rcu: Add diagnostic check for a possible CPU-hotplug race
Subsystems (2)
Commit-ID: 7256cf0e83bf018be8a81806593aaef7f2437f0b Gitweb: http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b Author: Paul E. McKenney <[email protected]> AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sun, 2 Aug 2009 21:31:28 +0200
rcu: Add diagnostic check for a possible CPU-hotplug race
Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.
LKML-Reference: <new-submission>
--- kernel/rcutree.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
kernel/rcutree.c +2 -0
@@ -1132,6 +1132,8 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) {unsigned long flags; +WARN_ON_ONCE (rdp->beenonline ==0 ); +/* * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs.
Quoted 7 lines · tip-bot for Paul E. McKenney
Commit-ID: 7256cf0e83bf018be8a81806593aaef7f2437f0b Gitweb: http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b Author: Paul E. McKenney <[email protected]> AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sun, 2 Aug 2009 21:31:28 +0200
Quoted 8 lines
rcu: Add diagnostic check for a possible CPU-hotplug race
Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.
Signed-off-by Paul E. McKenney <[email protected]>LKML-Reference: <new-submission>
Signed-off-by Ingo Molnar <[email protected]>
FYI, the new warning triggered in -tip testing:
calling tracer_alloc_buffers+0x0/0x296 @ 1
initcall tracer_alloc_buffers+0x0/0x296 returned 0 after 0 usecs calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4021.85 BogoMIPS (lpj=6700572)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 5 MCE banks
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs
Total of 2 processors activated (8043.58 BogoMIPS).
------------[ cut here ]------------ WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x2c/0xb9() Hardware name: System Product Name Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #280 Call Trace: [<c105229d>] warn_slowpath_common+0x60/0x90 [<c10522df>] warn_slowpath_null+0x12/0x15 [<c1091f70>] __rcu_process_callbacks+0x2c/0xb9 [<c1092021>] rcu_process_callbacks+0x24/0x42 [<c105737c>] __do_softirq+0xbc/0x16f [<c105746a>] do_softirq+0x3b/0x5f [<c10575c2>] irq_exit+0x3a/0x6d [<c10318cb>] smp_apic_timer_interrupt+0x74/0x82 [<c101f0af>] apic_timer_interrupt+0x2f/0x40 [<c101d7c2>] ? cpu_idle+0x77/0x99 [<c10370e0>] ? native_safe_halt+0xa/0xc [<c10248cf>] default_idle+0x80/0xd1 [<c101d7c8>] cpu_idle+0x7d/0x99 [<c1f806f1>] start_secondary+0xf7/0xf9 ---[ end trace 4eaa2a86a8e2da22 ]---
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
device: 'platform': device_add
khelper used greatest stack depth: 6632 bytes left
bus: 'platform': registered
Registering sysdev class 'cpu'
calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs calling net_ns_init+0x0/0x120 @ 1
initcall net_ns_init+0x0/0x120 returned 0 after 0 usecs
with the attached config.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sun Aug 2 22:16:02 2009
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=yCONFIG_X86_32_LAZY_GS=yCONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED is not set
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not setCONFIG_BROKEN_BOOT_DISALLOWED=yCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not setCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not setCONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=32CONFIG_RCU_FANOUT_EXACT=yCONFIG_TREE_RCU_TRACE=y
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not setCONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not setCONFIG_CGROUP_SCHED=yCONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_CGROUP_NS=yCONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not setCONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not setCONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=y
# CONFIG_EPOLL is not setCONFIG_SIGNALFD=yCONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not setCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not setCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=yCONFIG_STRIP_ASM_SYMS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=yCONFIG_OPROFILE_IBS=yCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_BLOCK=y
# CONFIG_LBDAF is not setCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not setCONFIG_DEFAULT_NOOP=yCONFIG_DEFAULT_IOSCHED="noop"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP_SUPPORT=yCONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set CONFIG_X86_RDC321X=y
# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=yCONFIG_VMI=yCONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
# CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not setCONFIG_M586MMX=y
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set CONFIG_X86_F00F_BUG=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_ALIGNMENT_16=y CONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_TSC=yCONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_CYRIX_32=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_HPET_TIMER is not setCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not setCONFIG_NR_CPUS=8CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=y CONFIG_X86_THERMAL_VECTOR=yCONFIG_VM86=yCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set CONFIG_UP_WANTED_1=y
# CONFIG_UP_WANTED_2 is not setCONFIG_SMP=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_HIGHPTE is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MATH_EMULATION=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not setCONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=yCONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE="" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K6=y
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not setCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=yCONFIG_X86_SPEEDSTEP_SMI=yCONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not setCONFIG_X86_LONGRUN=yCONFIG_X86_E_POWERSAVER=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not setCONFIG_PCI_BIOS=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not setCONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not setCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not setCONFIG_PCI_LEGACY=yCONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=yCONFIG_ISA=yCONFIG_EISA=yCONFIG_EISA_VLB_PRIMING=yCONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not setCONFIG_MCA=yCONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
# CONFIG_OLPC is not setCONFIG_K8_NB=yCONFIG_PCCARD=yCONFIG_PCMCIA_DEBUG=y
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_TOSHIBA=yCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=yCONFIG_HOTPLUG_PCI_COMPAQ=yCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not setCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not setCONFIG_HOTPLUG_PCI_SHPC=y
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not setCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not setCONFIG_NET_IPGRE=yCONFIG_ARPD=yCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not setCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_FTP is not set CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
#
# IPVS scheduler
#CONFIG_IP_VS_RR=yCONFIG_IP_VS_WRR=yCONFIG_IP_VS_LC=yCONFIG_IP_VS_WLC=yCONFIG_IP_VS_LBLC=yCONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not setCONFIG_IP_VS_SH=yCONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set
#
# IPVS application helper
#CONFIG_IP_VS_FTP=y
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=yCONFIG_NF_CONNTRACK_IPV4=yCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_FILTER is not setCONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not setCONFIG_NF_NAT=yCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_NF_NAT_FTP is not setCONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not setCONFIG_IP_NF_MANGLE=y
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not setCONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not setCONFIG_RDS=yCONFIG_RDS_DEBUG=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not setCONFIG_TIPC_DEBUG=yCONFIG_ATM=yCONFIG_ATM_CLIP=yCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not setCONFIG_ATM_BR2684=yCONFIG_ATM_BR2684_IPFILTER=yCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not setCONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not setCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=yCONFIG_NET_DSA_MV88E6123_61_65=yCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=yCONFIG_LLC2=y
# CONFIG_IPX is not setCONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=y
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not setCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not setCONFIG_CAN=yCONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=yCONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_SJA1000 is not setCONFIG_CAN_DEBUG_DEVICES=yCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=yCONFIG_IRNET=y
# CONFIG_IRCOMM is not setCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=yCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
# CONFIG_ACTISYS_DONGLE is not setCONFIG_TEKRAM_DONGLE=yCONFIG_TOIM3232_DONGLE=yCONFIG_LITELINK_DONGLE=yCONFIG_MA600_DONGLE=yCONFIG_GIRBIL_DONGLE=y
# CONFIG_MCP2120_DONGLE is not setCONFIG_OLD_BELKIN_DONGLE=y
# CONFIG_ACT200L_DONGLE is not setCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=yCONFIG_KS959_DONGLE=y
#
# FIR device drivers
#CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not setCONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=yCONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not setCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_MCS_FIR=y
# CONFIG_BT is not setCONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_DEBUG=yCONFIG_RXKAD=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=y
# CONFIG_CFG80211 is not setCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
#
# CFG80211 needs to be enabled for MAC80211
#CONFIG_MAC80211_DEFAULT_PS_VALUE=0CONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_INPUT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not setCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_DEV_XD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not setCONFIG_BLK_DEV_NBD=yCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_UB=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not setCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not setCONFIG_HP_ILO=yCONFIG_ISL29003=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not setCONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not setCONFIG_CB710_CORE=yCONFIG_CB710_DEBUG=yCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=yCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not setCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not setCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=y
# CONFIG_SCSI_CXGB3_ISCSI is not setCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_3W_9XXX=yCONFIG_SCSI_7000FASST=yCONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not setCONFIG_SCSI_AHA1740=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not setCONFIG_SCSI_MVSAS=yCONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not setCONFIG_SCSI_ADVANSYS=yCONFIG_SCSI_IN2000=yCONFIG_SCSI_ARCMSR=yCONFIG_SCSI_ARCMSR_AER=yCONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not setCONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not setCONFIG_SCSI_HPTIOP=yCONFIG_SCSI_BUSLOGIC=yCONFIG_SCSI_FLASHPOINT=yCONFIG_LIBFC=yCONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not setCONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not setCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_FD_MCS is not setCONFIG_SCSI_GDTH=yCONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not setCONFIG_SCSI_GENERIC_NCR53C400=yCONFIG_SCSI_IBMMCA=y
# CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not setCONFIG_IBMMCA_SCSI_DEV_RESET=yCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_PPA=yCONFIG_SCSI_IMM=yCONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not setCONFIG_SCSI_NCR_D700=yCONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_NCR_Q720 is not setCONFIG_SCSI_PAS16=yCONFIG_SCSI_QLOGIC_FAS=yCONFIG_SCSI_QLOGIC_1280=yCONFIG_SCSI_QLA_FC=y
# CONFIG_SCSI_QLA_ISCSI is not setCONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SIM710 is not setCONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=yCONFIG_SCSI_T128=yCONFIG_SCSI_U14_34F=yCONFIG_SCSI_U14_34F_TAGGED_QUEUE=yCONFIG_SCSI_U14_34F_LINKED_COMMANDS=yCONFIG_SCSI_U14_34F_MAX_TAGS=8CONFIG_SCSI_ULTRASTOR=yCONFIG_SCSI_NSP32=yCONFIG_SCSI_SRP=yCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not setCONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not setCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not setCONFIG_SATA_SIL=yCONFIG_SATA_SIS=yCONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not setCONFIG_SATA_INIC162X=yCONFIG_PATA_ALI=yCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not setCONFIG_PATA_CMD64X=yCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=yCONFIG_PATA_CS5535=yCONFIG_PATA_CS5536=yCONFIG_PATA_CYPRESS=yCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not setCONFIG_PATA_IT8213=yCONFIG_PATA_JMICRON=yCONFIG_PATA_LEGACY=yCONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not setCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=yCONFIG_PATA_NS87415=yCONFIG_PATA_OPTI=yCONFIG_PATA_OPTIDMA=yCONFIG_PATA_PDC_OLD=yCONFIG_PATA_QDI=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not setCONFIG_PATA_SIL680=yCONFIG_PATA_SIS=yCONFIG_PATA_VIA=yCONFIG_PATA_WINBOND=yCONFIG_PATA_WINBOND_VLB=yCONFIG_PATA_PLATFORM=yCONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information.
#CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_OHCI_DEBUG=yCONFIG_FIREWIRE_SBP2=yCONFIG_FIREWIRE_NET=yCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=yCONFIG_IEEE1394_PCILYNX=yCONFIG_IEEE1394_SBP2=yCONFIG_IEEE1394_SBP2_PHYS_DMA=yCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_DUMMY=yCONFIG_BONDING=y
# CONFIG_MACVLAN is not setCONFIG_EQUALIZER=yCONFIG_TUN=yCONFIG_VETH=y
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NET_VENDOR_3COM=yCONFIG_EL1=y
# CONFIG_EL2 is not setCONFIG_ELPLUS=yCONFIG_EL16=yCONFIG_EL3=y
# CONFIG_3C515 is not setCONFIG_ELMC=yCONFIG_ELMC_II=yCONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=yCONFIG_ULTRAMCA=yCONFIG_ULTRA=yCONFIG_ULTRA32=yCONFIG_SMC9194=yCONFIG_ETHOC=yCONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set CONFIG_AT1700=yCONFIG_DEPCA=y
# CONFIG_HP100 is not setCONFIG_NET_ISA=yCONFIG_E2100=y
# CONFIG_EWRK3 is not set CONFIG_EEXPRESS=yCONFIG_EEXPRESS_PRO=y
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not setCONFIG_ETH16I=yCONFIG_NE2000=yCONFIG_ZNET=y
# CONFIG_SEEQ8005 is not set CONFIG_NE2_MCA=yCONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_AC3200 is not set CONFIG_APRICOT=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_CS89x0=yCONFIG_E100=yCONFIG_LNE390=yCONFIG_FEALNX=yCONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set CONFIG_NE3210=yCONFIG_ES3210=y
# CONFIG_8139CP is not set CONFIG_8139TOO=yCONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=yCONFIG_SIS900=yCONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not setCONFIG_KS8842=yCONFIG_VIA_RHINE=yCONFIG_VIA_RHINE_MMIO=yCONFIG_SC92031=yCONFIG_NET_POCKET=yCONFIG_ATP=yCONFIG_DE600=y
# CONFIG_DE620 is not setCONFIG_ATL2=yCONFIG_NETDEV_1000=yCONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=yCONFIG_DL2K=yCONFIG_E1000=yCONFIG_E1000E=y
# CONFIG_IP1000 is not setCONFIG_IGB=yCONFIG_IGB_DCA=yCONFIG_IGBVF=yCONFIG_NS83820=yCONFIG_HAMACHI=yCONFIG_YELLOWFIN=yCONFIG_R8169=y
# CONFIG_R8169_VLAN is not set CONFIG_SIS190=yCONFIG_SKGE=yCONFIG_SKGE_DEBUG=yCONFIG_SKY2=yCONFIG_SKY2_DEBUG=yCONFIG_VIA_VELOCITY=yCONFIG_TIGON3=yCONFIG_BNX2=y
# CONFIG_QLA3XXX is not setCONFIG_ATL1=yCONFIG_ATL1E=yCONFIG_ATL1C=yCONFIG_JME=yCONFIG_NETDEV_10000=yCONFIG_MDIO=yCONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=y
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not setCONFIG_MYRI10GE=yCONFIG_MYRI10GE_DCA=yCONFIG_NIU=yCONFIG_MLX4_EN=yCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not setCONFIG_BNX2X=yCONFIG_QLGE=yCONFIG_SFC=yCONFIG_BE2NET=y
# CONFIG_TR is not set
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=yCONFIG_STRIP=y
# CONFIG_ARLAN is not setCONFIG_WAVELAN=y
# CONFIG_WLAN_80211 is not set
#
# WiMAX Wireless Broadband devices
#
#
# Enable MMC support to see WiMAX SDIO drivers
#
#
# USB Network Adapters
#CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not setCONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not setCONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not setCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not setCONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_HSO is not setCONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_WAN is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=yCONFIG_ATM_LANAI=yCONFIG_ATM_ENI=yCONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not setCONFIG_ATM_NICSTAR=y
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not setCONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=yCONFIG_ATM_AMBASSADOR_DEBUG=yCONFIG_ATM_HORIZON=yCONFIG_ATM_HORIZON_DEBUG=y
# CONFIG_ATM_IA is not setCONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not setCONFIG_ATM_SOLOS=y
# CONFIG_IEEE802154_DRIVERS is not setCONFIG_FDDI=yCONFIG_DEFXX=yCONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not setCONFIG_PPP=yCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=y
# CONFIG_PPPOATM is not setCONFIG_PPPOL2TP=y
# CONFIG_SLIP is not setCONFIG_SLHC=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not setCONFIG_ISDN=yCONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not setCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not setCONFIG_HISAX_NO_LLC=yCONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not setCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not setCONFIG_HISAX_TELESPCI=y
# CONFIG_HISAX_S0BOX is not setCONFIG_HISAX_AVM_A1=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_IX1MICROR2=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_ASUSCOM=yCONFIG_HISAX_TELEINT=yCONFIG_HISAX_HFCS=y
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not setCONFIG_HISAX_MIC=yCONFIG_HISAX_NETJET=y
# CONFIG_HISAX_NETJET_U is not setCONFIG_HISAX_NICCY=yCONFIG_HISAX_ISURF=y
# CONFIG_HISAX_HSTSAPHIR is not setCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=y
# CONFIG_HISAX_GAZEL is not setCONFIG_HISAX_HFC_PCI=y
# CONFIG_HISAX_W6692 is not setCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
# CONFIG_HISAX_ST5481 is not setCONFIG_HISAX_HFCUSB=yCONFIG_HISAX_HFC4S8S=yCONFIG_HISAX_FRITZ_PCIPNP=y
#
# Active cards
#CONFIG_ISDN_DRV_PCBIT=yCONFIG_ISDN_DRV_SC=y
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_CAPI is not setCONFIG_ISDN_DRV_GIGASET=yCONFIG_GIGASET_BASE=yCONFIG_GIGASET_M105=yCONFIG_GIGASET_M101=yCONFIG_GIGASET_DEBUG=y
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not setCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_LKKBD=yCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not setCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not setCONFIG_JOYSTICK_GRIP=yCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not setCONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not setCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not setCONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not setCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not setCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not setCONFIG_INPUT_WISTRON_BTNS=yCONFIG_INPUT_ATI_REMOTE=y
# CONFIG_INPUT_ATI_REMOTE2 is not setCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not setCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=yCONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not setCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not setCONFIG_CYCLADES=yCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=yCONFIG_MOXA_INTELLIO=yCONFIG_MOXA_SMARTIO=yCONFIG_ISI=yCONFIG_SYNCLINK=yCONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not setCONFIG_N_HDLC=yCONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not setCONFIG_SX=y
# CONFIG_RIO is not setCONFIG_STALDRV=yCONFIG_STALLION=yCONFIG_ISTALLION=yCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MCA is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not setCONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not setCONFIG_HW_RANDOM_VIRTIO=yCONFIG_NVRAM=y
# CONFIG_RTC is not setCONFIG_GEN_RTC=yCONFIG_GEN_RTC_X=yCONFIG_DTLK=yCONFIG_R3964=yCONFIG_APPLICOM=yCONFIG_SONYPI=yCONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not setCONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not setCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=yCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not setCONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=yCONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=yCONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_SCx200_I2C is not set
CONFIG_SCx200_ACB=y
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not setCONFIG_PCF8575=yCONFIG_SENSORS_PCA9539=yCONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not setCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not setCONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not setCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2431=yCONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=yCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_MAX17040 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ABITUGURU3=yCONFIG_SENSORS_AD7414=yCONFIG_SENSORS_AD7418=yCONFIG_SENSORS_ADM1021=yCONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not setCONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not setCONFIG_SENSORS_ADT7462=yCONFIG_SENSORS_ADT7470=yCONFIG_SENSORS_ADT7473=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not setCONFIG_SENSORS_ATXP1=yCONFIG_SENSORS_DS1621=yCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not setCONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHER is not setCONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not setCONFIG_SENSORS_GL520SM=yCONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not setCONFIG_SENSORS_IBMPEX=yCONFIG_SENSORS_IT87=yCONFIG_SENSORS_LM63=yCONFIG_SENSORS_LM75=yCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=yCONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LTC4215 is not setCONFIG_SENSORS_LTC4245=yCONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not setCONFIG_SENSORS_PC87360=yCONFIG_SENSORS_PC87427=yCONFIG_SENSORS_PCF8591=yCONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not setCONFIG_SENSORS_SMSC47M192=yCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_TMP401=yCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=yCONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not setCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not setCONFIG_SENSORS_W83L785TS=yCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_W83627HF=yCONFIG_SENSORS_W83627EHF=yCONFIG_SENSORS_HDAPS=yCONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not setCONFIG_PMIC_DA903X=yCONFIG_MFD_WM8400=y
# CONFIG_MFD_PCF50633 is not setCONFIG_AB3100_CORE=yCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not setCONFIG_REGULATOR_VIRTUAL_CONSUMER=yCONFIG_REGULATOR_USERSPACE_CONSUMER=yCONFIG_REGULATOR_BQ24022=y
# CONFIG_REGULATOR_MAX1586 is not setCONFIG_REGULATOR_WM8400=yCONFIG_REGULATOR_DA903X=yCONFIG_REGULATOR_LP3971=yCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_ALI=yCONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not setCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not setCONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not setCONFIG_AGP_EFFICEON=yCONFIG_DRM=yCONFIG_DRM_TDFX=yCONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not setCONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not setCONFIG_DRM_SAVAGE=y
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not setCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=yCONFIG_USB_MOUSE=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not setCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not setCONFIG_HID_EZKEY=yCONFIG_HID_KYE=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not setCONFIG_HID_LOGITECH=yCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_HID_MICROSOFT is not setCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=yCONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not setCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=yCONFIG_HID_GREENASIA=yCONFIG_GREENASIA_FF=yCONFIG_HID_SMARTJOYPLUS=yCONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TOPSEED is not setCONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not setCONFIG_HID_ZEROPLUS=yCONFIG_ZEROPLUS_FF=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not setCONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not setCONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_ISP1760_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not setCONFIG_USB_SL811_HCD=yCONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
#
# USB port drivers
#CONFIG_USB_USS720=yCONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP210X is not setCONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=yCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_GARMIN is not setCONFIG_USB_SERIAL_IPW=yCONFIG_USB_SERIAL_IUU=yCONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not setCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_MOTOROLA=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not setCONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not setCONFIG_USB_SERIAL_SIEMENS_MPI=yCONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not setCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_OPTICON=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not setCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not setCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not setCONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not setCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=yCONFIG_USB_ISIGHTFW=y
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_NOP_USB_XCEIV=y
# CONFIG_UWB is not set
# CONFIG_MMC is not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=yCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_NET48XX is not setCONFIG_LEDS_WRAP=yCONFIG_LEDS_ALIX2=y
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_LP3944=yCONFIG_LEDS_CLEVO_MAIL=yCONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_DA903X is not setCONFIG_LEDS_BD2802=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not setCONFIG_ACCESSIBILITY=yCONFIG_A11Y_BRAILLE_CONSOLE=yCONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not setCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=yCONFIG_INFINIBAND_MTHCA_DEBUG=yCONFIG_INFINIBAND_AMSO1100=yCONFIG_INFINIBAND_AMSO1100_DEBUG=yCONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not setCONFIG_MLX4_INFINIBAND=yCONFIG_INFINIBAND_NES=y
# CONFIG_INFINIBAND_NES_DEBUG is not setCONFIG_INFINIBAND_IPOIB=yCONFIG_INFINIBAND_IPOIB_CM=yCONFIG_INFINIBAND_IPOIB_DEBUG=yCONFIG_INFINIBAND_IPOIB_DEBUG_DATA=yCONFIG_INFINIBAND_SRP=yCONFIG_INFINIBAND_ISER=yCONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_AMD76X=y
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not setCONFIG_EDAC_I82975X=yCONFIG_EDAC_I3000=yCONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not setCONFIG_EDAC_I82860=yCONFIG_EDAC_R82600=yCONFIG_EDAC_I5000=yCONFIG_EDAC_I5100=y
# CONFIG_RTC_CLASS is not setCONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=yCONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not setCONFIG_ASYNC_TX_DMA=yCONFIG_DMATEST=yCONFIG_DCA=yCONFIG_AUXDISPLAY=yCONFIG_KS0108=yCONFIG_KS0108_PORT=0x378CONFIG_KS0108_DELAY=2CONFIG_UIO=yCONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not setCONFIG_UIO_PDRV_GENIRQ=yCONFIG_UIO_SMX=y
# CONFIG_UIO_AEC is not setCONFIG_UIO_SERCOS3=y
#
# TI VLYNQ
#
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_FS_XIP=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=yCONFIG_REISERFS_CHECK=yCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not setCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not setCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=yCONFIG_FSCACHE_STATS=yCONFIG_FSCACHE_HISTOGRAM=yCONFIG_FSCACHE_DEBUG=yCONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not setCONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_EXPORTFS=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not setCONFIG_ACORN_PARTITION_EESOX=yCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not setCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not setCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not setCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not setCONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not setCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=yCONFIG_DLM=yCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not setCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=yCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=yCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not setCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not setCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=yCONFIG_RCU_TORTURE_TEST=yCONFIG_RCU_TORTURE_TEST_RUNNABLE=yCONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not setCONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not setCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not setCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=yCONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not setCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_KSYM_TRACER is not setCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not setCONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not setCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not setCONFIG_BUILD_DOCSRC=yCONFIG_DYNAMIC_DEBUG=yCONFIG_DMA_API_DEBUG=yCONFIG_SAMPLES=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not setCONFIG_KGDB_TESTS=yCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not setCONFIG_DEBUG_STACK_USAGE=yCONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not setCONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not setCONFIG_SECURITY=yCONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not setCONFIG_SECURITY_PATH=yCONFIG_SECURITY_FILE_CAPABILITIES=yCONFIG_SECURITY_TOMOYO=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not setCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not setCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not setCONFIG_CRYPTO_DEV_HIFN_795X=yCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=yCONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not setCONFIG_VIRTIO_BALLOON=yCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=yCONFIG_X86_32_ALWAYS_ON=y
Quoted 12 lines · Ingo Molnar
Quoted 9 lines · tip-bot for Paul E. McKenney
Commit-ID: 7256cf0e83bf018be8a81806593aaef7f2437f0b Gitweb: http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b Author: Paul E. McKenney <[email protected]> AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sun, 2 Aug 2009 21:31:28 +0200rcu: Add diagnostic check for a possible CPU-hotplug race
Quoted 8 lines
Quoted 6 lines
Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.
Signed-off-by Paul E. McKenney <[email protected]>LKML-Reference: <new-submission>
Signed-off-by Ingo Molnar <[email protected]>FYI, the new warning triggered in -tip testing:
Yow!!! I never was able to get this to trigger... Of course, I never was able to reproduce the original problem, either.
Just so you know, one of the reasons it took me so long to come up with the fix is that this just isn't supposed to happen. Where I grew up, CPUs were supposed to come online -before- starting to handle softirqs. ;-)
Here is my reasoning:
o rcu_init(), which is invoked before a second CPU can possibly
come online, calls hotplug_notifier(), which causes rcu_barrier_cpu_hotplug() to be invoked in response to any CPU-hotplug event.
o We know rcu_init() really was called, because otherwise
open_softirq(RCU_SOFTIRQ) never gets called, so the softirq would never have happened. In addition, there should be a "Hierarchical RCU implementation" message in your bootlog. (Is there?)
o rcu_barrier_cpu_hotplug() unconditionally invokes
rcu_cpu_notify() on every CPU-hotplug event.
o rcu_cpu_notify() invokes rcu_online_cpu() in response to
any CPU_UP_PREPARE or CPU_UP_PREPARE_FROZEN CPU-hotplug event.
o The CPU_UP_PREPARE and CPU_UP_PREPARE_FROZEN CPU-hotplug events
happen before the CPU in question is capable of running any code.
o This looks to be the first onlining of this CPU during boot
(right?). So we cannot possibly have some strange situation where the end of the prior CPU-offline event overlaps with the current CPU-online event. (Yes, this isn't supposed to happen courtesy of CPU-hotplug locking, but impossibility is clearly no reason to dismiss possible scenarios for -this- particular bug.)
o Therefore the WARN_ON_ONCE() cannot possibly trigger.
This would be a convincing argument, aside from the fact that you really did make it trigger. So first, anything I am missing in the above? If not, could you please help me with the following, at least if the answers are readily available?
o Is rcu_init()'s "Hierarchical RCU implementation" log message
in your bootlog?
o Is _cpu_up() really being called, and, if so, is it really
invoking __raw_notifier_call_chain() with CPU_UP_PREPARE?
o Is this really during initial boot, or am I misreading your
bootlog? (The other reason I believe that this happened on the first CPU-online for this CPU is that ->beenonline, once set, is never cleared.)
Gautham, any thoughts on what might be happening here?
Thanx, Paul
Quoted 2,778 lines
calling
tracer_alloc_buffers+0x0/0x296@ 1
initcalltracer_alloc_buffers+0x0/0x296returned 0 after 0 usecs callinginit_trace_printk+0x0/0x7@ 1
initcallinit_trace_printk+0x0/0x7returned 0 after 0 usecs
lockdep: fixing up alternatives.
Booting processor 1 APIC0x1ip0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4021.85 BogoMIPS (lpj=6700572)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 5 MCE banks
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs
Total of 2 processors activated (8043.58 BogoMIPS).------------[ cut here ]------------ WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x2c/0xb9() Hardware name: System Product Name Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #280 Call Trace: [<c105229d>] warn_slowpath_common+0x60/0x90 [<c10522df>] warn_slowpath_null+0x12/0x15 [<c1091f70>] __rcu_process_callbacks+0x2c/0xb9 [<c1092021>] rcu_process_callbacks+0x24/0x42 [<c105737c>] __do_softirq+0xbc/0x16f [<c105746a>] do_softirq+0x3b/0x5f [<c10575c2>] irq_exit+0x3a/0x6d [<c10318cb>] smp_apic_timer_interrupt+0x74/0x82 [<c101f0af>] apic_timer_interrupt+0x2f/0x40 [<c101d7c2>] ? cpu_idle+0x77/0x99 [<c10370e0>] ? native_safe_halt+0xa/0xc [<c10248cf>] default_idle+0x80/0xd1 [<c101d7c8>] cpu_idle+0x7d/0x99 [<c1f806f1>] start_secondary+0xf7/0xf9 ---[ end trace 4eaa2a86a8e2da22 ]---CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
device: 'platform':device_add
khelper used greatest stack depth: 6632 bytes left
bus: 'platform': registered
Registering sysdev class 'cpu'
callinginit_cpufreq_transition_notifier_list+0x0/0x18@ 1 initcallinit_cpufreq_transition_notifier_list+0x0/0x18returned 0 after 0 usecs callingnet_ns_init+0x0/0x120@ 1
initcallnet_ns_init+0x0/0x120returned 0 after 0 usecswith the attached config.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sun Aug 2 22:16:02 2009
#
#CONFIG_64BITis not setCONFIG_X86_32=y
#CONFIG_X86_64is not setCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf32-i386"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_ARCH_MAY_HAVE_PC_FDC=y
#CONFIG_RWSEM_GENERIC_SPINLOCKis not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_ARCH_HAS_CPU_IDLE_WAIT=yCONFIG_GENERIC_CALIBRATE_DELAY=y
#CONFIG_GENERIC_TIME_VSYSCALLis not setCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
#CONFIG_HAVE_CPUMASK_OF_CPU_MAPis not setCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=y
#CONFIG_ZONE_DMA32is not setCONFIG_ARCH_POPULATES_NODE_MAP=y
#CONFIG_AUDIT_ARCHis not setCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=yCONFIG_X86_32_LAZY_GS=yCONFIG_KTIME_SCALAR=y
#CONFIG_BOOTPARAM_SUPPORT_NOT_WANTEDis not set
#CONFIG_BOOTPARAM_SUPPORTis not setCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_CONSTRUCTORS=y#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=y
#CONFIG_BROKEN_BOOT_ALLOWED3is not setCONFIG_BROKEN_BOOT_DISALLOWED=yCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
#CONFIG_LOCALVERSION_AUTOis not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
#CONFIG_KERNEL_BZIP2is not set
#CONFIG_KERNEL_LZMAis not set
#CONFIG_SWAPis not setCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=y
#CONFIG_TASK_DELAY_ACCTis not setCONFIG_TASK_XACCT=y
#CONFIG_TASK_IO_ACCOUNTINGis not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y#
# RCU Subsystem
#CONFIG_TREE_RCU=y
#CONFIG_PREEMPT_RCUis not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=32CONFIG_RCU_FANOUT_EXACT=yCONFIG_TREE_RCU_TRACE=y
#CONFIG_PREEMPT_RCU_TRACEis not set
#CONFIG_IKCONFIGis not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=y
#CONFIG_FAIR_GROUP_SCHEDis not setCONFIG_RT_GROUP_SCHED=y
#CONFIG_USER_SCHEDis not setCONFIG_CGROUP_SCHED=yCONFIG_CGROUPS=y
#CONFIG_CGROUP_DEBUGis not setCONFIG_CGROUP_NS=yCONFIG_CGROUP_FREEZER=y
#CONFIG_CGROUP_DEVICEis not set
#CONFIG_CPUSETSis not set
#CONFIG_CGROUP_CPUACCTis not setCONFIG_RESOURCE_COUNTERS=y
#CONFIG_CGROUP_MEM_RES_CTLRis not setCONFIG_SYSFS_DEPRECATED=y
#CONFIG_SYSFS_DEPRECATED_V2is not setCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=y
#CONFIG_PID_NSis not set
#CONFIG_NET_NSis not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
#CONFIG_KALLSYMS_EXTRA_PASSis not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=y
#CONFIG_EPOLLis not setCONFIG_SIGNALFD=yCONFIG_TIMERFD=y
#CONFIG_EVENTFDis not set
#CONFIG_SHMEMis not set
#CONFIG_AIOis not setCONFIG_HAVE_PERF_COUNTERS=y#
# Performance Counters
#
#CONFIG_PERF_COUNTERSis not set
#CONFIG_VM_EVENT_COUNTERSis not setCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=yCONFIG_STRIP_ASM_SYMS=y
#CONFIG_COMPAT_BRKis not set
#CONFIG_SLABis not setCONFIG_SLUB=y
#CONFIG_SLOBis not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=yCONFIG_OPROFILE_IBS=yCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=y#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
#CONFIG_MODULESis not setCONFIG_BLOCK=y
#CONFIG_LBDAFis not setCONFIG_BLK_DEV_BSG=y
#CONFIG_BLK_DEV_INTEGRITYis not set#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
#CONFIG_IOSCHED_ASis not set
#CONFIG_IOSCHED_DEADLINEis not set
#CONFIG_IOSCHED_CFQis not set
#CONFIG_DEFAULT_ASis not set
#CONFIG_DEFAULT_DEADLINEis not set
#CONFIG_DEFAULT_CFQis not setCONFIG_DEFAULT_NOOP=yCONFIG_DEFAULT_IOSCHED="noop"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
#CONFIG_HIGH_RES_TIMERSis not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP_SUPPORT=yCONFIG_X86_MPPARSE=y
#CONFIG_X86_BIGSMPis not setCONFIG_X86_EXTENDED_PLATFORM=y
#CONFIG_X86_ELANis not setCONFIG_X86_RDC321X=y
#CONFIG_X86_32_NON_STANDARDis not setCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_PARAVIRT_GUEST=yCONFIG_VMI=yCONFIG_KVM_CLOCK=y
#CONFIG_KVM_GUESTis not set
#CONFIG_LGUEST_GUESTis not setCONFIG_PARAVIRT=y
#CONFIG_PARAVIRT_SPINLOCKSis not setCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=y
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not setCONFIG_M586MMX=y
#CONFIG_M686is not set
#CONFIG_MPENTIUMIIis not set
#CONFIG_MPENTIUMIIIis not set
#CONFIG_MPENTIUMMis not set
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MK8is not set
#CONFIG_MCRUSOEis not set
#CONFIG_MEFFICEONis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MGEODEGX1is not set
#CONFIG_MGEODE_LXis not set
#CONFIG_MCYRIXIIIis not set
#CONFIG_MVIAC3_2is not set
#CONFIG_MVIAC7is not set
#CONFIG_MPSCis not set
#CONFIG_MCORE2is not set
#CONFIG_GENERIC_CPUis not setCONFIG_X86_GENERIC=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_XADD=y
#CONFIG_X86_PPRO_FENCEis not setCONFIG_X86_F00F_BUG=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_ALIGNMENT_16=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_TSC=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_CYRIX_32=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
#CONFIG_CPU_SUP_TRANSMETA_32is not set
#CONFIG_CPU_SUP_UMC_32is not set
#CONFIG_HPET_TIMERis not setCONFIG_DMI=y
#CONFIG_IOMMU_HELPERis not set
#CONFIG_IOMMU_APIis not setCONFIG_NR_CPUS=8CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
#CONFIG_PREEMPT_NONEis not setCONFIG_PREEMPT_VOLUNTARY=y
#CONFIG_PREEMPTis not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y
#CONFIG_X86_ANCIENT_MCEis not setCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=yCONFIG_X86_THERMAL_VECTOR=yCONFIG_VM86=yCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=y
#CONFIG_MICROCODEis not set
#CONFIG_X86_MSRis not setCONFIG_X86_CPUID=y
#CONFIG_X86_CPU_DEBUGis not setCONFIG_UP_WANTED_1=y
#CONFIG_UP_WANTED_2is not setCONFIG_SMP=y
#CONFIG_NOHIGHMEMis not setCONFIG_HIGHMEM4G=y
#CONFIG_HIGHMEM64Gis not setCONFIG_VMSPLIT_3G=y
#CONFIG_VMSPLIT_3G_OPTis not set
#CONFIG_VMSPLIT_2Gis not set
#CONFIG_VMSPLIT_2G_OPTis not set
#CONFIG_VMSPLIT_1Gis not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=y
#CONFIG_ARCH_PHYS_ADDR_T_64BITis not setCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0CONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
#CONFIG_DISCONTIGMEM_MANUALis not set
#CONFIG_SPARSEMEM_MANUALis not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
#CONFIG_PHYS_ADDR_T_64BITis not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=yCONFIG_MMU_NOTIFIER=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#CONFIG_HIGHPTEis not setCONFIG_X86_CHECK_BIOS_CORRUPTION=y
#CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECKis not setCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MATH_EMULATION=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
#CONFIG_X86_PATis not setCONFIG_SECCOMP=y
#CONFIG_CC_STACKPROTECTORis not set
#CONFIG_HZ_100is not set
#CONFIG_HZ_250is not setCONFIG_HZ_300=y
#CONFIG_HZ_1000is not setCONFIG_HZ=300
#CONFIG_SCHED_HRTICKis not set
#CONFIG_KEXECis not set
#CONFIG_CRASH_DUMPis not setCONFIG_PHYSICAL_START=0x1000000CONFIG_RELOCATABLE=yCONFIG_X86_NEED_RELOCS=yCONFIG_PHYSICAL_ALIGN=0x1000000
#CONFIG_HOTPLUG_CPUis not setCONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y#
# Power management and ACPI options
#
#CONFIG_PMis not set#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
#CONFIG_CPU_FREQ_DEBUGis not set
#CONFIG_CPU_FREQ_STATis not setCONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
#CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMANDis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVEis not setCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_POWERSAVE=yCONFIG_CPU_FREQ_GOV_USERSPACE=yCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_CPU_FREQ_GOV_CONSERVATIVE=y#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K6=y
#CONFIG_X86_POWERNOW_K7is not set
#CONFIG_X86_GX_SUSPMODis not setCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=yCONFIG_X86_SPEEDSTEP_SMI=yCONFIG_X86_P4_CLOCKMOD=y
#CONFIG_X86_CPUFREQ_NFORCE2is not setCONFIG_X86_LONGRUN=yCONFIG_X86_E_POWERSAVER=y#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_GOBIOS=y
#CONFIG_PCI_GOMMCONFIGis not set
#CONFIG_PCI_GODIRECTis not set
#CONFIG_PCI_GOOLPCis not set
#CONFIG_PCI_GOANYis not setCONFIG_PCI_BIOS=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=y
#CONFIG_HOTPLUG_PCI_PCIEis not setCONFIG_PCIEAER=y
#CONFIG_PCIE_ECRCis not set
#CONFIG_PCIEAER_INJECTis not setCONFIG_PCIEASPM=y
#CONFIG_PCIEASPM_DEBUGis not setCONFIG_ARCH_SUPPORTS_MSI=y
#CONFIG_PCI_MSIis not setCONFIG_PCI_LEGACY=yCONFIG_PCI_DEBUG=y
#CONFIG_PCI_STUBis not set
#CONFIG_HT_IRQis not set
#CONFIG_PCI_IOVis not setCONFIG_ISA_DMA_API=yCONFIG_ISA=yCONFIG_EISA=yCONFIG_EISA_VLB_PRIMING=yCONFIG_EISA_PCI_EISA=y
#CONFIG_EISA_VIRTUAL_ROOTis not set
#CONFIG_EISA_NAMESis not setCONFIG_MCA=yCONFIG_MCA_LEGACY=y
#CONFIG_MCA_PROC_FSis not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
#CONFIG_OLPCis not setCONFIG_K8_NB=yCONFIG_PCCARD=yCONFIG_PCMCIA_DEBUG=y
#CONFIG_PCMCIAis not set
#CONFIG_CARDBUSis not set#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_TOSHIBA=yCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=yCONFIG_HOTPLUG_PCI_COMPAQ=yCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
#CONFIG_HOTPLUG_PCI_IBMis not setCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
#CONFIG_HOTPLUG_PCI_CPCI_GENERICis not setCONFIG_HOTPLUG_PCI_SHPC=y#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
#CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERSis not setCONFIG_HAVE_AOUT=y
#CONFIG_BINFMT_AOUTis not set
#CONFIG_BINFMT_MISCis not setCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y#
# Networking options
#CONFIG_PACKET=y
#CONFIG_PACKET_MMAPis not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=y
#CONFIG_NET_KEYis not setCONFIG_INET=y
#CONFIG_IP_MULTICASTis not setCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
#CONFIG_IP_FIB_TRIEis not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=y
#CONFIG_IP_ROUTE_MULTIPATHis not set
#CONFIG_IP_ROUTE_VERBOSEis not set
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not setCONFIG_NET_IPGRE=yCONFIG_ARPD=yCONFIG_SYN_COOKIES=y
#CONFIG_INET_AHis not set
#CONFIG_INET_ESPis not setCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
#CONFIG_TCP_CONG_ADVANCEDis not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
#CONFIG_TCP_MD5SIGis not set
#CONFIG_IPV6is not set
#CONFIG_NETLABELis not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=y
#CONFIG_NETFILTER_ADVANCEDis not set#
# Core Netfilter Configuration
#
#CONFIG_NETFILTER_NETLINK_LOGis not setCONFIG_NF_CONNTRACK=yCONFIG_NF_CONNTRACK_SECMARK=y
#CONFIG_NF_CONNTRACK_FTPis not setCONFIG_NF_CONNTRACK_IRC=y
#CONFIG_NF_CONNTRACK_SIPis not set
#CONFIG_NF_CT_NETLINKis not setCONFIG_NETFILTER_XTABLES=y
#CONFIG_NETFILTER_XT_TARGET_CONNSECMARKis not set #CONFIG_NETFILTER_XT_TARGET_MARKis not set #CONFIG_NETFILTER_XT_TARGET_NFLOGis not setCONFIG_NETFILTER_XT_TARGET_SECMARK=y
#CONFIG_NETFILTER_XT_TARGET_TCPMSSis not setCONFIG_NETFILTER_XT_MATCH_CONNTRACK=yCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_POLICY=y
#CONFIG_NETFILTER_XT_MATCH_STATEis not setCONFIG_IP_VS=y
#CONFIG_IP_VS_DEBUGis not setCONFIG_IP_VS_TAB_BITS=12#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=y
#CONFIG_IP_VS_PROTO_ESPis not set
#CONFIG_IP_VS_PROTO_AHis not set#
# IPVS scheduler
#CONFIG_IP_VS_RR=yCONFIG_IP_VS_WRR=yCONFIG_IP_VS_LC=yCONFIG_IP_VS_WLC=yCONFIG_IP_VS_LBLC=yCONFIG_IP_VS_LBLCR=y
#CONFIG_IP_VS_DHis not setCONFIG_IP_VS_SH=yCONFIG_IP_VS_SED=y
#CONFIG_IP_VS_NQis not set#
# IPVS application helper
#CONFIG_IP_VS_FTP=y#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=yCONFIG_NF_CONNTRACK_IPV4=yCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_IPTABLES=y
#CONFIG_IP_NF_FILTERis not setCONFIG_IP_NF_TARGET_LOG=y
#CONFIG_IP_NF_TARGET_ULOGis not setCONFIG_NF_NAT=yCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=y
#CONFIG_NF_NAT_FTPis not setCONFIG_NF_NAT_IRC=y
#CONFIG_NF_NAT_TFTPis not set
#CONFIG_NF_NAT_AMANDAis not set
#CONFIG_NF_NAT_PPTPis not set
#CONFIG_NF_NAT_H323is not set
#CONFIG_NF_NAT_SIPis not setCONFIG_IP_NF_MANGLE=y
#CONFIG_IP_DCCPis not setCONFIG_IP_SCTP=y
#CONFIG_SCTP_DBG_MSGis not set
#CONFIG_SCTP_DBG_OBJCNTis not set
#CONFIG_SCTP_HMAC_NONEis not setCONFIG_SCTP_HMAC_SHA1=y
#CONFIG_SCTP_HMAC_MD5is not setCONFIG_RDS=yCONFIG_RDS_DEBUG=yCONFIG_TIPC=y
#CONFIG_TIPC_ADVANCEDis not setCONFIG_TIPC_DEBUG=yCONFIG_ATM=yCONFIG_ATM_CLIP=yCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=y
#CONFIG_ATM_MPOAis not setCONFIG_ATM_BR2684=yCONFIG_ATM_BR2684_IPFILTER=yCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=y
#CONFIG_NET_DSA_TAG_TRAILERis not setCONFIG_NET_DSA_MV88E6XXX=y
#CONFIG_NET_DSA_MV88E6060is not setCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=yCONFIG_NET_DSA_MV88E6123_61_65=yCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=y
#CONFIG_DECNET_ROUTERis not setCONFIG_LLC=yCONFIG_LLC2=y
#CONFIG_IPXis not setCONFIG_ATALK=y
#CONFIG_DEV_APPLETALKis not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=y
#CONFIG_ECONET_AUNUDPis not set
#CONFIG_ECONET_NATIVEis not setCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=y
#CONFIG_NET_SCHEDis not set
#CONFIG_DCBis not set#
# Network testing
#CONFIG_NET_PKTGEN=y
#CONFIG_NET_DROP_MONITORis not setCONFIG_HAMRADIO=y#
# Packet Radio protocols
#
#CONFIG_AX25is not setCONFIG_CAN=yCONFIG_CAN_RAW=y
#CONFIG_CAN_BCMis not set#
# CAN Device Drivers
#CONFIG_CAN_VCAN=yCONFIG_CAN_DEV=y
#CONFIG_CAN_CALC_BITTIMINGis not set
#CONFIG_CAN_SJA1000is not setCONFIG_CAN_DEBUG_DEVICES=yCONFIG_IRDA=y#
# IrDA protocols
#CONFIG_IRLAN=yCONFIG_IRNET=y
#CONFIG_IRCOMMis not setCONFIG_IRDA_ULTRA=y#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=yCONFIG_IRDA_DEBUG=y#
# Infrared-port device drivers
##
# SIR device drivers
#CONFIG_IRTTY_SIR=y#
# Dongle support
#CONFIG_DONGLE=y
#CONFIG_ESI_DONGLEis not set
#CONFIG_ACTISYS_DONGLEis not setCONFIG_TEKRAM_DONGLE=yCONFIG_TOIM3232_DONGLE=yCONFIG_LITELINK_DONGLE=yCONFIG_MA600_DONGLE=yCONFIG_GIRBIL_DONGLE=y
#CONFIG_MCP2120_DONGLEis not setCONFIG_OLD_BELKIN_DONGLE=y
#CONFIG_ACT200L_DONGLEis not setCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=yCONFIG_KS959_DONGLE=y#
# FIR device drivers
#CONFIG_USB_IRDA=y
#CONFIG_SIGMATEL_FIRis not setCONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=yCONFIG_TOSHIBA_FIR=y
#CONFIG_SMC_IRCC_FIRis not setCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_MCS_FIR=y
#CONFIG_BTis not setCONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_DEBUG=yCONFIG_RXKAD=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=y
#CONFIG_CFG80211is not setCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=y
#CONFIG_LIB80211_DEBUGis not set#
# CFG80211 needs to be enabled for MAC80211
#CONFIG_MAC80211_DEFAULT_PS_VALUE=0CONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_INPUT=y#
# Device Drivers
##
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
#CONFIG_FIRMWARE_IN_KERNELis not setCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=y
#CONFIG_SYS_HYPERVISORis not setCONFIG_CONNECTOR=y
#CONFIG_PROC_EVENTSis not setCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
#CONFIG_PARPORT_GSCis not set
#CONFIG_PARPORT_AX88796is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=y
#CONFIG_PNPis not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_DEV_XD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
#CONFIG_CISS_SCSI_TAPEis not setCONFIG_BLK_DEV_DAC960=y
#CONFIG_BLK_DEV_UMEMis not set
#CONFIG_BLK_DEV_COW_COMMONis not setCONFIG_BLK_DEV_LOOP=y
#CONFIG_BLK_DEV_CRYPTOLOOPis not setCONFIG_BLK_DEV_NBD=yCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_UB=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
#CONFIG_CDROM_PKTCDVD_WCACHEis not set
#CONFIG_ATA_OVER_ETHis not set
#CONFIG_VIRTIO_BLKis not setCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=y
#CONFIG_IBM_ASMis not set
#CONFIG_PHANTOMis not set
#CONFIG_SGI_IOC4is not setCONFIG_TIFM_CORE=y
#CONFIG_TIFM_7XX1is not set
#CONFIG_ICS932S401is not set
#CONFIG_ENCLOSURE_SERVICESis not setCONFIG_HP_ILO=yCONFIG_ISL29003=y
#CONFIG_C2PORTis not set#
# EEPROM support
#
#CONFIG_EEPROM_AT24is not set
#CONFIG_EEPROM_LEGACYis not setCONFIG_EEPROM_MAX6875=y
#CONFIG_EEPROM_93CX6is not setCONFIG_CB710_CORE=yCONFIG_CB710_DEBUG=yCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_HAVE_IDE=y#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
#CONFIG_SCSI_PROC_FSis not set#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=yCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=y
#CONFIG_CHR_DEV_SCHis not setCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#CONFIG_SCSI_SCAN_ASYNCis not set#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=y
#CONFIG_SCSI_SAS_LIBSAS_DEBUGis not setCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=y
#CONFIG_SCSI_CXGB3_ISCSIis not setCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_3W_9XXX=yCONFIG_SCSI_7000FASST=yCONFIG_SCSI_ACARD=y
#CONFIG_SCSI_AHA152Xis not setCONFIG_SCSI_AHA1740=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
#CONFIG_AIC7XXX_DEBUG_ENABLEis not setCONFIG_AIC7XXX_DEBUG_MASK=0
#CONFIG_AIC7XXX_REG_PRETTY_PRINTis not setCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
#CONFIG_AIC79XX_DEBUG_ENABLEis not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
#CONFIG_SCSI_AIC94XXis not setCONFIG_SCSI_MVSAS=yCONFIG_SCSI_MVSAS_DEBUG=y
#CONFIG_SCSI_DPT_I2Ois not setCONFIG_SCSI_ADVANSYS=yCONFIG_SCSI_IN2000=yCONFIG_SCSI_ARCMSR=yCONFIG_SCSI_ARCMSR_AER=yCONFIG_MEGARAID_NEWGEN=y
#CONFIG_MEGARAID_MMis not setCONFIG_MEGARAID_LEGACY=y
#CONFIG_MEGARAID_SASis not setCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128
#CONFIG_SCSI_MPT2SAS_LOGGINGis not setCONFIG_SCSI_HPTIOP=yCONFIG_SCSI_BUSLOGIC=yCONFIG_SCSI_FLASHPOINT=yCONFIG_LIBFC=yCONFIG_LIBFCOE=y
#CONFIG_FCOEis not set
#CONFIG_FCOE_FNICis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_DTC3280is not setCONFIG_SCSI_EATA=y
#CONFIG_SCSI_EATA_TAGGED_QUEUEis not set
#CONFIG_SCSI_EATA_LINKED_COMMANDSis not setCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=y
#CONFIG_SCSI_FD_MCSis not setCONFIG_SCSI_GDTH=yCONFIG_SCSI_GENERIC_NCR5380=y
#CONFIG_SCSI_GENERIC_NCR5380_MMIOis not setCONFIG_SCSI_GENERIC_NCR53C400=yCONFIG_SCSI_IBMMCA=y
#CONFIG_IBMMCA_SCSI_ORDER_STANDARDis not setCONFIG_IBMMCA_SCSI_DEV_RESET=yCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=y
#CONFIG_SCSI_INIA100is not setCONFIG_SCSI_PPA=yCONFIG_SCSI_IMM=yCONFIG_SCSI_IZIP_EPP16=y
#CONFIG_SCSI_IZIP_SLOW_CTRis not set
#CONFIG_SCSI_NCR53C406Ais not setCONFIG_SCSI_NCR_D700=yCONFIG_SCSI_STEX=y
#CONFIG_SCSI_SYM53C8XX_2is not setCONFIG_SCSI_IPR=y
#CONFIG_SCSI_IPR_TRACEis not set
#CONFIG_SCSI_IPR_DUMPis not set
#CONFIG_SCSI_NCR_Q720is not setCONFIG_SCSI_PAS16=yCONFIG_SCSI_QLOGIC_FAS=yCONFIG_SCSI_QLOGIC_1280=yCONFIG_SCSI_QLA_FC=y
#CONFIG_SCSI_QLA_ISCSIis not setCONFIG_SCSI_LPFC=y
#CONFIG_SCSI_LPFC_DEBUG_FSis not set
#CONFIG_SCSI_SIM710is not setCONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=yCONFIG_SCSI_T128=yCONFIG_SCSI_U14_34F=yCONFIG_SCSI_U14_34F_TAGGED_QUEUE=yCONFIG_SCSI_U14_34F_LINKED_COMMANDS=yCONFIG_SCSI_U14_34F_MAX_TAGS=8CONFIG_SCSI_ULTRASTOR=yCONFIG_SCSI_NSP32=yCONFIG_SCSI_SRP=yCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=y
#CONFIG_SCSI_DH_EMCis not set
#CONFIG_SCSI_DH_ALUAis not set
#CONFIG_SCSI_OSD_INITIATORis not setCONFIG_ATA=y
#CONFIG_ATA_NONSTANDARDis not setCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=y
#CONFIG_SATA_MVis not setCONFIG_SATA_NV=y
#CONFIG_PDC_ADMAis not setCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=y
#CONFIG_SATA_SX4is not setCONFIG_SATA_SIL=yCONFIG_SATA_SIS=yCONFIG_SATA_ULI=y
#CONFIG_SATA_VIAis not set
#CONFIG_SATA_VITESSEis not setCONFIG_SATA_INIC162X=yCONFIG_PATA_ALI=yCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=y
#CONFIG_PATA_CMD640_PCIis not setCONFIG_PATA_CMD64X=yCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=yCONFIG_PATA_CS5535=yCONFIG_PATA_CS5536=yCONFIG_PATA_CYPRESS=yCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=y
#CONFIG_PATA_HPT3X3is not set
#CONFIG_PATA_IT821Xis not setCONFIG_PATA_IT8213=yCONFIG_PATA_JMICRON=yCONFIG_PATA_LEGACY=yCONFIG_PATA_TRIFLEX=y
#CONFIG_PATA_MARVELLis not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
#CONFIG_PATA_NETCELLis not setCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=yCONFIG_PATA_NS87415=yCONFIG_PATA_OPTI=yCONFIG_PATA_OPTIDMA=yCONFIG_PATA_PDC_OLD=yCONFIG_PATA_QDI=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RZ1000=y
#CONFIG_PATA_SC1200is not set
#CONFIG_PATA_SERVERWORKSis not set
#CONFIG_PATA_PDC2027Xis not setCONFIG_PATA_SIL680=yCONFIG_PATA_SIS=yCONFIG_PATA_VIA=yCONFIG_PATA_WINBOND=yCONFIG_PATA_WINBOND_VLB=yCONFIG_PATA_PLATFORM=yCONFIG_PATA_SCH=y
