f340>] ? child_rip+0x0/0x20
[   10.415290] initcall init_mqueue_fs+0x0/0xee returned 0 after 605468 usecs
[   10.420004] calling  key_proc_init+0x0/0x5a @ 1
[   10.424550] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs
[   10.430004] calling  crypto_wq_init+0x0/0x59 @ 1
[   10.434817] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs
[   10.440049] calling  crypto_algapi_init+0x0/0x34 @ 1
[   10.450014] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs
[   10.456798] calling  chainiv_module_init+0x0/0x39 @ 1
[   10.460007] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.466875] calling  eseqiv_module_init+0x0/0x39 @ 1
[   10.470006] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.480019] calling  seqiv_module_init+0x0/0x39 @ 1
[   10.484895] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.490003] calling  hmac_module_init+0x0/0x39 @ 1
[   10.494789] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.500004] calling  crypto_xcbc_module_init+0x0/0x39 @ 1
[   10.510005] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.517221] calling  crypto_null_mod_init+0x0/0xa5 @ 1
[   10.520117] alg: No test for cipher_null (cipher_null-generic)
[   10.526097] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[   10.530179] alg: No test for digest_null (digest_null-generic)
[   10.540174] alg: No test for compress_null (compress_null-generic)
[   10.546359] initcall crypto_null_mod_init+0x0/0xa5 returned 0 after 19531 usecs
[   10.550025] calling  md4_mod_init+0x0/0x39 @ 1
[   10.554659] initcall md4_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.560051] calling  md5_mod_init+0x0/0x39 @ 1
[   10.564663] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.570053] calling  rmd128_mod_init+0x0/0x39 @ 1
[   10.580162] initcall rmd128_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.586677] calling  rmd160_mod_init+0x0/0x39 @ 1
[   10.590216] initcall rmd160_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.596736] calling  rmd256_mod_init+0x0/0x39 @ 1
[   10.600185] initcall rmd256_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.610054] calling  sha1_generic_mod_init+0x0/0x39 @ 1
[   10.615423] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.620022] calling  sha256_generic_mod_init+0x0/0x65 @ 1
[   10.625722] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[   10.630055] calling  wp512_mod_init+0x0/0x8a @ 1
[   10.640627] initcall wp512_mod_init+0x0/0x8a returned 0 after 0 usecs
[   10.647058] calling  tgr192_mod_init+0x0/0x8a @ 1
[   10.650553] initcall tgr192_mod_init+0x0/0x8a returned 0 after 0 usecs
[   10.657073] calling  crypto_ecb_module_init+0x0/0x39 @ 1
[   10.660173] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.670004] calling  crypto_cbc_module_init+0x0/0x39 @ 1
[   10.675310] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.680004] calling  crypto_module_init+0x0/0x39 @ 1
[   10.684963] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.690003] calling  crypto_module_init+0x0/0x39 @ 1
[   10.700021] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.706798] calling  crypto_ctr_module_init+0x0/0x69 @ 1
[   10.710006] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs
[   10.720004] calling  cryptd_init+0x0/0x109 @ 1
[   10.724450] initcall cryptd_init+0x0/0x109 returned 0 after 0 usecs
[   10.730004] calling  des_generic_mod_init+0x0/0x65 @ 1
[   10.735530] initcall des_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[   10.740099] calling  fcrypt_mod_init+0x0/0x39 @ 1
[   10.744891] alg: No test for fcrypt (fcrypt-generic)
[   10.751125] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 9765 usecs
[   10.760024] calling  blowfish_mod_init+0x0/0x39 @ 1
[   10.765837] initcall blowfish_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.770024] calling  twofish_mod_init+0x0/0x39 @ 1
[   10.775129] initcall twofish_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.780008] calling  aes_init+0x0/0x39 @ 1
[   10.784301] initcall aes_init+0x0/0x39 returned 0 after 0 usecs
[   10.790004] calling  cast5_mod_init+0x0/0x39 @ 1
[   10.800209] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.806641] calling  cast6_mod_init+0x0/0x39 @ 1
[   10.810222] initcall cast6_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.816652] calling  arc4_init+0x0/0x39 @ 1
[   10.820198] initcall arc4_init+0x0/0x39 returned 0 after 0 usecs
[   10.826200] calling  tea_mod_init+0x0/0x8a @ 1
[   10.830601] initcall tea_mod_init+0x0/0x8a returned 0 after 0 usecs
[   10.840004] calling  khazad_mod_init+0x0/0x39 @ 1
[   10.844896] initcall khazad_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.850004] calling  anubis_mod_init+0x0/0x39 @ 1
[   10.854984] initcall anubis_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.860004] calling  seed_init+0x0/0x39 @ 1
[   10.864360] initcall seed_init+0x0/0x39 returned 0 after 0 usecs
[   10.870004] calling  deflate_mod_init+0x0/0x39 @ 1
[   10.875615] initcall deflate_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.880004] calling  zlib_mod_init+0x0/0x39 @ 1
[   10.891249] initcall zlib_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.897594] calling  michael_mic_init+0x0/0x39 @ 1
[   10.900195] initcall michael_mic_init+0x0/0x39 returned 0 after 0 usecs
[   10.906797] calling  crc32c_mod_init+0x0/0x39 @ 1
[   10.910215] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.920005] calling  crypto_authenc_module_init+0x0/0x39 @ 1
[   10.925655] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs
[   10.930004] calling  lzo_mod_init+0x0/0x39 @ 1
[   10.934737] initcall lzo_mod_init+0x0/0x39 returned 0 after 0 usecs
[   10.940005] calling  krng_mod_init+0x0/0x39 @ 1
[   10.944614] alg: No test for stdrng (krng)
[   10.950132] initcall krng_mod_init+0x0/0x39 returned 0 after 9765 usecs
[   10.960004] calling  proc_genhd_init+0x0/0x63 @ 1
[   10.964723] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs
[   10.970004] calling  bsg_init+0x0/0x155 @ 1
[   10.974695] device class 'bsg': registering
[   10.980243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   10.987629] initcall bsg_init+0x0/0x155 returned 0 after 9765 usecs
[   10.990004] calling  noop_init+0x0/0x3b @ 1
[   10.994209] io scheduler noop registered (default)
[   11.000004] initcall noop_init+0x0/0x3b returned 0 after 9765 usecs
[   11.006260] calling  as_init+0x0/0x3b @ 1
[   11.010003] io scheduler anticipatory registered
[   11.014617] initcall as_init+0x0/0x3b returned 0 after 0 usecs
[   11.020025] calling  deadline_init+0x0/0x3b @ 1
[   11.024554] io scheduler deadline registered
[   11.030004] initcall deadline_init+0x0/0x3b returned 0 after 9765 usecs
[   11.036607] calling  debug_objects_init_debugfs+0x0/0x8a @ 1
[   11.040035] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs
[   11.050004] calling  libcrc32c_mod_init+0x0/0x53 @ 1
[   11.054967] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs
[   11.060019] calling  percpu_counter_startup+0x0/0x54 @ 1
[   11.065326] initcall percpu_counter_startup+0x0/0x54 returned 0 after 0 usecs
[   11.070007] calling  pci_init+0x0/0x60 @ 1
[   11.080015] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.086272] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.090005] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xe3
[   11.095834] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.100019] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.110003] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xe3
[   11.115834] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x4e
[   11.120004] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x63e
[   11.130003] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xe3
[   11.135834] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.140019] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.170025] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe3
[   11.175864] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x4e
[   11.180005] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x63e
[   11.186623] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xe3
[   11.190010] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.200004] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.206609] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xe3
[   11.210010] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.216270] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.220026] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xe3
[   11.230010] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.236271] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.240004] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xe3
[   11.250010] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.256271] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.260019] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xe3
[   11.265852] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[   11.270005] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.280004] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.286607] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xe3
[   11.290010] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[   11.300019] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.306278] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.310003] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xe3
[   11.320010] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[   11.327568] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.330006] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.340018] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xe3
[   11.345853] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[   11.350004] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.360004] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.366607] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xe3
[   11.370010] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x76
[   11.380022] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.386278] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.390003] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xe3
[   11.395833] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x76
[   11.400006] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x4e
[   11.410004] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x63e
[   11.416609] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xe3
[   11.420024] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x76
[   11.430006] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x4e
[   11.436269] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x63e
[   11.440003] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xe3
[   11.445835] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x76
[   11.450006] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x4e
[   11.460019] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x63e
[   11.466624] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xe3
[   11.470010] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.476270] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.480004] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xe3
[   11.490010] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x4e
[   11.496271] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x63e
[   11.500018] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xe3
[   11.510004] pci 0000:01:00.0: Boot video device
[   11.514536] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x4e
[   11.520004] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x63e
[   11.526609] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xe3
[   11.530009] initcall pci_init+0x0/0x60 returned 0 after 439453 usecs
[   11.540019] calling  pci_proc_init+0x0/0x90 @ 1
[   11.544850] initcall pci_proc_init+0x0/0x90 returned 0 after 0 usecs
[   11.550004] calling  pci_hotplug_init+0x0/0x74 @ 1
[   11.554788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.560004] initcall pci_hotplug_init+0x0/0x74 returned 0 after 9765 usecs
[   11.566867] calling  zt5550_init+0x0/0xa3 @ 1
[   11.570002] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[   11.580021] bus: 'pci': add driver zt5550_hc
[   11.584558] initcall zt5550_init+0x0/0xa3 returned 0 after 9765 usecs
[   11.590008] calling  cpcihp_generic_init+0x0/0x443 @ 1
[   11.595142] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[   11.600002] cpcihp_generic: not configured, disabling.
[   11.605136] initcall cpcihp_generic_init+0x0/0x443 returned -22 after 9765 usecs
[   11.610004] initcall cpcihp_generic_init+0x0/0x443 returned with error code -22 
[   11.620004] calling  shpcd_init+0x0/0x88 @ 1
[   11.624270] bus: 'pci': add driver shpchp
[   11.630040] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver shpchp
[   11.640003] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0b.0
[   11.647918] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver shpchp
[   11.650019] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0c.0
[   11.660147] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver shpchp
[   11.670057] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0d.0
[   11.680157] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver shpchp
[   11.688493] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0e.0
[   11.690459] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.700058] initcall shpcd_init+0x0/0x88 returned 0 after 78125 usecs
[   11.710004] calling  init_legacy+0x0/0x69 @ 1
[   11.714648] initcall init_legacy+0x0/0x69 returned 0 after 0 usecs
[   11.720004] calling  tdo24m_init+0x0/0x39 @ 1
[   11.724357] bus: 'spi': add driver tdo24m
[   11.730232] initcall tdo24m_init+0x0/0x39 returned 0 after 9765 usecs
[   11.736669] calling  kb3886_init+0x0/0x32 @ 1
[   11.740071] initcall kb3886_init+0x0/0x32 returned -19 after 0 usecs
[   11.746415] calling  display_class_init+0x0/0xa5 @ 1
[   11.750004] device class 'display': registering
[   11.754753] initcall display_class_init+0x0/0xa5 returned 0 after 0 usecs
[   11.760026] calling  rand_initialize+0x0/0x58 @ 1
[   11.764761] initcall rand_initialize+0x0/0x58 returned 0 after 0 usecs
[   11.770004] calling  tty_init+0x0/0x11c @ 1
[   11.774192] device: 'tty': device_add
[   11.780256] device: 'console': device_add
[   11.784483] device: 'tty0': device_add
[   11.790282] device class 'vc': registering
[   11.794596] device: 'vcs': device_add
[   11.800199] device: 'vcsa': device_add
[   11.804190] device: 'vcs1': device_add
[   11.808152] device: 'vcsa1': device_add
[   11.810274] device: 'tty1': device_add
[   11.814291] device: 'tty2': device_add
[   11.820435] device: 'tty3': device_add
[   11.824414] device: 'tty4': device_add
[   11.828383] device: 'tty5': device_add
[   11.830409] device: 'tty6': device_add
[   11.834375] device: 'tty7': device_add
[   11.840251] device: 'tty8': device_add
[   11.844259] device: 'tty9': device_add
[   11.848241] device: 'tty10': device_add
[   11.850251] device: 'tty11': device_add
[   11.854305] device: 'tty12': device_add
[   11.860245] device: 'tty13': device_add
[   11.864310] device: 'tty14': device_add
[   11.868358] device: 'tty15': device_add
[   11.870285] device: 'tty16': device_add
[   11.874341] device: 'tty17': device_add
[   11.880229] device: 'tty18': device_add
[   11.884333] device: 'tty19': device_add
[   11.888387] device: 'tty20': device_add
[   11.890304] device: 'tty21': device_add
[   11.894358] device: 'tty22': device_add
[   11.900234] device: 'tty23': device_add
[   11.904304] device: 'tty24': device_add
[   11.908378] device: 'tty25': device_add
[   11.910285] device: 'tty26': device_add
[   11.914343] device: 'tty27': device_add
[   11.920232] device: 'tty28': device_add
[   11.924323] device: 'tty29': device_add
[   11.930583] device: 'tty30': device_add
[   11.934636] device: 'tty31': device_add
[   11.938689] device: 'tty32': device_add
[   11.940257] device: 'tty33': device_add
[   11.944339] device: 'tty34': device_add
[   11.950425] device: 'tty35': device_add
[   11.954498] device: 'tty36': device_add
[   11.958560] device: 'tty37': device_add
[   11.960312] device: 'tty38': device_add
[   11.964416] device: 'tty39': device_add
[   11.970271] device: 'tty40': device_add
[   11.974362] device: 'tty41': device_add
[   11.978412] device: 'tty42': device_add
[   11.980250] device: 'tty43': device_add
[   11.984308] device: 'tty44': device_add
[   11.990259] device: 'tty45': device_add
[   11.994316] device: 'tty46': device_add
[   12.000630] device: 'tty47': device_add
[   12.004691] device: 'tty48': device_add
[   12.008785] device: 'tty49': device_add
[   12.010226] device: 'tty50': device_add
[   12.014339] device: 'tty51': device_add
[   12.020266] device: 'tty52': device_add
[   12.024375] device: 'tty53': device_add
[   12.028433] device: 'tty54': device_add
[   12.030269] device: 'tty55': device_add
[   12.034336] device: 'tty56': device_add
[   12.040295] device: 'tty57': device_add
[   12.044354] device: 'tty58': device_add
[   12.048448] device: 'tty59': device_add
[   12.050240] device: 'tty60': device_add
[   12.054313] device: 'tty61': device_add
[   12.060252] device: 'tty62': device_add
[   12.064308] device: 'tty63': device_add
[   12.070630] initcall tty_init+0x0/0x11c returned 0 after 292968 usecs
[   12.077059] calling  pty_init+0x0/0x35d @ 1
[   12.080087] device: 'ptmx': device_add
[   12.084072] initcall pty_init+0x0/0x35d returned 0 after 0 usecs
[   12.090036] calling  sysrq_init+0x0/0x4c @ 1
[   12.094322] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs
[   12.100004] calling  nozomi_init+0x0/0x153 @ 1
[   12.104441] Initializing Nozomi driver 2.1d (build date: Aug  2 2009 22:49:23)
[   12.110030] bus: 'pci': add driver nozomi
[   12.114293] initcall nozomi_init+0x0/0x153 returned 0 after 9765 usecs
[   12.120059] calling  lp_init_module+0x0/0x259 @ 1
[   12.124771] device class 'printer': registering
[   12.130247] lp: driver loaded but no devices found
[   12.135032] initcall lp_init_module+0x0/0x259 returned 0 after 9765 usecs
[   12.140025] calling  rtc_init+0x0/0x12c @ 1
[   12.144228] device: 'rtc': device_add
[   12.150263] Real Time Clock Driver v1.12b
[   12.154270] initcall rtc_init+0x0/0x12c returned 0 after 9765 usecs
[   12.160024] calling  mod_init+0x0/0x73 @ 1
[   12.164121] initcall mod_init+0x0/0x73 returned -19 after 0 usecs
[   12.170004] calling  ppdev_init+0x0/0xe2 @ 1
[   12.174277] device class 'ppdev': registering
[   12.180212] ppdev: user-space parallel port driver
[   12.184999] initcall ppdev_init+0x0/0xe2 returned 0 after 9765 usecs
[   12.190007] calling  tlclk_init+0x0/0x274 @ 1
[   12.194382] telclk_interrup = 0xf non-mcpbl0010 hw.
[   12.200030] initcall tlclk_init+0x0/0x274 returned -6 after 9765 usecs
[   12.206547] initcall tlclk_init+0x0/0x274 returned with error code -6 
[   12.210004] calling  mwave_init+0x0/0x2ca @ 1
[   12.220008] smapi::smapi_init, ERROR invalid usSmapiID
[   12.225142] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[   12.230025] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[   12.240002] mwave: mwavedd::mwave_init: Error: Failed to initialize
[   12.246261] initcall mwave_init+0x0/0x2ca returned -5 after 19531 usecs
[   12.250004] initcall mwave_init+0x0/0x2ca returned with error code -5 
[   12.260004] calling  agp_init+0x0/0x4b @ 1
[   12.264094] Linux agpgart interface v0.103
[   12.270019] initcall agp_init+0x0/0x4b returned 0 after 9765 usecs
[   12.276192] calling  agp_amd64_init+0x0/0xe8 @ 1
[   12.280003] bus: 'pci': add driver agpgart-amd64
[   12.285079] initcall agp_amd64_init+0x0/0xe8 returned -19 after 0 usecs
[   12.290005] calling  agp_intel_init+0x0/0x50 @ 1
[   12.294615] bus: 'pci': add driver agpgart-intel
[   12.300241] initcall agp_intel_init+0x0/0x50 returned 0 after 9765 usecs
[   12.306936] calling  agp_sis_init+0x0/0x50 @ 1
[   12.310004] bus: 'pci': add driver agpgart-sis
[   12.314705] initcall agp_sis_init+0x0/0x50 returned 0 after 0 usecs
[   12.320005] calling  ipmi_init_msghandler_mod+0x0/0x34 @ 1
[   12.325482] bus: 'platform': add driver ipmi
[   12.330221] ipmi message handler version 39.2
[   12.334587] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 9765 usecs
[   12.340005] calling  ipmi_wdog_init+0x0/0x153 @ 1
[   12.350025] IPMI Watchdog: driver initialized
[   12.354383] initcall ipmi_wdog_init+0x0/0x153 returned 0 after 0 usecs
[   12.360006] calling  ipmi_poweroff_init+0x0/0xb7 @ 1
[   12.364969] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[   12.370028] initcall ipmi_poweroff_init+0x0/0xb7 returned 0 after 9765 usecs
[   12.380026] calling  drm_core_init+0x0/0x145 @ 1
[   12.384647] device class 'drm': registering
[   12.390287] [drm] Initialized drm 1.1.0 20060810
[   12.394903] initcall drm_core_init+0x0/0x145 returned 0 after 9765 usecs
[   12.400005] calling  mga_init+0x0/0x45 @ 1
[   12.404137] initcall mga_init+0x0/0x45 returned 0 after 0 usecs
[   12.410004] calling  i810_init+0x0/0x45 @ 1
[   12.414224] initcall i810_init+0x0/0x45 returned 0 after 0 usecs
[   12.420004] calling  sis_init+0x0/0x45 @ 1
[   12.424179] initcall sis_init+0x0/0x45 returned 0 after 0 usecs
[   12.430021] calling  savage_init+0x0/0x45 @ 1
[   12.434606] initcall savage_init+0x0/0x45 returned 0 after 0 usecs
[   12.440026] calling  via_init+0x0/0x4a @ 1
[   12.444219] initcall via_init+0x0/0x4a returned 0 after 0 usecs
[   12.450004] calling  serial8250_init+0x0/0x16f @ 1
[   12.454786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   12.460051] Registering platform device 'serial8250'. Parent at platform
[   12.470005] device: 'serial8250': device_add
[   12.474276] bus: 'platform': add device serial8250
[   12.480304] async_waiting @ 1
[   12.483281] async_continuing @ 1 after 0 usec
[   12.620064] async_waiting @ 1
[   12.623031] async_continuing @ 1 after 0 usec
�[   12.760103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.766120] device: 'ttyS0': device_add
[   12.770255] device: 'ttyS1': device_add
[   12.774346] device: 'ttyS2': device_add
[   12.778434] device: 'ttyS3': device_add
[   12.780253] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[   12.787549] bus: 'platform': add driver serial8250
[   12.790015] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[   12.800003] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[   12.810011] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[   12.817048] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[   12.820248] initcall serial8250_init+0x0/0x16f returned 0 after 361328 usecs
[   12.830029] calling  jsm_init_module+0x0/0x6e @ 1
[   12.834778] bus: 'pci': add driver jsm
[   12.840253] initcall jsm_init_module+0x0/0x6e returned 0 after 9765 usecs
[   12.847033] calling  init_kgdboc+0x0/0x3b @ 1
[   12.850006] initcall init_kgdboc+0x0/0x3b returned 0 after 0 usecs
[   12.860004] calling  parport_default_proc_register+0x0/0x42 @ 1
[   12.865956] initcall parport_default_proc_register+0x0/0x42 returned 0 after 0 usecs
[   12.870003] calling  parport_pc_init+0x0/0x355 @ 1
[   12.874789] bus: 'platform': add driver parport_pc
[   12.880233] IT8712 SuperIO detected.
[   12.884151] Registering platform device 'parport_pc.956'. Parent at platform
[   12.890027] device: 'parport_pc.956': device_add
[   12.894648] bus: 'platform': add device parport_pc.956
[   12.900217] bus: 'platform': driver_probe_device: matched device parport_pc.956 with driver parport_pc
[   12.910004] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.956
[   12.920011] driver: 'parport_pc.956': driver_bound: bound to device 'parport_pc'
[   12.930005] bus: 'platform': really_probe: bound device parport_pc.956 to driver parport_pc
[   12.938429] bus: 'platform': remove device parport_pc.956
[   12.940237] Registering platform device 'parport_pc.888'. Parent at platform
[   12.950027] device: 'parport_pc.888': device_add
[   12.954647] bus: 'platform': add device parport_pc.888
[   12.960217] bus: 'platform': driver_probe_device: matched device parport_pc.888 with driver parport_pc
[   12.970004] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.888
[   12.978693] driver: 'parport_pc.888': driver_bound: bound to device 'parport_pc'
[   12.980003] bus: 'platform': really_probe: bound device parport_pc.888 to driver parport_pc
[   12.990053] parport0: PC-style at 0x378 (0x778)async_waiting @ 1
[   13.000003] async_continuing @ 1 after 0 usec
[   13.141034]  [PCSPP,TRISTATE]
[   13.144052] parport0: irq 7 detected
[   13.220165] device: 'parport0': device_add
[   13.224600] device: 'lp0': device_add
[   13.228517] lp0: using parport0 (polling).
[   13.230028] lp0: console ready
[   13.233086] Registering platform device 'parport_pc.632'. Parent at platform
[   13.240005] device: 'parport_pc.632': device_add
[   13.244621] bus: 'platform': add device parport_pc.632
[   13.250227] bus: 'platform': driver_probe_device: matched device parport_pc.632 with driver parport_pc
[   13.260082] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.632
[   13.270011] driver: 'parport_pc.632': driver_bound: bound to device 'parport_pc'
[   13.277396] bus: 'platform': really_probe: bound device parport_pc.632 to driver parport_pc
[   13.280073] bus: 'platform': remove device parport_pc.632
[   13.290235] bus: 'pci': add driver parport_pc
[   13.294830] initcall parport_pc_init+0x0/0x355 returned 0 after 410156 usecs
[   13.300072] calling  topology_sysfs_init+0x0/0x82 @ 1
[   13.305154] initcall topology_sysfs_init+0x0/0x82 returned 0 after 0 usecs
[   13.310004] calling  floppy_init+0x0/0xe23 @ 1
[   13.320089] Platform driver 'floppy' needs updating - please use dev_pm_ops
[   13.327040] bus: 'platform': add driver floppy
[   13.330346] Floppy drive(s): fd0 is 1.44M
[   13.353888] FDC 0 is a post-1991 82077
[   13.358610] Registering platform device 'floppy.0'. Parent at platform
[   13.360022] device: 'floppy.0': device_add
[   13.364131] bus: 'platform': add device floppy.0
[   13.370229] bus: 'platform': driver_probe_device: matched device floppy.0 with driver floppy
[   13.380005] bus: 'platform': really_probe: probing driver floppy with device floppy.0
[   13.390011] driver: 'floppy.0': driver_bound: bound to device 'floppy'
[   13.396528] bus: 'platform': really_probe: bound device floppy.0 to driver floppy
[   13.400012] device: 'fd0': device_add
[   13.404023] device: '2:0': device_add
[   13.410281] initcall floppy_init+0x0/0xe23 returned 0 after 87890 usecs
[   13.416885] calling  loop_init+0x0/0x1bc @ 1
[   13.420291] device: 'loop0': device_add
[   13.424478] device: '7:0': device_add
[   13.430289] device: 'loop1': device_add
[   13.434513] device: '7:1': device_add
[   13.438420] device: 'loop2': device_add
[   13.440317] device: '7:2': device_add
[   13.444257] device: 'loop3': device_add
[   13.450344] device: '7:3': device_add
[   13.454278] device: 'loop4': device_add
[   13.460327] device: '7:4': device_add
[   13.464225] device: 'loop5': device_add
[   13.468373] device: '7:5': device_add
[   13.470313] device: 'loop6': device_add
[   13.474463] device: '7:6': device_add
[   13.480406] device: 'loop7': device_add
[   13.484580] device: '7:7': device_add
[   13.488499] loop: module loaded
[   13.490060] initcall loop_init+0x0/0x1bc returned 0 after 68359 usecs
[   13.496494] calling  cpqarray_init+0x0/0x2ba @ 1
[   13.500003] Compaq SMART2 Driver (v 2.6.0)
[   13.504097] bus: 'pci': add driver cpqarray
[   13.510267] bus: 'pci': remove driver cpqarray
[   13.514924] driver: 'cpqarray': driver_release
[   13.520039] initcall cpqarray_init+0x0/0x2ba returned -19 after 19531 usecs
[   13.526988] calling  cciss_init+0x0/0x7a @ 1
[   13.530006] HP CISS Driver (v 3.6.20)
[   13.533907] bus: 'cciss': registered
[   13.537481] bus: 'pci': add driver cciss
[   13.540286] initcall cciss_init+0x0/0x7a returned 0 after 9765 usecs
[   13.546635] calling  DAC960_init_module+0x0/0x78 @ 1
[   13.550022] bus: 'pci': add driver DAC960
[   13.554272] device: 'dac960_gam': device_add
[   13.560269] initcall DAC960_init_module+0x0/0x78 returned 0 after 9765 usecs
[   13.570004] calling  nbd_init+0x0/0x305 @ 1
[   13.574962] nbd: registered device at major 43
[   13.580017] device: 'nbd0': device_add
[   13.584088] device: '43:0': device_add
[   13.588076] device: 'nbd1': device_add
[   13.590350] device: '43:1': device_add
[   13.594362] device: 'nbd2': device_add
[   13.600360] device: '43:2': device_add
[   13.604370] device: 'nbd3': device_add
[   13.608423] device: '43:3': device_add
[   13.610309] device: 'nbd4': device_add
[   13.614390] device: '43:4': device_add
[   13.620243] device: 'nbd5': device_add
[   13.624356] device: '43:5': device_add
[   13.628339] device: 'nbd6': device_add
[   13.630400] device: '43:6': device_add
[   13.634399] device: 'nbd7': device_add
[   13.640345] device: '43:7': device_add
[   13.644381] device: 'nbd8': device_add
[   13.648451] device: '43:8': device_add
[   13.650295] device: 'nbd9': device_add
[   13.654368] device: '43:9': device_add
[   13.660259] device: 'nbd10': device_add
[   13.664438] device: '43:10': device_add
[   13.668513] device: 'nbd11': device_add
[   13.670381] device: '43:11': device_add
[   13.674452] device: 'nbd12': device_add
[   13.680325] device: '43:12': device_add
[   13.684445] device: 'nbd13': device_add
[   13.690703] device: '43:13': device_add
[   13.694776] device: 'nbd14': device_add
[   13.698967] device: '43:14': device_add
[   13.700273] device: 'nbd15': device_add
[   13.704518] device: '43:15': device_add
[   13.710264] initcall nbd_init+0x0/0x305 returned 0 after 136718 usecs
[   13.716692] calling  init_cryptoloop+0x0/0x55 @ 1
[   13.720005] initcall init_cryptoloop+0x0/0x55 returned 0 after 0 usecs
[   13.726519] calling  ibmasm_init+0x0/0x8a @ 1
[   13.730020] bus: 'pci': add driver ibmasm
[   13.734266] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[   13.740010] initcall ibmasm_init+0x0/0x8a returned 0 after 9765 usecs
[   13.750003] calling  ics932s401_init+0x0/0x3b @ 1
[   13.754701] bus: 'i2c': add driver ics932s401
[   13.760342] initcall ics932s401_init+0x0/0x3b returned 0 after 9765 usecs
[   13.767121] calling  tifm_7xx1_init+0x0/0x42 @ 1
[   13.770003] bus: 'pci': add driver tifm_7xx1
[   13.774495] initcall tifm_7xx1_init+0x0/0x42 returned 0 after 0 usecs
[   13.780005] calling  phantom_init+0x0/0x12f @ 1
[   13.784527] device class 'phantom': registering
[   13.790251] bus: 'pci': add driver phantom
[   13.794592] Phantom Linux Driver, version n0.9.8, init OK
[   13.800005] initcall phantom_init+0x0/0x12f returned 0 after 19531 usecs
[   13.806703] calling  ioc4_init+0x0/0x47 @ 1
[   13.810004] bus: 'pci': add driver IOC4
[   13.814066] initcall ioc4_init+0x0/0x47 returned 0 after 0 usecs
[   13.820004] calling  ilo_init+0x0/0xb8 @ 1
[   13.824095] device class 'iLO': registering
[   13.830230] bus: 'pci': add driver hpilo
[   13.834403] initcall ilo_init+0x0/0xb8 returned 0 after 9765 usecs
[   13.840005] calling  c2port_init+0x0/0x77 @ 1
[   13.844353] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   13.850004] device class 'c2port': registering
[   13.854653] initcall c2port_init+0x0/0x77 returned 0 after 9765 usecs
[   13.860005] calling  duramar2150_c2port_init+0x0/0x97 @ 1
[   13.865489] device: 'c2port0': device_add
[   13.870286] c2port c2port0: C2 port uc added
[   13.874553] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   13.880006] initcall duramar2150_c2port_init+0x0/0x97 returned 0 after 19531 usecs
[   13.890004] calling  at24_init+0x0/0x5d @ 1
[   13.894183] bus: 'i2c': add driver at24
[   13.900218] initcall at24_init+0x0/0x5d returned 0 after 9765 usecs
[   13.906478] calling  at25_init+0x0/0x39 @ 1
[   13.910005] bus: 'spi': add driver at25
[   13.914068] initcall at25_init+0x0/0x39 returned 0 after 0 usecs
[   13.920004] calling  eeprom_init+0x0/0x3b @ 1
[   13.924355] bus: 'i2c': add driver eeprom
[   13.930221] initcall eeprom_init+0x0/0x3b returned 0 after 9765 usecs
[   13.936649] calling  max6875_init+0x0/0x3b @ 1
[   13.940004] bus: 'i2c': add driver max6875
[   13.944328] initcall max6875_init+0x0/0x3b returned 0 after 0 usecs
[   13.950004] calling  cb710_init_module+0x0/0x42 @ 1
[   13.954875] bus: 'pci': add driver cb710
[   13.960243] initcall cb710_init_module+0x0/0x42 returned 0 after 9765 usecs
[   13.967196] calling  pasic3_base_init+0x0/0x40 @ 1
[   13.970006] bus: 'platform': add driver pasic3
[   13.974735] bus: 'platform': remove driver pasic3
[   13.980211] driver: 'pasic3': driver_release
[   13.984481] initcall pasic3_base_init+0x0/0x40 returned -19 after 9765 usecs
[   13.990004] calling  ezx_pcap_init+0x0/0x39 @ 1
[   13.994529] bus: 'spi': add driver ezx-pcap
[   14.000221] initcall ezx_pcap_init+0x0/0x39 returned 0 after 9765 usecs
[   14.006825] calling  scsi_tgt_init+0x0/0xb1 @ 1
[   14.010805] device: 'tgt': device_add
[   14.014740] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 0 usecs
[   14.020005] calling  raid_init+0x0/0x39 @ 1
[   14.024179] device class 'raid_devices': registering
[   14.030238] initcall raid_init+0x0/0x39 returned 0 after 9765 usecs
[   14.040012] calling  spi_transport_init+0x0/0x9f @ 1
[   14.044984] device class 'spi_transport': registering
[   14.050240] device class 'spi_host': registering
[   14.055093] initcall spi_transport_init+0x0/0x9f returned 0 after 9765 usecs
[   14.060005] calling  fc_transport_init+0x0/0x73 @ 1
[   14.064872] device class 'fc_host': registering
[   14.070212] device class 'fc_vports': registering
[   14.075112] device class 'fc_remote_ports': registering
[   14.080259] device class 'fc_transport': registering
[   14.085424] initcall fc_transport_init+0x0/0x73 returned 0 after 19531 usecs
[   14.090004] calling  iscsi_transport_init+0x0/0x173 @ 1
[   14.100002] Loading iSCSI transport class v2.0-870.
[   14.104874] device class 'iscsi_transport': registering
[   14.110211] device class 'iscsi_endpoint': registering
[   14.115545] device class 'iscsi_host': registering
[   14.120292] device class 'iscsi_connection': registering
[   14.125804] device class 'iscsi_session': registering
[   14.130326] initcall iscsi_transport_init+0x0/0x173 returned 0 after 29296 usecs
[   14.137714] calling  sas_transport_init+0x0/0xe1 @ 1
[   14.140004] device class 'sas_host': registering
[   14.144883] device class 'sas_phy': registering
[   14.150213] device class 'sas_port': registering
[   14.155050] device class 'sas_device': registering
[   14.160231] device class 'sas_end_device': registering
[   14.165601] device class 'sas_expander': registering
[   14.170215] initcall sas_transport_init+0x0/0xe1 returned 0 after 29296 usecs
[   14.180005] calling  sas_class_init+0x0/0x58 @ 1
[   14.185105] initcall sas_class_init+0x0/0x58 returned 0 after 0 usecs
[   14.190004] calling  srp_transport_init+0x0/0x65 @ 1
[   14.194959] device class 'srp_host': registering
[   14.200216] device class 'srp_remote_ports': registering
[   14.205760] initcall srp_transport_init+0x0/0x65 returned 0 after 9765 usecs
[   14.210005] calling  libfc_init+0x0/0x96 @ 1
[   14.220974] initcall libfc_init+0x0/0x96 returned 0 after 9765 usecs
[   14.227325] calling  fcoe_init+0x0/0x1ab @ 1
[   14.230260] initcall fcoe_init+0x0/0x1ab returned 0 after 0 usecs
[   14.236345] calling  fnic_init_module+0x0/0x20d @ 1
[   14.240004] fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
[   14.246678] bus: 'pci': add driver fnic
[   14.250264] initcall fnic_init_module+0x0/0x20d returned 0 after 9765 usecs
[   14.260010] calling  BusLogic_init+0x0/0x1830 @ 1
[   14.264807] initcall BusLogic_init+0x0/0x1830 returned 0 after 0 usecs
[   14.270004] calling  adpt_init+0x0/0xe95 @ 1
[   14.274267] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[   14.280002] Detecting Adaptec I2O RAID controllers...
[   14.285060] initcall adpt_init+0x0/0xe95 returned -19 after 9765 usecs
[   14.290006] calling  arcmsr_module_init+0x0/0x47 @ 1
[   14.294962] bus: 'pci': add driver arcmsr
[   14.300267] initcall arcmsr_module_init+0x0/0x47 returned 0 after 9765 usecs
[   14.307310] calling  ahc_linux_init+0x0/0x8d @ 1
[   14.310009] bus: 'pci': add driver aic7xxx
[   14.314401] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs
[   14.320004] calling  ahd_linux_init+0x0/0xa7 @ 1
[   14.324617] bus: 'pci': add driver aic79xx
[   14.330254] initcall ahd_linux_init+0x0/0xa7 returned 0 after 9765 usecs
[   14.340005] calling  aac_init+0x0/0x95 @ 1
[   14.344096] Adaptec aacraid driver 1.1-5[2461]-ms
[   14.348800] bus: 'pci': add driver aacraid
[   14.350259] initcall aac_init+0x0/0x95 returned 0 after 9765 usecs
[   14.360005] calling  init_this_scsi_driver+0x0/0x10c @ 1
[   14.365676] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs
[   14.370004] calling  ips_module_init+0x0/0x3b7 @ 1
[   14.374790] bus: 'pci': add driver ips
[   14.380260] bus: 'pci': remove driver ips
[   14.384468] driver: 'ips': driver_release
[   14.390009] initcall ips_module_init+0x0/0x3b7 returned -19 after 19531 usecs
[   14.397135] calling  init_this_scsi_driver+0x0/0x10c @ 1
[   14.400058] scsi: <fdomain> Detection failed (no card)
[   14.405188] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs
[   14.410004] calling  qla1280_init+0x0/0x42 @ 1
[   14.414443] bus: 'pci': add driver qla1280
[   14.420234] initcall qla1280_init+0x0/0x42 returned 0 after 9765 usecs
[   14.430028] calling  qla2x00_module_init+0x0/0x152 @ 1
[   14.435704] QLogic Fibre Channel HBA Driver: 8.03.01-k4
[   14.440005] bus: 'pci': add driver qla2xxx
[   14.444372] initcall qla2x00_module_init+0x0/0x152 returned 0 after 9765 usecs
[   14.450005] calling  dc395x_module_init+0x0/0x42 @ 1
[   14.454970] bus: 'pci': add driver dc395x
[   14.460235] initcall dc395x_module_init+0x0/0x42 returned 0 after 9765 usecs
[   14.467275] calling  dc390_module_init+0x0/0xbf @ 1
[   14.470003] DC390: clustering now enabled by default. If you get problems load
[   14.480002]        with "disable_clustering=1" and report to maintainers
[   14.486694] bus: 'pci': add driver tmscsim
[   14.490236] initcall dc390_module_init+0x0/0xbf returned 0 after 19531 usecs
[   14.497275] calling  mraid_mm_init+0x0/0xa7 @ 1
[   14.500004] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[   14.510010] device: 'megadev0': device_add
[   14.514341] initcall mraid_mm_init+0x0/0xa7 returned 0 after 9765 usecs
[   14.520008] calling  megaraid_init+0x0/0xbc @ 1
[   14.524538] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[   14.530006] bus: 'pci': add driver megaraid
[   14.534429] initcall megaraid_init+0x0/0xbc returned 0 after 9765 usecs
[   14.540005] calling  megasas_init+0x0/0x180 @ 1
[   14.544528] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[   14.550014] bus: 'pci': add driver megaraid_sas
[   14.554778] initcall megasas_init+0x0/0x180 returned 0 after 9765 usecs
[   14.560005] calling  _scsih_init+0x0/0x117 @ 1
[   14.570003] mpt2sas version 01.100.03.00 loaded
[   14.574556] device: 'mpt2ctl': device_add
[   14.578801] bus: 'pci': add driver mpt2sas
[   14.580275] initcall _scsih_init+0x0/0x117 returned 0 after 9765 usecs
[   14.590004] calling  inia100_init+0x0/0x42 @ 1
[   14.594442] bus: 'pci': add driver inia100
[   14.598768] initcall inia100_init+0x0/0x42 returned 0 after 0 usecs
[   14.600005] calling  tw_init+0x0/0x55 @ 1
[   14.604007] 3ware Storage Controller device driver for Linux v1.26.02.002.
[   14.610003] bus: 'pci': add driver 3w-xxxx
[   14.620234] initcall tw_init+0x0/0x55 returned 0 after 19531 usecs
[   14.626409] calling  twa_init+0x0/0x55 @ 1
[   14.630006] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[   14.637308] bus: 'pci': add driver 3w-9xxx
[   14.640235] initcall twa_init+0x0/0x55 returned 0 after 9765 usecs
[   14.646408] calling  ppa_driver_init+0x0/0x4c @ 1
[   14.650004] ppa: Version 2.07 (for Linux 2.4.x)
[   14.660401] initcall ppa_driver_init+0x0/0x4c returned 0 after 9765 usecs
[   14.667177] calling  ipr_init+0x0/0x5c @ 1
[   14.670003] ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
[   14.677472] bus: 'pci': add driver ipr
[   14.680237] initcall ipr_init+0x0/0x5c returned 0 after 9765 usecs
[   14.686410] calling  hptiop_module_init+0x0/0x5c @ 1
[   14.690004] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[   14.696000] bus: 'pci': add driver hptiop
[   14.700247] initcall hptiop_module_init+0x0/0x5c returned 0 after 9765 usecs
[   14.710005] calling  stex_init+0x0/0x55 @ 1
[   14.714179] stex: Promise SuperTrak EX Driver version: 4.6.0000.3
[   14.720004] bus: 'pci': add driver stex
[   14.724070] initcall stex_init+0x0/0x55 returned 0 after 9765 usecs
[   14.730007] calling  mvs_init+0x0/0x79 @ 1
[   14.734124] bus: 'pci': add driver mvsas
[   14.740230] initcall mvs_init+0x0/0x79 returned 0 after 9765 usecs
[   14.746406] calling  cxgb3i_init_module+0x0/0x5d @ 1
[   14.750004] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   14.755763] device: 'cxgb3i': device_add
[   14.760229] iscsi: registered transport (cxgb3i)
[   14.764858] initcall cxgb3i_init_module+0x0/0x5d returned 0 after 9765 usecs
[   14.770005] calling  init_sd+0x0/0x106 @ 1
[   14.774124] device class 'scsi_disk': registering
[   14.780221] bus: 'scsi': add driver sd
[   14.784214] initcall init_sd+0x0/0x106 returned 0 after 9765 usecs
[   14.790005] calling  init_sr+0x0/0x6f @ 1
[   14.794009] bus: 'scsi': add driver sr
[   14.800331] initcall init_sr+0x0/0x6f returned 0 after 9765 usecs
[   14.806414] calling  init_sg+0x0/0x170 @ 1
[   14.810006] device class 'scsi_generic': registering
[   14.815284] initcall init_sg+0x0/0x170 returned 0 after 0 usecs
[   14.820005] calling  ahci_init+0x0/0x42 @ 1
[   14.824184] bus: 'pci': add driver ahci
[   14.830024] initcall ahci_init+0x0/0x42 returned 0 after 9765 usecs
[   14.836285] calling  k2_sata_init+0x0/0x42 @ 1
[   14.840004] bus: 'pci': add driver sata_svw
[   14.844415] initcall k2_sata_init+0x0/0x42 returned 0 after 0 usecs
[   14.850005] calling  piix_init+0x0/0x50 @ 1
[   14.854183] bus: 'pci': add driver ata_piix
[   14.860179] initcall piix_init+0x0/0x50 returned 0 after 9765 usecs
[   14.866440] calling  pdc_ata_init+0x0/0x42 @ 1
[   14.870005] bus: 'pci': add driver sata_promise
[   14.874793] initcall pdc_ata_init+0x0/0x42 returned 0 after 0 usecs
[   14.880004] calling  qs_ata_init+0x0/0x42 @ 1
[   14.884357] bus: 'pci': add driver sata_qstor
[   14.890250] initcall qs_ata_init+0x0/0x42 returned 0 after 9765 usecs
[   14.896685] calling  sil_init+0x0/0x42 @ 1
[   14.900005] bus: 'pci': add driver sata_sil
[   14.904436] initcall sil_init+0x0/0x42 returned 0 after 0 usecs
[   14.910004] calling  sil24_init+0x0/0x42 @ 1
[   14.914267] bus: 'pci': add driver sata_sil24
[   14.920239] initcall sil24_init+0x0/0x42 returned 0 after 9765 usecs
[   14.926582] calling  svia_init+0x0/0x42 @ 1
[   14.930007] bus: 'pci': add driver sata_via
[   14.934454] initcall svia_init+0x0/0x42 returned 0 after 0 usecs
[   14.940004] calling  sis_init+0x0/0x42 @ 1
[   14.944097] bus: 'pci': add driver sata_sis
[   14.950230] initcall sis_init+0x0/0x42 returned 0 after 9765 usecs
[   14.956407] calling  pdc_sata_init+0x0/0x42 @ 1
[   14.960005] bus: 'pci': add driver sata_sx4
[   14.964447] initcall pdc_sata_init+0x0/0x42 returned 0 after 0 usecs
[   14.970004] calling  nv_init+0x0/0x42 @ 1
[   14.974010] bus: 'pci': add driver sata_nv
[   14.980309] initcall nv_init+0x0/0x42 returned 0 after 9765 usecs
[   14.986399] calling  uli_init+0x0/0x42 @ 1
[   14.990005] bus: 'pci': add driver sata_uli
[   14.994411] initcall uli_init+0x0/0x42 returned 0 after 0 usecs
[   15.000005] calling  mv_init+0x0/0x6e @ 1
[   15.004009] bus: 'pci': add driver sata_mv
[   15.008395] bus: 'platform': add driver sata_mv
[   15.010225] initcall mv_init+0x0/0x6e returned 0 after 9765 usecs
[   15.020005] calling  amd_init+0x0/0x42 @ 1
[   15.024096] bus: 'pci': add driver pata_amd
[   15.028292] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd
[   15.030005] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0
[   15.040115] pata_amd 0000:00:06.0: version 0.4.1
[   15.044825] pata_amd 0000:00:06.0: setting latency timer to 64
[   15.050275] scsi0 : pata_amd
[   15.054088] device: 'host0': device_add
[   15.060017] device: 'host0': device_add
[   15.064261] scsi1 : pata_amd
[   15.070009] device: 'host1': device_add
[   15.073859] device: 'host1': device_add
[   15.077990] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   15.080004] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   15.280546] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[   15.286804] ata1.00: 488397168 sectors, multi 1: LBA48 
[   15.290044] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[   15.370475] ata1.00: configured for UDMA/100
[   15.384754] async_waiting @ 1360
[   15.387981] async_continuing @ 1360 after 0 usec
[   15.390285] scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
[   15.400009] device: 'target0:0:0': device_add
[   15.404376] device: '0:0:0:0': device_add
[   15.408436] bus: 'scsi': add device 0:0:0:0
[   15.410267] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[   15.420019] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[   15.427161] device: '0:0:0:0': device_add
[   15.430402] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   15.440228] sd 0:0:0:0: [sda] Write Protect is off
[   15.445012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   15.450106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   15.459143] device: 'sda': device_add
[   15.460589]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[   15.545548] device: 'sda1': device_add
[   15.549369] device: 'sda2': device_add
[   15.550125] device: 'sda3': device_add
[   15.553952] device: 'sda5': device_add
[   15.560067] device: 'sda6': device_add
[   15.563871] device: 'sda7': device_add
[   15.567682] device: 'sda8': device_add
[   15.570083] device: 'sda9': device_add
[   15.573891] device: 'sda10': device_add
[   15.582455] device: '8:0': device_add
[   15.586805] sd 0:0:0:0: [sda] Attached SCSI disk
[   15.590029] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[   15.596113] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[   15.600009] device: '0:0:0:0': device_add
[   15.604334] device: 'sg0': device_add
[   15.610381] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   15.615766] device: '0:0:0:0': device_add
[   15.620310] async_waiting @ 1360
[   15.623540] async_continuing @ 1360 after 0 usec
[   15.800299] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[   15.806323] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[   15.860251] ata2.01: configured for UDMA/33
[   15.875113] async_waiting @ 1360
[   15.878342] async_continuing @ 1360 after 0 usec
[   15.880431] scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
[   15.890018] device: 'target1:0:1': device_add
[   15.894387] device: '1:0:1:0': device_add
[   15.898442] bus: 'scsi': add device 1:0:1:0
[   15.911921] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd
[   15.919566] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0
[   15.920033] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr
[   15.930005] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0
[   15.944171] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[   15.950089] Uniform CD-ROM driver Revision: 3.20
[   15.954799] device: 'sr0': device_add
[   15.970664] device: '11:0': device_add
[   15.974976] sr 1:0:1:0: Attached scsi CD-ROM sr0
[   15.979590] driver: '1:0:1:0': driver_bound: bound to device 'sr'
[   15.980030] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr
[   15.990008] device: '1:0:1:0': device_add
[   15.994476] device: 'sg1': device_add
[   16.011019] sr 1:0:1:0: Attached scsi generic sg1 type 5
[   16.016337] device: '1:0:1:0': device_add
[   16.032231] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd'
[   16.039304] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd
[   16.051101] initcall amd_init+0x0/0x42 returned 0 after 1005859 usecs
[   16.057540] calling  artop_init+0x0/0x42 @ 1
[   16.060030] bus: 'pci': add driver pata_artop
[   16.074802] initcall artop_init+0x0/0x42 returned 0 after 9765 usecs
[   16.080011] calling  cmd640_init+0x0/0x42 @ 1
[   16.084365] bus: 'pci': add driver pata_cmd640
[   16.092518] initcall cmd640_init+0x0/0x42 returned 0 after 9765 usecs
[   16.098955] calling  cmd64x_init+0x0/0x42 @ 1
[   16.100009] bus: 'pci': add driver pata_cmd64x
[   16.114910] initcall cmd64x_init+0x0/0x42 returned 0 after 9765 usecs
[   16.120008] calling  cs5520_init+0x0/0x42 @ 1
[   16.124366] bus: 'pci': add driver pata_cs5520
[   16.141108] initcall cs5520_init+0x0/0x42 returned 0 after 19531 usecs
[   16.147629] calling  cy82c693_init+0x0/0x42 @ 1
[   16.150030] bus: 'pci': add driver pata_cypress
[   16.165147] initcall cy82c693_init+0x0/0x42 returned 0 after 9765 usecs
[   16.170007] calling  hpt36x_init+0x0/0x42 @ 1
[   16.174365] bus: 'pci': add driver pata_hpt366
[   16.190432] initcall hpt36x_init+0x0/0x42 returned 0 after 19531 usecs
[   16.196952] calling  hpt37x_init+0x0/0x42 @ 1
[   16.200007] bus: 'pci': add driver pata_hpt37x
[   16.215004] initcall hpt37x_init+0x0/0x42 returned 0 after 9765 usecs
[   16.220007] calling  hpt3x3_init+0x0/0x42 @ 1
[   16.224365] bus: 'pci': add driver pata_hpt3x3
[   16.242184] initcall hpt3x3_init+0x0/0x42 returned 0 after 19531 usecs
[   16.248706] calling  it8213_init+0x0/0x42 @ 1
[   16.250013] bus: 'pci': add driver pata_it8213
[   16.264853] initcall it8213_init+0x0/0x42 returned 0 after 9765 usecs
[   16.270010] calling  jmicron_init+0x0/0x42 @ 1
[   16.274453] bus: 'pci': add driver pata_jmicron
[   16.291973] initcall jmicron_init+0x0/0x42 returned 0 after 19531 usecs
[   16.298583] calling  ninja32_init+0x0/0x42 @ 1
[   16.300008] bus: 'pci': add driver pata_ninja32
[   16.314946] initcall ninja32_init+0x0/0x42 returned 0 after 9765 usecs
[   16.320012] calling  ns87410_init+0x0/0x42 @ 1
[   16.324451] bus: 'pci': add driver pata_ns87410
[   16.340961] initcall ns87410_init+0x0/0x42 returned 0 after 19531 usecs
[   16.347564] calling  ns87415_init+0x0/0x42 @ 1
[   16.350013] bus: 'pci': add driver pata_ns87415
[   16.364940] initcall ns87415_init+0x0/0x42 returned 0 after 9765 usecs
[   16.370008] calling  opti_init+0x0/0x42 @ 1
[   16.374194] bus: 'pci': add driver pata_opti
[   16.390368] initcall opti_init+0x0/0x42 returned 0 after 19531 usecs
[   16.396714] calling  optidma_init+0x0/0x42 @ 1
[   16.400009] bus: 'pci': add driver pata_optidma
[   16.415069] initcall optidma_init+0x0/0x42 returned 0 after 9765 usecs
[   16.420029] calling  marvell_init+0x0/0x42 @ 1
[   16.424471] bus: 'pci': add driver pata_marvell
[   16.441598] initcall marvell_init+0x0/0x42 returned 0 after 19531 usecs
[   16.448200] calling  mpiix_init+0x0/0x42 @ 1
[   16.450008] bus: 'pci': add driver pata_mpiix
[   16.464783] initcall mpiix_init+0x0/0x42 returned 0 after 9765 usecs
[   16.470007] calling  oldpiix_init+0x0/0x42 @ 1
[   16.474451] bus: 'pci': add driver pata_oldpiix
[   16.490954] initcall oldpiix_init+0x0/0x42 returned 0 after 19531 usecs
[   16.497558] calling  pdc2027x_init+0x0/0x42 @ 1
[   16.500008] bus: 'pci': add driver pata_pdc2027x
[   16.515026] initcall pdc2027x_init+0x0/0x42 returned 0 after 9765 usecs
[   16.520029] calling  pdc202xx_init+0x0/0x42 @ 1
[   16.524558] bus: 'pci': add driver pata_pdc202xx_old
[   16.540625] initcall pdc202xx_init+0x0/0x42 returned 0 after 19531 usecs
[   16.547322] calling  sc1200_init+0x0/0x42 @ 1
[   16.550012] bus: 'pci': add driver sc1200
[   16.564438] initcall sc1200_init+0x0/0x42 returned 0 after 9765 usecs
[   16.570013] calling  serverworks_init+0x0/0x42 @ 1
[   16.574799] bus: 'pci': add driver pata_serverworks
[   16.590974] initcall serverworks_init+0x0/0x42 returned 0 after 19531 usecs
[   16.597924] calling  via_init+0x0/0x42 @ 1
[   16.600009] bus: 'pci': add driver pata_via
[   16.614600] initcall via_init+0x0/0x42 returned 0 after 9765 usecs
[   16.620029] calling  sl82c105_init+0x0/0x42 @ 1
[   16.624556] bus: 'pci': add driver pata_sl82c105
[   16.641839] initcall sl82c105_init+0x0/0x42 returned 0 after 19531 usecs
[   16.648529] calling  sis_init+0x0/0x42 @ 1
[   16.650009] bus: 'pci': add driver pata_sis
[   16.664603] initcall sis_init+0x0/0x42 returned 0 after 9765 usecs
[   16.670008] calling  triflex_init+0x0/0x42 @ 1
[   16.674452] bus: 'pci': add driver pata_triflex
[   16.689405] initcall triflex_init+0x0/0x42 returned 0 after 9765 usecs
[   16.690012] calling  sch_init+0x0/0x42 @ 1
[   16.700005] bus: 'pci': add driver pata_sch
[   16.714591] initcall sch_init+0x0/0x42 returned 0 after 9765 usecs
[   16.720012] calling  pata_platform_init+0x0/0x39 @ 1
[   16.724971] bus: 'platform': add driver pata_platform
[   16.741084] initcall pata_platform_init+0x0/0x39 returned 0 after 19531 usecs
[   16.748211] calling  e1000_init_module+0x0/0xab @ 1
[   16.750006] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[   16.756442] Copyright (c) 1999-2006 Intel Corporation.
[   16.760005] bus: 'pci': add driver e1000
[   16.774336] initcall e1000_init_module+0x0/0xab returned 0 after 19531 usecs
[   16.780008] calling  e1000_init_module+0x0/0x8f @ 1
[   16.784883] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[   16.790003] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[   16.795831] bus: 'pci': add driver e1000e
[   16.810833] initcall e1000_init_module+0x0/0x8f returned 0 after 29296 usecs
[   16.817873] calling  igb_init_module+0x0/0x7b @ 1
[   16.820009] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[   16.826701] Copyright (c) 2007-2009 Intel Corporation.
[   16.830009] bus: 'pci': add driver igb
[   16.844353] initcall igb_init_module+0x0/0x7b returned 0 after 19531 usecs
[   16.850006] calling  ixgbe_init_module+0x0/0x7f @ 1
[   16.854881] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.34-k2
[   16.860003] ixgbe: Copyright (c) 1999-2009 Intel Corporation.
[   16.865743] bus: 'pci': add driver ixgbe
[   16.883031] initcall ixgbe_init_module+0x0/0x7f returned 0 after 29296 usecs
[   16.890011] calling  ixgb_init_module+0x0/0x71 @ 1
[   16.894796] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   16.900002] Copyright (c) 1999-2008 Intel Corporation.
[   16.905138] bus: 'pci': add driver ixgb
[   16.921260] initcall ixgb_init_module+0x0/0x71 returned 0 after 29296 usecs
[   16.928214] calling  t1_init_module+0x0/0x42 @ 1
[   16.930009] bus: 'pci': add driver cxgb
[   16.944492] initcall t1_init_module+0x0/0x42 returned 0 after 9765 usecs
[   16.950006] calling  cxgb3_init_module+0x0/0x47 @ 1
[   16.954886] bus: 'pci': add driver cxgb3
[   16.970473] initcall cxgb3_init_module+0x0/0x47 returned 0 after 19531 usecs
[   16.977510] calling  vcan_init_module+0x0/0x5c @ 1
[   16.980008] vcan: Virtual CAN interface driver
[   16.984454] initcall vcan_init_module+0x0/0x5c returned 0 after 0 usecs
[   16.990004] calling  can_dev_init+0x0/0x55 @ 1
[   16.994443] CAN device driver interface
[   17.000004] initcall can_dev_init+0x0/0x55 returned 0 after 9765 usecs
[   17.006522] calling  atl1_init_module+0x0/0x42 @ 1
[   17.010027] bus: 'pci': add driver atl1
[   17.024333] initcall atl1_init_module+0x0/0x42 returned 0 after 9765 usecs
[   17.030013] calling  atl2_init_module+0x0/0x71 @ 1
[   17.034798] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   17.040009] Copyright (c) 2007 Atheros Corporation.
[   17.044884] bus: 'pci': add driver atl2
[   17.061098] initcall atl2_init_module+0x0/0x71 returned 0 after 29296 usecs
[   17.068049] calling  atl1e_init_module+0x0/0x42 @ 1
[   17.070005] bus: 'pci': add driver ATL1E
[   17.084518] initcall atl1e_init_module+0x0/0x42 returned 0 after 9765 usecs
[   17.090008] calling  bdx_module_init+0x0/0xb0 @ 1
[   17.094709] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[   17.100002] tehuti: Options: hw_csum 
[   17.103663] bus: 'pci': add driver tehuti
[   17.118811] initcall bdx_module_init+0x0/0xb0 returned 0 after 19531 usecs
[   17.120004] calling  enic_init_module+0x0/0x5c @ 1
[   17.130005] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933
[   17.135484] bus: 'pci': add driver enic
[   17.149900] initcall enic_init_module+0x0/0x5c returned 0 after 9765 usecs
[   17.150027] calling  plip_init+0x0/0x84 @ 1
[   17.160024] plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
[   17.168031] device: 'plip0': device_add
[   17.182739] NET3 PLIP version 2.4-parport [email protected]
[   17.188218] plip0: Parallel port at 0x378, not using IRQ.
[   17.190006] initcall plip_init+0x0/0x84 returned 0 after 29296 usecs
[   17.196348] calling  happy_meal_probe+0x0/0x42 @ 1
[   17.200006] bus: 'pci': add driver hme
[   17.214277] initcall happy_meal_probe+0x0/0x42 returned 0 after 9765 usecs
[   17.220008] calling  gem_init+0x0/0x42 @ 1
[   17.224104] bus: 'pci': add driver gem
[   17.238427] initcall gem_init+0x0/0x42 returned 0 after 9765 usecs
[   17.240009] calling  cas_init+0x0/0x61 @ 1
[   17.244106] bus: 'pci': add driver cassini
[   17.261348] initcall cas_init+0x0/0x61 returned 0 after 19531 usecs
[   17.267604] calling  vortex_init+0x0/0xd8 @ 1
[   17.270010] bus: 'pci': add driver 3c59x
[   17.284526] initcall vortex_init+0x0/0xd8 returned 0 after 9765 usecs
[   17.290026] calling  typhoon_init+0x0/0x42 @ 1
[   17.294470] bus: 'pci': add driver typhoon
[   17.309213] initcall typhoon_init+0x0/0x42 returned 0 after 9765 usecs
[   17.310004] calling  ne2k_pci_init+0x0/0x42 @ 1
[   17.320005] bus: 'pci': add driver ne2k-pci
[   17.334753] initcall ne2k_pci_init+0x0/0x42 returned 0 after 9765 usecs
[   17.340004] calling  pcnet32_init_module+0x0/0x154 @ 1
[   17.345135] pcnet32.c:v1.35 21.Apr.2008 [email protected]
[   17.350008] bus: 'pci': add driver pcnet32
[   17.364651] initcall pcnet32_init_module+0x0/0x154 returned 0 after 19531 usecs
[   17.370004] calling  e100_init_module+0x0/0x81 @ 1
[   17.374787] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   17.380006] e100: Copyright(c) 1999-2006 Intel Corporation
[   17.385485] bus: 'pci': add driver e100
[   17.401336] initcall e100_init_module+0x0/0x81 returned 0 after 29296 usecs
[   17.408290] calling  tlan_probe+0x0/0x108 @ 1
[   17.410006] ThunderLAN driver v1.15a
[   17.413577] bus: 'pci': add driver tlan
[   17.430938] TLAN: 0 devices installed, PCI: 0  EISA: 0
[   17.436101] bus: 'pci': remove driver tlan
[   17.451223] driver: 'tlan': driver_release
[   17.455321] initcall tlan_probe+0x0/0x108 returned -19 after 39062 usecs
[   17.460004] calling  smsc9420_init_module+0x0/0x64 @ 1
[   17.465137] bus: 'pci': add driver smsc9420
[   17.481487] initcall smsc9420_init_module+0x0/0x64 returned 0 after 19531 usecs
[   17.488791] calling  sis190_init_module+0x0/0x42 @ 1
[   17.490011] bus: 'pci': add driver sis190
[   17.504715] initcall sis190_init_module+0x0/0x42 returned 0 after 9765 usecs
[   17.510008] calling  r6040_init+0x0/0x42 @ 1
[   17.514278] bus: 'pci': add driver r6040
[   17.530686] initcall r6040_init+0x0/0x42 returned 0 after 19531 usecs
[   17.537117] calling  yellowfin_init+0x0/0x42 @ 1
[   17.540006] bus: 'pci': add driver yellowfin
[   17.555044] initcall yellowfin_init+0x0/0x42 returned 0 after 9765 usecs
[   17.560026] calling  acenic_init+0x0/0x42 @ 1
[   17.564384] bus: 'pci': add driver acenic
[   17.581320] initcall acenic_init+0x0/0x42 returned 0 after 19531 usecs
[   17.587843] calling  ns83820_init+0x0/0x4e @ 1
[   17.590003] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[   17.596782] bus: 'pci': add driver ns83820
[   17.612402] initcall ns83820_init+0x0/0x4e returned 0 after 19531 usecs
[   17.619007] calling  fealnx_init+0x0/0x42 @ 1
[   17.620010] bus: 'pci': add driver fealnx
[   17.634614] initcall fealnx_init+0x0/0x42 returned 0 after 9765 usecs
[   17.640009] calling  tg3_init+0x0/0x42 @ 1
[   17.644106] bus: 'pci': add driver tg3
[   17.658455] initcall tg3_init+0x0/0x42 returned 0 after 9765 usecs
[   17.660005] calling  bnx2x_init+0x0/0xa8 @ 1