#CONFIG_MDis not set
#CONFIG_FUSIONis not set#
# IEEE 1394 (FireWire) support
##
# You can enable one or both FireWire driver stacks. ##
# See the help texts for more information.
#CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_OHCI_DEBUG=yCONFIG_FIREWIRE_SBP2=yCONFIG_FIREWIRE_NET=yCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=yCONFIG_IEEE1394_PCILYNX=yCONFIG_IEEE1394_SBP2=yCONFIG_IEEE1394_SBP2_PHYS_DMA=yCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=y
#CONFIG_IEEE1394_VIDEO1394is not set
#CONFIG_IEEE1394_DV1394is not set
#CONFIG_IEEE1394_VERBOSEDEBUGis not set
#CONFIG_I2Ois not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_DUMMY=yCONFIG_BONDING=y
#CONFIG_MACVLANis not setCONFIG_EQUALIZER=yCONFIG_TUN=yCONFIG_VETH=y
#CONFIG_ARCNETis not setCONFIG_PHYLIB=y#
# MII PHY device drivers
#
#CONFIG_MARVELL_PHYis not set
#CONFIG_DAVICOM_PHYis not setCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=y
#CONFIG_BROADCOM_PHYis not setCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=y
#CONFIG_NATIONAL_PHYis not setCONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=yCONFIG_FIXED_PHY=y
#CONFIG_MDIO_BITBANGis not setCONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NET_VENDOR_3COM=yCONFIG_EL1=y
#CONFIG_EL2is not setCONFIG_ELPLUS=yCONFIG_EL16=yCONFIG_EL3=y
#CONFIG_3C515is not setCONFIG_ELMC=yCONFIG_ELMC_II=yCONFIG_VORTEX=y
#CONFIG_TYPHOONis not set
#CONFIG_LANCEis not setCONFIG_NET_VENDOR_SMC=yCONFIG_ULTRAMCA=yCONFIG_ULTRA=yCONFIG_ULTRA32=yCONFIG_SMC9194=yCONFIG_ETHOC=yCONFIG_NET_VENDOR_RACAL=y
#CONFIG_NI52is not set
#CONFIG_NI65is not set
#CONFIG_DNETis not set
#CONFIG_NET_TULIPis not setCONFIG_AT1700=yCONFIG_DEPCA=y
#CONFIG_HP100is not setCONFIG_NET_ISA=yCONFIG_E2100=y
#CONFIG_EWRK3is not setCONFIG_EEXPRESS=yCONFIG_EEXPRESS_PRO=y
#CONFIG_HPLANis not set
#CONFIG_LP486Eis not setCONFIG_ETH16I=yCONFIG_NE2000=yCONFIG_ZNET=y
#CONFIG_SEEQ8005is not setCONFIG_NE2_MCA=yCONFIG_IBMLANA=y
#CONFIG_IBM_NEW_EMAC_ZMIIis not set
#CONFIG_IBM_NEW_EMAC_RGMIIis not set
#CONFIG_IBM_NEW_EMAC_TAHis not set
#CONFIG_IBM_NEW_EMAC_EMAC4is not set
#CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRLis not set #CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTATis not set #CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERRis not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
#CONFIG_AMD8111_ETHis not setCONFIG_ADAPTEC_STARFIRE=y
#CONFIG_AC3200is not setCONFIG_APRICOT=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_FORCEDETH=y
#CONFIG_FORCEDETH_NAPIis not set CONFIG_CS89x0=yCONFIG_E100=yCONFIG_LNE390=yCONFIG_FEALNX=yCONFIG_NATSEMI=y
#CONFIG_NE2K_PCIis not setCONFIG_NE3210=yCONFIG_ES3210=y
#CONFIG_8139CPis not setCONFIG_8139TOO=yCONFIG_8139TOO_PIO=yCONFIG_8139TOO_TUNE_TWISTER=y
#CONFIG_8139TOO_8129is not setCONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=yCONFIG_SIS900=yCONFIG_EPIC100=y
#CONFIG_SMSC9420is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not setCONFIG_KS8842=yCONFIG_VIA_RHINE=yCONFIG_VIA_RHINE_MMIO=yCONFIG_SC92031=yCONFIG_NET_POCKET=yCONFIG_ATP=yCONFIG_DE600=y
#CONFIG_DE620is not setCONFIG_ATL2=yCONFIG_NETDEV_1000=yCONFIG_ACENIC=yCONFIG_ACENIC_OMIT_TIGON_I=yCONFIG_DL2K=yCONFIG_E1000=yCONFIG_E1000E=y
#CONFIG_IP1000is not setCONFIG_IGB=yCONFIG_IGB_DCA=yCONFIG_IGBVF=yCONFIG_NS83820=yCONFIG_HAMACHI=yCONFIG_YELLOWFIN=yCONFIG_R8169=y
#CONFIG_R8169_VLANis not setCONFIG_SIS190=yCONFIG_SKGE=yCONFIG_SKGE_DEBUG=yCONFIG_SKY2=yCONFIG_SKY2_DEBUG=yCONFIG_VIA_VELOCITY=yCONFIG_TIGON3=yCONFIG_BNX2=y
#CONFIG_QLA3XXXis not setCONFIG_ATL1=yCONFIG_ATL1E=yCONFIG_ATL1C=yCONFIG_JME=yCONFIG_NETDEV_10000=yCONFIG_MDIO=yCONFIG_CHELSIO_T1=y
#CONFIG_CHELSIO_T1_1Gis not setCONFIG_CHELSIO_T3_DEPENDS=yCONFIG_CHELSIO_T3=y
#CONFIG_ENICis not set
#CONFIG_IXGBEis not set
#CONFIG_IXGBis not set
#CONFIG_S2IOis not setCONFIG_MYRI10GE=yCONFIG_MYRI10GE_DCA=yCONFIG_NIU=yCONFIG_MLX4_EN=yCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=y
#CONFIG_TEHUTIis not setCONFIG_BNX2X=yCONFIG_QLGE=yCONFIG_SFC=yCONFIG_BE2NET=y
#CONFIG_TRis not set#
# Wireless LAN
#CONFIG_WLAN_PRE80211=yCONFIG_STRIP=y
#CONFIG_ARLANis not setCONFIG_WAVELAN=y
#CONFIG_WLAN_80211is not set#
# WiMAX Wireless Broadband devices
##
# Enable MMC support to see WiMAX SDIO drivers
##
# USB Network Adapters
#CONFIG_USB_CATC=y
#CONFIG_USB_KAWETHis not setCONFIG_USB_PEGASUS=y
#CONFIG_USB_RTL8150is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC95XX=y
#CONFIG_USB_NET_GL620Ais not set
#CONFIG_USB_NET_NET1080is not set
#CONFIG_USB_NET_PLUSBis not setCONFIG_USB_NET_MCS7830=y
#CONFIG_USB_NET_RNDIS_HOSTis not setCONFIG_USB_NET_CDC_SUBSET=y
#CONFIG_USB_ALI_M5632is not set
#CONFIG_USB_AN2720is not setCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=y
#CONFIG_USB_EPSON2888is not set
#CONFIG_USB_KC2190is not setCONFIG_USB_NET_ZAURUS=y
#CONFIG_USB_HSOis not setCONFIG_USB_NET_INT51X1=y
#CONFIG_USB_CDC_PHONETis not set
#CONFIG_WANis not setCONFIG_ATM_DRIVERS=y
#CONFIG_ATM_DUMMYis not setCONFIG_ATM_TCP=yCONFIG_ATM_LANAI=yCONFIG_ATM_ENI=yCONFIG_ATM_ENI_DEBUG=y
#CONFIG_ATM_ENI_TUNE_BURSTis not set
#CONFIG_ATM_FIRESTREAMis not set
#CONFIG_ATM_ZATMis not setCONFIG_ATM_NICSTAR=y
#CONFIG_ATM_NICSTAR_USE_SUNIis not set
#CONFIG_ATM_NICSTAR_USE_IDT77105is not setCONFIG_ATM_IDT77252=y
#CONFIG_ATM_IDT77252_DEBUGis not set
#CONFIG_ATM_IDT77252_RCV_ALLis not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=yCONFIG_ATM_AMBASSADOR_DEBUG=yCONFIG_ATM_HORIZON=yCONFIG_ATM_HORIZON_DEBUG=y
#CONFIG_ATM_IAis not setCONFIG_ATM_FORE200E=y
#CONFIG_ATM_FORE200E_USE_TASKLETis not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0
#CONFIG_ATM_HEis not setCONFIG_ATM_SOLOS=y
#CONFIG_IEEE802154_DRIVERSis not setCONFIG_FDDI=yCONFIG_DEFXX=yCONFIG_DEFXX_MMIO=y
#CONFIG_SKFPis not set
#CONFIG_HIPPIis not set
#CONFIG_PLIPis not setCONFIG_PPP=yCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=y
#CONFIG_PPP_MPPEis not setCONFIG_PPPOE=y
#CONFIG_PPPOATMis not setCONFIG_PPPOL2TP=y
#CONFIG_SLIPis not setCONFIG_SLHC=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
#CONFIG_VIRTIO_NETis not setCONFIG_ISDN=yCONFIG_ISDN_I4L=y
#CONFIG_ISDN_PPPis not set
#CONFIG_ISDN_AUDIOis not setCONFIG_ISDN_X25=y#
# ISDN feature submodules
#
#CONFIG_ISDN_DIVERSIONis not set#
# ISDN4Linux hardware drivers
##
# Passive cards
#CONFIG_ISDN_DRV_HISAX=y#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
#CONFIG_HISAX_NO_SENDCOMPLETEis not setCONFIG_HISAX_NO_LLC=yCONFIG_HISAX_NO_KEYPAD=y
#CONFIG_HISAX_1TR6is not setCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8#
# HiSax supported cards
#
#CONFIG_HISAX_16_0is not set
#CONFIG_HISAX_16_3is not setCONFIG_HISAX_TELESPCI=y
#CONFIG_HISAX_S0BOXis not setCONFIG_HISAX_AVM_A1=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_IX1MICROR2=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_ASUSCOM=yCONFIG_HISAX_TELEINT=yCONFIG_HISAX_HFCS=y
#CONFIG_HISAX_SEDLBAUERis not set
#CONFIG_HISAX_SPORTSTERis not setCONFIG_HISAX_MIC=yCONFIG_HISAX_NETJET=y
#CONFIG_HISAX_NETJET_Uis not setCONFIG_HISAX_NICCY=yCONFIG_HISAX_ISURF=y
#CONFIG_HISAX_HSTSAPHIRis not setCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=y
#CONFIG_HISAX_GAZELis not setCONFIG_HISAX_HFC_PCI=y
#CONFIG_HISAX_W6692is not setCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
#CONFIG_HISAX_DEBUGis not set#
# HiSax PCMCIA card service modules
##
# HiSax sub driver modules
#
#CONFIG_HISAX_ST5481is not setCONFIG_HISAX_HFCUSB=yCONFIG_HISAX_HFC4S8S=yCONFIG_HISAX_FRITZ_PCIPNP=y#
# Active cards
#CONFIG_ISDN_DRV_PCBIT=yCONFIG_ISDN_DRV_SC=y
#CONFIG_ISDN_DRV_ACT2000is not set
#CONFIG_ISDN_CAPIis not setCONFIG_ISDN_DRV_GIGASET=yCONFIG_GIGASET_BASE=yCONFIG_GIGASET_M105=yCONFIG_GIGASET_M101=yCONFIG_GIGASET_DEBUG=y
#CONFIG_PHONEis not set#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#CONFIG_INPUT_JOYDEVis not set
#CONFIG_INPUT_EVDEVis not setCONFIG_INPUT_EVBUG=y#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_LKKBD=yCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_SUNKBD=y
#CONFIG_KEYBOARD_XTKBDis not set
#CONFIG_INPUT_MOUSEis not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=y
#CONFIG_JOYSTICK_A3Dis not setCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=y
#CONFIG_JOYSTICK_GF2Kis not setCONFIG_JOYSTICK_GRIP=yCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=y
#CONFIG_JOYSTICK_TMDCis not setCONFIG_JOYSTICK_IFORCE=y
#CONFIG_JOYSTICK_IFORCE_USBis not setCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_DB9=y
#CONFIG_JOYSTICK_GAMECONis not set
#CONFIG_JOYSTICK_TURBOGRAFXis not set
#CONFIG_JOYSTICK_JOYDUMPis not setCONFIG_JOYSTICK_XPAD=y
#CONFIG_JOYSTICK_XPAD_FFis not setCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_INPUT_TABLET=y
#CONFIG_TABLET_USB_ACECADis not setCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=y
#CONFIG_INPUT_TOUCHSCREENis not setCONFIG_INPUT_MISC=y
#CONFIG_INPUT_PCSPKRis not set
#CONFIG_INPUT_APANELis not setCONFIG_INPUT_WISTRON_BTNS=yCONFIG_INPUT_ATI_REMOTE=y
#CONFIG_INPUT_ATI_REMOTE2is not setCONFIG_INPUT_KEYSPAN_REMOTE=y
#CONFIG_INPUT_POWERMATEis not setCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_UINPUT=y#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
#CONFIG_SERIO_RAWis not setCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=yCONFIG_GAMEPORT_EMU10K1=y
#CONFIG_GAMEPORT_FM801is not set#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
#CONFIG_DEVKMEMis not setCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=y
#CONFIG_ROCKETPORTis not setCONFIG_CYCLADES=yCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=yCONFIG_MOXA_INTELLIO=yCONFIG_MOXA_SMARTIO=yCONFIG_ISI=yCONFIG_SYNCLINK=yCONFIG_SYNCLINKMP=y
#CONFIG_SYNCLINK_GTis not setCONFIG_N_HDLC=yCONFIG_RISCOM8=y
#CONFIG_SPECIALIXis not setCONFIG_SX=y
#CONFIG_RIOis not setCONFIG_STALDRV=yCONFIG_STALLION=yCONFIG_ISTALLION=yCONFIG_NOZOMI=y#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=y
#CONFIG_SERIAL_8250_PCIis not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#CONFIG_SERIAL_8250_EXTENDEDis not set
#CONFIG_SERIAL_8250_MCAis not set#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_UNIX98_PTYS=y
#CONFIG_DEVPTS_MULTIPLE_INSTANCESis not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=y
#CONFIG_LP_CONSOLEis not setCONFIG_PPDEV=y
#CONFIG_VIRTIO_CONSOLEis not setCONFIG_IPMI_HANDLER=y
#CONFIG_IPMI_PANIC_EVENTis not set
#CONFIG_IPMI_DEVICE_INTERFACEis not setCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=y
#CONFIG_HW_RANDOM_VIAis not setCONFIG_HW_RANDOM_VIRTIO=yCONFIG_NVRAM=y
#CONFIG_RTCis not setCONFIG_GEN_RTC=yCONFIG_GEN_RTC_X=yCONFIG_DTLK=yCONFIG_R3964=yCONFIG_APPLICOM=yCONFIG_SONYPI=yCONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
#CONFIG_PC8736x_GPIOis not setCONFIG_NSC_GPIO=y
#CONFIG_CS5535_GPIOis not set
#CONFIG_RAW_DRIVERis not set
#CONFIG_HANGCHECK_TIMERis not set
#CONFIG_TCG_TPMis not setCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
#CONFIG_I2C_CHARDEVis not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y#
# I2C Hardware Bus support
##
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=yCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=y
#CONFIG_I2C_SIS96Xis not setCONFIG_I2C_VIA=y
#CONFIG_I2C_VIAPROis not set#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=yCONFIG_I2C_SIMTEC=y#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=yCONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y#
# Graphics adapter I2C/DDC channel drivers
#
#CONFIG_I2C_VOODOO3is not set#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=y
#CONFIG_SCx200_I2Cis not set
CONFIG_SCx200_ACB=y#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=y
#CONFIG_SENSORS_PCF8574is not setCONFIG_PCF8575=yCONFIG_SENSORS_PCA9539=yCONFIG_SENSORS_TSL2550=y
#CONFIG_I2C_DEBUG_COREis not set
#CONFIG_I2C_DEBUG_ALGOis not setCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=y
#CONFIG_SPIis not set#
# PPS support
#
#CONFIG_PPSis not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#CONFIG_GPIOLIBis not setCONFIG_W1=yCONFIG_W1_CON=y#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=y
#CONFIG_W1_MASTER_DS2490is not setCONFIG_W1_MASTER_DS2482=y#
# 1-wire Slaves
#
#CONFIG_W1_SLAVE_THERMis not setCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2431=yCONFIG_W1_SLAVE_DS2433=y
#CONFIG_W1_SLAVE_DS2433_CRCis not setCONFIG_W1_SLAVE_DS2760=y
#CONFIG_W1_SLAVE_BQ27000is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=yCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2782=y
#CONFIG_BATTERY_BQ27x00is not setCONFIG_BATTERY_DA9030=y
#CONFIG_BATTERY_MAX17040is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
#CONFIG_SENSORS_ABITUGURUis not setCONFIG_SENSORS_ABITUGURU3=yCONFIG_SENSORS_AD7414=yCONFIG_SENSORS_AD7418=yCONFIG_SENSORS_ADM1021=yCONFIG_SENSORS_ADM1025=y
#CONFIG_SENSORS_ADM1026is not set
#CONFIG_SENSORS_ADM1029is not setCONFIG_SENSORS_ADM1031=y
#CONFIG_SENSORS_ADM9240is not setCONFIG_SENSORS_ADT7462=yCONFIG_SENSORS_ADT7470=yCONFIG_SENSORS_ADT7473=y
#CONFIG_SENSORS_ADT7475is not set
#CONFIG_SENSORS_K8TEMPis not set
#CONFIG_SENSORS_ASB100is not setCONFIG_SENSORS_ATXP1=yCONFIG_SENSORS_DS1621=yCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=y
#CONFIG_SENSORS_F71882FGis not setCONFIG_SENSORS_F75375S=y
#CONFIG_SENSORS_FSCHERis not setCONFIG_SENSORS_FSCPOS=y
#CONFIG_SENSORS_FSCHMDis not set
#CONFIG_SENSORS_G760Ais not set
#CONFIG_SENSORS_GL518SMis not setCONFIG_SENSORS_GL520SM=yCONFIG_SENSORS_CORETEMP=y
#CONFIG_SENSORS_IBMAEMis not setCONFIG_SENSORS_IBMPEX=yCONFIG_SENSORS_IT87=yCONFIG_SENSORS_LM63=yCONFIG_SENSORS_LM75=yCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=yCONFIG_SENSORS_LM87=y
#CONFIG_SENSORS_LTC4215is not setCONFIG_SENSORS_LTC4245=yCONFIG_SENSORS_LM95241=y
#CONFIG_SENSORS_MAX1619is not set
#CONFIG_SENSORS_MAX6650is not setCONFIG_SENSORS_PC87360=yCONFIG_SENSORS_PC87427=yCONFIG_SENSORS_PCF8591=yCONFIG_SENSORS_SIS5595=y
#CONFIG_SENSORS_DME1737is not set
#CONFIG_SENSORS_SMSC47M1is not setCONFIG_SENSORS_SMSC47M192=yCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_TMP401=yCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=yCONFIG_SENSORS_VT8231=y
#CONFIG_SENSORS_W83781Dis not setCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=y
#CONFIG_SENSORS_W83793is not setCONFIG_SENSORS_W83L785TS=yCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_W83627HF=yCONFIG_SENSORS_W83627EHF=yCONFIG_SENSORS_HDAPS=yCONFIG_SENSORS_APPLESMC=y
#CONFIG_HWMON_DEBUG_CHIPis not setCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y
#CONFIG_WATCHDOGis not setCONFIG_SSB_POSSIBLE=y#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
#CONFIG_SSB_B43_PCI_BRIDGEis not setCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_SM501=y
#CONFIG_HTC_PASIC3is not set
#CONFIG_TWL4030_COREis not set
#CONFIG_MFD_TMIOis not setCONFIG_PMIC_DA903X=yCONFIG_MFD_WM8400=y
#CONFIG_MFD_PCF50633is not setCONFIG_AB3100_CORE=yCONFIG_REGULATOR=y
#CONFIG_REGULATOR_DEBUGis not set
#CONFIG_REGULATOR_FIXED_VOLTAGEis not setCONFIG_REGULATOR_VIRTUAL_CONSUMER=yCONFIG_REGULATOR_USERSPACE_CONSUMER=yCONFIG_REGULATOR_BQ24022=y
#CONFIG_REGULATOR_MAX1586is not setCONFIG_REGULATOR_WM8400=yCONFIG_REGULATOR_DA903X=yCONFIG_REGULATOR_LP3971=yCONFIG_MEDIA_SUPPORT=y#
# Multimedia core support
#
#CONFIG_VIDEO_DEVis not set
#CONFIG_DVB_COREis not set
#CONFIG_VIDEO_MEDIAis not set#
# Multimedia drivers
#
#CONFIG_DABis not set#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_ALI=yCONFIG_AGP_ATI=y
#CONFIG_AGP_AMDis not setCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
#CONFIG_AGP_NVIDIAis not setCONFIG_AGP_SIS=y
#CONFIG_AGP_SWORKSis not set
#CONFIG_AGP_VIAis not setCONFIG_AGP_EFFICEON=yCONFIG_DRM=yCONFIG_DRM_TDFX=yCONFIG_DRM_R128=y
#CONFIG_DRM_RADEONis not setCONFIG_DRM_I810=y
#CONFIG_DRM_I830is not set
#CONFIG_DRM_I915is not set
#CONFIG_DRM_MGAis not set
#CONFIG_DRM_SISis not set
#CONFIG_DRM_VIAis not setCONFIG_DRM_SAVAGE=y
#CONFIG_VGASTATEis not setCONFIG_VIDEO_OUTPUT_CONTROL=y
#CONFIG_FBis not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
#CONFIG_LCD_CLASS_DEVICEis not set
#CONFIG_BACKLIGHT_CLASS_DEVICEis not set#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y#
# Display hardware drivers
##
# Console display driver support
#CONFIG_VGA_CONSOLE=y
#CONFIG_VGACON_SOFT_SCROLLBACKis not setCONFIG_DUMMY_CONSOLE=y
#CONFIG_SOUNDis not setCONFIG_HID_SUPPORT=yCONFIG_HID=y
#CONFIG_HID_DEBUGis not set
#CONFIG_HIDRAWis not set#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=yCONFIG_USB_MOUSE=y#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_APPLE=y
#CONFIG_HID_BELKINis not setCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=y
#CONFIG_HID_CYPRESSis not set
#CONFIG_HID_DRAGONRISEis not setCONFIG_HID_EZKEY=yCONFIG_HID_KYE=y
#CONFIG_HID_GYRATIONis not set
#CONFIG_HID_KENSINGTONis not setCONFIG_HID_LOGITECH=yCONFIG_LOGITECH_FF=y
#CONFIG_LOGIRUMBLEPAD2_FFis not set
#CONFIG_HID_MICROSOFTis not setCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=yCONFIG_PANTHERLORD_FF=y
#CONFIG_HID_PETALYNXis not set
#CONFIG_HID_SAMSUNGis not setCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=yCONFIG_HID_GREENASIA=yCONFIG_GREENASIA_FF=yCONFIG_HID_SMARTJOYPLUS=yCONFIG_SMARTJOYPLUS_FF=y
#CONFIG_HID_TOPSEEDis not setCONFIG_HID_THRUSTMASTER=y
#CONFIG_THRUSTMASTER_FFis not setCONFIG_HID_ZEROPLUS=yCONFIG_ZEROPLUS_FF=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y#
# Miscellaneous USB options
#
#CONFIG_USB_DEVICEFSis not setCONFIG_USB_DEVICE_CLASS=y
#CONFIG_USB_DYNAMIC_MINORSis not set
#CONFIG_USB_OTGis not setCONFIG_USB_OTG_WHITELIST=y
#CONFIG_USB_OTG_BLACKLIST_HUBis not setCONFIG_USB_MON=y
#CONFIG_USB_WUSBis not set
#CONFIG_USB_WUSB_CBAFis not set#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=y
#CONFIG_USB_XHCI_HCDis not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
#CONFIG_USB_EHCI_TT_NEWSCHEDis not set
#CONFIG_USB_OXU210HP_HCDis not set
#CONFIG_USB_ISP116X_HCDis not setCONFIG_USB_ISP1760_HCD=yCONFIG_USB_OHCI_HCD=y
#CONFIG_USB_OHCI_HCD_SSBis not set
#CONFIG_USB_OHCI_BIG_ENDIAN_DESCis not set
#CONFIG_USB_OHCI_BIG_ENDIAN_MMIOis not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
#CONFIG_USB_U132_HCDis not setCONFIG_USB_SL811_HCD=yCONFIG_USB_R8A66597_HCD=y
#CONFIG_USB_HWA_HCDis not set#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y#
# NOTE:USB_STORAGEdepends on SCSI butBLK_DEV_SDmay ##
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y#
# USB port drivers
#CONFIG_USB_USS720=yCONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_EZUSB=y
#CONFIG_USB_SERIAL_GENERICis not set
#CONFIG_USB_SERIAL_AIRCABLEis not setCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
#CONFIG_USB_SERIAL_CP210Xis not setCONFIG_USB_SERIAL_CYPRESS_M8=y
#CONFIG_USB_SERIAL_EMPEGis not setCONFIG_USB_SERIAL_FTDI_SIO=y
#CONFIG_USB_SERIAL_FUNSOFTis not setCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=yCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=y
#CONFIG_USB_SERIAL_GARMINis not setCONFIG_USB_SERIAL_IPW=yCONFIG_USB_SERIAL_IUU=yCONFIG_USB_SERIAL_KEYSPAN_PDA=y
#CONFIG_USB_SERIAL_KEYSPANis not set
#CONFIG_USB_SERIAL_KLSIis not set
#CONFIG_USB_SERIAL_KOBIL_SCTis not setCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_MOTOROLA=y
#CONFIG_USB_SERIAL_NAVMANis not set
#CONFIG_USB_SERIAL_PL2303is not setCONFIG_USB_SERIAL_OTI6858=y
#CONFIG_USB_SERIAL_QUALCOMMis not set
#CONFIG_USB_SERIAL_SPCP8X5is not set
#CONFIG_USB_SERIAL_HP4Xis not set
#CONFIG_USB_SERIAL_SAFEis not setCONFIG_USB_SERIAL_SIEMENS_MPI=yCONFIG_USB_SERIAL_SIERRAWIRELESS=y
#CONFIG_USB_SERIAL_SYMBOLis not set
#CONFIG_USB_SERIAL_TIis not set
#CONFIG_USB_SERIAL_CYBERJACKis not set
#CONFIG_USB_SERIAL_XIRCOMis not set
#CONFIG_USB_SERIAL_OPTIONis not setCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_OPTICON=y
#CONFIG_USB_SERIAL_DEBUGis not set#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=y
#CONFIG_USB_SEVSEGis not setCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=y
#CONFIG_USB_LCDis not setCONFIG_USB_BERRY_CHARGE=y
#CONFIG_USB_LEDis not set
#CONFIG_USB_CYPRESS_CY7C63is not setCONFIG_USB_CYTHERM=y
#CONFIG_USB_IDMOUSEis not setCONFIG_USB_FTDI_ELAN=y
#CONFIG_USB_APPLEDISPLAYis not setCONFIG_USB_SISUSBVGA=y
#CONFIG_USB_SISUSBVGA_CONis not set
#CONFIG_USB_LDis not setCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=yCONFIG_USB_ISIGHTFW=y
#CONFIG_USB_VSTis not set
#CONFIG_USB_ATMis not set#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_NOP_USB_XCEIV=y
#CONFIG_UWBis not set
#CONFIG_MMCis not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=yCONFIG_MSPRO_BLOCK=y#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=y
#CONFIG_MEMSTICK_JMICRON_38Xis not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y#
# LED drivers
#
#CONFIG_LEDS_NET48XXis not setCONFIG_LEDS_WRAP=yCONFIG_LEDS_ALIX2=y
#CONFIG_LEDS_PCA9532is not setCONFIG_LEDS_LP3944=yCONFIG_LEDS_CLEVO_MAIL=yCONFIG_LEDS_PCA955X=y
#CONFIG_LEDS_DA903Xis not setCONFIG_LEDS_BD2802=y#
# LED Triggers
#
#CONFIG_LEDS_TRIGGERSis not setCONFIG_ACCESSIBILITY=yCONFIG_A11Y_BRAILLE_CONSOLE=yCONFIG_INFINIBAND=y
#CONFIG_INFINIBAND_USER_MADis not set
#CONFIG_INFINIBAND_USER_ACCESSis not setCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=yCONFIG_INFINIBAND_MTHCA_DEBUG=yCONFIG_INFINIBAND_AMSO1100=yCONFIG_INFINIBAND_AMSO1100_DEBUG=yCONFIG_INFINIBAND_CXGB3=y
#CONFIG_INFINIBAND_CXGB3_DEBUGis not setCONFIG_MLX4_INFINIBAND=yCONFIG_INFINIBAND_NES=y
#CONFIG_INFINIBAND_NES_DEBUGis not setCONFIG_INFINIBAND_IPOIB=yCONFIG_INFINIBAND_IPOIB_CM=yCONFIG_INFINIBAND_IPOIB_DEBUG=yCONFIG_INFINIBAND_IPOIB_DEBUG_DATA=yCONFIG_INFINIBAND_SRP=yCONFIG_INFINIBAND_ISER=yCONFIG_EDAC=y#
# Reporting subsystems
#
#CONFIG_EDAC_DEBUGis not setCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_AMD76X=y
#CONFIG_EDAC_E7XXXis not set
#CONFIG_EDAC_E752Xis not set
#CONFIG_EDAC_I82875Pis not setCONFIG_EDAC_I82975X=yCONFIG_EDAC_I3000=yCONFIG_EDAC_X38=y
#CONFIG_EDAC_I5400is not setCONFIG_EDAC_I82860=yCONFIG_EDAC_R82600=yCONFIG_EDAC_I5000=yCONFIG_EDAC_I5100=y
#CONFIG_RTC_CLASSis not setCONFIG_DMADEVICES=y#
# DMA Devices
#CONFIG_INTEL_IOATDMA=yCONFIG_DMA_ENGINE=y#
# DMA Clients
#
#CONFIG_NET_DMAis not setCONFIG_ASYNC_TX_DMA=yCONFIG_DMATEST=yCONFIG_DCA=yCONFIG_AUXDISPLAY=yCONFIG_KS0108=yCONFIG_KS0108_PORT=0x378CONFIG_KS0108_DELAY=2CONFIG_UIO=yCONFIG_UIO_CIF=y
#CONFIG_UIO_PDRVis not setCONFIG_UIO_PDRV_GENIRQ=yCONFIG_UIO_SMX=y
#CONFIG_UIO_AECis not setCONFIG_UIO_SERCOS3=y#
# TI VLYNQ
#
#CONFIG_X86_PLATFORM_DEVICESis not set#
# Firmware Drivers
#
#CONFIG_EDDis not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=y
#CONFIG_ISCSI_IBFTis not set#
# File systems
#CONFIG_EXT2_FS=y
#CONFIG_EXT2_FS_XATTRis not setCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
#CONFIG_EXT4_FSis not setCONFIG_FS_XIP=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=yCONFIG_REISERFS_CHECK=yCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=y
#CONFIG_REISERFS_FS_SECURITYis not setCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=y
#CONFIG_XFS_QUOTAis not setCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=y
#CONFIG_OCFS2_FSis not setCONFIG_BTRFS_FS=y
#CONFIG_BTRFS_FS_POSIX_ACLis not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
#CONFIG_DNOTIFYis not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
#CONFIG_PRINT_QUOTA_WARNINGis not setCONFIG_QUOTA_TREE=y
#CONFIG_QFMT_V1is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_GENERIC_ACL=y#
# Caches
#CONFIG_FSCACHE=yCONFIG_FSCACHE_STATS=yCONFIG_FSCACHE_HISTOGRAM=yCONFIG_FSCACHE_DEBUG=yCONFIG_CACHEFILES=y
#CONFIG_CACHEFILES_DEBUGis not setCONFIG_CACHEFILES_HISTOGRAM=y#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
#CONFIG_UDF_FSis not set#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y#
# Pseudo filesystems
#CONFIG_PROC_FS=y
#CONFIG_PROC_KCOREis not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
#CONFIG_MISC_FILESYSTEMSis not set
#CONFIG_NETWORK_FILESYSTEMSis not setCONFIG_EXPORTFS=y#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
#CONFIG_ACORN_PARTITION_CUMANAis not setCONFIG_ACORN_PARTITION_EESOX=yCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=y
#CONFIG_ACORN_PARTITION_POWERTECis not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
#CONFIG_LDM_PARTITIONis not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=y
#CONFIG_SUN_PARTITIONis not setCONFIG_KARMA_PARTITION=y
#CONFIG_EFI_PARTITIONis not setCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=y
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not setCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=y
#CONFIG_NLS_CODEPAGE_862is not setCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=y
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not setCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=y
#CONFIG_NLS_CODEPAGE_932is not setCONFIG_NLS_CODEPAGE_949=y
#CONFIG_NLS_CODEPAGE_874is not setCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=y
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=y
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not setCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=yCONFIG_DLM=yCONFIG_DLM_DEBUG=y#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#CONFIG_PRINTK_TIMEis not setCONFIG_ALLOW_WARNINGS=y
#CONFIG_ENABLE_WARN_DEPRECATEDis not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
#CONFIG_BOOTPARAM_SOFTLOCKUP_PANICis not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
#CONFIG_DETECT_HUNG_TASKis not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
#CONFIG_TIMER_STATSis not setCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=yCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
#CONFIG_SLUB_DEBUG_ONis not set
#CONFIG_SLUB_STATSis not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=yCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
#CONFIG_DEBUG_LOCKING_API_SELFTESTSis not setCONFIG_STACKTRACE=y
#CONFIG_DEBUG_HIGHMEMis not set
#CONFIG_DEBUG_BUGVERBOSEis not setCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=y
#CONFIG_DEBUG_LISTis not setCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=yCONFIG_RCU_TORTURE_TEST=yCONFIG_RCU_TORTURE_TEST_RUNNABLE=yCONFIG_RCU_CPU_STALL_DETECTOR=y
#CONFIG_BACKTRACE_SELF_TESTis not setCONFIG_FAULT_INJECTION=y
#CONFIG_FAILSLABis not setCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=y
#CONFIG_FAIL_IO_TIMEOUTis not setCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=yCONFIG_LATENCYTOP=y
#CONFIG_SYSCTL_SYSCALL_CHECKis not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=y
#CONFIG_IRQSOFF_TRACERis not setCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=y
#CONFIG_BOOT_TRACERis not setCONFIG_BRANCH_PROFILE_NONE=y
#CONFIG_PROFILE_ANNOTATED_BRANCHESis not set
#CONFIG_PROFILE_ALL_BRANCHESis not set
#CONFIG_POWER_TRACERis not set
#CONFIG_KSYM_TRACERis not setCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=y
#CONFIG_WORKQUEUE_TRACERis not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=y
#CONFIG_FUNCTION_PROFILERis not setCONFIG_FTRACE_MCOUNT_RECORD=y
#CONFIG_FTRACE_STARTUP_TESTis not set
#CONFIG_MMIOTRACEis not setCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
#CONFIG_FIREWIRE_OHCI_REMOTE_DMAis not setCONFIG_BUILD_DOCSRC=yCONFIG_DYNAMIC_DEBUG=yCONFIG_DMA_API_DEBUG=yCONFIG_SAMPLES=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=y
#CONFIG_KGDB_SERIAL_CONSOLEis not setCONFIG_KGDB_TESTS=yCONFIG_HAVE_ARCH_KMEMCHECK=y
#CONFIG_STRICT_DEVMEMis not set
#CONFIG_X86_VERBOSE_BOOTUPis not setCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=y
#CONFIG_DEBUG_STACKOVERFLOWis not setCONFIG_DEBUG_STACK_USAGE=yCONFIG_DEBUG_PER_CPU_MAPS=y
#CONFIG_X86_PTDUMPis not set
#CONFIG_DEBUG_RODATAis not set
#CONFIG_4KSTACKSis not setCONFIG_DOUBLEFAULT=y
#CONFIG_IOMMU_STRESSis not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
#CONFIG_IO_DELAY_0XEDis not set
#CONFIG_IO_DELAY_UDELAYis not set
#CONFIG_IO_DELAY_NONEis not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
#CONFIG_CPA_DEBUGis not set
#CONFIG_OPTIMIZE_INLININGis not set#
# Security options
#CONFIG_KEYS=y
#CONFIG_KEYS_DEBUG_PROC_KEYSis not setCONFIG_SECURITY=yCONFIG_SECURITYFS=y
#CONFIG_SECURITY_NETWORKis not setCONFIG_SECURITY_PATH=yCONFIG_SECURITY_FILE_CAPABILITIES=yCONFIG_SECURITY_TOMOYO=yCONFIG_CRYPTO=y#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=y
#CONFIG_CRYPTO_CRYPTDis not setCONFIG_CRYPTO_AUTHENC=y#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=y
#CONFIG_CRYPTO_GCMis not setCONFIG_CRYPTO_SEQIV=y#
# Block modes
#
#CONFIG_CRYPTO_CBCis not setCONFIG_CRYPTO_CTR=y
#CONFIG_CRYPTO_CTSis not setCONFIG_CRYPTO_ECB=y
#CONFIG_CRYPTO_LRWis not setCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=y
#CONFIG_CRYPTO_MD4is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
#CONFIG_CRYPTO_RMD128is not setCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=y
#CONFIG_CRYPTO_SHA256is not set
#CONFIG_CRYPTO_SHA512is not set
#CONFIG_CRYPTO_TGR192is not setCONFIG_CRYPTO_WP512=y#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=y
#CONFIG_CRYPTO_BLOWFISHis not setCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=y
#CONFIG_CRYPTO_CAST6is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y
#CONFIG_CRYPTO_SALSA20is not set
#CONFIG_CRYPTO_SALSA20_586is not set
#CONFIG_CRYPTO_SEEDis not setCONFIG_CRYPTO_SERPENT=y
#CONFIG_CRYPTO_TEAis not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=y
#CONFIG_CRYPTO_LZOis not set#
# Random Number Generation
#
#CONFIG_CRYPTO_ANSI_CPRNGis not setCONFIG_CRYPTO_HW=y
#CONFIG_CRYPTO_DEV_PADLOCKis not set
#CONFIG_CRYPTO_DEV_GEODEis not setCONFIG_CRYPTO_DEV_HIFN_795X=yCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=yCONFIG_KVM_INTEL=y
#CONFIG_KVM_AMDis not set
#CONFIG_KVM_TRACEis not setCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=y
#CONFIG_VIRTIO_PCIis not setCONFIG_VIRTIO_BALLOON=yCONFIG_BINARY_PRINTF=y#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=yCONFIG_X86_32_ALWAYS_ON=y
Quoted 72 lines · Paul E. McKenney
Quoted 12 lines · Ingo Molnar
Quoted 9 lines · tip-bot for Paul E. McKenney
Commit-ID: 7256cf0e83bf018be8a81806593aaef7f2437f0b Gitweb: http://git.kernel.org/tip/7256cf0e83bf018be8a81806593aaef7f2437f0b Author: Paul E. McKenney <[email protected]> AuthorDate: Sun, 2 Aug 2009 10:21:10 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sun, 2 Aug 2009 21:31:28 +0200rcu: Add diagnostic check for a possible CPU-hotplug race
Quoted 8 lines
Quoted 6 lines
Complain if the RCU softirq code ever runs on a CPU that has not yet been announced to RCU as being online.
Signed-off-by Paul E. McKenney <[email protected]>LKML-Reference: <new-submission>
Signed-off-by Ingo Molnar <[email protected]>FYI, the new warning triggered in -tip testing:
Yow!!! I never was able to get this to trigger... Of course, I never was able to reproduce the original problem, either.
Just so you know, one of the reasons it took me so long to come up with the fix is that this just isn't supposed to happen. Where I grew up, CPUs were supposed to come online -before- starting to handle softirqs. ;-)
Here is my reasoning:
o
rcu_init(), which is invoked before a second CPU can possibly
come online, callshotplug_notifier(), which causesrcu_barrier_cpu_hotplug()to be invoked in response to any CPU-hotplug event.o We know
rcu_init()really was called, because otherwise
open_softirq(RCU_SOFTIRQ)never gets called, so the softirq would never have happened. In addition, there should be a "Hierarchical RCU implementation" message in your bootlog. (Is there?)o
rcu_barrier_cpu_hotplug()unconditionally invokes
rcu_cpu_notify()on every CPU-hotplug event.o
rcu_cpu_notify()invokesrcu_online_cpu()in response to
anyCPU_UP_PREPAREorCPU_UP_PREPARE_FROZENCPU-hotplug event.o The
CPU_UP_PREPAREandCPU_UP_PREPARE_FROZENCPU-hotplug events
happen before the CPU in question is capable of running any code.o This looks to be the first onlining of this CPU during boot
(right?). So we cannot possibly have some strange situation where the end of the prior CPU-offline event overlaps with the current CPU-online event. (Yes, this isn't supposed to happen courtesy of CPU-hotplug locking, but impossibility is clearly no reason to dismiss possible scenarios for -this- particular bug.)o Therefore the
WARN_ON_ONCE()cannot possibly trigger.This would be a convincing argument, aside from the fact that you really did make it trigger. So first, anything I am missing in the above? If not, could you please help me with the following, at least if the answers are readily available?
o Is rcu_init()'s "Hierarchical RCU implementation" log message
in your bootlog?o Is
_cpu_up()really being called, and, if so, is it really
invoking__raw_notifier_call_chain()withCPU_UP_PREPARE?
Quoted 6 lines
o Is this really during initial boot, or am I misreading your
bootlog? (The other reason I believe that this happened on the first CPU-online for this CPU is that ->beenonline, once set, is never cleared.)Gautham, any thoughts on what might be happening here?
And on the off-chance that someone is stomping on the notifier chain... Untested, probably does not compile. Diagnostic only, not for inclusion. If this doesn't trigger the WARN_ON_ONCE() added to rcu_init(), the idea would be to move the WARN_ON_ONCE() to rcu_process_callbacks(). If it does trigger there, then my guess would be that either someone is unregistering the RCU CPU-hotplug notifier or directly corrupting the notifier chain.
---
include/linux/cpu.h | 3 +++ kernel/cpu.c | 5 +++++ kernel/notifier.c | 15 +++++++++++++++ kernel/rcupdate.c | 3 ++- 4 files changed, 25 insertions(+), 1 deletion(-)
include/linux/cpu.h +3 -0
@@ -51,6 +51,9 @@ struct notifier_block;#ifdef CONFIG_HOTPLUG_CPU extern int register_cpu_notifier (struct notifier_block *nb);extern void unregister_cpu_notifier (struct notifier_block *nb); +extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)); +extern int notifier_chain_is_registered (struct notifier_block *nl, +int (*fn)(struct notifier_block *,unsigned long ,void *));#else #ifndef MODULE
kernel/cpu.c +5 -0
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)return ret; } +int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return notifier_chain_is_registered (&cpu_chain, fn); +} +#ifdef CONFIG_HOTPLUG_CPU EXPORT_SYMBOL (register_cpu_notifier);
kernel/notifier.c +15 -0
@@ -59,6 +59,21 @@ static int notifier_chain_unregister(struct notifier_block **nl,return -ENOENT ; } +int notifier_chain_is_registered (struct notifier_block *nl, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +rcu_read_lock (); +while (nl !=NULL ) { +if (rcu_dereference (nl)->notifier_call == fn) { +rcu_read_unlock (); +return 0 ; + } + nl = &(rcu_dereference (nl)->next); + } +rcu_read_unlock (); +return -ENOENT ; +} +/** * notifier_call_chain - Informs the registered notifiers about an event. * @nl: Pointer to head of the blocking notifier chain
kernel/rcupdate.c +2 -1
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)extern int rcu_cpu_notify (struct notifier_block *self,unsigned long action,void *hcpu); -static int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self, +int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self,unsigned long action,void *hcpu) {rcu_cpu_notify (self, action, hcpu);
@@ -249,6 +249,7 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,void __init rcu_init (void ) {hotcpu_notifier (rcu_barrier_cpu_hotplug,0 ); +WARN_ON_ONCE (!cpu_notified (rcu_barrier_cpu_hotplug));__rcu_init (); }
i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?
Let me know if you still would like me to run your diagnostic patch too.