[   17.664387] bus: 'pci': add driver bnx2x
[   17.670272] initcall bnx2x_init+0x0/0xa8 returned 0 after 9765 usecs
[   17.676616] calling  skge_init_module+0x0/0x42 @ 1
[   17.680029] bus: 'pci': add driver skge
[   17.694662] initcall skge_init_module+0x0/0x42 returned 0 after 9765 usecs
[   17.700022] calling  sky2_init_module+0x0/0x4e @ 1
[   17.704805] sky2 driver version 1.23
[   17.708383] bus: 'pci': add driver sky2
[   17.720697] initcall sky2_init_module+0x0/0x4e returned 0 after 19531 usecs
[   17.727652] calling  ks8851_init+0x0/0x39 @ 1
[   17.730010] bus: 'spi': add driver ks8851
[   17.744456] initcall ks8851_init+0x0/0x39 returned 0 after 9765 usecs
[   17.750026] calling  rhine_init+0x0/0x5e @ 1
[   17.754296] bus: 'pci': add driver via-rhine
[   17.769167] initcall rhine_init+0x0/0x5e returned 0 after 9765 usecs
[   17.770005] calling  velocity_init_module+0x0/0x42 @ 1
[   17.780005] bus: 'pci': add driver via-velocity
[   17.795092] initcall velocity_init_module+0x0/0x42 returned 0 after 9765 usecs
[   17.800004] calling  starfire_init+0x0/0x42 @ 1
[   17.804531] bus: 'pci': add driver starfire
[   17.820968] initcall starfire_init+0x0/0x42 returned 0 after 19531 usecs
[   17.827663] calling  marvell_init+0x0/0x84 @ 1
[   17.830029] bus: 'mdio_bus': add driver Marvell 88E1101
[   17.845786] bus: 'mdio_bus': add driver Marvell 88E1112
[   17.861869] bus: 'mdio_bus': add driver Marvell 88E1111
[   17.867310] bus: 'mdio_bus': add driver Marvell 88E1118
[   17.881776] bus: 'mdio_bus': add driver Marvell 88E1121R
[   17.887311] bus: 'mdio_bus': add driver Marvell 88E1145
[   17.900786] bus: 'mdio_bus': add driver Marvell 88E1240
[   17.906235] initcall marvell_init+0x0/0x84 returned 0 after 68359 usecs
[   17.910024] calling  davicom_init+0x0/0x83 @ 1
[   17.914466] bus: 'mdio_bus': add driver Davicom DM9161E
[   17.930745] bus: 'mdio_bus': add driver Davicom DM9161A
[   17.936187] bus: 'mdio_bus': add driver Davicom DM9131
[   17.951200] initcall davicom_init+0x0/0x83 returned 0 after 39062 usecs
[   17.957808] calling  cicada_init+0x0/0x65 @ 1
[   17.960025] bus: 'mdio_bus': add driver Cicada Cis8204
[   17.975550] bus: 'mdio_bus': add driver Cicada Cis8201
[   17.990396] initcall cicada_init+0x0/0x65 returned 0 after 29296 usecs
[   17.996914] calling  qs6612_init+0x0/0x39 @ 1
[   18.000004] bus: 'mdio_bus': add driver QS6612
[   18.014841] initcall qs6612_init+0x0/0x39 returned 0 after 9765 usecs
[   18.020005] calling  smsc_init+0x0/0xbf @ 1
[   18.024183] bus: 'mdio_bus': add driver SMSC LAN83C185
[   18.041405] bus: 'mdio_bus': add driver SMSC LAN8187
[   18.046626] bus: 'mdio_bus': add driver SMSC LAN8700
[   18.060595] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[   18.066896] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[   18.081363] initcall smsc_init+0x0/0xbf returned 0 after 58593 usecs
[   18.087711] calling  vsc82xx_init+0x0/0x65 @ 1
[   18.090021] bus: 'mdio_bus': add driver Vitesse VSC8244
[   18.105657] bus: 'mdio_bus': add driver Vitesse VSC8221
[   18.120475] initcall vsc82xx_init+0x0/0x65 returned 0 after 29296 usecs
[   18.127085] calling  broadcom_init+0x0/0x125 @ 1
[   18.130010] bus: 'mdio_bus': add driver Broadcom BCM5411
[   18.145697] bus: 'mdio_bus': add driver Broadcom BCM5421
[   18.160543] bus: 'mdio_bus': add driver Broadcom BCM5461
[   18.166075] bus: 'mdio_bus': add driver Broadcom BCM5464
[   18.181715] bus: 'mdio_bus': add driver Broadcom BCM5481
[   18.187258] bus: 'mdio_bus': add driver Broadcom BCM5482
[   18.201082] bus: 'mdio_bus': add driver Broadcom BCM50610
[   18.206698] bus: 'mdio_bus': add driver Broadcom BCM57780
[   18.221151] initcall broadcom_init+0x0/0x125 returned 0 after 87890 usecs
[   18.227927] calling  ip175c_init+0x0/0x39 @ 1
[   18.230023] bus: 'mdio_bus': add driver ICPlus IP175C
[   18.245650] initcall ip175c_init+0x0/0x39 returned 0 after 9765 usecs
[   18.250026] calling  et1011c_init+0x0/0x39 @ 1
[   18.254468] bus: 'mdio_bus': add driver ET1011C
[   18.271408] initcall et1011c_init+0x0/0x39 returned 0 after 19531 usecs
[   18.278019] calling  fixed_mdio_bus_init+0x0/0xf6 @ 1
[   18.280009] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[   18.290005] device: 'Fixed MDIO bus.0': device_add
[   18.294798] bus: 'platform': add device Fixed MDIO bus.0
[   18.311411] device: '0': device_add
[   18.315178] Fixed MDIO Bus: probed
[   18.318580] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 29296 usecs
[   18.320032] calling  ns_init+0x0/0x39 @ 1
[   18.324043] bus: 'mdio_bus': add driver NatSemi DP83865
[   18.341561] initcall ns_init+0x0/0x39 returned 0 after 19531 usecs
[   18.347733] calling  ste10Xp_init+0x0/0x49 @ 1
[   18.350023] bus: 'mdio_bus': add driver STe100p
[   18.364935] bus: 'mdio_bus': add driver STe101p
[   18.369677] initcall ste10Xp_init+0x0/0x49 returned 0 after 9765 usecs
[   18.370027] calling  sundance_init+0x0/0x42 @ 1
[   18.380011] bus: 'pci': add driver sundance
[   18.394811] initcall sundance_init+0x0/0x42 returned 0 after 9765 usecs
[   18.400022] calling  hamachi_init+0x0/0x42 @ 1
[   18.404462] bus: 'pci': add driver hamachi
[   18.410236] initcall hamachi_init+0x0/0x42 returned 0 after 9765 usecs
[   18.416754] calling  net_olddevs_init+0x0/0xc7 @ 1
[   18.420040] D-Link DE-620 pocket adapter io 0x378, which is busy.
[   18.426159] initcall net_olddevs_init+0x0/0xc7 returned 0 after 0 usecs
[   18.430011] calling  hp100_module_init+0x0/0x42 @ 1
[   18.434888] bus: 'pci': add driver hp100
[   18.450854] initcall hp100_module_init+0x0/0x42 returned 0 after 19531 usecs
[   18.457894] calling  b44_init+0x0/0x89 @ 1
[   18.460030] bus: 'pci': add driver b44
[   18.474362] bus: 'ssb': add driver b44
[   18.478337] initcall b44_init+0x0/0x89 returned 0 after 9765 usecs
[   18.480027] calling  init_nic+0x0/0x42 @ 1
[   18.484123] bus: 'pci': add driver forcedeth
[   18.490024] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth
[   18.500003] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0
[   18.508124] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   18.510134] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
[   18.520009] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[   18.530008] forcedeth 0000:00:0a.0: setting latency timer to 64
[   18.535986] nv_probe: set workaround bit for reversed mac addr
[   19.070247] device: 'eth0': device_add
[   19.075056] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[   19.080031] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[   19.086409] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth'
[   19.090071] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth
[   19.110984] initcall init_nic+0x0/0x42 returned 0 after 615234 usecs
[   19.117330] calling  ql3xxx_init_module+0x0/0x42 @ 1
[   19.120037] bus: 'pci': add driver qla3xxx
[   19.134597] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 9765 usecs
[   19.140022] calling  qlge_init_module+0x0/0x42 @ 1
[   19.144809] bus: 'pci': add driver qlge
[   19.162653] initcall qlge_init_module+0x0/0x42 returned 0 after 19531 usecs
[   19.169606] calling  ppp_init+0x0/0x104 @ 1
[   19.170002] PPP generic driver version 2.4.2
[   19.174346] device class 'ppp': registering
[   19.190604] device: 'ppp': device_add
[   19.194545] initcall ppp_init+0x0/0x104 returned 0 after 19531 usecs
[   19.200028] calling  ppp_sync_init+0x0/0x5c @ 1
[   19.204555] initcall ppp_sync_init+0x0/0x5c returned 0 after 0 usecs
[   19.210008] calling  deflate_init+0x0/0x61 @ 1
[   19.214463] PPP Deflate Compression module registered
[   19.220006] initcall deflate_init+0x0/0x61 returned 0 after 9765 usecs
[   19.226521] calling  bsdcomp_init+0x0/0x55 @ 1
[   19.230006] PPP BSD Compression module registered
[   19.234704] initcall bsdcomp_init+0x0/0x55 returned 0 after 0 usecs
[   19.240020] calling  ppp_mppe_init+0x0/0x10d @ 1
[   19.255352] PPP MPPE Compression module registered
[   19.260025] initcall ppp_mppe_init+0x0/0x10d returned 0 after 19531 usecs
[   19.266808] calling  pppox_init+0x0/0x39 @ 1
[   19.270003] NET: Registered protocol family 24
[   19.274443] initcall pppox_init+0x0/0x39 returned 0 after 0 usecs
[   19.280004] calling  pppoe_init+0x0/0xaf @ 1
[   19.284295] initcall pppoe_init+0x0/0xaf returned 0 after 0 usecs
[   19.290004] calling  pppol2tp_init+0x0/0xa8 @ 1
[   19.294540] PPPoL2TP kernel driver, V1.0
[   19.300020] initcall pppol2tp_init+0x0/0xa8 returned 0 after 9765 usecs
[   19.306624] calling  slip_init+0x0/0xe6 @ 1
[   19.310003] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[   19.320002] CSLIP: code copyright 1989 Regents of the University of California.
[   19.327299] SLIP linefill/keepalive option.
[   19.330057] initcall slip_init+0x0/0xe6 returned 0 after 19531 usecs
[   19.336401] calling  macvlan_init_module+0x0/0x79 @ 1
[   19.340022] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs
[   19.350004] calling  de600_init+0x0/0x2f2 @ 1
[   19.354370] DE600: port 0x378 busy
[   19.357776] initcall de600_init+0x0/0x2f2 returned -16 after 0 usecs
[   19.360004] initcall de600_init+0x0/0x2f2 returned with error code -16 
[   19.370008] calling  cp_init+0x0/0x42 @ 1
[   19.374025] bus: 'pci': add driver 8139cp
[   19.378069] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139cp
[   19.380018] bus: 'pci': really_probe: probing driver 8139cp with device 0000:05:07.0
[   19.390120] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.400026] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   19.410302] initcall cp_init+0x0/0x42 returned 0 after 39062 usecs
[   19.416479] calling  rtl8139_init_module+0x0/0x42 @ 1
[   19.420028] bus: 'pci': add driver 8139too
[   19.424147] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too
[   19.430006] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0
[   19.440102] 8139too Fast Ethernet driver 0.9.28
[   19.444662] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[   19.450412] device: 'eth1': device_add
[   19.460574] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
[   19.467124] driver: '0000:05:07.0': driver_bound: bound to device '8139too'
[   19.470071] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too
[   19.491790] initcall rtl8139_init_module+0x0/0x42 returned 0 after 68359 usecs
[   19.499002] calling  atp_init_module+0x0/0xbf @ 1
[   19.500030] atp.c:v1.09=ac 2002/10/01 Donald Becker <[email protected]>
[   19.510035] initcall atp_init_module+0x0/0xbf returned -19 after 9765 usecs
[   19.516988] calling  sc92031_init+0x0/0x42 @ 1
[   19.520009] bus: 'pci': add driver sc92031
[   19.534723] initcall sc92031_init+0x0/0x42 returned 0 after 9765 usecs
[   19.540022] calling  eql_init_module+0x0/0x89 @ 1
[   19.544718] Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected])
[   19.550021] device: 'eql': device_add
[   19.564971] initcall eql_init_module+0x0/0x89 returned 0 after 19531 usecs
[   19.570004] calling  tun_init+0x0/0xb7 @ 1
[   19.574094] tun: Universal TUN/TAP device driver, 1.6
[   19.580003] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   19.586182] device: 'tun': device_add
[   19.601596] initcall tun_init+0x0/0xb7 returned 0 after 29296 usecs
[   19.607855] calling  veth_init+0x0/0x39 @ 1
[   19.610008] initcall veth_init+0x0/0x39 returned 0 after 0 usecs
[   19.616011] calling  rio_init+0x0/0x42 @ 1
[   19.620007] bus: 'pci': add driver dl2k
[   19.634361] initcall rio_init+0x0/0x42 returned 0 after 9765 usecs
[   19.640005] calling  rtl8169_init_module+0x0/0x42 @ 1
[   19.645051] bus: 'pci': add driver r8169
[   19.659473] initcall rtl8169_init_module+0x0/0x42 returned 0 after 9765 usecs
[   19.660004] calling  amd8111e_init+0x0/0x42 @ 1
[   19.670006] bus: 'pci': add driver amd8111e
[   19.684813] initcall amd8111e_init+0x0/0x42 returned 0 after 9765 usecs
[   19.690004] calling  myri10ge_init_module+0x0/0x99 @ 1
[   19.695135] myri10ge: Version 1.5.0-1.418
[   19.700006] bus: 'pci': add driver myri10ge
[   19.714774] initcall myri10ge_init_module+0x0/0x99 returned 0 after 19531 usecs
[   19.720010] calling  mlx4_init+0x0/0xcb @ 1
[   19.725249] bus: 'pci': add driver mlx4_core
[   19.742084] initcall mlx4_init+0x0/0xcb returned 0 after 19531 usecs
[   19.748434] calling  mlx4_en_init+0x0/0x39 @ 1
[   19.750045] initcall mlx4_en_init+0x0/0x39 returned 0 after 0 usecs
[   19.756304] calling  enc28j60_init+0x0/0x4a @ 1
[   19.760005] bus: 'spi': add driver enc28j60
[   19.774953] initcall enc28j60_init+0x0/0x4a returned 0 after 9765 usecs
[   19.780004] calling  ethoc_init+0x0/0x39 @ 1
[   19.784270] bus: 'platform': add driver ethoc
[   19.800902] initcall ethoc_init+0x0/0x39 returned 0 after 19531 usecs
[   19.807333] calling  dnet_init+0x0/0x39 @ 1
[   19.810004] bus: 'platform': add driver dnet
[   19.824913] initcall dnet_init+0x0/0x39 returned 0 after 9765 usecs
[   19.830010] calling  hdlc_module_init+0x0/0x66 @ 1
[   19.834795] HDLC support module revision 1.22
[   19.840009] initcall hdlc_module_init+0x0/0x66 returned 0 after 9765 usecs
[   19.846874] calling  mod_init+0x0/0x3b @ 1
[   19.850005] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[   19.855916] calling  mod_init+0x0/0x3b @ 1
[   19.860005] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[   19.865914] calling  mod_init+0x0/0x3b @ 1
[   19.870027] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[   19.875941] calling  fst_init+0x0/0x76 @ 1
[   19.880008] bus: 'pci': add driver fst
[   19.894429] initcall fst_init+0x0/0x76 returned 0 after 9765 usecs
[   19.900005] calling  pci200_init_module+0x0/0x69 @ 1
[   19.904970] bus: 'pci': add driver PCI200SYN
[   19.921761] initcall pci200_init_module+0x0/0x69 returned 0 after 19531 usecs
[   19.928890] calling  pc300_init_module+0x0/0x8c @ 1
[   19.930014] bus: 'pci': add driver PC300
[   19.944445] initcall pc300_init_module+0x0/0x8c returned 0 after 9765 usecs
[   19.950008] calling  arcnet_init+0x0/0x84 @ 1
[   19.954364] arcnet loaded.
[   19.957074] initcall arcnet_init+0x0/0x84 returned 0 after 0 usecs
[   19.960003] calling  arcnet_rfc1201_init+0x0/0x98 @ 1
[   19.965047] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[   19.970003] initcall arcnet_rfc1201_init+0x0/0x98 returned 0 after 9765 usecs
[   19.980003] calling  arcnet_raw_init+0x0/0x80 @ 1
[   19.984700] arcnet: raw mode (`r') encapsulation support loaded.
[   19.990026] initcall arcnet_raw_init+0x0/0x80 returned 0 after 9765 usecs
[   20.000003] calling  com90io_init+0x0/0x4d4 @ 1
[   20.004567] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[   20.010002] E-mail me if you actually test this driver, please!
[   20.015913]  arc%d: No autoprobe for IO mapped cards; you must specify the base address!
[   20.020023] initcall com90io_init+0x0/0x4d4 returned -19 after 19531 usecs
[   20.030021] calling  arc_rimi_init+0x0/0x4f2 @ 1
[   20.034666] arcnet: RIM I (entirely mem-mapped) support
[   20.040011] E-mail me if you actually test the RIM I driver, please!
[   20.050003]  arc%d: Given: node 00h, shmem 0h, irq 0
[   20.054962]  arc%d: No autoprobe for RIM I; you must specify the shmem and irq!
[   20.060022] initcall arc_rimi_init+0x0/0x4f2 returned -5 after 29296 usecs
[   20.066885] initcall arc_rimi_init+0x0/0x4f2 returned with error code -5 
[   20.070019] calling  com20020pci_init+0x0/0x57 @ 1
[   20.080002] arcnet: COM20020 PCI support
[   20.083925] bus: 'pci': add driver com20020
[   20.098694] initcall com20020pci_init+0x0/0x57 returned 0 after 9765 usecs
[   20.100009] calling  catc_init+0x0/0x5e @ 1
[   20.104192] bus: 'usb': add driver catc
[   20.121196] usbcore: registered new interface driver catc
[   20.126594] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   20.130006] initcall catc_init+0x0/0x5e returned 0 after 29296 usecs
[   20.136356] calling  kaweth_init+0x0/0x42 @ 1
[   20.140003] bus: 'usb': add driver kaweth
[   20.154771] usbcore: registered new interface driver kaweth
[   20.160008] initcall kaweth_init+0x0/0x42 returned 0 after 19531 usecs
[   20.166530] calling  pegasus_init+0x0/0x18d @ 1
[   20.170003] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[   20.177474] bus: 'usb': add driver pegasus
[   20.191608] usbcore: registered new interface driver pegasus
[   20.197272] initcall pegasus_init+0x0/0x18d returned 0 after 19531 usecs
[   20.200004] calling  usb_rtl8150_init+0x0/0x4e @ 1
[   20.204787] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   20.210003] bus: 'usb': add driver rtl8150
[   20.224668] usbcore: registered new interface driver rtl8150
[   20.230010] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 29296 usecs
[   20.236961] calling  hso_init+0x0/0x1ce @ 1
[   20.240003] hso: drivers/net/usb/hso.c: 1.2 Option Wireless
[   20.245595] bus: 'usb': add driver hso
[   20.261984] usbcore: registered new interface driver hso
[   20.267296] initcall hso_init+0x0/0x1ce returned 0 after 19531 usecs
[   20.270004] calling  asix_init+0x0/0x42 @ 1
[   20.274182] bus: 'usb': add driver asix
[   20.290989] usbcore: registered new interface driver asix
[   20.296391] initcall asix_init+0x0/0x42 returned 0 after 19531 usecs
[   20.300003] calling  cdc_init+0x0/0x42 @ 1
[   20.304097] bus: 'usb': add driver cdc_ether
[   20.322061] usbcore: registered new interface driver cdc_ether
[   20.327893] initcall cdc_init+0x0/0x42 returned 0 after 19531 usecs
[   20.330006] calling  eem_init+0x0/0x42 @ 1
[   20.334097] bus: 'usb': add driver cdc_eem
[   20.352334] usbcore: registered new interface driver cdc_eem
[   20.357999] initcall eem_init+0x0/0x42 returned 0 after 19531 usecs
[   20.360004] calling  dm9601_init+0x0/0x42 @ 1
[   20.364354] bus: 'usb': add driver dm9601
[   20.381143] usbcore: registered new interface driver dm9601
[   20.386713] initcall dm9601_init+0x0/0x42 returned 0 after 19531 usecs
[   20.390004] calling  smsc95xx_init+0x0/0x42 @ 1
[   20.394529] bus: 'usb': add driver smsc95xx
[   20.410891] usbcore: registered new interface driver smsc95xx
[   20.416637] initcall smsc95xx_init+0x0/0x42 returned 0 after 19531 usecs
[   20.420004] calling  usbnet_init+0x0/0x42 @ 1
[   20.424354] bus: 'usb': add driver gl620a
[   20.441793] usbcore: registered new interface driver gl620a
[   20.447361] initcall usbnet_init+0x0/0x42 returned 0 after 19531 usecs
[   20.450004] calling  net1080_init+0x0/0x42 @ 1
[   20.454441] bus: 'usb': add driver net1080
[   20.471106] usbcore: registered new interface driver net1080
[   20.476767] initcall net1080_init+0x0/0x42 returned 0 after 19531 usecs
[   20.480004] calling  plusb_init+0x0/0x42 @ 1
[   20.484268] bus: 'usb': add driver plusb
[   20.501569] usbcore: registered new interface driver plusb
[   20.507056] initcall plusb_init+0x0/0x42 returned 0 after 19531 usecs
[   20.510004] calling  rndis_init+0x0/0x42 @ 1
[   20.514269] bus: 'usb': add driver rndis_host
[   20.530631] usbcore: registered new interface driver rndis_host
[   20.536549] initcall rndis_init+0x0/0x42 returned 0 after 19531 usecs
[   20.540004] calling  cdc_subset_init+0x0/0x42 @ 1
[   20.544701] bus: 'usb': add driver cdc_subset
[   20.560807] usbcore: registered new interface driver cdc_subset
[   20.566726] initcall cdc_subset_init+0x0/0x42 returned 0 after 19531 usecs
[   20.570004] calling  zaurus_init+0x0/0x42 @ 1
[   20.574354] bus: 'usb': add driver zaurus
[   20.591559] usbcore: registered new interface driver zaurus
[   20.597128] initcall zaurus_init+0x0/0x42 returned 0 after 19531 usecs
[   20.600004] calling  mcs7830_init+0x0/0x42 @ 1
[   20.604443] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[   20.622315] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   20.629704] initcall mcs7830_init+0x0/0x42 returned 0 after 19531 usecs
[   20.630006] calling  usbnet_init+0x0/0x52 @ 1
[   20.640009] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs
[   20.646182] calling  int51x1_init+0x0/0x42 @ 1
[   20.650003] bus: 'usb': add driver int51x1
[   20.664849] usbcore: registered new interface driver int51x1
[   20.670011] initcall int51x1_init+0x0/0x42 returned 0 after 19531 usecs
[   20.676616] calling  usbpn_init+0x0/0x42 @ 1
[   20.680004] bus: 'usb': add driver cdc_phonet
[   20.695108] usbcore: registered new interface driver cdc_phonet
[   20.700008] initcall usbpn_init+0x0/0x42 returned 0 after 19531 usecs
[   20.706443] calling  ipw2100_init+0x0/0x93 @ 1
[   20.710003] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[   20.716778] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[   20.720009] bus: 'pci': add driver ipw2100
[   20.724349] initcall ipw2100_init+0x0/0x93 returned 0 after 9765 usecs
[   20.730028] calling  ipw_init+0x0/0xad @ 1
[   20.734120] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdq
[   20.740002] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   20.750006] bus: 'pci': add driver ipw2200
[   20.754387] initcall ipw_init+0x0/0xad returned 0 after 19531 usecs
[   20.760005] calling  ieee80211_init+0x0/0x49 @ 1
[   20.764615] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   20.770002] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
[   20.780004] initcall ieee80211_init+0x0/0x49 returned 0 after 19531 usecs
[   20.786782] calling  strip_init_driver+0x0/0x8e @ 1
[   20.790002] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
[   20.800042] initcall strip_init_driver+0x0/0x8e returned 0 after 9765 usecs
[   20.806996] calling  init_orinoco+0x0/0x42 @ 1
[   20.810003] orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
[   20.820003] initcall init_orinoco+0x0/0x42 returned 0 after 9765 usecs
[   20.826521] calling  orinoco_pci_init+0x0/0x55 @ 1
[   20.830005] orinoco_pci 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]> & Jean Tourrilhes <[email protected]>)
[   20.840021] bus: 'pci': add driver orinoco_pci
[   20.850237] initcall orinoco_pci_init+0x0/0x55 returned 0 after 19531 usecs
[   20.857188] calling  airo_init_module+0x0/0x110 @ 1
[   20.860018] airo(): Probing for PCI adapters
[   20.864288] bus: 'pci': add driver airo
[   20.870251] airo(): Finished probing for PCI adapters
[   20.875301] initcall airo_init_module+0x0/0x110 returned 0 after 9765 usecs
[   20.880005] calling  prism54_module_init+0x0/0x5c @ 1
[   20.885047] Loaded prism54 driver, version 1.2
[   20.890006] bus: 'pci': add driver prism54
[   20.894333] initcall prism54_module_init+0x0/0x5c returned 0 after 9765 usecs
[   20.900005] calling  rtl8180_init+0x0/0x42 @ 1
[   20.904442] bus: 'pci': add driver rtl8180
[   20.910238] initcall rtl8180_init+0x0/0x42 returned 0 after 9765 usecs
[   20.916755] calling  rtl8187_init+0x0/0x42 @ 1
[   20.920006] bus: 'usb': add driver rtl8187
[   20.924321] usbcore: registered new interface driver rtl8187
[   20.930014] initcall rtl8187_init+0x0/0x42 returned 0 after 9765 usecs
[   20.936537] calling  rndis_wlan_init+0x0/0x42 @ 1
[   20.940004] bus: 'usb': add driver rndis_wlan
[   20.944565] usbcore: registered new interface driver rndis_wlan
[   20.950009] initcall rndis_wlan_init+0x0/0x42 returned 0 after 9765 usecs
[   20.960004] calling  zd1201_init+0x0/0x42 @ 1
[   20.964354] bus: 'usb': add driver zd1201
[   20.970265] usbcore: registered new interface driver zd1201
[   20.975832] initcall zd1201_init+0x0/0x42 returned 0 after 9765 usecs
[   20.980005] calling  lbs_init_module+0x0/0x5d @ 1
[   20.984728] initcall lbs_init_module+0x0/0x5d returned 0 after 0 usecs
[   20.990004] calling  if_spi_init_module+0x0/0x45 @ 1
[   20.994960] libertas_spi: Libertas SPI driver
[   21.000004] bus: 'spi': add driver libertas_spi
[   21.004735] initcall if_spi_init_module+0x0/0x45 returned 0 after 9765 usecs
[   21.010005] calling  lbtf_init_module+0x0/0x6c @ 1
[   21.014985] initcall lbtf_init_module+0x0/0x6c returned 0 after 0 usecs
[   21.020004] calling  if_usb_init_module+0x0/0x42 @ 1
[   21.030006] bus: 'usb': add driver lbtf_usb
[   21.034401] usbcore: registered new interface driver lbtf_usb
[   21.040015] initcall if_usb_init_module+0x0/0x42 returned 0 after 9765 usecs
[   21.047056] calling  adm8211_init+0x0/0x42 @ 1
[   21.050008] bus: 'pci': add driver adm8211
[   21.054346] initcall adm8211_init+0x0/0x42 returned 0 after 0 usecs
[   21.060005] calling  iwl3945_init+0x0/0x9a @ 1
[   21.064441] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kd
[   21.070002] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   21.080008] bus: 'pci': add driver iwl3945
[   21.084341] initcall iwl3945_init+0x0/0x9a returned 0 after 19531 usecs
[   21.090005] calling  p54p_init+0x0/0x42 @ 1
[   21.094185] bus: 'pci': add driver p54pci
[   21.100251] initcall p54p_init+0x0/0x42 returned 0 after 9765 usecs
[   21.106511] calling  p54spi_init+0x0/0x57 @ 1
[   21.110005] bus: 'spi': add driver cx3110x
[   21.114324] initcall p54spi_init+0x0/0x57 returned 0 after 0 usecs
[   21.120004] calling  ar9170_init+0x0/0x42 @ 1
[   21.124356] bus: 'usb': add driver ar9170usb
[   21.130218] usbcore: registered new interface driver ar9170usb
[   21.136047] initcall ar9170_init+0x0/0x42 returned 0 after 9765 usecs
[   21.140005] calling  init_mac80211_hwsim+0x0/0x535 @ 1
[   21.145134] device class 'mac80211_hwsim': registering
[   21.150219] mac80211_hwsim: Initializing radio 0
[   21.154897] device: 'hwsim0': device_add
[   21.160325] device: 'phy0': device_add
[   21.164316] device: 'rfkill0': device_add
[   21.170892] device: 'wmaster0': device_add
[   21.176092] phy0: Selected rate control algorithm 'pid'
[   21.180181] device: 'wlan0': device_add
[   21.185107] phy0: hwaddr 02:00:00:00:00:00 registered
[   21.190034] mac80211_hwsim: Initializing radio 1
[   21.194744] device: 'hwsim1': device_add
[   21.200224] device: 'phy1': device_add
[   21.204227] device: 'rfkill1': device_add
[   21.210790] device: 'wmaster1': device_add
[   21.216080] phy1: Selected rate control algorithm 'pid'
[   21.220183] device: 'wlan1': device_add
[   21.225221] phy1: hwaddr 02:00:00:00:01:00 registered
[   21.230063] device: 'hwsim0': device_add
[   21.235088] initcall init_mac80211_hwsim+0x0/0x535 returned 0 after 87890 usecs
[   21.240005] calling  wl12xx_init+0x0/0x57 @ 1
[   21.244364] bus: 'spi': add driver wl12xx
[   21.250221] initcall wl12xx_init+0x0/0x57 returned 0 after 9765 usecs
[   21.256651] calling  iwm_sdio_init_module+0x0/0x39 @ 1
[   21.260005] bus: 'sdio': add driver iwm_sdio
[   21.264505] initcall iwm_sdio_init_module+0x0/0x39 returned 0 after 0 usecs
[   21.270004] calling  dmfe_init_module+0x0/0x10f @ 1
[   21.280002] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[   21.286707] bus: 'pci': add driver dmfe
[   21.290272] initcall dmfe_init_module+0x0/0x10f returned 0 after 9765 usecs
[   21.297223] calling  de_init+0x0/0x42 @ 1
[   21.300029] bus: 'pci': add driver de2104x
[   21.304382] initcall de_init+0x0/0x42 returned 0 after 0 usecs
[   21.310004] calling  tulip_init+0x0/0x5a @ 1
[   21.314269] bus: 'pci': add driver tulip
[   21.320282] initcall tulip_init+0x0/0x5a returned 0 after 9765 usecs
[   21.326625] calling  de4x5_module_init+0x0/0x42 @ 1
[   21.330010] bus: 'pci': add driver de4x5
[   21.334176] initcall de4x5_module_init+0x0/0x42 returned 0 after 0 usecs
[   21.340004] calling  uli526x_init_module+0x0/0xc3 @ 1
[   21.345046] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[   21.350006] bus: 'pci': add driver uli526x
[   21.354383] initcall uli526x_init_module+0x0/0xc3 returned 0 after 9765 usecs
[   21.360005] calling  mkiss_init_driver+0x0/0x68 @ 1
[   21.370002] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[   21.375049] initcall mkiss_init_driver+0x0/0x68 returned 0 after 0 usecs
[   21.380003] calling  sixpack_init_driver+0x0/0x68 @ 1
[   21.385047] AX.25: 6pack driver, Revision: 0.3.0
[   21.390004] initcall sixpack_init_driver+0x0/0x68 returned 0 after 9765 usecs
[   21.400025] calling  bpq_init_driver+0x0/0x8c @ 1
[   21.404750] AX.25: bpqether driver version 004
[   21.409188] initcall bpq_init_driver+0x0/0x8c returned 0 after 0 usecs
[   21.410004] calling  init_baycomserfdx+0x0/0x120 @ 1
[   21.420002] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   21.420005] baycom_ser_fdx: version 0.10 compiled 22:49:37 Aug  2 2009
[   21.430031] device: 'bcsf0': device_add
[   21.434998] device: 'bcsf1': device_add
[   21.441145] device: 'bcsf2': device_add
[   21.446202] device: 'bcsf3': device_add
[   21.451234] initcall init_baycomserfdx+0x0/0x120 returned 0 after 29296 usecs
[   21.460006] calling  hdlcdrv_init_driver+0x0/0x49 @ 1
[   21.465054] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[   21.470002] hdlcdrv: version 0.8 compiled 22:49:38 Aug  2 2009
[   21.475830] initcall hdlcdrv_init_driver+0x0/0x49 returned 0 after 9765 usecs
[   21.480003] calling  usb_irda_init+0x0/0x65 @ 1
[   21.484532] bus: 'usb': add driver irda-usb
[   21.490264] usbcore: registered new interface driver irda-usb
[   21.496055] USB IrDA support registered
[   21.500028] initcall usb_irda_init+0x0/0x65 returned 0 after 19531 usecs
[   21.510004] calling  nsc_ircc_init+0x0/0x2a8 @ 1
[   21.514615] Platform driver 'nsc-ircc' needs updating - please use dev_pm_ops
[   21.520004] bus: 'platform': add driver nsc-ircc
[   21.524878] bus: 'platform': remove driver nsc-ircc
[   21.530235] driver: 'nsc-ircc': driver_release
[   21.534681] initcall nsc_ircc_init+0x0/0x2a8 returned -19 after 19531 usecs
[   21.540004] calling  smsc_ircc_init+0x0/0x4f9 @ 1
[   21.544702] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
[   21.550003] bus: 'platform': add driver smsc-ircc2
[   21.560427] bus: 'platform': remove driver smsc-ircc2
[   21.565713] driver: 'smsc-ircc2': driver_release
[   21.570032] initcall smsc_ircc_init+0x0/0x4f9 returned -19 after 29296 usecs
[   21.577076] calling  ali_ircc_init+0x0/0x812 @ 1
[   21.580003] Platform driver 'ali-ircc' needs updating - please use dev_pm_ops
[   21.587126] bus: 'platform': add driver ali-ircc
[   21.590265] bus: 'platform': remove driver ali-ircc
[   21.595340] driver: 'ali-ircc': driver_release
[   21.600010] initcall ali_ircc_init+0x0/0x812 returned -19 after 19531 usecs
[   21.610004] calling  via_ircc_init+0x0/0x82 @ 1
[   21.614541] bus: 'pci': add driver via-ircc
[   21.618972] initcall via_ircc_init+0x0/0x82 returned 0 after 0 usecs
[   21.620005] calling  kingsun_init+0x0/0x42 @ 1
[   21.630007] bus: 'usb': add driver kingsun-sir
[   21.634666] usbcore: registered new interface driver kingsun-sir
[   21.640009] initcall kingsun_init+0x0/0x42 returned 0 after 9765 usecs
[   21.646528] calling  ksdazzle_init+0x0/0x42 @ 1
[   21.650004] bus: 'usb': add driver ksdazzle-sir
[   21.654740] usbcore: registered new interface driver ksdazzle-sir
[   21.660009] initcall ksdazzle_init+0x0/0x42 returned 0 after 9765 usecs
[   21.666616] calling  ks959_init+0x0/0x42 @ 1
[   21.670004] bus: 'usb': add driver ks959-sir
[   21.674483] usbcore: registered new interface driver ks959-sir
[   21.680009] initcall ks959_init+0x0/0x42 returned 0 after 9765 usecs
[   21.690004] calling  init_netconsole+0x0/0x260 @ 1
[   21.694793] console [netcon0] enabled
[   21.698450] netconsole: network logging started
[   21.700004] initcall init_netconsole+0x0/0x260 returned 0 after 9765 usecs
[   21.710006] calling  niu_init+0x0/0x64 @ 1
[   21.714106] bus: 'pci': add driver niu
[   21.718092] initcall niu_init+0x0/0x64 returned 0 after 0 usecs
[   21.720027] calling  init+0x0/0x39 @ 1
[   21.723774] bus: 'virtio': add driver virtio_net
[   21.730233] initcall init+0x0/0x39 returned 0 after 9765 usecs
[   21.736062] calling  efx_init_module+0x0/0xfd @ 1
[   21.740003] Solarflare NET driver v2.3
[   21.744083] bus: 'pci': add driver sfc
[   21.750249] initcall efx_init_module+0x0/0xfd returned 0 after 9765 usecs
[   21.757032] calling  i2400m_driver_init+0x0/0x2d @ 1
[   21.760005] initcall i2400m_driver_init+0x0/0x2d returned 0 after 0 usecs
[   21.770004] calling  i2400ms_driver_init+0x0/0x39 @ 1
[   21.775049] bus: 'sdio': add driver i2400m_sdio
[   21.780219] initcall i2400ms_driver_init+0x0/0x39 returned 0 after 9765 usecs
[   21.787344] calling  i2o_iop_init+0x0/0x6c @ 1
[   21.790003] I2O subsystem v1.325
[   21.793227] i2o: max drivers = 8
[   21.796733] bus: 'i2o': registered
[   21.800255] bus: 'i2o': add driver exec-osm
[   21.804653] bus: 'pci': add driver PCI_I2O
[   21.810304] initcall i2o_iop_init+0x0/0x6c returned 0 after 19531 usecs
[   21.816908] calling  i2o_bus_init+0x0/0x68 @ 1
[   21.820003] I2O Bus Adapter OSM v1.317
[   21.823749] bus: 'i2o': add driver bus-osm
[   21.830169] initcall i2o_bus_init+0x0/0x68 returned 0 after 9765 usecs
[   21.836688] calling  i2o_scsi_init+0x0/0x68 @ 1
[   21.840003] I2O SCSI Peripheral OSM v1.316
[   21.844095] bus: 'i2o': add driver scsi-osm
[   21.848521] initcall i2o_scsi_init+0x0/0x68 returned 0 after 0 usecs
[   21.850004] calling  fusion_init+0x0/0x164 @ 1
[   21.860003] Fusion MPT base driver 3.04.10
[   21.864096] Copyright (c) 1999-2008 LSI Corporation
[   21.869005] initcall fusion_init+0x0/0x164 returned 0 after 0 usecs
[   21.870004] calling  mptfc_init+0x0/0x115 @ 1
[   21.880024] Fusion MPT FC Host driver 3.04.10
[   21.884408] bus: 'pci': add driver mptfc
[   21.888612] initcall mptfc_init+0x0/0x115 returned 0 after 0 usecs
[   21.890005] calling  mptctl_init+0x0/0x141 @ 1
[   21.894448] Fusion MPT misc device (ioctl) driver 3.04.10
[   21.900011] device: 'mptctl': device_add
[   21.904214] mptctl: Registered with Fusion MPT base driver
[   21.910004] mptctl: /dev/mptctl @ (major,minor=10,220)
[   21.915135] initcall mptctl_init+0x0/0x141 returned 0 after 19531 usecs
[   21.920004] calling  mpt_lan_init+0x0/0xa4 @ 1
[   21.930005] Fusion MPT LAN driver 3.04.10
[   21.934011] initcall mpt_lan_init+0x0/0xa4 returned 0 after 0 usecs
[   21.940004] calling  fw_core_init+0x0/0xb0 @ 1
[   21.944692] bus: 'firewire': registered
[   21.948570] initcall fw_core_init+0x0/0xb0 returned 0 after 0 usecs
[   21.950028] calling  fw_ohci_init+0x0/0x42 @ 1
[   21.960009] bus: 'pci': add driver firewire_ohci
[   21.964878] initcall fw_ohci_init+0x0/0x42 returned 0 after 0 usecs
[   21.970009] calling  sbp2_init+0x0/0x6d @ 1
[   21.974287] bus: 'firewire': add driver sbp2
[   21.980261] initcall sbp2_init+0x0/0x6d returned 0 after 9765 usecs
[   21.986519] calling  ohci1394_init+0x0/0x42 @ 1
[   21.990032] bus: 'pci': add driver ohci1394
[   21.994449] initcall ohci1394_init+0x0/0x42 returned 0 after 0 usecs
[   22.000074] calling  video1394_init_module+0x0/0xfc @ 1
[   22.005296] bus: 'ieee1394': add driver video1394
[   22.010222] video1394: Installed video1394 module
[   22.014920] initcall video1394_init_module+0x0/0xfc returned 0 after 9765 usecs
[   22.020022] calling  init_raw1394+0x0/0x11a @ 1
[   22.024560] device: 'raw1394': device_add
[   22.030267] ieee1394: raw1394: /dev/raw1394 device initialized
[   22.036095] bus: 'ieee1394': add driver raw1394
[   22.040280] initcall init_raw1394+0x0/0x11a returned 0 after 19531 usecs
[   22.050014] calling  dv1394_init_module+0x0/0xc5 @ 1
[   22.054974] bus: 'ieee1394': add driver dv1394
[   22.059649] initcall dv1394_init_module+0x0/0xc5 returned 0 after 0 usecs
[   22.060004] calling  ether1394_init_module+0x0/0x96 @ 1
[   22.070487] bus: 'ieee1394': add driver eth1394
[   22.075223] initcall ether1394_init_module+0x0/0x96 returned 0 after 0 usecs
[   22.080005] calling  cdrom_init+0x0/0x91 @ 1
[   22.084268] initcall cdrom_init+0x0/0x91 returned 0 after 0 usecs
[   22.090004] calling  ks0108_init+0x0/0xe0 @ 1
[   22.094359] parport0: cannot grant exclusive access for device ks0108
[   22.100008] ks0108: ERROR: parport didn't register new device
[   22.110004] initcall ks0108_init+0x0/0xe0 returned -22 after 19531 usecs
[   22.116696] initcall ks0108_init+0x0/0xe0 returned with error code -22 
[   22.120026] calling  spi_gpio_init+0x0/0x40 @ 1
[   22.124557] bus: 'platform': add driver spi_gpio
[   22.130240] bus: 'platform': remove driver spi_gpio
[   22.135310] driver: 'spi_gpio': driver_release
[   22.140011] initcall spi_gpio_init+0x0/0x40 returned -19 after 19531 usecs
[   22.150004] calling  init_spi_lm70llp+0x0/0x39 @ 1
[   22.154796] parport0: cannot grant exclusive access for device spi-lm70llp
[   22.160008] spi-lm70llp: spi_lm70llp probe fail, status -12
[   22.165578] initcall init_spi_lm70llp+0x0/0x39 returned 0 after 9765 usecs
[   22.170003] calling  spidev_init+0x0/0xbf @ 1
[   22.174363] device class 'spidev': registering
[   22.180245] bus: 'spi': add driver spidev
[   22.184505] initcall spidev_init+0x0/0xbf returned 0 after 9765 usecs
[   22.190005] calling  tle62x0_init+0x0/0x39 @ 1
[   22.194442] bus: 'spi': add driver tle62x0
[   22.200209] initcall tle62x0_init+0x0/0x39 returned 0 after 9765 usecs
[   22.206729] calling  aoe_init+0x0/0xd5 @ 1
[   22.210011] device class 'aoe': registering
[   22.214438] device: 'err': device_add
[   22.220271] device: 'discover': device_add
[   22.224630] device: 'interfaces': device_add
[   22.230263] device: 'revalidate': device_add
[   22.234776] device: 'flush': device_add
[   22.239272] aoe: AoE v47 initialised.
[   22.240246] initcall aoe_init+0x0/0xd5 returned 0 after 29296 usecs
[   22.250005] calling  uwb_subsys_init+0x0/0x77 @ 1
[   22.254723] device class 'uwb_rc': registering
[   22.259401] initcall uwb_subsys_init+0x0/0x77 returned 0 after 0 usecs
[   22.260006] calling  wlp_subsys_init+0x0/0x2d @ 1
[   22.270004] initcall wlp_subsys_init+0x0/0x2d returned 0 after 0 usecs
[   22.276521] calling  umc_bus_init+0x0/0x39 @ 1
[   22.280259] bus: 'umc': registered
[   22.283663] initcall umc_bus_init+0x0/0x39 returned 0 after 0 usecs
[   22.290005] calling  whci_init+0x0/0x42 @ 1
[   22.294196] bus: 'pci': add driver whci
[   22.298302] initcall whci_init+0x0/0x42 returned 0 after 0 usecs
[   22.300004] calling  whcrc_driver_init+0x0/0x42 @ 1
[   22.310003] bus: 'umc': add driver whc-rc
[   22.314226] initcall whcrc_driver_init+0x0/0x42 returned 0 after 0 usecs
[   22.320005] calling  hwarc_driver_init+0x0/0x42 @ 1
[   22.324879] bus: 'usb': add driver hwa-rc
[   22.330224] usbcore: registered new interface driver hwa-rc
[   22.335799] initcall hwarc_driver_init+0x0/0x42 returned 0 after 9765 usecs
[   22.340005] calling  gpio_vbus_init+0x0/0x40 @ 1
[   22.344616] bus: 'platform': add driver gpio-vbus
[   22.350262] bus: 'platform': remove driver gpio-vbus
[   22.355418] driver: 'gpio-vbus': driver_release
[   22.360011] initcall gpio_vbus_init+0x0/0x40 returned -19 after 19531 usecs
[   22.366962] calling  mon_init+0x0/0x141 @ 1
[   22.370015] device class 'usbmon': registering
[   22.374689] device: 'usbmon0': device_add
[   22.380339] initcall mon_init+0x0/0x141 returned 0 after 9765 usecs
[   22.386599] calling  ehci_hcd_init+0x0/0x10e @ 1
[   22.390004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   22.400003] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[   22.406028] bus: 'pci': add driver ehci_hcd
[   22.410027] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd
[   22.418537] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1
[   22.420204] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[   22.430007] ehci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
[   22.440005] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[   22.446113] initcall ehci_hcd_init+0x0/0x10e returned 0 after 48828 usecs
[   22.450027] calling  oxu_module_init+0x0/0x39 @ 1
[   22.460004] bus: 'platform': add driver oxu210hp-hcd
[   22.465183] initcall oxu_module_init+0x0/0x39 returned 0 after 0 usecs
[   22.470057] calling  ohci_hcd_mod_init+0x0/0x101 @ 1
[   22.475012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   22.480003] ohci_hcd: block sizes: ed 80 td 96
[   22.484478] bus: 'pci': add driver ohci_hcd
[   22.490026] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
[   22.500003] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
[   22.508021] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[   22.510042] ohci_hcd 0000:00:02.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
[   22.520008] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[   22.530272] bus: 'ssb': add driver ohci_hcd
[   22.534661] initcall ohci_hcd_mod_init+0x0/0x101 returned 0 after 58593 usecs
[   22.540027] calling  uhci_hcd_init+0x0/0x159 @ 1
[   22.544640] uhci_hcd: USB Universal Host Controller Interface driver
[   22.550486] bus: 'pci': add driver uhci_hcd
[   22.554946] initcall uhci_hcd_init+0x0/0x159 returned 0 after 9765 usecs
[   22.560058] calling  sl811h_init+0x0/0x67 @ 1
[   22.570003] sl811: driver sl811-hcd, 19 May 2005
[   22.574615] bus: 'platform': add driver sl811-hcd
[   22.580206] initcall sl811h_init+0x0/0x67 returned 0 after 9765 usecs
[   22.586641] calling  u132_hcd_init+0x0/0xd8 @ 1
[   22.590023] driver u132_hcd built at 22:49:46 on Aug  2 2009
[   22.595786] bus: 'platform': add driver u132_hcd
[   22.600300] initcall u132_hcd_init+0x0/0xd8 returned 0 after 9765 usecs
[   22.606910] calling  isp1760_init+0x0/0x76 @ 1
[   22.610798] bus: 'platform': add driver isp1760
[   22.615539] bus: 'pci': add driver isp1760
[   22.620298] initcall isp1760_init+0x0/0x76 returned 0 after 9765 usecs
[   22.626814] calling  hwahc_driver_init+0x0/0x42 @ 1
[   22.630011] bus: 'usb': add driver hwa-hc
[   22.634226] usbcore: registered new interface driver hwa-hc
[   22.640009] initcall hwahc_driver_init+0x0/0x42 returned 0 after 9765 usecs
[   22.650004] calling  c67x00_init+0x0/0x39 @ 1
[   22.654356] bus: 'platform': add driver c67x00
[   22.660321] initcall c67x00_init+0x0/0x39 returned 0 after 9765 usecs
[   22.666752] calling  wusbcore_init+0x0/0x9a @ 1
[   22.670127] initcall wusbcore_init+0x0/0x9a returned 0 after 0 usecs
[   22.676477] calling  cbaf_driver_init+0x0/0x42 @ 1
[   22.680005] bus: 'usb': add driver wusb-cbaf
[   22.684544] usbcore: registered new interface driver wusb-cbaf
[   22.690009] initcall cbaf_driver_init+0x0/0x42 returned 0 after 9765 usecs
[   22.696875] calling  acm_init+0x0/0x128 @ 1
[   22.700016] bus: 'usb': add driver cdc_acm
[   22.704317] usbcore: registered new interface driver cdc_acm
[   22.710007] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   22.720005] initcall acm_init+0x0/0x128 returned 0 after 19531 usecs
[   22.726348] calling  usb_stor_init+0x0/0x6a @ 1
[   22.730004] Initializing USB Mass Storage driver...
[   22.734878] bus: 'usb': add driver usb-storage
[   22.740216] usbcore: registered new interface driver usb-storage
[   22.746220] USB Mass Storage support registered.
[   22.750033] initcall usb_stor_init+0x0/0x6a returned 0 after 19531 usecs
[   22.760004] calling  alauda_init+0x0/0x42 @ 1
[   22.764355] bus: 'usb': add driver ums-alauda
[   22.768974] usbcore: registered new interface driver ums-alauda
[   22.770009] initcall alauda_init+0x0/0x42 returned 0 after 9765 usecs
[   22.780004] calling  cypress_init+0x0/0x42 @ 1
[   22.784444] bus: 'usb': add driver ums-cypress
[   22.790207] usbcore: registered new interface driver ums-cypress
[   22.796213] initcall cypress_init+0x0/0x42 returned 0 after 9765 usecs
[   22.800005] calling  datafab_init+0x0/0x42 @ 1
[   22.804443] bus: 'usb': add driver ums-datafab
[   22.810214] usbcore: registered new interface driver ums-datafab
[   22.816223] initcall datafab_init+0x0/0x42 returned 0 after 9765 usecs
[   22.820005] calling  freecom_init+0x0/0x42 @ 1
[   22.824442] bus: 'usb': add driver ums-freecom
[   22.830229] usbcore: registered new interface driver ums-freecom
[   22.840009] initcall freecom_init+0x0/0x42 returned 0 after 19531 usecs
[   22.846616] calling  isd200_init+0x0/0x42 @ 1
[   22.850004] bus: 'usb': add driver ums-isd200
[   22.854567] usbcore: registered new interface driver ums-isd200
[   22.860009] initcall isd200_init+0x0/0x42 returned 0 after 9765 usecs
[   22.866442] calling  jumpshot_init+0x0/0x42 @ 1
[   22.870004] bus: 'usb': add driver ums-jumpshot
[   22.874768] usbcore: registered new interface driver ums-jumpshot
[   22.880009] initcall jumpshot_init+0x0/0x42 returned 0 after 9765 usecs
[   22.886614] calling  sddr09_init+0x0/0x42 @ 1
[   22.890004] bus: 'usb': add driver ums-sddr09
[   22.894568] usbcore: registered new interface driver ums-sddr09
[   22.900009] initcall sddr09_init+0x0/0x42 returned 0 after 9765 usecs
[   22.910004] calling  usbat_init+0x0/0x42 @ 1
[   22.914270] bus: 'usb': add driver ums-usbat
[   22.920120] usbcore: registered new interface driver ums-usbat
[   22.925954] initcall usbat_init+0x0/0x42 returned 0 after 9765 usecs
[   22.930006] calling  usb_mdc800_init+0x0/0x325 @ 1
[   22.934801] bus: 'usb': add driver mdc800
[   22.940213] usbcore: registered new interface driver mdc800
[   22.945778] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   22.950006] initcall usb_mdc800_init+0x0/0x325 returned 0 after 19531 usecs
[   22.960004] calling  microtek_drv_init+0x0/0x42 @ 1
[   22.964876] bus: 'usb': add driver microtekX6
[   22.970212] usbcore: registered new interface driver microtekX6
[   22.976127] initcall microtek_drv_init+0x0/0x42 returned 0 after 9765 usecs
[   22.980005] calling  adu_init+0x0/0xba @ 1
[   22.984094] drivers/usb/misc/adutux.c :  adu_init : enter 
[   22.990004] bus: 'usb': add driver adutux
[   22.994269] usbcore: registered new interface driver adutux
[   23.000007] adutux adutux (see www.ontrak.net) v0.0.13
[   23.005142] adutux is an experimental driver. Use at your own risk
[   23.010005] drivers/usb/misc/adutux.c :  adu_init : leave, return value 0 
[   23.020004] initcall adu_init+0x0/0xba returned 0 after 39062 usecs
[   23.026260] calling  appledisplay_init+0x0/0x80 @ 1
[   23.030099] bus: 'usb': add driver appledisplay
[   23.034833] usbcore: registered new interface driver appledisplay
[   23.040037] initcall appledisplay_init+0x0/0x80 returned 0 after 9765 usecs
[   23.050004] calling  berry_init+0x0/0x42 @ 1
[   23.054270] bus: 'usb': add driver berry_charge
[   23.059010] usbcore: registered new interface driver berry_charge
[   23.060009] initcall berry_init+0x0/0x42 returned 0 after 9765 usecs
[   23.070004] calling  usb_cytherm_init+0x0/0x70 @ 1
[   23.074789] bus: 'usb': add driver cytherm
[   23.080214] usbcore: registered new interface driver cytherm
[   23.085871] cytherm: v1.0:Cypress USB Thermometer driver
[   23.090006] initcall usb_cytherm_init+0x0/0x70 returned 0 after 19531 usecs
[   23.096955] calling  emi26_init+0x0/0x42 @ 1
[   23.100004] bus: 'usb': add driver emi26 - firmware loader
[   23.105693] usbcore: registered new interface driver emi26 - firmware loader
[   23.110009] initcall emi26_init+0x0/0x42 returned 0 after 9765 usecs
[   23.120004] calling  ftdi_elan_init+0x0/0x192 @ 1
[   23.124700] driver ftdi-elan built at 22:49:45 on Aug  2 2009
[   23.130336] bus: 'usb': add driver ftdi-elan
[   23.134824] usbcore: registered new interface driver ftdi-elan
[   23.140019] initcall ftdi_elan_init+0x0/0x192 returned 0 after 19531 usecs
[   23.150004] calling  iowarrior_init+0x0/0x42 @ 1
[   23.154617] bus: 'usb': add driver iowarrior
[   23.159099] usbcore: registered new interface driver iowarrior
[   23.160009] initcall iowarrior_init+0x0/0x42 returned 0 after 9765 usecs
[   23.170004] calling  isight_firmware_init+0x0/0x42 @ 1
[   23.175138] bus: 'usb': add driver isight_firmware
[   23.180225] usbcore: registered new interface driver isight_firmware
[   23.186576] initcall isight_firmware_init+0x0/0x42 returned 0 after 9765 usecs
[   23.190005] calling  usb_lcd_init+0x0/0x60 @ 1
[   23.200004] bus: 'usb': add driver usblcd
[   23.204221] usbcore: registered new interface driver usblcd
[   23.210009] initcall usb_lcd_init+0x0/0x60 returned 0 after 9765 usecs
[   23.216530] calling  ld_usb_init+0x0/0x60 @ 1
[   23.220004] bus: 'usb': add driver ldusb
[   23.224135] usbcore: registered new interface driver ldusb
[   23.230011] initcall ld_usb_init+0x0/0x60 returned 0 after 9765 usecs
[   23.236444] calling  usb_led_init+0x0/0x60 @ 1
[   23.240005] bus: 'usb': add driver usbled
[   23.244221] usbcore: registered new interface driver usbled
[   23.250009] initcall usb_led_init+0x0/0x60 returned 0 after 9765 usecs
[   23.256529] calling  usb_rio_init+0x0/0x5e @ 1
[   23.260005] bus: 'usb': add driver rio500
[   23.264231] usbcore: registered new interface driver rio500
[   23.270010] rio500: v1.1:USB Rio 500 driver
[   23.274191] initcall usb_rio_init+0x0/0x5e returned 0 after 9765 usecs
[   23.280004] calling  tv_init+0x0/0x70 @ 1
[   23.284008] bus: 'usb': add driver trancevibrator
[   23.290215] usbcore: registered new interface driver trancevibrator
[   23.296480] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[   23.300006] initcall tv_init+0x0/0x70 returned 0 after 19531 usecs
[   23.310004] calling  usb_sevseg_init+0x0/0x60 @ 1
[   23.314704] bus: 'usb': add driver usbsevseg
[   23.319184] usbcore: registered new interface driver usbsevseg
[   23.320009] initcall usb_sevseg_init+0x0/0x60 returned 0 after 9765 usecs
[   23.330006] calling  vstusb_init+0x0/0x67 @ 1
[   23.334357] bus: 'usb': add driver vstusb
[   23.340228] usbcore: registered new interface driver vstusb
[   23.345796] initcall vstusb_init+0x0/0x67 returned 0 after 9765 usecs
[   23.350005] calling  i8042_init+0x0/0xdb @ 1
[   23.354318] bus: 'platform': add driver i8042
[   23.360227] Registering platform device 'i8042'. Parent at platform
[   23.366489] device: 'i8042': device_add
[   23.370013] bus: 'platform': add device i8042
[   23.374641] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[   23.380003] bus: 'platform': really_probe: probing driver i8042 with device i8042
[   23.391444] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.391444] serio: i8042 AUX port at 0x60,0x64 irq 12
[   23.391444] driver: 'i8042': driver_bound: bound to device 'i8042'
[   23.400096] bus: 'platform': really_probe: bound device i8042 to driver i8042
[   23.407233] initcall i8042_init+0x0/0xdb returned 0 after 58593 usecs
[   23.410006] calling  parkbd_init+0x0/0x230 @ 1
[   23.414447] parport0: cannot grant exclusive access for device parkbd
[   23.420081] initcall parkbd_init+0x0/0x230 returned -19 after 9765 usecs
[   23.430005] calling  serport_init+0x0/0x5a @ 1
[   23.434443] initcall serport_init+0x0/0x5a returned 0 after 0 usecs
[   23.440031] calling  pcips2_init+0x0/0x42 @ 1
[   23.444400] bus: 'pci': add driver pcips2
[   23.460000] device: 'serio0': device_add
[   23.460388] initcall pcips2_init+0x0/0x42 returned 0 after 9765 usecs
[   23.460393] calling  serio_raw_init+0x0/0x42 @ 1
[   23.460397] bus: 'serio': add driver serio_raw
[   23.460620] initcall serio_raw_init+0x0/0x42 returned 0 after 0 usecs
[   23.460624] calling  emu_init+0x0/0x42 @ 1
[   23.460641] bus: 'pci': add driver Emu10k1_gameport
[   23.460942] initcall emu_init+0x0/0x42 returned 0 after 0 usecs
[   23.460947] calling  fm801_gp_init+0x0/0x42 @ 1
[   23.460953] bus: 'pci': add driver FM801_gameport
[   23.461189] initcall fm801_gp_init+0x0/0x42 returned 0 after 0 usecs
[   23.461193] calling  l4_init+0x0/0x37f @ 1
[   23.461215] initcall l4_init+0x0/0x37f returned -19 after 0 usecs
[   23.461219] calling  ns558_init+0x0/0x311 @ 1
[   23.470000] initcall ns558_init+0x0/0x311 returned -19 after 0 usecs
[   23.470000] calling  mousedev_init+0x0/0x87 @ 1
[   23.470000] device: 'mice': device_add
[   23.470000] mice: PS/2 mouse device common for all mice
[   23.470000] initcall mousedev_init+0x0/0x87 returned 0 after 0 usecs
[   23.470000] calling  joydev_init+0x0/0x39 @ 1
[   23.470000] initcall joydev_init+0x0/0x39 returned 0 after 0 usecs
[   23.470000] calling  evdev_init+0x0/0x39 @ 1
[   23.470000] initcall evdev_init+0x0/0x39 returned 0 after 0 usecs
[   23.470000] calling  evbug_init+0x0/0x39 @ 1
[   23.470000] initcall evbug_init+0x0/0x39 returned 0 after 0 usecs
[   23.470000] calling  atkbd_init+0x0/0x42 @ 1
[   23.470000] bus: 'serio': add driver atkbd
[   23.470000] initcall atkbd_init+0x0/0x42 returned 0 after 0 usecs
[   23.470000] calling  gpio_keys_init+0x0/0x39 @ 1
[   23.470000] bus: 'platform': add driver gpio-keys
[   23.470000] initcall gpio_keys_init+0x0/0x39 returned 0 after 0 usecs
[   23.470000] calling  lkkbd_init+0x0/0x42 @ 1
[   23.470000] bus: 'serio': add driver lkkbd
[   23.470000] initcall lkkbd_init+0x0/0x42 returned 0 after 0 usecs
[   23.470000] calling  lm8323_init+0x0/0x3b @ 1
[   23.470000] bus: 'i2c': add driver lm8323
[   23.470000] initcall lm8323_init+0x0/0x3b returned 0 after 0 usecs
[   23.470000] calling  matrix_keypad_init+0x0/0x39 @ 1
[   23.470000] bus: 'platform': add driver matrix-keypad
[   23.470000] initcall matrix_keypad_init+0x0/0x39 returned 0 after 0 usecs
[   23.470000] calling  sunkbd_init+0x0/0x42 @ 1
[   23.470000] bus: 'serio': add driver sunkbd
[   23.470000] initcall sunkbd_init+0x0/0x42 returned 0 after 0 usecs
[   23.470000] calling  xtkbd_init+0x0/0x42 @ 1
[   23.470000] bus: 'serio': add driver xtkbd
[   23.470000] initcall xtkbd_init+0x0/0x42 returned 0 after 0 usecs
[   23.470000] calling  atp_init+0x0/0x42 @ 1
[   23.470000] bus: 'usb': add driver appletouch
[   23.470000] usbcore: registered new interface driver appletouch
[   23.470000] initcall atp_init+0x0/0x42 returned 0 after 0 usecs
[   23.470000] calling  gpio_mouse_init+0x0/0x39 @ 1
[   23.470000] bus: 'platform': add driver gpio_mouse
[   23.470000] initcall gpio_mouse_init+0x0/0x39 returned 0 after 0 usecs
[   23.470000] calling  psmouse_init+0x0/0x9a @ 1
[   23.470000] bus: 'serio': add device serio0
[   23.480948] bus: 'serio': add driver psmouse
[   23.485465] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[   23.485622] initcall psmouse_init+0x0/0x9a returned 0 after 19531 usecs
[   23.485627] calling  sermouse_init+0x0/0x42 @ 1
[   23.485630] bus: 'serio': add driver sermouse
[   23.485878] initcall sermouse_init+0x0/0x42 returned 0 after 0 usecs
[   23.485882] calling  synaptics_i2c_init+0x0/0x3b @ 1
[   23.485887] bus: 'i2c': add driver synaptics_i2c
[   23.486098] initcall synaptics_i2c_init+0x0/0x3b returned 0 after 0 usecs
[   23.486103] calling  vsxxxaa_init+0x0/0x42 @ 1
[   23.486106] bus: 'serio': add driver vsxxxaa
[   23.486356] initcall vsxxxaa_init+0x0/0x42 returned 0 after 0 usecs
[   23.486360] calling  a3d_init+0x0/0x42 @ 1
[   23.486363] bus: 'gameport': add driver adc
[   23.486581] initcall a3d_init+0x0/0x42 returned 0 after 0 usecs
[   23.486585] calling  analog_init+0x0/0x118 @ 1
[   23.486588] bus: 'gameport': add driver analog
[   23.486841] initcall analog_init+0x0/0x118 returned 0 after 0 usecs
[   23.486845] calling  gc_init+0x0/0x62b @ 1
[   23.486850] initcall gc_init+0x0/0x62b returned -19 after 0 usecs
[   23.486853] calling  gf2k_init+0x0/0x42 @ 1
[   23.486856] bus: 'gameport': add driver gf2k
[   23.487069] initcall gf2k_init+0x0/0x42 returned 0 after 0 usecs
[   23.487073] calling  grip_init+0x0/0x42 @ 1
[   23.487076] bus: 'gameport': add driver grip_mp
[   23.487326] initcall grip_init+0x0/0x42 returned 0 after 0 usecs
[   23.487330] calling  iforce_init+0x0/0x42 @ 1
[   23.487333] bus: 'serio': add driver iforce
[   23.487558] initcall iforce_init+0x0/0x42 returned 0 after 0 usecs
[   23.487563] calling  interact_init+0x0/0x42 @ 1
[   23.487566] bus: 'gameport': add driver interact
[   23.487813] initcall interact_init+0x0/0x42 returned 0 after 0 usecs
[   23.487818] calling  magellan_init+0x0/0x42 @ 1
[   23.487821] bus: 'serio': add driver magellan
[   23.488056] initcall magellan_init+0x0/0x42 returned 0 after 0 usecs
[   23.488060] calling  sw_init+0x0/0x42 @ 1
[   23.488063] bus: 'gameport': add driver sidewinder
[   23.488307] initcall sw_init+0x0/0x42 returned 0 after 0 usecs
[   23.488311] calling  spaceball_init+0x0/0x42 @ 1
[   23.488315] bus: 'serio': add driver spaceball
[   23.488531] initcall spaceball_init+0x0/0x42 returned 0 after 0 usecs
[   23.488535] calling  spaceorb_init+0x0/0x42 @ 1
[   23.488538] bus: 'serio': add driver spaceorb
[   23.488796] initcall spaceorb_init+0x0/0x42 returned 0 after 0 usecs
[   23.488800] calling  stinger_init+0x0/0x42 @ 1
[   23.488803] bus: 'serio': add driver stinger
[   23.489038] initcall stinger_init+0x0/0x42 returned 0 after 0 usecs
[   23.489042] calling  tmdc_init+0x0/0x42 @ 1
[   23.489045] bus: 'gameport': add driver tmdc
[   23.489289] initcall tmdc_init+0x0/0x42 returned 0 after 0 usecs
[   23.489293] calling  tgfx_init+0x0/0x4a2 @ 1
[   23.489298] initcall tgfx_init+0x0/0x4a2 returned -19 after 0 usecs
[   23.489302] calling  walkera0701_init+0x0/0x2c8 @ 1
[   23.489305] walkera0701: parport without interrupt
[   23.489310] initcall walkera0701_init+0x0/0x2c8 returned -19 after 0 usecs
[   23.489314] calling  ad7877_init+0x0/0x39 @ 1
[   23.489319] bus: 'spi': add driver ad7877
[   23.489530] initcall ad7877_init+0x0/0x39 returned 0 after 0 usecs
[   23.489535] calling  ad7879_init+0x0/0x39 @ 1
[   23.489539] bus: 'spi': add driver ad7879
[   23.489782] initcall ad7879_init+0x0/0x39 returned 0 after 0 usecs
[   23.489787] calling  elo_init+0x0/0x42 @ 1
[   23.489791] bus: 'serio': add driver elo
[   23.490056] initcall elo_init+0x0/0x42 returned 0 after 9765 usecs
[   23.490060] calling  fujitsu_init+0x0/0x42 @ 1
[   23.490063] bus: 'serio': add driver fujitsu_ts
[   23.490326] initcall fujitsu_init+0x0/0x42 returned 0 after 0 usecs
[   23.490331] calling  usbtouch_init+0x0/0x42 @ 1
[   23.490342] bus: 'usb': add driver usbtouchscreen
[   23.490574] usbcore: registered new interface driver usbtouchscreen
[   23.490584] initcall usbtouch_init+0x0/0x42 returned 0 after 0 usecs
[   23.490588] calling  touchit213_init+0x0/0x42 @ 1
[   23.490592] bus: 'serio': add driver touchit213
[   23.490840] initcall touchit213_init+0x0/0x42 returned 0 after 0 usecs
[   23.490844] calling  tr_init+0x0/0x42 @ 1
[   23.490847] bus: 'serio': add driver touchright
[   23.491083] initcall tr_init+0x0/0x42 returned 0 after 0 usecs
[   23.491087] calling  tw_init+0x0/0x42 @ 1
[   23.491090] bus: 'serio': add driver touchwin
[   23.491350] initcall tw_init+0x0/0x42 returned 0 after 0 usecs
[   23.491354] calling  tsc2007_init+0x0/0x3b @ 1
[   23.491359] bus: 'i2c': add driver tsc2007
[   23.491582] initcall tsc2007_init+0x0/0x3b returned 0 after 0 usecs
[   23.491586] calling  da9034_touch_init+0x0/0x39 @ 1
[   23.491593] bus: 'platform': add driver da9034-touch
[   23.491847] initcall da9034_touch_init+0x0/0x39 returned 0 after 0 usecs
[   23.491852] calling  w90x900ts_init+0x0/0x39 @ 1
[   23.491856] bus: 'platform': add driver w90x900-ts
[   23.492067] initcall w90x900ts_init+0x0/0x39 returned 0 after 0 usecs
[   23.492072] calling  i2c_dev_init+0x0/0xcb @ 1
[   23.492074] i2c /dev entries driver
[   23.492096] device class 'i2c-dev': registering
[   23.492345] bus: 'i2c': add driver dev_driver
[   23.492554] initcall i2c_dev_init+0x0/0xcb returned 0 after 0 usecs
[   23.492559] calling  i2c_ali1535_init+0x0/0x42 @ 1
[   23.492580] bus: 'pci': add driver ali1535_smbus
[   23.492884] initcall i2c_ali1535_init+0x0/0x42 returned 0 after 0 usecs
[   23.492889] calling  ali1563_init+0x0/0x42 @ 1
[   23.492896] bus: 'pci': add driver ali1563_smbus
[   23.493123] initcall ali1563_init+0x0/0x42 returned 0 after 0 usecs
[   23.493128] calling  i2c_amd8111_init+0x0/0x42 @ 1
[   23.493135] bus: 'pci': add driver amd8111_smbus2
[   23.493409] initcall i2c_amd8111_init+0x0/0x42 returned 0 after 0 usecs
[   23.493414] calling  i2c_i801_init+0x0/0x42 @ 1
[   23.493421] bus: 'pci': add driver i801_smbus
[   23.493655] initcall i2c_i801_init+0x0/0x42 returned 0 after 0 usecs
[   23.493660] calling  i2c_sch_init+0x0/0x42 @ 1
[   23.493667] bus: 'pci': add driver isch_smbus
[   23.493961] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs
[   23.493966] calling  nforce2_init+0x0/0x42 @ 1
[   23.493972] bus: 'pci': add driver nForce2_smbus
[   23.493992] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
[   23.493996] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
[   23.502943] device: 'i2c-0': device_add
[   23.520109] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.560018] device: '0-0050': device_add
[   23.560030] bus: 'i2c': add device 0-0050
[   23.560275] bus: 'i2c': driver_probe_device: matched device 0-0050 with driver eeprom
[   23.560279] bus: 'i2c': really_probe: probing driver eeprom with device 0-0050
[   23.560297] driver: '0-0050': driver_bound: bound to device 'eeprom'
[   23.560301] bus: 'i2c': really_probe: bound device 0-0050 to driver eeprom
[   23.600037] device: '0-0051': device_add
[   23.600047] bus: 'i2c': add device 0-0051
[   23.600260] bus: 'i2c': driver_probe_device: matched device 0-0051 with driver eeprom
[   23.600264] bus: 'i2c': really_probe: probing driver eeprom with device 0-0051
[   23.600281] driver: '0-0051': driver_bound: bound to device 'eeprom'
[   23.600284] bus: 'i2c': really_probe: bound device 0-0051 to driver eeprom
[   23.620068] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.640030] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.660010] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.680010] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.700009] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.720010] i2c-adapter i2c-0: Transaction failed (0x10)!
[   23.720057] device: 'i2c-0': device_add
[   23.720362] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[   23.720377] device: 'i2c-1': device_add
[   23.740111] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.760034] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.780012] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.800010] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.820010] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.840009] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.860009] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.880009] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.900010] i2c-adapter i2c-1: Transaction failed (0x10)!
[   23.900027] device: 'i2c-1': device_add
[   23.900284] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[   23.900309] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
[   23.900316] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
[   23.900560] initcall nforce2_init+0x0/0x42 returned 0 after 400390 usecs
[   23.900566] calling  i2c_piix4_init+0x0/0x42 @ 1
[   23.900585] bus: 'pci': add driver piix4_smbus
[   23.900849] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs
[   23.900854] calling  i2c_sis5595_init+0x0/0x42 @ 1
[   23.900861] bus: 'pci': add driver sis5595_smbus
[   23.901126] initcall i2c_sis5595_init+0x0/0x42 returned 0 after 0 usecs
[   23.901131] calling  i2c_sis630_init+0x0/0x42 @ 1
[   23.901138] bus: 'pci': add driver sis630_smbus
[   23.901370] initcall i2c_sis630_init+0x0/0x42 returned 0 after 0 usecs
[   23.901375] calling  i2c_sis96x_init+0x0/0x42 @ 1
[   23.901382] bus: 'pci': add driver sis96x_smbus
[   23.901649] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 0 usecs
[   23.901653] calling  ocores_i2c_init+0x0/0x39 @ 1
[   23.901660] bus: 'platform': add driver ocores-i2c
[   23.901889] initcall ocores_i2c_init+0x0/0x39 returned 0 after 0 usecs
[   23.901894] calling  i2c_adap_simtec_init+0x0/0x39 @ 1
[   23.901898] bus: 'platform': add driver simtec-i2c
[   23.902143] initcall i2c_adap_simtec_init+0x0/0x39 returned 0 after 0 usecs
[   23.902148] calling  i2c_parport_init+0x0/0x171 @ 1
[   23.902151] i2c-parport-light: adapter type unspecified
[   23.902156] initcall i2c_parport_init+0x0/0x171 returned -19 after 0 usecs
[   23.902160] calling  taos_init+0x0/0x42 @ 1
[   23.902166] bus: 'serio': add driver taos-evm
[   23.902387] initcall taos_init+0x0/0x42 returned 0 after 0 usecs
[   23.902391] calling  tsl2550_init+0x0/0x3b @ 1
[   23.902395] bus: 'i2c': add driver tsl2550
[   23.902643] initcall tsl2550_init+0x0/0x3b returned 0 after 0 usecs
[   23.902648] calling  videodev_init+0x0/0xad @ 1
[   23.902651] Linux video capture interface: v2.00
[   23.902657] device class 'video4linux': registering
[   23.902872] initcall videodev_init+0x0/0xad returned 0 after 0 usecs
[   23.902877] calling  dabusb_init+0x0/0x11b @ 1
[   23.902993] bus: 'usb': add driver dabusb
[   23.903247] usbcore: registered new interface driver dabusb
[   23.903253] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
[   23.903259] initcall dabusb_init+0x0/0x11b returned 0 after 0 usecs
[   23.903264] calling  gemtek_pci_init+0x0/0x42 @ 1
[   23.903281] bus: 'pci': add driver gemtek_pci
[   23.903564] initcall gemtek_pci_init+0x0/0x42 returned 0 after 0 usecs
[   23.903569] calling  maestro_radio_init+0x0/0x5e @ 1
[   23.903576] bus: 'pci': add driver maestro_radio
[   23.903842] initcall maestro_radio_init+0x0/0x5e returned 0 after 0 usecs
[   23.903847] calling  dsbr100_init+0x0/0x5a @ 1
[   23.903854] bus: 'usb': add driver dsbr100
[   23.904063] usbcore: registered new interface driver dsbr100
[   23.904070] dsbr100: v0.46:D-Link DSB-R100 USB FM radio driver
[   23.904075] initcall dsbr100_init+0x0/0x5a returned 0 after 0 usecs
[   23.904080] calling  tea5764_init+0x0/0x53 @ 1
[   23.904085] bus: 'i2c': add driver radio-tea5764
[   23.904343] radio_tea5764: v0.01: A driver for the TEA5764 radio chip for EZX Phones.
[   23.904349] initcall tea5764_init+0x0/0x53 returned 0 after 0 usecs
[   23.904355] calling  w1_init+0x0/0xcd @ 1
[   23.904357] Driver for 1-wire Dallas network protocol.
[   23.904602] bus: 'w1': registered
[   23.904606] bus: 'w1': add driver w1_master_driver
[   23.904867] bus: 'w1': add driver w1_slave_driver
[   23.905126] initcall w1_init+0x0/0xcd returned 0 after 0 usecs
[   23.905131] calling  matrox_w1_init+0x0/0x42 @ 1
[   23.905144] bus: 'pci': add driver matrox_w1
[   23.905432] initcall matrox_w1_init+0x0/0x42 returned 0 after 0 usecs
[   23.905437] calling  ds_init+0x0/0x65 @ 1
[   23.905445] bus: 'usb': add driver DS9490R
[   23.905664] usbcore: registered new interface driver DS9490R
[   23.905675] initcall ds_init+0x0/0x65 returned 0 after 0 usecs
[   23.905679] calling  sensors_ds2482_init+0x0/0x3b @ 1
[   23.905684] bus: 'i2c': add driver ds2482
[   23.905953] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 0 usecs
[   23.905957] calling  w1_therm_init+0x0/0x5b @ 1
[   23.906032] initcall w1_therm_init+0x0/0x5b returned 0 after 0 usecs
[   23.906036] calling  w1_smem_init+0x0/0x65 @ 1
[   23.906041] initcall w1_smem_init+0x0/0x65 returned 0 after 0 usecs
[   23.906045] calling  w1_f2d_init+0x0/0x39 @ 1
[   23.906049] initcall w1_f2d_init+0x0/0x39 returned 0 after 0 usecs
[   23.906053] calling  w1_ds2760_init+0x0/0x51 @ 1
[   23.906055] 1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
[   23.906061] initcall w1_ds2760_init+0x0/0x51 returned 0 after 0 usecs
[   23.906065] calling  w1_bq27000_init+0x0/0x49 @ 1
[   23.906069] initcall w1_bq27000_init+0x0/0x49 returned -17 after 0 usecs
[   23.906074] initcall w1_bq27000_init+0x0/0x49 returned with error code -17 
[   23.906078] calling  pda_power_init+0x0/0x39 @ 1
[   23.906084] bus: 'platform': add driver pda-power
[   23.906308] initcall pda_power_init+0x0/0x39 returned 0 after 0 usecs
[   23.906312] calling  ds2760_battery_init+0x0/0x39 @ 1
[   23.906316] bus: 'platform': add driver ds2760-battery
[   23.906595] initcall ds2760_battery_init+0x0/0x39 returned 0 after 0 usecs
[   23.906600] calling  bq27x00_battery_init+0x0/0x57 @ 1
[   23.906605] bus: 'i2c': add driver bq27200-battery
[   23.906817] initcall bq27x00_battery_init+0x0/0x57 returned 0 after 0 usecs
[   23.906822] calling  da903x_battery_init+0x0/0x3e @ 1
[   23.906827] bus: 'platform': add driver da903x-battery
[   23.907070] initcall da903x_battery_init+0x0/0x3e returned 0 after 0 usecs
[   23.907075] calling  max17040_init+0x0/0x3b @ 1
[   23.907078] bus: 'i2c': add driver max17040
[   23.907291] initcall max17040_init+0x0/0x3b returned 0 after 0 usecs
[   23.907295] calling  pcipcwd_init_module+0x0/0x5c @ 1
[   23.907313] bus: 'pci': add driver pcwd_pci
[   23.907592] initcall pcipcwd_init_module+0x0/0x5c returned 0 after 0 usecs
[   23.907596] calling  wdtpci_init+0x0/0x42 @ 1
[   23.907603] bus: 'pci': add driver wdt_pci
[   23.907864] initcall wdtpci_init+0x0/0x42 returned 0 after 0 usecs
[   23.907868] calling  usb_pcwd_init+0x0/0x70 @ 1
[   23.907879] bus: 'usb': add driver pcwd_usb
[   23.908125] usbcore: registered new interface driver pcwd_usb
[   23.908131] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02
[   23.908136] initcall usb_pcwd_init+0x0/0x70 returned 0 after 0 usecs
[   23.908142] calling  twl4030_wdt_init+0x0/0x3e @ 1
[   23.908147] bus: 'platform': add driver twl4030_wdt
[   23.908361] initcall twl4030_wdt_init+0x0/0x3e returned 0 after 0 usecs
[   23.908365] calling  advwdt_init+0x0/0x83 @ 1
[   23.908368] WDT driver for Advantech single board computer initialising.
[   23.908372] bus: 'platform': add driver advantechwdt
[   23.908622] Registering platform device 'advantechwdt'. Parent at platform
[   23.908628] device: 'advantechwdt': device_add
[   23.908641] bus: 'platform': add device advantechwdt
[   23.908881] bus: 'platform': driver_probe_device: matched device advantechwdt with driver advantechwdt
[   23.908886] bus: 'platform': really_probe: probing driver advantechwdt with device advantechwdt
[   23.908908] device: 'watchdog': device_add
[   23.909178] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[   23.909182] driver: 'advantechwdt': driver_bound: bound to device 'advantechwdt'
[   23.909186] bus: 'platform': really_probe: bound device advantechwdt to driver advantechwdt
[   23.909195] initcall advwdt_init+0x0/0x83 returned 0 after 0 usecs
[   23.909199] calling  watchdog_init+0x0/0x18d @ 1
[   23.909223] initcall watchdog_init+0x0/0x18d returned -19 after 0 usecs
[   23.909227] calling  alim7101_wdt_init+0x0/0x1b7 @ 1
[   23.909229] alim7101_wdt: Steve Hill <[email protected]>.
[   23.909239] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[   23.909243] initcall alim7101_wdt_init+0x0/0x1b7 returned -16 after 0 usecs
[   23.909246] initcall alim7101_wdt_init+0x0/0x1b7 returned with error code -16 
[   23.909250] calling  wafwdt_init+0x0/0x18e @ 1
[   23.909252] WDT driver for Wafer 5823 single board computer initialising.
[   23.909259] Wafer 5823 WDT: I/O address 0x0443 already in use
[   23.909265] initcall wafwdt_init+0x0/0x18e returned -5 after 0 usecs
[   23.909268] initcall wafwdt_init+0x0/0x18e returned with error code -5 
[   23.909272] calling  watchdog_init+0x0/0x8a @ 1
[   23.909274] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
[   23.909278] bus: 'platform': add driver i6300ESB timer
[   23.909525] Registering platform device 'i6300ESB timer'. Parent at platform
[   23.909530] device: 'i6300ESB timer': device_add
[   23.909541] bus: 'platform': add device i6300ESB timer
[   23.909803] bus: 'platform': driver_probe_device: matched device i6300ESB timer with driver i6300ESB timer
[   23.909808] bus: 'platform': really_probe: probing driver i6300ESB timer with device i6300ESB timer
[   23.909849] initcall watchdog_init+0x0/0x8a returned 0 after 0 usecs
[   23.909853] calling  iTCO_wdt_init_module+0x0/0x8a @ 1
[   23.909855] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   23.909859] bus: 'platform': add driver iTCO_wdt
[   23.910131] Registering platform device 'iTCO_wdt'. Parent at platform
[   23.910137] device: 'iTCO_wdt': device_add
[   23.910148] bus: 'platform': add device iTCO_wdt
[   23.910399] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[   23.910403] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[   23.910497] iTCO_wdt: No card detected
[   23.910514] initcall iTCO_wdt_init_module+0x0/0x8a returned 0 after 9765 usecs
[   23.910518] calling  it87_wdt_init+0x0/0x4ee @ 1
[   23.910597] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07
[   23.910601] initcall it87_wdt_init+0x0/0x4ee returned -19 after 0 usecs
[   23.910605] calling  hpwdt_init+0x0/0x42 @ 1
[   23.910626] bus: 'pci': add driver hpwdt
[   23.910923] initcall hpwdt_init+0x0/0x42 returned 0 after 0 usecs
[   23.910927] calling  pc87413_init+0x0/0xb5 @ 1
[   23.910930] pc87413 WDT: Version 1.1 at io 0x2E
[   23.910934] pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
[   23.910939] initcall pc87413_init+0x0/0xb5 returned -16 after 0 usecs
[   23.910943] initcall pc87413_init+0x0/0xb5 returned with error code -16 
[   23.910947] calling  sbc60xxwdt_init+0x0/0x1ab @ 1
[   23.910955] sbc60xxwdt: I/O address 0x0443 already in use
[   23.910959] initcall sbc60xxwdt_init+0x0/0x1ab returned -5 after 0 usecs
[   23.910964] initcall sbc60xxwdt_init+0x0/0x1ab returned with error code -5 
[   23.910968] calling  sbc8360_init+0x0/0x1ca @ 1
[   23.910973] sbc8360: failed to register misc device
[   23.910981] initcall sbc8360_init+0x0/0x1ca returned -16 after 0 usecs
[   23.910985] initcall sbc8360_init+0x0/0x1ca returned with error code -16 
[   23.910989] calling  sch311x_wdt_init+0x0/0x176 @ 1
[   23.911017] initcall sch311x_wdt_init+0x0/0x176 returned -19 after 0 usecs
[   23.911022] calling  wb_smsc_wdt_init+0x0/0x1de @ 1
[   23.911024] SMsC 37B787 watchdog component driver 1.1 initialising...
[   23.912089] smsc37b787_wdt: Unable to register miscdev on minor 130
[   23.912096] initcall wb_smsc_wdt_init+0x0/0x1de returned -16 after 0 usecs
[   23.912100] initcall wb_smsc_wdt_init+0x0/0x1de returned with error code -16 
[   23.912105] calling  w83877f_wdt_init+0x0/0x183 @ 1
[   23.912111] w83877f_wdt: I/O address 0x0443 already in use
[   23.912118] initcall w83877f_wdt_init+0x0/0x183 returned -5 after 0 usecs
[   23.912122] initcall w83877f_wdt_init+0x0/0x183 returned with error code -5 
[   23.912126] calling  watchdog_init+0x0/0xde @ 1
[   23.912131] epx_c3: cannot register miscdev on minor=130 (err=-16)
[   23.912137] initcall watchdog_init+0x0/0xde returned -16 after 0 usecs
[   23.912141] initcall watchdog_init+0x0/0xde returned with error code -16 
[   23.912145] calling  watchdog_init+0x0/0xdb @ 1
[   23.912148] SoftDog: cannot register miscdev on minor=130 (err=-16)
[   23.912153] initcall watchdog_init+0x0/0xdb returned -16 after 0 usecs
[   23.912157] initcall watchdog_init+0x0/0xdb returned with error code -16 
[   23.912161] calling  telephony_init+0x0/0x71 @ 1
[   23.912163] Linux telephony interface: v1.00
[   23.912175] initcall telephony_init+0x0/0x71 returned 0 after 0 usecs
[   23.912178] calling  vhci_init+0x0/0x73 @ 1
[   23.912181] Bluetooth: Virtual HCI driver ver 1.3
[   23.912191] device: 'vhci': device_add
[   23.912476] initcall vhci_init+0x0/0x73 returned 0 after 0 usecs
[   23.912480] calling  hci_uart_init+0x0/0x109 @ 1
[   23.912483] Bluetooth: HCI UART driver ver 2.2
[   23.912486] Bluetooth: HCI H4 protocol initialized
[   23.912489] Bluetooth: HCILL protocol initialized
[   23.912493] initcall hci_uart_init+0x0/0x109 returned 0 after 0 usecs
[   23.912497] calling  bpa10x_init+0x0/0x55 @ 1
[   23.912499] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[   23.912510] bus: 'usb': add driver bpa10x
[   23.912728] usbcore: registered new interface driver bpa10x
[   23.912737] initcall bpa10x_init+0x0/0x55 returned 0 after 0 usecs
[   23.912741] calling  bfusb_init+0x0/0x78 @ 1
[   23.912743] Bluetooth: BlueFRITZ! USB driver ver 1.2
[   23.912748] bus: 'usb': add driver bfusb
[   23.912992] usbcore: registered new interface driver bfusb
[   23.913000] initcall bfusb_init+0x0/0x78 returned 0 after 0 usecs
[   23.913004] calling  btusb_init+0x0/0x55 @ 1
[   23.913007] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   23.913012] bus: 'usb': add driver btusb
[   23.913235] usbcore: registered new interface driver btusb
[   23.913244] initcall btusb_init+0x0/0x55 returned 0 after 0 usecs
[   23.913248] calling  btsdio_init+0x0/0x4c @ 1
[   23.913250] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   23.913255] bus: 'sdio': add driver btsdio
[   23.913508] initcall btsdio_init+0x0/0x4c returned 0 after 0 usecs
[   23.913513] calling  isdn_init+0x0/0x35c @ 1
[   23.916520] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2
[   23.916536] initcall isdn_init+0x0/0x35c returned 0 after 0 usecs
[   23.916540] calling  isdn_bsdcomp_init+0x0/0x55 @ 1
[   23.916542] PPP BSD Compression module registered
[   23.916546] initcall isdn_bsdcomp_init+0x0/0x55 returned 0 after 0 usecs
[   23.916549] calling  divert_init+0x0/0x8a @ 1
[   23.916583] dss1_divert module successfully installed
[   23.916587] initcall divert_init+0x0/0x8a returned 0 after 0 usecs
[   23.916590] calling  cpufreq_stats_init+0x0/0xca @ 1
[   23.916669] initcall cpufreq_stats_init+0x0/0xca returned 0 after 0 usecs
[   23.916673] calling  cpufreq_gov_userspace_init+0x0/0x39 @ 1
[   23.916678] initcall cpufreq_gov_userspace_init+0x0/0x39 returned 0 after 0 usecs
[   23.916682] calling  cpufreq_gov_dbs_init+0x0/0xd5 @ 1
[   23.921086] initcall cpufreq_gov_dbs_init+0x0/0xd5 returned 0 after 9765 usecs
[   23.921091] calling  i7300_idle_init+0x0/0x649 @ 1
[   23.921183] initcall i7300_idle_init+0x0/0x649 returned -19 after 0 usecs
[   23.921187] calling  mmc_test_init+0x0/0x39 @ 1
[   23.921192] bus: 'mmc': add driver mmc_test
[   23.923942] initcall mmc_test_init+0x0/0x39 returned 0 after 0 usecs
[   23.923947] calling  sdio_uart_init+0x0/0x11a @ 1
[   23.923979] bus: 'sdio': add driver sdio_uart
[   23.924202] initcall sdio_uart_init+0x0/0x11a returned 0 after 0 usecs
[   23.924207] calling  wbsd_drv_init+0x0/0xb5 @ 1
[   23.924209] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   23.924212] wbsd: Copyright(c) Pierre Ossman
[   23.924220] bus: 'platform': add driver wbsd
[   23.924478] Registering platform device 'wbsd'. Parent at platform
[   23.924484] device: 'wbsd': device_add
[   23.924498] bus: 'platform': add device wbsd
[   23.924725] bus: 'platform': driver_probe_device: matched device wbsd with driver wbsd
[   23.924729] bus: 'platform': really_probe: probing driver wbsd with device wbsd
[   23.924965] initcall wbsd_drv_init+0x0/0xb5 returned 0 after 0 usecs
[   23.924969] calling  memstick_init+0x0/0xab @ 1
[   23.925344] bus: 'memstick': registered
[   23.925347] device class 'memstick_host': registering
[   23.925592] initcall memstick_init+0x0/0xab returned 0 after 0 usecs
[   23.925597] calling  tifm_ms_init+0x0/0x39 @ 1
[   23.925601] bus: 'tifm': add driver tifm_ms
[   23.925821] initcall tifm_ms_init+0x0/0x39 returned 0 after 0 usecs
[   23.925825] calling  bd2802_init+0x0/0x3b @ 1
[   23.925831] bus: 'i2c': add driver BD2802
[   23.926080] initcall bd2802_init+0x0/0x3b returned 0 after 0 usecs
[   23.926085] calling  alix_led_init+0x0/0x132 @ 1
[   23.931221] initcall alix_led_init+0x0/0x132 returned -19 after 9765 usecs
[   23.931225] calling  pca9532_init+0x0/0x3b @ 1
[   23.931229] bus: 'i2c': add driver pca9532
[   23.931449] initcall pca9532_init+0x0/0x3b returned 0 after 0 usecs
[   23.931453] calling  gpio_led_init+0x0/0x2d @ 1
[   23.931457] initcall gpio_led_init+0x0/0x2d returned 0 after 0 usecs
[   23.931461] calling  dac124s085_leds_init+0x0/0x39 @ 1
[   23.931467] bus: 'spi': add driver dac124s085
[   23.931710] initcall dac124s085_leds_init+0x0/0x39 returned 0 after 0 usecs
[   23.931715] calling  timer_trig_init+0x0/0x39 @ 1
[   23.931723] initcall timer_trig_init+0x0/0x39 returned 0 after 0 usecs
[   23.931727] calling  heartbeat_trig_init+0x0/0x39 @ 1
[   23.931733] initcall heartbeat_trig_init+0x0/0x39 returned 0 after 0 usecs
[   23.931737] calling  gpio_trig_init+0x0/0x39 @ 1
[   23.931742] initcall gpio_trig_init+0x0/0x39 returned 0 after 0 usecs
[   23.931746] calling  ib_core_init+0x0/0x6a @ 1
[   23.931748] device class 'infiniband': registering
[   23.931998] initcall ib_core_init+0x0/0x6a returned 0 after 0 usecs
[   23.932002] calling  ib_mad_init_module+0x0/0xca @ 1
[   23.932521] initcall ib_mad_init_module+0x0/0xca returned 0 after 0 usecs
[   23.932525] calling  ib_sa_init+0x0/0xc1 @ 1
[   23.932625] initcall ib_sa_init+0x0/0xc1 returned 0 after 0 usecs
[   23.932629] calling  ib_cm_init+0x0/0x180 @ 1
[   23.932703] device class 'infiniband_cm': registering
[   23.950396] initcall ib_cm_init+0x0/0x180 returned 0 after 19531 usecs
[   23.950402] calling  iw_cm_init+0x0/0x5c @ 1
[   23.950487] initcall iw_cm_init+0x0/0x5c returned 0 after 0 usecs
[   23.950492] calling  addr_init+0x0/0x6d @ 1
[   23.950628] initcall addr_init+0x0/0x6d returned 0 after 0 usecs
[   23.950632] calling  cma_init+0x0/0x108 @ 1
[   23.950731] initcall cma_init+0x0/0x108 returned 0 after 0 usecs
[   23.950735] calling  mthca_init+0x0/0x1a7 @ 1
[   23.950837] bus: 'pci': add driver ib_mthca
[   23.951197] initcall mthca_init+0x0/0x1a7 returned 0 after 0 usecs
[   23.951201] calling  infinipath_init+0x0/0xe9 @ 1
[   23.951255] bus: 'pci': add driver ib_ipath
[   23.951511] initcall infinipath_init+0x0/0xe9 returned 0 after 0 usecs
[   23.951515] calling  c2_init_module+0x0/0x42 @ 1
[   23.951522] bus: 'pci': add driver c2
[   23.951801] initcall c2_init_module+0x0/0x42 returned 0 after 0 usecs
[   23.951805] calling  nes_init_module+0x0/0x17f @ 1
[   23.952051] bus: 'pci': add driver iw_nes
[   23.952328] initcall nes_init_module+0x0/0x17f returned 0 after 0 usecs
[   23.952333] calling  ipoib_init_module+0x0/0x12d @ 1
[   23.952464] initcall ipoib_init_module+0x0/0x12d returned 0 after 0 usecs
[   23.952469] calling  srp_init_module+0x0/0x116 @ 1
[   23.952479] device class 'infiniband_srp': registering
[   23.952705] initcall srp_init_module+0x0/0x116 returned 0 after 0 usecs
[   23.952710] calling  dcdrbu_init+0x0/0x169 @ 1
[   23.952733] Registering platform device 'dell_rbu'. Parent at platform
[   23.952747] device: 'dell_rbu': device_add
[   23.952762] bus: 'platform': add device dell_rbu
[   23.953051] initcall dcdrbu_init+0x0/0x169 returned 0 after 0 usecs
[   23.953056] calling  dcdbas_init+0x0/0x8d @ 1
[   23.953063] bus: 'platform': add driver dcdbas
[   23.953284] Registering platform device 'dcdbas'. Parent at platform
[   23.953289] device: 'dcdbas': device_add
[   23.953300] bus: 'platform': add device dcdbas
[   23.953552] bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas
[   23.953556] bus: 'platform': really_probe: probing driver dcdbas with device dcdbas
[   23.953586] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   23.953590] driver: 'dcdbas': driver_bound: bound to device 'dcdbas'
[   23.953594] bus: 'platform': really_probe: bound device dcdbas to driver dcdbas
[   23.953602] initcall dcdbas_init+0x0/0x8d returned 0 after 0 usecs
[   23.953605] calling  hifn_init+0x0/0x3e @ 1
[   23.953607] HIFN supports only 32-bit addresses.
[   23.953611] initcall hifn_init+0x0/0x3e returned -22 after 0 usecs
[   23.953614] initcall hifn_init+0x0/0x3e returned with error code -22 
[   23.953618] calling  ioat_init_module+0x0/0x42 @ 1
[   23.953633] bus: 'pci': add driver ioatdma
[   23.953892] initcall ioat_init_module+0x0/0x42 returned 0 after 0 usecs
[   23.953897] calling  hid_init+0x0/0x55 @ 1
[   23.954173] bus: 'hid': registered
[   23.954177] initcall hid_init+0x0/0x55 returned 0 after 0 usecs
[   23.954183] calling  apple_init+0x0/0x63 @ 1
[   23.954187] bus: 'hid': add driver apple
[   23.954396] initcall apple_init+0x0/0x63 returned 0 after 0 usecs
[   23.954401] calling  belkin_init+0x0/0x47 @ 1
[   23.954404] bus: 'hid': add driver belkin
[   23.954648] initcall belkin_init+0x0/0x47 returned 0 after 0 usecs
[   23.954652] calling  ch_init+0x0/0x47 @ 1
[   23.954656] bus: 'hid': add driver cherry
[   23.954864] initcall ch_init+0x0/0x47 returned 0 after 0 usecs
[   23.954869] calling  dr_init+0x0/0x42 @ 1
[   23.954872] bus: 'hid': add driver dragonrise
[   23.955141] initcall dr_init+0x0/0x42 returned 0 after 0 usecs
[   23.955145] calling  ez_init+0x0/0x47 @ 1
[   23.955149] bus: 'hid': add driver ezkey
[   23.955368] initcall ez_init+0x0/0x47 returned 0 after 0 usecs
[   23.955372] calling  gyration_init+0x0/0x47 @ 1
[   23.955376] bus: 'hid': add driver gyration
[   23.955619] initcall gyration_init+0x0/0x47 returned 0 after 0 usecs
[   23.955623] calling  ks_init+0x0/0x47 @ 1
[   23.955627] bus: 'hid': add driver kensington
[   23.955837] initcall ks_init+0x0/0x47 returned 0 after 0 usecs
[   23.955841] calling  lg_init+0x0/0x47 @ 1
[   23.955845] bus: 'hid': add driver logitech
[   23.956087] initcall lg_init+0x0/0x47 returned 0 after 0 usecs
[   23.956092] calling  ms_init+0x0/0x47 @ 1
[   23.956096] bus: 'hid': add driver microsoft
[   23.956318] initcall ms_init+0x0/0x47 returned 0 after 0 usecs
[   23.956322] calling  mr_init+0x0/0x47 @ 1
[   23.956326] bus: 'hid': add driver monterey
[   23.956578] initcall mr_init+0x0/0x47 returned 0 after 0 usecs
[   23.956583] calling  ntrig_init+0x0/0x47 @ 1
[   23.956587] bus: 'hid': add driver ntrig
[   23.956808] initcall ntrig_init+0x0/0x47 returned 0 after 0 usecs
[   23.956812] calling  sony_init+0x0/0x47 @ 1
[   23.956816] bus: 'hid': add driver sony
[   23.957073] initcall sony_init+0x0/0x47 returned 0 after 0 usecs
[   23.957078] calling  sp_init+0x0/0x47 @ 1
[   23.957082] bus: 'hid': add driver sunplus
[   23.957292] initcall sp_init+0x0/0x47 returned 0 after 0 usecs
[   23.957296] calling  tm_init+0x0/0x47 @ 1
[   23.957300] bus: 'hid': add driver thrustmaster
[   23.957577] initcall tm_init+0x0/0x47 returned 0 after 0 usecs
[   23.957581] calling  ts_init+0x0/0x47 @ 1
[   23.957585] bus: 'hid': add driver topseed
[   23.957793] initcall ts_init+0x0/0x47 returned 0 after 0 usecs
[   23.957798] calling  zp_init+0x0/0x47 @ 1
[   23.957801] bus: 'hid': add driver zeroplus
[   23.958064] initcall zp_init+0x0/0x47 returned 0 after 0 usecs
[   23.958068] calling  wacom_init+0x0/0x71 @ 1
[   23.958072] bus: 'hid': add driver wacom
[   23.958278] wacom driver registered
[   23.958283] initcall wacom_init+0x0/0x71 returned 0 after 0 usecs
[   23.958288] calling  hid_init+0x0/0xf1 @ 1
[   23.958419] bus: 'hid': add driver generic-usb
[   23.958688] bus: 'usb': add driver hiddev
[   23.958943] usbcore: registered new interface driver hiddev
[   23.958963] bus: 'usb': add driver usbhid
[   23.959171] usbcore: registered new interface driver usbhid
[   23.959177] usbhid: v2.6:USB HID core driver
[   23.959183] initcall hid_init+0x0/0xf1 returned 0 after 0 usecs
[   23.959187] calling  usb_mouse_init+0x0/0x5e @ 1
[   23.959192] bus: 'usb': add driver usbmouse
[   23.959444] usbcore: registered new interface driver usbmouse
[   23.959451] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[   23.959456] initcall usb_mouse_init+0x0/0x5e returned 0 after 0 usecs
[   23.959460] calling  virtio_pci_init+0x0/0x7b @ 1
[   23.959471] device: 'virtio-pci': device_add
[   23.959505] bus: 'pci': add driver virtio-pci
[   23.959766] initcall virtio_pci_init+0x0/0x7b returned 0 after 0 usecs
[   23.959770] calling  dell_init+0x0/0x32 @ 1
[   23.959774] initcall dell_init+0x0/0x32 returned -19 after 0 usecs
[   23.959778] calling  init_soundcore+0x0/0xa5 @ 1
[   23.959791] device class 'sound': registering
[   23.960111] initcall init_soundcore+0x0/0xa5 returned 0 after 9765 usecs
[   23.960116] calling  alsa_sound_init+0x0/0xba @ 1
[   23.960281] Advanced Linux Sound Architecture Driver Version 1.0.20.
[   23.960287] initcall alsa_sound_init+0x0/0xba returned 0 after 0 usecs
[   23.960291] calling  alsa_hwdep_init+0x0/0x8a @ 1
[   23.960343] initcall alsa_hwdep_init+0x0/0x8a returned 0 after 0 usecs
[   23.960348] calling  alsa_timer_init+0x0/0x1a6 @ 1
[   23.960405] device: 'timer': device_add
[   23.960715] initcall alsa_timer_init+0x0/0x1a6 returned 0 after 0 usecs
[   23.960720] calling  rtctimer_init+0x0/0x148 @ 1
[   23.960728] initcall rtctimer_init+0x0/0x148 returned 0 after 0 usecs
[   23.960732] calling  alsa_pcm_init+0x0/0x92 @ 1
[   23.960749] initcall alsa_pcm_init+0x0/0x92 returned 0 after 0 usecs
[   23.960753] calling  snd_mem_init+0x0/0x53 @ 1
[   23.960767] initcall snd_mem_init+0x0/0x53 returned 0 after 0 usecs
[   23.960771] calling  alsa_rawmidi_init+0x0/0xcb @ 1
[   23.960778] initcall alsa_rawmidi_init+0x0/0xcb returned 0 after 0 usecs
[   23.960782] calling  alsa_mixer_oss_init+0x0/0x63 @ 1
[   23.960787] initcall alsa_mixer_oss_init+0x0/0x63 returned 0 after 0 usecs
[   23.960791] calling  alsa_pcm_oss_init+0x0/0xc8 @ 1
[   23.960809] initcall alsa_pcm_oss_init+0x0/0xc8 returned 0 after 0 usecs
[   23.960813] calling  alsa_akm4xxx_module_init+0x0/0x2d @ 1
[   23.960818] initcall alsa_akm4xxx_module_init+0x0/0x2d returned 0 after 0 usecs
[   23.960822] calling  alsa_tea575x_module_init+0x0/0x2d @ 1
[   23.960827] initcall alsa_tea575x_module_init+0x0/0x2d returned 0 after 0 usecs
[   23.960831] calling  alsa_i2c_init+0x0/0x2d @ 1
[   23.960835] initcall alsa_i2c_init+0x0/0x2d returned 0 after 0 usecs
[   23.960839] calling  alsa_opl3_init+0x0/0x2d @ 1
[   23.960843] initcall alsa_opl3_init+0x0/0x2d returned 0 after 0 usecs
[   23.960848] calling  alsa_mpu401_uart_init+0x0/0x2d @ 1
[   23.960852] initcall alsa_mpu401_uart_init+0x0/0x2d returned 0 after 0 usecs
[   23.960856] calling  alsa_sb_common_init+0x0/0x2d @ 1
[   23.960860] initcall alsa_sb_common_init+0x0/0x2d returned 0 after 0 usecs
[   23.960865] calling  alsa_sb16_init+0x0/0x2d @ 1
[   23.960869] initcall alsa_sb16_init+0x0/0x2d returned 0 after 0 usecs
[   23.960873] calling  alsa_ad1889_init+0x0/0x42 @ 1
[   23.960890] bus: 'pci': add driver AD1889 Audio
[   23.961234] initcall alsa_ad1889_init+0x0/0x42 returned 0 after 0 usecs
[   23.961238] calling  alsa_card_als4000_init+0x0/0x42 @ 1
[   23.961247] bus: 'pci': add driver ALS4000
[   23.961481] initcall alsa_card_als4000_init+0x0/0x42 returned 0 after 0 usecs
[   23.961486] calling  alsa_card_atiixp_init+0x0/0x42 @ 1
[   23.961493] bus: 'pci': add driver ATI IXP MC97 controller
[   23.961757] initcall alsa_card_atiixp_init+0x0/0x42 returned 0 after 0 usecs
[   23.961762] calling  alsa_card_bt87x_init+0x0/0x56 @ 1
[   23.961770] bus: 'pci': add driver Bt87x
[   23.962006] initcall alsa_card_bt87x_init+0x0/0x56 returned 0 after 0 usecs
[   23.962011] calling  alsa_card_cmipci_init+0x0/0x42 @ 1
[   23.962019] bus: 'pci': add driver C-Media PCI
[   23.962307] initcall alsa_card_cmipci_init+0x0/0x42 returned 0 after 0 usecs
[   23.962312] calling  alsa_card_cs5530_init+0x0/0x42 @ 1
[   23.962319] bus: 'pci': add driver CS5530_Audio
[   23.962555] initcall alsa_card_cs5530_init+0x0/0x42 returned 0 after 0 usecs
[   23.962560] calling  alsa_card_es1968_init+0x0/0x42 @ 1
[   23.962568] bus: 'pci': add driver ES1968 (ESS Maestro)
[   23.962857] initcall alsa_card_es1968_init+0x0/0x42 returned 0 after 0 usecs
[   23.962862] calling  alsa_card_fm801_init+0x0/0x42 @ 1
[   23.962870] bus: 'pci': add driver FM801
[   23.963108] initcall alsa_card_fm801_init+0x0/0x42 returned 0 after 0 usecs
[   23.963113] calling  alsa_card_intel8x0_init+0x0/0x42 @ 1
[   23.963121] bus: 'pci': add driver Intel ICH
[   23.963143] bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver Intel ICH
[   23.963147] bus: 'pci': really_probe: probing driver Intel ICH with device 0000:00:04.0
[   23.963382] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
[   23.963392] Intel ICH 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3
[   23.963441] Intel ICH 0000:00:04.0: setting latency timer to 64
[   24.300018] intel8x0_measure_ac97_clock: measured 60000 usecs (2936 samples)
[   24.300021] intel8x0: clocking to 47084
[   24.300053] device: 'pcmC0D2p': device_add
[   24.300473] device: 'pcmC0D1c': device_add
[   24.300774] device: 'adsp': device_add
[   24.301033] device: 'pcmC0D0p': device_add
[   24.301292] device: 'pcmC0D0c': device_add
[   24.301538] device: 'dsp': device_add
[   24.301809] device: 'audio': device_add
[   24.302081] device: '0-0:ALC850': device_add
[   24.302101] bus: 'ac97': add device 0-0:ALC850
[   24.302361] device: 'controlC0': device_add
[   24.302664] device: 'mixer': device_add
[   24.303581] driver: '0000:00:04.0': driver_bound: bound to device 'Intel ICH'
[   24.303588] bus: 'pci': really_probe: bound device 0000:00:04.0 to driver Intel ICH
[   24.303833] initcall alsa_card_intel8x0_init+0x0/0x42 returned 0 after 332031 usecs
[   24.303839] calling  alsa_card_m3_init+0x0/0x42 @ 1
[   24.303862] bus: 'pci': add driver Maestro3
[   24.304185] initcall alsa_card_m3_init+0x0/0x42 returned 0 after 0 usecs
[   24.304190] calling  alsa_card_rme96_init+0x0/0x42 @ 1
[   24.304198] bus: 'pci': add driver RME Digi96
[   24.304433] initcall alsa_card_rme96_init+0x0/0x42 returned 0 after 0 usecs
[   24.304438] calling  alsa_card_via82xx_init+0x0/0x42 @ 1
[   24.304445] bus: 'pci': add driver VIA 82xx Audio
[   24.304713] initcall alsa_card_via82xx_init+0x0/0x42 returned 0 after 0 usecs
[   24.304718] calling  alsa_card_via82xx_init+0x0/0x42 @ 1
[   24.304726] bus: 'pci': add driver VIA 82xx Modem
[   24.304961] initcall alsa_card_via82xx_init+0x0/0x42 returned 0 after 0 usecs
[   24.304966] calling  alsa_ac97_init+0x0/0x2d @ 1
[   24.304970] initcall alsa_ac97_init+0x0/0x2d returned 0 after 0 usecs
[   24.304974] calling  alsa_card_ali_init+0x0/0x42 @ 1
[   24.304982] bus: 'pci': add driver ALI 5451
[   24.305259] initcall alsa_card_ali_init+0x0/0x42 returned 0 after 0 usecs
[   24.305264] calling  alsa_card_vortex_init+0x0/0x42 @ 1
[   24.305272] bus: 'pci': add driver au8810
[   24.305507] initcall alsa_card_vortex_init+0x0/0x42 returned 0 after 0 usecs
[   24.305512] calling  alsa_card_vortex_init+0x0/0x42 @ 1
[   24.305520] bus: 'pci': add driver au8830
[   24.305803] initcall alsa_card_vortex_init+0x0/0x42 returned 0 after 0 usecs
[   24.305808] calling  ct_card_init+0x0/0x42 @ 1
[   24.305815] bus: 'pci': add driver SB-XFi
[   24.306052] initcall ct_card_init+0x0/0x42 returned 0 after 0 usecs
[   24.306057] calling  alsa_card_ca0106_init+0x0/0x42 @ 1
[   24.306065] bus: 'pci': add driver CA0106
[   24.306334] initcall alsa_card_ca0106_init+0x0/0x42 returned 0 after 0 usecs
[   24.306339] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.306347] bus: 'pci': add driver Echoaudio Darla20
[   24.306604] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.306609] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.306617] bus: 'pci': add driver Echoaudio Gina20
[   24.306902] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.306906] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.306915] bus: 'pci': add driver Echoaudio Darla24
[   24.307150] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.307155] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.307163] bus: 'pci': add driver Echoaudio Layla24
[   24.307453] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.307458] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.307466] bus: 'pci': add driver Echoaudio Mia
[   24.307724] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.307729] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.307738] bus: 'pci': add driver Echoaudio Echo3G
[   24.308010] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.308015] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.308023] bus: 'pci': add driver Echoaudio Indigo DJ
[   24.308256] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.308261] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.308269] bus: 'pci': add driver Echoaudio Indigo IOx
[   24.308524] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.308529] calling  alsa_card_echo_init+0x0/0x42 @ 1
[   24.308537] bus: 'pci': add driver Echoaudio Indigo DJx
[   24.308787] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[   24.308792] calling  alsa_card_emu10k1_init+0x0/0x42 @ 1
[   24.308801] bus: 'pci': add driver EMU10K1_Audigy
[   24.309089] initcall alsa_card_emu10k1_init+0x0/0x42 returned 0 after 0 usecs
[   24.309094] calling  alsa_card_emu10k1x_init+0x0/0x42 @ 1
[   24.309103] bus: 'pci': add driver EMU10K1X
[   24.309341] initcall alsa_card_emu10k1x_init+0x0/0x42 returned 0 after 0 usecs
[   24.309346] calling  patch_cmedia_init+0x0/0x39 @ 1
[   24.309418] initcall patch_cmedia_init+0x0/0x39 returned 0 after 0 usecs
[   24.309423] calling  patch_sigmatel_init+0x0/0x39 @ 1
[   24.309428] initcall patch_sigmatel_init+0x0/0x39 returned 0 after 0 usecs
[   24.309432] calling  patch_ca0110_init+0x0/0x39 @ 1
[   24.309437] initcall patch_ca0110_init+0x0/0x39 returned 0 after 0 usecs
[   24.309441] calling  patch_nvhdmi_init+0x0/0x39 @ 1
[   24.309446] initcall patch_nvhdmi_init+0x0/0x39 returned 0 after 0 usecs
[   24.309450] calling  patch_intelhdmi_init+0x0/0x39 @ 1
[   24.309455] initcall patch_intelhdmi_init+0x0/0x39 returned 0 after 0 usecs
[   24.309460] calling  alsa_card_azx_init+0x0/0x42 @ 1
[   24.309471] bus: 'pci': add driver HDA Intel
[   24.309769] initcall alsa_card_azx_init+0x0/0x42 returned 0 after 0 usecs
[   24.309774] calling  alsa_card_ice1724_init+0x0/0x42 @ 1
[   24.309782] bus: 'pci': add driver ICE1724
[   24.310063] initcall alsa_card_ice1724_init+0x0/0x42 returned 0 after 9765 usecs
[   24.310069] calling  alsa_ice1712_akm4xxx_module_init+0x0/0x2d @ 1
[   24.310073] initcall alsa_ice1712_akm4xxx_module_init+0x0/0x2d returned 0 after 0 usecs
[   24.310078] calling  alsa_card_mixart_init+0x0/0x42 @ 1
[   24.310088] bus: 'pci': add driver Digigram miXart
[   24.310380] initcall alsa_card_mixart_init+0x0/0x42 returned 0 after 0 usecs
[   24.310385] calling  alsa_card_nm256_init+0x0/0x42 @ 1
[   24.310394] bus: 'pci': add driver NeoMagic 256
[   24.310670] initcall alsa_card_nm256_init+0x0/0x42 returned 0 after 0 usecs
[   24.310675] calling  alsa_card_hifier_init+0x0/0x42 @ 1
[   24.310683] bus: 'pci': add driver CMI8787HiFier
[   24.310957] initcall alsa_card_hifier_init+0x0/0x42 returned 0 after 0 usecs
[   24.310962] calling  alsa_card_oxygen_init+0x0/0x42 @ 1
[   24.310971] bus: 'pci': add driver CMI8788
[   24.311221] initcall alsa_card_oxygen_init+0x0/0x42 returned 0 after 0 usecs
[   24.311226] calling  alsa_card_xonar_init+0x0/0x42 @ 1
[   24.311235] bus: 'pci': add driver AV200
[   24.311518] initcall alsa_card_xonar_init+0x0/0x42 returned 0 after 0 usecs
[   24.311523] calling  pcxhr_module_init+0x0/0x42 @ 1
[   24.311532] bus: 'pci': add driver Digigram pcxhr
[   24.311772] initcall pcxhr_module_init+0x0/0x42 returned 0 after 0 usecs
[   24.311777] calling  alsa_card_riptide_init+0x0/0x77 @ 1
[   24.311785] bus: 'pci': add driver RIPTIDE
[   24.312071] bus: 'pci': add driver Riptide Joystick
[   24.312319] initcall alsa_card_riptide_init+0x0/0x77 returned 0 after 0 usecs
[   24.312325] calling  alsa_card_hammerfall_init+0x0/0x42 @ 1
[   24.312334] bus: 'pci': add driver RME Digi9652 (Hammerfall)
[   24.312618] initcall alsa_card_hammerfall_init+0x0/0x42 returned 0 after 0 usecs
[   24.312623] calling  alsa_card_hdsp_init+0x0/0x42 @ 1
[   24.312632] bus: 'pci': add driver RME Hammerfall DSP
[   24.312897] initcall alsa_card_hdsp_init+0x0/0x42 returned 0 after 0 usecs
[   24.312902] calling  alsa_card_hdspm_init+0x0/0x42 @ 1
[   24.312911] bus: 'pci': add driver RME Hammerfall DSP MADI
[   24.313186] initcall alsa_card_hdspm_init+0x0/0x42 returned 0 after 0 usecs
[   24.313191] calling  alsa_card_trident_init+0x0/0x42 @ 1
[   24.313200] bus: 'pci': add driver Trident4DWaveAudio
[   24.313440] initcall alsa_card_trident_init+0x0/0x42 returned 0 after 0 usecs
[   24.313445] calling  alsa_card_ymfpci_init+0x0/0x42 @ 1
[   24.313453] bus: 'pci': add driver Yamaha DS-1 PCI
[   24.313736] initcall alsa_card_ymfpci_init+0x0/0x42 returned 0 after 0 usecs
[   24.313741] calling  alsa_util_mem_init+0x0/0x2d @ 1
[   24.313746] initcall alsa_util_mem_init+0x0/0x2d returned 0 after 0 usecs
[   24.313750] calling  snd_usX2Y_module_init+0x0/0x42 @ 1
[   24.313763] bus: 'usb': add driver snd-usb-usx2y
[   24.313995] usbcore: registered new interface driver snd-usb-usx2y
[   24.314005] initcall snd_usX2Y_module_init+0x0/0x42 returned 0 after 0 usecs
[   24.314009] calling  snd_module_init+0x0/0x42 @ 1
[   24.314015] bus: 'usb': add driver snd-usb-caiaq
[   24.314261] usbcore: registered new interface driver snd-usb-caiaq
[   24.314270] initcall snd_module_init+0x0/0x42 returned 0 after 0 usecs
[   24.314274] calling  snd_soc_init+0x0/0x74 @ 1
[   24.314297] bus: 'platform': add driver soc-audio
[   24.314533] initcall snd_soc_init+0x0/0x74 returned 0 after 0 usecs
[   24.314538] calling  ad73311_init+0x0/0x39 @ 1
[   24.314541] No device for DAI AD73311
[   24.314608] initcall ad73311_init+0x0/0x39 returned 0 after 0 usecs
[   24.314613] calling  ak4104_init+0x0/0x45 @ 1
[   24.314615] Asahi Kasei AK4104 ALSA SoC Codec Driver
[   24.314621] bus: 'spi': add driver ak4104
[   24.314881] initcall ak4104_init+0x0/0x45 returned 0 after 0 usecs
[   24.314886] calling  ak4535_modinit+0x0/0x39 @ 1
[   24.314889] No device for DAI AK4535
[   24.314893] initcall ak4535_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.314898] calling  cs4270_init+0x0/0x47 @ 1
[   24.314900] Cirrus Logic CS4270 ALSA SoC Codec Driver
[   24.314906] bus: 'i2c': add driver cs4270
[   24.315144] initcall cs4270_init+0x0/0x47 returned 0 after 0 usecs
[   24.315149] calling  pcm3008_init+0x0/0x39 @ 1
[   24.315151] No device for DAI PCM3008 HiFi
[   24.315156] initcall pcm3008_init+0x0/0x39 returned 0 after 0 usecs
[   24.315161] calling  dit_modinit+0x0/0x39 @ 1
[   24.315166] bus: 'platform': add driver spdif-dit
[   24.315416] initcall dit_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.315421] calling  ssm2602_modinit+0x0/0x39 @ 1
[   24.315424] No device for DAI SSM2602
[   24.315428] initcall ssm2602_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.315433] calling  tlv320aic23_modinit+0x0/0x39 @ 1
[   24.315436] No device for DAI tlv320aic23
[   24.315440] initcall tlv320aic23_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.315445] calling  aic26_init+0x0/0x39 @ 1
[   24.315449] bus: 'spi': add driver tlv320aic26
[   24.315695] initcall aic26_init+0x0/0x39 returned 0 after 0 usecs
[   24.315699] calling  aic3x_modinit+0x0/0x39 @ 1
[   24.315702] No device for DAI tlv320aic3x
[   24.315707] initcall aic3x_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.315711] calling  twl4030_modinit+0x0/0x3e @ 1
[   24.315714] No device for DAI twl4030
[   24.315717] No device for DAI twl4030 Voice
[   24.315721] initcall twl4030_modinit+0x0/0x3e returned 0 after 0 usecs
[   24.315726] calling  uda134x_init+0x0/0x39 @ 1
[   24.315728] No device for DAI UDA134X
[   24.315733] initcall uda134x_init+0x0/0x39 returned 0 after 0 usecs
[   24.315737] calling  uda1380_modinit+0x0/0x3e @ 1
[   24.315740] No device for DAI UDA1380
[   24.315743] No device for DAI UDA1380
[   24.315745] No device for DAI UDA1380
[   24.315750] initcall uda1380_modinit+0x0/0x3e returned 0 after 0 usecs
[   24.315754] calling  wm8510_modinit+0x0/0x39 @ 1
[   24.315757] No device for DAI WM8510 HiFi
[   24.315761] initcall wm8510_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.315766] calling  wm8580_modinit+0x0/0x51 @ 1
[   24.315770] bus: 'i2c': add driver wm8580
[   24.316018] initcall wm8580_modinit+0x0/0x51 returned 0 after 0 usecs
[   24.316023] calling  wm8728_modinit+0x0/0x39 @ 1
[   24.316026] No device for DAI WM8728
[   24.316030] initcall wm8728_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.316035] calling  wm8731_modinit+0x0/0x71 @ 1
[   24.316039] bus: 'i2c': add driver WM8731 I2C Codec
[   24.316263] bus: 'spi': add driver wm8731
[   24.316507] initcall wm8731_modinit+0x0/0x71 returned 0 after 0 usecs
[   24.316513] calling  wm8750_modinit+0x0/0x39 @ 1
[   24.316515] No device for DAI WM8750
[   24.316520] initcall wm8750_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.316524] calling  wm8753_modinit+0x0/0x71 @ 1
[   24.316529] bus: 'i2c': add driver wm8753
[   24.316750] bus: 'spi': add driver wm8753
[   24.316995] initcall wm8753_modinit+0x0/0x71 returned 0 after 0 usecs
[   24.317001] calling  wm8900_modinit+0x0/0x3b @ 1
[   24.317005] bus: 'i2c': add driver WM8900
[   24.317240] initcall wm8900_modinit+0x0/0x3b returned 0 after 0 usecs
[   24.317245] calling  wm8903_modinit+0x0/0x3b @ 1
[   24.317249] bus: 'i2c': add driver WM8903
[   24.317495] initcall wm8903_modinit+0x0/0x3b returned 0 after 0 usecs
[   24.317500] calling  wm8971_modinit+0x0/0x39 @ 1
[   24.317503] No device for DAI WM8971
[   24.317508] initcall wm8971_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.317512] calling  wm8940_modinit+0x0/0x59 @ 1
[   24.317517] bus: 'i2c': add driver WM8940 I2C Codec
[   24.317733] initcall wm8940_modinit+0x0/0x59 returned 0 after 0 usecs
[   24.317738] calling  wm8960_modinit+0x0/0x59 @ 1
[   24.317742] bus: 'i2c': add driver WM8960 I2C Codec
[   24.318009] initcall wm8960_modinit+0x0/0x59 returned 0 after 0 usecs
[   24.318013] calling  wm8988_modinit+0x0/0x79 @ 1
[   24.318018] bus: 'i2c': add driver WM8988
[   24.318231] bus: 'spi': add driver wm8988
[   24.318499] initcall wm8988_modinit+0x0/0x79 returned 0 after 0 usecs
[   24.318504] calling  wm8990_modinit+0x0/0x39 @ 1
[   24.318506] No device for DAI WM8990 ADC/DAC Primary
[   24.318512] initcall wm8990_modinit+0x0/0x39 returned 0 after 0 usecs
[   24.318516] calling  wm9081_modinit+0x0/0x59 @ 1
[   24.318520] bus: 'i2c': add driver wm9081
[   24.318734] initcall wm9081_modinit+0x0/0x59 returned 0 after 0 usecs
[   24.318739] calling  alsa_sound_last_init+0x0/0x93 @ 1
[   24.318742] ALSA device list:
[   24.318744]   #0: NVidia CK804 with ALC850 at irq 3
[   24.318749] initcall alsa_sound_last_init+0x0/0x93 returned 0 after 0 usecs
[   24.318754] calling  flow_cache_init+0x0/0x1c9 @ 1
[   24.319248] initcall flow_cache_init+0x0/0x1c9 returned 0 after 0 usecs
[   24.319252] calling  llc_init+0x0/0x47 @ 1
[   24.319258] initcall llc_init+0x0/0x47 returned 0 after 0 usecs
[   24.319262] calling  snap_init+0x0/0x61 @ 1
[   24.319332] initcall snap_init+0x0/0x61 returned 0 after 0 usecs
[   24.319336] calling  sysctl_ipv4_init+0x0/0x74 @ 1
[   24.321697] initcall sysctl_ipv4_init+0x0/0x74 returned 0 after 9765 usecs
[   24.321702] calling  ipip_init+0x0/0x95 @ 1
[   24.321704] IPv4 over IPv4 tunneling driver
[   24.321802] device: 'tunl0': device_add
[   24.327530] initcall ipip_init+0x0/0x95 returned 0 after 0 usecs
[   24.327535] calling  ipgre_init+0x0/0xd7 @ 1
[   24.327537] GRE over IPv4 tunneling driver
[   24.327572] device: 'gre0': device_add
[   24.328830] initcall ipgre_init+0x0/0xd7 returned 0 after 0 usecs
[   24.328834] calling  ah4_init+0x0/0x8f @ 1
[   24.328839] initcall ah4_init+0x0/0x8f returned 0 after 0 usecs
[   24.328842] calling  ipcomp4_init+0x0/0x8f @ 1
[   24.328846] initcall ipcomp4_init+0x0/0x8f returned 0 after 0 usecs
[   24.328850] calling  ipip_init+0x0/0xc5 @ 1
[   24.328855] initcall ipip_init+0x0/0xc5 returned 0 after 0 usecs
[   24.328859] calling  tunnel4_init+0x0/0x8f @ 1
[   24.328863] initcall tunnel4_init+0x0/0x8f returned 0 after 0 usecs
[   24.328866] calling  xfrm4_mode_tunnel_init+0x0/0x3e @ 1
[   24.328870] initcall xfrm4_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs
[   24.328874] calling  tcp_westwood_register+0x0/0x39 @ 1
[   24.328878] TCP westwood registered
[   24.328881] initcall tcp_westwood_register+0x0/0x39 returned 0 after 0 usecs
[   24.328884] calling  hstcp_register+0x0/0x39 @ 1
[   24.328887] TCP highspeed registered
[   24.328890] initcall hstcp_register+0x0/0x39 returned 0 after 0 usecs
[   24.328894] calling  hybla_register+0x0/0x39 @ 1
[   24.328896] TCP hybla registered
[   24.328899] initcall hybla_register+0x0/0x39 returned 0 after 0 usecs
[   24.328902] calling  htcp_register+0x0/0x39 @ 1
[   24.328905] TCP htcp registered
[   24.328908] initcall htcp_register+0x0/0x39 returned 0 after 0 usecs
[   24.328911] calling  tcp_vegas_register+0x0/0x3b @ 1
[   24.328914] TCP vegas registered
[   24.328917] initcall tcp_vegas_register+0x0/0x3b returned 0 after 0 usecs
[   24.328921] calling  tcp_veno_register+0x0/0x3b @ 1
[   24.328923] TCP veno registered
[   24.328926] initcall tcp_veno_register+0x0/0x3b returned 0 after 0 usecs
[   24.328930] calling  tcp_scalable_register+0x0/0x39 @ 1
[   24.328932] TCP scalable registered
[   24.328936] initcall tcp_scalable_register+0x0/0x39 returned 0 after 0 usecs
[   24.328939] calling  tcp_yeah_register+0x0/0x3b @ 1
[   24.328942] TCP yeah registered
[   24.328945] initcall tcp_yeah_register+0x0/0x3b returned 0 after 0 usecs
[   24.328948] calling  inet6_init+0x0/0x2ec @ 1
[   24.331725] NET: Registered protocol family 10
[   24.335890] lo: Disabled Privacy Extensions
[   24.344751] tunl0: Disabled Privacy Extensions
[   24.348036] initcall inet6_init+0x0/0x2ec returned 0 after 19531 usecs
[   24.348041] calling  ah6_init+0x0/0x8f @ 1
[   24.348047] initcall ah6_init+0x0/0x8f returned 0 after 0 usecs
[   24.348051] calling  xfrm6_mode_tunnel_init+0x0/0x3e @ 1
[   24.348056] initcall xfrm6_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs
[   24.348059] calling  xfrm6_ro_init+0x0/0x3e @ 1
[   24.348063] initcall xfrm6_ro_init+0x0/0x3e returned 0 after 0 usecs
[   24.348067] calling  xfrm6_beet_init+0x0/0x3e @ 1
[   24.348071] initcall xfrm6_beet_init+0x0/0x3e returned 0 after 0 usecs
[   24.348075] calling  mip6_init+0x0/0xe1 @ 1
[   24.348077] Mobile IPv6
[   24.348081] initcall mip6_init+0x0/0xe1 returned 0 after 0 usecs
[   24.348085] calling  sit_init+0x0/0x95 @ 1
[   24.348087] IPv6 over IPv4 tunneling driver
[   24.348136] device: 'sit0': device_add
[   24.350627] sit0: Disabled Privacy Extensions
[   24.352082] initcall sit_init+0x0/0x95 returned 0 after 9765 usecs
[   24.352087] calling  packet_init+0x0/0x6d @ 1
[   24.352092] NET: Registered protocol family 17
[   24.352176] initcall packet_init+0x0/0x6d returned 0 after 0 usecs
[   24.352180] calling  ipsec_pfkey_init+0x0/0xac @ 1
[   24.352184] NET: Registered protocol family 15
[   24.352215] initcall ipsec_pfkey_init+0x0/0xac returned 0 after 0 usecs
[   24.352219] calling  br_init+0x0/0xd3 @ 1
[   24.352818] initcall br_init+0x0/0xd3 returned 0 after 0 usecs
[   24.352822] calling  dsa_init_module+0x0/0x3b @ 1
[   24.352827] initcall dsa_init_module+0x0/0x3b returned 0 after 0 usecs
[   24.352831] calling  edsa_init_module+0x0/0x3b @ 1
[   24.352835] initcall edsa_init_module+0x0/0x3b returned 0 after 0 usecs
[   24.352839] calling  mv88e6123_61_65_init+0x0/0x3b @ 1
[   24.352855] initcall mv88e6123_61_65_init+0x0/0x3b returned 0 after 0 usecs
[   24.352859] calling  mv88e6131_init+0x0/0x3b @ 1
[   24.352863] initcall mv88e6131_init+0x0/0x3b returned 0 after 0 usecs
[   24.352867] calling  dsa_init_module+0x0/0x39 @ 1
[   24.352876] bus: 'platform': add driver dsa
[   24.353117] initcall dsa_init_module+0x0/0x39 returned 0 after 0 usecs
[   24.353122] calling  atalk_init+0x0/0xb3 @ 1
[   24.353126] NET: Registered protocol family 5
[   24.390282] initcall atalk_init+0x0/0xb3 returned 0 after 39062 usecs
[   24.390287] calling  x25_init+0x0/0x85 @ 1
[   24.390291] NET: Registered protocol family 9
[   24.390295] X.25 for Linux Version 0.2
[   24.390526] initcall x25_init+0x0/0x85 returned 0 after 0 usecs
[   24.390531] calling  nr_proto_init+0x0/0x273 @ 1
[   24.390555] device: 'nr0': device_add
[   24.392441] device: 'nr1': device_add
[   24.394139] device: 'nr2': device_add
[   24.395896] device: 'nr3': device_add
[   24.397650] NET: Registered protocol family 6
[   24.398156] initcall nr_proto_init+0x0/0x273 returned 0 after 0 usecs
[   24.398160] calling  ax25_init+0x0/0xd3 @ 1
[   24.398164] NET: Registered protocol family 3
[   24.398243] initcall ax25_init+0x0/0xd3 returned 0 after 0 usecs
[   24.398247] calling  can_init+0x0/0x141 @ 1
[   24.398249] can: controller area network core (rev 20090105 abi 8)
[   24.398897] NET: Registered protocol family 29
[   24.398908] initcall can_init+0x0/0x141 returned 0 after 0 usecs
[   24.398913] calling  irnet_init+0x0/0x42 @ 1
[   24.398977] device: 'irnet': device_add
[   24.399238] initcall irnet_init+0x0/0x42 returned 0 after 0 usecs
[   24.399242] calling  l2cap_init+0x0/0x10a @ 1
[   24.399271] Bluetooth: L2CAP ver 2.13
[   24.399273] Bluetooth: L2CAP socket layer initialized
[   24.399277] initcall l2cap_init+0x0/0x10a returned 0 after 0 usecs
[   24.399282] calling  hidp_init+0x0/0x81 @ 1
[   24.399285] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   24.399291] bus: 'hid': add driver generic-bluetooth
[   24.399550] initcall hidp_init+0x0/0x81 returned 0 after 0 usecs
[   24.399554] calling  decnet_init+0x0/0xaf @ 1
[   24.399557] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[   24.401727] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes
[   24.401798] NET: Registered protocol family 12
[   24.402221] initcall decnet_init+0x0/0xaf returned 0 after 9765 usecs
[   24.402226] calling  econet_proto_init+0x0/0x1fb @ 1
[   24.402230] NET: Registered protocol family 19
[   24.402371] initcall econet_proto_init+0x0/0x1fb returned 0 after 0 usecs
[   24.402376] calling  phonet_init+0x0/0x9e @ 1
[   24.402393] NET: Registered protocol family 35
[   24.403082] initcall phonet_init+0x0/0x9e returned 0 after 0 usecs
[   24.403087] calling  pep_register+0x0/0x3e @ 1
[   24.403519] initcall pep_register+0x0/0x3e returned 0 after 0 usecs
[   24.403523] calling  vlan_proto_init+0x0/0xeb @ 1
[   24.403527] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[   24.403530] All bugs added by David S. Miller <[email protected]>
[   24.403596] initcall vlan_proto_init+0x0/0xeb returned 0 after 0 usecs
[   24.403601] calling  sctp_init+0x0/0x82d @ 1
[   24.406583] SCTP: Hash tables configured (established 18724 bind 18724)
[   24.408512] sctp_init_sock(sk: ffff88003cb08000)
[   24.408611] initcall sctp_init+0x0/0x82d returned 0 after 0 usecs
[   24.408616] calling  lib80211_init+0x0/0x45 @ 1
[   24.408618] lib80211: common routines for IEEE802.11 drivers
[   24.408634] lib80211_crypt: registered algorithm 'NULL'
[   24.408638] initcall lib80211_init+0x0/0x45 returned 0 after 0 usecs
[   24.408642] calling  lib80211_crypto_wep_init+0x0/0x39 @ 1
[   24.408646] lib80211_crypt: registered algorithm 'WEP'
[   24.408650] initcall lib80211_crypto_wep_init+0x0/0x39 returned 0 after 0 usecs
[   24.408654] calling  lib80211_crypto_ccmp_init+0x0/0x39 @ 1
[   24.408657] lib80211_crypt: registered algorithm 'CCMP'
[   24.408661] initcall lib80211_crypto_ccmp_init+0x0/0x39 returned 0 after 0 usecs
[   24.408665] calling  lib80211_crypto_tkip_init+0x0/0x39 @ 1
[   24.408668] lib80211_crypt: registered algorithm 'TKIP'
[   24.408672] initcall lib80211_crypto_tkip_init+0x0/0x39 returned 0 after 0 usecs
[   24.408676] calling  tipc_init+0x0/0xdf @ 1
[   24.408692] TIPC: Activated (version 1.6.4 compiled Aug  2 2009 22:49:36)
[   24.411036] NET: Registered protocol family 30
[   24.411040] TIPC: Started in single node mode
[   24.411049] initcall tipc_init+0x0/0xdf returned 0 after 9765 usecs
[   24.411054] calling  dcbnl_init+0x0/0x59 @ 1
[   24.411059] initcall dcbnl_init+0x0/0x59 returned 0 after 0 usecs
[   24.411063] calling  wimax_subsys_init+0x0/0x25a @ 1
[   24.430153] initcall wimax_subsys_init+0x0/0x25a returned 0 after 19531 usecs
[   24.430158] calling  severities_debugfs_init+0x0/0x83 @ 1
[   24.430184] initcall severities_debugfs_init+0x0/0x83 returned 0 after 0 usecs
[   24.430188] calling  cpufreq_p4_init+0x0/0x82 @ 1
[   24.430192] initcall cpufreq_p4_init+0x0/0x82 returned -19 after 0 usecs
[   24.430196] calling  update_mp_table+0x0/0x689 @ 1
[   24.430200] initcall update_mp_table+0x0/0x689 returned 0 after 0 usecs
[   24.430204] calling  lapic_insert_resource+0x0/0x67 @ 1
[   24.430211] initcall lapic_insert_resource+0x0/0x67 returned 0 after 0 usecs
[   24.430215] calling  io_apic_bug_finalize+0x0/0x42 @ 1
[   24.430219] initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs
[   24.430223] calling  check_early_ioremap_leak+0x0/0x8e @ 1
[   24.430228] initcall check_early_ioremap_leak+0x0/0x8e returned 0 after 0 usecs
[   24.430232] calling  sched_init_debug+0x0/0x4b @ 1
[   24.430243] initcall sched_init_debug+0x0/0x4b returned 0 after 0 usecs
[   24.430247] calling  init_oops_id+0x0/0x5d @ 1
[   24.430251] initcall init_oops_id+0x0/0x5d returned 0 after 0 usecs
[   24.430255] calling  disable_boot_consoles+0x0/0xf3 @ 1
[   24.430259] initcall disable_boot_consoles+0x0/0xf3 returned 0 after 0 usecs
[   24.430263] calling  pm_qos_power_init+0x0/0xf0 @ 1
[   24.430277] device: 'cpu_dma_latency': device_add
[   24.430572] device: 'network_latency': device_add
[   24.430796] device: 'network_throughput': device_add
[   24.431028] initcall pm_qos_power_init+0x0/0xf0 returned 0 after 0 usecs
[   24.431033] calling  clear_boot_tracer+0x0/0x52 @ 1
[   24.431037] initcall clear_boot_tracer+0x0/0x52 returned 0 after 0 usecs
[   24.431042] calling  max_swapfiles_check+0x0/0x2d @ 1
[   24.431047] initcall max_swapfiles_check+0x0/0x2d returned 0 after 0 usecs
[   24.431052] calling  random32_reseed+0x0/0xce @ 1
[   24.431070] initcall random32_reseed+0x0/0xce returned 0 after 0 usecs
[   24.431075] calling  pci_resource_alignment_sysfs_init+0x0/0x40 @ 1
[   24.431085] initcall pci_resource_alignment_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[   24.431089] calling  pci_sysfs_init+0x0/0x77 @ 1
[   24.431401] initcall pci_sysfs_init+0x0/0x77 returned 0 after 0 usecs
[   24.431405] calling  seqgen_init+0x0/0x36 @ 1
[   24.431425] initcall seqgen_init+0x0/0x36 returned 0 after 0 usecs
[   24.431429] calling  hd_init+0x0/0x321 @ 1
[   24.431478] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[   24.431629] initcall hd_init+0x0/0x321 returned -1 after 0 usecs
[   24.431633] initcall hd_init+0x0/0x321 returned with error code -1 
[   24.431639] calling  scsi_complete_async_scans+0x0/0x13b @ 1
[   24.431643] initcall scsi_complete_async_scans+0x0/0x13b returned 0 after 0 usecs
[   24.431647] calling  edd_init+0x0/0x386 @ 1
[   24.431650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   24.431652] EDD information not available.
[   24.431656] initcall edd_init+0x0/0x386 returned -19 after 0 usecs
[   24.431659] calling  memmap_init+0x0/0xce @ 1
[   24.431778] initcall memmap_init+0x0/0xce returned 0 after 0 usecs
[   24.431781] calling  dmatest_init+0x0/0x16c @ 1
[   24.431802] initcall dmatest_init+0x0/0x16c returned 0 after 0 usecs
[   24.431806] calling  tcp_congestion_default+0x0/0x39 @ 1
[   24.431811] initcall tcp_congestion_default+0x0/0x39 returned 0 after 0 usecs
[   24.431815] calling  ip_auto_config+0x0/0xf1d @ 1
[   24.431842] initcall ip_auto_config+0x0/0xf1d returned 0 after 0 usecs
[   24.431846] calling  initialize_hashrnd+0x0/0x40 @ 1
[   24.431854] initcall initialize_hashrnd+0x0/0x40 returned 0 after 0 usecs
[   24.431894] async_waiting @ 1
[   24.431897] async_continuing @ 1 after 0 usec
[   29.297460] EXT3-fs: INFO: recovery required on readonly filesystem.
[   29.300255] EXT3-fs: write access will be enabled during recovery.
[   29.345899] kjournald starting.  Commit interval 5 seconds
[   29.350055] EXT3-fs: recovery complete.
[   29.354793] EXT3-fs: mounted filesystem with writeback data mode.
[   29.360101] VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
[   29.366790] async_waiting @ 1
[   29.370004] async_continuing @ 1 after 0 usec
[   29.374355] debug: unmapping init memory ffffffff828ac000..ffffffff82985000
[   29.380094] Write protecting the kernel read-only data: 22020k
[   29.390362] Testing CPA: undo ffffffff81009000-ffffffff8258a000
[   29.397211] Testing CPA: again
[   29.397780] bus: 'serio': really_probe: probing driver atkbd with device serio0
[   29.432248] device: 'input0': device_add
[   29.447136] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
[   29.464851] input: AT Translated Set 2 keyboard as /class/input/input0
[   29.464851] device: 'event0': device_add
[   29.474693] evbug.c: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   29.480032] driver: 'serio0': driver_bound: bound to device 'atkbd'
[   29.486339] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[   29.487052] device: 'serio1': device_add
[   29.490012] bus: 'serio': add device serio1
[   29.504888] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[   29.504888] bus: 'serio': really_probe: probing driver atkbd with device serio1
[   29.525961] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse
[   29.530000] bus: 'serio': really_probe: probing driver psmouse with device serio1