Ingo
[ 0.000000] Linux version 2.6.31-rc5-tip (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #291 SMP PREEMPT Sun Aug 2 22:49:56 CEST 2009 [ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 nolapic_timer hpet=disable idle=poll highmem=512m nopat acpi=off pci=nomsi [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] using polling idle threads. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] 0000000000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] NODE_DATA [0000000000008000 - 0000000000046fff] [ 0.000000] bootmap [0000000000047000 - 000000000004efff] pages 8 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00033f8d90] TEXT DATA BSS ==> [0001000000 - 00033f8d90] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0000100000 - 0000300000] PGTABLE ==> [0000100000 - 0000300000] [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680 [ 0.000000] mpc: f1400-f152c [ 0.000000] [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880003800000-ffff880004dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262026 [ 0.000000] DMA zone: 88 pages used for memmap [ 0.000000] DMA zone: 611 pages reserved [ 0.000000] DMA zone: 3295 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5544 pages used for memmap [ 0.000000] DMA32 zone: 252488 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is PCI [ 0.000000] Bus #6 is ISA [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff88000347c000, static data 95072 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255783 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 nolapic_timer hpet=disable idle=poll highmem=512m nopat acpi=off pci=nomsi [ 0.000000] debug: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 985624k/1048512k available (15196k kernel code, 408k absent, 62480k reserved, 9977k data, 868k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.639 MHz processor. [ 0.000015] spurious 8259A interrupt: IRQ7. [ 0.006744] Console: colour VGA+ 80x25 [ 0.010000] console [ttyS0] enabled, bootconsole disabled [ 0.010000] console [ttyS0] enabled, bootconsole disabled [ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.010000] ... MAX_LOCK_DEPTH: 48 [ 0.010000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.010000] ... CLASSHASH_SIZE: 4096 [ 0.010000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.010000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.010000] ... CHAINHASH_SIZE: 16384 [ 0.010000] memory used by lock dependency info: 5823 kB [ 0.010000] per task-struct memory footprint: 1920 bytes [ 0.010000] ------------------------ [ 0.010000] | Locking API testsuite: [ 0.010000] ---------------------------------------------------------------------------- [ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.010000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] recursive read-lock: | ok | |failed| [ 0.010000] recursive read-lock #2: | ok | |failed| [ 0.010000] mixed read-write-lock: |failed| |failed| [ 0.010000] mixed write-read-lock: |failed| |failed| [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.010000] hard-irq read-recursion/123: ok | [ 0.010000] soft-irq read-recursion/123: ok | [ 0.010000] hard-irq read-recursion/132: ok | [ 0.010000] soft-irq read-recursion/132: ok | [ 0.010000] hard-irq read-recursion/213: ok | [ 0.010000] soft-irq read-recursion/213: ok | [ 0.010000] hard-irq read-recursion/231: ok | [ 0.010000] soft-irq read-recursion/231: ok | [ 0.010000] hard-irq read-recursion/312: ok | [ 0.010000] soft-irq read-recursion/312: ok | [ 0.010000] hard-irq read-recursion/321: ok | [ 0.010000] soft-irq read-recursion/321: ok | [ 0.010000] -------------------------------------------------------- [ 0.010000] 133 out of 218 testcases failed, as expected. | [ 0.010000] ---------------------------------------------------- [ 0.010000] ODEBUG: 11 of 11 active objects replaced [ 0.010000] ODEBUG: selftest passed [ 0.010013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.27 BogoMIPS (lpj=20106390) [ 0.020634] Security Framework initialized [ 0.024730] TOMOYO Linux initialized [ 0.028979] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.030924] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.040482] Mount-cache hash table entries: 256 [ 0.050722] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.057847] CPU: L2 Cache: 512K (64 bytes/line) [ 0.060006] CPU 0/0x0 -> Node 0 [ 0.063146] tseg: 0000000000 [ 0.066032] CPU: Physical Processor ID: 0 [ 0.070003] CPU: Processor Core ID: 0 [ 0.073660] mce: CPU supports 5 MCE banks [ 0.080899] debug: unmapping init memory ffffffff8289a000..ffffffff828ac000 [ 0.088243] Setting APIC routing to flat [ 0.090012] enabled ExtINT on CPU#0 [ 0.093548] ExtINT not setup in hardware but reported by MP table [ 0.100094] ENABLING IO-APIC IRQs [ 0.103408] init IO_APIC IRQs [ 0.106371] 2-0 (apicid-pin) not connected [ 0.110021] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.117334] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.120014] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 0.127323] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 0.130000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 0.130000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.130000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.130000] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.130000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.130000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.130000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.130000] ..... (found apic 0 pin 0) ... [ 0.232854] ....... works. [ 0.235555] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.241237] Disabling APIC timer [ 0.250011] calling migration_init+0x0/0x7f @ 1 [ 0.254802] initcall migration_init+0x0/0x7f returned 0 after 0 usecs [ 0.260006] calling spawn_ksoftirqd+0x0/0x7f @ 1 [ 0.264792] initcall spawn_ksoftirqd+0x0/0x7f returned 0 after 0 usecs [ 0.270006] calling init_call_single_data+0x0/0xd5 @ 1 [ 0.275234] initcall init_call_single_data+0x0/0xd5 returned 0 after 0 usecs [ 0.280005] calling spawn_softlockup_task+0x0/0x9b @ 1 [ 0.290126] initcall spawn_softlockup_task+0x0/0x9b returned 0 after 0 usecs [ 0.297160] calling relay_init+0x0/0x2d @ 1 [ 0.300005] initcall relay_init+0x0/0x2d returned 0 after 0 usecs [ 0.306096] calling tracer_alloc_buffers+0x0/0x2b6 @ 1 [ 0.310195] initcall tracer_alloc_buffers+0x0/0x2b6 returned 0 after 0 usecs [ 0.320005] calling init_trace_printk+0x0/0x2d @ 1 [ 0.324882] initcall init_trace_printk+0x0/0x2d returned 0 after 0 usecs [ 0.330004] calling trace_workqueue_early_init+0x0/0x164 @ 1 [ 0.335806] initcall trace_workqueue_early_init+0x0/0x164 returned 0 after 0 usecs [ 0.350022] lockdep: fixing up alternatives. [ 0.354423] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] masked ExtINT on CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4020.69 BogoMIPS (lpj=20103483) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.520258] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ [ 0.530009] ------------[ cut here ]------------ [ 0.530019] WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x4b/0x294() [ 0.530024] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #291 [ 0.530027] Call Trace: [ 0.530029] <IRQ> [<ffffffff810becbc>] ? __rcu_process_callbacks+0x4b/0x294 [ 0.530037] [<ffffffff8107c455>] warn_slowpath_common+0x68/0xab [ 0.530041] [<ffffffff8107c4bf>] warn_slowpath_null+0x27/0x3d [ 0.530045] [<ffffffff810becbc>] __rcu_process_callbacks+0x4b/0x294 [ 0.530050] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 0.530055] [<ffffffff810bef43>] rcu_process_callbacks+0x3e/0x76 [ 0.530059] [<ffffffff8108312a>] __do_softirq+0x12c/0x24b [ 0.530064] [<ffffffff8102f44c>] call_softirq+0x1c/0x28 [ 0.530068] [<ffffffff8103177a>] do_softirq+0x56/0xb3 [ 0.530073] [<ffffffff810a5442>] ? tick_handle_periodic+0x35/0x9b [ 0.530077] [<ffffffff8108274f>] irq_exit+0x57/0x7c [ 0.530083] [<ffffffff81047643>] smp_apic_timer_interrupt+0xa0/0xc6 [ 0.530088] [<ffffffff8102ee33>] apic_timer_interrupt+0x13/0x20 [ 0.530090] <EOI> [<ffffffff810374ca>] ? need_resched+0x53/0x54 [ 0.530098] [<ffffffff810375ac>] ? poll_idle+0x3c/0x5f [ 0.530102] [<ffffffff8102d376>] ? enter_idle+0x38/0x4e [ 0.530106] [<ffffffff8102d436>] ? cpu_idle+0xaa/0x110 [ 0.530112] [<ffffffff8290a187>] ? start_secondary+0x1c7/0x1e2 [ 0.530119] ---[ end trace 93d72a36b9146f22 ]--- [ 0.540003] stepping 02 [ 0.542554] Brought up 2 CPUs [ 0.550004] Total of 2 processors activated (8041.97 BogoMIPS). [ 0.556465] CPU0 attaching sched-domain: [ 0.560007] domain 0: span 0-1 level CPU [ 0.564032] groups: 0 1 [ 0.570008] CPU1 attaching sched-domain: [ 0.573934] domain 0: span 0-1 level CPU [ 0.577958] groups: 1 0 [ 0.581105] device: 'platform': device_add [ 0.585775] bus: 'platform': registered [ 0.589626] Registering sysdev class 'cpu' [ 0.590213] Registering sysdev class 'memory' [ 0.594788] Registering sys device of class 'memory' [ 0.600010] Registering sys device 'memory0' [ 0.604507] Registering sys device of class 'memory' [ 0.610008] Registering sys device 'memory1' [ 0.614511] Registering sys device of class 'memory' [ 0.620009] Registering sys device 'memory2' [ 0.624488] Registering sys device of class 'memory' [ 0.630008] Registering sys device 'memory3' [ 0.634469] Registering sys device of class 'memory' [ 0.640009] Registering sys device 'memory4' [ 0.644520] Registering sys device of class 'memory' [ 0.650008] Registering sys device 'memory5' [ 0.654481] Registering sys device of class 'memory' [ 0.660009] Registering sys device 'memory6' [ 0.664499] Registering sys device of class 'memory' [ 0.669460] Registering sys device 'memory7' [ 0.680699] calling init_cpufreq_transition_notifier_list+0x0/0x42 @ 1 [ 0.687308] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs [ 0.690006] calling net_ns_init+0x0/0x11b @ 1 [ 0.700016] initcall net_ns_init+0x0/0x11b returned 0 after 0 usecs [ 0.706277] calling cpufreq_tsc+0x0/0x28 @ 1 [ 0.710004] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs [ 0.716175] calling print_banner+0x0/0xe @ 1 [ 0.720035] Booting paravirtualized kernel on bare hardware [ 0.725605] initcall print_banner+0x0/0xe returned 0 after 0 usecs [ 0.730004] calling init_smp_flush+0x0/0x64 @ 1 [ 0.734617] initcall init_smp_flush+0x0/0x64 returned 0 after 0 usecs [ 0.740004] calling sysctl_init+0x0/0x59 @ 1 [ 0.744570] initcall sysctl_init+0x0/0x59 returned 0 after 0 usecs [ 0.750003] calling ksysfs_init+0x0/0xe4 @ 1 [ 0.754637] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs [ 0.760020] calling async_init+0x0/0x69 @ 1 [ 0.770004] initcall async_init+0x0/0x69 returned 0 after 0 usecs [ 0.776088] calling init_jiffies_clocksource+0x0/0x39 @ 1 [ 0.780008] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs [ 0.787309] calling init_hw_breakpoint+0x0/0x39 @ 1 [ 0.790006] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs [ 0.800027] calling filelock_init+0x0/0x55 @ 1 [ 0.804637] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs [ 0.810004] calling init_misc_binfmt+0x0/0x67 @ 1 [ 0.814800] initcall init_misc_binfmt+0x0/0x67 returned 0 after 0 usecs [ 0.820004] calling init_script_binfmt+0x0/0x3b @ 1 [ 0.824963] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.830004] calling init_elf_binfmt+0x0/0x3b @ 1 [ 0.834704] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.840019] calling init_compat_elf_binfmt+0x0/0x3b @ 1 [ 0.850004] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.857128] calling debugfs_init+0x0/0x80 @ 1 [ 0.860011] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs [ 0.866269] calling securityfs_init+0x0/0x77 @ 1 [ 0.870011] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs [ 0.880019] calling random32_init+0x0/0xff @ 1 [ 0.884547] initcall random32_init+0x0/0xff returned 0 after 0 usecs [ 0.890003] calling cpufreq_core_init+0x0/0xaa @ 1 [ 0.894878] initcall cpufreq_core_init+0x0/0xaa returned 0 after 0 usecs [ 0.900005] calling virtio_init+0x0/0x52 @ 1 [ 0.904567] bus: 'virtio': registered [ 0.910005] initcall virtio_init+0x0/0x52 returned 0 after 9765 usecs [ 0.916434] calling sock_init+0x0/0x80 @ 1 [ 0.920220] initcall sock_init+0x0/0x80 returned 0 after 0 usecs [ 0.926216] calling netpoll_init+0x0/0x69 @ 1 [ 0.930004] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs [ 0.936268] calling netlink_proto_init+0x0/0x169 @ 1 [ 0.940054] NET: Registered protocol family 16 [ 0.944557] initcall netlink_proto_init+0x0/0x169 returned 0 after 0 usecs [ 0.950027] calling bdi_class_init+0x0/0x68 @ 1 [ 0.954642] device class 'bdi': registering [ 0.960271] initcall bdi_class_init+0x0/0x68 returned 0 after 9765 usecs [ 0.970005] calling kobject_uevent_init+0x0/0x7b @ 1 [ 0.975070] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs [ 0.980004] calling gpiolib_sysfs_init+0x0/0xbc @ 1 [ 0.984961] device class 'gpio': registering [ 0.990252] initcall gpiolib_sysfs_init+0x0/0xbc returned 0 after 9765 usecs [ 0.997293] calling pcibus_class_init+0x0/0x40 @ 1 [ 1.000004] device class 'pci_bus': registering [ 1.004788] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs [ 1.010004] calling pci_driver_init+0x0/0x39 @ 1 [ 1.020227] bus: 'pci': registered [ 1.023630] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs [ 1.030005] calling lcd_class_init+0x0/0x74 @ 1 [ 1.034623] device class 'lcd': registering [ 1.039024] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs [ 1.040004] calling backlight_class_init+0x0/0x84 @ 1 [ 1.050003] device class 'backlight': registering [ 1.054907] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs [ 1.060005] calling tty_class_init+0x0/0x58 @ 1 [ 1.064617] device class 'tty': registering [ 1.070242] initcall tty_class_init+0x0/0x58 returned 0 after 9765 usecs [ 1.076936] calling vtconsole_class_init+0x0/0xe8 @ 1 [ 1.080005] device class 'vtconsole': registering [ 1.084930] device: 'vtcon0': device_add [ 1.090293] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 9765 usecs [ 1.100005] calling register_node_type+0x0/0xa4 @ 1 [ 1.104960] Registering sysdev class 'node' [ 1.109376] initcall register_node_type+0x0/0xa4 returned 0 after 0 usecs [ 1.110005] calling spi_init+0x0/0xd4 @ 1 [ 1.120238] bus: 'spi': registered [ 1.123635] device class 'spi_master': registering [ 1.128652] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs [ 1.130006] calling i2c_init+0x0/0x8c @ 1 [ 1.134334] bus: 'i2c': registered [ 1.140003] device class 'i2c-adapter': registering [ 1.145077] bus: 'i2c': add driver dummy [ 1.150253] initcall i2c_init+0x0/0x8c returned 0 after 19531 usecs [ 1.156512] calling amd_postcore_init+0x0/0xa3 @ 1 [ 1.160008] node 0 link 0: io port [1000, fffff] [ 1.164624] TOM: 0000000040000000 aka 1024M [ 1.170003] node 0 link 0: mmio [e0000000, efffffff] [ 1.174979] node 0 link 0: mmio [feb00000, fec0ffff] [ 1.180200] node 0 link 0: mmio [a0000, bffff] [ 1.184659] node 0 link 0: mmio [40000000, fed3ffff] [ 1.190215] bus: [00,ff] on node 0 link 0 [ 1.194224] bus: 00 index 0 io port: [0, ffff] [ 1.200003] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 1.205308] bus: 00 index 2 mmio: [feb00000, fec0ffff] [ 1.210003] bus: 00 index 3 mmio: [a0000, bffff] [ 1.214618] initcall amd_postcore_init+0x0/0xa3 returned 0 after 48828 usecs [ 1.220003] calling arch_kdebugfs_init+0x0/0x2a7 @ 1 [ 1.225086] initcall arch_kdebugfs_init+0x0/0x2a7 returned 0 after 0 usecs [ 1.230018] calling mtrr_if_init+0x0/0x8a @ 1 [ 1.234470] initcall mtrr_if_init+0x0/0x8a returned 0 after 0 usecs [ 1.240004] calling dma_bus_init+0x0/0x66 @ 1 [ 1.244442] device class 'dma': registering [ 1.250225] initcall dma_bus_init+0x0/0x66 returned 0 after 9765 usecs [ 1.260004] calling dma_channel_table_init+0x0/0x137 @ 1 [ 1.265409] initcall dma_channel_table_init+0x0/0x137 returned 0 after 0 usecs [ 1.270004] calling dca_init+0x0/0x45 @ 1 [ 1.274093] dca service started, version 1.8 [ 1.280017] device class 'dca': registering [ 1.284444] initcall dca_init+0x0/0x45 returned 0 after 9765 usecs [ 1.290005] calling pci_arch_init+0x0/0x67 @ 1 [ 1.294841] PCI: Using configuration type 1 for base access [ 1.300005] initcall pci_arch_init+0x0/0x67 returned 0 after 9765 usecs [ 1.306609] calling topology_init+0x0/0xe0 @ 1 [ 1.310003] Registering sys device of class 'node' [ 1.314793] Registering sys device 'node0' [ 1.320256] Registering sys device of class 'cpu' [ 1.324956] Registering sys device 'cpu0' [ 1.330286] Registering sys device of class 'cpu' [ 1.334992] Registering sys device 'cpu1' [ 1.340225] initcall topology_init+0x0/0xe0 returned 0 after 29296 usecs [ 1.346919] calling mtrr_init_finialize+0x0/0x64 @ 1 [ 1.350006] initcall mtrr_init_finialize+0x0/0x64 returned 0 after 0 usecs [ 1.356874] calling param_sysfs_init+0x0/0x37b @ 1 [ 1.579904] initcall param_sysfs_init+0x0/0x37b returned 0 after 205078 usecs [ 1.581017] calling init_slow_work+0x0/0x5f @ 1 [ 1.590005] initcall init_slow_work+0x0/0x5f returned 0 after 0 usecs [ 1.596434] calling default_bdi_init+0x0/0x5e @ 1 [ 1.600020] device: 'default': device_add [ 1.604377] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs [ 1.611124] calling init_bio+0x0/0x100 @ 1 [ 1.621337] bio: create slab <bio-0> at 0 [ 1.625444] initcall init_bio+0x0/0x100 returned 0 after 0 usecs [ 1.630925] calling fsnotify_init+0x0/0x39 @ 1 [ 1.635459] initcall fsnotify_init+0x0/0x39 returned 0 after 0 usecs [ 1.640005] calling fsnotify_notification_init+0x0/0x129 @ 1 [ 1.645853] initcall fsnotify_notification_init+0x0/0x129 returned 0 after 0 usecs [ 1.650026] calling cryptomgr_init+0x0/0x39 @ 1 [ 1.660005] initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs [ 1.666434] calling blk_settings_init+0x0/0x51 @ 1 [ 1.670004] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs [ 1.676694] calling blk_ioc_init+0x0/0x51 @ 1 [ 1.680043] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs [ 1.690019] calling blk_softirq_init+0x0/0x8f @ 1 [ 1.694805] initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs [ 1.700004] calling genhd_device_init+0x0/0x8c @ 1 [ 1.704875] device class 'block': registering [ 1.710394] initcall genhd_device_init+0x0/0x8c returned 0 after 9765 usecs [ 1.717344] calling gpiolib_debugfs_init+0x0/0x4b @ 1 [ 1.720122] initcall gpiolib_debugfs_init+0x0/0x4b returned 0 after 0 usecs [ 1.730004] calling max7301_init+0x0/0x39 @ 1 [ 1.734445] bus: 'spi': add driver max7301 [ 1.738825] initcall max7301_init+0x0/0x39 returned 0 after 0 usecs [ 1.740261] calling max732x_init+0x0/0x3b @ 1 [ 1.750054] bus: 'i2c': add driver max732x [ 1.754367] initcall max732x_init+0x0/0x3b returned 0 after 0 usecs [ 1.760045] calling mcp23s08_init+0x0/0x39 @ 1 [ 1.764571] bus: 'spi': add driver mcp23s08 [ 1.770071] initcall mcp23s08_init+0x0/0x39 returned 0 after 9765 usecs [ 1.776678] calling pcf857x_init+0x0/0x3b @ 1 [ 1.780003] bus: 'i2c': add driver pcf857x [ 1.784308] initcall pcf857x_init+0x0/0x3b returned 0 after 0 usecs [ 1.790005] calling gpio_twl4030_init+0x0/0x39 @ 1 [ 1.794874] bus: 'platform': add driver twl4030_gpio [ 1.800215] initcall gpio_twl4030_init+0x0/0x39 returned 0 after 9765 usecs [ 1.807173] calling pci_slot_init+0x0/0x73 @ 1 [ 1.810014] initcall pci_slot_init+0x0/0x73 returned 0 after 0 usecs [ 1.816364] calling misc_init+0x0/0xd6 @ 1 [ 1.820026] device class 'misc': registering [ 1.824517] initcall misc_init+0x0/0xd6 returned 0 after 0 usecs [ 1.830006] calling cn_init+0x0/0x11a @ 1 [ 1.834149] initcall cn_init+0x0/0x11a returned 0 after 0 usecs [ 1.840004] calling tifm_init+0x0/0xab @ 1 [ 1.844520] bus: 'tifm': registered [ 1.850003] device class 'tifm_adapter': registering [ 1.855186] initcall tifm_init+0x0/0xab returned 0 after 9765 usecs [ 1.860004] calling tps_init+0x0/0xa4 @ 1 [ 1.864094] tps65010: version 2 May 2005 [ 1.870003] bus: 'i2c': add driver tps65010 [ 1.874414] bus: 'i2c': remove driver tps65010 [ 1.880261] driver: 'tps65010': driver_release [ 1.900010] bus: 'i2c': add driver tps65010 [ 1.904449] bus: 'i2c': remove driver tps65010 [ 1.909082] driver: 'tps65010': driver_release [ 1.930062] bus: 'i2c': add driver tps65010 [ 1.934472] bus: 'i2c': remove driver tps65010 [ 1.939102] driver: 'tps65010': driver_release [ 1.940034] tps65010: no chip? [ 1.943090] initcall tps_init+0x0/0xa4 returned -19 after 78125 usecs [ 1.950004] calling twl4030_init+0x0/0x3b @ 1 [ 1.954441] bus: 'i2c': add driver twl4030 [ 1.960222] initcall twl4030_init+0x0/0x3b returned 0 after 9765 usecs [ 1.966739] calling da903x_init+0x0/0x3b @ 1 [ 1.970080] bus: 'i2c': add driver da903x [ 1.974311] initcall da903x_init+0x0/0x3b returned 0 after 0 usecs [ 1.980055] calling pcf50633_init+0x0/0x3b @ 1 [ 1.984579] bus: 'i2c': add driver pcf50633 [ 1.990239] initcall pcf50633_init+0x0/0x3b returned 0 after 9765 usecs [ 1.996841] calling init_scsi+0x0/0xb7 @ 1 [ 2.000790] device class 'scsi_host': registering [ 2.005987] bus: 'scsi': registered [ 2.010026] device class 'scsi_device': registering [ 2.015146] SCSI subsystem initialized [ 2.020023] initcall init_scsi+0x0/0xb7 returned 0 after 19531 usecs [ 2.026366] calling ata_init+0x0/0x3b3 @ 1 [ 2.030339] libata version 3.00 loaded. [ 2.034175] initcall ata_init+0x0/0x3b3 returned 0 after 0 usecs [ 2.040007] calling phy_init+0x0/0x57 @ 1 [ 2.044096] device class 'mdio_bus': registering [ 2.050458] bus: 'mdio_bus': registered [ 2.054295] bus: 'mdio_bus': add driver Generic PHY [ 2.060234] initcall phy_init+0x0/0x57 returned 0 after 19531 usecs [ 2.066495] calling usb_init+0x0/0x185 @ 1 [ 2.070256] bus: 'usb': registered [ 2.073668] bus: 'usb': add driver usbfs [ 2.077830] usbcore: registered new interface driver usbfs [ 2.080012] bus: 'usb': add driver hub [ 2.083986] usbcore: registered new interface driver hub [ 2.090089] bus: 'usb': add driver usb [ 2.094047] usbcore: registered new device driver usb [ 2.100005] initcall usb_init+0x0/0x185 returned 0 after 29296 usecs [ 2.106355] calling serio_init+0x0/0xb2 @ 1 [ 2.110238] bus: 'serio': registered [ 2.113894] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs [ 2.120005] calling gameport_init+0x0/0xb2 @ 1 [ 2.124806] bus: 'gameport': registered [ 2.130088] initcall gameport_init+0x0/0xb2 returned 0 after 9765 usecs [ 2.136693] calling input_init+0x0/0x15d @ 1 [ 2.140004] device class 'input': registering [ 2.144608] initcall input_init+0x0/0x15d returned 0 after 0 usecs [ 2.150005] calling pps_init+0x0/0xd7 @ 1 [ 2.154096] device class 'pps': registering [ 2.160205] LinuxPPS API ver. 1 registered [ 2.164295] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 2.170006] initcall pps_init+0x0/0xd7 returned 0 after 19531 usecs [ 2.180003] calling power_supply_class_init+0x0/0x5f @ 1 [ 2.185396] device class 'power_supply': registering [ 2.190207] initcall power_supply_class_init+0x0/0x5f returned 0 after 9765 usecs [ 2.197681] calling thermal_init+0x0/0x7e @ 1 [ 2.200008] device class 'thermal': registering [ 2.204802] initcall thermal_init+0x0/0x7e returned 0 after 0 usecs [ 2.210004] calling mmc_init+0x0/0x9c @ 1 [ 2.214432] bus: 'mmc': registered [ 2.220004] device class 'mmc_host': registering [ 2.225103] bus: 'sdio': registered [ 2.230005] initcall mmc_init+0x0/0x9c returned 0 after 19531 usecs [ 2.236260] calling leds_init+0x0/0x67 @ 1 [ 2.240004] device class 'leds': registering [ 2.244485] initcall leds_init+0x0/0x67 returned 0 after 0 usecs [ 2.250006] calling ac97_bus_init+0x0/0x39 @ 1 [ 2.254789] bus: 'ac97': registered [ 2.258279] initcall ac97_bus_init+0x0/0x39 returned 0 after 0 usecs [ 2.260005] calling pci_subsys_init+0x0/0x136 @ 1 [ 2.270002] PCI: Probing PCI hardware [ 2.273683] PCI: Probing PCI hardware (bus 00) [ 2.278136] device: 'pci0000:00': device_add [ 2.280020] device: '0000:00': device_add [ 2.284259] PCI: Scanning bus 0000:00 [ 2.290058] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00 [ 2.297060] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.300054] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00 [ 2.310030] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xec [ 2.316634] HPET not enabled in BIOS. You might try hpet=force boot option [ 2.320004] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.330045] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00 [ 2.337007] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 2.340015] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 2.350006] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 2.355749] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1dd [ 2.360013] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 2.365837] pci 0000:00:01.1: PME# disabled [ 2.370048] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00 [ 2.380014] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff] [ 2.386731] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.390012] pci 0000:00:02.0: supports D1 D2 [ 2.394276] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.400004] pci 0000:00:02.0: PME# disabled [ 2.404204] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00 [ 2.410033] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 2.420023] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1dd [ 2.426727] pci 0000:00:02.1: supports D1 D2 [ 2.430003] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 2.440004] pci 0000:00:02.1: PME# disabled [ 2.444216] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00 [ 2.450029] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff] [ 2.455770] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff] [ 2.460009] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff] [ 2.466719] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.470012] pci 0000:00:04.0: supports D1 D2 [ 2.480025] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00 [ 2.487000] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 2.490028] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.500033] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01 [ 2.507001] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.510023] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00 [ 2.520014] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff] [ 2.526706] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007] [ 2.530036] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.536738] pci 0000:00:0a.0: supports D1 D2 [ 2.540003] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.550004] pci 0000:00:0a.0: PME# disabled [ 2.554250] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01 [ 2.560021] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.566728] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.570019] pci 0000:00:0b.0: PME# disabled [ 2.574228] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01 [ 2.580020] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.590020] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.596626] pci 0000:00:0c.0: PME# disabled [ 2.600030] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01 [ 2.610035] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.616744] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.620004] pci 0000:00:0d.0: PME# disabled [ 2.624209] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01 [ 2.630020] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.640030] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.646633] pci 0000:00:0e.0: PME# disabled [ 2.650056] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00 [ 2.660024] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.666744] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00 [ 2.670024] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1dd [ 2.680019] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00 [ 2.686991] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1dd [ 2.690034] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00 [ 2.700023] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1dd [ 2.706740] PCI: Fixups for bus 0000:00 [ 2.710005] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0 [ 2.716964] PCI: Scanning bus 0000:05 [ 2.720035] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00 [ 2.727005] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff] [ 2.730022] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff] [ 2.740027] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.746731] pci 0000:05:07.0: supports D1 D2 [ 2.750003] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 2.755743] pci 0000:05:07.0: PME# disabled [ 2.760047] PCI: Fixups for bus 0000:05 [ 2.763880] pci 0000:00:09.0: transparent bridge [ 2.770019] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 2.775759] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 2.780004] PCI: Bus scan for 0000:05 returning with max=05 [ 2.785571] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0 [ 2.790012] PCI: Scanning bus 0000:04 [ 2.800056] PCI: Fixups for bus 0000:04 [ 2.803895] PCI: Bus scan for 0000:04 returning with max=04 [ 2.809468] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0 [ 2.810027] PCI: Scanning bus 0000:03 [ 2.820056] PCI: Fixups for bus 0000:03 [ 2.823893] PCI: Bus scan for 0000:03 returning with max=03 [ 2.829457] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0 [ 2.830012] PCI: Scanning bus 0000:02 [ 2.840056] PCI: Fixups for bus 0000:02 [ 2.843896] PCI: Bus scan for 0000:02 returning with max=02 [ 2.849468] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0 [ 2.850027] PCI: Scanning bus 0000:01 [ 2.860022] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00 [ 2.866977] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x47 [ 2.870009] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 2.876705] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 2.880007] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff] [ 2.890033] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 2.896387] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 2.900021] pci 0000:01:00.0: supports D1 D2 [ 2.904313] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00 [ 2.910009] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x47 [ 2.920008] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff] [ 2.926729] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1dd [ 2.930034] pci 0000:01:00.1: supports D1 D2 [ 2.940070] PCI: Fixups for bus 0000:01 [ 2.943908] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff] [ 2.950004] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 2.956696] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 2.960003] PCI: Bus scan for 0000:01 returning with max=01 [ 2.965569] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1 [ 2.970021] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1 [ 2.980007] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1 [ 2.990005] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1 [ 2.996957] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1 [ 3.000005] PCI: Bus scan for 0000:00 returning with max=05 [ 3.005568] device: '0000:00:00.0': device_add [ 3.010025] bus: 'pci': add device 0000:00:00.0 [ 3.014867] device: '0000:00:01.0': device_add [ 3.020011] bus: 'pci': add device 0000:00:01.0 [ 3.024813] device: '0000:00:01.1': device_add [ 3.030020] bus: 'pci': add device 0000:00:01.1 [ 3.034810] device: '0000:00:02.0': device_add [ 3.040011] bus: 'pci': add device 0000:00:02.0 [ 3.044828] device: '0000:00:02.1': device_add [ 3.050010] bus: 'pci': add device 0000:00:02.1 [ 3.054798] device: '0000:00:04.0': device_add [ 3.060011] bus: 'pci': add device 0000:00:04.0 [ 3.064853] device: '0000:00:06.0': device_add [ 3.069298] bus: 'pci': add device 0000:00:06.0 [ 3.070257] device: '0000:00:09.0': device_add [ 3.074710] bus: 'pci': add device 0000:00:09.0 [ 3.080277] device: '0000:00:0a.0': device_add [ 3.084723] bus: 'pci': add device 0000:00:0a.0 [ 3.090266] device: '0000:00:0b.0': device_add [ 3.094716] bus: 'pci': add device 0000:00:0b.0 [ 3.100286] device: '0000:00:0c.0': device_add [ 3.104736] bus: 'pci': add device 0000:00:0c.0 [ 3.110279] device: '0000:00:0d.0': device_add [ 3.114725] bus: 'pci': add device 0000:00:0d.0 [ 3.120326] device: '0000:00:0e.0': device_add [ 3.124770] bus: 'pci': add device 0000:00:0e.0 [ 3.130269] device: '0000:00:18.0': device_add [ 3.134717] bus: 'pci': add device 0000:00:18.0 [ 3.139532] device: '0000:00:18.1': device_add [ 3.140011] bus: 'pci': add device 0000:00:18.1 [ 3.144818] device: '0000:00:18.2': device_add [ 3.150011] bus: 'pci': add device 0000:00:18.2 [ 3.154801] device: '0000:00:18.3': device_add [ 3.160011] bus: 'pci': add device 0000:00:18.3 [ 3.164820] device: '0000:05:07.0': device_add [ 3.170010] bus: 'pci': add device 0000:05:07.0 [ 3.174803] device: '0000:05': device_add [ 3.180306] device: '0000:04': device_add [ 3.184542] device: '0000:03': device_add [ 3.188810] device: '0000:02': device_add [ 3.190235] device: '0000:01:00.0': device_add [ 3.194692] bus: 'pci': add device 0000:01:00.0 [ 3.200279] device: '0000:01:00.1': device_add [ 3.204725] bus: 'pci': add device 0000:01:00.1 [ 3.210268] device: '0000:01': device_add [ 3.214784] pci 0000:00:00.0: default IRQ router [10de:005e] [ 3.220374] initcall pci_subsys_init+0x0/0x136 returned 0 after 927734 usecs [ 3.227411] calling proto_init+0x0/0x39 @ 1 [ 3.230016] initcall proto_init+0x0/0x39 returned 0 after 0 usecs [ 3.240007] calling net_dev_init+0x0/0x1c2 @ 1 [ 3.244575] device class 'net': registering [ 3.249002] device: 'lo': device_add [ 3.250442] initcall net_dev_init+0x0/0x1c2 returned 0 after 9765 usecs [ 3.257049] calling neigh_init+0x0/0x98 @ 1 [ 3.260006] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs [ 3.270003] calling fib_rules_init+0x0/0xcc @ 1 [ 3.274619] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs [ 3.280007] calling genl_init+0x0/0x100 @ 1 [ 3.300047] initcall genl_init+0x0/0x100 returned 0 after 19531 usecs [ 3.306481] calling cipso_v4_init+0x0/0xae @ 1 [ 3.310024] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs [ 3.316373] calling wanrouter_init+0x0/0x79 @ 1 [ 3.320003] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 3.327322] initcall wanrouter_init+0x0/0x79 returned 0 after 0 usecs [ 3.330004] calling irda_init+0x0/0xcb @ 1 [ 3.334180] irda_init() [ 3.340099] NET: Registered protocol family 23 [ 3.344686] initcall irda_init+0x0/0xcb returned 0 after 9765 usecs [ 3.350004] calling bt_init+0x0/0x81 @ 1 [ 3.354007] Bluetooth: Core ver 2.15 [ 3.360101] device class 'bluetooth': registering [ 3.365007] NET: Registered protocol family 31 [ 3.370003] Bluetooth: HCI device and connection manager initialized [ 3.376364] Bluetooth: HCI socket layer initialized [ 3.380005] initcall bt_init+0x0/0x81 returned 0 after 29296 usecs [ 3.386173] calling wireless_nlevent_init+0x0/0x69 @ 1 [ 3.390004] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs [ 3.400005] calling cfg80211_init+0x0/0x9f @ 1 [ 3.404527] device class 'ieee80211': registering [ 3.460063] Registering platform device 'regulatory.0'. Parent at platform [ 3.466925] device: 'regulatory.0': device_add [ 3.470011] bus: 'platform': add device regulatory.0 [ 3.475183] cfg80211: Using static regulatory domain info [ 3.480004] cfg80211: Regulatory domain: US [ 3.484181] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.490003] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 3.500005] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.506781] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.510003] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.520025] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.526807] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 3.530045] cfg80211: Calling CRDA for country: US [ 3.535050] initcall cfg80211_init+0x0/0x9f returned 0 after 126953 usecs [ 3.540005] calling ieee80211_init+0x0/0x45 @ 1 [ 3.550016] initcall ieee80211_init+0x0/0x45 returned 0 after 0 usecs [ 3.556453] calling netlbl_init+0x0/0xa8 @ 1 [ 3.560002] NetLabel: Initializing [ 3.563402] NetLabel: domain hash size = 128 [ 3.567759] NetLabel: protocols = UNLABELED CIPSOv4 [ 3.570201] NetLabel: unlabeled traffic allowed by default [ 3.575768] initcall netlbl_init+0x0/0xa8 returned 0 after 9765 usecs [ 3.580027] calling rfkill_init+0x0/0xb1 @ 1 [ 3.590002] device class 'rfkill': registering [ 3.594660] device: 'rfkill': device_add [ 3.598834] initcall rfkill_init+0x0/0xb1 returned 0 after 0 usecs [ 3.600005] calling sysctl_init+0x0/0x6f @ 1 [ 3.610006] initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs [ 3.616176] calling pci_iommu_init+0x0/0x4a @ 1 [ 3.679259] DMA-API: preallocated 32768 debug entries [ 3.680026] DMA-API: debugging enabled by kernel config [ 3.685252] initcall pci_iommu_init+0x0/0x4a returned 0 after 58593 usecs [ 3.690005] calling print_all_ICs+0x0/0x5a1 @ 1 [ 3.700002] [ 3.700003] printing PIC contents [ 3.704807] ... PIC IMR: fffa [ 3.707864] ... PIC IRR: 0001 [ 3.710002] ... PIC ISR: 0001 [ 3.713058] ... PIC ELCR: 0828 [ 3.716116] printing local APIC contents on CPU#0/0: [ 3.720000] ... APIC ID: 00000000 (0) [ 3.720000] ... APIC VERSION: 00040010 [ 3.720000] ... APIC TASKPRI: 00000000 (00) [ 3.720000] ... APIC ARBPRI: 000000e0 (e0) [ 3.720000] ... APIC PROCPRI: 00000000 [ 3.720000] ... APIC LDR: 01000000 [ 3.720000] ... APIC DFR: ffffffff [ 3.720000] ... APIC SPIV: 000001ff [ 3.720000] ... APIC ISR field: [ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000 [ 3.720000] ... APIC TMR field: [ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000 [ 3.720000] ... APIC IRR field: [ 3.720000] 0000000000000000000000000000000000000000000000000000000000008000 [ 3.720000] ... APIC ESR: 00000000 [ 3.720000] ... APIC ICR: 000008ef [ 3.720000] ... APIC ICR2: 02000000 [ 3.720000] ... APIC LVTT: 00010000 [ 3.720000] ... APIC LVTPC: 00010000 [ 3.720000] ... APIC LVT0: 00010700 [ 3.720000] ... APIC LVT1: 00000400 [ 3.720000] ... APIC LVTERR: 000000fe [ 3.720000] ... APIC TMICT: 00000000 [ 3.720000] ... APIC TMCCT: 00000000 [ 3.720000] ... APIC TDCR: 00000000 [ 3.720000] [ 3.719992] printing local APIC contents on CPU#1/1: [ 3.719992] ... APIC ID: 01000000 (1) [ 3.720000] ... APIC VERSION: 00040010 [ 3.720000] ... APIC TASKPRI: 00000000 (00) [ 3.720000] ... APIC ARBPRI: 00000030 (30) [ 3.720000] ... APIC PROCPRI: 00000000 [ 3.720000] ... APIC LDR: 02000000 [ 3.720000] ... APIC DFR: ffffffff [ 3.720000] ... APIC SPIV: 000001ff [ 3.720000] ... APIC ISR field: [ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000 [ 3.720000] ... APIC TMR field: [ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000 [ 3.720000] ... APIC IRR field: [ 3.720000] 0000000000010000000000000000000000000000000000000000000000000000 [ 3.720000] ... APIC ESR: 00000000 [ 3.720000] ... APIC ICR: 000008ef [ 3.720000] ... APIC ICR2: 01000000 [ 3.720000] ... APIC LVTT: 00010000 [ 3.720000] ... APIC LVTPC: 00010000 [ 3.720000] ... APIC LVT0: 00010700 [ 3.720000] ... APIC LVT1: 00010400 [ 3.720000] ... APIC LVTERR: 000000fe [ 3.720000] ... APIC TMICT: 00000000 [ 3.720000] ... APIC TMCCT: 00000000 [ 3.720000] ... APIC TDCR: 00000000 [ 3.720000] [ 3.730000] number of MP IRQ sources: 17. [ 3.730003] number of IO-APIC #2 registers: 24. [ 3.734528] testing the IO APIC....................... [ 3.740005] [ 3.741497] IO APIC #2...... [ 3.744374] .... register #00: 00000000 [ 3.750002] ....... : physical APIC id: 00 [ 3.754355] ....... : Delivery Type: 0 [ 3.760024] ....... : LTS : 0 [ 3.764026] .... register #01: 00170011 [ 3.767854] ....... : max redirection entries: 0017 [ 3.770002] ....... : PRQ implemented: 0 [ 3.774268] ....... : IO APIC version: 0011 [ 3.780002] .... register #02: 00000000 [ 3.783836] ....... : arbitration: 00 [ 3.780005] Clocksource tsc unstable (delta = 208562563 ns) [ 3.790002] .... IRQ redirection table: [ 3.793836] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 3.800019] 00 003 0 0 0 0 0 1 1 30 [ 3.810004] 01 003 0 0 0 0 0 1 1 31 [ 3.815239] 02 000 1 0 0 0 0 0 0 00 [ 3.820004] 03 003 1 1 0 1 0 1 1 33 [ 3.825250] 04 003 0 0 0 0 0 1 1 34 [ 3.830004] 05 003 1 1 0 1 0 1 1 35 [ 3.835239] 06 003 0 0 0 0 0 1 1 36 [ 3.840019] 07 003 1 0 0 0 0 1 1 37 [ 3.845265] 08 003 0 0 0 0 0 1 1 38 [ 3.850004] 09 003 0 0 0 0 0 1 1 39 [ 3.855250] 0a 003 0 0 0 0 0 1 1 3A [ 3.863230] 0b 003 1 1 0 1 0 1 1 3B [ 3.868470] 0c 003 0 0 0 0 0 1 1 3C [ 3.873232] 0d 003 0 0 0 0 0 1 1 3D [ 3.878469] 0e 003 0 0 0 0 0 1 1 3E [ 3.883249] 0f 003 0 0 0 0 0 1 1 3F [ 3.888498] 10 000 1 0 0 0 0 0 0 00 [ 3.893230] 11 000 1 0 0 0 0 0 0 00 [ 3.900004] 12 000 1 0 0 0 0 0 0 00 [ 3.905250] 13 000 1 0 0 0 0 0 0 00 [ 3.910004] 14 000 1 0 0 0 0 0 0 00 [ 3.915239] 15 000 1 0 0 0 0 0 0 00 [ 3.920019] 16 000 1 0 0 0 0 0 0 00 [ 3.925267] 17 000 1 0 0 0 0 0 0 00 [ 3.930002] IRQ to pin mappings: [ 3.933228] IRQ0 -> 0:0 [ 3.935704] IRQ1 -> 0:1 [ 3.938183] IRQ3 -> 0:3 [ 3.940735] IRQ4 -> 0:4 [ 3.943211] IRQ5 -> 0:5 [ 3.945689] IRQ6 -> 0:6 [ 3.948166] IRQ7 -> 0:7 [ 3.950735] IRQ8 -> 0:8 [ 3.953211] IRQ9 -> 0:9 [ 3.955687] IRQ10 -> 0:10 [ 3.958338] IRQ11 -> 0:11 [ 3.960837] IRQ12 -> 0:12 [ 3.963488] IRQ13 -> 0:13 [ 3.966139] IRQ14 -> 0:14 [ 3.970198] IRQ15 -> 0:15 [ 3.972853] .................................... done. [ 3.977986] initcall print_all_ICs+0x0/0x5a1 returned 0 after 263671 usecs [ 3.980004] calling hpet_late_init+0x0/0x91 @ 1 [ 3.984619] initcall hpet_late_init+0x0/0x91 returned -19 after 0 usecs [ 3.990004] calling clocksource_done_booting+0x0/0x37 @ 1 [ 4.000019] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs [ 4.007318] calling ftrace_init_debugfs+0x0/0x1ad @ 1 [ 4.010093] initcall ftrace_init_debugfs+0x0/0x1ad returned 0 after 0 usecs [ 4.020006] calling rb_init_debugfs+0x0/0x56 @ 1 [ 4.024709] initcall rb_init_debugfs+0x0/0x56 returned 0 after 0 usecs [ 4.030003] calling tracer_init_debugfs+0x0/0x32e @ 1 [ 4.035550] initcall tracer_init_debugfs+0x0/0x32e returned 0 after 0 usecs [ 4.040020] calling init_trace_printk_function_export+0x0/0x56 @ 1 [ 4.050011] initcall init_trace_printk_function_export+0x0/0x56 returned 0 after 0 usecs [ 4.058089] calling stat_workqueue_init+0x0/0x54 @ 1 [ 4.060013] initcall stat_workqueue_init+0x0/0x54 returned 0 after 0 usecs [ 4.070003] calling event_trace_init+0x0/0x49c @ 1 [ 4.089466] initcall event_trace_init+0x0/0x49c returned 0 after 9765 usecs [ 4.090012] calling ksym_tracer_stat_init+0x0/0x54 @ 1 [ 4.100016] initcall ksym_tracer_stat_init+0x0/0x54 returned 0 after 0 usecs [ 4.107057] calling init_pipe_fs+0x0/0x72 @ 1 [ 4.110092] initcall init_pipe_fs+0x0/0x72 returned 0 after 0 usecs [ 4.116348] calling eventpoll_init+0x0/0x102 @ 1 [ 4.120159] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs [ 4.130004] calling anon_inode_init+0x0/0x15c @ 1 [ 4.134855] initcall anon_inode_init+0x0/0x15c returned 0 after 0 usecs [ 4.140005] calling fscache_init+0x0/0xd1 @ 1 [ 4.144450] Slow work thread pool: Starting up [ 4.150229] Slow work thread pool: Ready [ 4.154219] FS-Cache: Loaded [ 4.157102] initcall fscache_init+0x0/0xd1 returned 0 after 9765 usecs [ 4.160023] calling tomoyo_initerface_init+0x0/0x181 @ 1 [ 4.170131] initcall tomoyo_initerface_init+0x0/0x181 returned 0 after 0 usecs [ 4.177345] calling blk_scsi_ioctl_init+0x0/0x2ad @ 1 [ 4.180005] initcall blk_scsi_ioctl_init+0x0/0x2ad returned 0 after 0 usecs [ 4.186961] calling chr_dev_init+0x0/0xca @ 1 [ 4.190018] device class 'mem': registering [ 4.194441] device: 'mem': device_add [ 4.200283] device: 'kmem': device_add [ 4.204248] device: 'null': device_add [ 4.210252] device: 'port': device_add [ 4.214222] device: 'zero': device_add [ 4.218226] device: 'full': device_add [ 4.220239] device: 'random': device_add [ 4.224421] device: 'urandom': device_add [ 4.230221] device: 'kmsg': device_add [ 4.234229] initcall chr_dev_init+0x0/0xca returned 0 after 39062 usecs [ 4.240005] calling firmware_class_init+0x0/0x9f @ 1 [ 4.245048] device class 'firmware': registering [ 4.250216] initcall firmware_class_init+0x0/0x9f returned 0 after 9765 usecs [ 4.257345] calling ieee1394_init+0x0/0x289 @ 1 [ 4.260412] bus: 'ieee1394': registered [ 4.264248] device class 'ieee1394_host': registering [ 4.270211] device class 'ieee1394_protocol': registering [ 4.275845] device class 'ieee1394_node': registering [ 4.280263] device class 'ieee1394': registering [ 4.285076] bus: 'ieee1394': add driver nodemgr [ 4.290217] initcall ieee1394_init+0x0/0x289 returned 0 after 29296 usecs [ 4.300005] calling cpufreq_gov_performance_init+0x0/0x39 @ 1 [ 4.305838] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs [ 4.310004] calling cpufreq_gov_dbs_init+0x0/0x8e @ 1 [ 4.315349] initcall cpufreq_gov_dbs_init+0x0/0x8e returned 0 after 0 usecs [ 4.320005] calling ssb_modinit+0x0/0x9b @ 1 [ 4.330253] bus: 'ssb': registered [ 4.333666] initcall ssb_modinit+0x0/0x9b returned 0 after 0 usecs [ 4.340006] calling pcibios_assign_resources+0x0/0x9a @ 1 [ 4.345624] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 4.350004] pci 0000:00:09.0: IO window: 0xc000-0xcfff [ 4.355310] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff [ 4.360004] pci 0000:00:09.0: PREFETCH window: disabled [ 4.365397] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 4.370002] pci 0000:00:0b.0: IO window: disabled [ 4.374876] pci 0000:00:0b.0: MEM window: disabled [ 4.380026] pci 0000:00:0b.0: PREFETCH window: disabled [ 4.385421] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 4.390002] pci 0000:00:0c.0: IO window: disabled [ 4.400004] pci 0000:00:0c.0: MEM window: disabled [ 4.404961] pci 0000:00:0c.0: PREFETCH window: disabled [ 4.410004] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 4.415912] pci 0000:00:0d.0: IO window: disabled [ 4.420019] pci 0000:00:0d.0: MEM window: disabled [ 4.424979] pci 0000:00:0d.0: PREFETCH window: disabled [ 4.430010] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200 [ 4.440006] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 4.445922] pci 0000:00:0e.0: IO window: 0xb000-0xbfff [ 4.450005] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff [ 4.456088] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 4.460027] pci 0000:00:09.0: setting latency timer to 64 [ 4.470008] pci 0000:00:0b.0: setting latency timer to 64 [ 4.475407] pci 0000:00:0c.0: setting latency timer to 64 [ 4.480007] pci 0000:00:0d.0: setting latency timer to 64 [ 4.485406] pci 0000:00:0e.0: setting latency timer to 64 [ 4.490005] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 4.495482] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 4.500018] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 4.510003] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff] [ 4.516348] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 4.520003] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 4.530004] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 4.535653] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff] [ 4.540021] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 4.546711] initcall pcibios_assign_resources+0x0/0x9a returned 0 after 195312 usecs [ 4.550004] calling sysctl_core_init+0x0/0x5f @ 1 [ 4.560056] initcall sysctl_core_init+0x0/0x5f returned 0 after 0 usecs [ 4.566659] calling inet_init+0x0/0x231 @ 1 [ 4.570263] NET: Registered protocol family 2 [ 4.575033] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 4.582295] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 4.592850] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 4.603425] TCP: Hash tables configured (established 131072 bind 65536) [ 4.610046] TCP reno registered [ 4.613592] initcall inet_init+0x0/0x231 returned 0 after 39062 usecs [ 4.620026] calling af_unix_init+0x0/0x7b @ 1 [ 4.624506] NET: Registered protocol family 1 [ 4.630033] initcall af_unix_init+0x0/0x7b returned 0 after 9765 usecs [ 4.636550] calling populate_rootfs+0x0/0x131 @ 1 [ 4.640583] initcall populate_rootfs+0x0/0x131 returned 0 after 0 usecs [ 4.650005] calling svm_init+0x0/0x40 @ 1 [ 4.654363] has_svm: svm not available [ 4.658113] kvm: no hardware support [ 4.660022] initcall svm_init+0x0/0x40 returned -95 after 9765 usecs [ 4.666364] initcall svm_init+0x0/0x40 returned with error code -95 [ 4.670004] calling i8259A_init_sysfs+0x0/0x49 @ 1 [ 4.680003] Registering sysdev class 'i8259' [ 4.684550] Registering sys device of class 'i8259' [ 4.690025] Registering sys device 'i82590' [ 4.694441] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 9765 usecs [ 4.700010] calling vsyscall_init+0x0/0x60 @ 1 [ 4.704560] initcall vsyscall_init+0x0/0x60 returned 0 after 0 usecs [ 4.710004] calling sbf_init+0x0/0x118 @ 1 [ 4.714183] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs [ 4.720004] calling i8237A_init_sysfs+0x0/0x49 @ 1 [ 4.724876] Registering sysdev class 'i8237' [ 4.730209] Registering sys device of class 'i8237' [ 4.735087] Registering sys device 'i82370' [ 4.740251] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 19531 usecs [ 4.747291] calling add_rtc_cmos+0x0/0x68 @ 1 [ 4.750008] Registering platform device 'rtc_cmos'. Parent at platform [ 4.756531] device: 'rtc_cmos': device_add [ 4.760023] bus: 'platform': add device rtc_cmos [ 4.764853] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 4.770005] initcall add_rtc_cmos+0x0/0x68 returned 0 after 19531 usecs [ 4.780005] calling cache_sysfs_init+0x0/0x323 @ 1 [ 4.786815] initcall cache_sysfs_init+0x0/0x323 returned 0 after 0 usecs [ 4.790005] calling cpu_debug_init+0x0/0x2de @ 1 [ 4.802659] cpu0(2) debug files 137 [ 4.810500] cpu1(2) debug files 137 [ 4.813997] initcall cpu_debug_init+0x0/0x2de returned 0 after 9765 usecs [ 4.820004] calling mce_init_device+0x0/0x2ed @ 1 [ 4.824794] Registering sysdev class 'machinecheck' [ 4.830276] Registering sys device of class 'machinecheck' [ 4.835763] Registering sys device 'machinecheck0' [ 4.840257] Registering sys device of class 'machinecheck' [ 4.845736] Registering sys device 'machinecheck1' [ 4.850292] device: 'mcelog': device_add [ 4.854442] initcall mce_init_device+0x0/0x2ed returned 0 after 29296 usecs [ 4.860005] calling threshold_init_device+0x0/0xc0 @ 1 [ 4.865221] initcall threshold_init_device+0x0/0xc0 returned 0 after 0 usecs [ 4.870005] calling inject_init+0x0/0x4b @ 1 [ 4.874356] Machine check injector initialized [ 4.880004] initcall inject_init+0x0/0x4b returned 0 after 9765 usecs [ 4.890003] calling msr_init+0x0/0x15c @ 1 [ 4.894192] device class 'msr': registering [ 4.898590] device: 'msr0': device_add [ 4.900369] device: 'msr1': device_add [ 4.904340] initcall msr_init+0x0/0x15c returned 0 after 9765 usecs [ 4.910005] calling ioapic_init_sysfs+0x0/0xd2 @ 1 [ 4.914875] Registering sysdev class 'ioapic' [ 4.920224] Registering sys device of class 'ioapic' [ 4.925192] Registering sys device 'ioapic0' [ 4.930264] initcall ioapic_init_sysfs+0x0/0xd2 returned 0 after 19531 usecs [ 4.937300] calling add_pcspkr+0x0/0x4f @ 1 [ 4.940008] Registering platform device 'pcspkr'. Parent at platform [ 4.950004] device: 'pcspkr': device_add [ 4.953930] bus: 'platform': add device pcspkr [ 4.958586] initcall add_pcspkr+0x0/0x4f returned 0 after 9765 usecs [ 4.960006] calling start_periodic_check_for_corruption+0x0/0x61 @ 1 [ 4.970003] Scanning for low memory corruption every 60 seconds [ 4.975919] initcall start_periodic_check_for_corruption+0x0/0x61 returned 0 after 0 usecs [ 4.980005] calling start_pageattr_test+0x0/0x6c @ 1 [ 4.990099] initcall start_pageattr_test+0x0/0x6c returned 0 after 0 usecs [ 4.996963] calling pt_dump_init+0x0/0x57 @ 1 [ 5.000039] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs [ 5.006296] calling crypto_fpu_module_init+0x0/0x39 @ 1 [ 5.010041] initcall crypto_fpu_module_init+0x0/0x39 returned 0 after 0 usecs [ 5.020004] calling aes_init+0x0/0x39 @ 1 [ 5.024340] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 5.030005] calling init+0x0/0x39 @ 1 [ 5.034148] initcall init+0x0/0x39 returned 0 after 0 usecs [ 5.040004] calling init+0x0/0x39 @ 1 [ 5.043852] initcall init+0x0/0x39 returned 0 after 0 usecs [ 5.050029] calling aesni_init+0x0/0x166 @ 1 [ 5.054379] Intel AES-NI instructions are not detected. [ 5.059603] initcall aesni_init+0x0/0x166 returned -19 after 0 usecs [ 5.060008] calling crc32c_intel_mod_init+0x0/0x47 @ 1 [ 5.070004] initcall crc32c_intel_mod_init+0x0/0x47 returned -19 after 0 usecs [ 5.077214] calling init_vdso_vars+0x0/0x245 @ 1 [ 5.080025] initcall init_vdso_vars+0x0/0x245 returned 0 after 0 usecs [ 5.086546] calling ia32_binfmt_init+0x0/0x3b @ 1 [ 5.090049] initcall ia32_binfmt_init+0x0/0x3b returned 0 after 