Mount failed for selinuxfs on /selinux: No such device
INIT: version 2.86 booting
Welcome to Fedora
Press 'I' to enter interactive startup.

[   30.915335] device: 'input1': device_add
[   30.930122] input: ImPS/2 Generic Wheel Mouse as /class/input/input1
[   30.930122] device: 'mouse0': device_add
[   30.940546] device: 'event1': device_add
[   30.945070] evbug.c: Connected device: input1 (ImPS/2 Generic Wheel Mouse at isa0060/serio1/input0)
[   30.945070] driver: 'serio1': driver_bound: bound to device 'psmouse'
[   30.950012] bus: 'serio': really_probe: bound device serio1 to driver psmouse

Setting clock (localtime): Mon Aug 3 02:49:22 CEST 2009 [ OK ]
Starting udev: /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory /sbin/start_udev: line 187: /proc/sys/kernel/hotplug: No such file or directory

[   34.989808] CPA self-test:
[   35.002100]  4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[   35.028029]  4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[   35.055923]  4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[   35.059899] ok.
[   36.010887] eth1: link down
[   36.010887] device: 'bpq0': device_add
[   36.021765] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   36.075293] device: 'bpq1': device_add
[   37.270073] IPv4 FIB: Using LC-trie version 0.408

[ OK ]
Loading default keymap (us): [ OK ]
Setting hostname mercury: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda6 /1: Superblock last mount time is in the future. FIXED. /1: Superblock last write time is in the future. FIXED. /1: clean, 375369/7325696 files, 3524827/7325632 blocks [/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda5 /home: recovering journal
/home: Superblock last mount time is in the future. FIXED. /home: clean, 134936/6111232 files, 2541855/12209392 blocks [ OK ]
Remounting root filesystem in read-write mode: [ 43.092507] EXT3 FS on sda6, internal journal
[ OK ]
Mounting local filesystems: [ 43.208424] kjournald starting. Commit interval 5 seconds

[   43.211002] EXT3 FS on sda5, internal journal
[   43.211002] EXT3-fs: mounted filesystem with writeback data mode.
[  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  [   44.106716] Adding 3911816k swap on /dev/sda2.  Priority:-1 extents:1 across:3911816k 
[  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Starting system message bus: [   45.537838] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
#5 lore raw
Quoted 4 lines · Ingo Molnar

i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?

It does, thank you! This problem really is happening during boot.

Quoted 2 lines

Let me know if you still would like me to run your diagnostic patch too.

Now that you mention it, you should probably let me test it a bit first.

Thanx, Paul

#6 lore raw
Quoted 6 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar

i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?

Quoted 6 lines

It does, thank you! This problem really is happening during boot.

Quoted 2 lines

Let me know if you still would like me to run your diagnostic patch too.

Now that you mention it, you should probably let me test it a bit first.

And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).

Gautham, have you been able to reproduce on your machines? Still cannot here.

Thanx, Paul

------------------------------------------------------------------------

Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)

Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:

	WARN_ON_ONCE(!rcu_cpu_notified());

---

 include/linux/cpu.h      |    3 +++
 include/linux/rcupdate.h |    1 +
 kernel/cpu.c             |    5 +++++
 kernel/notifier.c        |   23 +++++++++++++++++++++++
 kernel/rcupdate.c        |    9 ++++++++-
 kernel/rcutree.c         |    1 +
 6 files changed, 41 insertions(+), 1 deletion(-)
include/linux/cpu.h +3 -0
index 4d668e0..d9b3c18 100644
@@ -51,6 +51,9 @@ struct notifier_block;
 #ifdef CONFIG_HOTPLUG_CPU
 extern int register_cpu_notifier(struct notifier_block *nb);
 extern void unregister_cpu_notifier(struct notifier_block *nb);
+extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
+extern int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *));
 #else
 
 #ifndef MODULE
include/linux/rcupdate.h +1 -0
index 3c89d6a..f790f3c 100644
@@ -65,6 +65,7 @@ extern void rcu_init(void);
 extern void rcu_scheduler_starting(void);
 extern int rcu_needs_cpu(int cpu);
 extern int rcu_scheduler_active;
+extern int rcu_cpu_notified(void);
 
 #if defined(CONFIG_TREE_RCU)
 #include <linux/rcutree.h>
kernel/cpu.c +5 -0
index 8ce1004..5aa736a 100644
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)
 	return ret;
 }
 
+int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return raw_notifier_chain_is_registered(&cpu_chain, fn);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 EXPORT_SYMBOL(register_cpu_notifier);
kernel/notifier.c +23 -0
index 61d5aa5..d72c0b8 100644
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,
 	return -ENOENT;
 }
 
+static int notifier_chain_is_registered(struct notifier_block *nl,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	rcu_read_lock();
+	/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */
+	while (nl != NULL) {
+		/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */
+		if (rcu_dereference(nl)->notifier_call == fn) {
+			rcu_read_unlock();
+			return 1;
+		}
+		nl = (rcu_dereference(nl)->next);
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
+int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return notifier_chain_is_registered(nh->head, fn);
+}
+
 /**
  * notifier_call_chain - Informs the registered notifiers about an event.
  *	@nl:		Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
index 9f0584e..57a4626 100644
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)
 extern int rcu_cpu_notify(struct notifier_block *self,
 			  unsigned long action, void *hcpu);
 
-static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
+int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
 	rcu_cpu_notify(self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
+int rcu_cpu_notified(void)
+{
+	return cpu_notified(rcu_barrier_cpu_hotplug);
+}
+
 void __init rcu_init(void)
 {
 	int i;
 
 	__rcu_init();
+	WARN_ON_ONCE(!rcu_cpu_notified()); /* this one expected to trigger. */
 	hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
index b9b1928..a0bfc93 100644
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	unsigned long flags;
 
 	WARN_ON_ONCE(rdp->beenonline == 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * If an RCU GP has gone long enough, go check for dyntick
#7 lore raw
Quoted 12 lines · Paul E. McKenney
Quoted 11 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar

i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?

It does, thank you! This problem really is happening during boot.

Quoted 2 lines

Let me know if you still would like me to run your diagnostic patch too.

Quoted 7 lines
Quoted 1 line

Now that you mention it, you should probably let me test it a bit first.

And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).

Gautham, have you been able to reproduce on your machines? Still cannot here.

I tried on a couple of machines yesterday, but I still couldn't reproduce it with Ingo's config.

Quoted 150 lines

Thanx, Paul

------------------------------------------------------------------------

Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)

Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:

	WARN_ON_ONCE(!rcu_cpu_notified());

---

 include/linux/cpu.h      |    3 +++
 include/linux/rcupdate.h |    1 +
 kernel/cpu.c             |    5 +++++
 kernel/notifier.c        |   23 +++++++++++++++++++++++
 kernel/rcupdate.c        |    9 ++++++++-
 kernel/rcutree.c         |    1 +
 6 files changed, 41 insertions(+), 1 deletion(-)
include/linux/cpu.h +3 -0
index 4d668e0..d9b3c18 100644
@@ -51,6 +51,9 @@ struct notifier_block;
 #ifdef CONFIG_HOTPLUG_CPU
 extern int register_cpu_notifier(struct notifier_block *nb);
 extern void unregister_cpu_notifier(struct notifier_block *nb);
+extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
+extern int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *));
 #else
 
 #ifndef MODULE
include/linux/rcupdate.h +1 -0
index 3c89d6a..f790f3c 100644
@@ -65,6 +65,7 @@ extern void rcu_init(void);
 extern void rcu_scheduler_starting(void);
 extern int rcu_needs_cpu(int cpu);
 extern int rcu_scheduler_active;
+extern int rcu_cpu_notified(void);
 
 #if defined(CONFIG_TREE_RCU)
 #include <linux/rcutree.h>
kernel/cpu.c +5 -0
index 8ce1004..5aa736a 100644
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)
 	return ret;
 }
 
+int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return raw_notifier_chain_is_registered(&cpu_chain, fn);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 EXPORT_SYMBOL(register_cpu_notifier);
kernel/notifier.c +23 -0
index 61d5aa5..d72c0b8 100644
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,
 	return -ENOENT;
 }
 
+static int notifier_chain_is_registered(struct notifier_block *nl,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	rcu_read_lock();
+	/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */
+	while (nl != NULL) {
+		/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */
+		if (rcu_dereference(nl)->notifier_call == fn) {
+			rcu_read_unlock();
+			return 1;
+		}
+		nl = (rcu_dereference(nl)->next);
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
+int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return notifier_chain_is_registered(nh->head, fn);
+}
+
 /**
  * notifier_call_chain - Informs the registered notifiers about an event.
  *	@nl:		Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
index 9f0584e..57a4626 100644
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)
 extern int rcu_cpu_notify(struct notifier_block *self,
 			  unsigned long action, void *hcpu);
 
-static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
+int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
 	rcu_cpu_notify(self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
+int rcu_cpu_notified(void)
+{
+	return cpu_notified(rcu_barrier_cpu_hotplug);
+}
+
 void __init rcu_init(void)
 {
 	int i;
 
 	__rcu_init();
+	WARN_ON_ONCE(!rcu_cpu_notified()); /* this one expected to trigger. */
 	hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
index b9b1928..a0bfc93 100644
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	unsigned long flags;
 
 	WARN_ON_ONCE(rdp->beenonline == 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * If an RCU GP has gone long enough, go check for dyntick
Signature · 2 lines
Thanks and Regards
gautham
#8 lore raw
Quoted 15 lines · Gautham R Shenoy
Quoted 14 lines · Paul E. McKenney
Quoted 12 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar

i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?

It does, thank you! This problem really is happening during boot.

Quoted 2 lines

Let me know if you still would like me to run your diagnostic patch too.

Now that you mention it, you should probably let me test it a bit first.

Quoted 8 lines
Quoted 5 lines

And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).

Gautham, have you been able to reproduce on your machines? Still cannot here.

I tried on a couple of machines yesterday, but I still couldn't reproduce it with Ingo's config.

Paul, should i try your latest diagnostic patch in -tip testing, to see whether it triggers any new warning?

Ingo

#9 lore raw
Quoted 21 lines · Ingo Molnar
Quoted 18 lines · Gautham R Shenoy
Quoted 17 lines · Paul E. McKenney
Quoted 6 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar

i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?

Quoted 6 lines

It does, thank you! This problem really is happening during boot.

Quoted 2 lines

Let me know if you still would like me to run your diagnostic patch too.

Now that you mention it, you should probably let me test it a bit first.

And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Gautham, have you been able to reproduce on your machines? Still cannot here.

I tried on a couple of machines yesterday, but I still couldn't reproduce it with Ingo's config.

Paul, should i try your latest diagnostic patch in -tip testing, to see whether it triggers any new warning?

Could you please?

Thanx, Paul

#10 lore raw

[tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

In reply to Paul E. McKenney
Commit-ID:  0d84abdae6740ee5290a7a523ee35916f65e16ec
Gitweb:     http://git.kernel.org/tip/0d84abdae6740ee5290a7a523ee35916f65e16ec
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sat, 8 Aug 2009 16:51:08 +0200

rcu: Add second diagnostic check for a possible CPU-hotplug race

Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)

Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:

	WARN_ON_ONCE(!rcu_cpu_notified());

LKML-Reference: <[email protected]>

---
 include/linux/cpu.h      |    3 +++
 include/linux/rcupdate.h |    1 +
 kernel/cpu.c             |    5 +++++
 kernel/notifier.c        |   23 +++++++++++++++++++++++
 kernel/rcupdate.c        |    9 ++++++++-
 kernel/rcutree.c         |    1 +
 6 files changed, 41 insertions(+), 1 deletions(-)
include/linux/cpu.h +3 -0
index 4d668e0..d9b3c18 100644
@@ -51,6 +51,9 @@ struct notifier_block;
 #ifdef CONFIG_HOTPLUG_CPU
 extern int register_cpu_notifier(struct notifier_block *nb);
 extern void unregister_cpu_notifier(struct notifier_block *nb);
+extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
+extern int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *));
 #else
 
 #ifndef MODULE
include/linux/rcupdate.h +1 -0
index 3c89d6a..f790f3c 100644
@@ -65,6 +65,7 @@ extern void rcu_init(void);
 extern void rcu_scheduler_starting(void);
 extern int rcu_needs_cpu(int cpu);
 extern int rcu_scheduler_active;
+extern int rcu_cpu_notified(void);
 
 #if defined(CONFIG_TREE_RCU)
 #include <linux/rcutree.h>
kernel/cpu.c +5 -0
index 8ce1004..5aa736a 100644
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)
 	return ret;
 }
 
+int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return raw_notifier_chain_is_registered(&cpu_chain, fn);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 EXPORT_SYMBOL(register_cpu_notifier);
kernel/notifier.c +23 -0
index 61d5aa5..d72c0b8 100644
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,
 	return -ENOENT;
 }
 
+static int notifier_chain_is_registered(struct notifier_block *nl,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	rcu_read_lock();
+	/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */
+	while (nl != NULL) {
+		/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */
+		if (rcu_dereference(nl)->notifier_call == fn) {
+			rcu_read_unlock();
+			return 1;
+		}
+		nl = (rcu_dereference(nl)->next);
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
+int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return notifier_chain_is_registered(nh->head, fn);
+}
+
 /**
  * notifier_call_chain - Informs the registered notifiers about an event.
  *	@nl:		Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
index 9f0584e..57a4626 100644
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)
 extern int rcu_cpu_notify(struct notifier_block *self,
 			  unsigned long action, void *hcpu);
 
-static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
+int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
 	rcu_cpu_notify(self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
+int rcu_cpu_notified(void)
+{
+	return cpu_notified(rcu_barrier_cpu_hotplug);
+}
+
 void __init rcu_init(void)
 {
 	int i;
 
 	__rcu_init();
+	WARN_ON_ONCE(!rcu_cpu_notified()); /* this one expected to trigger. */
 	hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
index b9b1928..a0bfc93 100644
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	unsigned long flags;
 
 	WARN_ON_ONCE(rdp->beenonline == 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * If an RCU GP has gone long enough, go check for dyntick
#11 lore raw

Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

Quoted 8 lines · tip-bot for Paul E. McKenney
Commit-ID:  0d84abdae6740ee5290a7a523ee35916f65e16ec
Gitweb:     http://git.kernel.org/tip/0d84abdae6740ee5290a7a523ee35916f65e16ec
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sat, 8 Aug 2009 16:51:08 +0200

rcu: Add second diagnostic check for a possible CPU-hotplug race

hm, got this build failure in -tip testing:

kernel/rcupdate.c: In function ‘rcu_cpu_notified’:
kernel/rcupdate.c:251: error: implicit declaration of function ‘cpu_notified’

with the config below.

Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sat Aug 8 16:54:05 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_KTIME_SCALAR=y CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
# CONFIG_BROKEN_BOOT_DISALLOWED is not set
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_TREE_RCU_TRACE=y
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_ELAN=y
CONFIG_X86_RDC321X=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_CPU_DEBUG=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
# CONFIG_ACPI is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_ALLOW_INTS=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
# CONFIG_I82365 is not set
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
CONFIG_MKISS=y
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_DMASCC=y
CONFIG_SCC=y
# CONFIG_SCC_DELAY is not set
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_YAM=y
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=y
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIBTUART=y
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
# CONFIG_MAC80211 is not set
CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_DELL_LAPTOP is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not set
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_FD_MCS is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_IBMMCA=y
# CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not set
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR_D700 is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_NCR_Q720=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_SYM53C416=y
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_T128=y
# CONFIG_SCSI_U14_34F is not set
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_LEGACY=y
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_NS87415=y
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_QDI is not set
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_PDC2027X=y
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_WINBOND_VLB=y
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks. #

#
# See the help texts for more information.
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_CONFIG is not set
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_NET_SB1000=y
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
CONFIG_EL2=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=y
CONFIG_ELMC=y
# CONFIG_ELMC_II is not set CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set CONFIG_ULTRA=y
# CONFIG_ULTRA32 is not set CONFIG_SMC9194=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=y
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
# CONFIG_DNET is not set CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set CONFIG_WINBOND_840=y
# CONFIG_DM9102 is not set CONFIG_ULI526X=y
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
CONFIG_HP100=y
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
CONFIG_HPLAN=y
# CONFIG_LP486E is not set
CONFIG_ETH16I=y
# CONFIG_NE2000 is not set
CONFIG_ZNET=y
CONFIG_SEEQ8005=y
CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=y
CONFIG_AC3200=y
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
# CONFIG_CS89x0 is not set
CONFIG_E100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
CONFIG_ES3210=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SMSC9420=y
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=y
CONFIG_KS8842=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set CONFIG_SC92031=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_QLA3XXX=y
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_JME=y
# CONFIG_NETDEV_10000 is not set CONFIG_MLX4_CORE=y
CONFIG_TR=y
# CONFIG_IBMTR is not set
# CONFIG_IBMOL is not set
CONFIG_IBMLS=y
CONFIG_3C359=y
CONFIG_TMS380TR=y
CONFIG_TMSPCI=y
CONFIG_SKISA=y
CONFIG_PROTEON=y
CONFIG_ABYSS=y
CONFIG_MADGEMC=y
# CONFIG_SMCTR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
CONFIG_ARLAN=y
CONFIG_WAVELAN=y
CONFIG_PCMCIA_WAVELAN=y
CONFIG_PCMCIA_NETWAVE=y
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_CS=y
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=y
# CONFIG_ATMEL is not set
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
# CONFIG_IPW2200_PROMISCUOUS is not set
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=y
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
# CONFIG_PCI_HERMES is not set
# CONFIG_PCMCIA_HERMES is not set
CONFIG_PCMCIA_SPECTRUM=y

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_NET_PCMCIA is not set
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_N2=y
# CONFIG_C101 is not set
CONFIG_FARSYNC=y
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
# CONFIG_SDLA is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
# CONFIG_SBNI is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_IEEE802154_DRIVERS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
# CONFIG_ISDN is not set
CONFIG_PHONE=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_INPORT is not set
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HTCPEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
# CONFIG_TOUCHSCREEN_WM9712 is not set
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_GPIO=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_ELEKTOR=y
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_SCx200_ACB=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_PCF8574=y
CONFIG_PCF8575=y
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set

#
# Memory mapped GPIO expanders:
#

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set

#
# SPI GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_WM97XX=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_MAX17040=y
CONFIG_CHARGER_PCF50633=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_TWL4030_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
CONFIG_IB700_WDT=y
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_RDC321X_WDT=y
# CONFIG_60XX_WDT is not set
CONFIG_SBC8360_WDT=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
CONFIG_MIXCOMWD=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_AB3100_CORE=y
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=y
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not set
CONFIG_FB_LITTLE_ENDIAN=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_UVESA is not set
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_MATROX_MULTIHEAD is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
# CONFIG_FB_MB862XX_PCI_GDC is not set
CONFIG_FB_BROADSHEET=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_MBP_NVIDIA=y
CONFIG_BACKLIGHT_SAHARA=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_OPL4_LIB_SEQ=y
CONFIG_SND_SBAWE_SEQ=y
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL4_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=y
CONFIG_SND_SB_COMMON=y
CONFIG_SND_SB8_DSP=y
CONFIG_SND_SB16_DSP=y
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=y
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
CONFIG_SND_AZT2320=y
CONFIG_SND_CMI8330=y
CONFIG_SND_CS4231=y
CONFIG_SND_CS4236=y
CONFIG_SND_DT019X=y
CONFIG_SND_ES968=y
CONFIG_SND_ES1688=y
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
CONFIG_SND_GUSCLASSIC=y
# CONFIG_SND_GUSEXTREME is not set
CONFIG_SND_GUSMAX=y
CONFIG_SND_INTERWAVE=y
CONFIG_SND_INTERWAVE_STB=y
CONFIG_SND_OPL3SA2=y
CONFIG_SND_OPTI92X_AD1848=y
CONFIG_SND_OPTI92X_CS4231=y
CONFIG_SND_OPTI93X=y
CONFIG_SND_MIRO=y
CONFIG_SND_SB8=y
# CONFIG_SND_SB16 is not set
CONFIG_SND_SBAWE=y
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SGALAXY=y
CONFIG_SND_SSCAPE=y
CONFIG_SND_WAVEFRONT=y
CONFIG_SND_MSND_PINNACLE=y
CONFIG_SND_MSND_CLASSIC=y
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=y
CONFIG_SND_ALS4000=y
CONFIG_SND_ALI5451=y
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_AZT3328=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=y
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
CONFIG_SND_ECHO3G=y
# CONFIG_SND_INDIGO is not set
CONFIG_SND_INDIGOIO=y
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
CONFIG_SND_INDIGODJX=y
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=y
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_FM801=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_HIFIER=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_LX6464ES=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MIXART=y
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
# CONFIG_SND_SIS7019 is not set
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=y
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=y
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_I2C_AND_SPI=y
CONFIG_SND_SOC_ALL_CODECS=y
CONFIG_SND_SOC_AD73311=y
CONFIG_SND_SOC_AK4535=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_L3=y
CONFIG_SND_SOC_PCM3008=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TWL4030=y
CONFIG_SND_SOC_UDA134X=y
CONFIG_SND_SOC_UDA1380=y
CONFIG_SND_SOC_WM8400=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8900=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8940=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8971=y
CONFIG_SND_SOC_WM8988=y
CONFIG_SND_SOC_WM8990=y
CONFIG_SND_SOC_WM9081=y
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not set
CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_TWL4030 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set

#
# TI VLYNQ
#
CONFIG_X86_PLATFORM_DEVICES=y

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y
# CONFIG_ALLOW_WARNINGS is not set CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not set CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_RCU_TORTURE_TEST=y CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_BACKTRACE_SELF_TEST=y CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y CONFIG_FAIL_MAKE_REQUEST=y CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_TRACER_MAX_TRACE=y CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y
CONFIG_BOOT_TRACER=y CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_POWER_TRACER=y
CONFIG_KSYM_TRACER=y CONFIG_PROFILE_KSYM_TRACER=y CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_FTRACE is not set CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y CONFIG_PROVIDE_OHCI1394_DMA_INIT=y CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_LGUEST=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#12 lore raw

Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

Quoted 10 lines · Ingo Molnar
Quoted 7 lines · tip-bot for Paul E. McKenney
Commit-ID:  0d84abdae6740ee5290a7a523ee35916f65e16ec
Gitweb:     http://git.kernel.org/tip/0d84abdae6740ee5290a7a523ee35916f65e16ec
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sat, 8 Aug 2009 16:51:08 +0200
Quoted 8 lines
Quoted 1 line

rcu: Add second diagnostic check for a possible CPU-hotplug race

hm, got this build failure in -tip testing:

kernel/rcupdate.c: In function ‘rcu_cpu_notified’:
kernel/rcupdate.c:251: error: implicit declaration of function ‘cpu_notified’

with the config below.

Gah... I didn't take !CONFIG_HOTPLUG_CPU into account. Fix below.

Thanx, Paul

------------------------------------------------------------------------

Fix build breakage in diagnostic patch.

Move cpu_notified() declaration out from under #ifdef.

---

 cpu.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/cpu.h +1 -1
index d9b3c18..1b1c30c 100644
@@ -45,13 +45,13 @@ extern int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls);
 extern void unregister_cpu(struct cpu *cpu);
 #endif
 struct notifier_block;
+extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
 
 #ifdef CONFIG_SMP
 /* Need to know about CPUs going up/down? */
 #ifdef CONFIG_HOTPLUG_CPU
 extern int register_cpu_notifier(struct notifier_block *nb);
 extern void unregister_cpu_notifier(struct notifier_block *nb);
-extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
 extern int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
 		int (*fn)(struct notifier_block *, unsigned long, void *));
 #else
#13 lore raw

[tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

In reply to Paul E. McKenney
Commit-ID:  86f044729ee3e4d8885c17371ce5a76f6f321dc7
Gitweb:     http://git.kernel.org/tip/86f044729ee3e4d8885c17371ce5a76f6f321dc7
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sun, 9 Aug 2009 12:42:48 +0200

rcu: Add second diagnostic check for a possible CPU-hotplug race

Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)

Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:

	WARN_ON_ONCE(!rcu_cpu_notified());

-v2: fix build error

LKML-Reference: <[email protected]>

---
 include/linux/cpu.h      |    3 +++
 include/linux/rcupdate.h |    1 +
 kernel/cpu.c             |    5 +++++
 kernel/notifier.c        |   23 +++++++++++++++++++++++
 kernel/rcupdate.c        |    9 ++++++++-
 kernel/rcutree.c         |    1 +
 6 files changed, 41 insertions(+), 1 deletions(-)
include/linux/cpu.h +3 -0
index 4d668e0..1b1c30c 100644
@@ -45,12 +45,15 @@ extern int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls);
 extern void unregister_cpu(struct cpu *cpu);
 #endif
 struct notifier_block;
+extern int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *));
 
 #ifdef CONFIG_SMP
 /* Need to know about CPUs going up/down? */
 #ifdef CONFIG_HOTPLUG_CPU
 extern int register_cpu_notifier(struct notifier_block *nb);
 extern void unregister_cpu_notifier(struct notifier_block *nb);
+extern int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *));
 #else
 
 #ifndef MODULE
include/linux/rcupdate.h +1 -0
index 3c89d6a..f790f3c 100644
@@ -65,6 +65,7 @@ extern void rcu_init(void);
 extern void rcu_scheduler_starting(void);
 extern int rcu_needs_cpu(int cpu);
 extern int rcu_scheduler_active;
+extern int rcu_cpu_notified(void);
 
 #if defined(CONFIG_TREE_RCU)
 #include <linux/rcutree.h>
kernel/cpu.c +5 -0
index 8ce1004..5aa736a 100644
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)
 	return ret;
 }
 
+int cpu_notified(int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return raw_notifier_chain_is_registered(&cpu_chain, fn);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 EXPORT_SYMBOL(register_cpu_notifier);
kernel/notifier.c +23 -0
index 61d5aa5..d72c0b8 100644
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,
 	return -ENOENT;
 }
 
+static int notifier_chain_is_registered(struct notifier_block *nl,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	rcu_read_lock();
+	/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */
+	while (nl != NULL) {
+		/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */
+		if (rcu_dereference(nl)->notifier_call == fn) {
+			rcu_read_unlock();
+			return 1;
+		}
+		nl = (rcu_dereference(nl)->next);
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
+int raw_notifier_chain_is_registered(struct raw_notifier_head *nh,
+		int (*fn)(struct notifier_block *, unsigned long, void *))
+{
+	return notifier_chain_is_registered(nh->head, fn);
+}
+
 /**
  * notifier_call_chain - Informs the registered notifiers about an event.
  *	@nl:		Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
index 9f0584e..57a4626 100644
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)
 extern int rcu_cpu_notify(struct notifier_block *self,
 			  unsigned long action, void *hcpu);
 
-static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
+int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
 	rcu_cpu_notify(self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
+int rcu_cpu_notified(void)
+{
+	return cpu_notified(rcu_barrier_cpu_hotplug);
+}
+
 void __init rcu_init(void)
 {
 	int i;
 
 	__rcu_init();
+	WARN_ON_ONCE(!rcu_cpu_notified()); /* this one expected to trigger. */
 	hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
index b9b1928..a0bfc93 100644
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	unsigned long flags;
 
 	WARN_ON_ONCE(rdp->beenonline == 0);
+	WARN_ON_ONCE(!rcu_cpu_notified());
 
 	/*
 	 * If an RCU GP has gone long enough, go check for dyntick
#14 lore raw

Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

Quoted 8 lines · tip-bot for Paul E. McKenney
Commit-ID:  86f044729ee3e4d8885c17371ce5a76f6f321dc7
Gitweb:     http://git.kernel.org/tip/86f044729ee3e4d8885c17371ce5a76f6f321dc7
Author:     Paul E. McKenney <[email protected]>
AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sun, 9 Aug 2009 12:42:48 +0200

rcu: Add second diagnostic check for a possible CPU-hotplug race

has a build problem too:

kernel/built-in.o: In function `rcu_cpu_notified':
(.text+0x1d787): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x1174): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x11a8): undefined reference to `cpu_notified'

Maybe we should simplify all those Kconfig rules? It's a maze.

Ingo

#15 lore raw

Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

Quoted 4 lines · Ingo Molnar
Quoted 1 line

rcu: Add second diagnostic check for a possible CPU-hotplug race

has a build problem too:

Quoted 8 lines

kernel/built-in.o: In function `rcu_cpu_notified':
(.text+0x1d787): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x1174): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x11a8): undefined reference to `cpu_notified'

Maybe we should simplify all those Kconfig rules? It's a maze.

a testbox still managed to sneak in, build another config, boot it and trigger the warning below - is this what you were after? Bootlog below, config attached.

Ingo

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-rc5-tip (mingo@europe) (gcc version 4.2.2) #7134 SMP Sun Aug 9 13:04:19 CEST 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
[    0.000000]  BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f6e0000 (usable)
[    0.000000]  modified: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
[    0.000000]  modified: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
[    0.000000]  modified: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] ACPI: RSDP 000f68a0 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 7f6e631f 00074 (v01 LENOVO TP-79    00001020  LTP 00000000)
[    0.000000] ACPI: FACP 7f6e6400 000F4 (v03 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527
[    0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558
[    0.000000] ACPI: DSDT 7f6e65e7 0C765 (v01 LENOVO TP-79    00001020 MSFT 0100000E)
[    0.000000] ACPI: FACS 7f6f4000 00040
[    0.000000] ACPI: SSDT 7f6e65b4 00033 (v01 LENOVO TP-79    00001020 MSFT 0100000E)
[    0.000000] ACPI: ECDT 7f6f2d4c 00052 (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: TCPA 7f6f2d9e 00032 (v02 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: APIC 7f6f2dd0 00068 (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: MCFG 7f6f2e38 0003E (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: HPET 7f6f2e76 00038 (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: BOOT 7f6f2fd8 00028 (v01 LENOVO TP-79    00001020  LTP 00000001)
[    0.000000] ACPI: SSDT 7f6e58da 00507 (v01 LENOVO TP-79    00001020 INTL 20050513)
[    0.000000] ACPI: SSDT 7f6e5702 001D8 (v01 LENOVO TP-79    00001020 INTL 20050513)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00018150c8]    TEXT DATA BSS ==> [0001000000 - 00018150c8]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [0001816000 - 000181d138]              BRK ==> [0001816000 - 000181d138]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Scan SMP from c0000000 for 1024 bytes.
[    0.000000] Scan SMP from c009fc00 for 1024 bytes.
[    0.000000] Scan SMP from c00f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [c00f68e0] f68e0
[    0.000000]   mpc: 9f5a1-9f6b5
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f6e0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f6e0
[    0.000000] On node 0 totalpages: 521851
[    0.000000] free_area_init_node: node 0, pgdat c16f3c20, node_mem_map c181e000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 292324 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c2818000, static data 33436 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517773
[    0.000000] Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 3 [email protected]/eth0,[email protected]/00:30:48:c6:86:26
[    0.000000] kernel profiling enabled (shift: 0)
[    0.000000] debug: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f6e0)
[    0.000000] Memory: 2061020k/2087808k available (4496k kernel code, 25604k reserved, 2686k data, 376k init, 1178504k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc170b000 - 0xc1769000   ( 376 kB)
[    0.000000]       .data : 0xc14643fd - 0xc1703f68   (2686 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14643fd   (4496 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at kernel/rcupdate.c:259 rcu_init+0x2b/0xa0()
[    0.000000] Hardware name: 1951A26
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #7134
[    0.000000] Call Trace:
[    0.000000]  [<c102ec3b>] warn_slowpath_common+0x60/0x77
[    0.000000]  [<c102ec5f>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c171c929>] rcu_init+0x2b/0xa0
[    0.000000]  [<c170b6f3>] start_kernel+0x184/0x2ca
[    0.000000]  [<c170b06a>] __init_begin+0x6a/0x6f
[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1828.477 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] hpet clockevent registered
[    0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3656.95 BogoMIPS (lpj=1828477)
[    0.000999] Security Framework initialized
[    0.000999] SELinux:  Initializing.
[    0.000999] SELinux:  Starting in permissive mode
[    0.000999] Mount-cache hash table entries: 512
[    0.000999] Initializing cgroup subsys ns
[    0.000999] Initializing cgroup subsys cpuacct
[    0.001013] Initializing cgroup subsys freezer
[    0.001119] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001249] CPU: L2 cache: 2048K
[    0.001336] CPU: Physical Processor ID: 0
[    0.001422] CPU: Processor Core ID: 0
[    0.001510] mce: CPU supports 6 MCE banks
[    0.001605] CPU0: Thermal monitoring enabled (TM2)
[    0.001694] using mwait in idle threads.
[    0.001786] Performance Counters: no PMU driver, software counters only.
[    0.002005] Checking 'hlt' instruction... OK.
[    0.006584] ACPI: Core revision 20090521
[    0.027076] enabled ExtINT on CPU#0
[    0.028075] ENABLING IO-APIC IRQs
[    0.028161] init IO_APIC IRQs
[    0.028246]  1-0 (apicid-pin) not connected
[    0.028377] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.028508] IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.028640] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[    0.028772] IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.028904] IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
[    0.029001] IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.029132] IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.029264] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.029397] IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
[    0.029528] IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.029659] IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
[    0.029791] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.029923] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.030000] IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.030131] IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.030261]  1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected
[    0.030875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.041069] CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.041248] Using local APIC timer interrupts.
[    0.041250] calibrating APIC timer ...
[    0.041993] ... lapic delta = 1039050
[    0.041993] ... PM-Timer delta = 357950
[    0.041993] ... PM-Timer result ok
[    0.041993] ..... delta 1039050
[    0.041993] ..... mult: 44633642
[    0.041993] ..... calibration result: 166248
[    0.041993] ..... CPU clock speed is 1828.0727 MHz.
[    0.041993] ..... host bus clock speed is 166.0248 MHz.
[    0.041993] calling  migration_init+0x0/0x47 @ 1
[    0.041993] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
[    0.041993] calling  spawn_ksoftirqd+0x0/0x47 @ 1
[    0.041993] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs
[    0.041993] calling  init_call_single_data+0x0/0x6d @ 1
[    0.041993] initcall init_call_single_data+0x0/0x6d returned 0 after 0 usecs
[    0.041993] calling  relay_init+0x0/0x11 @ 1
[    0.041993] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
[    0.041993] calling  tracer_alloc_buffers+0x0/0x12d @ 1
[    0.041993] initcall tracer_alloc_buffers+0x0/0x12d returned 0 after 0 usecs
[    0.041998] calling  init_trace_printk+0x0/0xf @ 1
[    0.042087] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[    0.042253] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] masked ExtINT on CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 3657.34 BogoMIPS (lpj=1828674)
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] mce: CPU supports 6 MCE banks
[    0.000999] CPU1: Thermal monitoring enabled (TM2)
[    0.113434] CPU1: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.114126] checking TSC synchronization [CPU#0 -> CPU#1]:
[    0.114982] Measured 579865 cycles TSC warp between CPUs, turning off TSC clock.
[    0.114982] Marking TSC unstable due to check_tsc_sync_source failed
[    0.115008] Brought up 2 CPUs
[    0.115095] Total of 2 processors activated (7314.30 BogoMIPS).
[    0.116092] khelper used greatest stack depth: 6944 bytes left
[    0.116167] calling  init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[    0.116167] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[    0.116275] calling  net_ns_init+0x0/0xc0 @ 1
[    0.116384] initcall net_ns_init+0x0/0xc0 returned 0 after 0 usecs
[    0.116384] calling  e820_mark_nvs_memory+0x0/0x37 @ 1
[    0.116989] initcall e820_mark_nvs_memory+0x0/0x37 returned 0 after 0 usecs
[    0.117084] calling  cpufreq_tsc+0x0/0x25 @ 1
[    0.117172] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[    0.117265] calling  pci_reboot_init+0x0/0x11 @ 1
[    0.117355] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.117447] calling  reboot_init+0x0/0x11 @ 1
[    0.117540] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.117633] calling  init_lapic_sysfs+0x0/0x28 @ 1
[    0.117730] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
[    0.117989] calling  init_smp_flush+0x0/0x20 @ 1
[    0.118078] initcall init_smp_flush+0x0/0x20 returned 0 after 0 usecs
[    0.118172] calling  alloc_frozen_cpus+0x0/0x9 @ 1
[    0.118262] initcall alloc_frozen_cpus+0x0/0x9 returned 0 after 0 usecs
[    0.118355] calling  sysctl_init+0x0/0x29 @ 1
[    0.118584] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs
[    0.118676] calling  ksysfs_init+0x0/0x96 @ 1
[    0.118773] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs
[    0.118865] calling  async_init+0x0/0x3c @ 1
[    0.118954] initcall async_init+0x0/0x3c returned 0 after 0 usecs
[    0.118986] calling  init_jiffies_clocksource+0x0/0xf @ 1
[    0.119078] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[    0.119206] calling  pm_init+0x0/0x2d @ 1
[    0.119299] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[    0.119389] calling  pm_disk_init+0x0/0x14 @ 1
[    0.119480] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[    0.119573] calling  swsusp_header_init+0x0/0x26 @ 1
[    0.119663] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs
[    0.119756] calling  init_hw_breakpoint+0x0/0xf @ 1
[    0.119848] initcall init_hw_breakpoint+0x0/0xf returned 0 after 0 usecs
[    0.119986] calling  filelock_init+0x0/0x27 @ 1
[    0.120075] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[    0.120167] calling  init_misc_binfmt+0x0/0x35 @ 1
[    0.120259] initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs
[    0.120351] calling  init_script_binfmt+0x0/0x11 @ 1
[    0.120442] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.120534] calling  init_elf_binfmt+0x0/0x11 @ 1
[    0.120623] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.120716] calling  debugfs_init+0x0/0x4a @ 1
[    0.120808] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.120901] calling  random32_init+0x0/0xa4 @ 1
[    0.120985] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
[    0.121079] calling  early_resume_init+0x0/0x183 @ 1
[    0.121985] Time: 11:05:10  Date: 08/09/09
[    0.122072] initcall early_resume_init+0x0/0x183 returned 0 after 976 usecs
[    0.122164] calling  cpufreq_core_init+0x0/0x59 @ 1
[    0.122253] initcall cpufreq_core_init+0x0/0x59 returned 0 after 0 usecs
[    0.122345] calling  cpuidle_init+0x0/0x32 @ 1
[    0.122437] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[    0.122529] calling  sock_init+0x0/0x51 @ 1
[    0.122662] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[    0.122754] calling  net_inuse_init+0x0/0x1f @ 1
[    0.122845] initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs
[    0.122937] calling  netpoll_init+0x0/0x11 @ 1
[    0.122985] initcall netpoll_init+0x0/0x11 returned 0 after 0 usecs
[    0.123077] calling  netlink_proto_init+0x0/0x102 @ 1
[    0.123170] NET: Registered protocol family 16
[    0.123269] initcall netlink_proto_init+0x0/0x102 returned 0 after 0 usecs
[    0.123362] calling  bdi_class_init+0x0/0x35 @ 1
[    0.123464] initcall bdi_class_init+0x0/0x35 returned 0 after 0 usecs
[    0.123464] calling  kobject_uevent_init+0x0/0x4e @ 1
[    0.123464] initcall kobject_uevent_init+0x0/0x4e returned 0 after 0 usecs
[    0.123464] calling  pcibus_class_init+0x0/0x14 @ 1
[    0.123464] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
[    0.123992] calling  pci_driver_init+0x0/0xf @ 1
[    0.124091] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[    0.124091] calling  backlight_class_init+0x0/0x4d @ 1
[    0.124182] initcall backlight_class_init+0x0/0x4d returned 0 after 0 usecs
[    0.124182] calling  video_output_class_init+0x0/0x14 @ 1
[    0.124182] initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
[    0.124182] calling  tty_class_init+0x0/0x28 @ 1
[    0.124212] initcall tty_class_init+0x0/0x28 returned 0 after 0 usecs
[    0.124987] calling  vtconsole_class_init+0x0/0xa1 @ 1
[    0.125087] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs
[    0.125087] calling  i2c_init+0x0/0x54 @ 1
[    0.125177] initcall i2c_init+0x0/0x54 returned 0 after 0 usecs
[    0.125177] calling  amd_postcore_init+0x0/0x66 @ 1
[    0.125177] initcall amd_postcore_init+0x0/0x66 returned 0 after 0 usecs
[    0.125260] calling  arch_kdebugfs_init+0x0/0x261 @ 1
[    0.125361] initcall arch_kdebugfs_init+0x0/0x261 returned 0 after 0 usecs
[    0.125986] calling  init_pit_clocksource+0x0/0x94 @ 1
[    0.126077] initcall init_pit_clocksource+0x0/0x94 returned 0 after 0 usecs
[    0.126170] calling  mtrr_if_init+0x0/0x44 @ 1
[    0.126261] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[    0.126353] calling  ffh_cstate_init+0x0/0x27 @ 1
[    0.126442] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs
[    0.126535] calling  kdump_buf_page_init+0x0/0x54 @ 1
[    0.126626] initcall kdump_buf_page_init+0x0/0x54 returned 0 after 0 usecs
[    0.126719] calling  acpi_pci_init+0x0/0x4c @ 1
[    0.126807] ACPI: bus type pci registered
[    0.126895] initcall acpi_pci_init+0x0/0x4c returned 0 after 0 usecs
[    0.126983] calling  dmi_id_init+0x0/0x28f @ 1
[    0.127083] initcall dmi_id_init+0x0/0x28f returned 0 after 0 usecs
[    0.127083] calling  pci_arch_init+0x0/0x53 @ 1
[    0.127190] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.127283] PCI: MCFG area at f0000000 reserved in E820
[    0.127372] PCI: Using MMCONFIG for extended config space
[    0.127461] PCI: Using configuration type 1 for base access
[    0.127560] initcall pci_arch_init+0x0/0x53 returned 0 after 0 usecs
[    0.127653] calling  topology_init+0x0/0x36 @ 1
[    0.128010] initcall topology_init+0x0/0x36 returned 0 after 976 usecs
[    0.128103] calling  mtrr_init_finialize+0x0/0x35 @ 1
[    0.128193] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[    0.128287] calling  param_sysfs_init+0x0/0x1a6 @ 1
[    0.138109] initcall param_sysfs_init+0x0/0x1a6 returned 0 after 9764 usecs
[    0.138109] calling  pm_sysrq_init+0x0/0x16 @ 1
[    0.138195] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[    0.138287] calling  audit_watch_init+0x0/0x27 @ 1
[    0.138376] initcall audit_watch_init+0x0/0x27 returned 0 after 0 usecs
[    0.138469] calling  default_bdi_init+0x0/0x2f @ 1
[    0.138584] initcall default_bdi_init+0x0/0x2f returned 0 after 0 usecs
[    0.138584] calling  init_bio+0x0/0xc0 @ 1
[    0.139024] bio: create slab <bio-0> at 0
[    0.139118] initcall init_bio+0x0/0xc0 returned 0 after 0 usecs
[    0.139210] calling  fsnotify_init+0x0/0xf @ 1
[    0.139300] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
[    0.139392] calling  fsnotify_notification_init+0x0/0x5b @ 1
[    0.139485] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs
[    0.139615] calling  cryptomgr_init+0x0/0xf @ 1
[    0.139704] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[    0.139795] calling  blk_settings_init+0x0/0x1d @ 1
[    0.139885] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[    0.140016] calling  blk_ioc_init+0x0/0x24 @ 1
[    0.140106] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[    0.140198] calling  blk_softirq_init+0x0/0x5b @ 1
[    0.140288] initcall blk_softirq_init+0x0/0x5b returned 0 after 0 usecs
[    0.140379] calling  genhd_device_init+0x0/0x50 @ 1
[    0.140516] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[    0.140516] calling  pci_slot_init+0x0/0x3b @ 1
[    0.140516] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[    0.140516] calling  fbmem_init+0x0/0x78 @ 1
[    0.140516] initcall fbmem_init+0x0/0x78 returned 0 after 0 usecs
[    0.141018] calling  acpi_init+0x0/0x25e @ 1
[    0.142435] ACPI: EC: EC description table is found, configuring boot EC
[    0.150150] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.156229] ACPI: Interpreter enabled
[    0.156318] ACPI: (supports S0 S3 S4 S5)
[    0.156596] ACPI: Using IOAPIC for interrupt routing
[    0.173122] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.173215] ACPI: EC: driver started in interrupt mode
[    0.173323] ACPI: Power Resource [PUBS] (on)
[    0.174221] initcall acpi_init+0x0/0x25e returned 0 after 32221 usecs
[    0.174314] calling  dock_init+0x0/0x7d @ 1
[    0.177366] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[    0.177460] initcall dock_init+0x0/0x7d returned 0 after 2929 usecs
[    0.177553] calling  acpi_pci_root_init+0x0/0x25 @ 1
[    0.177668] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.177785] pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff]
[    0.177979] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[    0.178072] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[    0.178166] pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff]
[    0.178296] pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff]
[    0.178500] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff]
[    0.178650] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.178743] pci 0000:00:1b.0: PME# disabled
[    0.178913] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.178978] pci 0000:00:1c.0: PME# disabled
[    0.179149] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.179243] pci 0000:00:1c.1: PME# disabled
[    0.179414] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.179508] pci 0000:00:1c.2: PME# disabled
[    0.179678] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.179771] pci 0000:00:1c.3: PME# disabled
[    0.179919] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.180039] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.180191] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.180342] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.180498] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff]
[    0.180649] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.180744] pci 0000:00:1d.7: PME# disabled
[    0.181077] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.181209] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.181303] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.181435] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.181567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.181748] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.181843] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.181939] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.181980] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.182075] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[    0.182227] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
[    0.182323] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
[    0.182419] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
[    0.182514] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
[    0.182610] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[    0.182705] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff]
[    0.182833] pci 0000:00:1f.2: PME# supported from D3hot
[    0.182977] pci 0000:00:1f.2: PME# disabled
[    0.183126] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[    0.183388] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff]
[    0.183563] pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f]
[    0.183819] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.183977] pci 0000:02:00.0: PME# disabled
[    0.184201] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.184295] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
[    0.184575] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
[    0.184946] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.185025] pci 0000:03:00.0: PME# disabled
[    0.185254] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
[    0.185348] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
[    0.185446] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
[    0.185596] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
[    0.185690] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
[    0.185789] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
[    0.186016] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff]
[    0.186109] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
[    0.186206] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
[    0.186352] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
[    0.186471] pci 0000:15:00.0: supports D1 D2
[    0.186558] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186653] pci 0000:15:00.0: PME# disabled
[    0.186808] pci 0000:00:1e.0: transparent bridge
[    0.186898] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff]
[    0.186980] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
[    0.187845] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
[    0.188012] pci_bus 0000:00: on NUMA node 0
[    0.188103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.188345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[    0.188515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.188683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.188857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.189037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.194071] initcall acpi_pci_root_init+0x0/0x25 returned 0 after 16599 usecs
[    0.194071] calling  acpi_pci_link_init+0x0/0x3f @ 1
[    0.194320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.195402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.196167] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.196895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.197608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.198349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.199103] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.199834] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.200436] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 5858 usecs
[    0.200436] calling  pnp_init+0x0/0xf @ 1
[    0.200436] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[    0.200436] calling  misc_init+0x0/0x92 @ 1
[    0.200436] initcall misc_init+0x0/0x92 returned 0 after 0 usecs
[    0.200979] calling  cn_init+0x0/0xcb @ 1
[    0.201078] initcall cn_init+0x0/0xcb returned 0 after 0 usecs
[    0.201170] calling  init_scsi+0x0/0x84 @ 1
[    0.201338] SCSI subsystem initialized
[    0.201338] initcall init_scsi+0x0/0x84 returned 0 after 0 usecs
[    0.201338] calling  ata_init+0x0/0x29d @ 1
[    0.201338] libata version 3.00 loaded.
[    0.201338] initcall ata_init+0x0/0x29d returned 0 after 0 usecs
[    0.201975] calling  phy_init+0x0/0x29 @ 1
[    0.202074] initcall phy_init+0x0/0x29 returned 0 after 0 usecs
[    0.202074] calling  init_pcmcia_cs+0x0/0x1e @ 1
[    0.202163] initcall init_pcmcia_cs+0x0/0x1e returned 0 after 0 usecs
[    0.202163] calling  usb_init+0x0/0x177 @ 1
[    0.202177] usbcore: registered new interface driver usbfs
[    0.202177] usbcore: registered new interface driver hub
[    0.203006] usbcore: registered new device driver usb
[    0.203063] initcall usb_init+0x0/0x177 returned 0 after 976 usecs
[    0.203155] calling  serio_init+0x0/0x82 @ 1
[    0.203252] initcall serio_init+0x0/0x82 returned 0 after 0 usecs
[    0.203252] calling  input_init+0x0/0xfb @ 1
[    0.203252] initcall input_init+0x0/0xfb returned 0 after 0 usecs
[    0.203252] calling  rtc_init+0x0/0x5e @ 1
[    0.203252] initcall rtc_init+0x0/0x5e returned 0 after 0 usecs
[    0.203973] calling  power_supply_class_init+0x0/0x2b @ 1
[    0.204074] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs
[    0.204101] calling  hwmon_init+0x0/0xe9 @ 1
[    0.204202] initcall hwmon_init+0x0/0xe9 returned 0 after 0 usecs
[    0.204202] calling  thermal_init+0x0/0x32 @ 1
[    0.204202] initcall thermal_init+0x0/0x32 returned 0 after 0 usecs
[    0.204202] calling  md_init+0x0/0xb5 @ 1
[    0.204202] initcall md_init+0x0/0xb5 returned 0 after 0 usecs
[    0.204252] calling  leds_init+0x0/0x32 @ 1
[    0.204983] initcall leds_init+0x0/0x32 returned 0 after 0 usecs
[    0.205065] calling  pci_subsys_init+0x0/0xdf @ 1
[    0.205153] PCI: Using ACPI for IRQ routing
[    0.205553] initcall pci_subsys_init+0x0/0xdf returned 0 after 0 usecs
[    0.205646] calling  proto_init+0x0/0xf @ 1
[    0.205736] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[    0.205827] calling  net_dev_init+0x0/0x142 @ 1
[    0.206028] initcall net_dev_init+0x0/0x142 returned 0 after 0 usecs
[    0.206075] calling  neigh_init+0x0/0x66 @ 1
[    0.206164] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[    0.206256] calling  fib_rules_init+0x0/0x99 @ 1
[    0.206346] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[    0.206439] calling  pktsched_init+0x0/0xa9 @ 1
[    0.206530] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs
[    0.206622] calling  tc_filter_init+0x0/0x43 @ 1
[    0.206712] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[    0.206804] calling  tc_action_init+0x0/0x43 @ 1
[    0.206972] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
[    0.207065] calling  genl_init+0x0/0xb0 @ 1
[    0.208976] initcall genl_init+0x0/0xb0 returned 0 after 1952 usecs
[    0.209068] calling  cipso_v4_init+0x0/0x52 @ 1
[    0.209159] initcall cipso_v4_init+0x0/0x52 returned 0 after 0 usecs
[    0.209250] calling  wireless_nlevent_init+0x0/0x2f @ 1
[    0.209341] initcall wireless_nlevent_init+0x0/0x2f returned 0 after 0 usecs
[    0.209436] calling  cfg80211_init+0x0/0x64 @ 1
[    0.219994] cfg80211: Using static regulatory domain info
[    0.220082] cfg80211: Regulatory domain: US
[    0.220169] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.220298] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    0.220391] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220485] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220577] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220669] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220762] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    0.220858] cfg80211: Calling CRDA for country: US
[    0.220985] initcall cfg80211_init+0x0/0x64 returned 0 after 11716 usecs
[    0.221068] calling  ieee80211_init+0x0/0xa @ 1
[    0.221158] initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs
[    0.221250] calling  netlbl_init+0x0/0x6d @ 1
[    0.221336] NetLabel: Initializing
[    0.221421] NetLabel:  domain hash size = 128
[    0.221508] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.221610] NetLabel:  unlabeled traffic allowed by default
[    0.221702] initcall netlbl_init+0x0/0x6d returned 0 after 0 usecs
[    0.221793] calling  rfkill_init+0x0/0x75 @ 1
[    0.222006] initcall rfkill_init+0x0/0x75 returned 0 after 976 usecs
[    0.222087] calling  sysctl_init+0x0/0x3b @ 1
[    0.222175] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[    0.222267] calling  pci_iommu_init+0x0/0xc @ 1
[    0.222356] initcall pci_iommu_init+0x0/0xc returned 0 after 0 usecs
[    0.222449] calling  print_all_ICs+0x0/0x441 @ 1
[    0.222538] 
[    0.222539] printing PIC contents
[    0.222707] ... PIC  IMR: ffff
[    0.222795] ... PIC  IRR: 0800
[    0.222888] ... PIC  ISR: 0000
[    0.222972] ... PIC ELCR: 0800
[    0.223058] printing local APIC contents on CPU#0/0:
[    0.223146] ... APIC ID:      00000000 (0)
[    0.223233] ... APIC VERSION: 00050014
[    0.223318] ... APIC TASKPRI: 00000000 (00)
[    0.223406] ... APIC PROCPRI: 00000000
[    0.223491] ... APIC LDR: 01000000
[    0.223576] ... APIC DFR: ffffffff
[    0.223661] ... APIC SPIV: 000001ff
[    0.223747] ... APIC ISR field:
[    0.223832] 0000000000000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC TMR field:
[    0.223965] 0000000002000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC IRR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000008000
[    0.223965] ... APIC ESR: 00000000
[    0.223965] ... APIC ICR: 000008fb
[    0.223965] ... APIC ICR2: 02000000
[    0.223965] ... APIC LVTT: 000200ef
[    0.223965] ... APIC LVTPC: 00010000
[    0.223965] ... APIC LVT0: 00010700
[    0.223965] ... APIC LVT1: 00000400
[    0.223965] ... APIC LVTERR: 000000fe
[    0.223965] ... APIC TMICT: 00002896
[    0.223965] ... APIC TMCCT: 000021a7
[    0.223965] ... APIC TDCR: 00000003
[    0.223965] 
[    0.223577] printing local APIC contents on CPU#1/1:
[    0.223668] ... APIC ID:      01000000 (1)
[    0.223754] ... APIC VERSION: 00050014
[    0.223840] ... APIC TASKPRI: 00000000 (00)
[    0.223928] ... APIC PROCPRI: 00000000
[    0.223965] ... APIC LDR: 02000000
[    0.223965] ... APIC DFR: ffffffff
[    0.223965] ... APIC SPIV: 000001ff
[    0.223965] ... APIC ISR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC TMR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC IRR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000008000
[    0.223965] ... APIC ESR: 00000000
[    0.223965] ... APIC ICR: 000008fd
[    0.223965] ... APIC ICR2: 01000000
[    0.223965] ... APIC LVTT: 000200ef
[    0.223965] ... APIC LVTPC: 00010000
[    0.223965] ... APIC LVT0: 00010700
[    0.223965] ... APIC LVT1: 00010400
[    0.223965] ... APIC LVTERR: 000000fe
[    0.223965] ... APIC TMICT: 00002896
[    0.223965] ... APIC TMCCT: 00000f04
[    0.223965] ... APIC TDCR: 00000003
[    0.223965] 
[    0.227664] number of MP IRQ sources: 15.
[    0.227752] number of IO-APIC #1 registers: 24.
[    0.227839] testing the IO APIC.......................
[    0.227933] 
[    0.227967] IO APIC #1......
[    0.228050] .... register #00: 02000000
[    0.228136] .......    : physical APIC id: 02
[    0.228223] .......    : Delivery Type: 0
[    0.228309] .......    : LTS          : 0
[    0.228396] .... register #01: 00170020
[    0.228482] .......     : max redirection entries: 0017
[    0.228570] .......     : PRQ implemented: 0
[    0.228656] .......     : IO APIC version: 0020
[    0.228743] .... IRQ redirection table:
[    0.228966]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
[    0.229059]  00 000 1    0    0   0   0    0    0    00
[    0.229195]  01 003 0    0    0   0   0    1    1    31
[    0.229970]  02 003 0    0    0   0   0    1    1    30
[    0.230105]  03 003 0    0    0   0   0    1    1    33
[    0.230241]  04 003 0    0    0   0   0    1    1    34
[    0.230377]  05 003 0    0    0   0   0    1    1    35
[    0.230514]  06 003 0    0    0   0   0    1    1    36
[    0.230650]  07 003 0    0    0   0   0    1    1    37
[    0.230787]  08 003 0    0    0   0   0    1    1    38
[    0.230967]  09 003 0    1    0   0   0    1    1    39
[    0.231103]  0a 003 0    0    0   0   0    1    1    3A
[    0.231239]  0b 003 0    0    0   0   0    1    1    3B
[    0.231375]  0c 003 0    0    0   0   0    1    1    3C
[    0.231511]  0d 003 0    0    0   0   0    1    1    3D
[    0.231646]  0e 003 0    0    0   0   0    1    1    3E
[    0.231782]  0f 003 0    0    0   0   0    1    1    3F
[    0.231918]  10 000 1    0    0   0   0    0    0    00
[    0.232055]  11 000 1    0    0   0   0    0    0    00
[    0.232192]  12 000 1    0    0   0   0    0    0    00
[    0.232329]  13 000 1    0    0   0   0    0    0    00
[    0.232465]  14 000 1    0    0   0   0    0    0    00
[    0.232602]  15 000 1    0    0   0   0    0    0    00
[    0.232737]  16 000 1    0    0   0   0    0    0    00
[    0.232873]  17 000 1    0    0   0   0    0    0    00
[    0.232966] IRQ to pin mappings:
[    0.233051] IRQ0 -> 0:2
[    0.233219] IRQ1 -> 0:1
[    0.233389] IRQ3 -> 0:3
[    0.233559] IRQ4 -> 0:4
[    0.233729] IRQ5 -> 0:5
[    0.233897] IRQ6 -> 0:6
[    0.234088] IRQ7 -> 0:7
[    0.234258] IRQ8 -> 0:8
[    0.234426] IRQ9 -> 0:9
[    0.234596] IRQ10 -> 0:10
[    0.234765] IRQ11 -> 0:11
[    0.234933] IRQ12 -> 0:12
[    0.235087] IRQ13 -> 0:13
[    0.235256] IRQ14 -> 0:14
[    0.235426] IRQ15 -> 0:15
[    0.235599] .................................... done.
[    0.235690] initcall print_all_ICs+0x0/0x441 returned 0 after 12693 usecs
[    0.235783] calling  hpet_late_init+0x0/0x183 @ 1
[    0.235877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236179] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.238971] initcall hpet_late_init+0x0/0x183 returned 0 after 3905 usecs
[    0.239062] calling  clocksource_done_booting+0x0/0x11 @ 1
[    0.239968] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs
[    0.240097] calling  rb_init_debugfs+0x0/0x27 @ 1
[    0.240191] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs
[    0.240283] calling  tracer_init_debugfs+0x0/0x26b @ 1
[    0.240459] initcall tracer_init_debugfs+0x0/0x26b returned 0 after 0 usecs
[    0.240553] calling  init_trace_printk_function_export+0x0/0x2a @ 1
[    0.240647] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs
[    0.240776] calling  event_trace_init+0x0/0x17e @ 1
[    0.240979] Switched to high resolution mode on CPU 0
[    0.241783] Switched to high resolution mode on CPU 1
[    0.242167] initcall event_trace_init+0x0/0x17e returned 0 after 2148 usecs
[    0.242265] calling  init_pipe_fs+0x0/0x41 @ 1
[    0.242366] initcall init_pipe_fs+0x0/0x41 returned 0 after 11 usecs
[    0.242459] calling  eventpoll_init+0x0/0xac @ 1
[    0.242554] initcall eventpoll_init+0x0/0xac returned 0 after 5 usecs
[    0.242647] calling  anon_inode_init+0x0/0xed @ 1
[    0.242744] initcall anon_inode_init+0x0/0xed returned 0 after 6 usecs
[    0.242836] calling  blk_scsi_ioctl_init+0x0/0x288 @ 1
[    0.242929] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 1 usecs
[    0.243031] calling  acpi_event_init+0x0/0x6f @ 1
[    0.246021] initcall acpi_event_init+0x0/0x6f returned 0 after 2830 usecs
[    0.246114] calling  pnpacpi_init+0x0/0x7b @ 1
[    0.246202] pnp: PnP ACPI init
[    0.246298] ACPI: bus type pnp registered
[    0.248505] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.248733] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.248956] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.249185] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.250518] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[    0.253081] pnp: PnP ACPI: found 11 devices
[    0.253168] ACPI: ACPI bus type pnp unregistered
[    0.253266] initcall pnpacpi_init+0x0/0x7b returned 0 after 6895 usecs
[    0.253359] calling  pnp_system_init+0x0/0xf @ 1
[    0.253456] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.253548] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[    0.253641] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[    0.253735] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[    0.253828] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[    0.253921] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[    0.254025] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[    0.254118] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[    0.254211] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[    0.254313] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[    0.254406] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[    0.254499] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.254592] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
[    0.254723] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.254859] system 00:02: ioport range 0x164e-0x164f has been reserved
[    0.254952] system 00:02: ioport range 0x1000-0x107f has been reserved
[    0.255050] system 00:02: ioport range 0x1180-0x11bf has been reserved
[    0.255143] system 00:02: ioport range 0x800-0x80f has been reserved
[    0.255235] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[    0.255334] system 00:02: ioport range 0x1600-0x165f could not be reserved
[    0.255428] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.255522] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.255616] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.255710] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.255804] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.255954] initcall pnp_system_init+0x0/0xf returned 0 after 2446 usecs
[    0.256056] calling  chr_dev_init+0x0/0x8d @ 1
[    0.256797] initcall chr_dev_init+0x0/0x8d returned 0 after 636 usecs
[    0.256891] calling  firmware_class_init+0x0/0x61 @ 1
[    0.257046] initcall firmware_class_init+0x0/0x61 returned 0 after 62 usecs
[    0.257140] calling  init_pcmcia_bus+0x0/0x62 @ 1
[    0.257308] initcall init_pcmcia_bus+0x0/0x62 returned 0 after 75 usecs
[    0.257402] calling  cpufreq_gov_performance_init+0x0/0xf @ 1
[    0.257497] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 1 usecs
[    0.257625] calling  cpufreq_gov_userspace_init+0x0/0xf @ 1
[    0.257719] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs
[    0.257849] calling  init_acpi_pm_clocksource+0x0/0x1b5 @ 1
[    0.292492] initcall init_acpi_pm_clocksource+0x0/0x1b5 returned 0 after 33741 usecs
[    0.292622] calling  pcibios_assign_resources+0x0/0x66 @ 1
[    0.292785] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.292876] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.292970] pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
[    0.293076] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.293169] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.293267] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
[    0.293360] pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
[    0.293453] pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
[    0.293588] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.293679] pci 0000:00:1c.2:   IO window: 0x5000-0x6fff
[    0.293773] pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
[    0.293866] pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
[    0.294009] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
[    0.294100] pci 0000:00:1c.3:   IO window: 0x7000-0x8fff
[    0.294194] pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
[    0.294293] pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
[    0.294431] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[    0.294524] pci 0000:15:00.0:   IO window: 0x009000-0x0090ff
[    0.294618] pci 0000:15:00.0:   IO window: 0x009400-0x0094ff
[    0.294712] pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
[    0.294807] pci 0000:15:00.0:   MEM window: 0x80000000-0x83ffffff
[    0.294902] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[    0.294994] pci 0000:00:1e.0:   IO window: 0x9000-0xcfff
[    0.295094] pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
[    0.295188] pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
[    0.295338]   alloc irq_desc for 20 on node -1
[    0.295425]   alloc kstat_irqs on node -1
[    0.295514] IOAPIC[0]: Set routing entry (1-20 -> 0x49 -> IRQ 20 Mode:1 Active:1)
[    0.295645] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.295741] pci 0000:00:1c.0: setting latency timer to 64
[    0.295836]   alloc irq_desc for 21 on node -1
[    0.295923]   alloc kstat_irqs on node -1
[    0.296019] IOAPIC[0]: Set routing entry (1-21 -> 0x51 -> IRQ 21 Mode:1 Active:1)
[    0.296149] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.296243] pci 0000:00:1c.1: setting latency timer to 64
[    0.296347]   alloc irq_desc for 22 on node -1
[    0.296435]   alloc kstat_irqs on node -1
[    0.296522] IOAPIC[0]: Set routing entry (1-22 -> 0x59 -> IRQ 22 Mode:1 Active:1)
[    0.296651] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.296747] pci 0000:00:1c.2: setting latency timer to 64
[    0.296843]   alloc irq_desc for 23 on node -1
[    0.297013]   alloc kstat_irqs on node -1
[    0.297803] IOAPIC[0]: Set routing entry (1-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
[    0.297933] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.298033] pci 0000:00:1c.3: setting latency timer to 64
[    0.298126] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[    0.298219] pci 0000:00:1e.0: setting latency timer to 64
[    0.298326]   alloc irq_desc for 16 on node -1
[    0.298413]   alloc kstat_irqs on node -1
[    0.298501] IOAPIC[0]: Set routing entry (1-16 -> 0x69 -> IRQ 16 Mode:1 Active:1)
[    0.298631] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.298729] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.298819] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.298910] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.299000] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff]
[    0.299099] pci_bus 0000:03: resource 0 io:  [0x3000-0x4fff]
[    0.299189] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
[    0.299287] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff]
[    0.299380] pci_bus 0000:04: resource 0 io:  [0x5000-0x6fff]
[    0.299471] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
[    0.299563] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff]
[    0.299655] pci_bus 0000:0c: resource 0 io:  [0x7000-0x8fff]
[    0.299745] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
[    0.299837] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff]
[    0.299929] pci_bus 0000:15: resource 0 io:  [0x9000-0xcfff]
[    0.300026] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
[    0.300117] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff]
[    0.300210] pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
[    0.300309] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
[    0.300400] pci_bus 0000:16: resource 0 io:  [0x9000-0x90ff]
[    0.300491] pci_bus 0000:16: resource 1 io:  [0x9400-0x94ff]
[    0.300581] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff]
[    0.300673] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff]
[    0.300767] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 7864 usecs
[    0.300897] calling  sysctl_core_init+0x0/0x2d @ 1
[    0.301023] initcall sysctl_core_init+0x0/0x2d returned 0 after 33 usecs
[    0.301115] calling  inet_init+0x0/0x1c3 @ 1
[    0.301213] NET: Registered protocol family 2
[    0.301404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.301831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.302659] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.303110] TCP: Hash tables configured (established 131072 bind 65536)
[    0.303202] TCP reno registered
[    0.303404] initcall inet_init+0x0/0x1c3 returned 0 after 2142 usecs
[    0.303499] calling  af_unix_init+0x0/0x47 @ 1
[    0.303589] NET: Registered protocol family 1
[    0.303688] initcall af_unix_init+0x0/0x47 returned 0 after 97 usecs
[    0.303781] calling  populate_rootfs+0x0/0x1ea @ 1
[    0.303938] initcall populate_rootfs+0x0/0x1ea returned 0 after 63 usecs
[    0.304045] calling  i8259A_init_sysfs+0x0/0x1d @ 1
[    0.304311] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 169 usecs
[    0.304404] calling  sbf_init+0x0/0xc0 @ 1
[    0.304495] Simple Boot Flag at 0x35 set to 0x1
[    0.304589] initcall sbf_init+0x0/0xc0 returned 0 after 93 usecs
[    0.304681] calling  i8237A_init_sysfs+0x0/0x1d @ 1
[    0.304886] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 111 usecs
[    0.304980] calling  add_rtc_cmos+0x0/0x7e @ 1
[    0.305095] initcall add_rtc_cmos+0x0/0x7e returned 0 after 5 usecs
[    0.305188] calling  cache_sysfs_init+0x0/0x4b @ 1
[    0.305753] initcall cache_sysfs_init+0x0/0x4b returned 0 after 457 usecs
[    0.305847] calling  mce_init_device+0x0/0xc1 @ 1
[    0.306201] initcall mce_init_device+0x0/0xc1 returned 0 after 257 usecs
[    0.306305] calling  threshold_init_device+0x0/0x3a @ 1
[    0.306398] initcall threshold_init_device+0x0/0x3a returned 0 after 1 usecs
[    0.306492] calling  thermal_throttle_init_device+0x0/0x77 @ 1
[    0.306590] initcall thermal_throttle_init_device+0x0/0x77 returned 0 after 5 usecs
[    0.306720] calling  msr_init+0x0/0xda @ 1
[    0.307020] initcall msr_init+0x0/0xda returned 0 after 189 usecs
[    0.307111] calling  cpuid_init+0x0/0xda @ 1
[    0.307389] initcall cpuid_init+0x0/0xda returned 0 after 181 usecs
[    0.307482] calling  ioapic_init_sysfs+0x0/0x84 @ 1
[    0.307679] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 104 usecs
[    0.307772] calling  add_pcspkr+0x0/0x24 @ 1
[    0.307929] initcall add_pcspkr+0x0/0x24 returned 0 after 65 usecs
[    0.308034] calling  microcode_init+0x0/0xf2 @ 1
[    0.308192] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
[    0.308297] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
[    0.308450] Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    0.308583] initcall microcode_init+0x0/0xf2 returned 0 after 447 usecs
[    0.308678] calling  start_periodic_check_for_corruption+0x0/0x32 @ 1
[    0.308770] Scanning for low memory corruption every 60 seconds
[    0.308864] initcall start_periodic_check_for_corruption+0x0/0x32 returned 0 after 91 usecs
[    0.308996] calling  aes_init+0x0/0xf @ 1
[    0.309202] initcall aes_init+0x0/0xf returned 0 after 90 usecs
[    0.309304] calling  proc_schedstat_init+0x0/0x1c @ 1
[    0.309401] initcall proc_schedstat_init+0x0/0x1c returned 0 after 6 usecs
[    0.309495] calling  proc_execdomains_init+0x0/0x1c @ 1
[    0.309588] initcall proc_execdomains_init+0x0/0x1c returned 0 after 2 usecs
[    0.309681] calling  ioresources_init+0x0/0x2d @ 1
[    0.309775] initcall ioresources_init+0x0/0x2d returned 0 after 3 usecs
[    0.309867] calling  uid_cache_init+0x0/0x5b @ 1
[    0.309963] initcall uid_cache_init+0x0/0x5b returned 0 after 5 usecs
[    0.310078] calling  init_posix_timers+0x0/0xb3 @ 1
[    0.310174] initcall init_posix_timers+0x0/0xb3 returned 0 after 5 usecs
[    0.310274] calling  init_posix_cpu_timers+0x0/0xba @ 1
[    0.310367] initcall init_posix_cpu_timers+0x0/0xba returned 0 after 1 usecs
[    0.310460] calling  nsproxy_cache_init+0x0/0x27 @ 1
[    0.310553] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 1 usecs
[    0.310647] calling  create_proc_profile+0x0/0x16f @ 1
[    0.310749] initcall create_proc_profile+0x0/0x16f returned 0 after 9 usecs
[    0.310843] calling  timekeeping_init_device+0x0/0x1d @ 1
[    0.311038] initcall timekeeping_init_device+0x0/0x1d returned 0 after 100 usecs
[    0.311170] calling  init_clocksource_sysfs+0x0/0x43 @ 1
[    0.311377] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 106 usecs
[    0.311508] calling  init_timer_list_procfs+0x0/0x27 @ 1
[    0.311602] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 2 usecs
[    0.311695] calling  init_tstats_procfs+0x0/0x27 @ 1
[    0.311789] initcall init_tstats_procfs+0x0/0x27 returned 0 after 2 usecs
[    0.311881] calling  futex_init+0x0/0x65 @ 1
[    0.311979] initcall futex_init+0x0/0x65 returned 0 after 8 usecs
[    0.312086] calling  proc_dma_init+0x0/0x1c @ 1
[    0.312179] initcall proc_dma_init+0x0/0x1c returned 0 after 2 usecs
[    0.312277] calling  proc_modules_init+0x0/0x1c @ 1
[    0.312370] initcall proc_modules_init+0x0/0x1c returned 0 after 2 usecs
[    0.312462] calling  kallsyms_init+0x0/0x1f @ 1
[    0.312553] initcall kallsyms_init+0x0/0x1f returned 0 after 2 usecs
[    0.312646] calling  snapshot_device_init+0x0/0xf @ 1
[    0.312801] initcall snapshot_device_init+0x0/0xf returned 0 after 61 usecs
[    0.312895] calling  crash_save_vmcoreinfo_init+0x0/0x348 @ 1
[    0.313023] initcall crash_save_vmcoreinfo_init+0x0/0x348 returned 0 after 34 usecs
[    0.313153] calling  crash_notes_memory_init+0x0/0x31 @ 1
[    0.313247] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 3 usecs
[    0.313384] calling  pid_namespaces_init+0x0/0x27 @ 1
[    0.313477] initcall pid_namespaces_init+0x0/0x27 returned 0 after 2 usecs
[    0.313570] calling  audit_init+0x0/0xd2 @ 1
[    0.313657] audit: initializing netlink socket (disabled)
[    0.313756] type=2000 audit(1249815910.313:1): initialized
[    0.313848] initcall audit_init+0x0/0xd2 returned 0 after 186 usecs
[    0.313941] calling  audit_tree_init+0x0/0x3b @ 1
[    0.314048] initcall audit_tree_init+0x0/0x3b returned 0 after 3 usecs
[    0.314140] calling  init_kprobes+0x0/0x11c @ 1
[    0.324102] initcall init_kprobes+0x0/0x11c returned 0 after 9640 usecs
[    0.324195] calling  utsname_sysctl_init+0x0/0x11 @ 1
[    0.324314] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 22 usecs
[    0.324409] calling  init_markers+0x0/0xf @ 1
[    0.324499] initcall init_markers+0x0/0xf returned 0 after 1 usecs
[    0.324591] calling  init_tracepoints+0x0/0xf @ 1
[    0.324683] initcall init_tracepoints+0x0/0xf returned 0 after 1 usecs
[    0.324774] calling  init_events+0x0/0x5a @ 1
[    0.324867] initcall init_events+0x0/0x5a returned 0 after 2 usecs
[    0.324958] calling  init_sched_switch_trace+0x0/0xf @ 1
[    0.325059] initcall init_sched_switch_trace+0x0/0xf returned 0 after 2 usecs
[    0.325152] calling  init_blk_tracer+0x0/0x4b @ 1
[    0.325243] initcall init_blk_tracer+0x0/0x4b returned 0 after 1 usecs
[    0.325343] calling  perf_counter_sysfs_init+0x0/0x14 @ 1
[    0.325439] initcall perf_counter_sysfs_init+0x0/0x14 returned 0 after 4 usecs
[    0.325569] calling  init_per_zone_wmark_min+0x0/0x59 @ 1
[    0.325746] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 83 usecs
[    0.325877] calling  pdflush_init+0x0/0x20 @ 1
[    0.326037] initcall pdflush_init+0x0/0x20 returned 0 after 68 usecs
[    0.326131] calling  kswapd_init+0x0/0x1d @ 1
[    0.326255] initcall kswapd_init+0x0/0x1d returned 0 after 33 usecs
[    0.326350] calling  init_tmpfs+0x0/0xb9 @ 1
[    0.326466] initcall init_tmpfs+0x0/0xb9 returned 0 after 26 usecs
[    0.326558] calling  setup_vmstat+0x0/0x9a @ 1
[    0.326658] initcall setup_vmstat+0x0/0x9a returned 0 after 9 usecs
[    0.326751] calling  mm_sysfs_init+0x0/0x22 @ 1
[    0.326844] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs
[    0.326936] calling  proc_vmalloc_init+0x0/0x1f @ 1
[    0.327037] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 2 usecs
[    0.327131] calling  init_emergency_pool+0x0/0x57 @ 1
[    0.327243] highmem bounce pool size: 64 pages
[    0.327340] initcall init_emergency_pool+0x0/0x57 returned 0 after 115 usecs
[    0.327433] calling  procswaps_init+0x0/0x1c @ 1
[    0.327527] initcall procswaps_init+0x0/0x1c returned 0 after 2 usecs
[    0.327619] calling  hugetlb_init+0x0/0x230 @ 1
[    0.327709] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.327811] initcall hugetlb_init+0x0/0x230 returned 0 after 99 usecs
[    0.328692] calling  slab_proc_init+0x0/0x1f @ 1
[    0.328784] initcall slab_proc_init+0x0/0x1f returned 0 after 2 usecs
[    0.328876] calling  slab_sysfs_init+0x0/0xb7 @ 1
[    0.333074] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 4008 usecs
[    0.333169] calling  fasync_init+0x0/0x24 @ 1
[    0.333268] initcall fasync_init+0x0/0x24 returned 0 after 6 usecs
[    0.333360] calling  proc_filesystems_init+0x0/0x1c @ 1
[    0.333455] initcall proc_filesystems_init+0x0/0x1c returned 0 after 3 usecs
[    0.333548] calling  dnotify_init+0x0/0x6f @ 1
[    0.333649] initcall dnotify_init+0x0/0x6f returned 0 after 10 usecs
[    0.333741] calling  inotify_setup+0x0/0x11 @ 1
[    0.333833] initcall inotify_setup+0x0/0x11 returned 0 after 1 usecs
[    0.333925] calling  inotify_user_setup+0x0/0x9e @ 1
[    0.334044] initcall inotify_user_setup+0x0/0x9e returned 0 after 20 usecs
[    0.334138] calling  aio_setup+0x0/0x60 @ 1
[    0.334295] initcall aio_setup+0x0/0x60 returned 0 after 65 usecs
[    0.334389] calling  proc_locks_init+0x0/0x1c @ 1
[    0.334483] initcall proc_locks_init+0x0/0x1c returned 0 after 2 usecs
[    0.334575] calling  init_mbcache+0x0/0x11 @ 1
[    0.334665] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs
[    0.334757] calling  dquot_init+0x0/0xdd @ 1
[    0.334845] VFS: Disk quotas dquot_6.5.2
[    0.335056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.335156] initcall dquot_init+0x0/0xdd returned 0 after 301 usecs
[    0.335249] calling  init_v2_quota_format+0x0/0xf @ 1
[    0.335349] initcall init_v2_quota_format+0x0/0xf returned 0 after 1 usecs
[    0.335442] calling  proc_cmdline_init+0x0/0x1c @ 1
[    0.335535] initcall proc_cmdline_init+0x0/0x1c returned 0 after 2 usecs
[    0.335629] calling  proc_cpuinfo_init+0x0/0x1c @ 1
[    0.335723] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 2 usecs
[    0.335815] calling  proc_devices_init+0x0/0x1c @ 1
[    0.335909] initcall proc_devices_init+0x0/0x1c returned 0 after 2 usecs
[    0.336010] calling  proc_interrupts_init+0x0/0x1c @ 1
[    0.336103] initcall proc_interrupts_init+0x0/0x1c returned 0 after 2 usecs
[    0.336197] calling  proc_loadavg_init+0x0/0x1c @ 1
[    0.336297] initcall proc_loadavg_init+0x0/0x1c returned 0 after 2 usecs
[    0.336390] calling  proc_meminfo_init+0x0/0x1c @ 1
[    0.336483] initcall proc_meminfo_init+0x0/0x1c returned 0 after 2 usecs
[    0.336576] calling  proc_stat_init+0x0/0x1c @ 1
[    0.336668] initcall proc_stat_init+0x0/0x1c returned 0 after 2 usecs
[    0.336759] calling  proc_uptime_init+0x0/0x1c @ 1
[    0.336851] initcall proc_uptime_init+0x0/0x1c returned 0 after 2 usecs
[    0.336943] calling  proc_version_init+0x0/0x1c @ 1
[    0.337060] initcall proc_version_init+0x0/0x1c returned 0 after 2 usecs
[    0.337152] calling  proc_softirqs_init+0x0/0x1c @ 1
[    0.337245] initcall proc_softirqs_init+0x0/0x1c returned 0 after 2 usecs
[    0.337347] calling  proc_kcore_init+0x0/0x40 @ 1
[    0.337439] initcall proc_kcore_init+0x0/0x40 returned 0 after 2 usecs
[    0.337532] calling  vmcore_init+0x0/0xa0b @ 1
[    0.337624] initcall vmcore_init+0x0/0xa0b returned 0 after 2 usecs
[    0.337716] calling  proc_kmsg_init+0x0/0x1f @ 1
[    0.337808] initcall proc_kmsg_init+0x0/0x1f returned 0 after 2 usecs
[    0.337901] calling  proc_page_init+0x0/0x33 @ 1
[    0.337995] initcall proc_page_init+0x0/0x33 returned 0 after 3 usecs
[    0.338093] calling  init_devpts_fs+0x0/0x41 @ 1
[    0.338196] initcall init_devpts_fs+0x0/0x41 returned 0 after 12 usecs
[    0.338296] calling  init_ext3_fs+0x0/0x5f @ 1
[    0.338545] initcall init_ext3_fs+0x0/0x5f returned 0 after 154 usecs
[    0.338636] calling  journal_init+0x0/0x85 @ 1
[    0.338965] initcall journal_init+0x0/0x85 returned 0 after 232 usecs
[    0.339070] calling  init_ramfs_fs+0x0/0xf @ 1
[    0.339161] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs
[    0.339254] calling  init_hugetlbfs_fs+0x0/0x84 @ 1
[    0.339441] initcall init_hugetlbfs_fs+0x0/0x84 returned 0 after 88 usecs
[    0.339535] calling  init_fat_fs+0x0/0x46 @ 1
[    0.339774] initcall init_fat_fs+0x0/0x46 returned 0 after 145 usecs
[    0.339866] calling  init_vfat_fs+0x0/0xf @ 1
[    0.339957] initcall init_vfat_fs+0x0/0xf returned 0 after 2 usecs
[    0.340057] calling  init_msdos_fs+0x0/0xf @ 1
[    0.340148] initcall init_msdos_fs+0x0/0xf returned 0 after 2 usecs
[    0.340240] calling  init_iso9660_fs+0x0/0x61 @ 1
[    0.340422] initcall init_iso9660_fs+0x0/0x61 returned 0 after 81 usecs
[    0.340515] calling  init_nfs_fs+0x0/0xf9 @ 1
[    0.340839] initcall init_nfs_fs+0x0/0xf9 returned 0 after 228 usecs
[    0.340931] calling  init_nlm+0x0/0x1c @ 1
[    0.341054] initcall init_nlm+0x0/0x1c returned 0 after 20 usecs
[    0.341146] calling  init_nls_cp437+0x0/0xf @ 1
[    0.341238] initcall init_nls_cp437+0x0/0xf returned 0 after 2 usecs
[    0.341339] calling  init_nls_ascii+0x0/0xf @ 1
[    0.341430] initcall init_nls_ascii+0x0/0xf returned 0 after 1 usecs
[    0.341523] calling  init_nls_iso8859_1+0x0/0xf @ 1
[    0.341615] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 1 usecs
[    0.341707] calling  init_nls_utf8+0x0/0x1f @ 1
[    0.341798] initcall init_nls_utf8+0x0/0x1f returned 0 after 1 usecs
[    0.341891] calling  init_autofs4_fs+0x0/0x1e @ 1
[    0.342055] initcall init_autofs4_fs+0x0/0x1e returned 0 after 71 usecs
[    0.342148] calling  ipc_init+0x0/0x20 @ 1
[    0.342239] msgmni has been set to 1725
[    0.342337] initcall ipc_init+0x0/0x20 returned 0 after 98 usecs
[    0.342430] calling  ipc_sysctl_init+0x0/0x11 @ 1
[    0.342553] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 32 usecs
[    0.342647] calling  init_mqueue_fs+0x0/0x9e @ 1
[    0.342845] initcall init_mqueue_fs+0x0/0x9e returned 0 after 104 usecs
[    0.342938] calling  key_proc_init+0x0/0x48 @ 1
[    0.343041] initcall key_proc_init+0x0/0x48 returned 0 after 4 usecs
[    0.343134] calling  selinux_nf_ip_init+0x0/0x54 @ 1
[    0.343222] SELinux:  Registering netfilter hooks
[    0.343321] initcall selinux_nf_ip_init+0x0/0x54 returned 0 after 94 usecs
[    0.343414] calling  init_sel_fs+0x0/0x5a @ 1
[    0.343585] initcall init_sel_fs+0x0/0x5a returned 0 after 76 usecs
[    0.343677] calling  selnl_init+0x0/0x46 @ 1
[    0.343773] initcall selnl_init+0x0/0x46 returned 0 after 6 usecs
[    0.343864] calling  sel_netif_init+0x0/0x57 @ 1
[    0.343957] initcall sel_netif_init+0x0/0x57 returned 0 after 3 usecs
[    0.344056] calling  sel_netnode_init+0x0/0x68 @ 1
[    0.344149] initcall sel_netnode_init+0x0/0x68 returned 0 after 2 usecs
[    0.344241] calling  sel_netport_init+0x0/0x68 @ 1
[    0.344340] initcall sel_netport_init+0x0/0x68 returned 0 after 2 usecs
[    0.344433] calling  aurule_init+0x0/0x30 @ 1
[    0.344523] initcall aurule_init+0x0/0x30 returned 0 after 1 usecs
[    0.344615] calling  crypto_wq_init+0x0/0x29 @ 1
[    0.344761] initcall crypto_wq_init+0x0/0x29 returned 0 after 54 usecs
[    0.344854] calling  crypto_algapi_init+0x0/0xc @ 1
[    0.344947] initcall crypto_algapi_init+0x0/0xc returned 0 after 3 usecs
[    0.345048] calling  chainiv_module_init+0x0/0xf @ 1
[    0.345141] initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs
[    0.345234] calling  eseqiv_module_init+0x0/0xf @ 1
[    0.345333] initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs
[    0.345425] calling  hmac_module_init+0x0/0xf @ 1
[    0.345517] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs
[    0.345609] calling  md5_mod_init+0x0/0xf @ 1
[    0.345762] initcall md5_mod_init+0x0/0xf returned 0 after 62 usecs
[    0.345855] calling  sha1_generic_mod_init+0x0/0xf @ 1
[    0.345998] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 50 usecs
[    0.346100] calling  crypto_ecb_module_init+0x0/0xf @ 1
[    0.346193] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs
[    0.346291] calling  crypto_cbc_module_init+0x0/0xf @ 1
[    0.346384] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 1 usecs
[    0.346477] calling  des_generic_mod_init+0x0/0x33 @ 1
[    0.346690] initcall des_generic_mod_init+0x0/0x33 returned 0 after 119 usecs
[    0.346785] calling  aes_init+0x0/0xf @ 1
[    0.346945] initcall aes_init+0x0/0xf returned 0 after 69 usecs
[    0.347046] calling  arc4_init+0x0/0xf @ 1
[    0.347226] initcall arc4_init+0x0/0xf returned 0 after 88 usecs
[    0.347324] calling  crypto_authenc_module_init+0x0/0xf @ 1
[    0.347417] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 1 usecs
[    0.347547] calling  krng_mod_init+0x0/0xf @ 1
[    0.347669] alg: No test for stdrng (krng)
[    0.347767] initcall krng_mod_init+0x0/0xf returned 0 after 126 usecs
[    0.347861] calling  proc_genhd_init+0x0/0x2d @ 1
[    0.347956] initcall proc_genhd_init+0x0/0x2d returned 0 after 4 usecs
[    0.348056] calling  bsg_init+0x0/0x10d @ 1
[    0.348296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.348427] initcall bsg_init+0x0/0x10d returned 0 after 275 usecs
[    0.348519] calling  noop_init+0x0/0x11 @ 1
[    0.348608] io scheduler noop registered
[    0.348696] initcall noop_init+0x0/0x11 returned 0 after 85 usecs
[    0.348786] calling  as_init+0x0/0x11 @ 1
[    0.348874] io scheduler anticipatory registered
[    0.348964] initcall as_init+0x0/0x11 returned 0 after 86 usecs
[    0.349062] calling  deadline_init+0x0/0x11 @ 1
[    0.349150] io scheduler deadline registered
[    0.349239] initcall deadline_init+0x0/0x11 returned 0 after 85 usecs
[    0.349338] calling  cfq_init+0x0/0x91 @ 1
[    0.349515] io scheduler cfq registered (default)
[    0.349605] initcall cfq_init+0x0/0x91 returned 0 after 173 usecs
[    0.349696] calling  percpu_counter_startup+0x0/0x16 @ 1
[    0.349789] initcall percpu_counter_startup+0x0/0x16 returned 0 after 1 usecs
[    0.349882] calling  audit_classes_init+0x0/0x4f @ 1
[    0.349978] initcall audit_classes_init+0x0/0x4f returned 0 after 4 usecs
[    0.350079] calling  pci_init+0x0/0x2c @ 1
[    0.350177] pci 0000:00:02.0: Boot video device
[    0.350285] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350377] pci 0000:00:1d.0: Performing full reset
[    0.350482] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350573] pci 0000:00:1d.1: Performing full reset
[    0.350677] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350769] pci 0000:00:1d.2: Performing full reset
[    0.350873] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350964] pci 0000:00:1d.3: Performing full reset
[    0.351107] initcall pci_init+0x0/0x2c returned 0 after 917 usecs
[    0.351199] calling  pci_proc_init+0x0/0x5b @ 1
[    0.351347] initcall pci_proc_init+0x0/0x5b returned 0 after 49 usecs
[    0.351440] calling  pcie_portdrv_init+0x0/0x41 @ 1
[    0.351664]   alloc irq_desc for 24 on node -1
[    0.351752]   alloc kstat_irqs on node -1
[    0.351850] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.351950] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.353132]   alloc irq_desc for 25 on node -1
[    0.353220]   alloc kstat_irqs on node -1
[    0.353324] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.353421] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.353816]   alloc irq_desc for 26 on node -1
[    0.353904]   alloc kstat_irqs on node -1
[    0.353998] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.354105] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.354480]   alloc irq_desc for 27 on node -1
[    0.354567]   alloc kstat_irqs on node -1
[    0.354660] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.354759] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.355139] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 3523 usecs
[    0.355233] calling  aer_service_init+0x0/0x1d @ 1
[    0.355390] initcall aer_service_init+0x0/0x1d returned 0 after 57 usecs
[    0.355483] calling  pci_hotplug_init+0x0/0x18 @ 1
[    0.355573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.355665] initcall pci_hotplug_init+0x0/0x18 returned 0 after 88 usecs
[    0.355757] calling  fb_console_init+0x0/0xf5 @ 1
[    0.355912] initcall fb_console_init+0x0/0xf5 returned 0 after 63 usecs
[    0.356014] calling  genericbl_init+0x0/0xf @ 1
[    0.356161] initcall genericbl_init+0x0/0xf returned 0 after 55 usecs
[    0.356253] calling  efifb_init+0x0/0x1b8 @ 1
[    0.356357] initcall efifb_init+0x0/0x1b8 returned -19 after 9 usecs
[    0.356450] calling  acpi_reserve_resources+0x0/0xc8 @ 1
[    0.356544] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 3 usecs
[    0.356638] calling  irqrouter_init_sysfs+0x0/0x33 @ 1
[    0.356829] initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 97 usecs
[    0.356923] calling  acpi_ac_init+0x0/0x3d @ 1
[    0.357536] ACPI: AC Adapter [AC] (on-line)
[    0.357690] initcall acpi_ac_init+0x0/0x3d returned 0 after 643 usecs
[    0.357785] calling  acpi_button_init+0x0/0x4a @ 1
[    0.357978] input: Power Button as /class/input/input0
[    0.358075] ACPI: Power Button [PWRF]
[    0.358286] input: Lid Switch as /class/input/input1
[    0.358958] ACPI: Lid Switch [LID]
[    0.359153] input: Sleep Button as /class/input/input2
[    0.359245] ACPI: Sleep Button [SLPB]
[    0.359403] initcall acpi_button_init+0x0/0x4a returned 0 after 1490 usecs
[    0.359496] calling  acpi_fan_init+0x0/0x4a @ 1
[    0.359649] initcall acpi_fan_init+0x0/0x4a returned 0 after 61 usecs
[    0.359741] calling  acpi_video_init+0x0/0x6b @ 1
[    0.360402] input: Video Bus as /class/input/input3
[    0.360492] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.360659] initcall acpi_video_init+0x0/0x6b returned 0 after 807 usecs
[    0.360753] calling  acpi_processor_init+0x0/0xe9 @ 1
[    0.361333] ACPI: SSDT 7f6e609e 001ED (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
[    0.362054] ACPI: SSDT 7f6e5de1 00238 (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
[    0.363535] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.363866] processor LNXCPU:00: registered as cooling_device0
[    0.363960] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.364541] ACPI: SSDT 7f6e628b 00094 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
[    0.365193] ACPI: SSDT 7f6e6019 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
[    0.366681] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.367015] processor LNXCPU:01: registered as cooling_device1
[    0.367108] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.367390] initcall acpi_processor_init+0x0/0xe9 returned 0 after 6391 usecs
[    0.367484] calling  acpi_container_init+0x0/0x3d @ 1
[    0.372921] initcall acpi_container_init+0x0/0x3d returned 0 after 5219 usecs
[    0.373026] calling  acpi_thermal_init+0x0/0x6f @ 1
[    0.376397] thermal LNXTHERM:01: registered as thermal_zone0
[    0.376493] ACPI: Thermal Zone [THM0] (55 C)
[    0.378159] thermal LNXTHERM:02: registered as thermal_zone1
[    0.378256] ACPI: Thermal Zone [THM1] (56 C)
[    0.378400] initcall acpi_thermal_init+0x0/0x6f returned 0 after 5157 usecs
[    0.378494] calling  acpi_battery_init+0x0/0x13 @ 1
[    0.420206] ACPI: Battery Slot [BAT0] (battery present)
[    0.420371] initcall acpi_battery_init+0x0/0x13 returned 0 after 40805 usecs
[    0.420467] calling  rand_initialize+0x0/0x25 @ 1
[    0.420582] initcall rand_initialize+0x0/0x25 returned 0 after 23 usecs
[    0.420675] calling  tty_init+0x0/0xd5 @ 1
[    0.425266] initcall tty_init+0x0/0xd5 returned 0 after 4393 usecs
[    0.425361] calling  pty_init+0x0/0x20d @ 1
[    0.425540] initcall pty_init+0x0/0x20d returned 0 after 86 usecs
[    0.425633] calling  sysrq_init+0x0/0x1f @ 1
[    0.425726] initcall sysrq_init+0x0/0x1f returned 0 after 4 usecs
[    0.425818] calling  hpet_init+0x0/0x57 @ 1
[    0.426111] initcall hpet_init+0x0/0x57 returned 0 after 197 usecs
[    0.426202] calling  nvram_init+0x0/0x70 @ 1
[    0.426358] Non-volatile memory driver v1.3
[    0.426448] initcall nvram_init+0x0/0x70 returned 0 after 144 usecs
[    0.426540] calling  mod_init+0x0/0x1ba @ 1
[    0.426734] intel_rng: FWH not detected
[    0.426854] initcall mod_init+0x0/0x1ba returned -19 after 219 usecs
[    0.426948] calling  mod_init+0x0/0x9f @ 1
[    0.427073] initcall mod_init+0x0/0x9f returned -19 after 16 usecs
[    0.427165] calling  mod_init+0x0/0x91 @ 1
[    0.427270] initcall mod_init+0x0/0x91 returned -19 after 15 usecs
[    0.427362] calling  mod_init+0x0/0x41 @ 1
[    0.427451] initcall mod_init+0x0/0x41 returned -19 after 0 usecs
[    0.427543] calling  agp_init+0x0/0x21 @ 1
[    0.427631] Linux agpgart interface v0.103
[    0.427720] initcall agp_init+0x0/0x21 returned 0 after 85 usecs
[    0.427811] calling  agp_amd64_init+0x0/0xc0 @ 1
[    0.427970] initcall agp_amd64_init+0x0/0xc0 returned -19 after 65 usecs
[    0.428083] calling  agp_intel_init+0x0/0x24 @ 1
[    0.428184] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.428933] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    0.432042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.432221] initcall agp_intel_init+0x0/0x24 returned 0 after 3948 usecs
[    0.432324] calling  drm_core_init+0x0/0xea @ 1
[    0.432486] [drm] Initialized drm 1.1.0 20060810
[    0.432577] initcall drm_core_init+0x0/0xea returned 0 after 159 usecs
[    0.432669] calling  i915_init+0x0/0x58 @ 1
[    0.432856] pci 0000:00:02.0: power state changed by ACPI to D0
[    0.432952] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.433066] pci 0000:00:02.0: setting latency timer to 64
[    0.435959] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.436130] initcall i915_init+0x0/0x58 returned 0 after 3288 usecs
[    0.436223] calling  cn_proc_init+0x0/0x30 @ 1
[    0.436325] initcall cn_proc_init+0x0/0x30 returned 0 after 3 usecs
[    0.436416] calling  serial8250_init+0x0/0x113 @ 1
[    0.436506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.436900] async_waiting @ 1
[    0.436986] async_continuing @ 1 after 1 usec
[    0.558108] async_waiting @ 1
[    0.558195] async_continuing @ 1 after 1 usec
[    0.680159] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[    0.680516] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[    0.680720] initcall serial8250_init+0x0/0x113 returned 0 after 238488 usecs
[    0.680814] calling  serial8250_pnp_init+0x0/0xf @ 1
[    0.681118] initcall serial8250_pnp_init+0x0/0xf returned 0 after 208 usecs
[    0.681212] calling  serial8250_pci_init+0x0/0x16 @ 1
[    0.681414] initcall serial8250_pci_init+0x0/0x16 returned 0 after 99 usecs
[    0.681510] calling  topology_sysfs_init+0x0/0x3f @ 1
[    0.681615] initcall topology_sysfs_init+0x0/0x3f returned 0 after 14 usecs
[    0.681709] calling  brd_init+0x0/0x14e @ 1
[    0.684430] brd: module loaded
[    0.684519] initcall brd_init+0x0/0x14e returned 0 after 2657 usecs
[    0.684612] calling  loop_init+0x0/0x166 @ 1
[    0.685961] loop: module loaded
[    0.686059] initcall loop_init+0x0/0x166 returned 0 after 1325 usecs
[    0.686152] calling  cpqarray_init+0x0/0x22b @ 1
[    0.686240] Compaq SMART2 Driver (v 2.6.0)
[    0.686452] initcall cpqarray_init+0x0/0x22b returned -19 after 204 usecs
[    0.686546] calling  mac_hid_init+0x0/0x75 @ 1
[    0.686729] input: Macintosh mouse button emulation as /class/input/input4
[    0.686851] initcall mac_hid_init+0x0/0x75 returned 0 after 209 usecs
[    0.686943] calling  spi_transport_init+0x0/0x6c @ 1
[    0.687171] initcall spi_transport_init+0x0/0x6c returned 0 after 101 usecs
[    0.687272] calling  ahc_linux_init+0x0/0x5c @ 1
[    0.687446] initcall ahc_linux_init+0x0/0x5c returned 0 after 81 usecs
[    0.687538] calling  init_sd+0x0/0xb6 @ 1
[    0.687733] initcall init_sd+0x0/0xb6 returned 0 after 103 usecs
[    0.687825] calling  init_sr+0x0/0x3d @ 1
[    0.687968] initcall init_sr+0x0/0x3d returned 0 after 52 usecs
[    0.688080] calling  init_sg+0x0/0x133 @ 1
[    0.688234] initcall init_sg+0x0/0x133 returned 0 after 62 usecs
[    0.688333] calling  ahci_init+0x0/0x16 @ 1
[    0.688446] ahci 0000:00:1f.2: version 3.0
[    0.688549] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.688679]   alloc irq_desc for 28 on node -1
[    0.688767]   alloc kstat_irqs on node -1
[    0.688863] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    0.689024] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    0.689157] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    0.689255] ahci 0000:00:1f.2: setting latency timer to 64
[    0.689459] scsi0 : ahci
[    0.689686] scsi1 : ahci
[    0.689879] scsi2 : ahci
[    0.690070] scsi3 : ahci
[    0.690291] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28
[    0.690419] ata2: DUMMY
[    0.690502] ata3: DUMMY
[    0.690585] ata4: DUMMY
[    1.250038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.251600] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[    1.251693] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    1.251785] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.253078] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
[    1.253170] ata1.00: 156301488 sectors, multi 16: LBA48 
[    1.254937] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[    1.255050] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    1.255932] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.257229] ata1.00: configured for UDMA/100
[    1.270677] ata1.00: configured for UDMA/100
[    1.270768] ata1: EH complete
[    1.270855] async_waiting @ 1
[    1.270941] async_continuing @ 1 after 1 usec
[    1.271148] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4I PQ: 0 ANSI: 5
[    1.271477] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.271659] sd 0:0:0:0: [sda] Write Protect is off
[    1.271748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.271864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.272142]  sda: sda1 sda2
[    1.659535] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.659772] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.659958] async_waiting @ 1
[    1.660055] async_continuing @ 1 after 1 usec
[    1.660159] async_waiting @ 1
[    1.660245] async_continuing @ 1 after 1 usec
[    1.660355] async_waiting @ 1
[    1.660442] async_continuing @ 1 after 1 usec
[    1.660601] initcall ahci_init+0x0/0x16 returned 0 after 949390 usecs
[    1.660693] calling  piix_init+0x0/0x27 @ 1
[    1.660798] ata_piix 0000:00:1f.1: version 2.13
[    1.660893] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[    1.661028] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.661196] scsi4 : ata_piix
[    1.661393] scsi5 : ata_piix
[    1.662298] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.662391] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.816409] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
[    1.822317] ata5.00: configured for UDMA/33
[    1.823055] async_waiting @ 1
[    1.823142] async_continuing @ 1 after 1 usec
[    1.827280] scsi 4:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
[    1.838286] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.838379] Uniform CD-ROM driver Revision: 3.20
[    1.838690] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.838933] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.839145] ata6: port disabled. ignoring.
[    1.839241] async_waiting @ 1
[    1.839335] async_continuing @ 1 after 1 usec
[    1.839489] initcall piix_init+0x0/0x27 returned 0 after 174516 usecs
[    1.839582] calling  nv_init+0x0/0x16 @ 1
[    1.839737] initcall nv_init+0x0/0x16 returned 0 after 64 usecs
[    1.839829] calling  amd_init+0x0/0x16 @ 1
[    1.839979] initcall amd_init+0x0/0x16 returned 0 after 59 usecs
[    1.840080] calling  mpiix_init+0x0/0x16 @ 1
[    1.840230] initcall mpiix_init+0x0/0x16 returned 0 after 58 usecs
[    1.840327] calling  oldpiix_init+0x0/0x16 @ 1
[    1.840478] initcall oldpiix_init+0x0/0x16 returned 0 after 59 usecs
[    1.840570] calling  sch_init+0x0/0x16 @ 1
[    1.840719] initcall sch_init+0x0/0x16 returned 0 after 57 usecs
[    1.840810] calling  ata_generic_init+0x0/0x16 @ 1
[    1.840963] initcall ata_generic_init+0x0/0x16 returned 0 after 60 usecs
[    1.841065] calling  e1000_init_module+0x0/0x6e @ 1
[    1.841154] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[    1.841246] Copyright (c) 1999-2006 Intel Corporation.
[    1.841412] initcall e1000_init_module+0x0/0x6e returned 0 after 251 usecs
[    1.841505] calling  e1000_init_module+0x0/0x53 @ 1
[    1.841594] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    1.841683] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    1.841874] e1000e 0000:02:00.0: Disabling L1 ASPM
[    1.842048] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.842149] e1000e 0000:02:00.0: setting latency timer to 64
[    1.842419]   alloc irq_desc for 29 on node -1
[    1.842507]   alloc kstat_irqs on node -1
[    1.842609] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    1.883473] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
[    1.925641] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2
[    1.925771] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.925937] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[    1.926107] initcall e1000_init_module+0x0/0x53 returned 0 after 82530 usecs
[    1.926200] calling  vortex_init+0x0/0x9b @ 1
[    1.926364] initcall vortex_init+0x0/0x9b returned 0 after 66 usecs
[    1.926457] calling  ne2k_pci_init+0x0/0x16 @ 1
[    1.926608] initcall ne2k_pci_init+0x0/0x16 returned 0 after 60 usecs
[    1.926701] calling  e100_init_module+0x0/0x4d @ 1
[    1.926790] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.926880] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.927046] initcall e100_init_module+0x0/0x4d returned 0 after 248 usecs
[    1.927138] calling  tg3_init+0x0/0x16 @ 1
[    1.927304] initcall tg3_init+0x0/0x16 returned 0 after 74 usecs
[    1.927396] calling  bnx2_init+0x0/0x16 @ 1
[    1.927547] initcall bnx2_init+0x0/0x16 returned 0 after 59 usecs
[    1.927639] calling  sky2_init_module+0x0/0x20 @ 1
[    1.927727] sky2 driver version 1.23
[    1.927880] initcall sky2_init_module+0x0/0x20 returned 0 after 147 usecs
[    1.927973] calling  net_olddevs_init+0x0/0x81 @ 1
[    1.928076] initcall net_olddevs_init+0x0/0x81 returned 0 after 5 usecs
[    1.928169] calling  init_nic+0x0/0x16 @ 1
[    1.928328] initcall init_nic+0x0/0x16 returned 0 after 66 usecs
[    1.928420] calling  rtl8139_init_module+0x0/0x16 @ 1
[    1.928576] initcall rtl8139_init_module+0x0/0x16 returned 0 after 64 usecs
[    1.928670] calling  rtl8169_init_module+0x0/0x16 @ 1
[    1.928823] initcall rtl8169_init_module+0x0/0x16 returned 0 after 60 usecs
[    1.928917] calling  init_ath5k_pci+0x0/0x2d @ 1
[    1.929084] initcall init_ath5k_pci+0x0/0x2d returned 0 after 68 usecs
[    1.929176] calling  init_netconsole+0x0/0x1a2 @ 1
[    1.929275] netconsole: local port 4444
[    1.929361] netconsole: local IP 10.0.1.15
[    1.929448] netconsole: interface eth0
[    1.929535] netconsole: remote port 4444
[    1.929621] netconsole: remote IP 10.0.1.21
[    1.929709] netconsole: remote ethernet address 00:30:48:c6:86:26
[    1.929801] netconsole: device eth0 not up yet, forcing it
[    1.943283] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    1.994113] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    4.659020] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[    4.817190] console [netcon0] enabled
[    4.817294] netconsole: network logging started
[    4.817394] initcall init_netconsole+0x0/0x1a2 returned 0 after 2820429 usecs
[    4.817497] calling  cdrom_init+0x0/0xc @ 1
[    4.817596] initcall cdrom_init+0x0/0xc returned 0 after 1 usecs
[    4.817697] calling  nonstatic_sysfs_init+0x0/0xf @ 1
[    4.817803] initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 5 usecs
[    4.817906] calling  yenta_socket_init+0x0/0x16 @ 1
[    4.818039] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[    4.818164] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[    4.818312] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[    4.818417] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[    4.919062] async_waiting @ 1
[    4.919152] async_continuing @ 1 after 1 usec
[    5.041827] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[    5.041922] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[    5.042032] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[    5.042173] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[    5.042326] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[    5.293140] initcall yenta_socket_init+0x0/0x16 returned 0 after 463995 usecs
[    5.293235] calling  mon_init+0x0/0xe2 @ 1
[    5.293480] initcall mon_init+0x0/0xe2 returned 0 after 131 usecs
[    5.293574] calling  ehci_hcd_init+0x0/0xbf @ 1
[    5.293672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.293774] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[    5.294375] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    5.294474]   alloc irq_desc for 19 on node -1
[    5.294564]   alloc kstat_irqs on node -1
[    5.294664] IOAPIC[0]: Set routing entry (1-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1)
[    5.294802] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    5.294912] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.295024] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.295145] drivers/usb/core/inode.c: creating file 'devices'
[    5.295247] drivers/usb/core/inode.c: creating file '001'
[    5.295428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.295566] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[    5.295707] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    5.295867] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
[    5.299905] ehci_hcd 0000:00:1d.7: debug port 1
[    5.300000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.300108] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    5.300219] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
[    5.300328] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    5.304353] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    5.310015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.310158] usb usb1: default language 0x0409
[    5.310254] usb usb1: udev 1, busnum 1, minor = 0
[    5.310353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.310454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.310591] usb usb1: Product: EHCI Host Controller
[    5.310687] usb usb1: Manufacturer: Linux 2.6.31-rc5-tip ehci_hcd
[    5.310786] usb usb1: SerialNumber: 0000:00:1d.7
[    5.310930] usb usb1: uevent
[    5.311098] usb usb1: usb_probe_device
[    5.311187] usb usb1: configuration #1 chosen from 1 choice
[    5.311297] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    5.311412] usb 1-0:1.0: uevent
[    5.311563] hub 1-0:1.0: usb_probe_interface
[    5.311653] hub 1-0:1.0: usb_probe_interface - got id
[    5.311751] hub 1-0:1.0: USB hub found
[    5.311851] hub 1-0:1.0: 8 ports detected
[    5.311946] hub 1-0:1.0: standalone hub
[    5.312049] hub 1-0:1.0: no power switching (usb 1.0)
[    5.312145] hub 1-0:1.0: individual port over-current protection
[    5.312245] hub 1-0:1.0: power on to power good time: 20ms
[    5.312352] hub 1-0:1.0: local power source is good
[    5.312450] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    5.312599] drivers/usb/core/inode.c: creating file '001'
[    5.312771] initcall ehci_hcd_init+0x0/0xbf returned 0 after 18649 usecs
[    5.312865] calling  ohci_hcd_mod_init+0x0/0x94 @ 1
[    5.312963] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.313070] ohci_hcd: block sizes: ed 64 td 64
[    5.313243] initcall ohci_hcd_mod_init+0x0/0x94 returned 0 after 271 usecs
[    5.313344] calling  uhci_hcd_init+0x0/0x10a @ 1
[    5.313441] uhci_hcd: USB Universal Host Controller Interface driver
[    5.314123] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    5.314220] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.314334] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.314433] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.314535] drivers/usb/core/inode.c: creating file '002'
[    5.314718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.314853] uhci_hcd 0000:00:1d.0: detected 2 ports
[    5.314954] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    5.315062] uhci_hcd 0000:00:1d.0: Performing full reset
[    5.315182] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    5.315284] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[    5.315433] usb usb2: default language 0x0409
[    5.315529] usb usb2: udev 1, busnum 2, minor = 128
[    5.315627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.315728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.315865] usb usb2: Product: UHCI Host Controller
[    5.315961] usb usb2: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.316068] usb usb2: SerialNumber: 0000:00:1d.0
[    5.316207] usb usb2: uevent
[    5.316373] usb usb2: usb_probe_device
[    5.317244] usb usb2: configuration #1 chosen from 1 choice
[    5.317354] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    5.317470] usb 2-0:1.0: uevent
[    5.317619] hub 2-0:1.0: usb_probe_interface
[    5.317717] hub 2-0:1.0: usb_probe_interface - got id
[    5.317813] hub 2-0:1.0: USB hub found
[    5.317913] hub 2-0:1.0: 2 ports detected
[    5.318015] hub 2-0:1.0: standalone hub
[    5.318111] hub 2-0:1.0: no power switching (usb 1.0)
[    5.318208] hub 2-0:1.0: individual port over-current protection
[    5.318315] hub 2-0:1.0: power on to power good time: 2ms
[    5.318416] hub 2-0:1.0: local power source is good
[    5.318513] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    5.318631] drivers/usb/core/inode.c: creating file '001'
[    5.318767]   alloc irq_desc for 17 on node -1
[    5.318857]   alloc kstat_irqs on node -1
[    5.318956] IOAPIC[0]: Set routing entry (1-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
[    5.319103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.319208] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.319316] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.319417] drivers/usb/core/inode.c: creating file '003'
[    5.319593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.319729] uhci_hcd 0000:00:1d.1: detected 2 ports
[    5.319830] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    5.319930] uhci_hcd 0000:00:1d.1: Performing full reset
[    5.320048] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    5.320159] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[    5.320293] usb usb3: default language 0x0409
[    5.320397] usb usb3: udev 1, busnum 3, minor = 256
[    5.320494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.320595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.320731] usb usb3: Product: UHCI Host Controller
[    5.320828] usb usb3: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.320927] usb usb3: SerialNumber: 0000:00:1d.1
[    5.321082] usb usb3: uevent
[    5.321232] usb usb3: usb_probe_device
[    5.321327] usb usb3: configuration #1 chosen from 1 choice
[    5.321430] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    5.321545] usb 3-0:1.0: uevent
[    5.321699] hub 3-0:1.0: usb_probe_interface
[    5.321787] hub 3-0:1.0: usb_probe_interface - got id
[    5.321883] hub 3-0:1.0: USB hub found
[    5.321985] hub 3-0:1.0: 2 ports detected
[    5.322087] hub 3-0:1.0: standalone hub
[    5.322182] hub 3-0:1.0: no power switching (usb 1.0)
[    5.322285] hub 3-0:1.0: individual port over-current protection
[    5.322385] hub 3-0:1.0: power on to power good time: 2ms
[    5.322485] hub 3-0:1.0: local power source is good
[    5.322582] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    5.322702] drivers/usb/core/inode.c: creating file '001'
[    5.323510] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[    5.323605]   alloc irq_desc for 18 on node -1
[    5.323693]   alloc kstat_irqs on node -1
[    5.323791] IOAPIC[0]: Set routing entry (1-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
[    5.323929] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.324043] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.324143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.324244] drivers/usb/core/inode.c: creating file '004'
[    5.324427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.324563] uhci_hcd 0000:00:1d.2: detected 2 ports
[    5.324663] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    5.324763] uhci_hcd 0000:00:1d.2: Performing full reset
[    5.324875] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    5.324985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    5.325132] usb usb4: default language 0x0409
[    5.325227] usb usb4: udev 1, busnum 4, minor = 384
[    5.325331] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.325432] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.325568] usb usb4: Product: UHCI Host Controller
[    5.325665] usb usb4: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.325765] usb usb4: SerialNumber: 0000:00:1d.2
[    5.325905] usb usb4: uevent
[    5.326071] usb usb4: usb_probe_device
[    5.326160] usb usb4: configuration #1 chosen from 1 choice
[    5.326264] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    5.326382] usb 4-0:1.0: uevent
[    5.326533] hub 4-0:1.0: usb_probe_interface
[    5.326622] hub 4-0:1.0: usb_probe_interface - got id
[    5.326719] hub 4-0:1.0: USB hub found
[    5.326820] hub 4-0:1.0: 2 ports detected
[    5.326915] hub 4-0:1.0: standalone hub
[    5.327017] hub 4-0:1.0: no power switching (usb 1.0)
[    5.327114] hub 4-0:1.0: individual port over-current protection
[    5.327213] hub 4-0:1.0: power on to power good time: 2ms
[    5.327322] hub 4-0:1.0: local power source is good
[    5.327418] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    5.327536] drivers/usb/core/inode.c: creating file '001'
[    5.327677] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    5.327774] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.327876] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.327977] drivers/usb/core/inode.c: creating file '005'
[    5.328167] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.328311] uhci_hcd 0000:00:1d.3: detected 2 ports
[    5.328411] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[    5.328512] uhci_hcd 0000:00:1d.3: Performing full reset
[    5.328627] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[    5.328768] usb usb5: default language 0x0409
[    5.328863] usb usb5: udev 1, busnum 5, minor = 512
[    5.328961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.329070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.329208] usb usb5: Product: UHCI Host Controller
[    5.329313] usb usb5: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.329413] usb usb5: SerialNumber: 0000:00:1d.3
[    5.329563] usb usb5: uevent
[    5.329713] usb usb5: usb_probe_device
[    5.329801] usb usb5: configuration #1 chosen from 1 choice
[    5.329906] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    5.330029] usb 5-0:1.0: uevent
[    5.330179] hub 5-0:1.0: usb_probe_interface
[    5.330275] hub 5-0:1.0: usb_probe_interface - got id
[    5.330372] hub 5-0:1.0: USB hub found
[    5.330472] hub 5-0:1.0: 2 ports detected
[    5.330568] hub 5-0:1.0: standalone hub
[    5.330663] hub 5-0:1.0: no power switching (usb 1.0)
[    5.330761] hub 5-0:1.0: individual port over-current protection
[    5.330861] hub 5-0:1.0: power on to power good time: 2ms
[    5.330961] hub 5-0:1.0: local power source is good
[    5.331067] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    5.331184] drivers/usb/core/inode.c: creating file '001'
[    5.331381] initcall uhci_hcd_init+0x0/0x10a returned 0 after 17516 usecs
[    5.331476] calling  usblp_init+0x0/0x16 @ 1
[    5.331635] usbcore: registered new interface driver usblp
[    5.331730] initcall usblp_init+0x0/0x16 returned 0 after 152 usecs
[    5.331830] calling  usb_stor_init+0x0/0x42 @ 1
[    5.331927] Initializing USB Mass Storage driver...
[    5.332119] usbcore: registered new interface driver usb-storage
[    5.332211] USB Mass Storage support registered.
[    5.332319] initcall usb_stor_init+0x0/0x42 returned 0 after 381 usecs
[    5.332420] calling  usb_usual_init+0x0/0x30 @ 1
[    5.332603] usbcore: registered new interface driver libusual
[    5.332699] initcall usb_usual_init+0x0/0x30 returned 0 after 176 usecs
[    5.332801] calling  i8042_init+0x0/0x35f @ 1
[    5.333051] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.333202] Platform driver 'i8042' needs updating - please use dev_pm_ops
[    5.341619] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.341716] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.341854] initcall i8042_init+0x0/0x35f returned 0 after 8744 usecs
[    5.341949] calling  serport_init+0x0/0x2b @ 1
[    5.342057] initcall serport_init+0x0/0x2b returned 0 after 1 usecs
[    5.342157] calling  mousedev_init+0x0/0x51 @ 1
[    5.342433] mice: PS/2 mouse device common for all mice
[    5.342526] initcall mousedev_init+0x0/0x51 returned 0 after 263 usecs
[    5.342627] calling  evdev_init+0x0/0xf @ 1
[    5.343079] initcall evdev_init+0x0/0xf returned 0 after 345 usecs
[    5.343173] calling  atkbd_init+0x0/0x20 @ 1
[    5.343350] initcall atkbd_init+0x0/0x20 returned 0 after 72 usecs
[    5.343444] calling  psmouse_init+0x0/0x61 @ 1
[    5.343667] initcall psmouse_init+0x0/0x61 returned 0 after 121 usecs
[    5.343761] calling  cmos_init+0x0/0x65 @ 1
[    5.343890] rtc_cmos 00:07: RTC can wake from S4
[    5.344078] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    5.344201] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    5.344386] initcall cmos_init+0x0/0x65 returned 0 after 513 usecs
[    5.344480] calling  i2c_i801_init+0x0/0x16 @ 1
[    5.344596] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.344903] initcall i2c_i801_init+0x0/0x16 returned 0 after 316 usecs
[    5.344997] calling  dm_init+0x0/0x39 @ 1
[    5.345454] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[    5.345590] initcall dm_init+0x0/0x39 returned 0 after 474 usecs
[    5.345690] calling  dm_mirror_init+0x0/0x69 @ 1
[    5.345811] initcall dm_mirror_init+0x0/0x69 returned 0 after 16 usecs
[    5.345912] calling  dm_dirty_log_init+0x0/0x49 @ 1
[    5.346021] initcall dm_dirty_log_init+0x0/0x49 returned 0 after 1 usecs
[    5.346122] calling  dm_zero_init+0x0/0x28 @ 1
[    5.346221] initcall dm_zero_init+0x0/0x28 returned 0 after 1 usecs
[    5.346330] calling  cpufreq_gov_dbs_init+0x0/0x9f @ 1
[    5.346526] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 88 usecs
[    5.346621] calling  init_ladder+0x0/0xf @ 1
[    5.347188] cpuidle: using governor ladder
[    5.348068] initcall init_ladder+0x0/0xf returned 0 after 1315 usecs
[    5.348169] calling  init_menu+0x0/0xf @ 1
[    5.349088] input: AT Translated Set 2 keyboard as /class/input/input5
[    5.349518] cpuidle: using governor menu
[    5.349610] initcall init_menu+0x0/0xf returned 0 after 1308 usecs
[    5.349711] calling  efivars_init+0x0/0x187 @ 1
[    5.349810] initcall efivars_init+0x0/0x187 returned -19 after 1 usecs
[    5.349912] calling  hid_init+0x0/0x3d @ 1
[    5.350186] initcall hid_init+0x0/0x3d returned 0 after 165 usecs
[    5.350284] calling  a4_init+0x0/0x16 @ 1
[    5.350470] initcall a4_init+0x0/0x16 returned 0 after 71 usecs
[    5.350563] calling  apple_init+0x0/0x2d @ 1
[    5.350740] initcall apple_init+0x0/0x2d returned 0 after 76 usecs
[    5.350833] calling  belkin_init+0x0/0x16 @ 1
[    5.350989] initcall belkin_init+0x0/0x16 returned 0 after 56 usecs
[    5.351097] calling  ch_init+0x0/0x16 @ 1
[    5.351275] initcall ch_init+0x0/0x16 returned 0 after 77 usecs
[    5.351369] calling  ch_init+0x0/0x16 @ 1
[    5.351539] initcall ch_init+0x0/0x16 returned 0 after 70 usecs
[    5.351632] calling  cp_init+0x0/0x16 @ 1
[    5.351791] initcall cp_init+0x0/0x16 returned 0 after 60 usecs
[    5.351885] calling  dr_init+0x0/0x16 @ 1
[    5.352056] initcall dr_init+0x0/0x16 returned 0 after 71 usecs
[    5.352149] calling  ez_init+0x0/0x16 @ 1
[    5.352342] initcall ez_init+0x0/0x16 returned 0 after 93 usecs
[    5.352435] calling  gyration_init+0x0/0x16 @ 1
[    5.352620] initcall gyration_init+0x0/0x16 returned 0 after 83 usecs
[    5.352715] calling  ks_init+0x0/0x16 @ 1
[    5.352904] initcall ks_init+0x0/0x16 returned 0 after 89 usecs
[    5.352998] calling  kye_init+0x0/0x16 @ 1
[    5.353189] initcall kye_init+0x0/0x16 returned 0 after 73 usecs
[    5.353285] calling  lg_init+0x0/0x16 @ 1
[    5.353468] initcall lg_init+0x0/0x16 returned 0 after 71 usecs
[    5.353562] calling  ms_init+0x0/0x16 @ 1
[    5.353974] initcall ms_init+0x0/0x16 returned 0 after 300 usecs
[    5.354089] calling  mr_init+0x0/0x16 @ 1
[    5.354263] initcall mr_init+0x0/0x16 returned 0 after 72 usecs
[    5.354364] calling  ntrig_init+0x0/0x16 @ 1
[    5.354534] initcall ntrig_init+0x0/0x16 returned 0 after 69 usecs
[    5.354628] calling  pl_init+0x0/0x16 @ 1
[    5.354794] initcall pl_init+0x0/0x16 returned 0 after 66 usecs
[    5.354887] calling  pl_init+0x0/0x16 @ 1
[    5.355059] initcall pl_init+0x0/0x16 returned 0 after 72 usecs
[    5.355151] calling  samsung_init+0x0/0x16 @ 1
[    5.355343] initcall samsung_init+0x0/0x16 returned 0 after 90 usecs
[    5.355436] calling  sjoy_init+0x0/0x16 @ 1
[    5.355616] initcall sjoy_init+0x0/0x16 returned 0 after 79 usecs
[    5.355710] calling  sony_init+0x0/0x16 @ 1
[    5.355898] initcall sony_init+0x0/0x16 returned 0 after 87 usecs
[    5.355992] calling  sp_init+0x0/0x16 @ 1
[    5.356194] initcall sp_init+0x0/0x16 returned 0 after 85 usecs
[    5.356290] calling  ga_init+0x0/0x16 @ 1
[    5.356481] initcall ga_init+0x0/0x16 returned 0 after 75 usecs
[    5.356574] calling  tm_init+0x0/0x16 @ 1
[    5.356733] initcall tm_init+0x0/0x16 returned 0 after 59 usecs
[    5.356826] calling  ts_init+0x0/0x16 @ 1
[    5.357000] initcall ts_init+0x0/0x16 returned 0 after 67 usecs
[    5.357106] calling  zp_init+0x0/0x16 @ 1
[    5.357289] initcall zp_init+0x0/0x16 returned 0 after 82 usecs
[    5.357382] calling  hid_init+0x0/0xaa @ 1
[    5.357681] usbcore: registered new interface driver hiddev
[    5.357859] usbcore: registered new interface driver usbhid
[    5.357951] usbhid: v2.6:USB HID core driver
[    5.358071] initcall hid_init+0x0/0xaa returned 0 after 576 usecs
[    5.358171] calling  usb_mouse_init+0x0/0x2d @ 1
[    5.358602] usbcore: registered new interface driver usbmouse
[    5.358695] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[    5.358797] initcall usb_mouse_init+0x0/0x2d returned 0 after 511 usecs
[    5.358899] calling  eeepc_laptop_init+0x0/0x3e1 @ 1
[    5.359180] initcall eeepc_laptop_init+0x0/0x3e1 returned -19 after 176 usecs
[    5.359277] calling  init_soundcore+0x0/0x64 @ 1
[    5.359459] initcall init_soundcore+0x0/0x64 returned 0 after 66 usecs
[    5.359553] calling  alsa_sound_init+0x0/0x77 @ 1
[    5.359667] Advanced Linux Sound Architecture Driver Version 1.0.20.
[    5.359770] initcall alsa_sound_init+0x0/0x77 returned 0 after 113 usecs
[    5.359872] calling  alsa_hwdep_init+0x0/0x46 @ 1
[    5.359974] initcall alsa_hwdep_init+0x0/0x46 returned 0 after 3 usecs
[    5.360098] calling  alsa_timer_init+0x0/0x12c @ 1
[    5.360287] initcall alsa_timer_init+0x0/0x12c returned 0 after 88 usecs
[    5.360382] calling  snd_hrtimer_init+0x0/0xd4 @ 1
[    5.360482] initcall snd_hrtimer_init+0x0/0xd4 returned 0 after 1 usecs
[    5.360584] calling  alsa_pcm_init+0x0/0x4d @ 1
[    5.360684] initcall alsa_pcm_init+0x0/0x4d returned 0 after 2 usecs
[    5.360785] calling  snd_mem_init+0x0/0x24 @ 1
[    5.360887] initcall snd_mem_init+0x0/0x24 returned 0 after 3 usecs
[    5.360987] calling  alsa_mixer_oss_init+0x0/0x2d @ 1
[    5.361111] initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 8 usecs
[    5.361206] calling  alsa_pcm_oss_init+0x0/0x76 @ 1
[    5.361322] initcall alsa_pcm_oss_init+0x0/0x76 returned 0 after 1 usecs
[    5.361431] calling  alsa_seq_init+0x0/0x51 @ 1
[    5.361905] initcall alsa_seq_init+0x0/0x51 returned 0 after 366 usecs
[    5.362000] calling  alsa_seq_device_init+0x0/0x4e @ 1
[    5.362110] initcall alsa_seq_device_init+0x0/0x4e returned 0 after 2 usecs
[    5.362212] calling  alsa_seq_midi_event_init+0x0/0x7 @ 1
[    5.362317] initcall alsa_seq_midi_event_init+0x0/0x7 returned 0 after 1 usecs
[    5.362466] calling  alsa_seq_oss_init+0x0/0x130 @ 1
[    5.362833] initcall alsa_seq_oss_init+0x0/0x130 returned 0 after 260 usecs
[    5.362929] calling  alsa_seq_dummy_init+0x0/0xa7 @ 1
[    5.363059] initcall alsa_seq_dummy_init+0x0/0xa7 returned 0 after 14 usecs
[    5.363153] calling  patch_realtek_init+0x0/0xf @ 1
[    5.363258] initcall patch_realtek_init+0x0/0xf returned 0 after 4 usecs
[    5.363371] calling  patch_cmedia_init+0x0/0xf @ 1
[    5.363472] initcall patch_cmedia_init+0x0/0xf returned 0 after 1 usecs
[    5.363572] calling  patch_analog_init+0x0/0xf @ 1
[    5.363673] initcall patch_analog_init+0x0/0xf returned 0 after 1 usecs
[    5.363773] calling  patch_sigmatel_init+0x0/0xf @ 1
[    5.363874] initcall patch_sigmatel_init+0x0/0xf returned 0 after 1 usecs
[    5.363975] calling  patch_si3054_init+0x0/0xf @ 1
[    5.364082] initcall patch_si3054_init+0x0/0xf returned 0 after 1 usecs
[    5.364183] calling  patch_atihdmi_init+0x0/0xf @ 1
[    5.364286] initcall patch_atihdmi_init+0x0/0xf returned 0 after 1 usecs
[    5.364397] calling  patch_ca0110_init+0x0/0xf @ 1
[    5.364497] initcall patch_ca0110_init+0x0/0xf returned 0 after 1 usecs
[    5.364597] calling  patch_conexant_init+0x0/0xf @ 1
[    5.364697] initcall patch_conexant_init+0x0/0xf returned 0 after 1 usecs
[    5.364798] calling  patch_via_init+0x0/0xf @ 1
[    5.364898] initcall patch_via_init+0x0/0xf returned 0 after 1 usecs
[    5.364998] calling  patch_nvhdmi_init+0x0/0xf @ 1
[    5.365106] initcall patch_nvhdmi_init+0x0/0xf returned 0 after 1 usecs
[    5.365208] calling  patch_intelhdmi_init+0x0/0xf @ 1
[    5.365312] initcall patch_intelhdmi_init+0x0/0xf returned 0 after 1 usecs
[    5.365425] calling  alsa_card_azx_init+0x0/0x16 @ 1
[    5.365557] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.365689] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    5.365808] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.399675] initcall alsa_card_azx_init+0x0/0x16 returned 0 after 33348 usecs
[    5.399772] calling  alsa_sound_last_init+0x0/0x50 @ 1
[    5.399872] ALSA device list:
[    5.399965]   #0: HDA Intel at 0xee240000 irq 17
[    5.400078] initcall alsa_sound_last_init+0x0/0x50 returned 0 after 199 usecs
[    5.400181] calling  flow_cache_init+0x0/0x141 @ 1
[    5.400318] initcall flow_cache_init+0x0/0x141 returned 0 after 33 usecs
[    5.400412] calling  llc_init+0x0/0x1b @ 1
[    5.400512] initcall llc_init+0x0/0x1b returned 0 after 1 usecs
[    5.400612] calling  snap_init+0x0/0x31 @ 1
[    5.400710] initcall snap_init+0x0/0x31 returned 0 after 1 usecs
[    5.400811] calling  rif_init+0x0/0x6b @ 1
[    5.400934] initcall rif_init+0x0/0x6b returned 0 after 24 usecs
[    5.401056] calling  blackhole_module_init+0x0/0xf @ 1
[    5.401158] initcall blackhole_module_init+0x0/0xf returned 0 after 1 usecs
[    5.401263] calling  nfnetlink_init+0x0/0x51 @ 1
[    5.401372] Netfilter messages via NETLINK v0.30.
[    5.401479] initcall nfnetlink_init+0x0/0x51 returned 0 after 102 usecs
[    5.401581] calling  nfnetlink_log_init+0x0/0xb3 @ 1
[    5.401699] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 10 usecs
[    5.401802] calling  nf_conntrack_standalone_init+0x0/0xf @ 1
[    5.401903] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.402740] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 816 usecs
[    5.402874] calling  ctnetlink_init+0x0/0x62 @ 1
[    5.402971] ctnetlink v0.93: registering with nfnetlink.
[    5.403091] initcall ctnetlink_init+0x0/0x62 returned 0 after 115 usecs
[    5.403194] calling  nf_conntrack_ftp_init+0x0/0x189 @ 1
[    5.403300] initcall nf_conntrack_ftp_init+0x0/0x189 returned 0 after 3 usecs
[    5.403412] calling  nf_conntrack_irc_init+0x0/0x17e @ 1
[    5.403517] initcall nf_conntrack_irc_init+0x0/0x17e returned 0 after 2 usecs
[    5.403619] calling  nf_conntrack_sip_init+0x0/0x159 @ 1
[    5.403721] initcall nf_conntrack_sip_init+0x0/0x159 returned 0 after 1 usecs
[    5.403823] calling  xt_init+0x0/0xda @ 1
[    5.403922] initcall xt_init+0x0/0xda returned 0 after 1 usecs
[    5.404029] calling  tcpudp_mt_init+0x0/0x14 @ 1
[    5.404130] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 2 usecs
[    5.404231] calling  connsecmark_tg_init+0x0/0xf @ 1
[    5.404345] initcall connsecmark_tg_init+0x0/0xf returned 0 after 10 usecs
[    5.404447] calling  mark_tg_init+0x0/0x14 @ 1
[    5.404547] initcall mark_tg_init+0x0/0x14 returned 0 after 1 usecs
[    5.404648] calling  nflog_tg_init+0x0/0xf @ 1
[    5.404747] initcall nflog_tg_init+0x0/0xf returned 0 after 1 usecs
[    5.404848] calling  secmark_tg_init+0x0/0xf @ 1
[    5.404948] initcall secmark_tg_init+0x0/0xf returned 0 after 1 usecs
[    5.405057] calling  tcpmss_tg_init+0x0/0x14 @ 1
[    5.405156] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 1 usecs
[    5.405259] calling  conntrack_mt_init+0x0/0x14 @ 1
[    5.405374] initcall conntrack_mt_init+0x0/0x14 returned 0 after 1 usecs
[    5.405475] calling  mark_mt_init+0x0/0x14 @ 1
[    5.405757] initcall mark_mt_init+0x0/0x14 returned 0 after 172 usecs
[    5.405851] calling  policy_mt_init+0x0/0x14 @ 1
[    5.405952] initcall policy_mt_init+0x0/0x14 returned 0 after 1 usecs
[    5.406838] calling  state_mt_init+0x0/0x14 @ 1
[    5.406946] initcall state_mt_init+0x0/0x14 returned 0 after 1 usecs
[    5.407052] calling  sysctl_ipv4_init+0x0/0x3f @ 1
[    5.407600] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 438 usecs
[    5.407694] calling  init_syncookies+0x0/0x16 @ 1
[    5.407844] initcall init_syncookies+0x0/0x16 returned 0 after 48 usecs
[    5.407938] calling  tunnel4_init+0x0/0x5a @ 1
[    5.408045] initcall tunnel4_init+0x0/0x5a returned 0 after 1 usecs
[    5.408147] calling  ipv4_netfilter_init+0x0/0xf @ 1
[    5.408248] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 1 usecs
[    5.408352] calling  nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1
[    5.409022] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 535 usecs
[    5.409154] calling  nf_nat_init+0x0/0xea @ 1
[    5.409290] initcall nf_nat_init+0x0/0xea returned 0 after 36 usecs
[    5.409383] calling  nf_defrag_init+0x0/0x14 @ 1
[    5.409483] initcall nf_defrag_init+0x0/0x14 returned 0 after 1 usecs
[    5.409584] calling  nf_nat_ftp_init+0x0/0x1e @ 1
[    5.409684] initcall nf_nat_ftp_init+0x0/0x1e returned 0 after 1 usecs
[    5.409784] calling  nf_nat_irc_init+0x0/0x1e @ 1
[    5.409884] initcall nf_nat_irc_init+0x0/0x1e returned 0 after 1 usecs
[    5.409983] calling  nf_nat_sip_init+0x0/0x91 @ 1
[    5.410091] initcall nf_nat_sip_init+0x0/0x91 returned 0 after 1 usecs
[    5.410191] calling  ip_tables_init+0x0/0x92 @ 1
[    5.410298] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.410407] initcall ip_tables_init+0x0/0x92 returned 0 after 112 usecs
[    5.410507] calling  iptable_filter_init+0x0/0x5d @ 1
[    5.410615] initcall iptable_filter_init+0x0/0x5d returned 0 after 8 usecs
[    5.410716] calling  iptable_mangle_init+0x0/0x38 @ 1
[    5.410822] initcall iptable_mangle_init+0x0/0x38 returned 0 after 5 usecs
[    5.410924] calling  nf_nat_standalone_init+0x0/0x73 @ 1
[    5.411036] initcall nf_nat_standalone_init+0x0/0x73 returned 0 after 5 usecs
[    5.411139] calling  log_tg_init+0x0/0x24 @ 1
[    5.411239] initcall log_tg_init+0x0/0x24 returned 0 after 1 usecs
[    5.411342] calling  masquerade_tg_init+0x0/0x2d @ 1
[    5.411693] initcall masquerade_tg_init+0x0/0x2d returned 0 after 225 usecs
[    5.411788] calling  reject_tg_init+0x0/0xf @ 1
[    5.411888] initcall reject_tg_init+0x0/0xf returned 0 after 1 usecs
[    5.411989] calling  ulog_tg_init+0x0/0xbe @ 1
[    5.412099] initcall ulog_tg_init+0x0/0xbe returned 0 after 4 usecs
[    5.412199] calling  cubictcp_register+0x0/0x93 @ 1
[    5.412301] TCP cubic registered
[    5.412410] initcall cubictcp_register+0x0/0x93 returned 0 after 105 usecs
[    5.412512] calling  xfrm_user_init+0x0/0x40 @ 1
[    5.412608] Initializing XFRM netlink socket
[    5.412709] initcall xfrm_user_init+0x0/0x40 returned 0 after 97 usecs
[    5.412810] calling  inet6_init+0x0/0x277 @ 1
[    5.413051] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
[    5.413184] hub 1-0:1.0: port 8: status 0501 change 0001
[    5.413671] NET: Registered protocol family 10
[    5.415678] initcall inet6_init+0x0/0x277 returned 0 after 2703 usecs
[    5.415774] calling  ah6_init+0x0/0x5a @ 1
[    5.415875] initcall ah6_init+0x0/0x5a returned 0 after 1 usecs
[    5.415974] calling  esp6_init+0x0/0x5a @ 1
[    5.416081] initcall esp6_init+0x0/0x5a returned 0 after 1 usecs
[    5.416181] calling  xfrm6_transport_init+0x0/0x14 @ 1
[    5.416285] initcall xfrm6_transport_init+0x0/0x14 returned 0 after 1 usecs
[    5.416396] calling  xfrm6_mode_tunnel_init+0x0/0x14 @ 1
[    5.416497] initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 1 usecs
[    5.416598] calling  xfrm6_beet_init+0x0/0x14 @ 1
[    5.416698] initcall xfrm6_beet_init+0x0/0x14 returned 0 after 1 usecs
[    5.416799] calling  ip6_tables_init+0x0/0x92 @ 1
[    5.416904] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.417011] initcall ip6_tables_init+0x0/0x92 returned 0 after 110 usecs
[    5.417113] calling  ip6table_filter_init+0x0/0x5d @ 1
[    5.417459] initcall ip6table_filter_init+0x0/0x5d returned 0 after 233 usecs
[    5.417560] calling  ip6table_mangle_init+0x0/0x38 @ 1
[    5.417668] initcall ip6table_mangle_init+0x0/0x38 returned 0 after 6 usecs
[    5.417769] calling  nf_conntrack_l3proto_ipv6_init+0x0/0xef @ 1
[    5.417937] initcall nf_conntrack_l3proto_ipv6_init+0x0/0xef returned 0 after 64 usecs
[    5.418102] calling  ipv6header_mt6_init+0x0/0xf @ 1
[    5.418205] initcall ipv6header_mt6_init+0x0/0xf returned 0 after 1 usecs
[    5.418309] calling  log_tg6_init+0x0/0x24 @ 1
[    5.418419] initcall log_tg6_init+0x0/0x24 returned 0 after 1 usecs
[    5.418520] calling  reject_tg6_init+0x0/0xf @ 1
[    5.418619] initcall reject_tg6_init+0x0/0xf returned 0 after 1 usecs
[    5.418719] calling  sit_init+0x0/0x5f @ 1
[    5.418815] IPv6 over IPv4 tunneling driver
[    5.419018] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.419887] initcall sit_init+0x0/0x5f returned 0 after 1044 usecs
[    5.419980] calling  packet_init+0x0/0x39 @ 1
[    5.420086] NET: Registered protocol family 17
[    5.420426] initcall packet_init+0x0/0x39 returned 0 after 329 usecs
[    5.420528] calling  init_sunrpc+0x0/0x53 @ 1
[    5.420932] RPC: Registered udp transport module.
[    5.421031] RPC: Registered tcp transport module.
[    5.421131] initcall init_sunrpc+0x0/0x53 returned 0 after 492 usecs
[    5.421232] calling  init_rpcsec_gss+0x0/0x3f @ 1
[    5.421344] initcall init_rpcsec_gss+0x0/0x3f returned 0 after 8 usecs
[    5.421453] calling  init_kerberos_module+0x0/0x26 @ 1
[    5.421556] initcall init_kerberos_module+0x0/0x26 returned 0 after 4 usecs
[    5.421661] calling  severities_debugfs_init+0x0/0x4e @ 1
[    5.421770] initcall severities_debugfs_init+0x0/0x4e returned 0 after 9 usecs
[    5.421910] calling  acpi_cpufreq_init+0x0/0xbf @ 1
[    5.422347] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.426065] initcall acpi_cpufreq_init+0x0/0xbf returned 0 after 3951 usecs
[    5.426162] calling  hpet_insert_resource+0x0/0x1e @ 1
[    5.426271] initcall hpet_insert_resource+0x0/0x1e returned 0 after 4 usecs
[    5.426381] calling  update_mp_table+0x0/0x3ad @ 1
[    5.426482] initcall update_mp_table+0x0/0x3ad returned 0 after 1 usecs
[    5.426590] calling  lapic_insert_resource+0x0/0x33 @ 1
[    5.426691] initcall lapic_insert_resource+0x0/0x33 returned 0 after 1 usecs
[    5.426793] calling  print_ipi_mode+0x0/0x26 @ 1
[    5.426890] Using IPI No-Shortcut mode
[    5.426986] initcall print_ipi_mode+0x0/0x26 returned 0 after 92 usecs
[    5.427096] calling  init_lapic_nmi_sysfs+0x0/0x33 @ 1
[    5.427196] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 1 usecs
[    5.427301] calling  io_apic_bug_finalize+0x0/0x1c @ 1
[    5.427415] initcall io_apic_bug_finalize+0x0/0x1c returned 0 after 2 usecs
[    5.427517] calling  check_early_ioremap_leak+0x0/0x5e @ 1
[    5.427619] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 1 usecs
[    5.427758] calling  pat_memtype_list_init+0x0/0x23 @ 1
[    5.428110] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.428218] initcall pat_memtype_list_init+0x0/0x23 returned 0 after 351 usecs
[    5.428361] calling  init_oops_id+0x0/0x3a @ 1
[    5.428473] initcall init_oops_id+0x0/0x3a returned 0 after 1 usecs
[    5.428574] calling  disable_boot_consoles+0x0/0x3a @ 1
[    5.428675] initcall disable_boot_consoles+0x0/0x3a returned 0 after 1 usecs
[    5.428777] calling  pm_qos_power_init+0x0/0x54 @ 1
[    5.429120] initcall pm_qos_power_init+0x0/0x54 returned 0 after 237 usecs
[    5.429216] calling  software_resume+0x0/0x19d @ 1
[    5.429319] PM: Resume from disk failed.
[    5.429429] initcall software_resume+0x0/0x19d returned -2 after 105 usecs
[    5.429531] initcall software_resume+0x0/0x19d returned with error code -2 
[    5.429635] calling  debugfs_kprobe_init+0x0/0x78 @ 1
[    5.429742] initcall debugfs_kprobe_init+0x0/0x78 returned 0 after 7 usecs
[    5.429844] calling  taskstats_init+0x0/0x7d @ 1
[    5.429945] registered taskstats version 1
[    5.430051] initcall taskstats_init+0x0/0x7d returned 0 after 107 usecs
[    5.430153] calling  clear_boot_tracer+0x0/0x27 @ 1
[    5.430253] initcall clear_boot_tracer+0x0/0x27 returned 0 after 1 usecs
[    5.430358] calling  max_swapfiles_check+0x0/0x7 @ 1
[    5.430470] initcall max_swapfiles_check+0x0/0x7 returned 0 after 1 usecs
[    5.430571] calling  random32_reseed+0x0/0x7e @ 1
[    5.430684] initcall random32_reseed+0x0/0x7e returned 0 after 14 usecs
[    5.430786] calling  pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[    5.430892] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 3 usecs
[    5.431048] calling  pci_sysfs_init+0x0/0x44 @ 1
[    5.431161] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[    5.431714] initcall pci_sysfs_init+0x0/0x44 returned 0 after 554 usecs
[    5.431811] calling  seqgen_init+0x0/0xe @ 1
[    5.431927] initcall seqgen_init+0x0/0xe returned 0 after 16 usecs
[    5.432038] calling  late_resume_init+0x0/0xc2 @ 1
[    5.432136]   Magic number: 5:366:74
[    5.432316] initcall late_resume_init+0x0/0xc2 returned 0 after 174 usecs
[    5.432410] calling  scsi_complete_async_scans+0x0/0xf4 @ 1
[    5.432511] initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 1 usecs
[    5.432649] calling  memmap_init+0x0/0x8a @ 1
[    5.432807] initcall memmap_init+0x0/0x8a returned 0 after 59 usecs
[    5.432901] calling  pci_mmcfg_late_insert_resources+0x0/0x12e @ 1
[    5.433013] initcall pci_mmcfg_late_insert_resources+0x0/0x12e returned 0 after 10 usecs
[    5.433153] calling  tcp_congestion_default+0x0/0xf @ 1
[    5.433257] initcall tcp_congestion_default+0x0/0xf returned 0 after 1 usecs
[    5.433372] calling  ip_auto_config+0x0/0xd22 @ 1
[    5.433475] initcall ip_auto_config+0x0/0xd22 returned 0 after 4 usecs
[    5.433576] calling  initialize_hashrnd+0x0/0x16 @ 1
[    5.433680] initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs
[    5.512059] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000
[    5.512156] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[    5.563254] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
[    5.563350] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
[    5.563490] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
[    5.614058] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
[    5.614211] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.614311] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
[    5.704097] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    5.704195] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
[    5.704315] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[    5.808059] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[    5.910056] usb 5-2: new full speed USB device using uhci_hcd and address 2
[    6.000070] Clocksource tsc unstable (delta = -270104002 ns)
[    6.011844] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
[    6.011976] serio: Synaptics pass-through port at isa0060/serio1/input0
[    6.030026] usb 5-2: ep0 maxpacket = 8
[    6.053781] usb 5-2: default language 0x0409
[    6.054626] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[    6.058807] async_waiting @ 1
[    6.058903] async_continuing @ 1 after 1 usec
[    6.059373] md: Waiting for all devices to be available before autodetect
[    6.059470] md: If you don't use raid, use raid=noautodetect
[    6.072781] usb 5-2: udev 2, busnum 5, minor = 513
[    6.072872] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[    6.072973] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.073094] usb 5-2: Product: Biometric Coprocessor
[    6.073190] usb 5-2: Manufacturer: STMicroelectronics
[    6.073349] usb 5-2: uevent
[    6.073630] usb 5-2: usb_probe_device
[    6.073719] usb 5-2: configuration #1 chosen from 1 choice
[    6.075783] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[    6.075892] usb 5-2:1.0: uevent
[    6.076112] drivers/usb/core/inode.c: creating file '002'
[    6.076222] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    6.454033] usb usb2: suspend_rh (auto-stop)
[    6.454146] usb usb3: suspend_rh (auto-stop)
[    6.454261] usb usb4: suspend_rh (auto-stop)
[    7.704063] hub 2-0:1.0: hub_suspend
[    7.704155] usb usb2: bus auto-suspend
[    7.704249] usb usb2: suspend_rh
[    7.704367] hub 3-0:1.0: hub_suspend
[    7.704456] usb usb3: bus auto-suspend
[    7.704551] usb usb3: suspend_rh
[    7.704660] hub 4-0:1.0: hub_suspend
[    7.704748] usb usb4: bus auto-suspend
[    7.704843] usb usb4: suspend_rh
[    7.704952] hub 1-0:1.0: hub_suspend
[    7.705050] usb usb1: bus auto-suspend
[    7.705154] ehci_hcd 0000:00:1d.7: suspend root hub
[   11.497204] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   11.725545] input: TPPS/2 IBM TrackPoint as /class/input/input7
[   11.807485] async_waiting @ 1
[   11.807575] async_continuing @ 1 after 1 usec
[   11.807943] md: Autodetecting RAID arrays.
[   11.808049] md: Scanned 0 and added 0 devices.
[   11.808146] md: autorun ...
[   11.808240] md: ... autorun DONE.
[   12.181957] kjournald starting.  Commit interval 5 seconds
[   12.181982] EXT3-fs: mounted filesystem with writeback data mode.
[   12.181993] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   12.182046] async_waiting @ 1
[   12.182050] async_continuing @ 1 after 1 usec
[   12.182062] Freeing unused kernel memory: 376k freed
[   12.182560] Write protecting the kernel text: 4500k
[   12.182721] Write protecting the kernel read-only data: 2196k
[   13.464436] sh used greatest stack depth: 6284 bytes left
[   14.209169] mount used greatest stack depth: 6256 bytes left
[   15.252079] awk used greatest stack depth: 5956 bytes left
[   16.155028] eth0: no IPv6 routers present
[   16.398723] readahead[895]: segfault at 0 ip 00c693b3 sp bfdbd30c error 4 in libc-2.9.so[bf2000+16e000]
[   16.929854] usb usb2: uevent
[   16.929976] usb 2-0:1.0: uevent
[   16.930154] usb usb3: uevent
[   16.930269] usb 3-0:1.0: uevent
[   16.930424] usb usb4: uevent
[   16.930547] usb 4-0:1.0: uevent
[   16.930696] usb usb5: uevent
[   16.930809] usb 5-0:1.0: uevent
[   16.930935] usb 5-2: uevent
[   16.931069] usb 5-2:1.0: uevent
[   16.931226] usb usb1: uevent
[   16.931350] usb 1-0:1.0: uevent
[   25.714165] EXT3 FS on sda1, internal journal
[   27.705850] Adding 4096564k swap on /dev/sda2.  Priority:-1 extents:1 across:4096564k 
[   29.035661] ip used greatest stack depth: 5752 bytes left
[   45.490796] CPUFREQ: ondemand sampling_rate_max sysfs file is deprecated - used by: cat
[  102.555904] ssh used greatest stack depth: 5312 bytes left