0 usecs [ 5.100004] calling sysenter_setup+0x0/0x304 @ 1 [ 5.104711] initcall sysenter_setup+0x0/0x304 returned 0 after 0 usecs [ 5.110004] calling init_aout_binfmt+0x0/0x3b @ 1 [ 5.114791] initcall init_aout_binfmt+0x0/0x3b returned 0 after 0 usecs [ 5.120004] calling init_sched_debug_procfs+0x0/0x53 @ 1 [ 5.125409] initcall init_sched_debug_procfs+0x0/0x53 returned 0 after 0 usecs [ 5.130019] calling proc_schedstat_init+0x0/0x49 @ 1 [ 5.140012] initcall proc_schedstat_init+0x0/0x49 returned 0 after 0 usecs [ 5.146877] calling proc_execdomains_init+0x0/0x49 @ 1 [ 5.150012] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs [ 5.160004] calling ioresources_init+0x0/0x63 @ 1 [ 5.164804] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs [ 5.170019] calling uid_cache_init+0x0/0xb4 @ 1 [ 5.174691] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs [ 5.180004] calling init_posix_timers+0x0/0x103 @ 1 [ 5.185004] initcall init_posix_timers+0x0/0x103 returned 0 after 0 usecs [ 5.190003] calling init_posix_cpu_timers+0x0/0xd6 @ 1 [ 5.200004] initcall init_posix_cpu_timers+0x0/0xd6 returned 0 after 0 usecs [ 5.207040] calling nsproxy_cache_init+0x0/0x54 @ 1 [ 5.210059] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs [ 5.216842] calling create_proc_profile+0x0/0x2a0 @ 1 [ 5.220004] initcall create_proc_profile+0x0/0x2a0 returned 0 after 0 usecs [ 5.230003] calling timekeeping_init_device+0x0/0x49 @ 1 [ 5.235395] Registering sysdev class 'timekeeping' [ 5.240237] Registering sys device of class 'timekeeping' [ 5.245633] Registering sys device 'timekeeping0' [ 5.250281] initcall timekeeping_init_device+0x0/0x49 returned 0 after 19531 usecs [ 5.257836] calling init_clocksource_sysfs+0x0/0x77 @ 1 [ 5.260003] Registering sysdev class 'clocksource' [ 5.270153] Registering sys device of class 'clocksource' [ 5.275549] Registering sys device 'clocksource0' [ 5.280229] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 19531 usecs [ 5.287699] calling init_timer_list_procfs+0x0/0x53 @ 1 [ 5.290041] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs [ 5.300003] calling lockdep_proc_init+0x0/0x69 @ 1 [ 5.304900] initcall lockdep_proc_init+0x0/0x69 returned 0 after 0 usecs [ 5.310003] calling futex_init+0x0/0xac @ 1 [ 5.314289] initcall futex_init+0x0/0xac returned 0 after 0 usecs [ 5.320006] calling proc_dma_init+0x0/0x49 @ 1 [ 5.324545] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs [ 5.330019] calling kallsyms_init+0x0/0x4c @ 1 [ 5.334554] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs [ 5.340003] calling crash_save_vmcoreinfo_init+0x0/0x492 @ 1 [ 5.350032] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 0 usecs [ 5.357593] calling crash_notes_memory_init+0x0/0x5f @ 1 [ 5.360009] initcall crash_notes_memory_init+0x0/0x5f returned 0 after 0 usecs [ 5.370020] calling backtrace_regression_test+0x0/0x11f @ 1 [ 5.375671] ====[ backtrace testing ]=========== [ 5.380002] Testing a backtrace from process context. [ 5.385046] The following trace is a kernel self test and not a bug! [ 5.390004] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 5.396866] Call Trace: [ 5.400006] [<ffffffff810b3619>] ? backtrace_regression_test+0x0/0x11f [ 5.406608] [<ffffffff810b3663>] backtrace_regression_test+0x4a/0x11f [ 5.410020] [<ffffffff810a3721>] ? jiffies_read+0xd/0x3c [ 5.415414] [<ffffffff810a1f2a>] ? ktime_get+0x77/0xea [ 5.420004] [<ffffffff810b3619>] ? backtrace_regression_test+0x0/0x11f [ 5.430006] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 5.435658] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 5.440006] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 5.446091] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 5.450020] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.460004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.465742] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 5.470006] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 5.475484] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.480004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 5.485395] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 5.490019] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 5.500004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 5.505916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 5.510005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 5.515397] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 5.520005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 5.525395] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 5.530017] Testing a backtrace from irq context. [ 5.534717] The following trace is a kernel self test and not a bug! [ 5.540011] Pid: 4, comm: ksoftirqd/0 Tainted: G W 2.6.31-rc5-tip #291 [ 5.550001] Call Trace: [ 5.552449] <IRQ> [<ffffffff810b35f7>] backtrace_test_irq_callback+0x21/0x43 [ 5.560004] [<ffffffff810818dd>] tasklet_action+0x91/0xff [ 5.565484] [<ffffffff8102f44c>] ? call_softirq+0x1c/0x28 [ 5.570004] [<ffffffff8108312a>] __do_softirq+0x12c/0x24b [ 5.575482] [<ffffffff810827ac>] ? ksoftirqd+0x0/0x1c9 [ 5.580003] [<ffffffff8102f44c>] call_softirq+0x1c/0x28 [ 5.585307] <EOI> [<ffffffff8103177a>] do_softirq+0x56/0xb3 [ 5.590003] [<ffffffff81082857>] ksoftirqd+0xab/0x1c9 [ 5.595135] [<ffffffff81096e4e>] kthread+0x9c/0xa4 [ 5.600003] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 5.604962] [<ffffffff81096db2>] ? kthread+0x0/0xa4 [ 5.610003] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 5.615282] Testing a saved backtrace. [ 5.620019] The following trace is a kernel self test and not a bug! [ 5.626367] [<ffffffff8103bcb7>] save_stack_trace+0x3e/0x73 [ 5.634268] [<ffffffff810b3701>] backtrace_regression_test+0xe8/0x11f [ 5.640002] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 5.645679] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 5.650002] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 5.654980] [<ffffffffffffffff>] 0xffffffffffffffff [ 5.660017] ====[ end of backtrace testing ]==== [ 5.664634] initcall backtrace_regression_test+0x0/0x11f returned 0 after 283203 usecs [ 5.670003] calling hung_task_init+0x0/0x79 @ 1 [ 5.674698] initcall hung_task_init+0x0/0x79 returned 0 after 0 usecs [ 5.680021] calling rcu_torture_init+0x0/0x6ef @ 1 [ 5.690024] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 [ 5.701021] initcall rcu_torture_init+0x0/0x6ef returned 0 after 9765 usecs [ 5.710007] calling utsname_sysctl_init+0x0/0x3b @ 1 [ 5.715072] sysctl table check failed: /kernel/ostype .1.1 No proc_handler [ 5.723317] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 5.730002] Call Trace: [ 5.732452] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 5.737416] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 5.740004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 5.750028] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 5.756547] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 5.760004] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b [ 5.766002] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 5.770004] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 5.780004] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b [ 5.785916] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 5.790020] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 5.795586] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 5.800005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 5.810004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.815742] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.820005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 5.826004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 5.830019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.835759] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 5.840004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 5.850004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 5.855917] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 5.860005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 5.865311] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 5.870021] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 5.874981] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 5.880004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 5.885141] sysctl table check failed: /kernel/osrelease .1.2 No proc_handler [ 5.893577] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 5.900002] Call Trace: [ 5.902450] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 5.910019] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 5.916019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 5.920005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 5.926522] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 5.930004] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b [ 5.940005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 5.946089] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 5.950019] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b [ 5.955933] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 5.960005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 5.970004] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 5.976089] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 5.980004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.985741] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 5.990019] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 6.000004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 6.005482] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.010004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 6.015395] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 6.020004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 6.025916] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 6.030020] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 6.040005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 6.045395] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 6.050008] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 6.055405] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 6.060009] sysctl table check failed: /kernel/version .1.4 No proc_handler [ 6.067066] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 6.070017] Call Trace: [ 6.072469] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 6.080004] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 6.086002] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 6.090005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 6.100005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 6.106434] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b [ 6.110020] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 6.116107] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 6.120004] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b [ 6.130006] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 6.135657] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 6.140005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 6.146089] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 6.150019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.160004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.165743] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 6.170004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 6.175481] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.180004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 6.185396] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 6.190019] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 6.200004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 6.205916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 6.210005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 6.215397] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 6.220005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 6.225395] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 6.230024] sysctl table check failed: /kernel/hostname .1.7 No proc_handler [ 6.237169] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 6.240002] Call Trace: [ 6.242452] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 6.250004] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 6.260004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 6.266003] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 6.270019] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 6.276453] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b [ 6.280005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 6.290005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 6.296089] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b [ 6.300004] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 6.305656] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 6.310019] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 6.320005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 6.325830] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.330004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.335743] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 6.340004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 6.345481] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.350019] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 6.360004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 6.365740] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 6.370004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 6.375918] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 6.380005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 6.385396] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 6.390021] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 6.395412] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 6.400009] sysctl table check failed: /kernel/domainname .1.8 No proc_handler [ 6.410003] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 6.416865] Call Trace: [ 6.420004] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 6.424962] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 6.430019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 6.436019] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 6.440005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 6.450004] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b [ 6.456002] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 6.460005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 6.466089] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b [ 6.470019] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 6.480005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 6.485569] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 6.490005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 6.495830] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.500004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.505742] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 6.510019] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 6.520004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 6.525743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 6.530004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 6.535742] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 6.540004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 6.545916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 6.550020] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 6.560004] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 6.564962] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 6.570004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 6.575138] initcall utsname_sysctl_init+0x0/0x3b returned 0 after 839843 usecs [ 6.580003] calling init_lstats_procfs+0x0/0x4c @ 1 [ 6.584973] initcall init_lstats_procfs+0x0/0x4c returned 0 after 0 usecs [ 6.590018] calling ftrace_nodyn_init+0x0/0x37 @ 1 [ 6.600004] initcall ftrace_nodyn_init+0x0/0x37 returned 0 after 0 usecs [ 6.606694] calling init_events+0x0/0x8c @ 1 [ 6.610010] initcall init_events+0x0/0x8c returned 0 after 0 usecs [ 6.616183] calling init_sched_switch_trace+0x0/0x39 @ 1 [ 6.620007] initcall init_sched_switch_trace+0x0/0x39 returned 0 after 0 usecs [ 6.627222] calling init_stack_trace+0x0/0x39 @ 1 [ 6.630021] initcall init_stack_trace+0x0/0x39 returned 0 after 0 usecs [ 6.640003] calling init_function_trace+0x0/0x39 @ 1 [ 6.645050] initcall init_function_trace+0x0/0x39 returned 0 after 0 usecs [ 6.650005] calling init_wakeup_tracer+0x0/0x49 @ 1 [ 6.654963] initcall init_wakeup_tracer+0x0/0x49 returned 0 after 0 usecs [ 6.660003] calling stack_trace_init+0x0/0x91 @ 1 [ 6.664810] initcall stack_trace_init+0x0/0x91 returned 0 after 0 usecs [ 6.670025] calling init_mmio_trace+0x0/0x39 @ 1 [ 6.680006] initcall init_mmio_trace+0x0/0x39 returned 0 after 0 usecs [ 6.686521] calling init_power_trace+0x0/0x39 @ 1 [ 6.690005] initcall init_power_trace+0x0/0x39 returned 0 after 0 usecs [ 6.696607] calling init_kmem_tracer+0x0/0x7d @ 1 [ 6.700004] Warning: could not register the kmem tracer [ 6.705222] initcall init_kmem_tracer+0x0/0x7d returned 1 after 0 usecs [ 6.710004] initcall init_kmem_tracer+0x0/0x7d returned with error code 1 [ 6.720004] calling init_blk_tracer+0x0/0x7e @ 1 [ 6.724702] initcall init_blk_tracer+0x0/0x7e returned 0 after 0 usecs [ 6.730025] calling register_ftrace_syscalls+0x0/0xc5 @ 1 [ 6.735512] initcall register_ftrace_syscalls+0x0/0xc5 returned 0 after 0 usecs [ 6.740004] calling init_ksym_trace+0x0/0x76 @ 1 [ 6.750012] initcall init_ksym_trace+0x0/0x76 returned 0 after 0 usecs [ 6.756532] calling init_per_zone_wmark_min+0x0/0x8d @ 1 [ 6.760070] initcall init_per_zone_wmark_min+0x0/0x8d returned 0 after 0 usecs [ 6.770003] calling pdflush_init+0x0/0x43 @ 1 [ 6.774705] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs [ 6.780026] calling kswapd_init+0x0/0x97 @ 1 [ 6.784508] initcall kswapd_init+0x0/0x97 returned 0 after 0 usecs [ 6.790004] calling init_tmpfs+0x0/0x64 @ 1 [ 6.794339] initcall init_tmpfs+0x0/0x64 returned 0 after 0 usecs [ 6.800005] calling setup_vmstat+0x0/0xf0 @ 1 [ 6.804482] initcall setup_vmstat+0x0/0xf0 returned 0 after 0 usecs [ 6.810004] calling mm_sysfs_init+0x0/0x50 @ 1 [ 6.814540] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs [ 6.820027] calling proc_vmalloc_init+0x0/0x4c @ 1 [ 6.824909] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs [ 6.830004] calling procswaps_init+0x0/0x49 @ 1 [ 6.840012] initcall procswaps_init+0x0/0x49 returned 0 after 0 usecs [ 6.846443] calling hugetlb_init+0x0/0x3cc @ 1 [ 6.850008] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.856381] initcall hugetlb_init+0x0/0x3cc returned 0 after 0 usecs [ 6.860019] calling slab_proc_init+0x0/0x4c @ 1 [ 6.864643] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs [ 6.870004] calling slab_sysfs_init+0x0/0x119 @ 1 [ 6.954616] initcall slab_sysfs_init+0x0/0x119 returned 0 after 68359 usecs [ 6.960110] calling fasync_init+0x0/0x51 @ 1 [ 6.975420] initcall fasync_init+0x0/0x51 returned 0 after 9765 usecs [ 6.980132] calling proc_filesystems_init+0x0/0x49 @ 1 [ 6.985369] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs [ 6.990005] calling dnotify_init+0x0/0xa7 @ 1 [ 7.005625] initcall dnotify_init+0x0/0xa7 returned 0 after 9765 usecs [ 7.010026] calling inotify_setup+0x0/0x37 @ 1 [ 7.014554] initcall inotify_setup+0x0/0x37 returned 0 after 0 usecs [ 7.020004] calling aio_setup+0x0/0x9c @ 1 [ 7.050095] initcall aio_setup+0x0/0x9c returned 0 after 29296 usecs [ 7.056443] calling proc_locks_init+0x0/0x49 @ 1 [ 7.060037] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs [ 7.066555] calling init_sys32_ioctl+0x0/0xac @ 1 [ 7.070019] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs [ 7.076625] calling init_mbcache+0x0/0x3b @ 1 [ 7.080005] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs [ 7.086262] calling dquot_init+0x0/0x12a @ 1 [ 7.090002] VFS: Disk quotas dquot_6.5.2 [ 7.104868] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 7.110065] initcall dquot_init+0x0/0x12a returned 0 after 19531 usecs [ 7.116581] calling init_v1_quota_format+0x0/0x39 @ 1 [ 7.120005] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs [ 7.126954] calling proc_cmdline_init+0x0/0x49 @ 1 [ 7.130014] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs [ 7.140004] calling proc_cpuinfo_init+0x0/0x49 @ 1 [ 7.144883] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs [ 7.150019] calling proc_devices_init+0x0/0x49 @ 1 [ 7.154902] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs [ 7.160004] calling proc_interrupts_init+0x0/0x49 @ 1 [ 7.165143] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs [ 7.170009] calling proc_loadavg_init+0x0/0x49 @ 1 [ 7.180012] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs [ 7.186702] calling proc_meminfo_init+0x0/0x49 @ 1 [ 7.190027] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs [ 7.200004] calling proc_stat_init+0x0/0x49 @ 1 [ 7.204623] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs [ 7.210004] calling proc_uptime_init+0x0/0x49 @ 1 [ 7.214798] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs [ 7.220004] calling proc_version_init+0x0/0x49 @ 1 [ 7.224884] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs [ 7.230019] calling proc_softirqs_init+0x0/0x49 @ 1 [ 7.234988] initcall proc_softirqs_init+0x0/0x49 returned 0 after 0 usecs [ 7.240004] calling proc_kcore_init+0x0/0x70 @ 1 [ 7.250021] initcall proc_kcore_init+0x0/0x70 returned 0 after 0 usecs [ 7.256537] calling proc_kmsg_init+0x0/0x4c @ 1 [ 7.260012] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs [ 7.266443] calling proc_page_init+0x0/0x69 @ 1 [ 7.270034] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs [ 7.276470] calling configfs_init+0x0/0xfb @ 1 [ 7.291246] initcall configfs_init+0x0/0xfb returned 0 after 9765 usecs [ 7.297849] calling init_devpts_fs+0x0/0x72 @ 1 [ 7.300135] initcall init_devpts_fs+0x0/0x72 returned 0 after 0 usecs [ 7.306564] calling init_dlm+0x0/0xae @ 1 [ 7.321364] device: 'dlm-control': device_add [ 7.325982] device: 'dlm-monitor': device_add [ 7.342388] device: 'dlm_plock': device_add [ 7.346791] DLM (built Aug 2 2009 22:49:30) installed [ 7.350027] initcall init_dlm+0x0/0xae returned 0 after 39062 usecs [ 7.356286] calling init_reiserfs_fs+0x0/0xb2 @ 1 [ 7.371489] initcall init_reiserfs_fs+0x0/0xb2 returned 0 after 9765 usecs [ 7.378352] calling init_ext3_fs+0x0/0x99 @ 1 [ 7.391644] initcall init_ext3_fs+0x0/0x99 returned 0 after 9765 usecs [ 7.398165] calling init_ext2_fs+0x0/0x99 @ 1 [ 7.411883] initcall init_ext2_fs+0x0/0x99 returned 0 after 9765 usecs [ 7.418400] calling init_ext4_fs+0x0/0x111 @ 1 [ 7.433538] initcall init_ext4_fs+0x0/0x111 returned 0 after 9765 usecs [ 7.440031] calling journal_init+0x0/0xf5 @ 1 [ 7.456339] initcall journal_init+0x0/0xf5 returned 0 after 9765 usecs [ 7.460030] calling journal_init+0x0/0xd6 @ 1 [ 7.476480] initcall journal_init+0x0/0xd6 returned 0 after 9765 usecs [ 7.480028] calling init_cramfs_fs+0x0/0x57 @ 1 [ 7.484673] initcall init_cramfs_fs+0x0/0x57 returned 0 after 0 usecs [ 7.490005] calling init_ramfs_fs+0x0/0x39 @ 1 [ 7.494532] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs [ 7.500004] calling init_hugetlbfs_fs+0x0/0xbe @ 1 [ 7.521169] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 19531 usecs [ 7.528214] calling init_fat_fs+0x0/0x75 @ 1 [ 7.541176] initcall init_fat_fs+0x0/0x75 returned 0 after 9765 usecs [ 7.547609] calling init_msdos_fs+0x0/0x39 @ 1 [ 7.550029] initcall init_msdos_fs+0x0/0x39 returned 0 after 0 usecs [ 7.556372] calling init_bfs_fs+0x0/0x89 @ 1 [ 7.571734] initcall init_bfs_fs+0x0/0x89 returned 0 after 9765 usecs [ 7.578168] calling init_iso9660_fs+0x0/0x89 @ 1 [ 7.590952] initcall init_iso9660_fs+0x0/0x89 returned 0 after 9765 usecs [ 7.597727] calling init_hfs_fs+0x0/0x83 @ 1 [ 7.610719] initcall init_hfs_fs+0x0/0x83 returned 0 after 9765 usecs [ 7.617150] calling ecryptfs_init+0x0/0x220 @ 1 [ 7.636642] device: 'ecryptfs': device_add [ 7.640288] initcall ecryptfs_init+0x0/0x220 returned 0 after 19531 usecs [ 7.647067] calling init_nls_cp437+0x0/0x39 @ 1 [ 7.650838] initcall init_nls_cp437+0x0/0x39 returned 0 after 0 usecs [ 7.657273] calling init_nls_cp737+0x0/0x39 @ 1 [ 7.660005] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs [ 7.670003] calling init_nls_cp775+0x0/0x39 @ 1 [ 7.674616] initcall init_nls_cp775+0x0/0x39 returned 0 after 0 usecs [ 7.680003] calling init_nls_cp850+0x0/0x39 @ 1 [ 7.684615] initcall init_nls_cp850+0x0/0x39 returned 0 after 0 usecs [ 7.690028] calling init_nls_cp852+0x0/0x39 @ 1 [ 7.694643] initcall init_nls_cp852+0x0/0x39 returned 0 after 0 usecs [ 7.700003] calling init_nls_cp857+0x0/0x39 @ 1 [ 7.704616] initcall init_nls_cp857+0x0/0x39 returned 0 after 0 usecs [ 7.710003] calling init_nls_cp861+0x0/0x39 @ 1 [ 7.714616] initcall init_nls_cp861+0x0/0x39 returned 0 after 0 usecs [ 7.720003] calling init_nls_cp862+0x0/0x39 @ 1 [ 7.730019] initcall init_nls_cp862+0x0/0x39 returned 0 after 0 usecs [ 7.736451] calling init_nls_cp863+0x0/0x39 @ 1 [ 7.740004] initcall init_nls_cp863+0x0/0x39 returned 0 after 0 usecs [ 7.746432] calling init_nls_cp874+0x0/0x39 @ 1 [ 7.750004] initcall init_nls_cp874+0x0/0x39 returned 0 after 0 usecs [ 7.756435] calling init_nls_cp932+0x0/0x39 @ 1 [ 7.760004] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs [ 7.770018] calling init_nls_euc_jp+0x0/0x6f @ 1 [ 7.774721] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs [ 7.780003] calling init_nls_cp936+0x0/0x39 @ 1 [ 7.784616] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs [ 7.790003] calling init_nls_cp949+0x0/0x39 @ 1 [ 7.794616] initcall init_nls_cp949+0x0/0x39 returned 0 after 0 usecs [ 7.800003] calling init_nls_cp950+0x0/0x39 @ 1 [ 7.804616] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs [ 7.810018] calling init_nls_cp1250+0x0/0x39 @ 1 [ 7.814720] initcall init_nls_cp1250+0x0/0x39 returned 0 after 0 usecs [ 7.820003] calling init_nls_cp1251+0x0/0x39 @ 1 [ 7.830004] initcall init_nls_cp1251+0x0/0x39 returned 0 after 0 usecs [ 7.836519] calling init_nls_ascii+0x0/0x39 @ 1 [ 7.840004] initcall init_nls_ascii+0x0/0x39 returned 0 after 0 usecs [ 7.846435] calling init_nls_iso8859_1+0x0/0x39 @ 1 [ 7.850019] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs [ 7.860003] calling init_nls_iso8859_4+0x0/0x39 @ 1 [ 7.864962] initcall init_nls_iso8859_4+0x0/0x39 returned 0 after 0 usecs [ 7.870003] calling init_nls_iso8859_5+0x0/0x39 @ 1 [ 7.874960] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs [ 7.880003] calling init_nls_iso8859_6+0x0/0x39 @ 1 [ 7.884963] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs [ 7.890018] calling init_nls_iso8859_7+0x0/0x39 @ 1 [ 7.900004] initcall init_nls_iso8859_7+0x0/0x39 returned 0 after 0 usecs [ 7.906781] calling init_nls_cp1255+0x0/0x39 @ 1 [ 7.910004] initcall init_nls_cp1255+0x0/0x39 returned 0 after 0 usecs [ 7.916522] calling init_nls_iso8859_9+0x0/0x39 @ 1 [ 7.920004] initcall init_nls_iso8859_9+0x0/0x39 returned 0 after 0 usecs [ 7.930018] calling init_nls_iso8859_14+0x0/0x39 @ 1 [ 7.935067] initcall init_nls_iso8859_14+0x0/0x39 returned 0 after 0 usecs [ 7.940003] calling init_nls_koi8_r+0x0/0x39 @ 1 [ 7.944703] initcall init_nls_koi8_r+0x0/0x39 returned 0 after 0 usecs [ 7.950005] calling init_sysv_fs+0x0/0x75 @ 1 [ 7.965022] initcall init_sysv_fs+0x0/0x75 returned 0 after 9765 usecs [ 7.970091] calling init_ntfs_fs+0x0/0x253 @ 1 [ 7.974615] NTFS driver 2.1.29 [Flags: R/W DEBUG]. [ 7.992350] initcall init_ntfs_fs+0x0/0x253 returned 0 after 19531 usecs [ 7.999047] calling init_ufs_fs+0x0/0x89 @ 1 [ 8.011586] initcall init_ufs_fs+0x0/0x89 returned 0 after 9765 usecs [ 8.018020] calling init_efs_fs+0x0/0x95 @ 1 [ 8.020021] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 8.035735] initcall init_efs_fs+0x0/0x95 returned 0 after 9765 usecs [ 8.040030] calling init_romfs_fs+0x0/0xab @ 1 [ 8.044555] ROMFS MTD (C) 2007 Red Hat, Inc. [ 8.061332] initcall init_romfs_fs+0x0/0xab returned 0 after 19531 usecs [ 8.068025] calling init_qnx4_fs+0x0/0x99 @ 1 [ 8.080617] QNX4 filesystem 0.2.3 registered. [ 8.084973] initcall init_qnx4_fs+0x0/0x99 returned 0 after 9765 usecs [ 8.090004] calling init_autofs_fs+0x0/0x39 @ 1 [ 8.094615] initcall init_autofs_fs+0x0/0x39 returned 0 after 0 usecs [ 8.100003] calling init_autofs4_fs+0x0/0x4c @ 1 [ 8.104702] initcall init_autofs4_fs+0x0/0x4c returned -16 after 0 usecs [ 8.110004] initcall init_autofs4_fs+0x0/0x4c returned with error code -16 [ 8.120025] calling fuse_init+0x0/0x15c @ 1 [ 8.124295] fuse init (API version 7.12) [ 8.139711] device: 'fuse': device_add [ 8.151362] initcall fuse_init+0x0/0x15c returned 0 after 29296 usecs [ 8.157795] calling init_udf_fs+0x0/0x89 @ 1 [ 8.171133] initcall init_udf_fs+0x0/0x89 returned 0 after 9765 usecs [ 8.177562] calling init_omfs_fs+0x0/0x39 @ 1 [ 8.180008] initcall init_omfs_fs+0x0/0x39 returned 0 after 0 usecs [ 8.186268] calling init_jfs_fs+0x0/0x1f8 @ 1 [ 8.202499] JFS: nTxBlock = 7700, nTxLock = 61601 [ 8.214301] initcall init_jfs_fs+0x0/0x1f8 returned 0 after 19531 usecs [ 8.220098] calling init_nilfs_fs+0x0/0xb9 @ 1 [ 8.226415] initcall init_nilfs_fs+0x0/0xb9 returned 0 after 0 usecs [ 8.230029] calling ocfs2_init+0x0/0x4c5 @ 1 [ 8.234386] OCFS2 1.5.0 [ 8.260226] initcall ocfs2_init+0x0/0x4c5 returned 0 after 29296 usecs [ 8.266748] calling ocfs2_stack_glue_init+0x0/0xbb @ 1 [ 8.270290] initcall ocfs2_stack_glue_init+0x0/0xbb returned 0 after 0 usecs [ 8.277325] calling o2cb_stack_init+0x0/0x39 @ 1 [ 8.280003] ocfs2: Registered cluster interface o2cb [ 8.284962] initcall o2cb_stack_init+0x0/0x39 returned 0 after 0 usecs [ 8.290003] calling init_o2nm+0x0/0xcf @ 1 [ 8.294182] OCFS2 Node Manager 1.5.0 [ 8.312148] initcall init_o2nm+0x0/0xcf returned 0 after 19531 usecs [ 8.318494] calling dlm_init+0x0/0x38a @ 1 [ 8.320042] OCFS2 DLM 1.5.0 [ 8.334832] initcall dlm_init+0x0/0x38a returned 0 after 9765 usecs [ 8.340030] calling init_dlmfs_fs+0x0/0x106 @ 1 [ 8.344646] OCFS2 DLMFS 1.5.0 [ 8.358507] OCFS2 User DLM kernel interface loaded [ 8.360023] initcall init_dlmfs_fs+0x0/0x106 returned 0 after 19531 usecs [ 8.370004] calling init_gfs2_fs+0x0/0x20d @ 1 [ 8.382435] GFS2 (built Aug 2 2009 22:49:39) installed [ 8.387660] initcall init_gfs2_fs+0x0/0x20d returned 0 after 9765 usecs [ 8.390030] calling ipc_init+0x0/0x56 @ 1 [ 8.394148] msgmni has been set to 1925 [ 8.400023] initcall ipc_init+0x0/0x56 returned 0 after 9765 usecs [ 8.406200] calling ipc_sysctl_init+0x0/0x3b @ 1 [ 8.410027] sysctl table check failed: /kernel/shmmax .1.34 No proc_handler [ 8.420005] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 8.426868] Call Trace: [ 8.429324] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 8.430021] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 8.440005] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 8.446005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 8.450005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 8.456437] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 8.460005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 8.470025] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 8.476115] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 8.480006] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 8.485665] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 8.490007] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 8.500006] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 8.505830] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.510019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.515759] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 8.520006] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 8.525490] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.530004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 8.540004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 8.545742] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 8.550020] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 8.555934] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 8.560006] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 8.565404] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 8.570005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 8.575394] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 8.580011] sysctl table check failed: /kernel/shmall .1.41 No proc_handler [ 8.590018] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 8.596883] Call Trace: [ 8.600005] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 8.604963] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 8.610004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 8.616001] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 8.620005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 8.630020] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 8.635671] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 8.640005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 8.646088] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 8.650005] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 8.655655] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 8.660005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 8.670020] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 8.675848] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.680004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.685743] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 8.690004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 8.700004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.705743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 8.710019] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 8.715760] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 8.720005] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 8.725917] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 8.730007] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 8.735405] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 8.740005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 8.745396] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 8.750026] sysctl table check failed: /kernel/shmmni .1.45 No proc_handler [ 8.762156] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 8.769021] Call Trace: [ 8.770004] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 8.774962] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 8.780004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 8.786004] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 8.790020] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 8.800004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 8.805656] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 8.810005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 8.816088] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 8.820004] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 8.830020] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 8.835588] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 8.840005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 8.845829] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.850004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.855742] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 8.860004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 8.870019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 8.875758] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 8.880004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 8.885741] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 8.890004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 8.895916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 8.900005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 8.910019] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 8.914982] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 8.920004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 8.925143] sysctl table check failed: /kernel/msgmax .1.35 No proc_handler [ 8.932778] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 8.939645] Call Trace: [ 8.940004] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 8.944963] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 8.950019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 8.956020] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 8.960005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 8.970004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 8.975658] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 8.980005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 8.990022] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 8.995586] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 9.000005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 9.005569] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 9.010005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 9.015829] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.020004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.030019] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 9.036019] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 9.040011] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.045751] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 9.050005] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 9.055743] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 9.060004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 9.070020] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 9.075327] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 9.080004] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 9.084965] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 9.090004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 9.095141] sysctl table check failed: /kernel/msgmni .1.42 No proc_handler [ 9.103402] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 9.110017] Call Trace: [ 9.112468] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 9.117432] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 9.120004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 9.130005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 9.136521] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 9.140004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 9.145656] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 9.150020] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 9.160004] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 9.165569] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 9.170005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 9.175569] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 9.180005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 9.185831] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.190019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.200005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 9.206002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 9.210004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.215743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 9.220004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 9.225743] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 9.230019] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 9.240005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 9.245311] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 9.250006] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 9.254972] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 9.260004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 9.265142] sysctl table check failed: /kernel/msgmnb .1.36 No proc_handler [ 9.273419] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 9.280002] Call Trace: [ 9.282451] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 9.287413] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 9.290004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 9.300005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 9.306522] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 9.310019] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 9.315674] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 9.320005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 9.330004] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 9.335571] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 9.340005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 9.345570] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 9.350020] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 9.360004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.365743] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.370005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 9.376002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 9.380004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.385743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 9.390019] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 9.400004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 9.405917] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 9.410005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 9.415308] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 9.420004] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 9.424962] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 9.430019] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 9.435161] sysctl table check failed: /kernel/sem .1.43 No proc_handler [ 9.443144] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 9.450002] Call Trace: [ 9.452453] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 9.457413] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 9.460004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 9.470020] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 9.476539] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 9.480004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 9.490005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 9.496090] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 9.500004] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 9.505569] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 9.510022] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 9.515587] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 9.520005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 9.530004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.535742] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.540005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 9.546002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 9.550019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.560005] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 9.565394] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 9.570004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 9.575915] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 9.580005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 9.585310] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 9.590019] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 9.594982] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 9.600004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 9.605142] sysctl table check failed: /kernel/auto_msgmni No proc_handler [ 9.613367] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 9.620002] Call Trace: [ 9.622453] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 9.630019] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 9.636019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 9.640005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 9.646521] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 9.650004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b [ 9.660005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 9.666090] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 9.670019] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b [ 9.675587] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 9.680005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 9.690005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 9.696090] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 9.700004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.705743] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.710019] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 9.716020] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 9.720004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.730004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 9.735396] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 9.740004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 9.745915] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 9.750020] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 9.755327] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 9.760004] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 9.764963] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 9.770006] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 9.780007] initcall ipc_sysctl_init+0x0/0x3b returned 0 after 1337890 usecs [ 9.787048] calling init_mqueue_fs+0x0/0xee @ 1 [ 9.800719] sysctl table check failed: /fs/mqueue/queues_max No proc_handler [ 9.807935] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 9.810025] Call Trace: [ 9.812478] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 9.820005] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 9.826002] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 9.830004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 9.840005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 9.846531] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 9.850020] [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34 [ 9.855673] [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6 [ 9.860005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 9.870005] [<ffffffff813ffe15>] ? init_once+0x0/0x3b [ 9.875135] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 9.880004] [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40 [ 9.886349] [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee [ 9.890019] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee [ 9.895586] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee [ 9.900005] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 9.910005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 9.915570] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 9.920005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 9.925829] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.930019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.935760] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 9.940005] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 9.950004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 9.955742] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 9.960004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 9.965743] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 9.970019] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 9.980005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 9.985319] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 9.990004] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 9.994963] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 10.000004] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 10.005142] sysctl table check failed: /fs/mqueue/msg_max No proc_handler [ 10.013031] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 10.020002] Call Trace: [ 10.022451] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 10.027412] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 10.030007] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 10.036010] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 10.040005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 10.050020] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 10.056451] [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34 [ 10.060005] [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6 [ 10.070005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 10.076089] [<ffffffff813ffe15>] ? init_once+0x0/0x3b [ 10.080005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 10.086089] [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40 [ 10.090019] [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee [ 10.095501] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee [ 10.100004] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee [ 10.110004] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 10.115657] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 10.120005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 10.126089] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 10.130019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 10.135758] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 10.140005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 10.150004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 10.155484] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 10.160004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 10.165395] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 10.170019] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 10.175933] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 10.180005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 10.190005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 10.195396] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 10.200005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 10.205404] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 10.210024] sysctl table check failed: /fs/mqueue/msgsize_max No proc_handler [ 10.217327] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291 [ 10.220002] Call Trace: [ 10.222451] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c [ 10.230004] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7 [ 10.236003] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 10.240004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7 [ 10.250020] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd [ 10.256540] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd [ 10.260005] [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34 [ 10.265657] [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6 [ 10.270005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57 [ 10.280004] [<ffffffff813ffe15>] ? init_once+0x0/0x3b [ 10.285137] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41 [ 10.290022] [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40 [ 10.296367] [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee [ 10.300004] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee [ 10.310004] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee [ 10.315571] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8 [ 10.320005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f [ 10.325570] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea [ 10.330020] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472 [ 10.335844] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 10.340004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 10.350005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a [ 10.356002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87 [ 10.360004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb [ 10.365742] [<ffffffff81458229>] ? ida_get_new+0x21/0x37 [ 10.370019] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb [ 10.375759] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe [ 10.380004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2 [ 10.390005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50 [ 10.395311] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5 [ 10.400004] [<ffffffff8102f34a>] child_rip+0xa/0x20 [ 10.404964] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5 [ 10.410019] [<ffffffff8102f340>] ? child_rip+0x0/0x20 [ 10.415290] initcall init_mqueue_fs+0x0/0xee returned 0 after 605468 usecs [ 10.420004] calling key_proc_init+0x0/0x5a @ 1 [ 10.424550] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs [ 10.430004] calling crypto_wq_init+0x0/0x59 @ 1 [ 10.434817] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs [ 10.440049] calling crypto_algapi_init+0x0/0x34 @ 1 [ 10.450014] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs [ 10.456798] calling chainiv_module_init+0x0/0x39 @ 1 [ 10.460007] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.466875] calling eseqiv_module_init+0x0/0x39 @ 1 [ 10.470006] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.480019] calling seqiv_module_init+0x0/0x39 @ 1 [ 10.484895] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.490003] calling hmac_module_init+0x0/0x39 @ 1 [ 10.494789] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.500004] calling crypto_xcbc_module_init+0x0/0x39 @ 1 [ 10.510005] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.517221] calling crypto_null_mod_init+0x0/0xa5 @ 1 [ 10.520117] alg: No test for cipher_null (cipher_null-generic) [ 10.526097] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 10.530179] alg: No test for digest_null (digest_null-generic) [ 10.540174] alg: No test for compress_null (compress_null-generic) [ 10.546359] initcall crypto_null_mod_init+0x0/0xa5 returned 0 after 19531 usecs [ 10.550025] calling md4_mod_init+0x0/0x39 @ 1 [ 10.554659] initcall md4_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.560051] calling md5_mod_init+0x0/0x39 @ 1 [ 10.564663] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.570053] calling rmd128_mod_init+0x0/0x39 @ 1 [ 10.580162] initcall rmd128_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.586677] calling rmd160_mod_init+0x0/0x39 @ 1 [ 10.590216] initcall rmd160_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.596736] calling rmd256_mod_init+0x0/0x39 @ 1 [ 10.600185] initcall rmd256_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.610054] calling sha1_generic_mod_init+0x0/0x39 @ 1 [ 10.615423] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.620022] calling sha256_generic_mod_init+0x0/0x65 @ 1 [ 10.625722] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 0 usecs [ 10.630055] calling wp512_mod_init+0x0/0x8a @ 1 [ 10.640627] initcall wp512_mod_init+0x0/0x8a returned 0 after 0 usecs [ 10.647058] calling tgr192_mod_init+0x0/0x8a @ 1 [ 10.650553] initcall tgr192_mod_init+0x0/0x8a returned 0 after 0 usecs [ 10.657073] calling crypto_ecb_module_init+0x0/0x39 @ 1 [ 10.660173] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.670004] calling crypto_cbc_module_init+0x0/0x39 @ 1 [ 10.675310] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.680004] calling crypto_module_init+0x0/0x39 @ 1 [ 10.684963] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.690003] calling crypto_module_init+0x0/0x39 @ 1 [ 10.700021] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.706798] calling crypto_ctr_module_init+0x0/0x69 @ 1 [ 10.710006] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs [ 10.720004] calling cryptd_init+0x0/0x109 @ 1 [ 10.724450] initcall cryptd_init+0x0/0x109 returned 0 after 0 usecs [ 10.730004] calling des_generic_mod_init+0x0/0x65 @ 1 [ 10.735530] initcall des_generic_mod_init+0x0/0x65 returned 0 after 0 usecs [ 10.740099] calling fcrypt_mod_init+0x0/0x39 @ 1 [ 10.744891] alg: No test for fcrypt (fcrypt-generic) [ 10.751125] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 9765 usecs [ 10.760024] calling blowfish_mod_init+0x0/0x39 @ 1 [ 10.765837] initcall blowfish_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.770024] calling twofish_mod_init+0x0/0x39 @ 1 [ 10.775129] initcall twofish_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.780008] calling aes_init+0x0/0x39 @ 1 [ 10.784301] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 10.790004] calling cast5_mod_init+0x0/0x39 @ 1 [ 10.800209] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.806641] calling cast6_mod_init+0x0/0x39 @ 1 [ 10.810222] initcall cast6_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.816652] calling arc4_init+0x0/0x39 @ 1 [ 10.820198] initcall arc4_init+0x0/0x39 returned 0 after 0 usecs [ 10.826200] calling tea_mod_init+0x0/0x8a @ 1 [ 10.830601] initcall tea_mod_init+0x0/0x8a returned 0 after 0 usecs [ 10.840004] calling khazad_mod_init+0x0/0x39 @ 1 [ 10.844896] initcall khazad_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.850004] calling anubis_mod_init+0x0/0x39 @ 1 [ 10.854984] initcall anubis_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.860004] calling seed_init+0x0/0x39 @ 1 [ 10.864360] initcall seed_init+0x0/0x39 returned 0 after 0 usecs [ 10.870004] calling deflate_mod_init+0x0/0x39 @ 1 [ 10.875615] initcall deflate_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.880004] calling zlib_mod_init+0x0/0x39 @ 1 [ 10.891249] initcall zlib_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.897594] calling michael_mic_init+0x0/0x39 @ 1 [ 10.900195] initcall michael_mic_init+0x0/0x39 returned 0 after 0 usecs [ 10.906797] calling crc32c_mod_init+0x0/0x39 @ 1 [ 10.910215] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.920005] calling crypto_authenc_module_init+0x0/0x39 @ 1 [ 10.925655] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs [ 10.930004] calling lzo_mod_init+0x0/0x39 @ 1 [ 10.934737] initcall lzo_mod_init+0x0/0x39 returned 0 after 0 usecs [ 10.940005] calling krng_mod_init+0x0/0x39 @ 1 [ 10.944614] alg: No test for stdrng (krng) [ 10.950132] initcall krng_mod_init+0x0/0x39 returned 0 after 9765 usecs [ 10.960004] calling proc_genhd_init+0x0/0x63 @ 1 [ 10.964723] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs [ 10.970004] calling bsg_init+0x0/0x155 @ 1 [ 10.974695] device class 'bsg': registering [ 10.980243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 10.987629] initcall bsg_init+0x0/0x155 returned 0 after 9765 usecs [ 10.990004] calling noop_init+0x0/0x3b @ 1 [ 10.994209] io scheduler noop registered (default) [ 11.000004] initcall noop_init+0x0/0x3b returned 0 after 9765 usecs [ 11.006260] calling as_init+0x0/0x3b @ 1 [ 11.010003] io scheduler anticipatory registered [ 11.014617] initcall as_init+0x0/0x3b returned 0 after 0 usecs [ 11.020025] calling deadline_init+0x0/0x3b @ 1 [ 11.024554] io scheduler deadline registered [ 11.030004] initcall deadline_init+0x0/0x3b returned 0 after 9765 usecs [ 11.036607] calling debug_objects_init_debugfs+0x0/0x8a @ 1 [ 11.040035] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs [ 11.050004] calling libcrc32c_mod_init+0x0/0x53 @ 1 [ 11.054967] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs [ 11.060019] calling percpu_counter_startup+0x0/0x54 @ 1 [ 11.065326] initcall percpu_counter_startup+0x0/0x54 returned 0 after 0 usecs [ 11.070007] calling pci_init+0x0/0x60 @ 1 [ 11.080015] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.086272] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.090005] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xe3 [ 11.095834] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.100019] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.110003] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xe3 [ 11.115834] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x4e [ 11.120004] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x63e [ 11.130003] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xe3 [ 11.135834] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.140019] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.170025] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe3 [ 11.175864] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x4e [ 11.180005] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x63e [ 11.186623] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xe3 [ 11.190010] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.200004] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.206609] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xe3 [ 11.210010] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.216270] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.220026] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xe3 [ 11.230010] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.236271] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.240004] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xe3 [ 11.250010] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.256271] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.260019] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xe3 [ 11.265852] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 11.270005] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.280004] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.286607] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xe3 [ 11.290010] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 11.300019] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.306278] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.310003] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xe3 [ 11.320010] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 11.327568] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.330006] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.340018] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xe3 [ 11.345853] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 11.350004] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.360004] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.366607] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xe3 [ 11.370010] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x76 [ 11.380022] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.386278] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.390003] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xe3 [ 11.395833] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x76 [ 11.400006] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x4e [ 11.410004] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x63e [ 11.416609] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xe3 [ 11.420024] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x76 [ 11.430006] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x4e [ 11.436269] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x63e [ 11.440003] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xe3 [ 11.445835] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x76 [ 11.450006] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x4e [ 11.460019] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x63e [ 11.466624] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xe3 [ 11.470010] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.476270] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.480004] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xe3 [ 11.490010] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x4e [ 11.496271] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x63e [ 11.500018] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xe3 [ 11.510004] pci 0000:01:00.0: Boot video device [ 11.514536] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x4e [ 11.520004] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x63e [ 11.526609] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xe3 [ 11.530009] initcall pci_init+0x0/0x60 returned 0 after 439453 usecs [ 11.540019] calling pci_proc_init+0x0/0x90 @ 1 [ 11.544850] initcall pci_proc_init+0x0/0x90 returned 0 after 0 usecs [ 11.550004] calling pci_hotplug_init+0x0/0x74 @ 1 [ 11.554788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.560004] initcall pci_hotplug_init+0x0/0x74 returned 0 after 9765 usecs [ 11.566867] calling zt5550_init+0x0/0xa3 @ 1 [ 11.570002] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 11.580021] bus: 'pci': add driver zt5550_hc [ 11.584558] initcall zt5550_init+0x0/0xa3 returned 0 after 9765 usecs [ 11.590008] calling cpcihp_generic_init+0x0/0x443 @ 1 [ 11.595142] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 11.600002] cpcihp_generic: not configured, disabling. [ 11.605136] initcall cpcihp_generic_init+0x0/0x443 returned -22 after 9765 usecs [ 11.610004] initcall cpcihp_generic_init+0x0/0x443 returned with error code -22 [ 11.620004] calling shpcd_init+0x0/0x88 @ 1 [ 11.624270] bus: 'pci': add driver shpchp [ 11.630040] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver shpchp [ 11.640003] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0b.0 [ 11.647918] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver shpchp [ 11.650019] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0c.0 [ 11.660147] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver shpchp [ 11.670057] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0d.0 [ 11.680157] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver shpchp [ 11.688493] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0e.0 [ 11.690459] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.700058] initcall shpcd_init+0x0/0x88 returned 0 after 78125 usecs [ 11.710004] calling init_legacy+0x0/0x69 @ 1 [ 11.714648] initcall init_legacy+0x0/0x69 returned 0 after 0 usecs [ 11.720004] calling tdo24m_init+0x0/0x39 @ 1 [ 11.724357] bus: 'spi': add driver tdo24m [ 11.730232] initcall tdo24m_init+0x0/0x39 returned 0 after 9765 usecs [ 11.736669] calling kb3886_init+0x0/0x32 @ 1 [ 11.740071] initcall kb3886_init+0x0/0x32 returned -19 after 0 usecs [ 11.746415] calling display_class_init+0x0/0xa5 @ 1 [ 11.750004] device class 'display': registering [ 11.754753] initcall display_class_init+0x0/0xa5 returned 0 after 0 usecs [ 11.760026] calling rand_initialize+0x0/0x58 @ 1 [ 11.764761] initcall rand_initialize+0x0/0x58 returned 0 after 0 usecs [ 11.770004] calling tty_init+0x0/0x11c @ 1 [ 11.774192] device: 'tty': device_add [ 11.780256] device: 'console': device_add [ 11.784483] device: 'tty0': device_add [ 11.790282] device class 'vc': registering [ 11.794596] device: 'vcs': device_add [ 11.800199] device: 'vcsa': device_add [ 11.804190] device: 'vcs1': device_add [ 11.808152] device: 'vcsa1': device_add [ 11.810274] device: 'tty1': device_add [ 11.814291] device: 'tty2': device_add [ 11.820435] device: 'tty3': device_add [ 11.824414] device: 'tty4': device_add [ 11.828383] device: 'tty5': device_add [ 11.830409] device: 'tty6': device_add [ 11.834375] device: 'tty7': device_add [ 11.840251] device: 'tty8': device_add [ 11.844259] device: 'tty9': device_add [ 11.848241] device: 'tty10': device_add [ 11.850251] device: 'tty11': device_add [ 11.854305] device: 'tty12': device_add [ 11.860245] device: 'tty13': device_add [ 11.864310] device: 'tty14': device_add [ 11.868358] device: 'tty15': device_add [ 11.870285] device: 'tty16': device_add [ 11.874341] device: 'tty17': device_add [ 11.880229] device: 'tty18': device_add [ 11.884333] device: 'tty19': device_add [ 11.888387] device: 'tty20': device_add [ 11.890304] device: 'tty21': device_add [ 11.894358] device: 'tty22': device_add [ 11.900234] device: 'tty23': device_add [ 11.904304] device: 'tty24': device_add [ 11.908378] device: 'tty25': device_add [ 11.910285] device: 'tty26': device_add [ 11.914343] device: 'tty27': device_add [ 11.920232] device: 'tty28': device_add [ 11.924323] device: 'tty29': device_add [ 11.930583] device: 'tty30': device_add [ 11.934636] device: 'tty31': device_add [ 11.938689] device: 'tty32': device_add [ 11.940257] device: 'tty33': device_add [ 11.944339] device: 'tty34': device_add [ 11.950425] device: 'tty35': device_add [ 11.954498] device: 'tty36': device_add [ 11.958560] device: 'tty37': device_add [ 11.960312] device: 'tty38': device_add [ 11.964416] device: 'tty39': device_add [ 11.970271] device: 'tty40': device_add [ 11.974362] device: 'tty41': device_add [ 11.978412] device: 'tty42': device_add [ 11.980250] device: 'tty43': device_add [ 11.984308] device: 'tty44': device_add [ 11.990259] device: 'tty45': device_add [ 11.994316] device: 'tty46': device_add [ 12.000630] device: 'tty47': device_add [ 12.004691] device: 'tty48': device_add [ 12.008785] device: 'tty49': device_add [ 12.010226] device: 'tty50': device_add [ 12.014339] device: 'tty51': device_add [ 12.020266] device: 'tty52': device_add [ 12.024375] device: 'tty53': device_add [ 12.028433] device: 'tty54': device_add [ 12.030269] device: 'tty55': device_add [ 12.034336] device: 'tty56': device_add [ 12.040295] device: 'tty57': device_add [ 12.044354] device: 'tty58': device_add [ 12.048448] device: 'tty59': device_add [ 12.050240] device: 'tty60': device_add [ 12.054313] device: 'tty61': device_add [ 12.060252] device: 'tty62': device_add [ 12.064308] device: 'tty63': device_add [ 12.070630] initcall tty_init+0x0/0x11c returned 0 after 292968 usecs [ 12.077059] calling pty_init+0x0/0x35d @ 1 [ 12.080087] device: 'ptmx': device_add [ 12.084072] initcall pty_init+0x0/0x35d returned 0 after 0 usecs [ 12.090036] calling sysrq_init+0x0/0x4c @ 1 [ 12.094322] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs [ 12.100004] calling nozomi_init+0x0/0x153 @ 1 [ 12.104441] Initializing Nozomi driver 2.1d (build date: Aug 2 2009 22:49:23) [ 12.110030] bus: 'pci': add driver nozomi [ 12.114293] initcall nozomi_init+0x0/0x153 returned 0 after 9765 usecs [ 12.120059] calling lp_init_module+0x0/0x259 @ 1 [ 12.124771] device class 'printer': registering [ 12.130247] lp: driver loaded but no devices found [ 12.135032] initcall lp_init_module+0x0/0x259 returned 0 after 9765 usecs [ 12.140025] calling rtc_init+0x0/0x12c @ 1 [ 12.144228] device: 'rtc': device_add [ 12.150263] Real Time Clock Driver v1.12b [ 12.154270] initcall rtc_init+0x0/0x12c returned 0 after 9765 usecs [ 12.160024] calling mod_init+0x0/0x73 @ 1 [ 12.164121] initcall mod_init+0x0/0x73 returned -19 after 0 usecs [ 12.170004] calling ppdev_init+0x0/0xe2 @ 1 [ 12.174277] device class 'ppdev': registering [ 12.180212] ppdev: user-space parallel port driver [ 12.184999] initcall ppdev_init+0x0/0xe2 returned 0 after 9765 usecs [ 12.190007] calling tlclk_init+0x0/0x274 @ 1 [ 12.194382] telclk_interrup = 0xf non-mcpbl0010 hw. [ 12.200030] initcall tlclk_init+0x0/0x274 returned -6 after 9765 usecs [ 12.206547] initcall tlclk_init+0x0/0x274 returned with error code -6 [ 12.210004] calling mwave_init+0x0/0x2ca @ 1 [ 12.220008] smapi::smapi_init, ERROR invalid usSmapiID [ 12.225142] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 12.230025] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 12.240002] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 12.246261] initcall mwave_init+0x0/0x2ca returned -5 after 19531 usecs [ 12.250004] initcall mwave_init+0x0/0x2ca returned with error code -5 [ 12.260004] calling agp_init+0x0/0x4b @ 1 [ 12.264094] Linux agpgart interface v0.103 [ 12.270019] initcall agp_init+0x0/0x4b returned 0 after 9765 usecs [ 12.276192] calling agp_amd64_init+0x0/0xe8 @ 1 [ 12.280003] bus: 'pci': add driver agpgart-amd64 [ 12.285079] initcall agp_amd64_init+0x0/0xe8 returned -19 after 0 usecs [ 12.290005] calling agp_intel_init+0x0/0x50 @ 1 [ 12.294615] bus: 'pci': add driver agpgart-intel [ 12.300241] initcall agp_intel_init+0x0/0x50 returned 0 after 9765 usecs [ 12.306936] calling agp_sis_init+0x0/0x50 @ 1 [ 12.310004] bus: 'pci': add driver agpgart-sis [ 12.314705] initcall agp_sis_init+0x0/0x50 returned 0 after 0 usecs [ 12.320005] calling ipmi_init_msghandler_mod+0x0/0x34 @ 1 [ 12.325482] bus: 'platform': add driver ipmi [ 12.330221] ipmi message handler version 39.2 [ 12.334587] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 9765 usecs [ 12.340005] calling ipmi_wdog_init+0x0/0x153 @ 1 [ 12.350025] IPMI Watchdog: driver initialized [ 12.354383] initcall ipmi_wdog_init+0x0/0x153 returned 0 after 0 usecs [ 12.360006] calling ipmi_poweroff_init+0x0/0xb7 @ 1 [ 12.364969] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 12.370028] initcall ipmi_poweroff_init+0x0/0xb7 returned 0 after 9765 usecs [ 12.380026] calling drm_core_init+0x0/0x145 @ 1 [ 12.384647] device class 'drm': registering [ 12.390287] [drm] Initialized drm 1.1.0 20060810 [ 12.394903] initcall drm_core_init+0x0/0x145 returned 0 after 9765 usecs [ 12.400005] calling mga_init+0x0/0x45 @ 1 [ 12.404137] initcall mga_init+0x0/0x45 returned 0 after 0 usecs [ 12.410004] calling i810_init+0x0/0x45 @ 1 [ 12.414224] initcall i810_init+0x0/0x45 returned 0 after 0 usecs [ 12.420004] calling sis_init+0x0/0x45 @ 1 [ 12.424179] initcall sis_init+0x0/0x45 returned 0 after 0 usecs [ 12.430021] calling savage_init+0x0/0x45 @ 1 [ 12.434606] initcall savage_init+0x0/0x45 returned 0 after 0 usecs [ 12.440026] calling via_init+0x0/0x4a @ 1 [ 12.444219] initcall via_init+0x0/0x4a returned 0 after 0 usecs [ 12.450004] calling serial8250_init+0x0/0x16f @ 1 [ 12.454786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 12.460051] Registering platform device 'serial8250'. Parent at platform [ 12.470005] device: 'serial8250': device_add [ 12.474276] bus: 'platform': add device serial8250 [ 12.480304] async_waiting @ 1 [ 12.483281] async_continuing @ 1 after 0 usec [ 12.620064] async_waiting @ 1 [ 12.623031] async_continuing @ 1 after 0 usec �[ 12.760103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.766120] device: 'ttyS0': device_add [ 12.770255] device: 'ttyS1': device_add [ 12.774346] device: 'ttyS2': device_add [ 12.778434] device: 'ttyS3': device_add [ 12.780253] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 12.787549] bus: 'platform': add driver serial8250 [ 12.790015] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 12.800003] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 12.810011] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 12.817048] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 12.820248] initcall serial8250_init+0x0/0x16f returned 0 after 361328 usecs [ 12.830029] calling jsm_init_module+0x0/0x6e @ 1 [ 12.834778] bus: 'pci': add driver jsm [ 12.840253] initcall jsm_init_module+0x0/0x6e returned 0 after 9765 usecs [ 12.847033] calling init_kgdboc+0x0/0x3b @ 1 [ 12.850006] initcall init_kgdboc+0x0/0x3b returned 0 after 0 usecs [ 12.860004] calling parport_default_proc_register+0x0/0x42 @ 1 [ 12.865956] initcall parport_default_proc_register+0x0/0x42 returned 0 after 0 usecs [ 12.870003] calling parport_pc_init+0x0/0x355 @ 1 [ 12.874789] bus: 'platform': add driver parport_pc [ 12.880233] IT8712 SuperIO detected. [ 12.884151] Registering platform device 'parport_pc.956'. Parent at platform [ 12.890027] device: 'parport_pc.956': device_add [ 12.894648] bus: 'platform': add device parport_pc.956 [ 12.900217] bus: 'platform': driver_probe_device: matched device parport_pc.956 with driver parport_pc [ 12.910004] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.956 [ 12.920011] driver: 'parport_pc.956': driver_bound: bound to device 'parport_pc' [ 12.930005] bus: 'platform': really_probe: bound device parport_pc.956 to driver parport_pc [ 12.938429] bus: 'platform': remove device parport_pc.956 [ 12.940237] Registering platform device 'parport_pc.888'. Parent at platform [ 12.950027] device: 'parport_pc.888': device_add [ 12.954647] bus: 'platform': add device parport_pc.888 [ 12.960217] bus: 'platform': driver_probe_device: matched device parport_pc.888 with driver parport_pc [ 12.970004] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.888 [ 12.978693] driver: 'parport_pc.888': driver_bound: bound to device 'parport_pc' [ 12.980003] bus: 'platform': really_probe: bound device parport_pc.888 to driver parport_pc [ 12.990053] parport0: PC-style at 0x378 (0x778)async_waiting @ 1 [ 13.000003] async_continuing @ 1 after 0 usec [ 13.141034] [PCSPP,TRISTATE] [ 13.144052] parport0: irq 7 detected [ 13.220165] device: 'parport0': device_add [ 13.224600] device: 'lp0': device_add [ 13.228517] lp0: using parport0 (polling). [ 13.230028] lp0: console ready [ 13.233086] Registering platform device 'parport_pc.632'. Parent at platform [ 13.240005] device: 'parport_pc.632': device_add [ 13.244621] bus: 'platform': add device parport_pc.632 [ 13.250227] bus: 'platform': driver_probe_device: matched device parport_pc.632 with driver parport_pc [ 13.260082] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.632 [ 13.270011] driver: 'parport_pc.632': driver_bound: bound to device 'parport_pc' [ 13.277396] bus: 'platform': really_probe: bound device parport_pc.632 to driver parport_pc [ 13.280073] bus: 'platform': remove device parport_pc.632 [ 13.290235] bus: 'pci': add driver parport_pc [ 13.294830] initcall parport_pc_init+0x0/0x355 returned 0 after 410156 usecs [ 13.300072] calling topology_sysfs_init+0x0/0x82 @ 1 [ 13.305154] initcall topology_sysfs_init+0x0/0x82 returned 0 after 0 usecs [ 13.310004] calling floppy_init+0x0/0xe23 @ 1 [ 13.320089] Platform driver 'floppy' needs updating - please use dev_pm_ops [ 13.327040] bus: 'platform': add driver floppy [ 13.330346] Floppy drive(s): fd0 is 1.44M [ 13.353888] FDC 0 is a post-1991 82077 [ 13.358610] Registering platform device 'floppy.0'. Parent at platform [ 13.360022] device: 'floppy.0': device_add [ 13.364131] bus: 'platform': add device floppy.0 [ 13.370229] bus: 'platform': driver_probe_device: matched device floppy.0 with driver floppy [ 13.380005] bus: 'platform': really_probe: probing driver floppy with device floppy.0 [ 13.390011] driver: 'floppy.0': driver_bound: bound to device 'floppy' [ 13.396528] bus: 'platform': really_probe: bound device floppy.0 to driver floppy [ 13.400012] device: 'fd0': device_add [ 13.404023] device: '2:0': device_add [ 13.410281] initcall floppy_init+0x0/0xe23 returned 0 after 87890 usecs [ 13.416885] calling loop_init+0x0/0x1bc @ 1 [ 13.420291] device: 'loop0': device_add [ 13.424478] device: '7:0': device_add [ 13.430289] device: 'loop1': device_add [ 13.434513] device: '7:1': device_add [ 13.438420] device: 'loop2': device_add [ 13.440317] device: '7:2': device_add [ 13.444257] device: 'loop3': device_add [ 13.450344] device: '7:3': device_add [ 13.454278] device: 'loop4': device_add [ 13.460327] device: '7:4': device_add [ 13.464225] device: 'loop5': device_add [ 13.468373] device: '7:5': device_add [ 13.470313] device: 'loop6': device_add [ 13.474463] device: '7:6': device_add [ 13.480406] device: 'loop7': device_add [ 13.484580] device: '7:7': device_add [ 13.488499] loop: module loaded [ 13.490060] initcall loop_init+0x0/0x1bc returned 0 after 68359 usecs [ 13.496494] calling cpqarray_init+0x0/0x2ba @ 1 [ 13.500003] Compaq SMART2 Driver (v 2.6.0) [ 13.504097] bus: 'pci': add driver cpqarray [ 13.510267] bus: 'pci': remove driver cpqarray [ 13.514924] driver: 'cpqarray': driver_release [ 13.520039] initcall cpqarray_init+0x0/0x2ba returned -19 after 19531 usecs [ 13.526988] calling cciss_init+0x0/0x7a @ 1 [ 13.530006] HP CISS Driver (v 3.6.20) [ 13.533907] bus: 'cciss': registered [ 13.537481] bus: 'pci': add driver cciss [ 13.540286] initcall cciss_init+0x0/0x7a returned 0 after 9765 usecs [ 13.546635] calling DAC960_init_module+0x0/0x78 @ 1 [ 13.550022] bus: 'pci': add driver DAC960 [ 13.554272] device: 'dac960_gam': device_add [ 13.560269] initcall DAC960_init_module+0x0/0x78 returned 0 after 9765 usecs [ 13.570004] calling nbd_init+0x0/0x305 @ 1 [ 13.574962] nbd: registered device at major 43 [ 13.580017] device: 'nbd0': device_add [ 13.584088] device: '43:0': device_add [ 13.588076] device: 'nbd1': device_add [ 13.590350] device: '43:1': device_add [ 13.594362] device: 'nbd2': device_add [ 13.600360] device: '43:2': device_add [ 13.604370] device: 'nbd3': device_add [ 13.608423] device: '43:3': device_add [ 13.610309] device: 'nbd4': device_add [ 13.614390] device: '43:4': device_add [ 13.620243] device: 'nbd5': device_add [ 13.624356] device: '43:5': device_add [ 13.628339] device: 'nbd6': device_add [ 13.630400] device: '43:6': device_add [ 13.634399] device: 'nbd7': device_add [ 13.640345] device: '43:7': device_add [ 13.644381] device: 'nbd8': device_add [ 13.648451] device: '43:8': device_add [ 13.650295] device: 'nbd9': device_add [ 13.654368] device: '43:9': device_add [ 13.660259] device: 'nbd10': device_add [ 13.664438] device: '43:10': device_add [ 13.668513] device: 'nbd11': device_add [ 13.670381] device: '43:11': device_add [ 13.674452] device: 'nbd12': device_add [ 13.680325] device: '43:12': device_add [ 13.684445] device: 'nbd13': device_add [ 13.690703] device: '43:13': device_add [ 13.694776] device: 'nbd14': device_add [ 13.698967] device: '43:14': device_add [ 13.700273] device: 'nbd15': device_add [ 13.704518] device: '43:15': device_add [ 13.710264] initcall nbd_init+0x0/0x305 returned 0 after 136718 usecs [ 13.716692] calling init_cryptoloop+0x0/0x55 @ 1 [ 13.720005] initcall init_cryptoloop+0x0/0x55 returned 0 after 0 usecs [ 13.726519] calling ibmasm_init+0x0/0x8a @ 1 [ 13.730020] bus: 'pci': add driver ibmasm [ 13.734266] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 13.740010] initcall ibmasm_init+0x0/0x8a returned 0 after 9765 usecs [ 13.750003] calling ics932s401_init+0x0/0x3b @ 1 [ 13.754701] bus: 'i2c': add driver ics932s401 [ 13.760342] initcall ics932s401_init+0x0/0x3b returned 0 after 9765 usecs [ 13.767121] calling tifm_7xx1_init+0x0/0x42 @ 1 [ 13.770003] bus: 'pci': add driver tifm_7xx1 [ 13.774495] initcall tifm_7xx1_init+0x0/0x42 returned 0 after 0 usecs [ 13.780005] calling phantom_init+0x0/0x12f @ 1 [ 13.784527] device class 'phantom': registering [ 13.790251] bus: 'pci': add driver phantom [ 13.794592] Phantom Linux Driver, version n0.9.8, init OK [ 13.800005] initcall phantom_init+0x0/0x12f returned 0 after 19531 usecs [ 13.806703] calling ioc4_init+0x0/0x47 @ 1 [ 13.810004] bus: 'pci': add driver IOC4 [ 13.814066] initcall ioc4_init+0x0/0x47 returned 0 after 0 usecs [ 13.820004] calling ilo_init+0x0/0xb8 @ 1 [ 13.824095] device class 'iLO': registering [ 13.830230] bus: 'pci': add driver hpilo [ 13.834403] initcall ilo_init+0x0/0xb8 returned 0 after 9765 usecs [ 13.840005] calling c2port_init+0x0/0x77 @ 1 [ 13.844353] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 13.850004] device class 'c2port': registering [ 13.854653] initcall c2port_init+0x0/0x77 returned 0 after 9765 usecs [ 13.860005] calling duramar2150_c2port_init+0x0/0x97 @ 1 [ 13.865489] device: 'c2port0': device_add [ 13.870286] c2port c2port0: C2 port uc added [ 13.874553] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 13.880006] initcall duramar2150_c2port_init+0x0/0x97 returned 0 after 19531 usecs [ 13.890004] calling at24_init+0x0/0x5d @ 1 [ 13.894183] bus: 'i2c': add driver at24 [ 13.900218] initcall at24_init+0x0/0x5d returned 0 after 9765 usecs [ 13.906478] calling at25_init+0x0/0x39 @ 1 [ 13.910005] bus: 'spi': add driver at25 [ 13.914068] initcall at25_init+0x0/0x39 returned 0 after 0 usecs [ 13.920004] calling eeprom_init+0x0/0x3b @ 1 [ 13.924355] bus: 'i2c': add driver eeprom [ 13.930221] initcall eeprom_init+0x0/0x3b returned 0 after 9765 usecs [ 13.936649] calling max6875_init+0x0/0x3b @ 1 [ 13.940004] bus: 'i2c': add driver max6875 [ 13.944328] initcall max6875_init+0x0/0x3b returned 0 after 0 usecs [ 13.950004] calling cb710_init_module+0x0/0x42 @ 1 [ 13.954875] bus: 'pci': add driver cb710 [ 13.960243] initcall cb710_init_module+0x0/0x42 returned 0 after 9765 usecs [ 13.967196] calling pasic3_base_init+0x0/0x40 @ 1 [ 13.970006] bus: 'platform': add driver pasic3 [ 13.974735] bus: 'platform': remove driver pasic3 [ 13.980211] driver: 'pasic3': driver_release [ 13.984481] initcall pasic3_base_init+0x0/0x40 returned -19 after 9765 usecs [ 13.990004] calling ezx_pcap_init+0x0/0x39 @ 1 [ 13.994529] bus: 'spi': add driver ezx-pcap [ 14.000221] initcall ezx_pcap_init+0x0/0x39 returned 0 after 9765 usecs [ 14.006825] calling scsi_tgt_init+0x0/0xb1 @ 1 [ 14.010805] device: 'tgt': device_add [ 14.014740] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 0 usecs [ 14.020005] calling raid_init+0x0/0x39 @ 1 [ 14.024179] device class 'raid_devices': registering [ 14.030238] initcall raid_init+0x0/0x39 returned 0 after 9765 usecs [ 14.040012] calling spi_transport_init+0x0/0x9f @ 1 [ 14.044984] device class 'spi_transport': registering [ 14.050240] device class 'spi_host': registering [ 14.055093] initcall spi_transport_init+0x0/0x9f returned 0 after 9765 usecs [ 14.060005] calling fc_transport_init+0x0/0x73 @ 1 [ 14.064872] device class 'fc_host': registering [ 14.070212] device class 'fc_vports': registering [ 14.075112] device class 'fc_remote_ports': registering [ 14.080259] device class 'fc_transport': registering [ 14.085424] initcall fc_transport_init+0x0/0x73 returned 0 after 19531 usecs [ 14.090004] calling iscsi_transport_init+0x0/0x173 @ 1 [ 14.100002] Loading iSCSI transport class v2.0-870. [ 14.104874] device class 'iscsi_transport': registering [ 14.110211] device class 'iscsi_endpoint': registering [ 14.115545] device class 'iscsi_host': registering [ 14.120292] device class 'iscsi_connection': registering [ 14.125804] device class 'iscsi_session': registering [ 14.130326] initcall iscsi_transport_init+0x0/0x173 returned 0 after 29296 usecs [ 14.137714] calling sas_transport_init+0x0/0xe1 @ 1 [ 14.140004] device class 'sas_host': registering [ 14.144883] device class 'sas_phy': registering [ 14.150213] device class 'sas_port': registering [ 14.155050] device class 'sas_device': registering [ 14.160231] device class 'sas_end_device': registering [ 14.165601] device class 'sas_expander': registering [ 14.170215] initcall sas_transport_init+0x0/0xe1 returned 0 after 29296 usecs [ 14.180005] calling sas_class_init+0x0/0x58 @ 1 [ 14.185105] initcall sas_class_init+0x0/0x58 returned 0 after 0 usecs [ 14.190004] calling srp_transport_init+0x0/0x65 @ 1 [ 14.194959] device class 'srp_host': registering [ 14.200216] device class 'srp_remote_ports': registering [ 14.205760] initcall srp_transport_init+0x0/0x65 returned 0 after 9765 usecs [ 14.210005] calling libfc_init+0x0/0x96 @ 1 [ 14.220974] initcall libfc_init+0x0/0x96 returned 0 after 9765 usecs [ 14.227325] calling fcoe_init+0x0/0x1ab @ 1 [ 14.230260] initcall fcoe_init+0x0/0x1ab returned 0 after 0 usecs [ 14.236345] calling fnic_init_module+0x0/0x20d @ 1 [ 14.240004] fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121 [ 14.246678] bus: 'pci': add driver fnic [ 14.250264] initcall fnic_init_module+0x0/0x20d returned 0 after 9765 usecs [ 14.260010] calling BusLogic_init+0x0/0x1830 @ 1 [ 14.264807] initcall BusLogic_init+0x0/0x1830 returned 0 after 0 usecs [ 14.270004] calling adpt_init+0x0/0xe95 @ 1 [ 14.274267] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 14.280002] Detecting Adaptec I2O RAID controllers... [ 14.285060] initcall adpt_init+0x0/0xe95 returned -19 after 9765 usecs [ 14.290006] calling arcmsr_module_init+0x0/0x47 @ 1 [ 14.294962] bus: 'pci': add driver arcmsr [ 14.300267] initcall arcmsr_module_init+0x0/0x47 returned 0 after 9765 usecs [ 14.307310] calling ahc_linux_init+0x0/0x8d @ 1 [ 14.310009] bus: 'pci': add driver aic7xxx [ 14.314401] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs [ 14.320004] calling ahd_linux_init+0x0/0xa7 @ 1 [ 14.324617] bus: 'pci': add driver aic79xx [ 14.330254] initcall ahd_linux_init+0x0/0xa7 returned 0 after 9765 usecs [ 14.340005] calling aac_init+0x0/0x95 @ 1 [ 14.344096] Adaptec aacraid driver 1.1-5[2461]-ms [ 14.348800] bus: 'pci': add driver aacraid [ 14.350259] initcall aac_init+0x0/0x95 returned 0 after 9765 usecs [ 14.360005] calling init_this_scsi_driver+0x0/0x10c @ 1 [ 14.365676] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs [ 14.370004] calling ips_module_init+0x0/0x3b7 @ 1 [ 14.374790] bus: 'pci': add driver ips [ 14.380260] bus: 'pci': remove driver ips [ 14.384468] driver: 'ips': driver_release [ 14.390009] initcall ips_module_init+0x0/0x3b7 returned -19 after 19531 usecs [ 14.397135] calling init_this_scsi_driver+0x0/0x10c @ 1 [ 14.400058] scsi: <fdomain> Detection failed (no card) [ 14.405188] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs [ 14.410004] calling qla1280_init+0x0/0x42 @ 1 [ 14.414443] bus: 'pci': add driver qla1280 [ 14.420234] initcall qla1280_init+0x0/0x42 returned 0 after 9765 usecs [ 14.430028] calling qla2x00_module_init+0x0/0x152 @ 1 [ 14.435704] QLogic Fibre Channel HBA Driver: 8.03.01-k4 [ 14.440005] bus: 'pci': add driver qla2xxx [ 14.444372] initcall qla2x00_module_init+0x0/0x152 returned 0 after 9765 usecs [ 14.450005] calling dc395x_module_init+0x0/0x42 @ 1 [ 14.454970] bus: 'pci': add driver dc395x [ 14.460235] initcall dc395x_module_init+0x0/0x42 returned 0 after 9765 usecs [ 14.467275] calling dc390_module_init+0x0/0xbf @ 1 [ 14.470003] DC390: clustering now enabled by default. If you get problems load [ 14.480002] with "disable_clustering=1" and report to maintainers [ 14.486694] bus: 'pci': add driver tmscsim [ 14.490236] initcall dc390_module_init+0x0/0xbf returned 0 after 19531 usecs [ 14.497275] calling mraid_mm_init+0x0/0xa7 @ 1 [ 14.500004] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 14.510010] device: 'megadev0': device_add [ 14.514341] initcall mraid_mm_init+0x0/0xa7 returned 0 after 9765 usecs [ 14.520008] calling megaraid_init+0x0/0xbc @ 1 [ 14.524538] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 14.530006] bus: 'pci': add driver megaraid [ 14.534429] initcall megaraid_init+0x0/0xbc returned 0 after 9765 usecs [ 14.540005] calling megasas_init+0x0/0x180 @ 1 [ 14.544528] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 14.550014] bus: 'pci': add driver megaraid_sas [ 14.554778] initcall megasas_init+0x0/0x180 returned 0 after 9765 usecs [ 14.560005] calling _scsih_init+0x0/0x117 @ 1 [ 14.570003] mpt2sas version 01.100.03.00 loaded [ 14.574556] device: 'mpt2ctl': device_add [ 14.578801] bus: 'pci': add driver mpt2sas [ 14.580275] initcall _scsih_init+0x0/0x117 returned 0 after 9765 usecs [ 14.590004] calling inia100_init+0x0/0x42 @ 1 [ 14.594442] bus: 'pci': add driver inia100 [ 14.598768] initcall inia100_init+0x0/0x42 returned 0 after 0 usecs [ 14.600005] calling tw_init+0x0/0x55 @ 1 [ 14.604007] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 14.610003] bus: 'pci': add driver 3w-xxxx [ 14.620234] initcall tw_init+0x0/0x55 returned 0 after 19531 usecs [ 14.626409] calling twa_init+0x0/0x55 @ 1 [ 14.630006] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. [ 14.637308] bus: 'pci': add driver 3w-9xxx [ 14.640235] initcall twa_init+0x0/0x55 returned 0 after 9765 usecs [ 14.646408] calling ppa_driver_init+0x0/0x4c @ 1 [ 14.650004] ppa: Version 2.07 (for Linux 2.4.x) [ 14.660401] initcall ppa_driver_init+0x0/0x4c returned 0 after 9765 usecs [ 14.667177] calling ipr_init+0x0/0x5c @ 1 [ 14.670003] ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009) [ 14.677472] bus: 'pci': add driver ipr [ 14.680237] initcall ipr_init+0x0/0x5c returned 0 after 9765 usecs [ 14.686410] calling hptiop_module_init+0x0/0x5c @ 1 [ 14.690004] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203) [ 14.696000] bus: 'pci': add driver hptiop [ 14.700247] initcall hptiop_module_init+0x0/0x5c returned 0 after 9765 usecs [ 14.710005] calling stex_init+0x0/0x55 @ 1 [ 14.714179] stex: Promise SuperTrak EX Driver version: 4.6.0000.3 [ 14.720004] bus: 'pci': add driver stex [ 14.724070] initcall stex_init+0x0/0x55 returned 0 after 9765 usecs [ 14.730007] calling mvs_init+0x0/0x79 @ 1 [ 14.734124] bus: 'pci': add driver mvsas [ 14.740230] initcall mvs_init+0x0/0x79 returned 0 after 9765 usecs [ 14.746406] calling cxgb3i_init_module+0x0/0x5d @ 1 [ 14.750004] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 14.755763] device: 'cxgb3i': device_add [ 14.760229] iscsi: registered transport (cxgb3i) [ 14.764858] initcall cxgb3i_init_module+0x0/0x5d returned 0 after 9765 usecs [ 14.770005] calling init_sd+0x0/0x106 @ 1 [ 14.774124] device class 'scsi_disk': registering [ 14.780221] bus: 'scsi': add driver sd [ 14.784214] initcall init_sd+0x0/0x106 returned 0 after 9765 usecs [ 14.790005] calling init_sr+0x0/0x6f @ 1 [ 14.794009] bus: 'scsi': add driver sr [ 14.800331] initcall init_sr+0x0/0x6f returned 0 after 9765 usecs [ 14.806414] calling init_sg+0x0/0x170 @ 1 [ 14.810006] device class 'scsi_generic': registering [ 14.815284] initcall init_sg+0x0/0x170 returned 0 after 0 usecs [ 14.820005] calling ahci_init+0x0/0x42 @ 1 [ 14.824184] bus: 'pci': add driver ahci [ 14.830024] initcall ahci_init+0x0/0x42 returned 0 after 9765 usecs [ 14.836285] calling k2_sata_init+0x0/0x42 @ 1 [ 14.840004] bus: 'pci': add driver sata_svw [ 14.844415] initcall k2_sata_init+0x0/0x42 returned 0 after 0 usecs [ 14.850005] calling piix_init+0x0/0x50 @ 1 [ 14.854183] bus: 'pci': add driver ata_piix [ 14.860179] initcall piix_init+0x0/0x50 returned 0 after 9765 usecs [ 14.866440] calling pdc_ata_init+0x0/0x42 @ 1 [ 14.870005] bus: 'pci': add driver sata_promise [ 14.874793] initcall pdc_ata_init+0x0/0x42 returned 0 after 0 usecs [ 14.880004] calling qs_ata_init+0x0/0x42 @ 1 [ 14.884357] bus: 'pci': add driver sata_qstor [ 14.890250] initcall qs_ata_init+0x0/0x42 returned 0 after 9765 usecs [ 14.896685] calling sil_init+0x0/0x42 @ 1 [ 14.900005] bus: 'pci': add driver sata_sil [ 14.904436] initcall sil_init+0x0/0x42 returned 0 after 0 usecs [ 14.910004] calling sil24_init+0x0/0x42 @ 1 [ 14.914267] bus: 'pci': add driver sata_sil24 [ 14.920239] initcall sil24_init+0x0/0x42 returned 0 after 9765 usecs [ 14.926582] calling svia_init+0x0/0x42 @ 1 [ 14.930007] bus: 'pci': add driver sata_via [ 14.934454] initcall svia_init+0x0/0x42 returned 0 after 0 usecs [ 14.940004] calling sis_init+0x0/0x42 @ 1 [ 14.944097] bus: 'pci': add driver sata_sis [ 14.950230] initcall sis_init+0x0/0x42 returned 0 after 9765 usecs [ 14.956407] calling pdc_sata_init+0x0/0x42 @ 1 [ 14.960005] bus: 'pci': add driver sata_sx4 [ 14.964447] initcall pdc_sata_init+0x0/0x42 returned 0 after 0 usecs [ 14.970004] calling nv_init+0x0/0x42 @ 1 [ 14.974010] bus: 'pci': add driver sata_nv [ 14.980309] initcall nv_init+0x0/0x42 returned 0 after 9765 usecs [ 14.986399] calling uli_init+0x0/0x42 @ 1 [ 14.990005] bus: 'pci': add driver sata_uli [ 14.994411] initcall uli_init+0x0/0x42 returned 0 after 0 usecs [ 15.000005] calling mv_init+0x0/0x6e @ 1 [ 15.004009] bus: 'pci': add driver sata_mv [ 15.008395] bus: 'platform': add driver sata_mv [ 15.010225] initcall mv_init+0x0/0x6e returned 0 after 9765 usecs [ 15.020005] calling amd_init+0x0/0x42 @ 1 [ 15.024096] bus: 'pci': add driver pata_amd [ 15.028292] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd [ 15.030005] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0 [ 15.040115] pata_amd 0000:00:06.0: version 0.4.1 [ 15.044825] pata_amd 0000:00:06.0: setting latency timer to 64 [ 15.050275] scsi0 : pata_amd [ 15.054088] device: 'host0': device_add [ 15.060017] device: 'host0': device_add [ 15.064261] scsi1 : pata_amd [ 15.070009] device: 'host1': device_add [ 15.073859] device: 'host1': device_add [ 15.077990] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 15.080004] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 15.280546] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 15.286804] ata1.00: 488397168 sectors, multi 1: LBA48 [ 15.290044] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 [ 15.370475] ata1.00: configured for UDMA/100 [ 15.384754] async_waiting @ 1360 [ 15.387981] async_continuing @ 1360 after 0 usec [ 15.390285] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 15.400009] device: 'target0:0:0': device_add [ 15.404376] device: '0:0:0:0': device_add [ 15.408436] bus: 'scsi': add device 0:0:0:0 [ 15.410267] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd [ 15.420019] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0 [ 15.427161] device: '0:0:0:0': device_add [ 15.430402] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 15.440228] sd 0:0:0:0: [sda] Write Protect is off [ 15.445012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.450106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.459143] device: 'sda': device_add [ 15.460589] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 15.545548] device: 'sda1': device_add [ 15.549369] device: 'sda2': device_add [ 15.550125] device: 'sda3': device_add [ 15.553952] device: 'sda5': device_add [ 15.560067] device: 'sda6': device_add [ 15.563871] device: 'sda7': device_add [ 15.567682] device: 'sda8': device_add [ 15.570083] device: 'sda9': device_add [ 15.573891] device: 'sda10': device_add [ 15.582455] device: '8:0': device_add [ 15.586805] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.590029] driver: '0:0:0:0': driver_bound: bound to device 'sd' [ 15.596113] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd [ 15.600009] device: '0:0:0:0': device_add [ 15.604334] device: 'sg0': device_add [ 15.610381] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.615766] device: '0:0:0:0': device_add [ 15.620310] async_waiting @ 1360 [ 15.623540] async_continuing @ 1360 after 0 usec [ 15.800299] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 [ 15.806323] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 [ 15.860251] ata2.01: configured for UDMA/33 [ 15.875113] async_waiting @ 1360 [ 15.878342] async_continuing @ 1360 after 0 usec [ 15.880431] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 [ 15.890018] device: 'target1:0:1': device_add [ 15.894387] device: '1:0:1:0': device_add [ 15.898442] bus: 'scsi': add device 1:0:1:0 [ 15.911921] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd [ 15.919566] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0 [ 15.920033] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr [ 15.930005] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0 [ 15.944171] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray [ 15.950089] Uniform CD-ROM driver Revision: 3.20 [ 15.954799] device: 'sr0': device_add [ 15.970664] device: '11:0': device_add [ 15.974976] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 15.979590] driver: '1:0:1:0': driver_bound: bound to device 'sr' [ 15.980030] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr [ 15.990008] device: '1:0:1:0': device_add [ 15.994476] device: 'sg1': device_add [ 16.011019] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 16.016337] device: '1:0:1:0': device_add [ 16.032231] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd' [ 16.039304] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd [ 16.051101] initcall amd_init+0x0/0x42 returned 0 after 1005859 usecs [ 16.057540] calling artop_init+0x0/0x42 @ 1 [ 16.060030] bus: 'pci': add driver pata_artop [ 16.074802] initcall artop_init+0x0/0x42 returned 0 after 9765 usecs [ 16.080011] calling cmd640_init+0x0/0x42 @ 1 [ 16.084365] bus: 'pci': add driver pata_cmd640 [ 16.092518] initcall cmd640_init+0x0/0x42 returned 0 after 9765 usecs [ 16.098955] calling cmd64x_init+0x0/0x42 @ 1 [ 16.100009] bus: 'pci': add driver pata_cmd64x [ 16.114910] initcall cmd64x_init+0x0/0x42 returned 0 after 9765 usecs [ 16.120008] calling cs5520_init+0x0/0x42 @ 1 [ 16.124366] bus: 'pci': add driver pata_cs5520 [ 16.141108] initcall cs5520_init+0x0/0x42 returned 0 after 19531 usecs [ 16.147629] calling cy82c693_init+0x0/0x42 @ 1 [ 16.150030] bus: 'pci': add driver pata_cypress [ 16.165147] initcall cy82c693_init+0x0/0x42 returned 0 after 9765 usecs [ 16.170007] calling hpt36x_init+0x0/0x42 @ 1 [ 16.174365] bus: 'pci': add driver pata_hpt366 [ 16.190432] initcall hpt36x_init+0x0/0x42 returned 0 after 19531 usecs [ 16.196952] calling hpt37x_init+0x0/0x42 @ 1 [ 16.200007] bus: 'pci': add driver pata_hpt37x [ 16.215004] initcall hpt37x_init+0x0/0x42 returned 0 after 9765 usecs [ 16.220007] calling hpt3x3_init+0x0/0x42 @ 1 [ 16.224365] bus: 'pci': add driver pata_hpt3x3 [ 16.242184] initcall hpt3x3_init+0x0/0x42 returned 0 after 19531 usecs [ 16.248706] calling it8213_init+0x0/0x42 @ 1 [ 16.250013] bus: 'pci': add driver pata_it8213 [ 16.264853] initcall it8213_init+0x0/0x42 returned 0 after 9765 usecs [ 16.270010] calling jmicron_init+0x0/0x42 @ 1 [ 16.274453] bus: 'pci': add driver pata_jmicron [ 16.291973] initcall jmicron_init+0x0/0x42 returned 0 after 19531 usecs [ 16.298583] calling ninja32_init+0x0/0x42 @ 1 [ 16.300008] bus: 'pci': add driver pata_ninja32 [ 16.314946] initcall ninja32_init+0x0/0x42 returned 0 after 9765 usecs [ 16.320012] calling ns87410_init+0x0/0x42 @ 1 [ 16.324451] bus: 'pci': add driver pata_ns87410 [ 16.340961] initcall ns87410_init+0x0/0x42 returned 0 after 19531 usecs [ 16.347564] calling ns87415_init+0x0/0x42 @ 1 [ 16.350013] bus: 'pci': add driver pata_ns87415 [ 16.364940] initcall ns87415_init+0x0/0x42 returned 0 after 9765 usecs [ 16.370008] calling opti_init+0x0/0x42 @ 1 [ 16.374194] bus: 'pci': add driver pata_opti [ 16.390368] initcall opti_init+0x0/0x42 returned 0 after 19531 usecs [ 16.396714] calling optidma_init+0x0/0x42 @ 1 [ 16.400009] bus: 'pci': add driver pata_optidma [ 16.415069] initcall optidma_init+0x0/0x42 returned 0 after 9765 usecs [ 16.420029] calling marvell_init+0x0/0x42 @ 1 [ 16.424471] bus: 'pci': add driver pata_marvell [ 16.441598] initcall marvell_init+0x0/0x42 returned 0 after 19531 usecs [ 16.448200] calling mpiix_init+0x0/0x42 @ 1 [ 16.450008] bus: 'pci': add driver pata_mpiix [ 16.464783] initcall mpiix_init+0x0/0x42 returned 0 after 9765 usecs [ 16.470007] calling oldpiix_init+0x0/0x42 @ 1 [ 16.474451] bus: 'pci': add driver pata_oldpiix [ 16.490954] initcall oldpiix_init+0x0/0x42 returned 0 after 19531 usecs [ 16.497558] calling pdc2027x_init+0x0/0x42 @ 1 [ 16.500008] bus: 'pci': add driver pata_pdc2027x [ 16.515026] initcall pdc2027x_init+0x0/0x42 returned 0 after 9765 usecs [ 16.520029] calling pdc202xx_init+0x0/0x42 @ 1 [ 16.524558] bus: 'pci': add driver pata_pdc202xx_old [ 16.540625] initcall pdc202xx_init+0x0/0x42 returned 0 after 19531 usecs [ 16.547322] calling sc1200_init+0x0/0x42 @ 1 [ 16.550012] bus: 'pci': add driver sc1200 [ 16.564438] initcall sc1200_init+0x0/0x42 returned 0 after 9765 usecs [ 16.570013] calling serverworks_init+0x0/0x42 @ 1 [ 16.574799] bus: 'pci': add driver pata_serverworks [ 16.590974] initcall serverworks_init+0x0/0x42 returned 0 after 19531 usecs [ 16.597924] calling via_init+0x0/0x42 @ 1 [ 16.600009] bus: 'pci': add driver pata_via [ 16.614600] initcall via_init+0x0/0x42 returned 0 after 9765 usecs [ 16.620029] calling sl82c105_init+0x0/0x42 @ 1 [ 16.624556] bus: 'pci': add driver pata_sl82c105 [ 16.641839] initcall sl82c105_init+0x0/0x42 returned 0 after 19531 usecs [ 16.648529] calling sis_init+0x0/0x42 @ 1 [ 16.650009] bus: 'pci': add driver pata_sis [ 16.664603] initcall sis_init+0x0/0x42 returned 0 after 9765 usecs [ 16.670008] calling triflex_init+0x0/0x42 @ 1 [ 16.674452] bus: 'pci': add driver pata_triflex [ 16.689405] initcall triflex_init+0x0/0x42 returned 0 after 9765 usecs [ 16.690012] calling sch_init+0x0/0x42 @ 1 [ 16.700005] bus: 'pci': add driver pata_sch [ 16.714591] initcall sch_init+0x0/0x42 returned 0 after 9765 usecs [ 16.720012] calling pata_platform_init+0x0/0x39 @ 1 [ 16.724971] bus: 'platform': add driver pata_platform [ 16.741084] initcall pata_platform_init+0x0/0x39 returned 0 after 19531 usecs [ 16.748211] calling e1000_init_module+0x0/0xab @ 1 [ 16.750006] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 16.756442] Copyright (c) 1999-2006 Intel Corporation. [ 16.760005] bus: 'pci': add driver e1000 [ 16.774336] initcall e1000_init_module+0x0/0xab returned 0 after 19531 usecs [ 16.780008] calling e1000_init_module+0x0/0x8f @ 1 [ 16.784883] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 16.790003] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 16.795831] bus: 'pci': add driver e1000e [ 16.810833] initcall e1000_init_module+0x0/0x8f returned 0 after 29296 usecs [ 16.817873] calling igb_init_module+0x0/0x7b @ 1 [ 16.820009] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 16.826701] Copyright (c) 2007-2009 Intel Corporation. [ 16.830009] bus: 'pci': add driver igb [ 16.844353] initcall igb_init_module+0x0/0x7b returned 0 after 19531 usecs [ 16.850006] calling ixgbe_init_module+0x0/0x7f @ 1 [ 16.854881] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.34-k2 [ 16.860003] ixgbe: Copyright (c) 1999-2009 Intel Corporation. [ 16.865743] bus: 'pci': add driver ixgbe [ 16.883031] initcall ixgbe_init_module+0x0/0x7f returned 0 after 29296 usecs [ 16.890011] calling ixgb_init_module+0x0/0x71 @ 1 [ 