# head: baace7ea
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sun Aug 9 12:56:59 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not set
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_EVENT_PROFILE=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_UP_WANTED_1 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks. #

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=y CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#

# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#16 lore raw

Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

Quoted 7 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
Quoted 1 line

rcu: Add second diagnostic check for a possible CPU-hotplug race

has a build problem too:

Quoted 8 lines
Quoted 8 lines

kernel/built-in.o: In function `rcu_cpu_notified':
(.text+0x1d787): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x1174): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x11a8): undefined reference to `cpu_notified'

Maybe we should simplify all those Kconfig rules? It's a maze.

Or I could fix up my scripts so that I once again test the relevant combinations -before- I submit the patch. :-/

Quoted 3 lines

a testbox still managed to sneak in, build another config, boot it and trigger the warning below - is this what you were after? Bootlog below, config attached.

Sigh! I have once again managed to disable testing of !CPU_HOTPLUG. :-(

Patch under way...

Thanx, Paul

Quoted 4,772 lines

Ingo

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-rc5-tip (mingo@europe) (gcc version 4.2.2) #7134 SMP Sun Aug 9 13:04:19 CEST 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
[    0.000000]  BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f6e0000 (usable)
[    0.000000]  modified: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
[    0.000000]  modified: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
[    0.000000]  modified: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] ACPI: RSDP 000f68a0 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 7f6e631f 00074 (v01 LENOVO TP-79    00001020  LTP 00000000)
[    0.000000] ACPI: FACP 7f6e6400 000F4 (v03 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527
[    0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558
[    0.000000] ACPI: DSDT 7f6e65e7 0C765 (v01 LENOVO TP-79    00001020 MSFT 0100000E)
[    0.000000] ACPI: FACS 7f6f4000 00040
[    0.000000] ACPI: SSDT 7f6e65b4 00033 (v01 LENOVO TP-79    00001020 MSFT 0100000E)
[    0.000000] ACPI: ECDT 7f6f2d4c 00052 (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: TCPA 7f6f2d9e 00032 (v02 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: APIC 7f6f2dd0 00068 (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: MCFG 7f6f2e38 0003E (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: HPET 7f6f2e76 00038 (v01 LENOVO TP-79    00001020 LNVO 00000001)
[    0.000000] ACPI: BOOT 7f6f2fd8 00028 (v01 LENOVO TP-79    00001020  LTP 00000001)
[    0.000000] ACPI: SSDT 7f6e58da 00507 (v01 LENOVO TP-79    00001020 INTL 20050513)
[    0.000000] ACPI: SSDT 7f6e5702 001D8 (v01 LENOVO TP-79    00001020 INTL 20050513)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00018150c8]    TEXT DATA BSS ==> [0001000000 - 00018150c8]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [0001816000 - 000181d138]              BRK ==> [0001816000 - 000181d138]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Scan SMP from c0000000 for 1024 bytes.
[    0.000000] Scan SMP from c009fc00 for 1024 bytes.
[    0.000000] Scan SMP from c00f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [c00f68e0] f68e0
[    0.000000]   mpc: 9f5a1-9f6b5
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f6e0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f6e0
[    0.000000] On node 0 totalpages: 521851
[    0.000000] free_area_init_node: node 0, pgdat c16f3c20, node_mem_map c181e000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 292324 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c2818000, static data 33436 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517773
[    0.000000] Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 3 [email protected]/eth0,[email protected]/00:30:48:c6:86:26
[    0.000000] kernel profiling enabled (shift: 0)
[    0.000000] debug: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f6e0)
[    0.000000] Memory: 2061020k/2087808k available (4496k kernel code, 25604k reserved, 2686k data, 376k init, 1178504k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc170b000 - 0xc1769000   ( 376 kB)
[    0.000000]       .data : 0xc14643fd - 0xc1703f68   (2686 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14643fd   (4496 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at kernel/rcupdate.c:259 rcu_init+0x2b/0xa0()
[    0.000000] Hardware name: 1951A26
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #7134
[    0.000000] Call Trace:
[    0.000000]  [<c102ec3b>] warn_slowpath_common+0x60/0x77
[    0.000000]  [<c102ec5f>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c171c929>] rcu_init+0x2b/0xa0
[    0.000000]  [<c170b6f3>] start_kernel+0x184/0x2ca
[    0.000000]  [<c170b06a>] __init_begin+0x6a/0x6f
[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1828.477 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] hpet clockevent registered
[    0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3656.95 BogoMIPS (lpj=1828477)
[    0.000999] Security Framework initialized
[    0.000999] SELinux:  Initializing.
[    0.000999] SELinux:  Starting in permissive mode
[    0.000999] Mount-cache hash table entries: 512
[    0.000999] Initializing cgroup subsys ns
[    0.000999] Initializing cgroup subsys cpuacct
[    0.001013] Initializing cgroup subsys freezer
[    0.001119] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001249] CPU: L2 cache: 2048K
[    0.001336] CPU: Physical Processor ID: 0
[    0.001422] CPU: Processor Core ID: 0
[    0.001510] mce: CPU supports 6 MCE banks
[    0.001605] CPU0: Thermal monitoring enabled (TM2)
[    0.001694] using mwait in idle threads.
[    0.001786] Performance Counters: no PMU driver, software counters only.
[    0.002005] Checking 'hlt' instruction... OK.
[    0.006584] ACPI: Core revision 20090521
[    0.027076] enabled ExtINT on CPU#0
[    0.028075] ENABLING IO-APIC IRQs
[    0.028161] init IO_APIC IRQs
[    0.028246]  1-0 (apicid-pin) not connected
[    0.028377] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.028508] IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.028640] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[    0.028772] IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.028904] IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
[    0.029001] IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.029132] IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.029264] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.029397] IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
[    0.029528] IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.029659] IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
[    0.029791] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.029923] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.030000] IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.030131] IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.030261]  1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected
[    0.030875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.041069] CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.041248] Using local APIC timer interrupts.
[    0.041250] calibrating APIC timer ...
[    0.041993] ... lapic delta = 1039050
[    0.041993] ... PM-Timer delta = 357950
[    0.041993] ... PM-Timer result ok
[    0.041993] ..... delta 1039050
[    0.041993] ..... mult: 44633642
[    0.041993] ..... calibration result: 166248
[    0.041993] ..... CPU clock speed is 1828.0727 MHz.
[    0.041993] ..... host bus clock speed is 166.0248 MHz.
[    0.041993] calling  migration_init+0x0/0x47 @ 1
[    0.041993] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
[    0.041993] calling  spawn_ksoftirqd+0x0/0x47 @ 1
[    0.041993] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs
[    0.041993] calling  init_call_single_data+0x0/0x6d @ 1
[    0.041993] initcall init_call_single_data+0x0/0x6d returned 0 after 0 usecs
[    0.041993] calling  relay_init+0x0/0x11 @ 1
[    0.041993] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
[    0.041993] calling  tracer_alloc_buffers+0x0/0x12d @ 1
[    0.041993] initcall tracer_alloc_buffers+0x0/0x12d returned 0 after 0 usecs
[    0.041998] calling  init_trace_printk+0x0/0xf @ 1
[    0.042087] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[    0.042253] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] masked ExtINT on CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 3657.34 BogoMIPS (lpj=1828674)
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] mce: CPU supports 6 MCE banks
[    0.000999] CPU1: Thermal monitoring enabled (TM2)
[    0.113434] CPU1: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.114126] checking TSC synchronization [CPU#0 -> CPU#1]:
[    0.114982] Measured 579865 cycles TSC warp between CPUs, turning off TSC clock.
[    0.114982] Marking TSC unstable due to check_tsc_sync_source failed
[    0.115008] Brought up 2 CPUs
[    0.115095] Total of 2 processors activated (7314.30 BogoMIPS).
[    0.116092] khelper used greatest stack depth: 6944 bytes left
[    0.116167] calling  init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[    0.116167] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[    0.116275] calling  net_ns_init+0x0/0xc0 @ 1
[    0.116384] initcall net_ns_init+0x0/0xc0 returned 0 after 0 usecs
[    0.116384] calling  e820_mark_nvs_memory+0x0/0x37 @ 1
[    0.116989] initcall e820_mark_nvs_memory+0x0/0x37 returned 0 after 0 usecs
[    0.117084] calling  cpufreq_tsc+0x0/0x25 @ 1
[    0.117172] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[    0.117265] calling  pci_reboot_init+0x0/0x11 @ 1
[    0.117355] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.117447] calling  reboot_init+0x0/0x11 @ 1
[    0.117540] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.117633] calling  init_lapic_sysfs+0x0/0x28 @ 1
[    0.117730] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
[    0.117989] calling  init_smp_flush+0x0/0x20 @ 1
[    0.118078] initcall init_smp_flush+0x0/0x20 returned 0 after 0 usecs
[    0.118172] calling  alloc_frozen_cpus+0x0/0x9 @ 1
[    0.118262] initcall alloc_frozen_cpus+0x0/0x9 returned 0 after 0 usecs
[    0.118355] calling  sysctl_init+0x0/0x29 @ 1
[    0.118584] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs
[    0.118676] calling  ksysfs_init+0x0/0x96 @ 1
[    0.118773] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs
[    0.118865] calling  async_init+0x0/0x3c @ 1
[    0.118954] initcall async_init+0x0/0x3c returned 0 after 0 usecs
[    0.118986] calling  init_jiffies_clocksource+0x0/0xf @ 1
[    0.119078] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[    0.119206] calling  pm_init+0x0/0x2d @ 1
[    0.119299] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[    0.119389] calling  pm_disk_init+0x0/0x14 @ 1
[    0.119480] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[    0.119573] calling  swsusp_header_init+0x0/0x26 @ 1
[    0.119663] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs
[    0.119756] calling  init_hw_breakpoint+0x0/0xf @ 1
[    0.119848] initcall init_hw_breakpoint+0x0/0xf returned 0 after 0 usecs
[    0.119986] calling  filelock_init+0x0/0x27 @ 1
[    0.120075] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[    0.120167] calling  init_misc_binfmt+0x0/0x35 @ 1
[    0.120259] initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs
[    0.120351] calling  init_script_binfmt+0x0/0x11 @ 1
[    0.120442] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.120534] calling  init_elf_binfmt+0x0/0x11 @ 1
[    0.120623] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.120716] calling  debugfs_init+0x0/0x4a @ 1
[    0.120808] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.120901] calling  random32_init+0x0/0xa4 @ 1
[    0.120985] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
[    0.121079] calling  early_resume_init+0x0/0x183 @ 1
[    0.121985] Time: 11:05:10  Date: 08/09/09
[    0.122072] initcall early_resume_init+0x0/0x183 returned 0 after 976 usecs
[    0.122164] calling  cpufreq_core_init+0x0/0x59 @ 1
[    0.122253] initcall cpufreq_core_init+0x0/0x59 returned 0 after 0 usecs
[    0.122345] calling  cpuidle_init+0x0/0x32 @ 1
[    0.122437] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[    0.122529] calling  sock_init+0x0/0x51 @ 1
[    0.122662] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[    0.122754] calling  net_inuse_init+0x0/0x1f @ 1
[    0.122845] initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs
[    0.122937] calling  netpoll_init+0x0/0x11 @ 1
[    0.122985] initcall netpoll_init+0x0/0x11 returned 0 after 0 usecs
[    0.123077] calling  netlink_proto_init+0x0/0x102 @ 1
[    0.123170] NET: Registered protocol family 16
[    0.123269] initcall netlink_proto_init+0x0/0x102 returned 0 after 0 usecs
[    0.123362] calling  bdi_class_init+0x0/0x35 @ 1
[    0.123464] initcall bdi_class_init+0x0/0x35 returned 0 after 0 usecs
[    0.123464] calling  kobject_uevent_init+0x0/0x4e @ 1
[    0.123464] initcall kobject_uevent_init+0x0/0x4e returned 0 after 0 usecs
[    0.123464] calling  pcibus_class_init+0x0/0x14 @ 1
[    0.123464] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
[    0.123992] calling  pci_driver_init+0x0/0xf @ 1
[    0.124091] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[    0.124091] calling  backlight_class_init+0x0/0x4d @ 1
[    0.124182] initcall backlight_class_init+0x0/0x4d returned 0 after 0 usecs
[    0.124182] calling  video_output_class_init+0x0/0x14 @ 1
[    0.124182] initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
[    0.124182] calling  tty_class_init+0x0/0x28 @ 1
[    0.124212] initcall tty_class_init+0x0/0x28 returned 0 after 0 usecs
[    0.124987] calling  vtconsole_class_init+0x0/0xa1 @ 1
[    0.125087] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs
[    0.125087] calling  i2c_init+0x0/0x54 @ 1
[    0.125177] initcall i2c_init+0x0/0x54 returned 0 after 0 usecs
[    0.125177] calling  amd_postcore_init+0x0/0x66 @ 1
[    0.125177] initcall amd_postcore_init+0x0/0x66 returned 0 after 0 usecs
[    0.125260] calling  arch_kdebugfs_init+0x0/0x261 @ 1
[    0.125361] initcall arch_kdebugfs_init+0x0/0x261 returned 0 after 0 usecs
[    0.125986] calling  init_pit_clocksource+0x0/0x94 @ 1
[    0.126077] initcall init_pit_clocksource+0x0/0x94 returned 0 after 0 usecs
[    0.126170] calling  mtrr_if_init+0x0/0x44 @ 1
[    0.126261] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[    0.126353] calling  ffh_cstate_init+0x0/0x27 @ 1
[    0.126442] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs
[    0.126535] calling  kdump_buf_page_init+0x0/0x54 @ 1
[    0.126626] initcall kdump_buf_page_init+0x0/0x54 returned 0 after 0 usecs
[    0.126719] calling  acpi_pci_init+0x0/0x4c @ 1
[    0.126807] ACPI: bus type pci registered
[    0.126895] initcall acpi_pci_init+0x0/0x4c returned 0 after 0 usecs
[    0.126983] calling  dmi_id_init+0x0/0x28f @ 1
[    0.127083] initcall dmi_id_init+0x0/0x28f returned 0 after 0 usecs
[    0.127083] calling  pci_arch_init+0x0/0x53 @ 1
[    0.127190] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.127283] PCI: MCFG area at f0000000 reserved in E820
[    0.127372] PCI: Using MMCONFIG for extended config space
[    0.127461] PCI: Using configuration type 1 for base access
[    0.127560] initcall pci_arch_init+0x0/0x53 returned 0 after 0 usecs
[    0.127653] calling  topology_init+0x0/0x36 @ 1
[    0.128010] initcall topology_init+0x0/0x36 returned 0 after 976 usecs
[    0.128103] calling  mtrr_init_finialize+0x0/0x35 @ 1
[    0.128193] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[    0.128287] calling  param_sysfs_init+0x0/0x1a6 @ 1
[    0.138109] initcall param_sysfs_init+0x0/0x1a6 returned 0 after 9764 usecs
[    0.138109] calling  pm_sysrq_init+0x0/0x16 @ 1
[    0.138195] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[    0.138287] calling  audit_watch_init+0x0/0x27 @ 1
[    0.138376] initcall audit_watch_init+0x0/0x27 returned 0 after 0 usecs
[    0.138469] calling  default_bdi_init+0x0/0x2f @ 1
[    0.138584] initcall default_bdi_init+0x0/0x2f returned 0 after 0 usecs
[    0.138584] calling  init_bio+0x0/0xc0 @ 1
[    0.139024] bio: create slab <bio-0> at 0
[    0.139118] initcall init_bio+0x0/0xc0 returned 0 after 0 usecs
[    0.139210] calling  fsnotify_init+0x0/0xf @ 1
[    0.139300] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
[    0.139392] calling  fsnotify_notification_init+0x0/0x5b @ 1
[    0.139485] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs
[    0.139615] calling  cryptomgr_init+0x0/0xf @ 1
[    0.139704] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[    0.139795] calling  blk_settings_init+0x0/0x1d @ 1
[    0.139885] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[    0.140016] calling  blk_ioc_init+0x0/0x24 @ 1
[    0.140106] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[    0.140198] calling  blk_softirq_init+0x0/0x5b @ 1
[    0.140288] initcall blk_softirq_init+0x0/0x5b returned 0 after 0 usecs
[    0.140379] calling  genhd_device_init+0x0/0x50 @ 1
[    0.140516] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[    0.140516] calling  pci_slot_init+0x0/0x3b @ 1
[    0.140516] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[    0.140516] calling  fbmem_init+0x0/0x78 @ 1
[    0.140516] initcall fbmem_init+0x0/0x78 returned 0 after 0 usecs
[    0.141018] calling  acpi_init+0x0/0x25e @ 1
[    0.142435] ACPI: EC: EC description table is found, configuring boot EC
[    0.150150] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.156229] ACPI: Interpreter enabled
[    0.156318] ACPI: (supports S0 S3 S4 S5)
[    0.156596] ACPI: Using IOAPIC for interrupt routing
[    0.173122] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.173215] ACPI: EC: driver started in interrupt mode
[    0.173323] ACPI: Power Resource [PUBS] (on)
[    0.174221] initcall acpi_init+0x0/0x25e returned 0 after 32221 usecs
[    0.174314] calling  dock_init+0x0/0x7d @ 1
[    0.177366] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[    0.177460] initcall dock_init+0x0/0x7d returned 0 after 2929 usecs
[    0.177553] calling  acpi_pci_root_init+0x0/0x25 @ 1
[    0.177668] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.177785] pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff]
[    0.177979] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[    0.178072] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[    0.178166] pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff]
[    0.178296] pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff]
[    0.178500] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff]
[    0.178650] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.178743] pci 0000:00:1b.0: PME# disabled
[    0.178913] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.178978] pci 0000:00:1c.0: PME# disabled
[    0.179149] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.179243] pci 0000:00:1c.1: PME# disabled
[    0.179414] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.179508] pci 0000:00:1c.2: PME# disabled
[    0.179678] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.179771] pci 0000:00:1c.3: PME# disabled
[    0.179919] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.180039] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.180191] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.180342] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.180498] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff]
[    0.180649] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.180744] pci 0000:00:1d.7: PME# disabled
[    0.181077] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.181209] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.181303] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.181435] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.181567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.181748] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.181843] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.181939] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.181980] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.182075] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[    0.182227] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
[    0.182323] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
[    0.182419] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
[    0.182514] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
[    0.182610] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[    0.182705] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff]
[    0.182833] pci 0000:00:1f.2: PME# supported from D3hot
[    0.182977] pci 0000:00:1f.2: PME# disabled
[    0.183126] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[    0.183388] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff]
[    0.183563] pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f]
[    0.183819] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.183977] pci 0000:02:00.0: PME# disabled
[    0.184201] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.184295] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
[    0.184575] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
[    0.184946] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.185025] pci 0000:03:00.0: PME# disabled
[    0.185254] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
[    0.185348] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
[    0.185446] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
[    0.185596] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
[    0.185690] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
[    0.185789] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
[    0.186016] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff]
[    0.186109] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
[    0.186206] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
[    0.186352] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
[    0.186471] pci 0000:15:00.0: supports D1 D2
[    0.186558] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186653] pci 0000:15:00.0: PME# disabled
[    0.186808] pci 0000:00:1e.0: transparent bridge
[    0.186898] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff]
[    0.186980] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
[    0.187845] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
[    0.188012] pci_bus 0000:00: on NUMA node 0
[    0.188103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.188345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[    0.188515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.188683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.188857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.189037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.194071] initcall acpi_pci_root_init+0x0/0x25 returned 0 after 16599 usecs
[    0.194071] calling  acpi_pci_link_init+0x0/0x3f @ 1
[    0.194320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.195402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.196167] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.196895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.197608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.198349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.199103] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.199834] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.200436] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 5858 usecs
[    0.200436] calling  pnp_init+0x0/0xf @ 1
[    0.200436] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[    0.200436] calling  misc_init+0x0/0x92 @ 1
[    0.200436] initcall misc_init+0x0/0x92 returned 0 after 0 usecs
[    0.200979] calling  cn_init+0x0/0xcb @ 1
[    0.201078] initcall cn_init+0x0/0xcb returned 0 after 0 usecs
[    0.201170] calling  init_scsi+0x0/0x84 @ 1
[    0.201338] SCSI subsystem initialized
[    0.201338] initcall init_scsi+0x0/0x84 returned 0 after 0 usecs
[    0.201338] calling  ata_init+0x0/0x29d @ 1
[    0.201338] libata version 3.00 loaded.
[    0.201338] initcall ata_init+0x0/0x29d returned 0 after 0 usecs
[    0.201975] calling  phy_init+0x0/0x29 @ 1
[    0.202074] initcall phy_init+0x0/0x29 returned 0 after 0 usecs
[    0.202074] calling  init_pcmcia_cs+0x0/0x1e @ 1
[    0.202163] initcall init_pcmcia_cs+0x0/0x1e returned 0 after 0 usecs
[    0.202163] calling  usb_init+0x0/0x177 @ 1
[    0.202177] usbcore: registered new interface driver usbfs
[    0.202177] usbcore: registered new interface driver hub
[    0.203006] usbcore: registered new device driver usb
[    0.203063] initcall usb_init+0x0/0x177 returned 0 after 976 usecs
[    0.203155] calling  serio_init+0x0/0x82 @ 1
[    0.203252] initcall serio_init+0x0/0x82 returned 0 after 0 usecs
[    0.203252] calling  input_init+0x0/0xfb @ 1
[    0.203252] initcall input_init+0x0/0xfb returned 0 after 0 usecs
[    0.203252] calling  rtc_init+0x0/0x5e @ 1
[    0.203252] initcall rtc_init+0x0/0x5e returned 0 after 0 usecs
[    0.203973] calling  power_supply_class_init+0x0/0x2b @ 1
[    0.204074] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs
[    0.204101] calling  hwmon_init+0x0/0xe9 @ 1
[    0.204202] initcall hwmon_init+0x0/0xe9 returned 0 after 0 usecs
[    0.204202] calling  thermal_init+0x0/0x32 @ 1
[    0.204202] initcall thermal_init+0x0/0x32 returned 0 after 0 usecs
[    0.204202] calling  md_init+0x0/0xb5 @ 1
[    0.204202] initcall md_init+0x0/0xb5 returned 0 after 0 usecs
[    0.204252] calling  leds_init+0x0/0x32 @ 1
[    0.204983] initcall leds_init+0x0/0x32 returned 0 after 0 usecs
[    0.205065] calling  pci_subsys_init+0x0/0xdf @ 1
[    0.205153] PCI: Using ACPI for IRQ routing
[    0.205553] initcall pci_subsys_init+0x0/0xdf returned 0 after 0 usecs
[    0.205646] calling  proto_init+0x0/0xf @ 1
[    0.205736] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[    0.205827] calling  net_dev_init+0x0/0x142 @ 1
[    0.206028] initcall net_dev_init+0x0/0x142 returned 0 after 0 usecs
[    0.206075] calling  neigh_init+0x0/0x66 @ 1
[    0.206164] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[    0.206256] calling  fib_rules_init+0x0/0x99 @ 1
[    0.206346] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[    0.206439] calling  pktsched_init+0x0/0xa9 @ 1
[    0.206530] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs
[    0.206622] calling  tc_filter_init+0x0/0x43 @ 1
[    0.206712] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[    0.206804] calling  tc_action_init+0x0/0x43 @ 1
[    0.206972] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
[    0.207065] calling  genl_init+0x0/0xb0 @ 1
[    0.208976] initcall genl_init+0x0/0xb0 returned 0 after 1952 usecs
[    0.209068] calling  cipso_v4_init+0x0/0x52 @ 1
[    0.209159] initcall cipso_v4_init+0x0/0x52 returned 0 after 0 usecs
[    0.209250] calling  wireless_nlevent_init+0x0/0x2f @ 1
[    0.209341] initcall wireless_nlevent_init+0x0/0x2f returned 0 after 0 usecs
[    0.209436] calling  cfg80211_init+0x0/0x64 @ 1
[    0.219994] cfg80211: Using static regulatory domain info
[    0.220082] cfg80211: Regulatory domain: US
[    0.220169] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.220298] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    0.220391] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220485] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220577] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220669] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.220762] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    0.220858] cfg80211: Calling CRDA for country: US
[    0.220985] initcall cfg80211_init+0x0/0x64 returned 0 after 11716 usecs
[    0.221068] calling  ieee80211_init+0x0/0xa @ 1
[    0.221158] initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs
[    0.221250] calling  netlbl_init+0x0/0x6d @ 1
[    0.221336] NetLabel: Initializing
[    0.221421] NetLabel:  domain hash size = 128
[    0.221508] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.221610] NetLabel:  unlabeled traffic allowed by default
[    0.221702] initcall netlbl_init+0x0/0x6d returned 0 after 0 usecs
[    0.221793] calling  rfkill_init+0x0/0x75 @ 1
[    0.222006] initcall rfkill_init+0x0/0x75 returned 0 after 976 usecs
[    0.222087] calling  sysctl_init+0x0/0x3b @ 1
[    0.222175] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[    0.222267] calling  pci_iommu_init+0x0/0xc @ 1
[    0.222356] initcall pci_iommu_init+0x0/0xc returned 0 after 0 usecs
[    0.222449] calling  print_all_ICs+0x0/0x441 @ 1
[    0.222538] 
[    0.222539] printing PIC contents
[    0.222707] ... PIC  IMR: ffff
[    0.222795] ... PIC  IRR: 0800
[    0.222888] ... PIC  ISR: 0000
[    0.222972] ... PIC ELCR: 0800
[    0.223058] printing local APIC contents on CPU#0/0:
[    0.223146] ... APIC ID:      00000000 (0)
[    0.223233] ... APIC VERSION: 00050014
[    0.223318] ... APIC TASKPRI: 00000000 (00)
[    0.223406] ... APIC PROCPRI: 00000000
[    0.223491] ... APIC LDR: 01000000
[    0.223576] ... APIC DFR: ffffffff
[    0.223661] ... APIC SPIV: 000001ff
[    0.223747] ... APIC ISR field:
[    0.223832] 0000000000000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC TMR field:
[    0.223965] 0000000002000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC IRR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000008000
[    0.223965] ... APIC ESR: 00000000
[    0.223965] ... APIC ICR: 000008fb
[    0.223965] ... APIC ICR2: 02000000
[    0.223965] ... APIC LVTT: 000200ef
[    0.223965] ... APIC LVTPC: 00010000
[    0.223965] ... APIC LVT0: 00010700
[    0.223965] ... APIC LVT1: 00000400
[    0.223965] ... APIC LVTERR: 000000fe
[    0.223965] ... APIC TMICT: 00002896
[    0.223965] ... APIC TMCCT: 000021a7
[    0.223965] ... APIC TDCR: 00000003
[    0.223965] 
[    0.223577] printing local APIC contents on CPU#1/1:
[    0.223668] ... APIC ID:      01000000 (1)
[    0.223754] ... APIC VERSION: 00050014
[    0.223840] ... APIC TASKPRI: 00000000 (00)
[    0.223928] ... APIC PROCPRI: 00000000
[    0.223965] ... APIC LDR: 02000000
[    0.223965] ... APIC DFR: ffffffff
[    0.223965] ... APIC SPIV: 000001ff
[    0.223965] ... APIC ISR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC TMR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000000000
[    0.223965] ... APIC IRR field:
[    0.223965] 0000000000000000000000000000000000000000000000000000000000008000
[    0.223965] ... APIC ESR: 00000000
[    0.223965] ... APIC ICR: 000008fd
[    0.223965] ... APIC ICR2: 01000000
[    0.223965] ... APIC LVTT: 000200ef
[    0.223965] ... APIC LVTPC: 00010000
[    0.223965] ... APIC LVT0: 00010700
[    0.223965] ... APIC LVT1: 00010400
[    0.223965] ... APIC LVTERR: 000000fe
[    0.223965] ... APIC TMICT: 00002896
[    0.223965] ... APIC TMCCT: 00000f04
[    0.223965] ... APIC TDCR: 00000003
[    0.223965] 
[    0.227664] number of MP IRQ sources: 15.
[    0.227752] number of IO-APIC #1 registers: 24.
[    0.227839] testing the IO APIC.......................
[    0.227933] 
[    0.227967] IO APIC #1......
[    0.228050] .... register #00: 02000000
[    0.228136] .......    : physical APIC id: 02
[    0.228223] .......    : Delivery Type: 0
[    0.228309] .......    : LTS          : 0
[    0.228396] .... register #01: 00170020
[    0.228482] .......     : max redirection entries: 0017
[    0.228570] .......     : PRQ implemented: 0
[    0.228656] .......     : IO APIC version: 0020
[    0.228743] .... IRQ redirection table:
[    0.228966]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
[    0.229059]  00 000 1    0    0   0   0    0    0    00
[    0.229195]  01 003 0    0    0   0   0    1    1    31
[    0.229970]  02 003 0    0    0   0   0    1    1    30
[    0.230105]  03 003 0    0    0   0   0    1    1    33
[    0.230241]  04 003 0    0    0   0   0    1    1    34
[    0.230377]  05 003 0    0    0   0   0    1    1    35
[    0.230514]  06 003 0    0    0   0   0    1    1    36
[    0.230650]  07 003 0    0    0   0   0    1    1    37
[    0.230787]  08 003 0    0    0   0   0    1    1    38
[    0.230967]  09 003 0    1    0   0   0    1    1    39
[    0.231103]  0a 003 0    0    0   0   0    1    1    3A
[    0.231239]  0b 003 0    0    0   0   0    1    1    3B
[    0.231375]  0c 003 0    0    0   0   0    1    1    3C
[    0.231511]  0d 003 0    0    0   0   0    1    1    3D
[    0.231646]  0e 003 0    0    0   0   0    1    1    3E
[    0.231782]  0f 003 0    0    0   0   0    1    1    3F
[    0.231918]  10 000 1    0    0   0   0    0    0    00
[    0.232055]  11 000 1    0    0   0   0    0    0    00
[    0.232192]  12 000 1    0    0   0   0    0    0    00
[    0.232329]  13 000 1    0    0   0   0    0    0    00
[    0.232465]  14 000 1    0    0   0   0    0    0    00
[    0.232602]  15 000 1    0    0   0   0    0    0    00
[    0.232737]  16 000 1    0    0   0   0    0    0    00
[    0.232873]  17 000 1    0    0   0   0    0    0    00
[    0.232966] IRQ to pin mappings:
[    0.233051] IRQ0 -> 0:2
[    0.233219] IRQ1 -> 0:1
[    0.233389] IRQ3 -> 0:3
[    0.233559] IRQ4 -> 0:4
[    0.233729] IRQ5 -> 0:5
[    0.233897] IRQ6 -> 0:6
[    0.234088] IRQ7 -> 0:7
[    0.234258] IRQ8 -> 0:8
[    0.234426] IRQ9 -> 0:9
[    0.234596] IRQ10 -> 0:10
[    0.234765] IRQ11 -> 0:11
[    0.234933] IRQ12 -> 0:12
[    0.235087] IRQ13 -> 0:13
[    0.235256] IRQ14 -> 0:14
[    0.235426] IRQ15 -> 0:15
[    0.235599] .................................... done.
[    0.235690] initcall print_all_ICs+0x0/0x441 returned 0 after 12693 usecs
[    0.235783] calling  hpet_late_init+0x0/0x183 @ 1
[    0.235877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236179] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.238971] initcall hpet_late_init+0x0/0x183 returned 0 after 3905 usecs
[    0.239062] calling  clocksource_done_booting+0x0/0x11 @ 1
[    0.239968] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs
[    0.240097] calling  rb_init_debugfs+0x0/0x27 @ 1
[    0.240191] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs
[    0.240283] calling  tracer_init_debugfs+0x0/0x26b @ 1
[    0.240459] initcall tracer_init_debugfs+0x0/0x26b returned 0 after 0 usecs
[    0.240553] calling  init_trace_printk_function_export+0x0/0x2a @ 1
[    0.240647] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs
[    0.240776] calling  event_trace_init+0x0/0x17e @ 1
[    0.240979] Switched to high resolution mode on CPU 0
[    0.241783] Switched to high resolution mode on CPU 1
[    0.242167] initcall event_trace_init+0x0/0x17e returned 0 after 2148 usecs
[    0.242265] calling  init_pipe_fs+0x0/0x41 @ 1
[    0.242366] initcall init_pipe_fs+0x0/0x41 returned 0 after 11 usecs
[    0.242459] calling  eventpoll_init+0x0/0xac @ 1
[    0.242554] initcall eventpoll_init+0x0/0xac returned 0 after 5 usecs
[    0.242647] calling  anon_inode_init+0x0/0xed @ 1
[    0.242744] initcall anon_inode_init+0x0/0xed returned 0 after 6 usecs
[    0.242836] calling  blk_scsi_ioctl_init+0x0/0x288 @ 1
[    0.242929] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 1 usecs
[    0.243031] calling  acpi_event_init+0x0/0x6f @ 1
[    0.246021] initcall acpi_event_init+0x0/0x6f returned 0 after 2830 usecs
[    0.246114] calling  pnpacpi_init+0x0/0x7b @ 1
[    0.246202] pnp: PnP ACPI init
[    0.246298] ACPI: bus type pnp registered
[    0.248505] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.248733] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.248956] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.249185] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.250518] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[    0.253081] pnp: PnP ACPI: found 11 devices
[    0.253168] ACPI: ACPI bus type pnp unregistered
[    0.253266] initcall pnpacpi_init+0x0/0x7b returned 0 after 6895 usecs
[    0.253359] calling  pnp_system_init+0x0/0xf @ 1
[    0.253456] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.253548] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[    0.253641] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[    0.253735] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[    0.253828] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[    0.253921] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[    0.254025] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[    0.254118] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[    0.254211] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[    0.254313] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[    0.254406] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[    0.254499] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.254592] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
[    0.254723] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.254859] system 00:02: ioport range 0x164e-0x164f has been reserved
[    0.254952] system 00:02: ioport range 0x1000-0x107f has been reserved
[    0.255050] system 00:02: ioport range 0x1180-0x11bf has been reserved
[    0.255143] system 00:02: ioport range 0x800-0x80f has been reserved
[    0.255235] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[    0.255334] system 00:02: ioport range 0x1600-0x165f could not be reserved
[    0.255428] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.255522] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.255616] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.255710] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.255804] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.255954] initcall pnp_system_init+0x0/0xf returned 0 after 2446 usecs
[    0.256056] calling  chr_dev_init+0x0/0x8d @ 1
[    0.256797] initcall chr_dev_init+0x0/0x8d returned 0 after 636 usecs
[    0.256891] calling  firmware_class_init+0x0/0x61 @ 1
[    0.257046] initcall firmware_class_init+0x0/0x61 returned 0 after 62 usecs
[    0.257140] calling  init_pcmcia_bus+0x0/0x62 @ 1
[    0.257308] initcall init_pcmcia_bus+0x0/0x62 returned 0 after 75 usecs
[    0.257402] calling  cpufreq_gov_performance_init+0x0/0xf @ 1
[    0.257497] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 1 usecs
[    0.257625] calling  cpufreq_gov_userspace_init+0x0/0xf @ 1
[    0.257719] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs
[    0.257849] calling  init_acpi_pm_clocksource+0x0/0x1b5 @ 1
[    0.292492] initcall init_acpi_pm_clocksource+0x0/0x1b5 returned 0 after 33741 usecs
[    0.292622] calling  pcibios_assign_resources+0x0/0x66 @ 1
[    0.292785] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.292876] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.292970] pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
[    0.293076] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.293169] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.293267] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
[    0.293360] pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
[    0.293453] pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
[    0.293588] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.293679] pci 0000:00:1c.2:   IO window: 0x5000-0x6fff
[    0.293773] pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
[    0.293866] pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
[    0.294009] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
[    0.294100] pci 0000:00:1c.3:   IO window: 0x7000-0x8fff
[    0.294194] pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
[    0.294293] pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
[    0.294431] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[    0.294524] pci 0000:15:00.0:   IO window: 0x009000-0x0090ff
[    0.294618] pci 0000:15:00.0:   IO window: 0x009400-0x0094ff
[    0.294712] pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
[    0.294807] pci 0000:15:00.0:   MEM window: 0x80000000-0x83ffffff
[    0.294902] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[    0.294994] pci 0000:00:1e.0:   IO window: 0x9000-0xcfff
[    0.295094] pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
[    0.295188] pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
[    0.295338]   alloc irq_desc for 20 on node -1
[    0.295425]   alloc kstat_irqs on node -1
[    0.295514] IOAPIC[0]: Set routing entry (1-20 -> 0x49 -> IRQ 20 Mode:1 Active:1)
[    0.295645] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.295741] pci 0000:00:1c.0: setting latency timer to 64
[    0.295836]   alloc irq_desc for 21 on node -1
[    0.295923]   alloc kstat_irqs on node -1
[    0.296019] IOAPIC[0]: Set routing entry (1-21 -> 0x51 -> IRQ 21 Mode:1 Active:1)
[    0.296149] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.296243] pci 0000:00:1c.1: setting latency timer to 64
[    0.296347]   alloc irq_desc for 22 on node -1
[    0.296435]   alloc kstat_irqs on node -1
[    0.296522] IOAPIC[0]: Set routing entry (1-22 -> 0x59 -> IRQ 22 Mode:1 Active:1)
[    0.296651] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.296747] pci 0000:00:1c.2: setting latency timer to 64
[    0.296843]   alloc irq_desc for 23 on node -1
[    0.297013]   alloc kstat_irqs on node -1
[    0.297803] IOAPIC[0]: Set routing entry (1-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
[    0.297933] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.298033] pci 0000:00:1c.3: setting latency timer to 64
[    0.298126] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[    0.298219] pci 0000:00:1e.0: setting latency timer to 64
[    0.298326]   alloc irq_desc for 16 on node -1
[    0.298413]   alloc kstat_irqs on node -1
[    0.298501] IOAPIC[0]: Set routing entry (1-16 -> 0x69 -> IRQ 16 Mode:1 Active:1)
[    0.298631] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.298729] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.298819] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.298910] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.299000] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff]
[    0.299099] pci_bus 0000:03: resource 0 io:  [0x3000-0x4fff]
[    0.299189] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
[    0.299287] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff]
[    0.299380] pci_bus 0000:04: resource 0 io:  [0x5000-0x6fff]
[    0.299471] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
[    0.299563] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff]
[    0.299655] pci_bus 0000:0c: resource 0 io:  [0x7000-0x8fff]
[    0.299745] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
[    0.299837] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff]
[    0.299929] pci_bus 0000:15: resource 0 io:  [0x9000-0xcfff]
[    0.300026] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
[    0.300117] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff]
[    0.300210] pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
[    0.300309] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
[    0.300400] pci_bus 0000:16: resource 0 io:  [0x9000-0x90ff]
[    0.300491] pci_bus 0000:16: resource 1 io:  [0x9400-0x94ff]
[    0.300581] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff]
[    0.300673] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff]
[    0.300767] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 7864 usecs
[    0.300897] calling  sysctl_core_init+0x0/0x2d @ 1
[    0.301023] initcall sysctl_core_init+0x0/0x2d returned 0 after 33 usecs
[    0.301115] calling  inet_init+0x0/0x1c3 @ 1
[    0.301213] NET: Registered protocol family 2
[    0.301404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.301831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.302659] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.303110] TCP: Hash tables configured (established 131072 bind 65536)
[    0.303202] TCP reno registered
[    0.303404] initcall inet_init+0x0/0x1c3 returned 0 after 2142 usecs
[    0.303499] calling  af_unix_init+0x0/0x47 @ 1
[    0.303589] NET: Registered protocol family 1
[    0.303688] initcall af_unix_init+0x0/0x47 returned 0 after 97 usecs
[    0.303781] calling  populate_rootfs+0x0/0x1ea @ 1
[    0.303938] initcall populate_rootfs+0x0/0x1ea returned 0 after 63 usecs
[    0.304045] calling  i8259A_init_sysfs+0x0/0x1d @ 1
[    0.304311] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 169 usecs
[    0.304404] calling  sbf_init+0x0/0xc0 @ 1
[    0.304495] Simple Boot Flag at 0x35 set to 0x1
[    0.304589] initcall sbf_init+0x0/0xc0 returned 0 after 93 usecs
[    0.304681] calling  i8237A_init_sysfs+0x0/0x1d @ 1
[    0.304886] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 111 usecs
[    0.304980] calling  add_rtc_cmos+0x0/0x7e @ 1
[    0.305095] initcall add_rtc_cmos+0x0/0x7e returned 0 after 5 usecs
[    0.305188] calling  cache_sysfs_init+0x0/0x4b @ 1
[    0.305753] initcall cache_sysfs_init+0x0/0x4b returned 0 after 457 usecs
[    0.305847] calling  mce_init_device+0x0/0xc1 @ 1
[    0.306201] initcall mce_init_device+0x0/0xc1 returned 0 after 257 usecs
[    0.306305] calling  threshold_init_device+0x0/0x3a @ 1
[    0.306398] initcall threshold_init_device+0x0/0x3a returned 0 after 1 usecs
[    0.306492] calling  thermal_throttle_init_device+0x0/0x77 @ 1
[    0.306590] initcall thermal_throttle_init_device+0x0/0x77 returned 0 after 5 usecs
[    0.306720] calling  msr_init+0x0/0xda @ 1
[    0.307020] initcall msr_init+0x0/0xda returned 0 after 189 usecs
[    0.307111] calling  cpuid_init+0x0/0xda @ 1
[    0.307389] initcall cpuid_init+0x0/0xda returned 0 after 181 usecs
[    0.307482] calling  ioapic_init_sysfs+0x0/0x84 @ 1
[    0.307679] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 104 usecs
[    0.307772] calling  add_pcspkr+0x0/0x24 @ 1
[    0.307929] initcall add_pcspkr+0x0/0x24 returned 0 after 65 usecs
[    0.308034] calling  microcode_init+0x0/0xf2 @ 1
[    0.308192] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
[    0.308297] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
[    0.308450] Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    0.308583] initcall microcode_init+0x0/0xf2 returned 0 after 447 usecs
[    0.308678] calling  start_periodic_check_for_corruption+0x0/0x32 @ 1
[    0.308770] Scanning for low memory corruption every 60 seconds
[    0.308864] initcall start_periodic_check_for_corruption+0x0/0x32 returned 0 after 91 usecs
[    0.308996] calling  aes_init+0x0/0xf @ 1
[    0.309202] initcall aes_init+0x0/0xf returned 0 after 90 usecs
[    0.309304] calling  proc_schedstat_init+0x0/0x1c @ 1
[    0.309401] initcall proc_schedstat_init+0x0/0x1c returned 0 after 6 usecs
[    0.309495] calling  proc_execdomains_init+0x0/0x1c @ 1
[    0.309588] initcall proc_execdomains_init+0x0/0x1c returned 0 after 2 usecs
[    0.309681] calling  ioresources_init+0x0/0x2d @ 1
[    0.309775] initcall ioresources_init+0x0/0x2d returned 0 after 3 usecs
[    0.309867] calling  uid_cache_init+0x0/0x5b @ 1
[    0.309963] initcall uid_cache_init+0x0/0x5b returned 0 after 5 usecs
[    0.310078] calling  init_posix_timers+0x0/0xb3 @ 1
[    0.310174] initcall init_posix_timers+0x0/0xb3 returned 0 after 5 usecs
[    0.310274] calling  init_posix_cpu_timers+0x0/0xba @ 1
[    0.310367] initcall init_posix_cpu_timers+0x0/0xba returned 0 after 1 usecs
[    0.310460] calling  nsproxy_cache_init+0x0/0x27 @ 1
[    0.310553] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 1 usecs
[    0.310647] calling  create_proc_profile+0x0/0x16f @ 1
[    0.310749] initcall create_proc_profile+0x0/0x16f returned 0 after 9 usecs
[    0.310843] calling  timekeeping_init_device+0x0/0x1d @ 1
[    0.311038] initcall timekeeping_init_device+0x0/0x1d returned 0 after 100 usecs
[    0.311170] calling  init_clocksource_sysfs+0x0/0x43 @ 1
[    0.311377] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 106 usecs
[    0.311508] calling  init_timer_list_procfs+0x0/0x27 @ 1
[    0.311602] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 2 usecs
[    0.311695] calling  init_tstats_procfs+0x0/0x27 @ 1
[    0.311789] initcall init_tstats_procfs+0x0/0x27 returned 0 after 2 usecs
[    0.311881] calling  futex_init+0x0/0x65 @ 1
[    0.311979] initcall futex_init+0x0/0x65 returned 0 after 8 usecs
[    0.312086] calling  proc_dma_init+0x0/0x1c @ 1
[    0.312179] initcall proc_dma_init+0x0/0x1c returned 0 after 2 usecs
[    0.312277] calling  proc_modules_init+0x0/0x1c @ 1
[    0.312370] initcall proc_modules_init+0x0/0x1c returned 0 after 2 usecs
[    0.312462] calling  kallsyms_init+0x0/0x1f @ 1
[    0.312553] initcall kallsyms_init+0x0/0x1f returned 0 after 2 usecs
[    0.312646] calling  snapshot_device_init+0x0/0xf @ 1
[    0.312801] initcall snapshot_device_init+0x0/0xf returned 0 after 61 usecs
[    0.312895] calling  crash_save_vmcoreinfo_init+0x0/0x348 @ 1
[    0.313023] initcall crash_save_vmcoreinfo_init+0x0/0x348 returned 0 after 34 usecs
[    0.313153] calling  crash_notes_memory_init+0x0/0x31 @ 1
[    0.313247] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 3 usecs
[    0.313384] calling  pid_namespaces_init+0x0/0x27 @ 1
[    0.313477] initcall pid_namespaces_init+0x0/0x27 returned 0 after 2 usecs
[    0.313570] calling  audit_init+0x0/0xd2 @ 1
[    0.313657] audit: initializing netlink socket (disabled)
[    0.313756] type=2000 audit(1249815910.313:1): initialized
[    0.313848] initcall audit_init+0x0/0xd2 returned 0 after 186 usecs
[    0.313941] calling  audit_tree_init+0x0/0x3b @ 1
[    0.314048] initcall audit_tree_init+0x0/0x3b returned 0 after 3 usecs
[    0.314140] calling  init_kprobes+0x0/0x11c @ 1
[    0.324102] initcall init_kprobes+0x0/0x11c returned 0 after 9640 usecs
[    0.324195] calling  utsname_sysctl_init+0x0/0x11 @ 1
[    0.324314] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 22 usecs
[    0.324409] calling  init_markers+0x0/0xf @ 1
[    0.324499] initcall init_markers+0x0/0xf returned 0 after 1 usecs
[    0.324591] calling  init_tracepoints+0x0/0xf @ 1
[    0.324683] initcall init_tracepoints+0x0/0xf returned 0 after 1 usecs
[    0.324774] calling  init_events+0x0/0x5a @ 1
[    0.324867] initcall init_events+0x0/0x5a returned 0 after 2 usecs
[    0.324958] calling  init_sched_switch_trace+0x0/0xf @ 1
[    0.325059] initcall init_sched_switch_trace+0x0/0xf returned 0 after 2 usecs
[    0.325152] calling  init_blk_tracer+0x0/0x4b @ 1
[    0.325243] initcall init_blk_tracer+0x0/0x4b returned 0 after 1 usecs
[    0.325343] calling  perf_counter_sysfs_init+0x0/0x14 @ 1
[    0.325439] initcall perf_counter_sysfs_init+0x0/0x14 returned 0 after 4 usecs
[    0.325569] calling  init_per_zone_wmark_min+0x0/0x59 @ 1
[    0.325746] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 83 usecs
[    0.325877] calling  pdflush_init+0x0/0x20 @ 1
[    0.326037] initcall pdflush_init+0x0/0x20 returned 0 after 68 usecs
[    0.326131] calling  kswapd_init+0x0/0x1d @ 1
[    0.326255] initcall kswapd_init+0x0/0x1d returned 0 after 33 usecs
[    0.326350] calling  init_tmpfs+0x0/0xb9 @ 1
[    0.326466] initcall init_tmpfs+0x0/0xb9 returned 0 after 26 usecs
[    0.326558] calling  setup_vmstat+0x0/0x9a @ 1
[    0.326658] initcall setup_vmstat+0x0/0x9a returned 0 after 9 usecs
[    0.326751] calling  mm_sysfs_init+0x0/0x22 @ 1
[    0.326844] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs
[    0.326936] calling  proc_vmalloc_init+0x0/0x1f @ 1
[    0.327037] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 2 usecs
[    0.327131] calling  init_emergency_pool+0x0/0x57 @ 1
[    0.327243] highmem bounce pool size: 64 pages
[    0.327340] initcall init_emergency_pool+0x0/0x57 returned 0 after 115 usecs
[    0.327433] calling  procswaps_init+0x0/0x1c @ 1
[    0.327527] initcall procswaps_init+0x0/0x1c returned 0 after 2 usecs
[    0.327619] calling  hugetlb_init+0x0/0x230 @ 1
[    0.327709] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.327811] initcall hugetlb_init+0x0/0x230 returned 0 after 99 usecs
[    0.328692] calling  slab_proc_init+0x0/0x1f @ 1
[    0.328784] initcall slab_proc_init+0x0/0x1f returned 0 after 2 usecs
[    0.328876] calling  slab_sysfs_init+0x0/0xb7 @ 1
[    0.333074] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 4008 usecs
[    0.333169] calling  fasync_init+0x0/0x24 @ 1
[    0.333268] initcall fasync_init+0x0/0x24 returned 0 after 6 usecs
[    0.333360] calling  proc_filesystems_init+0x0/0x1c @ 1
[    0.333455] initcall proc_filesystems_init+0x0/0x1c returned 0 after 3 usecs
[    0.333548] calling  dnotify_init+0x0/0x6f @ 1
[    0.333649] initcall dnotify_init+0x0/0x6f returned 0 after 10 usecs
[    0.333741] calling  inotify_setup+0x0/0x11 @ 1
[    0.333833] initcall inotify_setup+0x0/0x11 returned 0 after 1 usecs
[    0.333925] calling  inotify_user_setup+0x0/0x9e @ 1
[    0.334044] initcall inotify_user_setup+0x0/0x9e returned 0 after 20 usecs
[    0.334138] calling  aio_setup+0x0/0x60 @ 1
[    0.334295] initcall aio_setup+0x0/0x60 returned 0 after 65 usecs
[    0.334389] calling  proc_locks_init+0x0/0x1c @ 1
[    0.334483] initcall proc_locks_init+0x0/0x1c returned 0 after 2 usecs
[    0.334575] calling  init_mbcache+0x0/0x11 @ 1
[    0.334665] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs
[    0.334757] calling  dquot_init+0x0/0xdd @ 1
[    0.334845] VFS: Disk quotas dquot_6.5.2
[    0.335056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.335156] initcall dquot_init+0x0/0xdd returned 0 after 301 usecs
[    0.335249] calling  init_v2_quota_format+0x0/0xf @ 1
[    0.335349] initcall init_v2_quota_format+0x0/0xf returned 0 after 1 usecs
[    0.335442] calling  proc_cmdline_init+0x0/0x1c @ 1
[    0.335535] initcall proc_cmdline_init+0x0/0x1c returned 0 after 2 usecs
[    0.335629] calling  proc_cpuinfo_init+0x0/0x1c @ 1
[    0.335723] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 2 usecs
[    0.335815] calling  proc_devices_init+0x0/0x1c @ 1
[    0.335909] initcall proc_devices_init+0x0/0x1c returned 0 after 2 usecs
[    0.336010] calling  proc_interrupts_init+0x0/0x1c @ 1
[    0.336103] initcall proc_interrupts_init+0x0/0x1c returned 0 after 2 usecs
[    0.336197] calling  proc_loadavg_init+0x0/0x1c @ 1
[    0.336297] initcall proc_loadavg_init+0x0/0x1c returned 0 after 2 usecs
[    0.336390] calling  proc_meminfo_init+0x0/0x1c @ 1
[    0.336483] initcall proc_meminfo_init+0x0/0x1c returned 0 after 2 usecs
[    0.336576] calling  proc_stat_init+0x0/0x1c @ 1
[    0.336668] initcall proc_stat_init+0x0/0x1c returned 0 after 2 usecs
[    0.336759] calling  proc_uptime_init+0x0/0x1c @ 1
[    0.336851] initcall proc_uptime_init+0x0/0x1c returned 0 after 2 usecs
[    0.336943] calling  proc_version_init+0x0/0x1c @ 1
[    0.337060] initcall proc_version_init+0x0/0x1c returned 0 after 2 usecs
[    0.337152] calling  proc_softirqs_init+0x0/0x1c @ 1
[    0.337245] initcall proc_softirqs_init+0x0/0x1c returned 0 after 2 usecs
[    0.337347] calling  proc_kcore_init+0x0/0x40 @ 1
[    0.337439] initcall proc_kcore_init+0x0/0x40 returned 0 after 2 usecs
[    0.337532] calling  vmcore_init+0x0/0xa0b @ 1
[    0.337624] initcall vmcore_init+0x0/0xa0b returned 0 after 2 usecs
[    0.337716] calling  proc_kmsg_init+0x0/0x1f @ 1
[    0.337808] initcall proc_kmsg_init+0x0/0x1f returned 0 after 2 usecs
[    0.337901] calling  proc_page_init+0x0/0x33 @ 1
[    0.337995] initcall proc_page_init+0x0/0x33 returned 0 after 3 usecs
[    0.338093] calling  init_devpts_fs+0x0/0x41 @ 1
[    0.338196] initcall init_devpts_fs+0x0/0x41 returned 0 after 12 usecs
[    0.338296] calling  init_ext3_fs+0x0/0x5f @ 1
[    0.338545] initcall init_ext3_fs+0x0/0x5f returned 0 after 154 usecs
[    0.338636] calling  journal_init+0x0/0x85 @ 1
[    0.338965] initcall journal_init+0x0/0x85 returned 0 after 232 usecs
[    0.339070] calling  init_ramfs_fs+0x0/0xf @ 1
[    0.339161] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs
[    0.339254] calling  init_hugetlbfs_fs+0x0/0x84 @ 1
[    0.339441] initcall init_hugetlbfs_fs+0x0/0x84 returned 0 after 88 usecs
[    0.339535] calling  init_fat_fs+0x0/0x46 @ 1
[    0.339774] initcall init_fat_fs+0x0/0x46 returned 0 after 145 usecs
[    0.339866] calling  init_vfat_fs+0x0/0xf @ 1
[    0.339957] initcall init_vfat_fs+0x0/0xf returned 0 after 2 usecs
[    0.340057] calling  init_msdos_fs+0x0/0xf @ 1
[    0.340148] initcall init_msdos_fs+0x0/0xf returned 0 after 2 usecs
[    0.340240] calling  init_iso9660_fs+0x0/0x61 @ 1
[    0.340422] initcall init_iso9660_fs+0x0/0x61 returned 0 after 81 usecs
[    0.340515] calling  init_nfs_fs+0x0/0xf9 @ 1
[    0.340839] initcall init_nfs_fs+0x0/0xf9 returned 0 after 228 usecs
[    0.340931] calling  init_nlm+0x0/0x1c @ 1
[    0.341054] initcall init_nlm+0x0/0x1c returned 0 after 20 usecs
[    0.341146] calling  init_nls_cp437+0x0/0xf @ 1
[    0.341238] initcall init_nls_cp437+0x0/0xf returned 0 after 2 usecs
[    0.341339] calling  init_nls_ascii+0x0/0xf @ 1
[    0.341430] initcall init_nls_ascii+0x0/0xf returned 0 after 1 usecs
[    0.341523] calling  init_nls_iso8859_1+0x0/0xf @ 1
[    0.341615] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 1 usecs
[    0.341707] calling  init_nls_utf8+0x0/0x1f @ 1
[    0.341798] initcall init_nls_utf8+0x0/0x1f returned 0 after 1 usecs
[    0.341891] calling  init_autofs4_fs+0x0/0x1e @ 1
[    0.342055] initcall init_autofs4_fs+0x0/0x1e returned 0 after 71 usecs
[    0.342148] calling  ipc_init+0x0/0x20 @ 1
[    0.342239] msgmni has been set to 1725
[    0.342337] initcall ipc_init+0x0/0x20 returned 0 after 98 usecs
[    0.342430] calling  ipc_sysctl_init+0x0/0x11 @ 1
[    0.342553] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 32 usecs
[    0.342647] calling  init_mqueue_fs+0x0/0x9e @ 1
[    0.342845] initcall init_mqueue_fs+0x0/0x9e returned 0 after 104 usecs
[    0.342938] calling  key_proc_init+0x0/0x48 @ 1
[    0.343041] initcall key_proc_init+0x0/0x48 returned 0 after 4 usecs
[    0.343134] calling  selinux_nf_ip_init+0x0/0x54 @ 1
[    0.343222] SELinux:  Registering netfilter hooks
[    0.343321] initcall selinux_nf_ip_init+0x0/0x54 returned 0 after 94 usecs
[    0.343414] calling  init_sel_fs+0x0/0x5a @ 1
[    0.343585] initcall init_sel_fs+0x0/0x5a returned 0 after 76 usecs
[    0.343677] calling  selnl_init+0x0/0x46 @ 1
[    0.343773] initcall selnl_init+0x0/0x46 returned 0 after 6 usecs
[    0.343864] calling  sel_netif_init+0x0/0x57 @ 1
[    0.343957] initcall sel_netif_init+0x0/0x57 returned 0 after 3 usecs
[    0.344056] calling  sel_netnode_init+0x0/0x68 @ 1
[    0.344149] initcall sel_netnode_init+0x0/0x68 returned 0 after 2 usecs
[    0.344241] calling  sel_netport_init+0x0/0x68 @ 1
[    0.344340] initcall sel_netport_init+0x0/0x68 returned 0 after 2 usecs
[    0.344433] calling  aurule_init+0x0/0x30 @ 1
[    0.344523] initcall aurule_init+0x0/0x30 returned 0 after 1 usecs
[    0.344615] calling  crypto_wq_init+0x0/0x29 @ 1
[    0.344761] initcall crypto_wq_init+0x0/0x29 returned 0 after 54 usecs
[    0.344854] calling  crypto_algapi_init+0x0/0xc @ 1
[    0.344947] initcall crypto_algapi_init+0x0/0xc returned 0 after 3 usecs
[    0.345048] calling  chainiv_module_init+0x0/0xf @ 1
[    0.345141] initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs
[    0.345234] calling  eseqiv_module_init+0x0/0xf @ 1
[    0.345333] initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs
[    0.345425] calling  hmac_module_init+0x0/0xf @ 1
[    0.345517] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs
[    0.345609] calling  md5_mod_init+0x0/0xf @ 1
[    0.345762] initcall md5_mod_init+0x0/0xf returned 0 after 62 usecs
[    0.345855] calling  sha1_generic_mod_init+0x0/0xf @ 1
[    0.345998] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 50 usecs
[    0.346100] calling  crypto_ecb_module_init+0x0/0xf @ 1
[    0.346193] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs
[    0.346291] calling  crypto_cbc_module_init+0x0/0xf @ 1
[    0.346384] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 1 usecs
[    0.346477] calling  des_generic_mod_init+0x0/0x33 @ 1
[    0.346690] initcall des_generic_mod_init+0x0/0x33 returned 0 after 119 usecs
[    0.346785] calling  aes_init+0x0/0xf @ 1
[    0.346945] initcall aes_init+0x0/0xf returned 0 after 69 usecs
[    0.347046] calling  arc4_init+0x0/0xf @ 1
[    0.347226] initcall arc4_init+0x0/0xf returned 0 after 88 usecs
[    0.347324] calling  crypto_authenc_module_init+0x0/0xf @ 1
[    0.347417] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 1 usecs
[    0.347547] calling  krng_mod_init+0x0/0xf @ 1
[    0.347669] alg: No test for stdrng (krng)
[    0.347767] initcall krng_mod_init+0x0/0xf returned 0 after 126 usecs
[    0.347861] calling  proc_genhd_init+0x0/0x2d @ 1
[    0.347956] initcall proc_genhd_init+0x0/0x2d returned 0 after 4 usecs
[    0.348056] calling  bsg_init+0x0/0x10d @ 1
[    0.348296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.348427] initcall bsg_init+0x0/0x10d returned 0 after 275 usecs
[    0.348519] calling  noop_init+0x0/0x11 @ 1
[    0.348608] io scheduler noop registered
[    0.348696] initcall noop_init+0x0/0x11 returned 0 after 85 usecs
[    0.348786] calling  as_init+0x0/0x11 @ 1
[    0.348874] io scheduler anticipatory registered
[    0.348964] initcall as_init+0x0/0x11 returned 0 after 86 usecs
[    0.349062] calling  deadline_init+0x0/0x11 @ 1
[    0.349150] io scheduler deadline registered
[    0.349239] initcall deadline_init+0x0/0x11 returned 0 after 85 usecs
[    0.349338] calling  cfq_init+0x0/0x91 @ 1
[    0.349515] io scheduler cfq registered (default)
[    0.349605] initcall cfq_init+0x0/0x91 returned 0 after 173 usecs
[    0.349696] calling  percpu_counter_startup+0x0/0x16 @ 1
[    0.349789] initcall percpu_counter_startup+0x0/0x16 returned 0 after 1 usecs
[    0.349882] calling  audit_classes_init+0x0/0x4f @ 1
[    0.349978] initcall audit_classes_init+0x0/0x4f returned 0 after 4 usecs
[    0.350079] calling  pci_init+0x0/0x2c @ 1
[    0.350177] pci 0000:00:02.0: Boot video device
[    0.350285] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350377] pci 0000:00:1d.0: Performing full reset
[    0.350482] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350573] pci 0000:00:1d.1: Performing full reset
[    0.350677] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350769] pci 0000:00:1d.2: Performing full reset
[    0.350873] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[    0.350964] pci 0000:00:1d.3: Performing full reset
[    0.351107] initcall pci_init+0x0/0x2c returned 0 after 917 usecs
[    0.351199] calling  pci_proc_init+0x0/0x5b @ 1
[    0.351347] initcall pci_proc_init+0x0/0x5b returned 0 after 49 usecs
[    0.351440] calling  pcie_portdrv_init+0x0/0x41 @ 1
[    0.351664]   alloc irq_desc for 24 on node -1
[    0.351752]   alloc kstat_irqs on node -1
[    0.351850] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.351950] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.353132]   alloc irq_desc for 25 on node -1
[    0.353220]   alloc kstat_irqs on node -1
[    0.353324] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.353421] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.353816]   alloc irq_desc for 26 on node -1
[    0.353904]   alloc kstat_irqs on node -1
[    0.353998] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.354105] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.354480]   alloc irq_desc for 27 on node -1
[    0.354567]   alloc kstat_irqs on node -1
[    0.354660] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.354759] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.355139] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 3523 usecs
[    0.355233] calling  aer_service_init+0x0/0x1d @ 1
[    0.355390] initcall aer_service_init+0x0/0x1d returned 0 after 57 usecs
[    0.355483] calling  pci_hotplug_init+0x0/0x18 @ 1
[    0.355573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.355665] initcall pci_hotplug_init+0x0/0x18 returned 0 after 88 usecs
[    0.355757] calling  fb_console_init+0x0/0xf5 @ 1
[    0.355912] initcall fb_console_init+0x0/0xf5 returned 0 after 63 usecs
[    0.356014] calling  genericbl_init+0x0/0xf @ 1
[    0.356161] initcall genericbl_init+0x0/0xf returned 0 after 55 usecs
[    0.356253] calling  efifb_init+0x0/0x1b8 @ 1
[    0.356357] initcall efifb_init+0x0/0x1b8 returned -19 after 9 usecs
[    0.356450] calling  acpi_reserve_resources+0x0/0xc8 @ 1
[    0.356544] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 3 usecs
[    0.356638] calling  irqrouter_init_sysfs+0x0/0x33 @ 1
[    0.356829] initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 97 usecs
[    0.356923] calling  acpi_ac_init+0x0/0x3d @ 1
[    0.357536] ACPI: AC Adapter [AC] (on-line)
[    0.357690] initcall acpi_ac_init+0x0/0x3d returned 0 after 643 usecs
[    0.357785] calling  acpi_button_init+0x0/0x4a @ 1
[    0.357978] input: Power Button as /class/input/input0
[    0.358075] ACPI: Power Button [PWRF]
[    0.358286] input: Lid Switch as /class/input/input1
[    0.358958] ACPI: Lid Switch [LID]
[    0.359153] input: Sleep Button as /class/input/input2
[    0.359245] ACPI: Sleep Button [SLPB]
[    0.359403] initcall acpi_button_init+0x0/0x4a returned 0 after 1490 usecs
[    0.359496] calling  acpi_fan_init+0x0/0x4a @ 1
[    0.359649] initcall acpi_fan_init+0x0/0x4a returned 0 after 61 usecs
[    0.359741] calling  acpi_video_init+0x0/0x6b @ 1
[    0.360402] input: Video Bus as /class/input/input3
[    0.360492] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.360659] initcall acpi_video_init+0x0/0x6b returned 0 after 807 usecs
[    0.360753] calling  acpi_processor_init+0x0/0xe9 @ 1
[    0.361333] ACPI: SSDT 7f6e609e 001ED (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
[    0.362054] ACPI: SSDT 7f6e5de1 00238 (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
[    0.363535] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.363866] processor LNXCPU:00: registered as cooling_device0
[    0.363960] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.364541] ACPI: SSDT 7f6e628b 00094 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
[    0.365193] ACPI: SSDT 7f6e6019 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
[    0.366681] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.367015] processor LNXCPU:01: registered as cooling_device1
[    0.367108] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.367390] initcall acpi_processor_init+0x0/0xe9 returned 0 after 6391 usecs
[    0.367484] calling  acpi_container_init+0x0/0x3d @ 1
[    0.372921] initcall acpi_container_init+0x0/0x3d returned 0 after 5219 usecs
[    0.373026] calling  acpi_thermal_init+0x0/0x6f @ 1
[    0.376397] thermal LNXTHERM:01: registered as thermal_zone0
[    0.376493] ACPI: Thermal Zone [THM0] (55 C)
[    0.378159] thermal LNXTHERM:02: registered as thermal_zone1
[    0.378256] ACPI: Thermal Zone [THM1] (56 C)
[    0.378400] initcall acpi_thermal_init+0x0/0x6f returned 0 after 5157 usecs
[    0.378494] calling  acpi_battery_init+0x0/0x13 @ 1
[    0.420206] ACPI: Battery Slot [BAT0] (battery present)
[    0.420371] initcall acpi_battery_init+0x0/0x13 returned 0 after 40805 usecs
[    0.420467] calling  rand_initialize+0x0/0x25 @ 1
[    0.420582] initcall rand_initialize+0x0/0x25 returned 0 after 23 usecs
[    0.420675] calling  tty_init+0x0/0xd5 @ 1
[    0.425266] initcall tty_init+0x0/0xd5 returned 0 after 4393 usecs
[    0.425361] calling  pty_init+0x0/0x20d @ 1
[    0.425540] initcall pty_init+0x0/0x20d returned 0 after 86 usecs
[    0.425633] calling  sysrq_init+0x0/0x1f @ 1
[    0.425726] initcall sysrq_init+0x0/0x1f returned 0 after 4 usecs
[    0.425818] calling  hpet_init+0x0/0x57 @ 1
[    0.426111] initcall hpet_init+0x0/0x57 returned 0 after 197 usecs
[    0.426202] calling  nvram_init+0x0/0x70 @ 1
[    0.426358] Non-volatile memory driver v1.3
[    0.426448] initcall nvram_init+0x0/0x70 returned 0 after 144 usecs
[    0.426540] calling  mod_init+0x0/0x1ba @ 1
[    0.426734] intel_rng: FWH not detected
[    0.426854] initcall mod_init+0x0/0x1ba returned -19 after 219 usecs
[    0.426948] calling  mod_init+0x0/0x9f @ 1
[    0.427073] initcall mod_init+0x0/0x9f returned -19 after 16 usecs
[    0.427165] calling  mod_init+0x0/0x91 @ 1
[    0.427270] initcall mod_init+0x0/0x91 returned -19 after 15 usecs
[    0.427362] calling  mod_init+0x0/0x41 @ 1
[    0.427451] initcall mod_init+0x0/0x41 returned -19 after 0 usecs
[    0.427543] calling  agp_init+0x0/0x21 @ 1
[    0.427631] Linux agpgart interface v0.103
[    0.427720] initcall agp_init+0x0/0x21 returned 0 after 85 usecs
[    0.427811] calling  agp_amd64_init+0x0/0xc0 @ 1
[    0.427970] initcall agp_amd64_init+0x0/0xc0 returned -19 after 65 usecs
[    0.428083] calling  agp_intel_init+0x0/0x24 @ 1
[    0.428184] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.428933] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    0.432042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.432221] initcall agp_intel_init+0x0/0x24 returned 0 after 3948 usecs
[    0.432324] calling  drm_core_init+0x0/0xea @ 1
[    0.432486] [drm] Initialized drm 1.1.0 20060810
[    0.432577] initcall drm_core_init+0x0/0xea returned 0 after 159 usecs
[    0.432669] calling  i915_init+0x0/0x58 @ 1
[    0.432856] pci 0000:00:02.0: power state changed by ACPI to D0
[    0.432952] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.433066] pci 0000:00:02.0: setting latency timer to 64
[    0.435959] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.436130] initcall i915_init+0x0/0x58 returned 0 after 3288 usecs
[    0.436223] calling  cn_proc_init+0x0/0x30 @ 1
[    0.436325] initcall cn_proc_init+0x0/0x30 returned 0 after 3 usecs
[    0.436416] calling  serial8250_init+0x0/0x113 @ 1
[    0.436506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.436900] async_waiting @ 1
[    0.436986] async_continuing @ 1 after 1 usec
[    0.558108] async_waiting @ 1
[    0.558195] async_continuing @ 1 after 1 usec
[    0.680159] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[    0.680516] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[    0.680720] initcall serial8250_init+0x0/0x113 returned 0 after 238488 usecs
[    0.680814] calling  serial8250_pnp_init+0x0/0xf @ 1
[    0.681118] initcall serial8250_pnp_init+0x0/0xf returned 0 after 208 usecs
[    0.681212] calling  serial8250_pci_init+0x0/0x16 @ 1
[    0.681414] initcall serial8250_pci_init+0x0/0x16 returned 0 after 99 usecs
[    0.681510] calling  topology_sysfs_init+0x0/0x3f @ 1
[    0.681615] initcall topology_sysfs_init+0x0/0x3f returned 0 after 14 usecs
[    0.681709] calling  brd_init+0x0/0x14e @ 1
[    0.684430] brd: module loaded
[    0.684519] initcall brd_init+0x0/0x14e returned 0 after 2657 usecs
[    0.684612] calling  loop_init+0x0/0x166 @ 1
[    0.685961] loop: module loaded
[    0.686059] initcall loop_init+0x0/0x166 returned 0 after 1325 usecs
[    0.686152] calling  cpqarray_init+0x0/0x22b @ 1
[    0.686240] Compaq SMART2 Driver (v 2.6.0)
[    0.686452] initcall cpqarray_init+0x0/0x22b returned -19 after 204 usecs
[    0.686546] calling  mac_hid_init+0x0/0x75 @ 1
[    0.686729] input: Macintosh mouse button emulation as /class/input/input4
[    0.686851] initcall mac_hid_init+0x0/0x75 returned 0 after 209 usecs
[    0.686943] calling  spi_transport_init+0x0/0x6c @ 1
[    0.687171] initcall spi_transport_init+0x0/0x6c returned 0 after 101 usecs
[    0.687272] calling  ahc_linux_init+0x0/0x5c @ 1
[    0.687446] initcall ahc_linux_init+0x0/0x5c returned 0 after 81 usecs
[    0.687538] calling  init_sd+0x0/0xb6 @ 1
[    0.687733] initcall init_sd+0x0/0xb6 returned 0 after 103 usecs
[    0.687825] calling  init_sr+0x0/0x3d @ 1
[    0.687968] initcall init_sr+0x0/0x3d returned 0 after 52 usecs
[    0.688080] calling  init_sg+0x0/0x133 @ 1
[    0.688234] initcall init_sg+0x0/0x133 returned 0 after 62 usecs
[    0.688333] calling  ahci_init+0x0/0x16 @ 1
[    0.688446] ahci 0000:00:1f.2: version 3.0
[    0.688549] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.688679]   alloc irq_desc for 28 on node -1
[    0.688767]   alloc kstat_irqs on node -1
[    0.688863] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    0.689024] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    0.689157] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    0.689255] ahci 0000:00:1f.2: setting latency timer to 64
[    0.689459] scsi0 : ahci
[    0.689686] scsi1 : ahci
[    0.689879] scsi2 : ahci
[    0.690070] scsi3 : ahci
[    0.690291] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28
[    0.690419] ata2: DUMMY
[    0.690502] ata3: DUMMY
[    0.690585] ata4: DUMMY
[    1.250038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.251600] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[    1.251693] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    1.251785] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.253078] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
[    1.253170] ata1.00: 156301488 sectors, multi 16: LBA48 
[    1.254937] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[    1.255050] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    1.255932] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    1.257229] ata1.00: configured for UDMA/100
[    1.270677] ata1.00: configured for UDMA/100
[    1.270768] ata1: EH complete
[    1.270855] async_waiting @ 1
[    1.270941] async_continuing @ 1 after 1 usec
[    1.271148] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4I PQ: 0 ANSI: 5
[    1.271477] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.271659] sd 0:0:0:0: [sda] Write Protect is off
[    1.271748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.271864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.272142]  sda: sda1 sda2
[    1.659535] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.659772] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.659958] async_waiting @ 1
[    1.660055] async_continuing @ 1 after 1 usec
[    1.660159] async_waiting @ 1
[    1.660245] async_continuing @ 1 after 1 usec
[    1.660355] async_waiting @ 1
[    1.660442] async_continuing @ 1 after 1 usec
[    1.660601] initcall ahci_init+0x0/0x16 returned 0 after 949390 usecs
[    1.660693] calling  piix_init+0x0/0x27 @ 1
[    1.660798] ata_piix 0000:00:1f.1: version 2.13
[    1.660893] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[    1.661028] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.661196] scsi4 : ata_piix
[    1.661393] scsi5 : ata_piix
[    1.662298] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.662391] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.816409] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
[    1.822317] ata5.00: configured for UDMA/33
[    1.823055] async_waiting @ 1
[    1.823142] async_continuing @ 1 after 1 usec
[    1.827280] scsi 4:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
[    1.838286] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.838379] Uniform CD-ROM driver Revision: 3.20
[    1.838690] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.838933] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.839145] ata6: port disabled. ignoring.
[    1.839241] async_waiting @ 1
[    1.839335] async_continuing @ 1 after 1 usec
[    1.839489] initcall piix_init+0x0/0x27 returned 0 after 174516 usecs
[    1.839582] calling  nv_init+0x0/0x16 @ 1
[    1.839737] initcall nv_init+0x0/0x16 returned 0 after 64 usecs
[    1.839829] calling  amd_init+0x0/0x16 @ 1
[    1.839979] initcall amd_init+0x0/0x16 returned 0 after 59 usecs
[    1.840080] calling  mpiix_init+0x0/0x16 @ 1
[    1.840230] initcall mpiix_init+0x0/0x16 returned 0 after 58 usecs
[    1.840327] calling  oldpiix_init+0x0/0x16 @ 1
[    1.840478] initcall oldpiix_init+0x0/0x16 returned 0 after 59 usecs
[    1.840570] calling  sch_init+0x0/0x16 @ 1
[    1.840719] initcall sch_init+0x0/0x16 returned 0 after 57 usecs
[    1.840810] calling  ata_generic_init+0x0/0x16 @ 1
[    1.840963] initcall ata_generic_init+0x0/0x16 returned 0 after 60 usecs
[    1.841065] calling  e1000_init_module+0x0/0x6e @ 1
[    1.841154] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[    1.841246] Copyright (c) 1999-2006 Intel Corporation.
[    1.841412] initcall e1000_init_module+0x0/0x6e returned 0 after 251 usecs
[    1.841505] calling  e1000_init_module+0x0/0x53 @ 1
[    1.841594] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    1.841683] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    1.841874] e1000e 0000:02:00.0: Disabling L1 ASPM
[    1.842048] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.842149] e1000e 0000:02:00.0: setting latency timer to 64
[    1.842419]   alloc irq_desc for 29 on node -1
[    1.842507]   alloc kstat_irqs on node -1
[    1.842609] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    1.883473] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
[    1.925641] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2
[    1.925771] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.925937] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[    1.926107] initcall e1000_init_module+0x0/0x53 returned 0 after 82530 usecs
[    1.926200] calling  vortex_init+0x0/0x9b @ 1
[    1.926364] initcall vortex_init+0x0/0x9b returned 0 after 66 usecs
[    1.926457] calling  ne2k_pci_init+0x0/0x16 @ 1
[    1.926608] initcall ne2k_pci_init+0x0/0x16 returned 0 after 60 usecs
[    1.926701] calling  e100_init_module+0x0/0x4d @ 1
[    1.926790] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.926880] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.927046] initcall e100_init_module+0x0/0x4d returned 0 after 248 usecs
[    1.927138] calling  tg3_init+0x0/0x16 @ 1
[    1.927304] initcall tg3_init+0x0/0x16 returned 0 after 74 usecs
[    1.927396] calling  bnx2_init+0x0/0x16 @ 1
[    1.927547] initcall bnx2_init+0x0/0x16 returned 0 after 59 usecs
[    1.927639] calling  sky2_init_module+0x0/0x20 @ 1
[    1.927727] sky2 driver version 1.23
[    1.927880] initcall sky2_init_module+0x0/0x20 returned 0 after 147 usecs
[    1.927973] calling  net_olddevs_init+0x0/0x81 @ 1
[    1.928076] initcall net_olddevs_init+0x0/0x81 returned 0 after 5 usecs
[    1.928169] calling  init_nic+0x0/0x16 @ 1
[    1.928328] initcall init_nic+0x0/0x16 returned 0 after 66 usecs
[    1.928420] calling  rtl8139_init_module+0x0/0x16 @ 1
[    1.928576] initcall rtl8139_init_module+0x0/0x16 returned 0 after 64 usecs
[    1.928670] calling  rtl8169_init_module+0x0/0x16 @ 1
[    1.928823] initcall rtl8169_init_module+0x0/0x16 returned 0 after 60 usecs
[    1.928917] calling  init_ath5k_pci+0x0/0x2d @ 1
[    1.929084] initcall init_ath5k_pci+0x0/0x2d returned 0 after 68 usecs
[    1.929176] calling  init_netconsole+0x0/0x1a2 @ 1
[    1.929275] netconsole: local port 4444
[    1.929361] netconsole: local IP 10.0.1.15
[    1.929448] netconsole: interface eth0
[    1.929535] netconsole: remote port 4444
[    1.929621] netconsole: remote IP 10.0.1.21
[    1.929709] netconsole: remote ethernet address 00:30:48:c6:86:26
[    1.929801] netconsole: device eth0 not up yet, forcing it
[    1.943283] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    1.994113] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    4.659020] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[    4.817190] console [netcon0] enabled
[    4.817294] netconsole: network logging started
[    4.817394] initcall init_netconsole+0x0/0x1a2 returned 0 after 2820429 usecs
[    4.817497] calling  cdrom_init+0x0/0xc @ 1
[    4.817596] initcall cdrom_init+0x0/0xc returned 0 after 1 usecs
[    4.817697] calling  nonstatic_sysfs_init+0x0/0xf @ 1
[    4.817803] initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 5 usecs
[    4.817906] calling  yenta_socket_init+0x0/0x16 @ 1
[    4.818039] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[    4.818164] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[    4.818312] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[    4.818417] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[    4.919062] async_waiting @ 1
[    4.919152] async_continuing @ 1 after 1 usec
[    5.041827] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[    5.041922] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[    5.042032] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[    5.042173] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[    5.042326] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[    5.293140] initcall yenta_socket_init+0x0/0x16 returned 0 after 463995 usecs
[    5.293235] calling  mon_init+0x0/0xe2 @ 1
[    5.293480] initcall mon_init+0x0/0xe2 returned 0 after 131 usecs
[    5.293574] calling  ehci_hcd_init+0x0/0xbf @ 1
[    5.293672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.293774] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[    5.294375] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    5.294474]   alloc irq_desc for 19 on node -1
[    5.294564]   alloc kstat_irqs on node -1
[    5.294664] IOAPIC[0]: Set routing entry (1-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1)
[    5.294802] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    5.294912] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.295024] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.295145] drivers/usb/core/inode.c: creating file 'devices'
[    5.295247] drivers/usb/core/inode.c: creating file '001'
[    5.295428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.295566] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[    5.295707] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    5.295867] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
[    5.299905] ehci_hcd 0000:00:1d.7: debug port 1
[    5.300000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.300108] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    5.300219] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
[    5.300328] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    5.304353] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    5.310015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.310158] usb usb1: default language 0x0409
[    5.310254] usb usb1: udev 1, busnum 1, minor = 0
[    5.310353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.310454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.310591] usb usb1: Product: EHCI Host Controller
[    5.310687] usb usb1: Manufacturer: Linux 2.6.31-rc5-tip ehci_hcd
[    5.310786] usb usb1: SerialNumber: 0000:00:1d.7
[    5.310930] usb usb1: uevent
[    5.311098] usb usb1: usb_probe_device
[    5.311187] usb usb1: configuration #1 chosen from 1 choice
[    5.311297] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    5.311412] usb 1-0:1.0: uevent
[    5.311563] hub 1-0:1.0: usb_probe_interface
[    5.311653] hub 1-0:1.0: usb_probe_interface - got id
[    5.311751] hub 1-0:1.0: USB hub found
[    5.311851] hub 1-0:1.0: 8 ports detected
[    5.311946] hub 1-0:1.0: standalone hub
[    5.312049] hub 1-0:1.0: no power switching (usb 1.0)
[    5.312145] hub 1-0:1.0: individual port over-current protection
[    5.312245] hub 1-0:1.0: power on to power good time: 20ms
[    5.312352] hub 1-0:1.0: local power source is good
[    5.312450] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    5.312599] drivers/usb/core/inode.c: creating file '001'
[    5.312771] initcall ehci_hcd_init+0x0/0xbf returned 0 after 18649 usecs
[    5.312865] calling  ohci_hcd_mod_init+0x0/0x94 @ 1
[    5.312963] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.313070] ohci_hcd: block sizes: ed 64 td 64
[    5.313243] initcall ohci_hcd_mod_init+0x0/0x94 returned 0 after 271 usecs
[    5.313344] calling  uhci_hcd_init+0x0/0x10a @ 1
[    5.313441] uhci_hcd: USB Universal Host Controller Interface driver
[    5.314123] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    5.314220] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.314334] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.314433] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.314535] drivers/usb/core/inode.c: creating file '002'
[    5.314718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.314853] uhci_hcd 0000:00:1d.0: detected 2 ports
[    5.314954] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    5.315062] uhci_hcd 0000:00:1d.0: Performing full reset
[    5.315182] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    5.315284] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[    5.315433] usb usb2: default language 0x0409
[    5.315529] usb usb2: udev 1, busnum 2, minor = 128
[    5.315627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.315728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.315865] usb usb2: Product: UHCI Host Controller
[    5.315961] usb usb2: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.316068] usb usb2: SerialNumber: 0000:00:1d.0
[    5.316207] usb usb2: uevent
[    5.316373] usb usb2: usb_probe_device
[    5.317244] usb usb2: configuration #1 chosen from 1 choice
[    5.317354] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    5.317470] usb 2-0:1.0: uevent
[    5.317619] hub 2-0:1.0: usb_probe_interface
[    5.317717] hub 2-0:1.0: usb_probe_interface - got id
[    5.317813] hub 2-0:1.0: USB hub found
[    5.317913] hub 2-0:1.0: 2 ports detected
[    5.318015] hub 2-0:1.0: standalone hub
[    5.318111] hub 2-0:1.0: no power switching (usb 1.0)
[    5.318208] hub 2-0:1.0: individual port over-current protection
[    5.318315] hub 2-0:1.0: power on to power good time: 2ms
[    5.318416] hub 2-0:1.0: local power source is good
[    5.318513] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    5.318631] drivers/usb/core/inode.c: creating file '001'
[    5.318767]   alloc irq_desc for 17 on node -1
[    5.318857]   alloc kstat_irqs on node -1
[    5.318956] IOAPIC[0]: Set routing entry (1-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
[    5.319103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.319208] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.319316] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.319417] drivers/usb/core/inode.c: creating file '003'
[    5.319593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.319729] uhci_hcd 0000:00:1d.1: detected 2 ports
[    5.319830] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    5.319930] uhci_hcd 0000:00:1d.1: Performing full reset
[    5.320048] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    5.320159] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[    5.320293] usb usb3: default language 0x0409
[    5.320397] usb usb3: udev 1, busnum 3, minor = 256
[    5.320494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.320595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.320731] usb usb3: Product: UHCI Host Controller
[    5.320828] usb usb3: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.320927] usb usb3: SerialNumber: 0000:00:1d.1
[    5.321082] usb usb3: uevent
[    5.321232] usb usb3: usb_probe_device
[    5.321327] usb usb3: configuration #1 chosen from 1 choice
[    5.321430] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    5.321545] usb 3-0:1.0: uevent
[    5.321699] hub 3-0:1.0: usb_probe_interface
[    5.321787] hub 3-0:1.0: usb_probe_interface - got id
[    5.321883] hub 3-0:1.0: USB hub found
[    5.321985] hub 3-0:1.0: 2 ports detected
[    5.322087] hub 3-0:1.0: standalone hub
[    5.322182] hub 3-0:1.0: no power switching (usb 1.0)
[    5.322285] hub 3-0:1.0: individual port over-current protection
[    5.322385] hub 3-0:1.0: power on to power good time: 2ms
[    5.322485] hub 3-0:1.0: local power source is good
[    5.322582] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    5.322702] drivers/usb/core/inode.c: creating file '001'
[    5.323510] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[    5.323605]   alloc irq_desc for 18 on node -1
[    5.323693]   alloc kstat_irqs on node -1
[    5.323791] IOAPIC[0]: Set routing entry (1-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
[    5.323929] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.324043] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.324143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.324244] drivers/usb/core/inode.c: creating file '004'
[    5.324427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.324563] uhci_hcd 0000:00:1d.2: detected 2 ports
[    5.324663] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    5.324763] uhci_hcd 0000:00:1d.2: Performing full reset
[    5.324875] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    5.324985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    5.325132] usb usb4: default language 0x0409
[    5.325227] usb usb4: udev 1, busnum 4, minor = 384
[    5.325331] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.325432] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.325568] usb usb4: Product: UHCI Host Controller
[    5.325665] usb usb4: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.325765] usb usb4: SerialNumber: 0000:00:1d.2
[    5.325905] usb usb4: uevent
[    5.326071] usb usb4: usb_probe_device
[    5.326160] usb usb4: configuration #1 chosen from 1 choice
[    5.326264] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    5.326382] usb 4-0:1.0: uevent
[    5.326533] hub 4-0:1.0: usb_probe_interface
[    5.326622] hub 4-0:1.0: usb_probe_interface - got id
[    5.326719] hub 4-0:1.0: USB hub found
[    5.326820] hub 4-0:1.0: 2 ports detected
[    5.326915] hub 4-0:1.0: standalone hub
[    5.327017] hub 4-0:1.0: no power switching (usb 1.0)
[    5.327114] hub 4-0:1.0: individual port over-current protection
[    5.327213] hub 4-0:1.0: power on to power good time: 2ms
[    5.327322] hub 4-0:1.0: local power source is good
[    5.327418] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    5.327536] drivers/usb/core/inode.c: creating file '001'
[    5.327677] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    5.327774] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.327876] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.327977] drivers/usb/core/inode.c: creating file '005'
[    5.328167] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.328311] uhci_hcd 0000:00:1d.3: detected 2 ports
[    5.328411] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[    5.328512] uhci_hcd 0000:00:1d.3: Performing full reset
[    5.328627] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[    5.328768] usb usb5: default language 0x0409
[    5.328863] usb usb5: udev 1, busnum 5, minor = 512
[    5.328961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.329070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.329208] usb usb5: Product: UHCI Host Controller
[    5.329313] usb usb5: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
[    5.329413] usb usb5: SerialNumber: 0000:00:1d.3
[    5.329563] usb usb5: uevent
[    5.329713] usb usb5: usb_probe_device
[    5.329801] usb usb5: configuration #1 chosen from 1 choice
[    5.329906] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    5.330029] usb 5-0:1.0: uevent
[    5.330179] hub 5-0:1.0: usb_probe_interface
[    5.330275] hub 5-0:1.0: usb_probe_interface - got id
[    5.330372] hub 5-0:1.0: USB hub found
[    5.330472] hub 5-0:1.0: 2 ports detected
[    5.330568] hub 5-0:1.0: standalone hub
[    5.330663] hub 5-0:1.0: no power switching (usb 1.0)
[    5.330761] hub 5-0:1.0: individual port over-current protection
[    5.330861] hub 5-0:1.0: power on to power good time: 2ms
[    5.330961] hub 5-0:1.0: local power source is good
[    5.331067] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    5.331184] drivers/usb/core/inode.c: creating file '001'
[    5.331381] initcall uhci_hcd_init+0x0/0x10a returned 0 after 17516 usecs
[    5.331476] calling  usblp_init+0x0/0x16 @ 1
[    5.331635] usbcore: registered new interface driver usblp
[    5.331730] initcall usblp_init+0x0/0x16 returned 0 after 152 usecs
[    5.331830] calling  usb_stor_init+0x0/0x42 @ 1
[    5.331927] Initializing USB Mass Storage driver...
[    5.332119] usbcore: registered new interface driver usb-storage
[    5.332211] USB Mass Storage support registered.
[    5.332319] initcall usb_stor_init+0x0/0x42 returned 0 after 381 usecs
[    5.332420] calling  usb_usual_init+0x0/0x30 @ 1
[    5.332603] usbcore: registered new interface driver libusual
[    5.332699] initcall usb_usual_init+0x0/0x30 returned 0 after 176 usecs
[    5.332801] calling  i8042_init+0x0/0x35f @ 1
[    5.333051] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.333202] Platform driver 'i8042' needs updating - please use dev_pm_ops
[    5.341619] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.341716] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.341854] initcall i8042_init+0x0/0x35f returned 0 after 8744 usecs
[    5.341949] calling  serport_init+0x0/0x2b @ 1
[    5.342057] initcall serport_init+0x0/0x2b returned 0 after 1 usecs
[    5.342157] calling  mousedev_init+0x0/0x51 @ 1
[    5.342433] mice: PS/2 mouse device common for all mice
[    5.342526] initcall mousedev_init+0x0/0x51 returned 0 after 263 usecs
[    5.342627] calling  evdev_init+0x0/0xf @ 1
[    5.343079] initcall evdev_init+0x0/0xf returned 0 after 345 usecs
[    5.343173] calling  atkbd_init+0x0/0x20 @ 1
[    5.343350] initcall atkbd_init+0x0/0x20 returned 0 after 72 usecs
[    5.343444] calling  psmouse_init+0x0/0x61 @ 1
[    5.343667] initcall psmouse_init+0x0/0x61 returned 0 after 121 usecs
[    5.343761] calling  cmos_init+0x0/0x65 @ 1
[    5.343890] rtc_cmos 00:07: RTC can wake from S4
[    5.344078] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    5.344201] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    5.344386] initcall cmos_init+0x0/0x65 returned 0 after 513 usecs
[    5.344480] calling  i2c_i801_init+0x0/0x16 @ 1
[    5.344596] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.344903] initcall i2c_i801_init+0x0/0x16 returned 0 after 316 usecs
[    5.344997] calling  dm_init+0x0/0x39 @ 1
[    5.345454] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[    5.345590] initcall dm_init+0x0/0x39 returned 0 after 474 usecs
[    5.345690] calling  dm_mirror_init+0x0/0x69 @ 1
[    5.345811] initcall dm_mirror_init+0x0/0x69 returned 0 after 16 usecs
[    5.345912] calling  dm_dirty_log_init+0x0/0x49 @ 1
[    5.346021] initcall dm_dirty_log_init+0x0/0x49 returned 0 after 1 usecs
[    5.346122] calling  dm_zero_init+0x0/0x28 @ 1
[    5.346221] initcall dm_zero_init+0x0/0x28 returned 0 after 1 usecs
[    5.346330] calling  cpufreq_gov_dbs_init+0x0/0x9f @ 1
[    5.346526] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 88 usecs
[    5.346621] calling  init_ladder+0x0/0xf @ 1
[    5.347188] cpuidle: using governor ladder
[    5.348068] initcall init_ladder+0x0/0xf returned 0 after 1315 usecs
[    5.348169] calling  init_menu+0x0/0xf @ 1
[    5.349088] input: AT Translated Set 2 keyboard as /class/input/input5
[    5.349518] cpuidle: using governor menu
[    5.349610] initcall init_menu+0x0/0xf returned 0 after 1308 usecs
[    5.349711] calling  efivars_init+0x0/0x187 @ 1
[    5.349810] initcall efivars_init+0x0/0x187 returned -19 after 1 usecs
[    5.349912] calling  hid_init+0x0/0x3d @ 1
[    5.350186] initcall hid_init+0x0/0x3d returned 0 after 165 usecs
[    5.350284] calling  a4_init+0x0/0x16 @ 1
[    5.350470] initcall a4_init+0x0/0x16 returned 0 after 71 usecs
[    5.350563] calling  apple_init+0x0/0x2d @ 1
[    5.350740] initcall apple_init+0x0/0x2d returned 0 after 76 usecs
[    5.350833] calling  belkin_init+0x0/0x16 @ 1
[    5.350989] initcall belkin_init+0x0/0x16 returned 0 after 56 usecs
[    5.351097] calling  ch_init+0x0/0x16 @ 1
[    5.351275] initcall ch_init+0x0/0x16 returned 0 after 77 usecs
[    5.351369] calling  ch_init+0x0/0x16 @ 1
[    5.351539] initcall ch_init+0x0/0x16 returned 0 after 70 usecs
[    5.351632] calling  cp_init+0x0/0x16 @ 1
[    5.351791] initcall cp_init+0x0/0x16 returned 0 after 60 usecs
[    5.351885] calling  dr_init+0x0/0x16 @ 1
[    5.352056] initcall dr_init+0x0/0x16 returned 0 after 71 usecs
[    5.352149] calling  ez_init+0x0/0x16 @ 1
[    5.352342] initcall ez_init+0x0/0x16 returned 0 after 93 usecs
[    5.352435] calling  gyration_init+0x0/0x16 @ 1
[    5.352620] initcall gyration_init+0x0/0x16 returned 0 after 83 usecs
[    5.352715] calling  ks_init+0x0/0x16 @ 1
[    5.352904] initcall ks_init+0x0/0x16 returned 0 after 89 usecs
[    5.352998] calling  kye_init+0x0/0x16 @ 1
[    5.353189] initcall kye_init+0x0/0x16 returned 0 after 73 usecs
[    5.353285] calling  lg_init+0x0/0x16 @ 1
[    5.353468] initcall lg_init+0x0/0x16 returned 0 after 71 usecs
[    5.353562] calling  ms_init+0x0/0x16 @ 1
[    5.353974] initcall ms_init+0x0/0x16 returned 0 after 300 usecs
[    5.354089] calling  mr_init+0x0/0x16 @ 1
[    5.354263] initcall mr_init+0x0/0x16 returned 0 after 72 usecs
[    5.354364] calling  ntrig_init+0x0/0x16 @ 1
[    5.354534] initcall ntrig_init+0x0/0x16 returned 0 after 69 usecs
[    5.354628] calling  pl_init+0x0/0x16 @ 1
[    5.354794] initcall pl_init+0x0/0x16 returned 0 after 66 usecs
[    5.354887] calling  pl_init+0x0/0x16 @ 1
[    5.355059] initcall pl_init+0x0/0x16 returned 0 after 72 usecs
[    5.355151] calling  samsung_init+0x0/0x16 @ 1
[    5.355343] initcall samsung_init+0x0/0x16 returned 0 after 90 usecs
[    5.355436] calling  sjoy_init+0x0/0x16 @ 1
[    5.355616] initcall sjoy_init+0x0/0x16 returned 0 after 79 usecs
[    5.355710] calling  sony_init+0x0/0x16 @ 1
[    5.355898] initcall sony_init+0x0/0x16 returned 0 after 87 usecs
[    5.355992] calling  sp_init+0x0/0x16 @ 1
[    5.356194] initcall sp_init+0x0/0x16 returned 0 after 85 usecs
[    5.356290] calling  ga_init+0x0/0x16 @ 1
[    5.356481] initcall ga_init+0x0/0x16 returned 0 after 75 usecs
[    5.356574] calling  tm_init+0x0/0x16 @ 1
[    5.356733] initcall tm_init+0x0/0x16 returned 0 after 59 usecs
[    5.356826] calling  ts_init+0x0/0x16 @ 1
[    5.357000] initcall ts_init+0x0/0x16 returned 0 after 67 usecs
[    5.357106] calling  zp_init+0x0/0x16 @ 1
[    5.357289] initcall zp_init+0x0/0x16 returned 0 after 82 usecs
[    5.357382] calling  hid_init+0x0/0xaa @ 1
[    5.357681] usbcore: registered new interface driver hiddev
[    5.357859] usbcore: registered new interface driver usbhid
[    5.357951] usbhid: v2.6:USB HID core driver
[    5.358071] initcall hid_init+0x0/0xaa returned 0 after 576 usecs
[    5.358171] calling  usb_mouse_init+0x0/0x2d @ 1
[    5.358602] usbcore: registered new interface driver usbmouse
[    5.358695] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[    5.358797] initcall usb_mouse_init+0x0/0x2d returned 0 after 511 usecs
[    5.358899] calling  eeepc_laptop_init+0x0/0x3e1 @ 1
[    5.359180] initcall eeepc_laptop_init+0x0/0x3e1 returned -19 after 176 usecs
[    5.359277] calling  init_soundcore+0x0/0x64 @ 1
[    5.359459] initcall init_soundcore+0x0/0x64 returned 0 after 66 usecs
[    5.359553] calling  alsa_sound_init+0x0/0x77 @ 1
[    5.359667] Advanced Linux Sound Architecture Driver Version 1.0.20.
[    5.359770] initcall alsa_sound_init+0x0/0x77 returned 0 after 113 usecs
[    5.359872] calling  alsa_hwdep_init+0x0/0x46 @ 1
[    5.359974] initcall alsa_hwdep_init+0x0/0x46 returned 0 after 3 usecs
[    5.360098] calling  alsa_timer_init+0x0/0x12c @ 1
[    5.360287] initcall alsa_timer_init+0x0/0x12c returned 0 after 88 usecs
[    5.360382] calling  snd_hrtimer_init+0x0/0xd4 @ 1
[    5.360482] initcall snd_hrtimer_init+0x0/0xd4 returned 0 after 1 usecs
[    5.360584] calling  alsa_pcm_init+0x0/0x4d @ 1
[    5.360684] initcall alsa_pcm_init+0x0/0x4d returned 0 after 2 usecs
[    5.360785] calling  snd_mem_init+0x0/0x24 @ 1
[    5.360887] initcall snd_mem_init+0x0/0x24 returned 0 after 3 usecs
[    5.360987] calling  alsa_mixer_oss_init+0x0/0x2d @ 1
[    5.361111] initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 8 usecs
[    5.361206] calling  alsa_pcm_oss_init+0x0/0x76 @ 1
[    5.361322] initcall alsa_pcm_oss_init+0x0/0x76 returned 0 after 1 usecs
[    5.361431] calling  alsa_seq_init+0x0/0x51 @ 1
[    5.361905] initcall alsa_seq_init+0x0/0x51 returned 0 after 366 usecs
[    5.362000] calling  alsa_seq_device_init+0x0/0x4e @ 1
[    5.362110] initcall alsa_seq_device_init+0x0/0x4e returned 0 after 2 usecs
[    5.362212] calling  alsa_seq_midi_event_init+0x0/0x7 @ 1
[    5.362317] initcall alsa_seq_midi_event_init+0x0/0x7 returned 0 after 1 usecs
[    5.362466] calling  alsa_seq_oss_init+0x0/0x130 @ 1
[    5.362833] initcall alsa_seq_oss_init+0x0/0x130 returned 0 after 260 usecs
[    5.362929] calling  alsa_seq_dummy_init+0x0/0xa7 @ 1
[    5.363059] initcall alsa_seq_dummy_init+0x0/0xa7 returned 0 after 14 usecs
[    5.363153] calling  patch_realtek_init+0x0/0xf @ 1
[    5.363258] initcall patch_realtek_init+0x0/0xf returned 0 after 4 usecs
[    5.363371] calling  patch_cmedia_init+0x0/0xf @ 1
[    5.363472] initcall patch_cmedia_init+0x0/0xf returned 0 after 1 usecs
[    5.363572] calling  patch_analog_init+0x0/0xf @ 1
[    5.363673] initcall patch_analog_init+0x0/0xf returned 0 after 1 usecs
[    5.363773] calling  patch_sigmatel_init+0x0/0xf @ 1
[    5.363874] initcall patch_sigmatel_init+0x0/0xf returned 0 after 1 usecs
[    5.363975] calling  patch_si3054_init+0x0/0xf @ 1
[    5.364082] initcall patch_si3054_init+0x0/0xf returned 0 after 1 usecs
[    5.364183] calling  patch_atihdmi_init+0x0/0xf @ 1
[    5.364286] initcall patch_atihdmi_init+0x0/0xf returned 0 after 1 usecs
[    5.364397] calling  patch_ca0110_init+0x0/0xf @ 1
[    5.364497] initcall patch_ca0110_init+0x0/0xf returned 0 after 1 usecs
[    5.364597] calling  patch_conexant_init+0x0/0xf @ 1
[    5.364697] initcall patch_conexant_init+0x0/0xf returned 0 after 1 usecs
[    5.364798] calling  patch_via_init+0x0/0xf @ 1
[    5.364898] initcall patch_via_init+0x0/0xf returned 0 after 1 usecs
[    5.364998] calling  patch_nvhdmi_init+0x0/0xf @ 1
[    5.365106] initcall patch_nvhdmi_init+0x0/0xf returned 0 after 1 usecs
[    5.365208] calling  patch_intelhdmi_init+0x0/0xf @ 1
[    5.365312] initcall patch_intelhdmi_init+0x0/0xf returned 0 after 1 usecs
[    5.365425] calling  alsa_card_azx_init+0x0/0x16 @ 1
[    5.365557] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.365689] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    5.365808] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.399675] initcall alsa_card_azx_init+0x0/0x16 returned 0 after 33348 usecs
[    5.399772] calling  alsa_sound_last_init+0x0/0x50 @ 1
[    5.399872] ALSA device list:
[    5.399965]   #0: HDA Intel at 0xee240000 irq 17
[    5.400078] initcall alsa_sound_last_init+0x0/0x50 returned 0 after 199 usecs
[    5.400181] calling  flow_cache_init+0x0/0x141 @ 1
[    5.400318] initcall flow_cache_init+0x0/0x141 returned 0 after 33 usecs
[    5.400412] calling  llc_init+0x0/0x1b @ 1
[    5.400512] initcall llc_init+0x0/0x1b returned 0 after 1 usecs
[    5.400612] calling  snap_init+0x0/0x31 @ 1
[    5.400710] initcall snap_init+0x0/0x31 returned 0 after 1 usecs
[    5.400811] calling  rif_init+0x0/0x6b @ 1
[    5.400934] initcall rif_init+0x0/0x6b returned 0 after 24 usecs
[    5.401056] calling  blackhole_module_init+0x0/0xf @ 1
[    5.401158] initcall blackhole_module_init+0x0/0xf returned 0 after 1 usecs
[    5.401263] calling  nfnetlink_init+0x0/0x51 @ 1
[    5.401372] Netfilter messages via NETLINK v0.30.
[    5.401479] initcall nfnetlink_init+0x0/0x51 returned 0 after 102 usecs
[    5.401581] calling  nfnetlink_log_init+0x0/0xb3 @ 1
[    5.401699] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 10 usecs
[    5.401802] calling  nf_conntrack_standalone_init+0x0/0xf @ 1
[    5.401903] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.402740] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 816 usecs
[    5.402874] calling  ctnetlink_init+0x0/0x62 @ 1
[    5.402971] ctnetlink v0.93: registering with nfnetlink.
[    5.403091] initcall ctnetlink_init+0x0/0x62 returned 0 after 115 usecs
[    5.403194] calling  nf_conntrack_ftp_init+0x0/0x189 @ 1
[    5.403300] initcall nf_conntrack_ftp_init+0x0/0x189 returned 0 after 3 usecs
[    5.403412] calling  nf_conntrack_irc_init+0x0/0x17e @ 1
[    5.403517] initcall nf_conntrack_irc_init+0x0/0x17e returned 0 after 2 usecs
[    5.403619] calling  nf_conntrack_sip_init+0x0/0x159 @ 1
[    5.403721] initcall nf_conntrack_sip_init+0x0/0x159 returned 0 after 1 usecs
[    5.403823] calling  xt_init+0x0/0xda @ 1
[    5.403922] initcall xt_init+0x0/0xda returned 0 after 1 usecs
[    5.404029] calling  tcpudp_mt_init+0x0/0x14 @ 1
[    5.404130] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 2 usecs
[    5.404231] calling  connsecmark_tg_init+0x0/0xf @ 1
[    5.404345] initcall connsecmark_tg_init+0x0/0xf returned 0 after 10 usecs
[    5.404447] calling  mark_tg_init+0x0/0x14 @ 1
[    5.404547] initcall mark_tg_init+0x0/0x14 returned 0 after 1 usecs
[    5.404648] calling  nflog_tg_init+0x0/0xf @ 1
[    5.404747] initcall nflog_tg_init+0x0/0xf returned 0 after 1 usecs
[    5.404848] calling  secmark_tg_init+0x0/0xf @ 1
[    5.404948] initcall secmark_tg_init+0x0/0xf returned 0 after 1 usecs
[    5.405057] calling  tcpmss_tg_init+0x0/0x14 @ 1
[    5.405156] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 1 usecs
[    5.405259] calling  conntrack_mt_init+0x0/0x14 @ 1
[    5.405374] initcall conntrack_mt_init+0x0/0x14 returned 0 after 1 usecs
[    5.405475] calling  mark_mt_init+0x0/0x14 @ 1
[    5.405757] initcall mark_mt_init+0x0/0x14 returned 0 after 172 usecs
[    5.405851] calling  policy_mt_init+0x0/0x14 @ 1
[    5.405952] initcall policy_mt_init+0x0/0x14 returned 0 after 1 usecs
[    5.406838] calling  state_mt_init+0x0/0x14 @ 1
[    5.406946] initcall state_mt_init+0x0/0x14 returned 0 after 1 usecs
[    5.407052] calling  sysctl_ipv4_init+0x0/0x3f @ 1
[    5.407600] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 438 usecs
[    5.407694] calling  init_syncookies+0x0/0x16 @ 1
[    5.407844] initcall init_syncookies+0x0/0x16 returned 0 after 48 usecs
[    5.407938] calling  tunnel4_init+0x0/0x5a @ 1
[    5.408045] initcall tunnel4_init+0x0/0x5a returned 0 after 1 usecs
[    5.408147] calling  ipv4_netfilter_init+0x0/0xf @ 1
[    5.408248] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 1 usecs
[    5.408352] calling  nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1
[    5.409022] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 535 usecs
[    5.409154] calling  nf_nat_init+0x0/0xea @ 1
[    5.409290] initcall nf_nat_init+0x0/0xea returned 0 after 36 usecs
[    5.409383] calling  nf_defrag_init+0x0/0x14 @ 1
[    5.409483] initcall nf_defrag_init+0x0/0x14 returned 0 after 1 usecs
[    5.409584] calling  nf_nat_ftp_init+0x0/0x1e @ 1
[    5.409684] initcall nf_nat_ftp_init+0x0/0x1e returned 0 after 1 usecs
[    5.409784] calling  nf_nat_irc_init+0x0/0x1e @ 1
[    5.409884] initcall nf_nat_irc_init+0x0/0x1e returned 0 after 1 usecs
[    5.409983] calling  nf_nat_sip_init+0x0/0x91 @ 1
[    5.410091] initcall nf_nat_sip_init+0x0/0x91 returned 0 after 1 usecs
[    5.410191] calling  ip_tables_init+0x0/0x92 @ 1
[    5.410298] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.410407] initcall ip_tables_init+0x0/0x92 returned 0 after 112 usecs
[    5.410507] calling  iptable_filter_init+0x0/0x5d @ 1
[    5.410615] initcall iptable_filter_init+0x0/0x5d returned 0 after 8 usecs
[    5.410716] calling  iptable_mangle_init+0x0/0x38 @ 1
[    5.410822] initcall iptable_mangle_init+0x0/0x38 returned 0 after 5 usecs
[    5.410924] calling  nf_nat_standalone_init+0x0/0x73 @ 1
[    5.411036] initcall nf_nat_standalone_init+0x0/0x73 returned 0 after 5 usecs
[    5.411139] calling  log_tg_init+0x0/0x24 @ 1
[    5.411239] initcall log_tg_init+0x0/0x24 returned 0 after 1 usecs
[    5.411342] calling  masquerade_tg_init+0x0/0x2d @ 1
[    5.411693] initcall masquerade_tg_init+0x0/0x2d returned 0 after 225 usecs
[    5.411788] calling  reject_tg_init+0x0/0xf @ 1
[    5.411888] initcall reject_tg_init+0x0/0xf returned 0 after 1 usecs
[    5.411989] calling  ulog_tg_init+0x0/0xbe @ 1
[    5.412099] initcall ulog_tg_init+0x0/0xbe returned 0 after 4 usecs
[    5.412199] calling  cubictcp_register+0x0/0x93 @ 1
[    5.412301] TCP cubic registered
[    5.412410] initcall cubictcp_register+0x0/0x93 returned 0 after 105 usecs
[    5.412512] calling  xfrm_user_init+0x0/0x40 @ 1
[    5.412608] Initializing XFRM netlink socket
[    5.412709] initcall xfrm_user_init+0x0/0x40 returned 0 after 97 usecs
[    5.412810] calling  inet6_init+0x0/0x277 @ 1
[    5.413051] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
[    5.413184] hub 1-0:1.0: port 8: status 0501 change 0001
[    5.413671] NET: Registered protocol family 10
[    5.415678] initcall inet6_init+0x0/0x277 returned 0 after 2703 usecs
[    5.415774] calling  ah6_init+0x0/0x5a @ 1
[    5.415875] initcall ah6_init+0x0/0x5a returned 0 after 1 usecs
[    5.415974] calling  esp6_init+0x0/0x5a @ 1
[    5.416081] initcall esp6_init+0x0/0x5a returned 0 after 1 usecs
[    5.416181] calling  xfrm6_transport_init+0x0/0x14 @ 1
[    5.416285] initcall xfrm6_transport_init+0x0/0x14 returned 0 after 1 usecs
[    5.416396] calling  xfrm6_mode_tunnel_init+0x0/0x14 @ 1
[    5.416497] initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 1 usecs
[    5.416598] calling  xfrm6_beet_init+0x0/0x14 @ 1
[    5.416698] initcall xfrm6_beet_init+0x0/0x14 returned 0 after 1 usecs
[    5.416799] calling  ip6_tables_init+0x0/0x92 @ 1
[    5.416904] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.417011] initcall ip6_tables_init+0x0/0x92 returned 0 after 110 usecs
[    5.417113] calling  ip6table_filter_init+0x0/0x5d @ 1
[    5.417459] initcall ip6table_filter_init+0x0/0x5d returned 0 after 233 usecs
[    5.417560] calling  ip6table_mangle_init+0x0/0x38 @ 1
[    5.417668] initcall ip6table_mangle_init+0x0/0x38 returned 0 after 6 usecs
[    5.417769] calling  nf_conntrack_l3proto_ipv6_init+0x0/0xef @ 1
[    5.417937] initcall nf_conntrack_l3proto_ipv6_init+0x0/0xef returned 0 after 64 usecs
[    5.418102] calling  ipv6header_mt6_init+0x0/0xf @ 1
[    5.418205] initcall ipv6header_mt6_init+0x0/0xf returned 0 after 1 usecs
[    5.418309] calling  log_tg6_init+0x0/0x24 @ 1
[    5.418419] initcall log_tg6_init+0x0/0x24 returned 0 after 1 usecs
[    5.418520] calling  reject_tg6_init+0x0/0xf @ 1
[    5.418619] initcall reject_tg6_init+0x0/0xf returned 0 after 1 usecs
[    5.418719] calling  sit_init+0x0/0x5f @ 1
[    5.418815] IPv6 over IPv4 tunneling driver
[    5.419018] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.419887] initcall sit_init+0x0/0x5f returned 0 after 1044 usecs
[    5.419980] calling  packet_init+0x0/0x39 @ 1
[    5.420086] NET: Registered protocol family 17
[    5.420426] initcall packet_init+0x0/0x39 returned 0 after 329 usecs
[    5.420528] calling  init_sunrpc+0x0/0x53 @ 1
[    5.420932] RPC: Registered udp transport module.
[    5.421031] RPC: Registered tcp transport module.
[    5.421131] initcall init_sunrpc+0x0/0x53 returned 0 after 492 usecs
[    5.421232] calling  init_rpcsec_gss+0x0/0x3f @ 1
[    5.421344] initcall init_rpcsec_gss+0x0/0x3f returned 0 after 8 usecs
[    5.421453] calling  init_kerberos_module+0x0/0x26 @ 1
[    5.421556] initcall init_kerberos_module+0x0/0x26 returned 0 after 4 usecs
[    5.421661] calling  severities_debugfs_init+0x0/0x4e @ 1
[    5.421770] initcall severities_debugfs_init+0x0/0x4e returned 0 after 9 usecs
[    5.421910] calling  acpi_cpufreq_init+0x0/0xbf @ 1
[    5.422347] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.426065] initcall acpi_cpufreq_init+0x0/0xbf returned 0 after 3951 usecs
[    5.426162] calling  hpet_insert_resource+0x0/0x1e @ 1
[    5.426271] initcall hpet_insert_resource+0x0/0x1e returned 0 after 4 usecs
[    5.426381] calling  update_mp_table+0x0/0x3ad @ 1
[    5.426482] initcall update_mp_table+0x0/0x3ad returned 0 after 1 usecs
[    5.426590] calling  lapic_insert_resource+0x0/0x33 @ 1
[    5.426691] initcall lapic_insert_resource+0x0/0x33 returned 0 after 1 usecs
[    5.426793] calling  print_ipi_mode+0x0/0x26 @ 1
[    5.426890] Using IPI No-Shortcut mode
[    5.426986] initcall print_ipi_mode+0x0/0x26 returned 0 after 92 usecs
[    5.427096] calling  init_lapic_nmi_sysfs+0x0/0x33 @ 1
[    5.427196] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 1 usecs
[    5.427301] calling  io_apic_bug_finalize+0x0/0x1c @ 1
[    5.427415] initcall io_apic_bug_finalize+0x0/0x1c returned 0 after 2 usecs
[    5.427517] calling  check_early_ioremap_leak+0x0/0x5e @ 1
[    5.427619] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 1 usecs
[    5.427758] calling  pat_memtype_list_init+0x0/0x23 @ 1
[    5.428110] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.428218] initcall pat_memtype_list_init+0x0/0x23 returned 0 after 351 usecs
[    5.428361] calling  init_oops_id+0x0/0x3a @ 1
[    5.428473] initcall init_oops_id+0x0/0x3a returned 0 after 1 usecs
[    5.428574] calling  disable_boot_consoles+0x0/0x3a @ 1
[    5.428675] initcall disable_boot_consoles+0x0/0x3a returned 0 after 1 usecs
[    5.428777] calling  pm_qos_power_init+0x0/0x54 @ 1
[    5.429120] initcall pm_qos_power_init+0x0/0x54 returned 0 after 237 usecs
[    5.429216] calling  software_resume+0x0/0x19d @ 1
[    5.429319] PM: Resume from disk failed.
[    5.429429] initcall software_resume+0x0/0x19d returned -2 after 105 usecs
[    5.429531] initcall software_resume+0x0/0x19d returned with error code -2 
[    5.429635] calling  debugfs_kprobe_init+0x0/0x78 @ 1
[    5.429742] initcall debugfs_kprobe_init+0x0/0x78 returned 0 after 7 usecs
[    5.429844] calling  taskstats_init+0x0/0x7d @ 1
[    5.429945] registered taskstats version 1
[    5.430051] initcall taskstats_init+0x0/0x7d returned 0 after 107 usecs
[    5.430153] calling  clear_boot_tracer+0x0/0x27 @ 1
[    5.430253] initcall clear_boot_tracer+0x0/0x27 returned 0 after 1 usecs
[    5.430358] calling  max_swapfiles_check+0x0/0x7 @ 1
[    5.430470] initcall max_swapfiles_check+0x0/0x7 returned 0 after 1 usecs
[    5.430571] calling  random32_reseed+0x0/0x7e @ 1
[    5.430684] initcall random32_reseed+0x0/0x7e returned 0 after 14 usecs
[    5.430786] calling  pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[    5.430892] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 3 usecs
[    5.431048] calling  pci_sysfs_init+0x0/0x44 @ 1
[    5.431161] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[    5.431714] initcall pci_sysfs_init+0x0/0x44 returned 0 after 554 usecs
[    5.431811] calling  seqgen_init+0x0/0xe @ 1
[    5.431927] initcall seqgen_init+0x0/0xe returned 0 after 16 usecs
[    5.432038] calling  late_resume_init+0x0/0xc2 @ 1
[    5.432136]   Magic number: 5:366:74
[    5.432316] initcall late_resume_init+0x0/0xc2 returned 0 after 174 usecs
[    5.432410] calling  scsi_complete_async_scans+0x0/0xf4 @ 1
[    5.432511] initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 1 usecs
[    5.432649] calling  memmap_init+0x0/0x8a @ 1
[    5.432807] initcall memmap_init+0x0/0x8a returned 0 after 59 usecs
[    5.432901] calling  pci_mmcfg_late_insert_resources+0x0/0x12e @ 1
[    5.433013] initcall pci_mmcfg_late_insert_resources+0x0/0x12e returned 0 after 10 usecs
[    5.433153] calling  tcp_congestion_default+0x0/0xf @ 1
[    5.433257] initcall tcp_congestion_default+0x0/0xf returned 0 after 1 usecs
[    5.433372] calling  ip_auto_config+0x0/0xd22 @ 1
[    5.433475] initcall ip_auto_config+0x0/0xd22 returned 0 after 4 usecs
[    5.433576] calling  initialize_hashrnd+0x0/0x16 @ 1
[    5.433680] initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs
[    5.512059] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000
[    5.512156] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[    5.563254] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
[    5.563350] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
[    5.563490] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
[    5.614058] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
[    5.614211] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.614311] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
[    5.704097] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    5.704195] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
[    5.704315] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[    5.808059] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[    5.910056] usb 5-2: new full speed USB device using uhci_hcd and address 2
[    6.000070] Clocksource tsc unstable (delta = -270104002 ns)
[    6.011844] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
[    6.011976] serio: Synaptics pass-through port at isa0060/serio1/input0
[    6.030026] usb 5-2: ep0 maxpacket = 8
[    6.053781] usb 5-2: default language 0x0409
[    6.054626] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[    6.058807] async_waiting @ 1
[    6.058903] async_continuing @ 1 after 1 usec
[    6.059373] md: Waiting for all devices to be available before autodetect
[    6.059470] md: If you don't use raid, use raid=noautodetect
[    6.072781] usb 5-2: udev 2, busnum 5, minor = 513
[    6.072872] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[    6.072973] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.073094] usb 5-2: Product: Biometric Coprocessor
[    6.073190] usb 5-2: Manufacturer: STMicroelectronics
[    6.073349] usb 5-2: uevent
[    6.073630] usb 5-2: usb_probe_device
[    6.073719] usb 5-2: configuration #1 chosen from 1 choice
[    6.075783] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[    6.075892] usb 5-2:1.0: uevent
[    6.076112] drivers/usb/core/inode.c: creating file '002'
[    6.076222] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    6.454033] usb usb2: suspend_rh (auto-stop)
[    6.454146] usb usb3: suspend_rh (auto-stop)
[    6.454261] usb usb4: suspend_rh (auto-stop)
[    7.704063] hub 2-0:1.0: hub_suspend
[    7.704155] usb usb2: bus auto-suspend
[    7.704249] usb usb2: suspend_rh
[    7.704367] hub 3-0:1.0: hub_suspend
[    7.704456] usb usb3: bus auto-suspend
[    7.704551] usb usb3: suspend_rh
[    7.704660] hub 4-0:1.0: hub_suspend
[    7.704748] usb usb4: bus auto-suspend
[    7.704843] usb usb4: suspend_rh
[    7.704952] hub 1-0:1.0: hub_suspend
[    7.705050] usb usb1: bus auto-suspend
[    7.705154] ehci_hcd 0000:00:1d.7: suspend root hub
[   11.497204] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   11.725545] input: TPPS/2 IBM TrackPoint as /class/input/input7
[   11.807485] async_waiting @ 1
[   11.807575] async_continuing @ 1 after 1 usec
[   11.807943] md: Autodetecting RAID arrays.
[   11.808049] md: Scanned 0 and added 0 devices.
[   11.808146] md: autorun ...
[   11.808240] md: ... autorun DONE.
[   12.181957] kjournald starting.  Commit interval 5 seconds
[   12.181982] EXT3-fs: mounted filesystem with writeback data mode.
[   12.181993] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   12.182046] async_waiting @ 1
[   12.182050] async_continuing @ 1 after 1 usec
[   12.182062] Freeing unused kernel memory: 376k freed
[   12.182560] Write protecting the kernel text: 4500k
[   12.182721] Write protecting the kernel read-only data: 2196k
[   13.464436] sh used greatest stack depth: 6284 bytes left
[   14.209169] mount used greatest stack depth: 6256 bytes left
[   15.252079] awk used greatest stack depth: 5956 bytes left
[   16.155028] eth0: no IPv6 routers present
[   16.398723] readahead[895]: segfault at 0 ip 00c693b3 sp bfdbd30c error 4 in libc-2.9.so[bf2000+16e000]
[   16.929854] usb usb2: uevent
[   16.929976] usb 2-0:1.0: uevent
[   16.930154] usb usb3: uevent
[   16.930269] usb 3-0:1.0: uevent
[   16.930424] usb usb4: uevent
[   16.930547] usb 4-0:1.0: uevent
[   16.930696] usb usb5: uevent
[   16.930809] usb 5-0:1.0: uevent
[   16.930935] usb 5-2: uevent
[   16.931069] usb 5-2:1.0: uevent
[   16.931226] usb usb1: uevent
[   16.931350] usb 1-0:1.0: uevent
[   25.714165] EXT3 FS on sda1, internal journal
[   27.705850] Adding 4096564k swap on /dev/sda2.  Priority:-1 extents:1 across:4096564k 
[   29.035661] ip used greatest stack depth: 5752 bytes left
[   45.490796] CPUFREQ: ondemand sampling_rate_max sysfs file is deprecated - used by: cat
[  102.555904] ssh used greatest stack depth: 5312 bytes left