16.894796] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 16.900002] Copyright (c) 1999-2008 Intel Corporation. [ 16.905138] bus: 'pci': add driver ixgb [ 16.921260] initcall ixgb_init_module+0x0/0x71 returned 0 after 29296 usecs [ 16.928214] calling t1_init_module+0x0/0x42 @ 1 [ 16.930009] bus: 'pci': add driver cxgb [ 16.944492] initcall t1_init_module+0x0/0x42 returned 0 after 9765 usecs [ 16.950006] calling cxgb3_init_module+0x0/0x47 @ 1 [ 16.954886] bus: 'pci': add driver cxgb3 [ 16.970473] initcall cxgb3_init_module+0x0/0x47 returned 0 after 19531 usecs [ 16.977510] calling vcan_init_module+0x0/0x5c @ 1 [ 16.980008] vcan: Virtual CAN interface driver [ 16.984454] initcall vcan_init_module+0x0/0x5c returned 0 after 0 usecs [ 16.990004] calling can_dev_init+0x0/0x55 @ 1 [ 16.994443] CAN device driver interface [ 17.000004] initcall can_dev_init+0x0/0x55 returned 0 after 9765 usecs [ 17.006522] calling atl1_init_module+0x0/0x42 @ 1 [ 17.010027] bus: 'pci': add driver atl1 [ 17.024333] initcall atl1_init_module+0x0/0x42 returned 0 after 9765 usecs [ 17.030013] calling atl2_init_module+0x0/0x71 @ 1 [ 17.034798] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 17.040009] Copyright (c) 2007 Atheros Corporation. [ 17.044884] bus: 'pci': add driver atl2 [ 17.061098] initcall atl2_init_module+0x0/0x71 returned 0 after 29296 usecs [ 17.068049] calling atl1e_init_module+0x0/0x42 @ 1 [ 17.070005] bus: 'pci': add driver ATL1E [ 17.084518] initcall atl1e_init_module+0x0/0x42 returned 0 after 9765 usecs [ 17.090008] calling bdx_module_init+0x0/0xb0 @ 1 [ 17.094709] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 17.100002] tehuti: Options: hw_csum [ 17.103663] bus: 'pci': add driver tehuti [ 17.118811] initcall bdx_module_init+0x0/0xb0 returned 0 after 19531 usecs [ 17.120004] calling enic_init_module+0x0/0x5c @ 1 [ 17.130005] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933 [ 17.135484] bus: 'pci': add driver enic [ 17.149900] initcall enic_init_module+0x0/0x5c returned 0 after 9765 usecs [ 17.150027] calling plip_init+0x0/0x84 @ 1 [ 17.160024] plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient! [ 17.168031] device: 'plip0': device_add [ 17.182739] NET3 PLIP version 2.4-parport [email protected] [ 17.188218] plip0: Parallel port at 0x378, not using IRQ. [ 17.190006] initcall plip_init+0x0/0x84 returned 0 after 29296 usecs [ 17.196348] calling happy_meal_probe+0x0/0x42 @ 1 [ 17.200006] bus: 'pci': add driver hme [ 17.214277] initcall happy_meal_probe+0x0/0x42 returned 0 after 9765 usecs [ 17.220008] calling gem_init+0x0/0x42 @ 1 [ 17.224104] bus: 'pci': add driver gem [ 17.238427] initcall gem_init+0x0/0x42 returned 0 after 9765 usecs [ 17.240009] calling cas_init+0x0/0x61 @ 1 [ 17.244106] bus: 'pci': add driver cassini [ 17.261348] initcall cas_init+0x0/0x61 returned 0 after 19531 usecs [ 17.267604] calling vortex_init+0x0/0xd8 @ 1 [ 17.270010] bus: 'pci': add driver 3c59x [ 17.284526] initcall vortex_init+0x0/0xd8 returned 0 after 9765 usecs [ 17.290026] calling typhoon_init+0x0/0x42 @ 1 [ 17.294470] bus: 'pci': add driver typhoon [ 17.309213] initcall typhoon_init+0x0/0x42 returned 0 after 9765 usecs [ 17.310004] calling ne2k_pci_init+0x0/0x42 @ 1 [ 17.320005] bus: 'pci': add driver ne2k-pci [ 17.334753] initcall ne2k_pci_init+0x0/0x42 returned 0 after 9765 usecs [ 17.340004] calling pcnet32_init_module+0x0/0x154 @ 1 [ 17.345135] pcnet32.c:v1.35 21.Apr.2008 [email protected] [ 17.350008] bus: 'pci': add driver pcnet32 [ 17.364651] initcall pcnet32_init_module+0x0/0x154 returned 0 after 19531 usecs [ 17.370004] calling e100_init_module+0x0/0x81 @ 1 [ 17.374787] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 17.380006] e100: Copyright(c) 1999-2006 Intel Corporation [ 17.385485] bus: 'pci': add driver e100 [ 17.401336] initcall e100_init_module+0x0/0x81 returned 0 after 29296 usecs [ 17.408290] calling tlan_probe+0x0/0x108 @ 1 [ 17.410006] ThunderLAN driver v1.15a [ 17.413577] bus: 'pci': add driver tlan [ 17.430938] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 17.436101] bus: 'pci': remove driver tlan [ 17.451223] driver: 'tlan': driver_release [ 17.455321] initcall tlan_probe+0x0/0x108 returned -19 after 39062 usecs [ 17.460004] calling smsc9420_init_module+0x0/0x64 @ 1 [ 17.465137] bus: 'pci': add driver smsc9420 [ 17.481487] initcall smsc9420_init_module+0x0/0x64 returned 0 after 19531 usecs [ 17.488791] calling sis190_init_module+0x0/0x42 @ 1 [ 17.490011] bus: 'pci': add driver sis190 [ 17.504715] initcall sis190_init_module+0x0/0x42 returned 0 after 9765 usecs [ 17.510008] calling r6040_init+0x0/0x42 @ 1 [ 17.514278] bus: 'pci': add driver r6040 [ 17.530686] initcall r6040_init+0x0/0x42 returned 0 after 19531 usecs [ 17.537117] calling yellowfin_init+0x0/0x42 @ 1 [ 17.540006] bus: 'pci': add driver yellowfin [ 17.555044] initcall yellowfin_init+0x0/0x42 returned 0 after 9765 usecs [ 17.560026] calling acenic_init+0x0/0x42 @ 1 [ 17.564384] bus: 'pci': add driver acenic [ 17.581320] initcall acenic_init+0x0/0x42 returned 0 after 19531 usecs [ 17.587843] calling ns83820_init+0x0/0x4e @ 1 [ 17.590003] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 17.596782] bus: 'pci': add driver ns83820 [ 17.612402] initcall ns83820_init+0x0/0x4e returned 0 after 19531 usecs [ 17.619007] calling fealnx_init+0x0/0x42 @ 1 [ 17.620010] bus: 'pci': add driver fealnx [ 17.634614] initcall fealnx_init+0x0/0x42 returned 0 after 9765 usecs [ 17.640009] calling tg3_init+0x0/0x42 @ 1 [ 17.644106] bus: 'pci': add driver tg3 [ 17.658455] initcall tg3_init+0x0/0x42 returned 0 after 9765 usecs [ 17.660005] calling bnx2x_init+0x0/0xa8 @ 1 [ 17.664387] bus: 'pci': add driver bnx2x [ 17.670272] initcall bnx2x_init+0x0/0xa8 returned 0 after 9765 usecs [ 17.676616] calling skge_init_module+0x0/0x42 @ 1 [ 17.680029] bus: 'pci': add driver skge [ 17.694662] initcall skge_init_module+0x0/0x42 returned 0 after 9765 usecs [ 17.700022] calling sky2_init_module+0x0/0x4e @ 1 [ 17.704805] sky2 driver version 1.23 [ 17.708383] bus: 'pci': add driver sky2 [ 17.720697] initcall sky2_init_module+0x0/0x4e returned 0 after 19531 usecs [ 17.727652] calling ks8851_init+0x0/0x39 @ 1 [ 17.730010] bus: 'spi': add driver ks8851 [ 17.744456] initcall ks8851_init+0x0/0x39 returned 0 after 9765 usecs [ 17.750026] calling rhine_init+0x0/0x5e @ 1 [ 17.754296] bus: 'pci': add driver via-rhine [ 17.769167] initcall rhine_init+0x0/0x5e returned 0 after 9765 usecs [ 17.770005] calling velocity_init_module+0x0/0x42 @ 1 [ 17.780005] bus: 'pci': add driver via-velocity [ 17.795092] initcall velocity_init_module+0x0/0x42 returned 0 after 9765 usecs [ 17.800004] calling starfire_init+0x0/0x42 @ 1 [ 17.804531] bus: 'pci': add driver starfire [ 17.820968] initcall starfire_init+0x0/0x42 returned 0 after 19531 usecs [ 17.827663] calling marvell_init+0x0/0x84 @ 1 [ 17.830029] bus: 'mdio_bus': add driver Marvell 88E1101 [ 17.845786] bus: 'mdio_bus': add driver Marvell 88E1112 [ 17.861869] bus: 'mdio_bus': add driver Marvell 88E1111 [ 17.867310] bus: 'mdio_bus': add driver Marvell 88E1118 [ 17.881776] bus: 'mdio_bus': add driver Marvell 88E1121R [ 17.887311] bus: 'mdio_bus': add driver Marvell 88E1145 [ 17.900786] bus: 'mdio_bus': add driver Marvell 88E1240 [ 17.906235] initcall marvell_init+0x0/0x84 returned 0 after 68359 usecs [ 17.910024] calling davicom_init+0x0/0x83 @ 1 [ 17.914466] bus: 'mdio_bus': add driver Davicom DM9161E [ 17.930745] bus: 'mdio_bus': add driver Davicom DM9161A [ 17.936187] bus: 'mdio_bus': add driver Davicom DM9131 [ 17.951200] initcall davicom_init+0x0/0x83 returned 0 after 39062 usecs [ 17.957808] calling cicada_init+0x0/0x65 @ 1 [ 17.960025] bus: 'mdio_bus': add driver Cicada Cis8204 [ 17.975550] bus: 'mdio_bus': add driver Cicada Cis8201 [ 17.990396] initcall cicada_init+0x0/0x65 returned 0 after 29296 usecs [ 17.996914] calling qs6612_init+0x0/0x39 @ 1 [ 18.000004] bus: 'mdio_bus': add driver QS6612 [ 18.014841] initcall qs6612_init+0x0/0x39 returned 0 after 9765 usecs [ 18.020005] calling smsc_init+0x0/0xbf @ 1 [ 18.024183] bus: 'mdio_bus': add driver SMSC LAN83C185 [ 18.041405] bus: 'mdio_bus': add driver SMSC LAN8187 [ 18.046626] bus: 'mdio_bus': add driver SMSC LAN8700 [ 18.060595] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY [ 18.066896] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720 [ 18.081363] initcall smsc_init+0x0/0xbf returned 0 after 58593 usecs [ 18.087711] calling vsc82xx_init+0x0/0x65 @ 1 [ 18.090021] bus: 'mdio_bus': add driver Vitesse VSC8244 [ 18.105657] bus: 'mdio_bus': add driver Vitesse VSC8221 [ 18.120475] initcall vsc82xx_init+0x0/0x65 returned 0 after 29296 usecs [ 18.127085] calling broadcom_init+0x0/0x125 @ 1 [ 18.130010] bus: 'mdio_bus': add driver Broadcom BCM5411 [ 18.145697] bus: 'mdio_bus': add driver Broadcom BCM5421 [ 18.160543] bus: 'mdio_bus': add driver Broadcom BCM5461 [ 18.166075] bus: 'mdio_bus': add driver Broadcom BCM5464 [ 18.181715] bus: 'mdio_bus': add driver Broadcom BCM5481 [ 18.187258] bus: 'mdio_bus': add driver Broadcom BCM5482 [ 18.201082] bus: 'mdio_bus': add driver Broadcom BCM50610 [ 18.206698] bus: 'mdio_bus': add driver Broadcom BCM57780 [ 18.221151] initcall broadcom_init+0x0/0x125 returned 0 after 87890 usecs [ 18.227927] calling ip175c_init+0x0/0x39 @ 1 [ 18.230023] bus: 'mdio_bus': add driver ICPlus IP175C [ 18.245650] initcall ip175c_init+0x0/0x39 returned 0 after 9765 usecs [ 18.250026] calling et1011c_init+0x0/0x39 @ 1 [ 18.254468] bus: 'mdio_bus': add driver ET1011C [ 18.271408] initcall et1011c_init+0x0/0x39 returned 0 after 19531 usecs [ 18.278019] calling fixed_mdio_bus_init+0x0/0xf6 @ 1 [ 18.280009] Registering platform device 'Fixed MDIO bus.0'. Parent at platform [ 18.290005] device: 'Fixed MDIO bus.0': device_add [ 18.294798] bus: 'platform': add device Fixed MDIO bus.0 [ 18.311411] device: '0': device_add [ 18.315178] Fixed MDIO Bus: probed [ 18.318580] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 29296 usecs [ 18.320032] calling ns_init+0x0/0x39 @ 1 [ 18.324043] bus: 'mdio_bus': add driver NatSemi DP83865 [ 18.341561] initcall ns_init+0x0/0x39 returned 0 after 19531 usecs [ 18.347733] calling ste10Xp_init+0x0/0x49 @ 1 [ 18.350023] bus: 'mdio_bus': add driver STe100p [ 18.364935] bus: 'mdio_bus': add driver STe101p [ 18.369677] initcall ste10Xp_init+0x0/0x49 returned 0 after 9765 usecs [ 18.370027] calling sundance_init+0x0/0x42 @ 1 [ 18.380011] bus: 'pci': add driver sundance [ 18.394811] initcall sundance_init+0x0/0x42 returned 0 after 9765 usecs [ 18.400022] calling hamachi_init+0x0/0x42 @ 1 [ 18.404462] bus: 'pci': add driver hamachi [ 18.410236] initcall hamachi_init+0x0/0x42 returned 0 after 9765 usecs [ 18.416754] calling net_olddevs_init+0x0/0xc7 @ 1 [ 18.420040] D-Link DE-620 pocket adapter io 0x378, which is busy. [ 18.426159] initcall net_olddevs_init+0x0/0xc7 returned 0 after 0 usecs [ 18.430011] calling hp100_module_init+0x0/0x42 @ 1 [ 18.434888] bus: 'pci': add driver hp100 [ 18.450854] initcall hp100_module_init+0x0/0x42 returned 0 after 19531 usecs [ 18.457894] calling b44_init+0x0/0x89 @ 1 [ 18.460030] bus: 'pci': add driver b44 [ 18.474362] bus: 'ssb': add driver b44 [ 18.478337] initcall b44_init+0x0/0x89 returned 0 after 9765 usecs [ 18.480027] calling init_nic+0x0/0x42 @ 1 [ 18.484123] bus: 'pci': add driver forcedeth [ 18.490024] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth [ 18.500003] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0 [ 18.508124] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 18.510134] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 18.520009] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 18.530008] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 18.535986] nv_probe: set workaround bit for reversed mac addr [ 19.070247] device: 'eth0': device_add [ 19.075056] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 [ 19.080031] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 19.086409] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth' [ 19.090071] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth [ 19.110984] initcall init_nic+0x0/0x42 returned 0 after 615234 usecs [ 19.117330] calling ql3xxx_init_module+0x0/0x42 @ 1 [ 19.120037] bus: 'pci': add driver qla3xxx [ 19.134597] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 9765 usecs [ 19.140022] calling qlge_init_module+0x0/0x42 @ 1 [ 19.144809] bus: 'pci': add driver qlge [ 19.162653] initcall qlge_init_module+0x0/0x42 returned 0 after 19531 usecs [ 19.169606] calling ppp_init+0x0/0x104 @ 1 [ 19.170002] PPP generic driver version 2.4.2 [ 19.174346] device class 'ppp': registering [ 19.190604] device: 'ppp': device_add [ 19.194545] initcall ppp_init+0x0/0x104 returned 0 after 19531 usecs [ 19.200028] calling ppp_sync_init+0x0/0x5c @ 1 [ 19.204555] initcall ppp_sync_init+0x0/0x5c returned 0 after 0 usecs [ 19.210008] calling deflate_init+0x0/0x61 @ 1 [ 19.214463] PPP Deflate Compression module registered [ 19.220006] initcall deflate_init+0x0/0x61 returned 0 after 9765 usecs [ 19.226521] calling bsdcomp_init+0x0/0x55 @ 1 [ 19.230006] PPP BSD Compression module registered [ 19.234704] initcall bsdcomp_init+0x0/0x55 returned 0 after 0 usecs [ 19.240020] calling ppp_mppe_init+0x0/0x10d @ 1 [ 19.255352] PPP MPPE Compression module registered [ 19.260025] initcall ppp_mppe_init+0x0/0x10d returned 0 after 19531 usecs [ 19.266808] calling pppox_init+0x0/0x39 @ 1 [ 19.270003] NET: Registered protocol family 24 [ 19.274443] initcall pppox_init+0x0/0x39 returned 0 after 0 usecs [ 19.280004] calling pppoe_init+0x0/0xaf @ 1 [ 19.284295] initcall pppoe_init+0x0/0xaf returned 0 after 0 usecs [ 19.290004] calling pppol2tp_init+0x0/0xa8 @ 1 [ 19.294540] PPPoL2TP kernel driver, V1.0 [ 19.300020] initcall pppol2tp_init+0x0/0xa8 returned 0 after 9765 usecs [ 19.306624] calling slip_init+0x0/0xe6 @ 1 [ 19.310003] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 19.320002] CSLIP: code copyright 1989 Regents of the University of California. [ 19.327299] SLIP linefill/keepalive option. [ 19.330057] initcall slip_init+0x0/0xe6 returned 0 after 19531 usecs [ 19.336401] calling macvlan_init_module+0x0/0x79 @ 1 [ 19.340022] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs [ 19.350004] calling de600_init+0x0/0x2f2 @ 1 [ 19.354370] DE600: port 0x378 busy [ 19.357776] initcall de600_init+0x0/0x2f2 returned -16 after 0 usecs [ 19.360004] initcall de600_init+0x0/0x2f2 returned with error code -16 [ 19.370008] calling cp_init+0x0/0x42 @ 1 [ 19.374025] bus: 'pci': add driver 8139cp [ 19.378069] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139cp [ 19.380018] bus: 'pci': really_probe: probing driver 8139cp with device 0000:05:07.0 [ 19.390120] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 19.400026] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 19.410302] initcall cp_init+0x0/0x42 returned 0 after 39062 usecs [ 19.416479] calling rtl8139_init_module+0x0/0x42 @ 1 [ 19.420028] bus: 'pci': add driver 8139too [ 19.424147] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too [ 19.430006] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0 [ 19.440102] 8139too Fast Ethernet driver 0.9.28 [ 19.444662] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 19.450412] device: 'eth1': device_add [ 19.460574] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11 [ 19.467124] driver: '0000:05:07.0': driver_bound: bound to device '8139too' [ 19.470071] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too [ 19.491790] initcall rtl8139_init_module+0x0/0x42 returned 0 after 68359 usecs [ 19.499002] calling atp_init_module+0x0/0xbf @ 1 [ 19.500030] atp.c:v1.09=ac 2002/10/01 Donald Becker <[email protected]> [ 19.510035] initcall atp_init_module+0x0/0xbf returned -19 after 9765 usecs [ 19.516988] calling sc92031_init+0x0/0x42 @ 1 [ 19.520009] bus: 'pci': add driver sc92031 [ 19.534723] initcall sc92031_init+0x0/0x42 returned 0 after 9765 usecs [ 19.540022] calling eql_init_module+0x0/0x89 @ 1 [ 19.544718] Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected]) [ 19.550021] device: 'eql': device_add [ 19.564971] initcall eql_init_module+0x0/0x89 returned 0 after 19531 usecs [ 19.570004] calling tun_init+0x0/0xb7 @ 1 [ 19.574094] tun: Universal TUN/TAP device driver, 1.6 [ 19.580003] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 19.586182] device: 'tun': device_add [ 19.601596] initcall tun_init+0x0/0xb7 returned 0 after 29296 usecs [ 19.607855] calling veth_init+0x0/0x39 @ 1 [ 19.610008] initcall veth_init+0x0/0x39 returned 0 after 0 usecs [ 19.616011] calling rio_init+0x0/0x42 @ 1 [ 19.620007] bus: 'pci': add driver dl2k [ 19.634361] initcall rio_init+0x0/0x42 returned 0 after 9765 usecs [ 19.640005] calling rtl8169_init_module+0x0/0x42 @ 1 [ 19.645051] bus: 'pci': add driver r8169 [ 19.659473] initcall rtl8169_init_module+0x0/0x42 returned 0 after 9765 usecs [ 19.660004] calling amd8111e_init+0x0/0x42 @ 1 [ 19.670006] bus: 'pci': add driver amd8111e [ 19.684813] initcall amd8111e_init+0x0/0x42 returned 0 after 9765 usecs [ 19.690004] calling myri10ge_init_module+0x0/0x99 @ 1 [ 19.695135] myri10ge: Version 1.5.0-1.418 [ 19.700006] bus: 'pci': add driver myri10ge [ 19.714774] initcall myri10ge_init_module+0x0/0x99 returned 0 after 19531 usecs [ 19.720010] calling mlx4_init+0x0/0xcb @ 1 [ 19.725249] bus: 'pci': add driver mlx4_core [ 19.742084] initcall mlx4_init+0x0/0xcb returned 0 after 19531 usecs [ 19.748434] calling mlx4_en_init+0x0/0x39 @ 1 [ 19.750045] initcall mlx4_en_init+0x0/0x39 returned 0 after 0 usecs [ 19.756304] calling enc28j60_init+0x0/0x4a @ 1 [ 19.760005] bus: 'spi': add driver enc28j60 [ 19.774953] initcall enc28j60_init+0x0/0x4a returned 0 after 9765 usecs [ 19.780004] calling ethoc_init+0x0/0x39 @ 1 [ 19.784270] bus: 'platform': add driver ethoc [ 19.800902] initcall ethoc_init+0x0/0x39 returned 0 after 19531 usecs [ 19.807333] calling dnet_init+0x0/0x39 @ 1 [ 19.810004] bus: 'platform': add driver dnet [ 19.824913] initcall dnet_init+0x0/0x39 returned 0 after 9765 usecs [ 19.830010] calling hdlc_module_init+0x0/0x66 @ 1 [ 19.834795] HDLC support module revision 1.22 [ 19.840009] initcall hdlc_module_init+0x0/0x66 returned 0 after 9765 usecs [ 19.846874] calling mod_init+0x0/0x3b @ 1 [ 19.850005] initcall mod_init+0x0/0x3b returned 0 after 0 usecs [ 19.855916] calling mod_init+0x0/0x3b @ 1 [ 19.860005] initcall mod_init+0x0/0x3b returned 0 after 0 usecs [ 19.865914] calling mod_init+0x0/0x3b @ 1 [ 19.870027] initcall mod_init+0x0/0x3b returned 0 after 0 usecs [ 19.875941] calling fst_init+0x0/0x76 @ 1 [ 19.880008] bus: 'pci': add driver fst [ 19.894429] initcall fst_init+0x0/0x76 returned 0 after 9765 usecs [ 19.900005] calling pci200_init_module+0x0/0x69 @ 1 [ 19.904970] bus: 'pci': add driver PCI200SYN [ 19.921761] initcall pci200_init_module+0x0/0x69 returned 0 after 19531 usecs [ 19.928890] calling pc300_init_module+0x0/0x8c @ 1 [ 19.930014] bus: 'pci': add driver PC300 [ 19.944445] initcall pc300_init_module+0x0/0x8c returned 0 after 9765 usecs [ 19.950008] calling arcnet_init+0x0/0x84 @ 1 [ 19.954364] arcnet loaded. [ 19.957074] initcall arcnet_init+0x0/0x84 returned 0 after 0 usecs [ 19.960003] calling arcnet_rfc1201_init+0x0/0x98 @ 1 [ 19.965047] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 19.970003] initcall arcnet_rfc1201_init+0x0/0x98 returned 0 after 9765 usecs [ 19.980003] calling arcnet_raw_init+0x0/0x80 @ 1 [ 19.984700] arcnet: raw mode (`r') encapsulation support loaded. [ 19.990026] initcall arcnet_raw_init+0x0/0x80 returned 0 after 9765 usecs [ 20.000003] calling com90io_init+0x0/0x4d4 @ 1 [ 20.004567] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 20.010002] E-mail me if you actually test this driver, please! [ 20.015913] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 20.020023] initcall com90io_init+0x0/0x4d4 returned -19 after 19531 usecs [ 20.030021] calling arc_rimi_init+0x0/0x4f2 @ 1 [ 20.034666] arcnet: RIM I (entirely mem-mapped) support [ 20.040011] E-mail me if you actually test the RIM I driver, please! [ 20.050003] arc%d: Given: node 00h, shmem 0h, irq 0 [ 20.054962] arc%d: No autoprobe for RIM I; you must specify the shmem and irq! [ 20.060022] initcall arc_rimi_init+0x0/0x4f2 returned -5 after 29296 usecs [ 20.066885] initcall arc_rimi_init+0x0/0x4f2 returned with error code -5 [ 20.070019] calling com20020pci_init+0x0/0x57 @ 1 [ 20.080002] arcnet: COM20020 PCI support [ 20.083925] bus: 'pci': add driver com20020 [ 20.098694] initcall com20020pci_init+0x0/0x57 returned 0 after 9765 usecs [ 20.100009] calling catc_init+0x0/0x5e @ 1 [ 20.104192] bus: 'usb': add driver catc [ 20.121196] usbcore: registered new interface driver catc [ 20.126594] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 20.130006] initcall catc_init+0x0/0x5e returned 0 after 29296 usecs [ 20.136356] calling kaweth_init+0x0/0x42 @ 1 [ 20.140003] bus: 'usb': add driver kaweth [ 20.154771] usbcore: registered new interface driver kaweth [ 20.160008] initcall kaweth_init+0x0/0x42 returned 0 after 19531 usecs [ 20.166530] calling pegasus_init+0x0/0x18d @ 1 [ 20.170003] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 20.177474] bus: 'usb': add driver pegasus [ 20.191608] usbcore: registered new interface driver pegasus [ 20.197272] initcall pegasus_init+0x0/0x18d returned 0 after 19531 usecs [ 20.200004] calling usb_rtl8150_init+0x0/0x4e @ 1 [ 20.204787] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 20.210003] bus: 'usb': add driver rtl8150 [ 20.224668] usbcore: registered new interface driver rtl8150 [ 20.230010] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 29296 usecs [ 20.236961] calling hso_init+0x0/0x1ce @ 1 [ 20.240003] hso: drivers/net/usb/hso.c: 1.2 Option Wireless [ 20.245595] bus: 'usb': add driver hso [ 20.261984] usbcore: registered new interface driver hso [ 20.267296] initcall hso_init+0x0/0x1ce returned 0 after 19531 usecs [ 20.270004] calling asix_init+0x0/0x42 @ 1 [ 20.274182] bus: 'usb': add driver asix [ 20.290989] usbcore: registered new interface driver asix [ 20.296391] initcall asix_init+0x0/0x42 returned 0 after 19531 usecs [ 20.300003] calling cdc_init+0x0/0x42 @ 1 [ 20.304097] bus: 'usb': add driver cdc_ether [ 20.322061] usbcore: registered new interface driver cdc_ether [ 20.327893] initcall cdc_init+0x0/0x42 returned 0 after 19531 usecs [ 20.330006] calling eem_init+0x0/0x42 @ 1 [ 20.334097] bus: 'usb': add driver cdc_eem [ 20.352334] usbcore: registered new interface driver cdc_eem [ 20.357999] initcall eem_init+0x0/0x42 returned 0 after 19531 usecs [ 20.360004] calling dm9601_init+0x0/0x42 @ 1 [ 20.364354] bus: 'usb': add driver dm9601 [ 20.381143] usbcore: registered new interface driver dm9601 [ 20.386713] initcall dm9601_init+0x0/0x42 returned 0 after 19531 usecs [ 20.390004] calling smsc95xx_init+0x0/0x42 @ 1 [ 20.394529] bus: 'usb': add driver smsc95xx [ 20.410891] usbcore: registered new interface driver smsc95xx [ 20.416637] initcall smsc95xx_init+0x0/0x42 returned 0 after 19531 usecs [ 20.420004] calling usbnet_init+0x0/0x42 @ 1 [ 20.424354] bus: 'usb': add driver gl620a [ 20.441793] usbcore: registered new interface driver gl620a [ 20.447361] initcall usbnet_init+0x0/0x42 returned 0 after 19531 usecs [ 20.450004] calling net1080_init+0x0/0x42 @ 1 [ 20.454441] bus: 'usb': add driver net1080 [ 20.471106] usbcore: registered new interface driver net1080 [ 20.476767] initcall net1080_init+0x0/0x42 returned 0 after 19531 usecs [ 20.480004] calling plusb_init+0x0/0x42 @ 1 [ 20.484268] bus: 'usb': add driver plusb [ 20.501569] usbcore: registered new interface driver plusb [ 20.507056] initcall plusb_init+0x0/0x42 returned 0 after 19531 usecs [ 20.510004] calling rndis_init+0x0/0x42 @ 1 [ 20.514269] bus: 'usb': add driver rndis_host [ 20.530631] usbcore: registered new interface driver rndis_host [ 20.536549] initcall rndis_init+0x0/0x42 returned 0 after 19531 usecs [ 20.540004] calling cdc_subset_init+0x0/0x42 @ 1 [ 20.544701] bus: 'usb': add driver cdc_subset [ 20.560807] usbcore: registered new interface driver cdc_subset [ 20.566726] initcall cdc_subset_init+0x0/0x42 returned 0 after 19531 usecs [ 20.570004] calling zaurus_init+0x0/0x42 @ 1 [ 20.574354] bus: 'usb': add driver zaurus [ 20.591559] usbcore: registered new interface driver zaurus [ 20.597128] initcall zaurus_init+0x0/0x42 returned 0 after 19531 usecs [ 20.600004] calling mcs7830_init+0x0/0x42 @ 1 [ 20.604443] bus: 'usb': add driver MOSCHIP usb-ethernet driver [ 20.622315] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 20.629704] initcall mcs7830_init+0x0/0x42 returned 0 after 19531 usecs [ 20.630006] calling usbnet_init+0x0/0x52 @ 1 [ 20.640009] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs [ 20.646182] calling int51x1_init+0x0/0x42 @ 1 [ 20.650003] bus: 'usb': add driver int51x1 [ 20.664849] usbcore: registered new interface driver int51x1 [ 20.670011] initcall int51x1_init+0x0/0x42 returned 0 after 19531 usecs [ 20.676616] calling usbpn_init+0x0/0x42 @ 1 [ 20.680004] bus: 'usb': add driver cdc_phonet [ 20.695108] usbcore: registered new interface driver cdc_phonet [ 20.700008] initcall usbpn_init+0x0/0x42 returned 0 after 19531 usecs [ 20.706443] calling ipw2100_init+0x0/0x93 @ 1 [ 20.710003] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 20.716778] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 20.720009] bus: 'pci': add driver ipw2100 [ 20.724349] initcall ipw2100_init+0x0/0x93 returned 0 after 9765 usecs [ 20.730028] calling ipw_init+0x0/0xad @ 1 [ 20.734120] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdq [ 20.740002] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 20.750006] bus: 'pci': add driver ipw2200 [ 20.754387] initcall ipw_init+0x0/0xad returned 0 after 19531 usecs [ 20.760005] calling ieee80211_init+0x0/0x49 @ 1 [ 20.764615] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 20.770002] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 20.780004] initcall ieee80211_init+0x0/0x49 returned 0 after 19531 usecs [ 20.786782] calling strip_init_driver+0x0/0x8e @ 1 [ 20.790002] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) [ 20.800042] initcall strip_init_driver+0x0/0x8e returned 0 after 9765 usecs [ 20.806996] calling init_orinoco+0x0/0x42 @ 1 [ 20.810003] orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al) [ 20.820003] initcall init_orinoco+0x0/0x42 returned 0 after 9765 usecs [ 20.826521] calling orinoco_pci_init+0x0/0x55 @ 1 [ 20.830005] orinoco_pci 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]> & Jean Tourrilhes <[email protected]>) [ 20.840021] bus: 'pci': add driver orinoco_pci [ 20.850237] initcall orinoco_pci_init+0x0/0x55 returned 0 after 19531 usecs [ 20.857188] calling airo_init_module+0x0/0x110 @ 1 [ 20.860018] airo(): Probing for PCI adapters [ 20.864288] bus: 'pci': add driver airo [ 20.870251] airo(): Finished probing for PCI adapters [ 20.875301] initcall airo_init_module+0x0/0x110 returned 0 after 9765 usecs [ 20.880005] calling prism54_module_init+0x0/0x5c @ 1 [ 20.885047] Loaded prism54 driver, version 1.2 [ 20.890006] bus: 'pci': add driver prism54 [ 20.894333] initcall prism54_module_init+0x0/0x5c returned 0 after 9765 usecs [ 20.900005] calling rtl8180_init+0x0/0x42 @ 1 [ 20.904442] bus: 'pci': add driver rtl8180 [ 20.910238] initcall rtl8180_init+0x0/0x42 returned 0 after 9765 usecs [ 20.916755] calling rtl8187_init+0x0/0x42 @ 1 [ 20.920006] bus: 'usb': add driver rtl8187 [ 20.924321] usbcore: registered new interface driver rtl8187 [ 20.930014] initcall rtl8187_init+0x0/0x42 returned 0 after 9765 usecs [ 20.936537] calling rndis_wlan_init+0x0/0x42 @ 1 [ 20.940004] bus: 'usb': add driver rndis_wlan [ 20.944565] usbcore: registered new interface driver rndis_wlan [ 20.950009] initcall rndis_wlan_init+0x0/0x42 returned 0 after 9765 usecs [ 20.960004] calling zd1201_init+0x0/0x42 @ 1 [ 20.964354] bus: 'usb': add driver zd1201 [ 20.970265] usbcore: registered new interface driver zd1201 [ 20.975832] initcall zd1201_init+0x0/0x42 returned 0 after 9765 usecs [ 20.980005] calling lbs_init_module+0x0/0x5d @ 1 [ 20.984728] initcall lbs_init_module+0x0/0x5d returned 0 after 0 usecs [ 20.990004] calling if_spi_init_module+0x0/0x45 @ 1 [ 20.994960] libertas_spi: Libertas SPI driver [ 21.000004] bus: 'spi': add driver libertas_spi [ 21.004735] initcall if_spi_init_module+0x0/0x45 returned 0 after 9765 usecs [ 21.010005] calling lbtf_init_module+0x0/0x6c @ 1 [ 21.014985] initcall lbtf_init_module+0x0/0x6c returned 0 after 0 usecs [ 21.020004] calling if_usb_init_module+0x0/0x42 @ 1 [ 21.030006] bus: 'usb': add driver lbtf_usb [ 21.034401] usbcore: registered new interface driver lbtf_usb [ 21.040015] initcall if_usb_init_module+0x0/0x42 returned 0 after 9765 usecs [ 21.047056] calling adm8211_init+0x0/0x42 @ 1 [ 21.050008] bus: 'pci': add driver adm8211 [ 21.054346] initcall adm8211_init+0x0/0x42 returned 0 after 0 usecs [ 21.060005] calling iwl3945_init+0x0/0x9a @ 1 [ 21.064441] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kd [ 21.070002] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 21.080008] bus: 'pci': add driver iwl3945 [ 21.084341] initcall iwl3945_init+0x0/0x9a returned 0 after 19531 usecs [ 21.090005] calling p54p_init+0x0/0x42 @ 1 [ 21.094185] bus: 'pci': add driver p54pci [ 21.100251] initcall p54p_init+0x0/0x42 returned 0 after 9765 usecs [ 21.106511] calling p54spi_init+0x0/0x57 @ 1 [ 21.110005] bus: 'spi': add driver cx3110x [ 21.114324] initcall p54spi_init+0x0/0x57 returned 0 after 0 usecs [ 21.120004] calling ar9170_init+0x0/0x42 @ 1 [ 21.124356] bus: 'usb': add driver ar9170usb [ 21.130218] usbcore: registered new interface driver ar9170usb [ 21.136047] initcall ar9170_init+0x0/0x42 returned 0 after 9765 usecs [ 21.140005] calling init_mac80211_hwsim+0x0/0x535 @ 1 [ 21.145134] device class 'mac80211_hwsim': registering [ 21.150219] mac80211_hwsim: Initializing radio 0 [ 21.154897] device: 'hwsim0': device_add [ 21.160325] device: 'phy0': device_add [ 21.164316] device: 'rfkill0': device_add [ 21.170892] device: 'wmaster0': device_add [ 21.176092] phy0: Selected rate control algorithm 'pid' [ 21.180181] device: 'wlan0': device_add [ 21.185107] phy0: hwaddr 02:00:00:00:00:00 registered [ 21.190034] mac80211_hwsim: Initializing radio 1 [ 21.194744] device: 'hwsim1': device_add [ 21.200224] device: 'phy1': device_add [ 21.204227] device: 'rfkill1': device_add [ 21.210790] device: 'wmaster1': device_add [ 21.216080] phy1: Selected rate control algorithm 'pid' [ 21.220183] device: 'wlan1': device_add [ 21.225221] phy1: hwaddr 02:00:00:00:01:00 registered [ 21.230063] device: 'hwsim0': device_add [ 21.235088] initcall init_mac80211_hwsim+0x0/0x535 returned 0 after 87890 usecs [ 21.240005] calling wl12xx_init+0x0/0x57 @ 1 [ 21.244364] bus: 'spi': add driver wl12xx [ 21.250221] initcall wl12xx_init+0x0/0x57 returned 0 after 9765 usecs [ 21.256651] calling iwm_sdio_init_module+0x0/0x39 @ 1 [ 21.260005] bus: 'sdio': add driver iwm_sdio [ 21.264505] initcall iwm_sdio_init_module+0x0/0x39 returned 0 after 0 usecs [ 21.270004] calling dmfe_init_module+0x0/0x10f @ 1 [ 21.280002] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 21.286707] bus: 'pci': add driver dmfe [ 21.290272] initcall dmfe_init_module+0x0/0x10f returned 0 after 9765 usecs [ 21.297223] calling de_init+0x0/0x42 @ 1 [ 21.300029] bus: 'pci': add driver de2104x [ 21.304382] initcall de_init+0x0/0x42 returned 0 after 0 usecs [ 21.310004] calling tulip_init+0x0/0x5a @ 1 [ 21.314269] bus: 'pci': add driver tulip [ 21.320282] initcall tulip_init+0x0/0x5a returned 0 after 9765 usecs [ 21.326625] calling de4x5_module_init+0x0/0x42 @ 1 [ 21.330010] bus: 'pci': add driver de4x5 [ 21.334176] initcall de4x5_module_init+0x0/0x42 returned 0 after 0 usecs [ 21.340004] calling uli526x_init_module+0x0/0xc3 @ 1 [ 21.345046] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 21.350006] bus: 'pci': add driver uli526x [ 21.354383] initcall uli526x_init_module+0x0/0xc3 returned 0 after 9765 usecs [ 21.360005] calling mkiss_init_driver+0x0/0x68 @ 1 [ 21.370002] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 21.375049] initcall mkiss_init_driver+0x0/0x68 returned 0 after 0 usecs [ 21.380003] calling sixpack_init_driver+0x0/0x68 @ 1 [ 21.385047] AX.25: 6pack driver, Revision: 0.3.0 [ 21.390004] initcall sixpack_init_driver+0x0/0x68 returned 0 after 9765 usecs [ 21.400025] calling bpq_init_driver+0x0/0x8c @ 1 [ 21.404750] AX.25: bpqether driver version 004 [ 21.409188] initcall bpq_init_driver+0x0/0x8c returned 0 after 0 usecs [ 21.410004] calling init_baycomserfdx+0x0/0x120 @ 1 [ 21.420002] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 21.420005] baycom_ser_fdx: version 0.10 compiled 22:49:37 Aug 2 2009 [ 21.430031] device: 'bcsf0': device_add [ 21.434998] device: 'bcsf1': device_add [ 21.441145] device: 'bcsf2': device_add [ 21.446202] device: 'bcsf3': device_add [ 21.451234] initcall init_baycomserfdx+0x0/0x120 returned 0 after 29296 usecs [ 21.460006] calling hdlcdrv_init_driver+0x0/0x49 @ 1 [ 21.465054] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 21.470002] hdlcdrv: version 0.8 compiled 22:49:38 Aug 2 2009 [ 21.475830] initcall hdlcdrv_init_driver+0x0/0x49 returned 0 after 9765 usecs [ 21.480003] calling usb_irda_init+0x0/0x65 @ 1 [ 21.484532] bus: 'usb': add driver irda-usb [ 21.490264] usbcore: registered new interface driver irda-usb [ 21.496055] USB IrDA support registered [ 21.500028] initcall usb_irda_init+0x0/0x65 returned 0 after 19531 usecs [ 21.510004] calling nsc_ircc_init+0x0/0x2a8 @ 1 [ 21.514615] Platform driver 'nsc-ircc' needs updating - please use dev_pm_ops [ 21.520004] bus: 'platform': add driver nsc-ircc [ 21.524878] bus: 'platform': remove driver nsc-ircc [ 21.530235] driver: 'nsc-ircc': driver_release [ 21.534681] initcall nsc_ircc_init+0x0/0x2a8 returned -19 after 19531 usecs [ 21.540004] calling smsc_ircc_init+0x0/0x4f9 @ 1 [ 21.544702] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops [ 21.550003] bus: 'platform': add driver smsc-ircc2 [ 21.560427] bus: 'platform': remove driver smsc-ircc2 [ 21.565713] driver: 'smsc-ircc2': driver_release [ 21.570032] initcall smsc_ircc_init+0x0/0x4f9 returned -19 after 29296 usecs [ 21.577076] calling ali_ircc_init+0x0/0x812 @ 1 [ 21.580003] Platform driver 'ali-ircc' needs updating - please use dev_pm_ops [ 21.587126] bus: 'platform': add driver ali-ircc [ 21.590265] bus: 'platform': remove driver ali-ircc [ 21.595340] driver: 'ali-ircc': driver_release [ 21.600010] initcall ali_ircc_init+0x0/0x812 returned -19 after 19531 usecs [ 21.610004] calling via_ircc_init+0x0/0x82 @ 1 [ 21.614541] bus: 'pci': add driver via-ircc [ 21.618972] initcall via_ircc_init+0x0/0x82 returned 0 after 0 usecs [ 21.620005] calling kingsun_init+0x0/0x42 @ 1 [ 21.630007] bus: 'usb': add driver kingsun-sir [ 21.634666] usbcore: registered new interface driver kingsun-sir [ 21.640009] initcall kingsun_init+0x0/0x42 returned 0 after 9765 usecs [ 21.646528] calling ksdazzle_init+0x0/0x42 @ 1 [ 21.650004] bus: 'usb': add driver ksdazzle-sir [ 21.654740] usbcore: registered new interface driver ksdazzle-sir [ 21.660009] initcall ksdazzle_init+0x0/0x42 returned 0 after 9765 usecs [ 21.666616] calling ks959_init+0x0/0x42 @ 1 [ 21.670004] bus: 'usb': add driver ks959-sir [ 21.674483] usbcore: registered new interface driver ks959-sir [ 21.680009] initcall ks959_init+0x0/0x42 returned 0 after 9765 usecs [ 21.690004] calling init_netconsole+0x0/0x260 @ 1 [ 21.694793] console [netcon0] enabled [ 21.698450] netconsole: network logging started [ 21.700004] initcall init_netconsole+0x0/0x260 returned 0 after 9765 usecs [ 21.710006] calling niu_init+0x0/0x64 @ 1 [ 21.714106] bus: 'pci': add driver niu [ 21.718092] initcall niu_init+0x0/0x64 returned 0 after 0 usecs [ 21.720027] calling init+0x0/0x39 @ 1 [ 21.723774] bus: 'virtio': add driver virtio_net [ 21.730233] initcall init+0x0/0x39 returned 0 after 9765 usecs [ 21.736062] calling efx_init_module+0x0/0xfd @ 1 [ 21.740003] Solarflare NET driver v2.3 [ 21.744083] bus: 'pci': add driver sfc [ 21.750249] initcall efx_init_module+0x0/0xfd returned 0 after 9765 usecs [ 21.757032] calling i2400m_driver_init+0x0/0x2d @ 1 [ 21.760005] initcall i2400m_driver_init+0x0/0x2d returned 0 after 0 usecs [ 21.770004] calling i2400ms_driver_init+0x0/0x39 @ 1 [ 21.775049] bus: 'sdio': add driver i2400m_sdio [ 21.780219] initcall i2400ms_driver_init+0x0/0x39 returned 0 after 9765 usecs [ 21.787344] calling i2o_iop_init+0x0/0x6c @ 1 [ 21.790003] I2O subsystem v1.325 [ 21.793227] i2o: max drivers = 8 [ 21.796733] bus: 'i2o': registered [ 21.800255] bus: 'i2o': add driver exec-osm [ 21.804653] bus: 'pci': add driver PCI_I2O [ 21.810304] initcall i2o_iop_init+0x0/0x6c returned 0 after 19531 usecs [ 21.816908] calling i2o_bus_init+0x0/0x68 @ 1 [ 21.820003] I2O Bus Adapter OSM v1.317 [ 21.823749] bus: 'i2o': add driver bus-osm [ 21.830169] initcall i2o_bus_init+0x0/0x68 returned 0 after 9765 usecs [ 21.836688] calling i2o_scsi_init+0x0/0x68 @ 1 [ 21.840003] I2O SCSI Peripheral OSM v1.316 [ 21.844095] bus: 'i2o': add driver scsi-osm [ 21.848521] initcall i2o_scsi_init+0x0/0x68 returned 0 after 0 usecs [ 21.850004] calling fusion_init+0x0/0x164 @ 1 [ 21.860003] Fusion MPT base driver 3.04.10 [ 21.864096] Copyright (c) 1999-2008 LSI Corporation [ 21.869005] initcall fusion_init+0x0/0x164 returned 0 after 0 usecs [ 21.870004] calling mptfc_init+0x0/0x115 @ 1 [ 21.880024] Fusion MPT FC Host driver 3.04.10 [ 21.884408] bus: 'pci': add driver mptfc [ 21.888612] initcall mptfc_init+0x0/0x115 returned 0 after 0 usecs [ 21.890005] calling mptctl_init+0x0/0x141 @ 1 [ 21.894448] Fusion MPT misc device (ioctl) driver 3.04.10 [ 21.900011] device: 'mptctl': device_add [ 21.904214] mptctl: Registered with Fusion MPT base driver [ 21.910004] mptctl: /dev/mptctl @ (major,minor=10,220) [ 21.915135] initcall mptctl_init+0x0/0x141 returned 0 after 19531 usecs [ 21.920004] calling mpt_lan_init+0x0/0xa4 @ 1 [ 21.930005] Fusion MPT LAN driver 3.04.10 [ 21.934011] initcall mpt_lan_init+0x0/0xa4 returned 0 after 0 usecs [ 21.940004] calling fw_core_init+0x0/0xb0 @ 1 [ 21.944692] bus: 'firewire': registered [ 21.948570] initcall fw_core_init+0x0/0xb0 returned 0 after 0 usecs [ 21.950028] calling fw_ohci_init+0x0/0x42 @ 1 [ 21.960009] bus: 'pci': add driver firewire_ohci [ 21.964878] initcall fw_ohci_init+0x0/0x42 returned 0 after 0 usecs [ 21.970009] calling sbp2_init+0x0/0x6d @ 1 [ 21.974287] bus: 'firewire': add driver sbp2 [ 21.980261] initcall sbp2_init+0x0/0x6d returned 0 after 9765 usecs [ 21.986519] calling ohci1394_init+0x0/0x42 @ 1 [ 21.990032] bus: 'pci': add driver ohci1394 [ 21.994449] initcall ohci1394_init+0x0/0x42 returned 0 after 0 usecs [ 22.000074] calling video1394_init_module+0x0/0xfc @ 1 [ 22.005296] bus: 'ieee1394': add driver video1394 [ 22.010222] video1394: Installed video1394 module [ 22.014920] initcall video1394_init_module+0x0/0xfc returned 0 after 9765 usecs [ 22.020022] calling init_raw1394+0x0/0x11a @ 1 [ 22.024560] device: 'raw1394': device_add [ 22.030267] ieee1394: raw1394: /dev/raw1394 device initialized [ 22.036095] bus: 'ieee1394': add driver raw1394 [ 22.040280] initcall init_raw1394+0x0/0x11a returned 0 after 19531 usecs [ 22.050014] calling dv1394_init_module+0x0/0xc5 @ 1 [ 22.054974] bus: 'ieee1394': add driver dv1394 [ 22.059649] initcall dv1394_init_module+0x0/0xc5 returned 0 after 0 usecs [ 22.060004] calling ether1394_init_module+0x0/0x96 @ 1 [ 22.070487] bus: 'ieee1394': add driver eth1394 [ 22.075223] initcall ether1394_init_module+0x0/0x96 returned 0 after 0 usecs [ 22.080005] calling cdrom_init+0x0/0x91 @ 1 [ 22.084268] initcall cdrom_init+0x0/0x91 returned 0 after 0 usecs [ 22.090004] calling ks0108_init+0x0/0xe0 @ 1 [ 22.094359] parport0: cannot grant exclusive access for device ks0108 [ 22.100008] ks0108: ERROR: parport didn't register new device [ 22.110004] initcall ks0108_init+0x0/0xe0 returned -22 after 19531 usecs [ 22.116696] initcall ks0108_init+0x0/0xe0 returned with error code -22 [ 22.120026] calling spi_gpio_init+0x0/0x40 @ 1 [ 22.124557] bus: 'platform': add driver spi_gpio [ 22.130240] bus: 'platform': remove driver spi_gpio [ 22.135310] driver: 'spi_gpio': driver_release [ 22.140011] initcall spi_gpio_init+0x0/0x40 returned -19 after 19531 usecs [ 22.150004] calling init_spi_lm70llp+0x0/0x39 @ 1 [ 22.154796] parport0: cannot grant exclusive access for device spi-lm70llp [ 22.160008] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 22.165578] initcall init_spi_lm70llp+0x0/0x39 returned 0 after 9765 usecs [ 22.170003] calling spidev_init+0x0/0xbf @ 1 [ 22.174363] device class 'spidev': registering [ 22.180245] bus: 'spi': add driver spidev [ 22.184505] initcall spidev_init+0x0/0xbf returned 0 after 9765 usecs [ 22.190005] calling tle62x0_init+0x0/0x39 @ 1 [ 22.194442] bus: 'spi': add driver tle62x0 [ 22.200209] initcall tle62x0_init+0x0/0x39 returned 0 after 9765 usecs [ 22.206729] calling aoe_init+0x0/0xd5 @ 1 [ 22.210011] device class 'aoe': registering [ 22.214438] device: 'err': device_add [ 22.220271] device: 'discover': device_add [ 22.224630] device: 'interfaces': device_add [ 22.230263] device: 'revalidate': device_add [ 22.234776] device: 'flush': device_add [ 22.239272] aoe: AoE v47 initialised. [ 22.240246] initcall aoe_init+0x0/0xd5 returned 0 after 29296 usecs [ 22.250005] calling uwb_subsys_init+0x0/0x77 @ 1 [ 22.254723] device class 'uwb_rc': registering [ 22.259401] initcall uwb_subsys_init+0x0/0x77 returned 0 after 0 usecs [ 22.260006] calling wlp_subsys_init+0x0/0x2d @ 1 [ 22.270004] initcall wlp_subsys_init+0x0/0x2d returned 0 after 0 usecs [ 22.276521] calling umc_bus_init+0x0/0x39 @ 1 [ 22.280259] bus: 'umc': registered [ 22.283663] initcall umc_bus_init+0x0/0x39 returned 0 after 0 usecs [ 22.290005] calling whci_init+0x0/0x42 @ 1 [ 22.294196] bus: 'pci': add driver whci [ 22.298302] initcall whci_init+0x0/0x42 returned 0 after 0 usecs [ 22.300004] calling whcrc_driver_init+0x0/0x42 @ 1 [ 22.310003] bus: 'umc': add driver whc-rc [ 22.314226] initcall whcrc_driver_init+0x0/0x42 returned 0 after 0 usecs [ 22.320005] calling hwarc_driver_init+0x0/0x42 @ 1 [ 22.324879] bus: 'usb': add driver hwa-rc [ 22.330224] usbcore: registered new interface driver hwa-rc [ 22.335799] initcall hwarc_driver_init+0x0/0x42 returned 0 after 9765 usecs [ 22.340005] calling gpio_vbus_init+0x0/0x40 @ 1 [ 22.344616] bus: 'platform': add driver gpio-vbus [ 22.350262] bus: 'platform': remove driver gpio-vbus [ 22.355418] driver: 'gpio-vbus': driver_release [ 22.360011] initcall gpio_vbus_init+0x0/0x40 returned -19 after 19531 usecs [ 22.366962] calling mon_init+0x0/0x141 @ 1 [ 22.370015] device class 'usbmon': registering [ 22.374689] device: 'usbmon0': device_add [ 22.380339] initcall mon_init+0x0/0x141 returned 0 after 9765 usecs [ 22.386599] calling ehci_hcd_init+0x0/0x10e @ 1 [ 22.390004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.400003] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 22.406028] bus: 'pci': add driver ehci_hcd [ 22.410027] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd [ 22.418537] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1 [ 22.420204] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table [ 22.430007] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! [ 22.440005] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 [ 22.446113] initcall ehci_hcd_init+0x0/0x10e returned 0 after 48828 usecs [ 22.450027] calling oxu_module_init+0x0/0x39 @ 1 [ 22.460004] bus: 'platform': add driver oxu210hp-hcd [ 22.465183] initcall oxu_module_init+0x0/0x39 returned 0 after 0 usecs [ 22.470057] calling ohci_hcd_mod_init+0x0/0x101 @ 1 [ 22.475012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.480003] ohci_hcd: block sizes: ed 80 td 96 [ 22.484478] bus: 'pci': add driver ohci_hcd [ 22.490026] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd [ 22.500003] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0 [ 22.508021] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table [ 22.510042] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! [ 22.520008] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 [ 22.530272] bus: 'ssb': add driver ohci_hcd [ 22.534661] initcall ohci_hcd_mod_init+0x0/0x101 returned 0 after 58593 usecs [ 22.540027] calling uhci_hcd_init+0x0/0x159 @ 1 [ 22.544640] uhci_hcd: USB Universal Host Controller Interface driver [ 22.550486] bus: 'pci': add driver uhci_hcd [ 22.554946] initcall uhci_hcd_init+0x0/0x159 returned 0 after 9765 usecs [ 22.560058] calling sl811h_init+0x0/0x67 @ 1 [ 22.570003] sl811: driver sl811-hcd, 19 May 2005 [ 22.574615] bus: 'platform': add driver sl811-hcd [ 22.580206] initcall sl811h_init+0x0/0x67 returned 0 after 9765 usecs [ 22.586641] calling u132_hcd_init+0x0/0xd8 @ 1 [ 22.590023] driver u132_hcd built at 22:49:46 on Aug 2 2009 [ 22.595786] bus: 'platform': add driver u132_hcd [ 22.600300] initcall u132_hcd_init+0x0/0xd8 returned 0 after 9765 usecs [ 22.606910] calling isp1760_init+0x0/0x76 @ 1 [ 22.610798] bus: 'platform': add driver isp1760 [ 22.615539] bus: 'pci': add driver isp1760 [ 22.620298] initcall isp1760_init+0x0/0x76 returned 0 after 9765 usecs [ 22.626814] calling hwahc_driver_init+0x0/0x42 @ 1 [ 22.630011] bus: 'usb': add driver hwa-hc [ 22.634226] usbcore: registered new interface driver hwa-hc [ 22.640009] initcall hwahc_driver_init+0x0/0x42 returned 0 after 9765 usecs [ 22.650004] calling c67x00_init+0x0/0x39 @ 1 [ 22.654356] bus: 'platform': add driver c67x00 [ 22.660321] initcall c67x00_init+0x0/0x39 returned 0 after 9765 usecs [ 22.666752] calling wusbcore_init+0x0/0x9a @ 1 [ 22.670127] initcall wusbcore_init+0x0/0x9a returned 0 after 0 usecs [ 22.676477] calling cbaf_driver_init+0x0/0x42 @ 1 [ 22.680005] bus: 'usb': add driver wusb-cbaf [ 22.684544] usbcore: registered new interface driver wusb-cbaf [ 22.690009] initcall cbaf_driver_init+0x0/0x42 returned 0 after 9765 usecs [ 22.696875] calling acm_init+0x0/0x128 @ 1 [ 22.700016] bus: 'usb': add driver cdc_acm [ 22.704317] usbcore: registered new interface driver cdc_acm [ 22.710007] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 22.720005] initcall acm_init+0x0/0x128 returned 0 after 19531 usecs [ 22.726348] calling usb_stor_init+0x0/0x6a @ 1 [ 22.730004] Initializing USB Mass Storage driver... [ 22.734878] bus: 'usb': add driver usb-storage [ 22.740216] usbcore: registered new interface driver usb-storage [ 22.746220] USB Mass Storage support registered. [ 22.750033] initcall usb_stor_init+0x0/0x6a returned 0 after 19531 usecs [ 22.760004] calling alauda_init+0x0/0x42 @ 1 [ 22.764355] bus: 'usb': add driver ums-alauda [ 22.768974] usbcore: registered new interface driver ums-alauda [ 22.770009] initcall alauda_init+0x0/0x42 returned 0 after 9765 usecs [ 22.780004] calling cypress_init+0x0/0x42 @ 1 [ 22.784444] bus: 'usb': add driver ums-cypress [ 22.790207] usbcore: registered new interface driver ums-cypress [ 22.796213] initcall cypress_init+0x0/0x42 returned 0 after 9765 usecs [ 22.800005] calling datafab_init+0x0/0x42 @ 1 [ 22.804443] bus: 'usb': add driver ums-datafab [ 22.810214] usbcore: registered new interface driver ums-datafab [ 22.816223] initcall datafab_init+0x0/0x42 returned 0 after 9765 usecs [ 22.820005] calling freecom_init+0x0/0x42 @ 1 [ 22.824442] bus: 'usb': add driver ums-freecom [ 22.830229] usbcore: registered new interface driver ums-freecom [ 22.840009] initcall freecom_init+0x0/0x42 returned 0 after 19531 usecs [ 22.846616] calling isd200_init+0x0/0x42 @ 1 [ 22.850004] bus: 'usb': add driver ums-isd200 [ 22.854567] usbcore: registered new interface driver ums-isd200 [ 22.860009] initcall isd200_init+0x0/0x42 returned 0 after 9765 usecs [ 22.866442] calling jumpshot_init+0x0/0x42 @ 1 [ 22.870004] bus: 'usb': add driver ums-jumpshot [ 22.874768] usbcore: registered new interface driver ums-jumpshot [ 22.880009] initcall jumpshot_init+0x0/0x42 returned 0 after 9765 usecs [ 22.886614] calling sddr09_init+0x0/0x42 @ 1 [ 22.890004] bus: 'usb': add driver ums-sddr09 [ 22.894568] usbcore: registered new interface driver ums-sddr09 [ 22.900009] initcall sddr09_init+0x0/0x42 returned 0 after 9765 usecs [ 22.910004] calling usbat_init+0x0/0x42 @ 1 [ 22.914270] bus: 'usb': add driver ums-usbat [ 22.920120] usbcore: registered new interface driver ums-usbat [ 22.925954] initcall usbat_init+0x0/0x42 returned 0 after 9765 usecs [ 22.930006] calling usb_mdc800_init+0x0/0x325 @ 1 [ 22.934801] bus: 'usb': add driver mdc800 [ 22.940213] usbcore: registered new interface driver mdc800 [ 22.945778] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 22.950006] initcall usb_mdc800_init+0x0/0x325 returned 0 after 19531 usecs [ 22.960004] calling microtek_drv_init+0x0/0x42 @ 1 [ 22.964876] bus: 'usb': add driver microtekX6 [ 22.970212] usbcore: registered new interface driver microtekX6 [ 22.976127] initcall microtek_drv_init+0x0/0x42 returned 0 after 9765 usecs [ 22.980005] calling adu_init+0x0/0xba @ 1 [ 22.984094] drivers/usb/misc/adutux.c : adu_init : enter [ 22.990004] bus: 'usb': add driver adutux [ 22.994269] usbcore: registered new interface driver adutux [ 23.000007] adutux adutux (see www.ontrak.net) v0.0.13 [ 23.005142] adutux is an experimental driver. Use at your own risk [ 23.010005] drivers/usb/misc/adutux.c : adu_init : leave, return value 0 [ 23.020004] initcall adu_init+0x0/0xba returned 0 after 39062 usecs [ 23.026260] calling appledisplay_init+0x0/0x80 @ 1 [ 23.030099] bus: 'usb': add driver appledisplay [ 23.034833] usbcore: registered new interface driver appledisplay [ 23.040037] initcall appledisplay_init+0x0/0x80 returned 0 after 9765 usecs [ 23.050004] calling berry_init+0x0/0x42 @ 1 [ 23.054270] bus: 'usb': add driver berry_charge [ 23.059010] usbcore: registered new interface driver berry_charge [ 23.060009] initcall berry_init+0x0/0x42 returned 0 after 9765 usecs [ 23.070004] calling usb_cytherm_init+0x0/0x70 @ 1 [ 23.074789] bus: 'usb': add driver cytherm [ 23.080214] usbcore: registered new interface driver cytherm [ 23.085871] cytherm: v1.0:Cypress USB Thermometer driver [ 23.090006] initcall usb_cytherm_init+0x0/0x70 returned 0 after 19531 usecs [ 23.096955] calling emi26_init+0x0/0x42 @ 1 [ 23.100004] bus: 'usb': add driver emi26 - firmware loader [ 23.105693] usbcore: registered new interface driver emi26 - firmware loader [ 23.110009] initcall emi26_init+0x0/0x42 returned 0 after 9765 usecs [ 23.120004] calling ftdi_elan_init+0x0/0x192 @ 1 [ 23.124700] driver ftdi-elan built at 22:49:45 on Aug 2 2009 [ 23.130336] bus: 'usb': add driver ftdi-elan [ 23.134824] usbcore: registered new interface driver ftdi-elan [ 23.140019] initcall ftdi_elan_init+0x0/0x192 returned 0 after 19531 usecs [ 23.150004] calling iowarrior_init+0x0/0x42 @ 1 [ 23.154617] bus: 'usb': add driver iowarrior [ 23.159099] usbcore: registered new interface driver iowarrior [ 23.160009] initcall iowarrior_init+0x0/0x42 returned 0 after 9765 usecs [ 23.170004] calling isight_firmware_init+0x0/0x42 @ 1 [ 23.175138] bus: 'usb': add driver isight_firmware [ 23.180225] usbcore: registered new interface driver isight_firmware [ 23.186576] initcall isight_firmware_init+0x0/0x42 returned 0 after 9765 usecs [ 23.190005] calling usb_lcd_init+0x0/0x60 @ 1 [ 23.200004] bus: 'usb': add driver usblcd [ 23.204221] usbcore: registered new interface driver usblcd [ 23.210009] initcall usb_lcd_init+0x0/0x60 returned 0 after 9765 usecs [ 23.216530] calling ld_usb_init+0x0/0x60 @ 1 [ 23.220004] bus: 'usb': add driver ldusb [ 23.224135] usbcore: registered new interface driver ldusb [ 23.230011] initcall ld_usb_init+0x0/0x60 returned 0 after 9765 usecs [ 23.236444] calling usb_led_init+0x0/0x60 @ 1 [ 23.240005] bus: 'usb': add driver usbled [ 23.244221] usbcore: registered new interface driver usbled [ 23.250009] initcall usb_led_init+0x0/0x60 returned 0 after 9765 usecs [ 23.256529] calling usb_rio_init+0x0/0x5e @ 1 [ 23.260005] bus: 'usb': add driver rio500 [ 23.264231] usbcore: registered new interface driver rio500 [ 23.270010] rio500: v1.1:USB Rio 500 driver [ 23.274191] initcall usb_rio_init+0x0/0x5e returned 0 after 9765 usecs [ 23.280004] calling tv_init+0x0/0x70 @ 1 [ 23.284008] bus: 'usb': add driver trancevibrator [ 23.290215] usbcore: registered new interface driver trancevibrator [ 