# head: baace7ea
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sun Aug 9 12:56:59 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not set
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_EVENT_PROFILE=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_UP_WANTED_1 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks. #

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=y CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#

# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#17 lore raw

Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race

Quoted 15 lines · Paul E. McKenney
Quoted 14 lines · Ingo Molnar
Quoted 11 lines · Ingo Molnar
Quoted 1 line

rcu: Add second diagnostic check for a possible CPU-hotplug race

has a build problem too:

kernel/built-in.o: In function `rcu_cpu_notified':
(.text+0x1d787): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x1174): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x11a8): undefined reference to `cpu_notified'

Quoted 4 lines
Quoted 1 line
Quoted 1 line

Maybe we should simplify all those Kconfig rules? It's a maze.

Or I could fix up my scripts so that I once again test the relevant combinations -before- I submit the patch. :-/

That said, I could imagine the following simplifications:

o CONFIG_SMP always implies CONFIG_HOTPLUG_CPU, eliminating the

	need to test CONFIG_SMP&&!CONFIG_HOTPLUG_CPU.

o Make CONFIG_NO_HZ unconditional. (Now, -that- should get a
reaction! For one thing, I am not sure that all architectures support CONFIG_NO_HZ.)

o Eliminate the combination CONFIG_PREEMPT && CONFIG_TREE_RCU.
In other words, make a preemptable kernel imply preemptable RCU and vice versa.

o After sufficient testing, eliminate CONFIG_PREEMPT_RCU in favor
of CONFIG_TREE_PREEMPT_RCU (currently under development).

o After sufficient testing, make !CONFIG_SMP imply
CONFIG_TINY_RCU. This might require a preemptable variant of CONFIG_TINY_RCU.

There are probably quite a few similar simplifications.

Thanx, Paul