23.296480] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver [ 23.300006] initcall tv_init+0x0/0x70 returned 0 after 19531 usecs [ 23.310004] calling usb_sevseg_init+0x0/0x60 @ 1 [ 23.314704] bus: 'usb': add driver usbsevseg [ 23.319184] usbcore: registered new interface driver usbsevseg [ 23.320009] initcall usb_sevseg_init+0x0/0x60 returned 0 after 9765 usecs [ 23.330006] calling vstusb_init+0x0/0x67 @ 1 [ 23.334357] bus: 'usb': add driver vstusb [ 23.340228] usbcore: registered new interface driver vstusb [ 23.345796] initcall vstusb_init+0x0/0x67 returned 0 after 9765 usecs [ 23.350005] calling i8042_init+0x0/0xdb @ 1 [ 23.354318] bus: 'platform': add driver i8042 [ 23.360227] Registering platform device 'i8042'. Parent at platform [ 23.366489] device: 'i8042': device_add [ 23.370013] bus: 'platform': add device i8042 [ 23.374641] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042 [ 23.380003] bus: 'platform': really_probe: probing driver i8042 with device i8042 [ 23.391444] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.391444] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.391444] driver: 'i8042': driver_bound: bound to device 'i8042' [ 23.400096] bus: 'platform': really_probe: bound device i8042 to driver i8042 [ 23.407233] initcall i8042_init+0x0/0xdb returned 0 after 58593 usecs [ 23.410006] calling parkbd_init+0x0/0x230 @ 1 [ 23.414447] parport0: cannot grant exclusive access for device parkbd [ 23.420081] initcall parkbd_init+0x0/0x230 returned -19 after 9765 usecs [ 23.430005] calling serport_init+0x0/0x5a @ 1 [ 23.434443] initcall serport_init+0x0/0x5a returned 0 after 0 usecs [ 23.440031] calling pcips2_init+0x0/0x42 @ 1 [ 23.444400] bus: 'pci': add driver pcips2 [ 23.460000] device: 'serio0': device_add [ 23.460388] initcall pcips2_init+0x0/0x42 returned 0 after 9765 usecs [ 23.460393] calling serio_raw_init+0x0/0x42 @ 1 [ 23.460397] bus: 'serio': add driver serio_raw [ 23.460620] initcall serio_raw_init+0x0/0x42 returned 0 after 0 usecs [ 23.460624] calling emu_init+0x0/0x42 @ 1 [ 23.460641] bus: 'pci': add driver Emu10k1_gameport [ 23.460942] initcall emu_init+0x0/0x42 returned 0 after 0 usecs [ 23.460947] calling fm801_gp_init+0x0/0x42 @ 1 [ 23.460953] bus: 'pci': add driver FM801_gameport [ 23.461189] initcall fm801_gp_init+0x0/0x42 returned 0 after 0 usecs [ 23.461193] calling l4_init+0x0/0x37f @ 1 [ 23.461215] initcall l4_init+0x0/0x37f returned -19 after 0 usecs [ 23.461219] calling ns558_init+0x0/0x311 @ 1 [ 23.470000] initcall ns558_init+0x0/0x311 returned -19 after 0 usecs [ 23.470000] calling mousedev_init+0x0/0x87 @ 1 [ 23.470000] device: 'mice': device_add [ 23.470000] mice: PS/2 mouse device common for all mice [ 23.470000] initcall mousedev_init+0x0/0x87 returned 0 after 0 usecs [ 23.470000] calling joydev_init+0x0/0x39 @ 1 [ 23.470000] initcall joydev_init+0x0/0x39 returned 0 after 0 usecs [ 23.470000] calling evdev_init+0x0/0x39 @ 1 [ 23.470000] initcall evdev_init+0x0/0x39 returned 0 after 0 usecs [ 23.470000] calling evbug_init+0x0/0x39 @ 1 [ 23.470000] initcall evbug_init+0x0/0x39 returned 0 after 0 usecs [ 23.470000] calling atkbd_init+0x0/0x42 @ 1 [ 23.470000] bus: 'serio': add driver atkbd [ 23.470000] initcall atkbd_init+0x0/0x42 returned 0 after 0 usecs [ 23.470000] calling gpio_keys_init+0x0/0x39 @ 1 [ 23.470000] bus: 'platform': add driver gpio-keys [ 23.470000] initcall gpio_keys_init+0x0/0x39 returned 0 after 0 usecs [ 23.470000] calling lkkbd_init+0x0/0x42 @ 1 [ 23.470000] bus: 'serio': add driver lkkbd [ 23.470000] initcall lkkbd_init+0x0/0x42 returned 0 after 0 usecs [ 23.470000] calling lm8323_init+0x0/0x3b @ 1 [ 23.470000] bus: 'i2c': add driver lm8323 [ 23.470000] initcall lm8323_init+0x0/0x3b returned 0 after 0 usecs [ 23.470000] calling matrix_keypad_init+0x0/0x39 @ 1 [ 23.470000] bus: 'platform': add driver matrix-keypad [ 23.470000] initcall matrix_keypad_init+0x0/0x39 returned 0 after 0 usecs [ 23.470000] calling sunkbd_init+0x0/0x42 @ 1 [ 23.470000] bus: 'serio': add driver sunkbd [ 23.470000] initcall sunkbd_init+0x0/0x42 returned 0 after 0 usecs [ 23.470000] calling xtkbd_init+0x0/0x42 @ 1 [ 23.470000] bus: 'serio': add driver xtkbd [ 23.470000] initcall xtkbd_init+0x0/0x42 returned 0 after 0 usecs [ 23.470000] calling atp_init+0x0/0x42 @ 1 [ 23.470000] bus: 'usb': add driver appletouch [ 23.470000] usbcore: registered new interface driver appletouch [ 23.470000] initcall atp_init+0x0/0x42 returned 0 after 0 usecs [ 23.470000] calling gpio_mouse_init+0x0/0x39 @ 1 [ 23.470000] bus: 'platform': add driver gpio_mouse [ 23.470000] initcall gpio_mouse_init+0x0/0x39 returned 0 after 0 usecs [ 23.470000] calling psmouse_init+0x0/0x9a @ 1 [ 23.470000] bus: 'serio': add device serio0 [ 23.480948] bus: 'serio': add driver psmouse [ 23.485465] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd [ 23.485622] initcall psmouse_init+0x0/0x9a returned 0 after 19531 usecs [ 23.485627] calling sermouse_init+0x0/0x42 @ 1 [ 23.485630] bus: 'serio': add driver sermouse [ 23.485878] initcall sermouse_init+0x0/0x42 returned 0 after 0 usecs [ 23.485882] calling synaptics_i2c_init+0x0/0x3b @ 1 [ 23.485887] bus: 'i2c': add driver synaptics_i2c [ 23.486098] initcall synaptics_i2c_init+0x0/0x3b returned 0 after 0 usecs [ 23.486103] calling vsxxxaa_init+0x0/0x42 @ 1 [ 23.486106] bus: 'serio': add driver vsxxxaa [ 23.486356] initcall vsxxxaa_init+0x0/0x42 returned 0 after 0 usecs [ 23.486360] calling a3d_init+0x0/0x42 @ 1 [ 23.486363] bus: 'gameport': add driver adc [ 23.486581] initcall a3d_init+0x0/0x42 returned 0 after 0 usecs [ 23.486585] calling analog_init+0x0/0x118 @ 1 [ 23.486588] bus: 'gameport': add driver analog [ 23.486841] initcall analog_init+0x0/0x118 returned 0 after 0 usecs [ 23.486845] calling gc_init+0x0/0x62b @ 1 [ 23.486850] initcall gc_init+0x0/0x62b returned -19 after 0 usecs [ 23.486853] calling gf2k_init+0x0/0x42 @ 1 [ 23.486856] bus: 'gameport': add driver gf2k [ 23.487069] initcall gf2k_init+0x0/0x42 returned 0 after 0 usecs [ 23.487073] calling grip_init+0x0/0x42 @ 1 [ 23.487076] bus: 'gameport': add driver grip_mp [ 23.487326] initcall grip_init+0x0/0x42 returned 0 after 0 usecs [ 23.487330] calling iforce_init+0x0/0x42 @ 1 [ 23.487333] bus: 'serio': add driver iforce [ 23.487558] initcall iforce_init+0x0/0x42 returned 0 after 0 usecs [ 23.487563] calling interact_init+0x0/0x42 @ 1 [ 23.487566] bus: 'gameport': add driver interact [ 23.487813] initcall interact_init+0x0/0x42 returned 0 after 0 usecs [ 23.487818] calling magellan_init+0x0/0x42 @ 1 [ 23.487821] bus: 'serio': add driver magellan [ 23.488056] initcall magellan_init+0x0/0x42 returned 0 after 0 usecs [ 23.488060] calling sw_init+0x0/0x42 @ 1 [ 23.488063] bus: 'gameport': add driver sidewinder [ 23.488307] initcall sw_init+0x0/0x42 returned 0 after 0 usecs [ 23.488311] calling spaceball_init+0x0/0x42 @ 1 [ 23.488315] bus: 'serio': add driver spaceball [ 23.488531] initcall spaceball_init+0x0/0x42 returned 0 after 0 usecs [ 23.488535] calling spaceorb_init+0x0/0x42 @ 1 [ 23.488538] bus: 'serio': add driver spaceorb [ 23.488796] initcall spaceorb_init+0x0/0x42 returned 0 after 0 usecs [ 23.488800] calling stinger_init+0x0/0x42 @ 1 [ 23.488803] bus: 'serio': add driver stinger [ 23.489038] initcall stinger_init+0x0/0x42 returned 0 after 0 usecs [ 23.489042] calling tmdc_init+0x0/0x42 @ 1 [ 23.489045] bus: 'gameport': add driver tmdc [ 23.489289] initcall tmdc_init+0x0/0x42 returned 0 after 0 usecs [ 23.489293] calling tgfx_init+0x0/0x4a2 @ 1 [ 23.489298] initcall tgfx_init+0x0/0x4a2 returned -19 after 0 usecs [ 23.489302] calling walkera0701_init+0x0/0x2c8 @ 1 [ 23.489305] walkera0701: parport without interrupt [ 23.489310] initcall walkera0701_init+0x0/0x2c8 returned -19 after 0 usecs [ 23.489314] calling ad7877_init+0x0/0x39 @ 1 [ 23.489319] bus: 'spi': add driver ad7877 [ 23.489530] initcall ad7877_init+0x0/0x39 returned 0 after 0 usecs [ 23.489535] calling ad7879_init+0x0/0x39 @ 1 [ 23.489539] bus: 'spi': add driver ad7879 [ 23.489782] initcall ad7879_init+0x0/0x39 returned 0 after 0 usecs [ 23.489787] calling elo_init+0x0/0x42 @ 1 [ 23.489791] bus: 'serio': add driver elo [ 23.490056] initcall elo_init+0x0/0x42 returned 0 after 9765 usecs [ 23.490060] calling fujitsu_init+0x0/0x42 @ 1 [ 23.490063] bus: 'serio': add driver fujitsu_ts [ 23.490326] initcall fujitsu_init+0x0/0x42 returned 0 after 0 usecs [ 23.490331] calling usbtouch_init+0x0/0x42 @ 1 [ 23.490342] bus: 'usb': add driver usbtouchscreen [ 23.490574] usbcore: registered new interface driver usbtouchscreen [ 23.490584] initcall usbtouch_init+0x0/0x42 returned 0 after 0 usecs [ 23.490588] calling touchit213_init+0x0/0x42 @ 1 [ 23.490592] bus: 'serio': add driver touchit213 [ 23.490840] initcall touchit213_init+0x0/0x42 returned 0 after 0 usecs [ 23.490844] calling tr_init+0x0/0x42 @ 1 [ 23.490847] bus: 'serio': add driver touchright [ 23.491083] initcall tr_init+0x0/0x42 returned 0 after 0 usecs [ 23.491087] calling tw_init+0x0/0x42 @ 1 [ 23.491090] bus: 'serio': add driver touchwin [ 23.491350] initcall tw_init+0x0/0x42 returned 0 after 0 usecs [ 23.491354] calling tsc2007_init+0x0/0x3b @ 1 [ 23.491359] bus: 'i2c': add driver tsc2007 [ 23.491582] initcall tsc2007_init+0x0/0x3b returned 0 after 0 usecs [ 23.491586] calling da9034_touch_init+0x0/0x39 @ 1 [ 23.491593] bus: 'platform': add driver da9034-touch [ 23.491847] initcall da9034_touch_init+0x0/0x39 returned 0 after 0 usecs [ 23.491852] calling w90x900ts_init+0x0/0x39 @ 1 [ 23.491856] bus: 'platform': add driver w90x900-ts [ 23.492067] initcall w90x900ts_init+0x0/0x39 returned 0 after 0 usecs [ 23.492072] calling i2c_dev_init+0x0/0xcb @ 1 [ 23.492074] i2c /dev entries driver [ 23.492096] device class 'i2c-dev': registering [ 23.492345] bus: 'i2c': add driver dev_driver [ 23.492554] initcall i2c_dev_init+0x0/0xcb returned 0 after 0 usecs [ 23.492559] calling i2c_ali1535_init+0x0/0x42 @ 1 [ 23.492580] bus: 'pci': add driver ali1535_smbus [ 23.492884] initcall i2c_ali1535_init+0x0/0x42 returned 0 after 0 usecs [ 23.492889] calling ali1563_init+0x0/0x42 @ 1 [ 23.492896] bus: 'pci': add driver ali1563_smbus [ 23.493123] initcall ali1563_init+0x0/0x42 returned 0 after 0 usecs [ 23.493128] calling i2c_amd8111_init+0x0/0x42 @ 1 [ 23.493135] bus: 'pci': add driver amd8111_smbus2 [ 23.493409] initcall i2c_amd8111_init+0x0/0x42 returned 0 after 0 usecs [ 23.493414] calling i2c_i801_init+0x0/0x42 @ 1 [ 23.493421] bus: 'pci': add driver i801_smbus [ 23.493655] initcall i2c_i801_init+0x0/0x42 returned 0 after 0 usecs [ 23.493660] calling i2c_sch_init+0x0/0x42 @ 1 [ 23.493667] bus: 'pci': add driver isch_smbus [ 23.493961] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs [ 23.493966] calling nforce2_init+0x0/0x42 @ 1 [ 23.493972] bus: 'pci': add driver nForce2_smbus [ 23.493992] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus [ 23.493996] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1 [ 23.502943] device: 'i2c-0': device_add [ 23.520109] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.560018] device: '0-0050': device_add [ 23.560030] bus: 'i2c': add device 0-0050 [ 23.560275] bus: 'i2c': driver_probe_device: matched device 0-0050 with driver eeprom [ 23.560279] bus: 'i2c': really_probe: probing driver eeprom with device 0-0050 [ 23.560297] driver: '0-0050': driver_bound: bound to device 'eeprom' [ 23.560301] bus: 'i2c': really_probe: bound device 0-0050 to driver eeprom [ 23.600037] device: '0-0051': device_add [ 23.600047] bus: 'i2c': add device 0-0051 [ 23.600260] bus: 'i2c': driver_probe_device: matched device 0-0051 with driver eeprom [ 23.600264] bus: 'i2c': really_probe: probing driver eeprom with device 0-0051 [ 23.600281] driver: '0-0051': driver_bound: bound to device 'eeprom' [ 23.600284] bus: 'i2c': really_probe: bound device 0-0051 to driver eeprom [ 23.620068] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.640030] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.660010] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.680010] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.700009] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.720010] i2c-adapter i2c-0: Transaction failed (0x10)! [ 23.720057] device: 'i2c-0': device_add [ 23.720362] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 23.720377] device: 'i2c-1': device_add [ 23.740111] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.760034] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.780012] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.800010] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.820010] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.840009] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.860009] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.880009] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.900010] i2c-adapter i2c-1: Transaction failed (0x10)! [ 23.900027] device: 'i2c-1': device_add [ 23.900284] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 23.900309] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus' [ 23.900316] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus [ 23.900560] initcall nforce2_init+0x0/0x42 returned 0 after 400390 usecs [ 23.900566] calling i2c_piix4_init+0x0/0x42 @ 1 [ 23.900585] bus: 'pci': add driver piix4_smbus [ 23.900849] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs [ 23.900854] calling i2c_sis5595_init+0x0/0x42 @ 1 [ 23.900861] bus: 'pci': add driver sis5595_smbus [ 23.901126] initcall i2c_sis5595_init+0x0/0x42 returned 0 after 0 usecs [ 23.901131] calling i2c_sis630_init+0x0/0x42 @ 1 [ 23.901138] bus: 'pci': add driver sis630_smbus [ 23.901370] initcall i2c_sis630_init+0x0/0x42 returned 0 after 0 usecs [ 23.901375] calling i2c_sis96x_init+0x0/0x42 @ 1 [ 23.901382] bus: 'pci': add driver sis96x_smbus [ 23.901649] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 0 usecs [ 23.901653] calling ocores_i2c_init+0x0/0x39 @ 1 [ 23.901660] bus: 'platform': add driver ocores-i2c [ 23.901889] initcall ocores_i2c_init+0x0/0x39 returned 0 after 0 usecs [ 23.901894] calling i2c_adap_simtec_init+0x0/0x39 @ 1 [ 23.901898] bus: 'platform': add driver simtec-i2c [ 23.902143] initcall i2c_adap_simtec_init+0x0/0x39 returned 0 after 0 usecs [ 23.902148] calling i2c_parport_init+0x0/0x171 @ 1 [ 23.902151] i2c-parport-light: adapter type unspecified [ 23.902156] initcall i2c_parport_init+0x0/0x171 returned -19 after 0 usecs [ 23.902160] calling taos_init+0x0/0x42 @ 1 [ 23.902166] bus: 'serio': add driver taos-evm [ 23.902387] initcall taos_init+0x0/0x42 returned 0 after 0 usecs [ 23.902391] calling tsl2550_init+0x0/0x3b @ 1 [ 23.902395] bus: 'i2c': add driver tsl2550 [ 23.902643] initcall tsl2550_init+0x0/0x3b returned 0 after 0 usecs [ 23.902648] calling videodev_init+0x0/0xad @ 1 [ 23.902651] Linux video capture interface: v2.00 [ 23.902657] device class 'video4linux': registering [ 23.902872] initcall videodev_init+0x0/0xad returned 0 after 0 usecs [ 23.902877] calling dabusb_init+0x0/0x11b @ 1 [ 23.902993] bus: 'usb': add driver dabusb [ 23.903247] usbcore: registered new interface driver dabusb [ 23.903253] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999 [ 23.903259] initcall dabusb_init+0x0/0x11b returned 0 after 0 usecs [ 23.903264] calling gemtek_pci_init+0x0/0x42 @ 1 [ 23.903281] bus: 'pci': add driver gemtek_pci [ 23.903564] initcall gemtek_pci_init+0x0/0x42 returned 0 after 0 usecs [ 23.903569] calling maestro_radio_init+0x0/0x5e @ 1 [ 23.903576] bus: 'pci': add driver maestro_radio [ 23.903842] initcall maestro_radio_init+0x0/0x5e returned 0 after 0 usecs [ 23.903847] calling dsbr100_init+0x0/0x5a @ 1 [ 23.903854] bus: 'usb': add driver dsbr100 [ 23.904063] usbcore: registered new interface driver dsbr100 [ 23.904070] dsbr100: v0.46:D-Link DSB-R100 USB FM radio driver [ 23.904075] initcall dsbr100_init+0x0/0x5a returned 0 after 0 usecs [ 23.904080] calling tea5764_init+0x0/0x53 @ 1 [ 23.904085] bus: 'i2c': add driver radio-tea5764 [ 23.904343] radio_tea5764: v0.01: A driver for the TEA5764 radio chip for EZX Phones. [ 23.904349] initcall tea5764_init+0x0/0x53 returned 0 after 0 usecs [ 23.904355] calling w1_init+0x0/0xcd @ 1 [ 23.904357] Driver for 1-wire Dallas network protocol. [ 23.904602] bus: 'w1': registered [ 23.904606] bus: 'w1': add driver w1_master_driver [ 23.904867] bus: 'w1': add driver w1_slave_driver [ 23.905126] initcall w1_init+0x0/0xcd returned 0 after 0 usecs [ 23.905131] calling matrox_w1_init+0x0/0x42 @ 1 [ 23.905144] bus: 'pci': add driver matrox_w1 [ 23.905432] initcall matrox_w1_init+0x0/0x42 returned 0 after 0 usecs [ 23.905437] calling ds_init+0x0/0x65 @ 1 [ 23.905445] bus: 'usb': add driver DS9490R [ 23.905664] usbcore: registered new interface driver DS9490R [ 23.905675] initcall ds_init+0x0/0x65 returned 0 after 0 usecs [ 23.905679] calling sensors_ds2482_init+0x0/0x3b @ 1 [ 23.905684] bus: 'i2c': add driver ds2482 [ 23.905953] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 0 usecs [ 23.905957] calling w1_therm_init+0x0/0x5b @ 1 [ 23.906032] initcall w1_therm_init+0x0/0x5b returned 0 after 0 usecs [ 23.906036] calling w1_smem_init+0x0/0x65 @ 1 [ 23.906041] initcall w1_smem_init+0x0/0x65 returned 0 after 0 usecs [ 23.906045] calling w1_f2d_init+0x0/0x39 @ 1 [ 23.906049] initcall w1_f2d_init+0x0/0x39 returned 0 after 0 usecs [ 23.906053] calling w1_ds2760_init+0x0/0x51 @ 1 [ 23.906055] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 23.906061] initcall w1_ds2760_init+0x0/0x51 returned 0 after 0 usecs [ 23.906065] calling w1_bq27000_init+0x0/0x49 @ 1 [ 23.906069] initcall w1_bq27000_init+0x0/0x49 returned -17 after 0 usecs [ 23.906074] initcall w1_bq27000_init+0x0/0x49 returned with error code -17 [ 23.906078] calling pda_power_init+0x0/0x39 @ 1 [ 23.906084] bus: 'platform': add driver pda-power [ 23.906308] initcall pda_power_init+0x0/0x39 returned 0 after 0 usecs [ 23.906312] calling ds2760_battery_init+0x0/0x39 @ 1 [ 23.906316] bus: 'platform': add driver ds2760-battery [ 23.906595] initcall ds2760_battery_init+0x0/0x39 returned 0 after 0 usecs [ 23.906600] calling bq27x00_battery_init+0x0/0x57 @ 1 [ 23.906605] bus: 'i2c': add driver bq27200-battery [ 23.906817] initcall bq27x00_battery_init+0x0/0x57 returned 0 after 0 usecs [ 23.906822] calling da903x_battery_init+0x0/0x3e @ 1 [ 23.906827] bus: 'platform': add driver da903x-battery [ 23.907070] initcall da903x_battery_init+0x0/0x3e returned 0 after 0 usecs [ 23.907075] calling max17040_init+0x0/0x3b @ 1 [ 23.907078] bus: 'i2c': add driver max17040 [ 23.907291] initcall max17040_init+0x0/0x3b returned 0 after 0 usecs [ 23.907295] calling pcipcwd_init_module+0x0/0x5c @ 1 [ 23.907313] bus: 'pci': add driver pcwd_pci [ 23.907592] initcall pcipcwd_init_module+0x0/0x5c returned 0 after 0 usecs [ 23.907596] calling wdtpci_init+0x0/0x42 @ 1 [ 23.907603] bus: 'pci': add driver wdt_pci [ 23.907864] initcall wdtpci_init+0x0/0x42 returned 0 after 0 usecs [ 23.907868] calling usb_pcwd_init+0x0/0x70 @ 1 [ 23.907879] bus: 'usb': add driver pcwd_usb [ 23.908125] usbcore: registered new interface driver pcwd_usb [ 23.908131] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02 [ 23.908136] initcall usb_pcwd_init+0x0/0x70 returned 0 after 0 usecs [ 23.908142] calling twl4030_wdt_init+0x0/0x3e @ 1 [ 23.908147] bus: 'platform': add driver twl4030_wdt [ 23.908361] initcall twl4030_wdt_init+0x0/0x3e returned 0 after 0 usecs [ 23.908365] calling advwdt_init+0x0/0x83 @ 1 [ 23.908368] WDT driver for Advantech single board computer initialising. [ 23.908372] bus: 'platform': add driver advantechwdt [ 23.908622] Registering platform device 'advantechwdt'. Parent at platform [ 23.908628] device: 'advantechwdt': device_add [ 23.908641] bus: 'platform': add device advantechwdt [ 23.908881] bus: 'platform': driver_probe_device: matched device advantechwdt with driver advantechwdt [ 23.908886] bus: 'platform': really_probe: probing driver advantechwdt with device advantechwdt [ 23.908908] device: 'watchdog': device_add [ 23.909178] advantechwdt: initialized. timeout=60 sec (nowayout=1) [ 23.909182] driver: 'advantechwdt': driver_bound: bound to device 'advantechwdt' [ 23.909186] bus: 'platform': really_probe: bound device advantechwdt to driver advantechwdt [ 23.909195] initcall advwdt_init+0x0/0x83 returned 0 after 0 usecs [ 23.909199] calling watchdog_init+0x0/0x18d @ 1 [ 23.909223] initcall watchdog_init+0x0/0x18d returned -19 after 0 usecs [ 23.909227] calling alim7101_wdt_init+0x0/0x1b7 @ 1 [ 23.909229] alim7101_wdt: Steve Hill <[email protected]>. [ 23.909239] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 23.909243] initcall alim7101_wdt_init+0x0/0x1b7 returned -16 after 0 usecs [ 23.909246] initcall alim7101_wdt_init+0x0/0x1b7 returned with error code -16 [ 23.909250] calling wafwdt_init+0x0/0x18e @ 1 [ 23.909252] WDT driver for Wafer 5823 single board computer initialising. [ 23.909259] Wafer 5823 WDT: I/O address 0x0443 already in use [ 23.909265] initcall wafwdt_init+0x0/0x18e returned -5 after 0 usecs [ 23.909268] initcall wafwdt_init+0x0/0x18e returned with error code -5 [ 23.909272] calling watchdog_init+0x0/0x8a @ 1 [ 23.909274] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 [ 23.909278] bus: 'platform': add driver i6300ESB timer [ 23.909525] Registering platform device 'i6300ESB timer'. Parent at platform [ 23.909530] device: 'i6300ESB timer': device_add [ 23.909541] bus: 'platform': add device i6300ESB timer [ 23.909803] bus: 'platform': driver_probe_device: matched device i6300ESB timer with driver i6300ESB timer [ 23.909808] bus: 'platform': really_probe: probing driver i6300ESB timer with device i6300ESB timer [ 23.909849] initcall watchdog_init+0x0/0x8a returned 0 after 0 usecs [ 23.909853] calling iTCO_wdt_init_module+0x0/0x8a @ 1 [ 23.909855] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 23.909859] bus: 'platform': add driver iTCO_wdt [ 23.910131] Registering platform device 'iTCO_wdt'. Parent at platform [ 23.910137] device: 'iTCO_wdt': device_add [ 23.910148] bus: 'platform': add device iTCO_wdt [ 23.910399] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt [ 23.910403] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt [ 23.910497] iTCO_wdt: No card detected [ 23.910514] initcall iTCO_wdt_init_module+0x0/0x8a returned 0 after 9765 usecs [ 23.910518] calling it87_wdt_init+0x0/0x4ee @ 1 [ 23.910597] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07 [ 23.910601] initcall it87_wdt_init+0x0/0x4ee returned -19 after 0 usecs [ 23.910605] calling hpwdt_init+0x0/0x42 @ 1 [ 23.910626] bus: 'pci': add driver hpwdt [ 23.910923] initcall hpwdt_init+0x0/0x42 returned 0 after 0 usecs [ 23.910927] calling pc87413_init+0x0/0xb5 @ 1 [ 23.910930] pc87413 WDT: Version 1.1 at io 0x2E [ 23.910934] pc87413 WDT: cannot register miscdev on minor=130 (err=-16) [ 23.910939] initcall pc87413_init+0x0/0xb5 returned -16 after 0 usecs [ 23.910943] initcall pc87413_init+0x0/0xb5 returned with error code -16 [ 23.910947] calling sbc60xxwdt_init+0x0/0x1ab @ 1 [ 23.910955] sbc60xxwdt: I/O address 0x0443 already in use [ 23.910959] initcall sbc60xxwdt_init+0x0/0x1ab returned -5 after 0 usecs [ 23.910964] initcall sbc60xxwdt_init+0x0/0x1ab returned with error code -5 [ 23.910968] calling sbc8360_init+0x0/0x1ca @ 1 [ 23.910973] sbc8360: failed to register misc device [ 23.910981] initcall sbc8360_init+0x0/0x1ca returned -16 after 0 usecs [ 23.910985] initcall sbc8360_init+0x0/0x1ca returned with error code -16 [ 23.910989] calling sch311x_wdt_init+0x0/0x176 @ 1 [ 23.911017] initcall sch311x_wdt_init+0x0/0x176 returned -19 after 0 usecs [ 23.911022] calling wb_smsc_wdt_init+0x0/0x1de @ 1 [ 23.911024] SMsC 37B787 watchdog component driver 1.1 initialising... [ 23.912089] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 23.912096] initcall wb_smsc_wdt_init+0x0/0x1de returned -16 after 0 usecs [ 23.912100] initcall wb_smsc_wdt_init+0x0/0x1de returned with error code -16 [ 23.912105] calling w83877f_wdt_init+0x0/0x183 @ 1 [ 23.912111] w83877f_wdt: I/O address 0x0443 already in use [ 23.912118] initcall w83877f_wdt_init+0x0/0x183 returned -5 after 0 usecs [ 23.912122] initcall w83877f_wdt_init+0x0/0x183 returned with error code -5 [ 23.912126] calling watchdog_init+0x0/0xde @ 1 [ 23.912131] epx_c3: cannot register miscdev on minor=130 (err=-16) [ 23.912137] initcall watchdog_init+0x0/0xde returned -16 after 0 usecs [ 23.912141] initcall watchdog_init+0x0/0xde returned with error code -16 [ 23.912145] calling watchdog_init+0x0/0xdb @ 1 [ 23.912148] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 23.912153] initcall watchdog_init+0x0/0xdb returned -16 after 0 usecs [ 23.912157] initcall watchdog_init+0x0/0xdb returned with error code -16 [ 23.912161] calling telephony_init+0x0/0x71 @ 1 [ 23.912163] Linux telephony interface: v1.00 [ 23.912175] initcall telephony_init+0x0/0x71 returned 0 after 0 usecs [ 23.912178] calling vhci_init+0x0/0x73 @ 1 [ 23.912181] Bluetooth: Virtual HCI driver ver 1.3 [ 23.912191] device: 'vhci': device_add [ 23.912476] initcall vhci_init+0x0/0x73 returned 0 after 0 usecs [ 23.912480] calling hci_uart_init+0x0/0x109 @ 1 [ 23.912483] Bluetooth: HCI UART driver ver 2.2 [ 23.912486] Bluetooth: HCI H4 protocol initialized [ 23.912489] Bluetooth: HCILL protocol initialized [ 23.912493] initcall hci_uart_init+0x0/0x109 returned 0 after 0 usecs [ 23.912497] calling bpa10x_init+0x0/0x55 @ 1 [ 23.912499] Bluetooth: Digianswer Bluetooth USB driver ver 0.10 [ 23.912510] bus: 'usb': add driver bpa10x [ 23.912728] usbcore: registered new interface driver bpa10x [ 23.912737] initcall bpa10x_init+0x0/0x55 returned 0 after 0 usecs [ 23.912741] calling bfusb_init+0x0/0x78 @ 1 [ 23.912743] Bluetooth: BlueFRITZ! USB driver ver 1.2 [ 23.912748] bus: 'usb': add driver bfusb [ 23.912992] usbcore: registered new interface driver bfusb [ 23.913000] initcall bfusb_init+0x0/0x78 returned 0 after 0 usecs [ 23.913004] calling btusb_init+0x0/0x55 @ 1 [ 23.913007] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 23.913012] bus: 'usb': add driver btusb [ 23.913235] usbcore: registered new interface driver btusb [ 23.913244] initcall btusb_init+0x0/0x55 returned 0 after 0 usecs [ 23.913248] calling btsdio_init+0x0/0x4c @ 1 [ 23.913250] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 23.913255] bus: 'sdio': add driver btsdio [ 23.913508] initcall btsdio_init+0x0/0x4c returned 0 after 0 usecs [ 23.913513] calling isdn_init+0x0/0x35c @ 1 [ 23.916520] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2 [ 23.916536] initcall isdn_init+0x0/0x35c returned 0 after 0 usecs [ 23.916540] calling isdn_bsdcomp_init+0x0/0x55 @ 1 [ 23.916542] PPP BSD Compression module registered [ 23.916546] initcall isdn_bsdcomp_init+0x0/0x55 returned 0 after 0 usecs [ 23.916549] calling divert_init+0x0/0x8a @ 1 [ 23.916583] dss1_divert module successfully installed [ 23.916587] initcall divert_init+0x0/0x8a returned 0 after 0 usecs [ 23.916590] calling cpufreq_stats_init+0x0/0xca @ 1 [ 23.916669] initcall cpufreq_stats_init+0x0/0xca returned 0 after 0 usecs [ 23.916673] calling cpufreq_gov_userspace_init+0x0/0x39 @ 1 [ 23.916678] initcall cpufreq_gov_userspace_init+0x0/0x39 returned 0 after 0 usecs [ 23.916682] calling cpufreq_gov_dbs_init+0x0/0xd5 @ 1 [ 23.921086] initcall cpufreq_gov_dbs_init+0x0/0xd5 returned 0 after 9765 usecs [ 23.921091] calling i7300_idle_init+0x0/0x649 @ 1 [ 23.921183] initcall i7300_idle_init+0x0/0x649 returned -19 after 0 usecs [ 23.921187] calling mmc_test_init+0x0/0x39 @ 1 [ 23.921192] bus: 'mmc': add driver mmc_test [ 23.923942] initcall mmc_test_init+0x0/0x39 returned 0 after 0 usecs [ 23.923947] calling sdio_uart_init+0x0/0x11a @ 1 [ 23.923979] bus: 'sdio': add driver sdio_uart [ 23.924202] initcall sdio_uart_init+0x0/0x11a returned 0 after 0 usecs [ 23.924207] calling wbsd_drv_init+0x0/0xb5 @ 1 [ 23.924209] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 23.924212] wbsd: Copyright(c) Pierre Ossman [ 23.924220] bus: 'platform': add driver wbsd [ 23.924478] Registering platform device 'wbsd'. Parent at platform [ 23.924484] device: 'wbsd': device_add [ 23.924498] bus: 'platform': add device wbsd [ 23.924725] bus: 'platform': driver_probe_device: matched device wbsd with driver wbsd [ 23.924729] bus: 'platform': really_probe: probing driver wbsd with device wbsd [ 23.924965] initcall wbsd_drv_init+0x0/0xb5 returned 0 after 0 usecs [ 23.924969] calling memstick_init+0x0/0xab @ 1 [ 23.925344] bus: 'memstick': registered [ 23.925347] device class 'memstick_host': registering [ 23.925592] initcall memstick_init+0x0/0xab returned 0 after 0 usecs [ 23.925597] calling tifm_ms_init+0x0/0x39 @ 1 [ 23.925601] bus: 'tifm': add driver tifm_ms [ 23.925821] initcall tifm_ms_init+0x0/0x39 returned 0 after 0 usecs [ 23.925825] calling bd2802_init+0x0/0x3b @ 1 [ 23.925831] bus: 'i2c': add driver BD2802 [ 23.926080] initcall bd2802_init+0x0/0x3b returned 0 after 0 usecs [ 23.926085] calling alix_led_init+0x0/0x132 @ 1 [ 23.931221] initcall alix_led_init+0x0/0x132 returned -19 after 9765 usecs [ 23.931225] calling pca9532_init+0x0/0x3b @ 1 [ 23.931229] bus: 'i2c': add driver pca9532 [ 23.931449] initcall pca9532_init+0x0/0x3b returned 0 after 0 usecs [ 23.931453] calling gpio_led_init+0x0/0x2d @ 1 [ 23.931457] initcall gpio_led_init+0x0/0x2d returned 0 after 0 usecs [ 23.931461] calling dac124s085_leds_init+0x0/0x39 @ 1 [ 23.931467] bus: 'spi': add driver dac124s085 [ 23.931710] initcall dac124s085_leds_init+0x0/0x39 returned 0 after 0 usecs [ 23.931715] calling timer_trig_init+0x0/0x39 @ 1 [ 23.931723] initcall timer_trig_init+0x0/0x39 returned 0 after 0 usecs [ 23.931727] calling heartbeat_trig_init+0x0/0x39 @ 1 [ 23.931733] initcall heartbeat_trig_init+0x0/0x39 returned 0 after 0 usecs [ 23.931737] calling gpio_trig_init+0x0/0x39 @ 1 [ 23.931742] initcall gpio_trig_init+0x0/0x39 returned 0 after 0 usecs [ 23.931746] calling ib_core_init+0x0/0x6a @ 1 [ 23.931748] device class 'infiniband': registering [ 23.931998] initcall ib_core_init+0x0/0x6a returned 0 after 0 usecs [ 23.932002] calling ib_mad_init_module+0x0/0xca @ 1 [ 23.932521] initcall ib_mad_init_module+0x0/0xca returned 0 after 0 usecs [ 23.932525] calling ib_sa_init+0x0/0xc1 @ 1 [ 23.932625] initcall ib_sa_init+0x0/0xc1 returned 0 after 0 usecs [ 23.932629] calling ib_cm_init+0x0/0x180 @ 1 [ 23.932703] device class 'infiniband_cm': registering [ 23.950396] initcall ib_cm_init+0x0/0x180 returned 0 after 19531 usecs [ 23.950402] calling iw_cm_init+0x0/0x5c @ 1 [ 23.950487] initcall iw_cm_init+0x0/0x5c returned 0 after 0 usecs [ 23.950492] calling addr_init+0x0/0x6d @ 1 [ 23.950628] initcall addr_init+0x0/0x6d returned 0 after 0 usecs [ 23.950632] calling cma_init+0x0/0x108 @ 1 [ 23.950731] initcall cma_init+0x0/0x108 returned 0 after 0 usecs [ 23.950735] calling mthca_init+0x0/0x1a7 @ 1 [ 23.950837] bus: 'pci': add driver ib_mthca [ 23.951197] initcall mthca_init+0x0/0x1a7 returned 0 after 0 usecs [ 23.951201] calling infinipath_init+0x0/0xe9 @ 1 [ 23.951255] bus: 'pci': add driver ib_ipath [ 23.951511] initcall infinipath_init+0x0/0xe9 returned 0 after 0 usecs [ 23.951515] calling c2_init_module+0x0/0x42 @ 1 [ 23.951522] bus: 'pci': add driver c2 [ 23.951801] initcall c2_init_module+0x0/0x42 returned 0 after 0 usecs [ 23.951805] calling nes_init_module+0x0/0x17f @ 1 [ 23.952051] bus: 'pci': add driver iw_nes [ 23.952328] initcall nes_init_module+0x0/0x17f returned 0 after 0 usecs [ 23.952333] calling ipoib_init_module+0x0/0x12d @ 1 [ 23.952464] initcall ipoib_init_module+0x0/0x12d returned 0 after 0 usecs [ 23.952469] calling srp_init_module+0x0/0x116 @ 1 [ 23.952479] device class 'infiniband_srp': registering [ 23.952705] initcall srp_init_module+0x0/0x116 returned 0 after 0 usecs [ 23.952710] calling dcdrbu_init+0x0/0x169 @ 1 [ 23.952733] Registering platform device 'dell_rbu'. Parent at platform [ 23.952747] device: 'dell_rbu': device_add [ 23.952762] bus: 'platform': add device dell_rbu [ 23.953051] initcall dcdrbu_init+0x0/0x169 returned 0 after 0 usecs [ 23.953056] calling dcdbas_init+0x0/0x8d @ 1 [ 23.953063] bus: 'platform': add driver dcdbas [ 23.953284] Registering platform device 'dcdbas'. Parent at platform [ 23.953289] device: 'dcdbas': device_add [ 23.953300] bus: 'platform': add device dcdbas [ 23.953552] bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas [ 23.953556] bus: 'platform': really_probe: probing driver dcdbas with device dcdbas [ 23.953586] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 23.953590] driver: 'dcdbas': driver_bound: bound to device 'dcdbas' [ 23.953594] bus: 'platform': really_probe: bound device dcdbas to driver dcdbas [ 23.953602] initcall dcdbas_init+0x0/0x8d returned 0 after 0 usecs [ 23.953605] calling hifn_init+0x0/0x3e @ 1 [ 23.953607] HIFN supports only 32-bit addresses. [ 23.953611] initcall hifn_init+0x0/0x3e returned -22 after 0 usecs [ 23.953614] initcall hifn_init+0x0/0x3e returned with error code -22 [ 23.953618] calling ioat_init_module+0x0/0x42 @ 1 [ 23.953633] bus: 'pci': add driver ioatdma [ 23.953892] initcall ioat_init_module+0x0/0x42 returned 0 after 0 usecs [ 23.953897] calling hid_init+0x0/0x55 @ 1 [ 23.954173] bus: 'hid': registered [ 23.954177] initcall hid_init+0x0/0x55 returned 0 after 0 usecs [ 23.954183] calling apple_init+0x0/0x63 @ 1 [ 23.954187] bus: 'hid': add driver apple [ 23.954396] initcall apple_init+0x0/0x63 returned 0 after 0 usecs [ 23.954401] calling belkin_init+0x0/0x47 @ 1 [ 23.954404] bus: 'hid': add driver belkin [ 23.954648] initcall belkin_init+0x0/0x47 returned 0 after 0 usecs [ 23.954652] calling ch_init+0x0/0x47 @ 1 [ 23.954656] bus: 'hid': add driver cherry [ 23.954864] initcall ch_init+0x0/0x47 returned 0 after 0 usecs [ 23.954869] calling dr_init+0x0/0x42 @ 1 [ 23.954872] bus: 'hid': add driver dragonrise [ 23.955141] initcall dr_init+0x0/0x42 returned 0 after 0 usecs [ 23.955145] calling ez_init+0x0/0x47 @ 1 [ 23.955149] bus: 'hid': add driver ezkey [ 23.955368] initcall ez_init+0x0/0x47 returned 0 after 0 usecs [ 23.955372] calling gyration_init+0x0/0x47 @ 1 [ 23.955376] bus: 'hid': add driver gyration [ 23.955619] initcall gyration_init+0x0/0x47 returned 0 after 0 usecs [ 23.955623] calling ks_init+0x0/0x47 @ 1 [ 23.955627] bus: 'hid': add driver kensington [ 23.955837] initcall ks_init+0x0/0x47 returned 0 after 0 usecs [ 23.955841] calling lg_init+0x0/0x47 @ 1 [ 23.955845] bus: 'hid': add driver logitech [ 23.956087] initcall lg_init+0x0/0x47 returned 0 after 0 usecs [ 23.956092] calling ms_init+0x0/0x47 @ 1 [ 23.956096] bus: 'hid': add driver microsoft [ 23.956318] initcall ms_init+0x0/0x47 returned 0 after 0 usecs [ 23.956322] calling mr_init+0x0/0x47 @ 1 [ 23.956326] bus: 'hid': add driver monterey [ 23.956578] initcall mr_init+0x0/0x47 returned 0 after 0 usecs [ 23.956583] calling ntrig_init+0x0/0x47 @ 1 [ 23.956587] bus: 'hid': add driver ntrig [ 23.956808] initcall ntrig_init+0x0/0x47 returned 0 after 0 usecs [ 23.956812] calling sony_init+0x0/0x47 @ 1 [ 23.956816] bus: 'hid': add driver sony [ 23.957073] initcall sony_init+0x0/0x47 returned 0 after 0 usecs [ 23.957078] calling sp_init+0x0/0x47 @ 1 [ 23.957082] bus: 'hid': add driver sunplus [ 23.957292] initcall sp_init+0x0/0x47 returned 0 after 0 usecs [ 23.957296] calling tm_init+0x0/0x47 @ 1 [ 23.957300] bus: 'hid': add driver thrustmaster [ 23.957577] initcall tm_init+0x0/0x47 returned 0 after 0 usecs [ 23.957581] calling ts_init+0x0/0x47 @ 1 [ 23.957585] bus: 'hid': add driver topseed [ 23.957793] initcall ts_init+0x0/0x47 returned 0 after 0 usecs [ 23.957798] calling zp_init+0x0/0x47 @ 1 [ 23.957801] bus: 'hid': add driver zeroplus [ 23.958064] initcall zp_init+0x0/0x47 returned 0 after 0 usecs [ 23.958068] calling wacom_init+0x0/0x71 @ 1 [ 23.958072] bus: 'hid': add driver wacom [ 23.958278] wacom driver registered [ 23.958283] initcall wacom_init+0x0/0x71 returned 0 after 0 usecs [ 23.958288] calling hid_init+0x0/0xf1 @ 1 [ 23.958419] bus: 'hid': add driver generic-usb [ 23.958688] bus: 'usb': add driver hiddev [ 23.958943] usbcore: registered new interface driver hiddev [ 23.958963] bus: 'usb': add driver usbhid [ 23.959171] usbcore: registered new interface driver usbhid [ 23.959177] usbhid: v2.6:USB HID core driver [ 23.959183] initcall hid_init+0x0/0xf1 returned 0 after 0 usecs [ 23.959187] calling usb_mouse_init+0x0/0x5e @ 1 [ 23.959192] bus: 'usb': add driver usbmouse [ 23.959444] usbcore: registered new interface driver usbmouse [ 23.959451] usbmouse: v1.6:USB HID Boot Protocol mouse driver [ 23.959456] initcall usb_mouse_init+0x0/0x5e returned 0 after 0 usecs [ 23.959460] calling virtio_pci_init+0x0/0x7b @ 1 [ 23.959471] device: 'virtio-pci': device_add [ 23.959505] bus: 'pci': add driver virtio-pci [ 23.959766] initcall virtio_pci_init+0x0/0x7b returned 0 after 0 usecs [ 23.959770] calling dell_init+0x0/0x32 @ 1 [ 23.959774] initcall dell_init+0x0/0x32 returned -19 after 0 usecs [ 23.959778] calling init_soundcore+0x0/0xa5 @ 1 [ 23.959791] device class 'sound': registering [ 23.960111] initcall init_soundcore+0x0/0xa5 returned 0 after 9765 usecs [ 23.960116] calling alsa_sound_init+0x0/0xba @ 1 [ 23.960281] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 23.960287] initcall alsa_sound_init+0x0/0xba returned 0 after 0 usecs [ 23.960291] calling alsa_hwdep_init+0x0/0x8a @ 1 [ 23.960343] initcall alsa_hwdep_init+0x0/0x8a returned 0 after 0 usecs [ 23.960348] calling alsa_timer_init+0x0/0x1a6 @ 1 [ 23.960405] device: 'timer': device_add [ 23.960715] initcall alsa_timer_init+0x0/0x1a6 returned 0 after 0 usecs [ 23.960720] calling rtctimer_init+0x0/0x148 @ 1 [ 23.960728] initcall rtctimer_init+0x0/0x148 returned 0 after 0 usecs [ 23.960732] calling alsa_pcm_init+0x0/0x92 @ 1 [ 23.960749] initcall alsa_pcm_init+0x0/0x92 returned 0 after 0 usecs [ 23.960753] calling snd_mem_init+0x0/0x53 @ 1 [ 23.960767] initcall snd_mem_init+0x0/0x53 returned 0 after 0 usecs [ 23.960771] calling alsa_rawmidi_init+0x0/0xcb @ 1 [ 23.960778] initcall alsa_rawmidi_init+0x0/0xcb returned 0 after 0 usecs [ 23.960782] calling alsa_mixer_oss_init+0x0/0x63 @ 1 [ 23.960787] initcall alsa_mixer_oss_init+0x0/0x63 returned 0 after 0 usecs [ 23.960791] calling alsa_pcm_oss_init+0x0/0xc8 @ 1 [ 23.960809] initcall alsa_pcm_oss_init+0x0/0xc8 returned 0 after 0 usecs [ 23.960813] calling alsa_akm4xxx_module_init+0x0/0x2d @ 1 [ 23.960818] initcall alsa_akm4xxx_module_init+0x0/0x2d returned 0 after 0 usecs [ 23.960822] calling alsa_tea575x_module_init+0x0/0x2d @ 1 [ 23.960827] initcall alsa_tea575x_module_init+0x0/0x2d returned 0 after 0 usecs [ 23.960831] calling alsa_i2c_init+0x0/0x2d @ 1 [ 23.960835] initcall alsa_i2c_init+0x0/0x2d returned 0 after 0 usecs [ 23.960839] calling alsa_opl3_init+0x0/0x2d @ 1 [ 23.960843] initcall alsa_opl3_init+0x0/0x2d returned 0 after 0 usecs [ 23.960848] calling alsa_mpu401_uart_init+0x0/0x2d @ 1 [ 23.960852] initcall alsa_mpu401_uart_init+0x0/0x2d returned 0 after 0 usecs [ 23.960856] calling alsa_sb_common_init+0x0/0x2d @ 1 [ 23.960860] initcall alsa_sb_common_init+0x0/0x2d returned 0 after 0 usecs [ 23.960865] calling alsa_sb16_init+0x0/0x2d @ 1 [ 23.960869] initcall alsa_sb16_init+0x0/0x2d returned 0 after 0 usecs [ 23.960873] calling alsa_ad1889_init+0x0/0x42 @ 1 [ 23.960890] bus: 'pci': add driver AD1889 Audio [ 23.961234] initcall alsa_ad1889_init+0x0/0x42 returned 0 after 0 usecs [ 23.961238] calling alsa_card_als4000_init+0x0/0x42 @ 1 [ 23.961247] bus: 'pci': add driver ALS4000 [ 23.961481] initcall alsa_card_als4000_init+0x0/0x42 returned 0 after 0 usecs [ 23.961486] calling alsa_card_atiixp_init+0x0/0x42 @ 1 [ 23.961493] bus: 'pci': add driver ATI IXP MC97 controller [ 23.961757] initcall alsa_card_atiixp_init+0x0/0x42 returned 0 after 0 usecs [ 23.961762] calling alsa_card_bt87x_init+0x0/0x56 @ 1 [ 23.961770] bus: 'pci': add driver Bt87x [ 23.962006] initcall alsa_card_bt87x_init+0x0/0x56 returned 0 after 0 usecs [ 23.962011] calling alsa_card_cmipci_init+0x0/0x42 @ 1 [ 23.962019] bus: 'pci': add driver C-Media PCI [ 23.962307] initcall alsa_card_cmipci_init+0x0/0x42 returned 0 after 0 usecs [ 23.962312] calling alsa_card_cs5530_init+0x0/0x42 @ 1 [ 23.962319] bus: 'pci': add driver CS5530_Audio [ 23.962555] initcall alsa_card_cs5530_init+0x0/0x42 returned 0 after 0 usecs [ 23.962560] calling alsa_card_es1968_init+0x0/0x42 @ 1 [ 23.962568] bus: 'pci': add driver ES1968 (ESS Maestro) [ 23.962857] initcall alsa_card_es1968_init+0x0/0x42 returned 0 after 0 usecs [ 23.962862] calling alsa_card_fm801_init+0x0/0x42 @ 1 [ 23.962870] bus: 'pci': add driver FM801 [ 23.963108] initcall alsa_card_fm801_init+0x0/0x42 returned 0 after 0 usecs [ 23.963113] calling alsa_card_intel8x0_init+0x0/0x42 @ 1 [ 23.963121] bus: 'pci': add driver Intel ICH [ 23.963143] bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver Intel ICH [ 23.963147] bus: 'pci': really_probe: probing driver Intel ICH with device 0000:00:04.0 [ 23.963382] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 23.963392] Intel ICH 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3 [ 23.963441] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 24.300018] intel8x0_measure_ac97_clock: measured 60000 usecs (2936 samples) [ 24.300021] intel8x0: clocking to 47084 [ 24.300053] device: 'pcmC0D2p': device_add [ 24.300473] device: 'pcmC0D1c': device_add [ 24.300774] device: 'adsp': device_add [ 24.301033] device: 'pcmC0D0p': device_add [ 24.301292] device: 'pcmC0D0c': device_add [ 24.301538] device: 'dsp': device_add [ 24.301809] device: 'audio': device_add [ 24.302081] device: '0-0:ALC850': device_add [ 24.302101] bus: 'ac97': add device 0-0:ALC850 [ 24.302361] device: 'controlC0': device_add [ 24.302664] device: 'mixer': device_add [ 24.303581] driver: '0000:00:04.0': driver_bound: bound to device 'Intel ICH' [ 24.303588] bus: 'pci': really_probe: bound device 0000:00:04.0 to driver Intel ICH [ 24.303833] initcall alsa_card_intel8x0_init+0x0/0x42 returned 0 after 332031 usecs [ 24.303839] calling alsa_card_m3_init+0x0/0x42 @ 1 [ 24.303862] bus: 'pci': add driver Maestro3 [ 24.304185] initcall alsa_card_m3_init+0x0/0x42 returned 0 after 0 usecs [ 24.304190] calling alsa_card_rme96_init+0x0/0x42 @ 1 [ 24.304198] bus: 'pci': add driver RME Digi96 [ 24.304433] initcall alsa_card_rme96_init+0x0/0x42 returned 0 after 0 usecs [ 24.304438] calling alsa_card_via82xx_init+0x0/0x42 @ 1 [ 24.304445] bus: 'pci': add driver VIA 82xx Audio [ 24.304713] initcall alsa_card_via82xx_init+0x0/0x42 returned 0 after 0 usecs [ 24.304718] calling alsa_card_via82xx_init+0x0/0x42 @ 1 [ 24.304726] bus: 'pci': add driver VIA 82xx Modem [ 24.304961] initcall alsa_card_via82xx_init+0x0/0x42 returned 0 after 0 usecs [ 24.304966] calling alsa_ac97_init+0x0/0x2d @ 1 [ 24.304970] initcall alsa_ac97_init+0x0/0x2d returned 0 after 0 usecs [ 24.304974] calling alsa_card_ali_init+0x0/0x42 @ 1 [ 24.304982] bus: 'pci': add driver ALI 5451 [ 24.305259] initcall alsa_card_ali_init+0x0/0x42 returned 0 after 0 usecs [ 24.305264] calling alsa_card_vortex_init+0x0/0x42 @ 1 [ 24.305272] bus: 'pci': add driver au8810 [ 24.305507] initcall alsa_card_vortex_init+0x0/0x42 returned 0 after 0 usecs [ 24.305512] calling alsa_card_vortex_init+0x0/0x42 @ 1 [ 24.305520] bus: 'pci': add driver au8830 [ 24.305803] initcall alsa_card_vortex_init+0x0/0x42 returned 0 after 0 usecs [ 24.305808] calling ct_card_init+0x0/0x42 @ 1 [ 24.305815] bus: 'pci': add driver SB-XFi [ 24.306052] initcall ct_card_init+0x0/0x42 returned 0 after 0 usecs [ 24.306057] calling alsa_card_ca0106_init+0x0/0x42 @ 1 [ 24.306065] bus: 'pci': add driver CA0106 [ 24.306334] initcall alsa_card_ca0106_init+0x0/0x42 returned 0 after 0 usecs [ 24.306339] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.306347] bus: 'pci': add driver Echoaudio Darla20 [ 24.306604] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.306609] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.306617] bus: 'pci': add driver Echoaudio Gina20 [ 24.306902] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.306906] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.306915] bus: 'pci': add driver Echoaudio Darla24 [ 24.307150] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.307155] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.307163] bus: 'pci': add driver Echoaudio Layla24 [ 24.307453] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.307458] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.307466] bus: 'pci': add driver Echoaudio Mia [ 24.307724] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.307729] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.307738] bus: 'pci': add driver Echoaudio Echo3G [ 24.308010] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.308015] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.308023] bus: 'pci': add driver Echoaudio Indigo DJ [ 24.308256] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.308261] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.308269] bus: 'pci': add driver Echoaudio Indigo IOx [ 24.308524] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.308529] calling alsa_card_echo_init+0x0/0x42 @ 1 [ 24.308537] bus: 'pci': add driver Echoaudio Indigo DJx [ 24.308787] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs [ 24.308792] calling alsa_card_emu10k1_init+0x0/0x42 @ 1 [ 24.308801] bus: 'pci': add driver EMU10K1_Audigy [ 24.309089] initcall alsa_card_emu10k1_init+0x0/0x42 returned 0 after 0 usecs [ 24.309094] calling alsa_card_emu10k1x_init+0x0/0x42 @ 1 [ 24.309103] bus: 'pci': add driver EMU10K1X [ 24.309341] initcall alsa_card_emu10k1x_init+0x0/0x42 returned 0 after 0 usecs [ 24.309346] calling patch_cmedia_init+0x0/0x39 @ 1 [ 24.309418] initcall patch_cmedia_init+0x0/0x39 returned 0 after 0 usecs [ 24.309423] calling patch_sigmatel_init+0x0/0x39 @ 1 [ 24.309428] initcall patch_sigmatel_init+0x0/0x39 returned 0 after 0 usecs [ 24.309432] calling patch_ca0110_init+0x0/0x39 @ 1 [ 24.309437] initcall patch_ca0110_init+0x0/0x39 returned 0 after 0 usecs [ 24.309441] calling patch_nvhdmi_init+0x0/0x39 @ 1 [ 24.309446] initcall patch_nvhdmi_init+0x0/0x39 returned 0 after 0 usecs [ 24.309450] calling patch_intelhdmi_init+0x0/0x39 @ 1 [ 24.309455] initcall patch_intelhdmi_init+0x0/0x39 returned 0 after 0 usecs [ 24.309460] calling alsa_card_azx_init+0x0/0x42 @ 1 [ 24.309471] bus: 'pci': add driver HDA Intel [ 24.309769] initcall alsa_card_azx_init+0x0/0x42 returned 0 after 0 usecs [ 24.309774] calling alsa_card_ice1724_init+0x0/0x42 @ 1 [ 24.309782] bus: 'pci': add driver ICE1724 [ 24.310063] initcall alsa_card_ice1724_init+0x0/0x42 returned 0 after 9765 usecs [ 24.310069] calling alsa_ice1712_akm4xxx_module_init+0x0/0x2d @ 1 [ 24.310073] initcall alsa_ice1712_akm4xxx_module_init+0x0/0x2d returned 0 after 0 usecs [ 24.310078] calling alsa_card_mixart_init+0x0/0x42 @ 1 [ 24.310088] bus: 'pci': add driver Digigram miXart [ 24.310380] initcall alsa_card_mixart_init+0x0/0x42 returned 0 after 0 usecs [ 24.310385] calling alsa_card_nm256_init+0x0/0x42 @ 1 [ 24.310394] bus: 'pci': add driver NeoMagic 256 [ 24.310670] initcall alsa_card_nm256_init+0x0/0x42 returned 0 after 0 usecs [ 24.310675] calling alsa_card_hifier_init+0x0/0x42 @ 1 [ 24.310683] bus: 'pci': add driver CMI8787HiFier [ 24.310957] initcall alsa_card_hifier_init+0x0/0x42 returned 0 after 0 usecs [ 24.310962] calling alsa_card_oxygen_init+0x0/0x42 @ 1 [ 24.310971] bus: 'pci': add driver CMI8788 [ 24.311221] initcall alsa_card_oxygen_init+0x0/0x42 returned 0 after 0 usecs [ 24.311226] calling alsa_card_xonar_init+0x0/0x42 @ 1 [ 24.311235] bus: 'pci': add driver AV200 [ 24.311518] initcall alsa_card_xonar_init+0x0/0x42 returned 0 after 0 usecs [ 24.311523] calling pcxhr_module_init+0x0/0x42 @ 1 [ 24.311532] bus: 'pci': add driver Digigram pcxhr [ 24.311772] initcall pcxhr_module_init+0x0/0x42 returned 0 after 0 usecs [ 24.311777] calling alsa_card_riptide_init+0x0/0x77 @ 1 [ 24.311785] bus: 'pci': add driver RIPTIDE [ 24.312071] bus: 'pci': add driver Riptide Joystick [ 24.312319] initcall alsa_card_riptide_init+0x0/0x77 returned 0 after 0 usecs [ 24.312325] calling alsa_card_hammerfall_init+0x0/0x42 @ 1 [ 24.312334] bus: 'pci': add driver RME Digi9652 (Hammerfall) [ 24.312618] initcall alsa_card_hammerfall_init+0x0/0x42 returned 0 after 0 usecs [ 24.312623] calling alsa_card_hdsp_init+0x0/0x42 @ 1 [ 24.312632] bus: 'pci': add driver RME Hammerfall DSP [ 24.312897] initcall alsa_card_hdsp_init+0x0/0x42 returned 0 after 0 usecs [ 24.312902] calling alsa_card_hdspm_init+0x0/0x42 @ 1 [ 24.312911] bus: 'pci': add driver RME Hammerfall DSP MADI [ 24.313186] initcall alsa_card_hdspm_init+0x0/0x42 returned 0 after 0 usecs [ 24.313191] calling alsa_card_trident_init+0x0/0x42 @ 1 [ 24.313200] bus: 'pci': add driver Trident4DWaveAudio [ 24.313440] initcall alsa_card_trident_init+0x0/0x42 returned 0 after 0 usecs [ 24.313445] calling alsa_card_ymfpci_init+0x0/0x42 @ 1 [ 24.313453] bus: 'pci': add driver Yamaha DS-1 PCI [ 24.313736] initcall alsa_card_ymfpci_init+0x0/0x42 returned 0 after 0 usecs [ 24.313741] calling alsa_util_mem_init+0x0/0x2d @ 1 [ 24.313746] initcall alsa_util_mem_init+0x0/0x2d returned 0 after 0 usecs [ 24.313750] calling snd_usX2Y_module_init+0x0/0x42 @ 1 [ 24.313763] bus: 'usb': add driver snd-usb-usx2y [ 24.313995] usbcore: registered new interface driver snd-usb-usx2y [ 24.314005] initcall snd_usX2Y_module_init+0x0/0x42 returned 0 after 0 usecs [ 24.314009] calling snd_module_init+0x0/0x42 @ 1 [ 24.314015] bus: 'usb': add driver snd-usb-caiaq [ 24.314261] usbcore: registered new interface driver snd-usb-caiaq [ 24.314270] initcall snd_module_init+0x0/0x42 returned 0 after 0 usecs [ 24.314274] calling snd_soc_init+0x0/0x74 @ 1 [ 24.314297] bus: 'platform': add driver soc-audio [ 24.314533] initcall snd_soc_init+0x0/0x74 returned 0 after 0 usecs [ 24.314538] calling ad73311_init+0x0/0x39 @ 1 [ 24.314541] No device for DAI AD73311 [ 24.314608] initcall ad73311_init+0x0/0x39 returned 0 after 0 usecs [ 24.314613] calling ak4104_init+0x0/0x45 @ 1 [ 24.314615] Asahi Kasei AK4104 ALSA SoC Codec Driver [ 24.314621] bus: 'spi': add driver ak4104 [ 24.314881] initcall ak4104_init+0x0/0x45 returned 0 after 0 usecs [ 24.314886] calling ak4535_modinit+0x0/0x39 @ 1 [ 24.314889] No device for DAI AK4535 [ 24.314893] initcall ak4535_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.314898] calling cs4270_init+0x0/0x47 @ 1 [ 24.314900] Cirrus Logic CS4270 ALSA SoC Codec Driver [ 24.314906] bus: 'i2c': add driver cs4270 [ 24.315144] initcall cs4270_init+0x0/0x47 returned 0 after 0 usecs [ 24.315149] calling pcm3008_init+0x0/0x39 @ 1 [ 24.315151] No device for DAI PCM3008 HiFi [ 24.315156] initcall pcm3008_init+0x0/0x39 returned 0 after 0 usecs [ 24.315161] calling dit_modinit+0x0/0x39 @ 1 [ 24.315166] bus: 'platform': add driver spdif-dit [ 24.315416] initcall dit_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.315421] calling ssm2602_modinit+0x0/0x39 @ 1 [ 24.315424] No device for DAI SSM2602 [ 24.315428] initcall ssm2602_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.315433] calling tlv320aic23_modinit+0x0/0x39 @ 1 [ 24.315436] No device for DAI tlv320aic23 [ 24.315440] initcall tlv320aic23_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.315445] calling aic26_init+0x0/0x39 @ 1 [ 24.315449] bus: 'spi': add driver tlv320aic26 [ 24.315695] initcall aic26_init+0x0/0x39 returned 0 after 0 usecs [ 24.315699] calling aic3x_modinit+0x0/0x39 @ 1 [ 24.315702] No device for DAI tlv320aic3x [ 24.315707] initcall aic3x_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.315711] calling twl4030_modinit+0x0/0x3e @ 1 [ 24.315714] No device for DAI twl4030 [ 24.315717] No device for DAI twl4030 Voice [ 24.315721] initcall twl4030_modinit+0x0/0x3e returned 0 after 0 usecs [ 24.315726] calling uda134x_init+0x0/0x39 @ 1 [ 24.315728] No device for DAI UDA134X [ 24.315733] initcall uda134x_init+0x0/0x39 returned 0 after 0 usecs [ 24.315737] calling uda1380_modinit+0x0/0x3e @ 1 [ 24.315740] No device for DAI UDA1380 [ 24.315743] No device for DAI UDA1380 [ 24.315745] No device for DAI UDA1380 [ 24.315750] initcall uda1380_modinit+0x0/0x3e returned 0 after 0 usecs [ 24.315754] calling wm8510_modinit+0x0/0x39 @ 1 [ 24.315757] No device for DAI WM8510 HiFi [ 24.315761] initcall wm8510_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.315766] calling wm8580_modinit+0x0/0x51 @ 1 [ 24.315770] bus: 'i2c': add driver wm8580 [ 24.316018] initcall wm8580_modinit+0x0/0x51 returned 0 after 0 usecs [ 24.316023] calling wm8728_modinit+0x0/0x39 @ 1 [ 24.316026] No device for DAI WM8728 [ 24.316030] initcall wm8728_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.316035] calling wm8731_modinit+0x0/0x71 @ 1 [ 24.316039] bus: 'i2c': add driver WM8731 I2C Codec [ 24.316263] bus: 'spi': add driver wm8731 [ 24.316507] initcall wm8731_modinit+0x0/0x71 returned 0 after 0 usecs [ 24.316513] calling wm8750_modinit+0x0/0x39 @ 1 [ 24.316515] No device for DAI WM8750 [ 24.316520] initcall wm8750_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.316524] calling wm8753_modinit+0x0/0x71 @ 1 [ 24.316529] bus: 'i2c': add driver wm8753 [ 24.316750] bus: 'spi': add driver wm8753 [ 24.316995] initcall wm8753_modinit+0x0/0x71 returned 0 after 0 usecs [ 24.317001] calling wm8900_modinit+0x0/0x3b @ 1 [ 24.317005] bus: 'i2c': add driver WM8900 [ 24.317240] initcall wm8900_modinit+0x0/0x3b returned 0 after 0 usecs [ 24.317245] calling wm8903_modinit+0x0/0x3b @ 1 [ 24.317249] bus: 'i2c': add driver WM8903 [ 24.317495] initcall wm8903_modinit+0x0/0x3b returned 0 after 0 usecs [ 24.317500] calling wm8971_modinit+0x0/0x39 @ 1 [ 24.317503] No device for DAI WM8971 [ 24.317508] initcall wm8971_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.317512] calling wm8940_modinit+0x0/0x59 @ 1 [ 24.317517] bus: 'i2c': add driver WM8940 I2C Codec [ 24.317733] initcall wm8940_modinit+0x0/0x59 returned 0 after 0 usecs [ 24.317738] calling wm8960_modinit+0x0/0x59 @ 1 [ 24.317742] bus: 'i2c': add driver WM8960 I2C Codec [ 24.318009] initcall wm8960_modinit+0x0/0x59 returned 0 after 0 usecs [ 24.318013] calling wm8988_modinit+0x0/0x79 @ 1 [ 24.318018] bus: 'i2c': add driver WM8988 [ 24.318231] bus: 'spi': add driver wm8988 [ 24.318499] initcall wm8988_modinit+0x0/0x79 returned 0 after 0 usecs [ 24.318504] calling wm8990_modinit+0x0/0x39 @ 1 [ 24.318506] No device for DAI WM8990 ADC/DAC Primary [ 24.318512] initcall wm8990_modinit+0x0/0x39 returned 0 after 0 usecs [ 24.318516] calling wm9081_modinit+0x0/0x59 @ 1 [ 24.318520] bus: 'i2c': add driver wm9081 [ 24.318734] initcall wm9081_modinit+0x0/0x59 returned 0 after 0 usecs [ 24.318739] calling alsa_sound_last_init+0x0/0x93 @ 1 [ 24.318742] ALSA device list: [ 24.318744] #0: NVidia CK804 with ALC850 at irq 3 [ 24.318749] initcall alsa_sound_last_init+0x0/0x93 returned 0 after 0 usecs [ 24.318754] calling flow_cache_init+0x0/0x1c9 @ 1 [ 24.319248] initcall flow_cache_init+0x0/0x1c9 returned 0 after 0 usecs [ 24.319252] calling llc_init+0x0/0x47 @ 1 [ 24.319258] initcall llc_init+0x0/0x47 returned 0 after 0 usecs [ 24.319262] calling snap_init+0x0/0x61 @ 1 [ 24.319332] initcall snap_init+0x0/0x61 returned 0 after 0 usecs [ 24.319336] calling sysctl_ipv4_init+0x0/0x74 @ 1 [ 24.321697] initcall sysctl_ipv4_init+0x0/0x74 returned 0 after 9765 usecs [ 24.321702] calling ipip_init+0x0/0x95 @ 1 [ 24.321704] IPv4 over IPv4 tunneling driver [ 24.321802] device: 'tunl0': device_add [ 24.327530] initcall ipip_init+0x0/0x95 returned 0 after 0 usecs [ 24.327535] calling ipgre_init+0x0/0xd7 @ 1 [ 24.327537] GRE over IPv4 tunneling driver [ 24.327572] device: 'gre0': device_add [ 24.328830] initcall ipgre_init+0x0/0xd7 returned 0 after 0 usecs [ 24.328834] calling ah4_init+0x0/0x8f @ 1 [ 24.328839] initcall ah4_init+0x0/0x8f returned 0 after 0 usecs [ 24.328842] calling ipcomp4_init+0x0/0x8f @ 1 [ 24.328846] initcall ipcomp4_init+0x0/0x8f returned 0 after 0 usecs [ 24.328850] calling ipip_init+0x0/0xc5 @ 1 [ 24.328855] initcall ipip_init+0x0/0xc5 returned 0 after 0 usecs [ 24.328859] calling tunnel4_init+0x0/0x8f @ 1 [ 24.328863] initcall tunnel4_init+0x0/0x8f returned 0 after 0 usecs [ 24.328866] calling xfrm4_mode_tunnel_init+0x0/0x3e @ 1 [ 24.328870] initcall xfrm4_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs [ 24.328874] calling tcp_westwood_register+0x0/0x39 @ 1 [ 24.328878] TCP westwood registered [ 24.328881] initcall tcp_westwood_register+0x0/0x39 returned 0 after 0 usecs [ 24.328884] calling hstcp_register+0x0/0x39 @ 1 [ 24.328887] TCP highspeed registered [ 24.328890] initcall hstcp_register+0x0/0x39 returned 0 after 0 usecs [ 24.328894] calling hybla_register+0x0/0x39 @ 1 [ 24.328896] TCP hybla registered [ 24.328899] initcall hybla_register+0x0/0x39 returned 0 after 0 usecs [ 24.328902] calling htcp_register+0x0/0x39 @ 1 [ 24.328905] TCP htcp registered [ 24.328908] initcall htcp_register+0x0/0x39 returned 0 after 0 usecs [ 24.328911] calling tcp_vegas_register+0x0/0x3b @ 1 [ 24.328914] TCP vegas registered [ 24.328917] initcall tcp_vegas_register+0x0/0x3b returned 0 after 0 usecs [ 24.328921] calling tcp_veno_register+0x0/0x3b @ 1 [ 24.328923] TCP veno registered [ 24.328926] initcall tcp_veno_register+0x0/0x3b returned 0 after 0 usecs [ 24.328930] calling tcp_scalable_register+0x0/0x39 @ 1 [ 24.328932] TCP scalable registered [ 24.328936] initcall tcp_scalable_register+0x0/0x39 returned 0 after 0 usecs [ 24.328939] calling tcp_yeah_register+0x0/0x3b @ 1 [ 24.328942] TCP yeah registered [ 24.328945] initcall tcp_yeah_register+0x0/0x3b returned 0 after 0 usecs [ 24.328948] calling inet6_init+0x0/0x2ec @ 1 [ 24.331725] NET: Registered protocol family 10 [ 24.335890] lo: Disabled Privacy Extensions [ 24.344751] tunl0: Disabled Privacy Extensions [ 24.348036] initcall inet6_init+0x0/0x2ec returned 0 after 19531 usecs [ 24.348041] calling ah6_init+0x0/0x8f @ 1 [ 24.348047] initcall ah6_init+0x0/0x8f returned 0 after 0 usecs [ 24.348051] calling xfrm6_mode_tunnel_init+0x0/0x3e @ 1 [ 24.348056] initcall xfrm6_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs [ 24.348059] calling xfrm6_ro_init+0x0/0x3e @ 1 [ 24.348063] initcall xfrm6_ro_init+0x0/0x3e returned 0 after 0 usecs [ 24.348067] calling xfrm6_beet_init+0x0/0x3e @ 1 [ 24.348071] initcall xfrm6_beet_init+0x0/0x3e returned 0 after 0 usecs [ 24.348075] calling mip6_init+0x0/0xe1 @ 1 [ 24.348077] Mobile IPv6 [ 24.348081] initcall mip6_init+0x0/0xe1 returned 0 after 0 usecs [ 24.348085] calling sit_init+0x0/0x95 @ 1 [ 24.348087] IPv6 over IPv4 tunneling driver [ 24.348136] device: 'sit0': device_add [ 24.350627] sit0: Disabled Privacy Extensions [ 24.352082] initcall sit_init+0x0/0x95 returned 0 after 9765 usecs [ 24.352087] calling packet_init+0x0/0x6d @ 1 [ 24.352092] NET: Registered protocol family 17 [ 24.352176] initcall packet_init+0x0/0x6d returned 0 after 0 usecs [ 24.352180] calling ipsec_pfkey_init+0x0/0xac @ 1 [ 24.352184] NET: Registered protocol family 15 [ 24.352215] initcall ipsec_pfkey_init+0x0/0xac returned 0 after 0 usecs [ 24.352219] calling br_init+0x0/0xd3 @ 1 [ 24.352818] initcall br_init+0x0/0xd3 returned 0 after 0 usecs [ 24.352822] calling dsa_init_module+0x0/0x3b @ 1 [ 24.352827] initcall dsa_init_module+0x0/0x3b returned 0 after 0 usecs [ 24.352831] calling edsa_init_module+0x0/0x3b @ 1 [ 24.352835] initcall edsa_init_module+0x0/0x3b returned 0 after 0 usecs [ 24.352839] calling mv88e6123_61_65_init+0x0/0x3b @ 1 [ 24.352855] initcall mv88e6123_61_65_init+0x0/0x3b returned 0 after 0 usecs [ 24.352859] calling mv88e6131_init+0x0/0x3b @ 1 [ 24.352863] initcall mv88e6131_init+0x0/0x3b returned 0 after 0 usecs [ 24.352867] calling dsa_init_module+0x0/0x39 @ 1 [ 24.352876] bus: 'platform': add driver dsa [ 24.353117] initcall dsa_init_module+0x0/0x39 returned 0 after 0 usecs [ 24.353122] calling atalk_init+0x0/0xb3 @ 1 [ 24.353126] NET: Registered protocol family 5 [ 24.390282] initcall atalk_init+0x0/0xb3 returned 0 after 39062 usecs [ 24.390287] calling x25_init+0x0/0x85 @ 1 [ 24.390291] NET: Registered protocol family 9 [ 24.390295] X.25 for Linux Version 0.2 [ 24.390526] initcall x25_init+0x0/0x85 returned 0 after 0 usecs [ 24.390531] calling nr_proto_init+0x0/0x273 @ 1 [ 24.390555] device: 'nr0': device_add [ 24.392441] device: 'nr1': device_add [ 24.394139] device: 'nr2': device_add [ 24.395896] device: 'nr3': device_add [ 24.397650] NET: Registered protocol family 6 [ 24.398156] initcall nr_proto_init+0x0/0x273 returned 0 after 0 usecs [ 24.398160] calling ax25_init+0x0/0xd3 @ 1 [ 24.398164] NET: Registered protocol family 3 [ 24.398243] initcall ax25_init+0x0/0xd3 returned 0 after 0 usecs [ 24.398247] calling can_init+0x0/0x141 @ 1 [ 24.398249] can: controller area network core (rev 20090105 abi 8) [ 24.398897] NET: Registered protocol family 29 [ 24.398908] initcall can_init+0x0/0x141 returned 0 after 0 usecs [ 24.398913] calling irnet_init+0x0/0x42 @ 1 [ 24.398977] device: 'irnet': device_add [ 24.399238] initcall irnet_init+0x0/0x42 returned 0 after 0 usecs [ 24.399242] calling l2cap_init+0x0/0x10a @ 1 [ 24.399271] Bluetooth: L2CAP ver 2.13 [ 24.399273] Bluetooth: L2CAP socket layer initialized [ 24.399277] initcall l2cap_init+0x0/0x10a returned 0 after 0 usecs [ 24.399282] calling hidp_init+0x0/0x81 @ 1 [ 24.399285] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 24.399291] bus: 'hid': add driver generic-bluetooth [ 24.399550] initcall hidp_init+0x0/0x81 returned 0 after 0 usecs [ 24.399554] calling decnet_init+0x0/0xaf @ 1 [ 24.399557] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 24.401727] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes [ 24.401798] NET: Registered protocol family 12 [ 24.402221] initcall decnet_init+0x0/0xaf returned 0 after 9765 usecs [ 24.402226] calling econet_proto_init+0x0/0x1fb @ 1 [ 24.402230] NET: Registered protocol family 19 [ 24.402371] initcall econet_proto_init+0x0/0x1fb returned 0 after 0 usecs [ 24.402376] calling phonet_init+0x0/0x9e @ 1 [ 24.402393] NET: Registered protocol family 35 [ 24.403082] initcall phonet_init+0x0/0x9e returned 0 after 0 usecs [ 24.403087] calling pep_register+0x0/0x3e @ 1 [ 24.403519] initcall pep_register+0x0/0x3e returned 0 after 0 usecs [ 24.403523] calling vlan_proto_init+0x0/0xeb @ 1 [ 24.403527] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> [ 24.403530] All bugs added by David S. Miller <[email protected]> [ 24.403596] initcall vlan_proto_init+0x0/0xeb returned 0 after 0 usecs [ 24.403601] calling sctp_init+0x0/0x82d @ 1 [ 24.406583] SCTP: Hash tables configured (established 18724 bind 18724) [ 24.408512] sctp_init_sock(sk: ffff88003cb08000) [ 24.408611] initcall sctp_init+0x0/0x82d returned 0 after 0 usecs [ 24.408616] calling lib80211_init+0x0/0x45 @ 1 [ 24.408618] lib80211: common routines for IEEE802.11 drivers [ 24.408634] lib80211_crypt: registered algorithm 'NULL' [ 24.408638] initcall lib80211_init+0x0/0x45 returned 0 after 0 usecs [ 24.408642] calling lib80211_crypto_wep_init+0x0/0x39 @ 1 [ 24.408646] lib80211_crypt: registered algorithm 'WEP' [ 24.408650] initcall lib80211_crypto_wep_init+0x0/0x39 returned 0 after 0 usecs [ 24.408654] calling lib80211_crypto_ccmp_init+0x0/0x39 @ 1 [ 24.408657] lib80211_crypt: registered algorithm 'CCMP' [ 24.408661] initcall lib80211_crypto_ccmp_init+0x0/0x39 returned 0 after 0 usecs [ 24.408665] calling lib80211_crypto_tkip_init+0x0/0x39 @ 1 [ 24.408668] lib80211_crypt: registered algorithm 'TKIP' [ 24.408672] initcall lib80211_crypto_tkip_init+0x0/0x39 returned 0 after 0 usecs [ 24.408676] calling tipc_init+0x0/0xdf @ 1 [ 24.408692] TIPC: Activated (version 1.6.4 compiled Aug 2 2009 22:49:36) [ 24.411036] NET: Registered protocol family 30 [ 24.411040] TIPC: Started in single node mode [ 24.411049] initcall tipc_init+0x0/0xdf returned 0 after 9765 usecs [ 24.411054] calling dcbnl_init+0x0/0x59 @ 1 [ 24.411059] initcall dcbnl_init+0x0/0x59 returned 0 after 0 usecs [ 24.411063] calling wimax_subsys_init+0x0/0x25a @ 1 [ 24.430153] initcall wimax_subsys_init+0x0/0x25a returned 0 after 19531 usecs [ 24.430158] calling severities_debugfs_init+0x0/0x83 @ 1 [ 24.430184] initcall severities_debugfs_init+0x0/0x83 returned 0 after 0 usecs [ 24.430188] calling cpufreq_p4_init+0x0/0x82 @ 1 [ 24.430192] initcall cpufreq_p4_init+0x0/0x82 returned -19 after 0 usecs [ 24.430196] calling update_mp_table+0x0/0x689 @ 1 [ 24.430200] initcall update_mp_table+0x0/0x689 returned 0 after 0 usecs [ 24.430204] calling lapic_insert_resource+0x0/0x67 @ 1 [ 24.430211] initcall lapic_insert_resource+0x0/0x67 returned 0 after 0 usecs [ 24.430215] calling io_apic_bug_finalize+0x0/0x42 @ 1 [ 24.430219] initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs [ 24.430223] calling check_early_ioremap_leak+0x0/0x8e @ 1 [ 24.430228] initcall check_early_ioremap_leak+0x0/0x8e returned 0 after 0 usecs [ 24.430232] calling sched_init_debug+0x0/0x4b @ 1 [ 24.430243] initcall sched_init_debug+0x0/0x4b returned 0 after 0 usecs [ 24.430247] calling init_oops_id+0x0/0x5d @ 1 [ 24.430251] initcall init_oops_id+0x0/0x5d returned 0 after 0 usecs [ 24.430255] calling disable_boot_consoles+0x0/0xf3 @ 1 [ 24.430259] initcall disable_boot_consoles+0x0/0xf3 returned 0 after 0 usecs [ 24.430263] calling pm_qos_power_init+0x0/0xf0 @ 1 [ 24.430277] device: 'cpu_dma_latency': device_add [ 24.430572] device: 'network_latency': device_add [ 24.430796] device: 'network_throughput': device_add [ 24.431028] initcall pm_qos_power_init+0x0/0xf0 returned 0 after 0 usecs [ 24.431033] calling clear_boot_tracer+0x0/0x52 @ 1 [ 24.431037] initcall clear_boot_tracer+0x0/0x52 returned 0 after 0 usecs [ 24.431042] calling max_swapfiles_check+0x0/0x2d @ 1 [ 24.431047] initcall max_swapfiles_check+0x0/0x2d returned 0 after 0 usecs [ 24.431052] calling random32_reseed+0x0/0xce @ 1 [ 24.431070] initcall random32_reseed+0x0/0xce returned 0 after 0 usecs [ 24.431075] calling pci_resource_alignment_sysfs_init+0x0/0x40 @ 1 [ 24.431085] initcall pci_resource_alignment_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 24.431089] calling pci_sysfs_init+0x0/0x77 @ 1 [ 24.431401] initcall pci_sysfs_init+0x0/0x77 returned 0 after 0 usecs [ 24.431405] calling seqgen_init+0x0/0x36 @ 1 [ 24.431425] initcall seqgen_init+0x0/0x36 returned 0 after 0 usecs [ 24.431429] calling hd_init+0x0/0x321 @ 1 [ 24.431478] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 24.431629] initcall hd_init+0x0/0x321 returned -1 after 0 usecs [ 24.431633] initcall hd_init+0x0/0x321 returned with error code -1 [ 24.431639] calling scsi_complete_async_scans+0x0/0x13b @ 1 [ 24.431643] initcall scsi_complete_async_scans+0x0/0x13b returned 0 after 0 usecs [ 24.431647] calling edd_init+0x0/0x386 @ 1 [ 24.431650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 24.431652] EDD information not available. [ 24.431656] initcall edd_init+0x0/0x386 returned -19 after 0 usecs [ 24.431659] calling memmap_init+0x0/0xce @ 1 [ 24.431778] initcall memmap_init+0x0/0xce returned 0 after 0 usecs [ 24.431781] calling dmatest_init+0x0/0x16c @ 1 [ 24.431802] initcall dmatest_init+0x0/0x16c returned 0 after 0 usecs [ 24.431806] calling tcp_congestion_default+0x0/0x39 @ 1 [ 24.431811] initcall tcp_congestion_default+0x0/0x39 returned 0 after 0 usecs [ 24.431815] calling ip_auto_config+0x0/0xf1d @ 1 [ 24.431842] initcall ip_auto_config+0x0/0xf1d returned 0 after 0 usecs [ 24.431846] calling initialize_hashrnd+0x0/0x40 @ 1 [ 24.431854] initcall initialize_hashrnd+0x0/0x40 returned 0 after 0 usecs [ 24.431894] async_waiting @ 1 [ 24.431897] async_continuing @ 1 after 0 usec [ 29.297460] EXT3-fs: INFO: recovery required on readonly filesystem. [ 29.300255] EXT3-fs: write access will be enabled during recovery. [ 29.345899] kjournald starting. Commit interval 5 seconds [ 29.350055] EXT3-fs: recovery complete. [ 29.354793] EXT3-fs: mounted filesystem with writeback data mode. [ 29.360101] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. [ 29.366790] async_waiting @ 1 [ 29.370004] async_continuing @ 1 after 0 usec [ 29.374355] debug: unmapping init memory ffffffff828ac000..ffffffff82985000 [ 29.380094] Write protecting the kernel read-only data: 22020k [ 29.390362] Testing CPA: undo ffffffff81009000-ffffffff8258a000 [ 29.397211] Testing CPA: again [ 29.397780] bus: 'serio': really_probe: probing driver atkbd with device serio0 [ 29.432248] device: 'input0': device_add [ 29.447136] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. [ 29.464851] input: AT Translated Set 2 keyboard as /class/input/input0 [ 29.464851] device: 'event0': device_add [ 29.474693] evbug.c: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 29.480032] driver: 'serio0': driver_bound: bound to device 'atkbd' [ 29.486339] bus: 'serio': really_probe: bound device serio0 to driver atkbd [ 29.487052] device: 'serio1': device_add [ 29.490012] bus: 'serio': add device serio1 [ 29.504888] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd [ 29.504888] bus: 'serio': really_probe: probing driver atkbd with device serio1 [ 29.525961] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse [ 29.530000] bus: 'serio': really_probe: probing driver psmouse with device serio1
Mount failed for selinuxfs on /selinux: No such device
INIT: version 2.86 booting
Welcome to Fedora
Press 'I' to enter interactive startup.
[ 30.915335] device: 'input1': device_add [ 30.930122] input: ImPS/2 Generic Wheel Mouse as /class/input/input1 [ 30.930122] device: 'mouse0': device_add [ 30.940546] device: 'event1': device_add [ 30.945070] evbug.c: Connected device: input1 (ImPS/2 Generic Wheel Mouse at isa0060/serio1/input0) [ 30.945070] driver: 'serio1': driver_bound: bound to device 'psmouse' [ 30.950012] bus: 'serio': really_probe: bound device serio1 to driver psmouse
Setting clock (localtime): Mon Aug 3 02:49:22 CEST 2009 [ OK ]
Starting udev: /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory /sbin/start_udev: line 187: /proc/sys/kernel/hotplug: No such file or directory
[ 34.989808] CPA self-test: [ 35.002100] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0 [ 35.028029] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0 [ 35.055923] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0 [ 35.059899] ok. [ 36.010887] eth1: link down [ 36.010887] device: 'bpq0': device_add [ 36.021765] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 36.075293] device: 'bpq1': device_add [ 37.270073] IPv4 FIB: Using LC-trie version 0.408
[ OK ]
Loading default keymap (us): [ OK ]
Setting hostname mercury: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda6 /1: Superblock last mount time is in the future. FIXED. /1: Superblock last write time is in the future. FIXED. /1: clean, 375369/7325696 files, 3524827/7325632 blocks [/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda5 /home: recovering journal
/home: Superblock last mount time is in the future. FIXED. /home: clean, 134936/6111232 files, 2541855/12209392 blocks [ OK ]
Remounting root filesystem in read-write mode: [ 43.092507] EXT3 FS on sda6, internal journal
[ OK ]
Mounting local filesystems: [ 43.208424] kjournald starting. Commit interval 5 seconds
[ 43.211002] EXT3 FS on sda5, internal journal [ 43.211002] EXT3-fs: mounted filesystem with writeback data mode. [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ 44.106716] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting system message bus: [ 45.537838] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
Quoted 4 lines · Ingo Molnar
i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?
It does, thank you! This problem really is happening during boot.
Quoted 2 lines
Let me know if you still would like me to run your diagnostic patch too.
Now that you mention it, you should probably let me test it a bit first.
Thanx, Paul
Quoted 52 lines · Paul E. McKenney
Quoted 1 line
FYI, the new warning triggered in -tip testing:
Yow!!! I never was able to get this to trigger... Of course, I never was able to reproduce the original problem, either.
Just so you know, one of the reasons it took me so long to come up with the fix is that this just isn't supposed to happen. Where I grew up, CPUs were supposed to come online -before- starting to handle softirqs. ;-)
Here is my reasoning:
o
rcu_init(), which is invoked before a second CPU can possibly
come online, callshotplug_notifier(), which causesrcu_barrier_cpu_hotplug()to be invoked in response to any CPU-hotplug event.o We know
rcu_init()really was called, because otherwise
open_softirq(RCU_SOFTIRQ)never gets called, so the softirq would never have happened. In addition, there should be a "Hierarchical RCU implementation" message in your bootlog. (Is there?)o
rcu_barrier_cpu_hotplug()unconditionally invokes
rcu_cpu_notify()on every CPU-hotplug event.o
rcu_cpu_notify()invokesrcu_online_cpu()in response to
anyCPU_UP_PREPAREorCPU_UP_PREPARE_FROZENCPU-hotplug event.o The
CPU_UP_PREPAREandCPU_UP_PREPARE_FROZENCPU-hotplug events
happen before the CPU in question is capable of running any code.o This looks to be the first onlining of this CPU during boot
(right?). So we cannot possibly have some strange situation where the end of the prior CPU-offline event overlaps with the current CPU-online event. (Yes, this isn't supposed to happen courtesy of CPU-hotplug locking, but impossibility is clearly no reason to dismiss possible scenarios for -this- particular bug.)o Therefore the
WARN_ON_ONCE()cannot possibly trigger.This would be a convincing argument, aside from the fact that you really did make it trigger. So first, anything I am missing in the above? If not, could you please help me with the following, at least if the answers are readily available?
o Is rcu_init()'s "Hierarchical RCU implementation" log message
in your bootlog?o Is
_cpu_up()really being called, and, if so, is it really
invoking__raw_notifier_call_chain()withCPU_UP_PREPARE?
Quoted 6 lines
o Is this really during initial boot, or am I misreading your
bootlog? (The other reason I believe that this happened on the first CPU-online for this CPU is that ->beenonline, once set, is never cleared.)Gautham, any thoughts on what might be happening here?
Beats me. You're reasoning seems quite iron-clad, there's nothing that's obviously missing at least from the CPU-Hotplug point of view.
I am trying to reproduce this on 2.6.31-rc5 tip-master + your patch with an added printk.
Let me see if I can catch it.
-->
rcu: Check if the cpu has been initialized before handling callbacks
From: Gautham R Shenoy <[email protected]>
--- kernel/rcutree.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
kernel/rcutree.c +4 -0
@@ -1137,6 +1137,8 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) {unsigned long flags; +WARN_ON_ONCE (rdp->beenonline ==0 ); +/* * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs.
@@ -1351,6 +1353,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp)struct rcu_data *rdp = rsp->rda[cpu];struct rcu_node *rnp =rcu_get_root (rsp); +printk (KERN_INFO "Initializing RCU for cpu %d\n" , cpu); +/* Set up local state, ensuring consistent view of global state. */ spin_lock_irqsave (&rnp->lock, flags); lastcomp = rsp->completed;
Signature · 2 lines
Thanks and Regards gautham
Quoted 94 lines · Gautham R Shenoy
Quoted 84 lines · Ingo Molnar
[ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.010000] ... MAX_LOCK_DEPTH: 48 [ 0.010000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.010000] ... CLASSHASH_SIZE: 4096 [ 0.010000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.010000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.010000] ... CHAINHASH_SIZE: 16384 [ 0.010000] memory used by lock dependency info: 5823 kB [ 0.010000] per task-struct memory footprint: 1920 bytes [ 0.010000] ------------------------ [ 0.010000] | Locking API testsuite: [ 0.010000] ---------------------------------------------------------------------------- [ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.010000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] recursive read-lock: | ok | |failed| [ 0.010000] recursive read-lock #2: | ok | |failed| [ 0.010000] mixed read-write-lock: |failed| |failed| [ 0.010000] mixed write-read-lock: |failed| |failed| [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.010000] hard-irq read-recursion/123: ok | [ 0.010000] soft-irq read-recursion/123: ok | [ 0.010000] hard-irq read-recursion/132: ok | [ 0.010000] soft-irq read-recursion/132: ok | [ 0.010000] hard-irq read-recursion/213: ok | [ 0.010000] soft-irq read-recursion/213: ok | [ 0.010000] hard-irq read-recursion/231: ok |Quoted 8 lines
[ 0.010000] soft-irq read-recursion/231: ok | [ 0.010000] hard-irq read-recursion/312: ok | [ 0.010000] soft-irq read-recursion/312: ok | [ 0.010000] hard-irq read-recursion/321: ok | [ 0.010000] soft-irq read-recursion/321: ok | [ 0.010000] -------------------------------------------------------- [ 0.010000] 133 out of 218 testcases failed, as expected. | [ 0.010000] ----------------------------------------------------
Quoted 6 lines
Hmm.. I tried to reproduce this on a similar 2 CPU machine running linux-2.6.31-rc5-tip. However, I couldn't reproduce this
WARN_ON.That aside, in my case, all the 218 lockdep test cases passed, while this bootlog shows quite a few failures.
So, wondering if I am testing the right kernel version.
hm, maybe i sent the wrong config.
I'll try to reproduce it once more and will double check.
Ingo
Quoted 84 lines · Ingo Molnar
[ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.010000] ... MAX_LOCK_DEPTH: 48 [ 0.010000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.010000] ... CLASSHASH_SIZE: 4096 [ 0.010000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.010000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.010000] ... CHAINHASH_SIZE: 16384 [ 0.010000] memory used by lock dependency info: 5823 kB [ 0.010000] per task-struct memory footprint: 1920 bytes [ 0.010000] ------------------------ [ 0.010000] | Locking API testsuite: [ 0.010000] ---------------------------------------------------------------------------- [ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.010000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] recursive read-lock: | ok | |failed| [ 0.010000] recursive read-lock #2: | ok | |failed| [ 0.010000] mixed read-write-lock: |failed| |failed| [ 0.010000] mixed write-read-lock: |failed| |failed| [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.010000] hard-irq read-recursion/123: ok | [ 0.010000] soft-irq read-recursion/123: ok | [ 0.010000] hard-irq read-recursion/132: ok | [ 0.010000] soft-irq read-recursion/132: ok | [ 0.010000] hard-irq read-recursion/213: ok | [ 0.010000] soft-irq read-recursion/213: ok | [ 0.010000] hard-irq read-recursion/231: ok |
Quoted 8 lines
[ 0.010000] soft-irq read-recursion/231: ok | [ 0.010000] hard-irq read-recursion/312: ok | [ 0.010000] soft-irq read-recursion/312: ok | [ 0.010000] hard-irq read-recursion/321: ok | [ 0.010000] soft-irq read-recursion/321: ok | [ 0.010000] -------------------------------------------------------- [ 0.010000] 133 out of 218 testcases failed, as expected. | [ 0.010000] ----------------------------------------------------
Hmm.. I tried to reproduce this on a similar 2 CPU machine running linux-2.6.31-rc5-tip. However, I couldn't reproduce this WARN_ON.
That aside, in my case, all the 218 lockdep test cases passed, while this bootlog shows quite a few failures.
So, wondering if I am testing the right kernel version.
Appending the patch, bootup log and the config.
/*************** Patch ******************************/
rcu: Check if the cpu has been initialized before handling callbacks
From: Gautham R Shenoy <[email protected]>
--- kernel/rcutree.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
kernel/rcutree.c +4 -0
@@ -1137,6 +1137,8 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) {unsigned long flags; +WARN_ON_ONCE (rdp->beenonline ==0 ); +/* * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs.
@@ -1351,6 +1353,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp)struct rcu_data *rdp = rsp->rda[cpu];struct rcu_node *rnp =rcu_get_root (rsp); +printk (KERN_INFO "Initializing RCU for cpu %d\n" , cpu); +/* Set up local state, ensuring consistent view of global state. */ spin_lock_irqsave (&rnp->lock, flags); lastcomp = rsp->completed;
/*************** Boot Log ******************************/
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-autobench console=tty0 console=ttyS0,9600 autobench_args:
root=/dev/sda2 ABAT:1249362544
[Linux-bzImage, setup=0x3000, size=0x334830]
initrd /boot/initrd-autobench.img
[Linux-initrd @ 0x37de8000, 0x2077cb bytes]
boot
Linux version 2.6.31-rc5-autokern1-tip (root@elm3b165) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Tue Aug 4 05:08:45 UTC 2009 Command line: console=tty0 console=ttyS0,9600 autobench_args: root=/dev/sda2 ABAT:1249362544
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dff70000 (usable)
BIOS-e820: 00000000dff70000 - 00000000dff7b000 (ACPI data)
BIOS-e820: 00000000dff7b000 - 00000000dff80000 (ACPI NVS)
BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000400000000 (usable)
DMI 2.3 present.last_pfn = 0x400000 max_arch_pfn = 0x400000000last_pfn = 0xdff70 max_arch_pfn = 0x400000000init_memory_mapping: 0000000000000000-00000000dff70000init_memory_mapping: 0000000100000000-0000000400000000
RAMDISK: 37de8000 - 37fef7cb
ACPI: RSDP 00000000000f7560 00024 (v02 PTLTD )
ACPI: XSDT 00000000dff78a5b 0004C (v01 PTLTD XSDT 06040000 LTP 00000000)
ACPI: FACP 00000000dff7ac02 000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240)
ACPI: DSDT 00000000dff78aa7 020E7 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E)
ACPI: FACS 00000000dff7bfc0 00040
ACPI: SSDT 00000000dff7acf6 0020C (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: HPET 00000000dff7af02 00038 (v01 AMD HAMMER 06040000 PTEC 00000000)
ACPI: APIC 00000000dff7af3a 00076 (v01 PTLTD APIC 06040000 LTP 00000000)
ACPI: SPCR 00000000dff7afb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
Scanning NUMA topology in Northbridge 24
Number of nodes 2
Node 0 MemBase 0000000000000000 Limit 0000000200000000
Node 1 MemBase 0000000200000000 Limit 0000000400000000
Using node hash shift of 33
found SMP MP-table at [ffff8800000f75e0] f75e0
Bootmem setup node 0 0000000000000000-0000000200000000
NODE_DATA [0000000000001000 - 0000000000005fff]
bootmap [0000000000018000 - 0000000000057fff] pages 40
(8 early reservations) ==> bootmem [0000000000 - 0200000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00022fbea8] TEXT DATA BSS ==> [0001000000 - 00022fbea8]
#3 [0037de8000 - 0037fef7cb] RAMDISK ==> [0037de8000 - 0037fef7cb]
#4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000]
#5 [00022fc000 - 00022fc108] BRK ==> [00022fc000 - 00022fc108]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000018000] PGTABLE ==> [000000c000 - 0000018000]
Bootmem setup node 1 0000000200000000-0000000400000000
NODE_DATA [0000000200000000 - 0000000200004fff]
bootmap [0000000200005000 - 0000000200044fff] pages 40
(8 early reservations) ==> bootmem [0200000000 - 0400000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 00022fbea8] TEXT DATA BSS
#3 [0037de8000 - 0037fef7cb] RAMDISK
#4 [000009ac00 - 0000100000] BIOS reserved
#5 [00022fc000 - 00022fc108] BRK
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 0000018000] PGTABLE
found SMP MP-table at [ffff8800000f75e0] f75e0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00400000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x0000009a
0: 0x00000100 -> 0x000dff70
0: 0x00100000 -> 0x00200000
1: 0x00200000 -> 0x00400000Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xe8000000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xe8000000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xe8001000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xe8001000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x102282a0 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:2
PERCPU: Remapped at ffffc90000000000 with large pages, static data 1914656 bytes
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3956370
Policy zone: Normal
Kernel command line: console=tty0 console=ttyS0,9600 autobench_args: root=/dev/sda2 ABAT:1249362544 PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Memory: 15746208k/16777216k available (4270k kernel code, 525272k absent, 505736k reserved, 3005k data, 2396k init) Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
Initializing RCU for cpu 0
Initializing RCU for cpu 0
NR_IRQS:1280
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2392.251 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.50 BogoMIPS (lpj=9569004) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
mce: CPU supports 5 MCE banks
Performance Counters: AMD PMU driver.
... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Opteron(tm) Processor 250 stepping 0a
Initializing RCU for cpu 1
Initializing RCU for cpu 1
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4785.02 BogoMIPS (lpj=9570044)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 1
mce: CPU supports 5 MCE banks
CPU1: AMD Opteron(tm) Processor 250 stepping 0a
Brought up 2 CPUs
Total of 2 processors activated (9569.52 BogoMIPS).
NET: Registered protocol family 16
TOM: 00000000e0000000 aka 3584M
TOM2: 0000000400000000 aka 16384M
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: PME# supported from D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
pci 0000:03:03.0: PME# disabled
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:02:02.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe0000-0xfffff) overlaps 0000:02:02.0 BAR 6 (0x0-0xfffff), disabling pnp 00:06: mem resource (0xc0000-0xc7fff) overlaps 0000:02:02.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x100000-0xdfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x1100-0x117f has been reserved
system 00:06: ioport range 0x1180-0x11ff has been reserved
system 00:06: ioport range 0x300-0x307 has been reserved
system 00:06: ioport range 0x421-0x42f has been reserved
system 00:06: ioport range 0xca2-0xca3 has been reserved
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
pci 0000:00:06.0: IO window: 0x2000-0x2fff pci 0000:00:06.0: MEM window: 0xe8100000-0xe81fffff pci 0000:00:06.0: PREFETCH window: 0xe0000000-0xe00fffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0x3000-0x3fff pci 0000:00:0a.0: MEM window: 0xe8200000-0xe82fffff pci 0000:00:0a.0: PREFETCH window: 0xe0100000-0xe01fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0b.0: IO window: 0x4000-0x4fff pci 0000:00:0b.0: MEM window: 0xe8300000-0xe83fffff pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2077k freed
HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 [email protected]).
msgmni has been set to 30758
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
boot interrupts on PCI device 0x1022:0x746b already disabled
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
Real Time Clock Driver v1.12b
AMD768 RNG detected
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Platform driver 'floppy' needs updating - please use dev_pm_ops
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:07.1: UDMA133 controller
amd74xx 0000:00:07.1: IDE controller (0x1022:0x7469 rev 0x03) amd74xx 0000:00:07.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1020-0x1027
ide1: BM-DMA at 0x1028-0x102fhdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20sata_sil 0000:01:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xe8102000 tf 0xe8102080 irq 17
ata2: SATA max UDMA/100 mmio m512@0xe8102000 tf 0xe81020c0 irq 17
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-6: ST380013AS, 3.25, max UDMA/133
ata1.00: 156312576 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.25 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA link down (SStatus 0 SControl 310)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:03:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
e1000: 0000:03:03.0: e1000_probe: (PCI:66MHz:64-bit) 00:02:b3:9b:20:ef
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.99 (April 20, 2009)
tg3 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
tg3 0000:02:01.0: PME# disabled
eth1: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0d:60:14:bf:64
eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
tg3 0000:02:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
tg3 0000:02:01.1: PME# disabled
eth2: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0d:60:14:bf:65
eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
mptspi 0000:02:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 B2: Capabilities={Initiator}
scsi2 : ioc0: LSI53C1030 B2, FwRev=01032316h, Ports=1, MaxQ=222, IRQ=26
Fusion MPT SAS Host driver 3.04.10
ieee1394: raw1394: /dev/raw1394 device initializedehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci_hcd 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:01:00.0: OHCI Host Controllerohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1ohci_hcd 0000:01:00.0: irq 19, io mem 0xe8100000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detectedohci_hcd 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:01:00.1: OHCI Host Controllerohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2ohci_hcd 0000:01:00.1: irq 19, io mem 0xe8101000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detecteduhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
Platform driver 'i8042' needs updating - please use dev_pm_ops
usb 1-1: new full speed USB device using ohci_hcd and address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 2 AMD Opteron(tm) Processor 250 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc usb 1-1: configuration #1 chosen from 1 choice input: IBM PPC I/F as /devices/pci0000:00/0000:00:06.0/0000:01:00.0/usb1/1-1/1-1:1.0/input/input2 generic-usb 0003:04B3:4001.0001: input: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:01:00.0-1/input0 input: IBM PPC I/F as /devices/pci0000:00/0000:00:06.0/0000:01:00.0/usb1/1-1/1-1:1.1/input/input3 generic-usb 0003:04B3:4001.0002: input: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:01:00.0-1/input1 powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0xe powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0xe Freeing unused kernel memory: 2396k freed Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ... ata_id[1419]: main: unable to open '/dev/.tmp-0-0' ata_id[1461]: main: unable to open '/dev/.tmp-0-0' Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ... Done.
Begin: Waiting for root file system... ...
Signature · 2 lines
Thanks and Regards gautham
Quoted 11 lines · Ingo Molnar
Quoted 7 lines
Hmm.. I tried to reproduce this on a similar 2 CPU machine running linux-2.6.31-rc5-tip. However, I couldn't reproduce this
WARN_ON.That aside, in my case, all the 218 lockdep test cases passed, while this bootlog shows quite a few failures. So, wondering if I am testing the right kernel version.
hm, maybe i sent the wrong config.
I'll try to reproduce it once more and will double check.
Another config attached which triggers this, plus the bootlog. I've rebooted the same kernel once more and the warning triggered for a second time as well.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Tue Aug 4 11:29:31 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
# CONFIG_BROKEN_BOOT_DISALLOWED is not setCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_SWAP=y
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not setCONFIG_TREE_RCU_TRACE=y
# CONFIG_PREEMPT_RCU_TRACE is not setCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not setCONFIG_RT_GROUP_SCHED=yCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=y
# CONFIG_NET_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=y
# CONFIG_UID16 is not setCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=y
# CONFIG_SIGNALFD is not setCONFIG_TIMERFD=yCONFIG_EVENTFD=y
# CONFIG_SHMEM is not setCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#CONFIG_PERF_COUNTERS=yCONFIG_EVENT_PROFILE=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=yCONFIG_STRIP_ASM_SYMS=yCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=y
# CONFIG_OPROFILE_IBS is not set
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not setCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="anticipatory"CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP_SUPPORT=y
# CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_XEN_MAX_DOMAIN_MEMORY=32
# CONFIG_XEN_DEBUG_FS is not set CONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_SPINLOCKS=y CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not set CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not setCONFIG_MAXSMP=yCONFIG_NR_CPUS=4096CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=yCONFIG_I8K=y
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_X86_CPU_DEBUG is not set CONFIG_UP_WANTED_1=y
# CONFIG_UP_WANTED_2 is not setCONFIG_SMP=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_K8_NUMA=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=9 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MTRR is not setCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE="" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIE_ECRC=yCONFIG_PCIEAER_INJECT=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not setCONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=yCONFIG_PCMCIA_DEBUG=y
# CONFIG_PCMCIA is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not setCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=yCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=yCONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not setCONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not setCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_ARPD=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=yCONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not setCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not setCONFIG_INET6_IPCOMP=yCONFIG_IPV6_MIP6=yCONFIG_INET6_XFRM_TUNNEL=yCONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not setCONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not setCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_SIT is not setCONFIG_IPV6_TUNNEL=yCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=yCONFIG_IPV6_MROUTE=yCONFIG_IPV6_PIMSM_V2=yCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not setCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not setCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not setCONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not setCONFIG_RDS=yCONFIG_RDS_DEBUG=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not setCONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=yCONFIG_NET_DSA_TAG_TRAILER=yCONFIG_NET_DSA_MV88E6XXX=yCONFIG_NET_DSA_MV88E6060=yCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=yCONFIG_NET_DSA_MV88E6123_61_65=yCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=yCONFIG_IPX=yCONFIG_IPX_INTERN=yCONFIG_ATALK=yCONFIG_DEV_APPLETALK=yCONFIG_IPDDP=yCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=yCONFIG_X25=y
# CONFIG_LAPB is not setCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not set
# CONFIG_WAN_ROUTER is not setCONFIG_PHONET=yCONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not setCONFIG_DCB=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_NET_DROP_MONITOR=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not setCONFIG_CAN=yCONFIG_CAN_RAW=yCONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEV is not setCONFIG_CAN_DEBUG_DEVICES=yCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=y
# CONFIG_IRNET is not set
# CONFIG_IRCOMM is not setCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not setCONFIG_ACTISYS_DONGLE=yCONFIG_TEKRAM_DONGLE=yCONFIG_TOIM3232_DONGLE=yCONFIG_LITELINK_DONGLE=yCONFIG_MA600_DONGLE=y
# CONFIG_GIRBIL_DONGLE is not setCONFIG_MCP2120_DONGLE=y
# CONFIG_OLD_BELKIN_DONGLE is not set
# CONFIG_ACT200L_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not setCONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#CONFIG_USB_IRDA=yCONFIG_SIGMATEL_FIR=yCONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=yCONFIG_SMC_IRCC_FIR=yCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not setCONFIG_BT=yCONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not setCONFIG_BT_RFCOMM=yCONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not setCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not setCONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_CFG80211_DEBUGFS=yCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=y
# CONFIG_MAC80211_DEFAULT_PS is not setCONFIG_MAC80211_DEFAULT_PS_VALUE=0
#
# Rate control algorithm selection
#CONFIG_MAC80211_RC_PID=yCONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not setCONFIG_MAC80211_DEBUG_MENU=yCONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=yCONFIG_MAC80211_NOINLINE=yCONFIG_MAC80211_VERBOSE_DEBUG=yCONFIG_MAC80211_HT_DEBUG=yCONFIG_MAC80211_TKIP_DEBUG=yCONFIG_MAC80211_IBSS_DEBUG=yCONFIG_MAC80211_VERBOSE_PS_DEBUG=yCONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_SERIAL=yCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not setCONFIG_PARPORT_NOT_PC=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not setCONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_OSD is not setCONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not setCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=yCONFIG_IBM_ASM=yCONFIG_PHANTOM=yCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=yCONFIG_TIFM_7XX1=yCONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not setCONFIG_HP_ILO=yCONFIG_ISL29003=yCONFIG_C2PORT=yCONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_AT25=yCONFIG_EEPROM_LEGACY=yCONFIG_EEPROM_MAX6875=yCONFIG_EEPROM_93CX6=yCONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=yCONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not setCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not setCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not setCONFIG_SCSI_CXGB3_ISCSI=yCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not setCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not setCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=yCONFIG_AIC94XX_DEBUG=yCONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not setCONFIG_SCSI_DPT_I2O=yCONFIG_SCSI_ADVANSYS=yCONFIG_SCSI_ARCMSR=yCONFIG_SCSI_ARCMSR_AER=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not setCONFIG_MEGARAID_SAS=yCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=yCONFIG_LIBFC=yCONFIG_LIBFCOE=yCONFIG_FCOE=y
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not setCONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not setCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GDTH is not setCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_PPA=yCONFIG_SCSI_IMM=y
# CONFIG_SCSI_IZIP_EPP16 is not setCONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_IPR=yCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_QLOGIC_1280=yCONFIG_SCSI_QLA_FC=yCONFIG_SCSI_QLA_ISCSI=yCONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=yCONFIG_SCSI_SRP=yCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not setCONFIG_SCSI_OSD_INITIATOR=yCONFIG_SCSI_OSD_ULD=yCONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=yCONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not setCONFIG_SATA_PROMISE=yCONFIG_SATA_SX4=yCONFIG_SATA_SIL=yCONFIG_SATA_SIS=yCONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not setCONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not setCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=yCONFIG_PATA_CMD640_PCI=yCONFIG_PATA_CMD64X=yCONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not setCONFIG_PATA_CYPRESS=yCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not setCONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not setCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=yCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=yCONFIG_PATA_NINJA32=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not setCONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not setCONFIG_PATA_RADISYS=yCONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not setCONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not setCONFIG_MD_LINEAR=yCONFIG_MD_RAID0=yCONFIG_MD_RAID1=yCONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not setCONFIG_MD_FAULTY=yCONFIG_BLK_DEV_DM=yCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=yCONFIG_DM_SNAPSHOT=yCONFIG_DM_MIRROR=yCONFIG_DM_LOG_USERSPACE=yCONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not setCONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not setCONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not setCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=yCONFIG_IEEE1394_PCILYNX=y
# CONFIG_IEEE1394_SBP2 is not setCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=yCONFIG_IEEE1394_VIDEO1394=yCONFIG_IEEE1394_DV1394=y
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_DUMMY=y
# CONFIG_BONDING is not setCONFIG_MACVLAN=yCONFIG_EQUALIZER=yCONFIG_TUN=yCONFIG_VETH=yCONFIG_ARCNET=yCONFIG_ARCNET_1201=yCONFIG_ARCNET_1051=yCONFIG_ARCNET_RAW=yCONFIG_ARCNET_CAP=y
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not setCONFIG_ARCNET_COM20020=yCONFIG_ARCNET_COM20020_PCI=yCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=yCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set CONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=y
# CONFIG_TYPHOON is not set CONFIG_ENC28J60=y
# CONFIG_ENC28J60_WRITEVERIFY is not set CONFIG_ETHOC=yCONFIG_DNET=y
# CONFIG_NET_TULIP is not set CONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=yCONFIG_AMD8111_ETH=y CONFIG_ADAPTEC_STARFIRE=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_E100=yCONFIG_FEALNX=yCONFIG_NATSEMI=yCONFIG_NE2K_PCI=yCONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set CONFIG_R6040=y
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not setCONFIG_TLAN=yCONFIG_KS8842=yCONFIG_KS8851=y
# CONFIG_VIA_RHINE is not set CONFIG_SC92031=yCONFIG_NET_POCKET=yCONFIG_ATP=yCONFIG_DE600=yCONFIG_DE620=yCONFIG_ATL2=yCONFIG_NETDEV_1000=yCONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=yCONFIG_DL2K=yCONFIG_E1000=yCONFIG_E1000E=y
# CONFIG_IP1000 is not setCONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set CONFIG_HAMACHI=y
# CONFIG_YELLOWFIN is not set CONFIG_R8169=yCONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set CONFIG_VIA_VELOCITY=yCONFIG_TIGON3=y
# CONFIG_BNX2 is not setCONFIG_QLA3XXX=yCONFIG_ATL1=yCONFIG_ATL1E=yCONFIG_ATL1C=yCONFIG_JME=yCONFIG_NETDEV_10000=yCONFIG_MDIO=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=yCONFIG_ENIC=yCONFIG_IXGBE=yCONFIG_IXGBE_DCB=yCONFIG_IXGB=y
# CONFIG_S2IO is not setCONFIG_MYRI10GE=yCONFIG_NIU=yCONFIG_MLX4_EN=yCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=yCONFIG_TEHUTI=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not setCONFIG_SFC=yCONFIG_BE2NET=yCONFIG_TR=yCONFIG_IBMOL=yCONFIG_3C359=y
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=yCONFIG_STRIP=yCONFIG_WLAN_80211=yCONFIG_LIBERTAS=yCONFIG_LIBERTAS_USB=yCONFIG_LIBERTAS_SPI=y
# CONFIG_LIBERTAS_DEBUG is not setCONFIG_LIBERTAS_THINFIRM=yCONFIG_LIBERTAS_THINFIRM_USB=yCONFIG_AIRO=yCONFIG_ATMEL=yCONFIG_PCI_ATMEL=yCONFIG_AT76C50X_USB=yCONFIG_PRISM54=yCONFIG_USB_ZD1201=yCONFIG_USB_NET_RNDIS_WLAN=yCONFIG_RTL8180=yCONFIG_RTL8187=yCONFIG_RTL8187_LEDS=y
# CONFIG_ADM8211 is not setCONFIG_MAC80211_HWSIM=yCONFIG_MWL8K=y
# CONFIG_P54_COMMON is not setCONFIG_ATH_COMMON=yCONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not setCONFIG_ATH9K=yCONFIG_ATH9K_DEBUG=yCONFIG_AR9170_USB=yCONFIG_AR9170_LEDS=y
# CONFIG_IPW2100 is not setCONFIG_IPW2200=y
# CONFIG_IPW2200_MONITOR is not setCONFIG_IPW2200_QOS=yCONFIG_IPW2200_DEBUG=yCONFIG_LIBIPW=yCONFIG_LIBIPW_DEBUG=y
# CONFIG_IWLWIFI is not setCONFIG_HOSTAP=yCONFIG_HOSTAP_FIRMWARE=yCONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not setCONFIG_B43=yCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=yCONFIG_B43_LEDS=yCONFIG_B43_HWRNG=yCONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO is not setCONFIG_B43LEGACY=yCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_HWRNG=yCONFIG_B43LEGACY_DEBUG=yCONFIG_B43LEGACY_DMA=y
# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not setCONFIG_B43LEGACY_DMA_MODE=y
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not setCONFIG_HERMES=yCONFIG_HERMES_CACHE_FW_ON_INIT=yCONFIG_PLX_HERMES=yCONFIG_TMD_HERMES=y
# CONFIG_NORTEL_HERMES is not setCONFIG_PCI_HERMES=yCONFIG_WL12XX=y
#
# WiMAX Wireless Broadband devices
#
#
# Enable MMC support to see WiMAX SDIO drivers
#
#
# USB Network Adapters
#CONFIG_USB_CATC=yCONFIG_USB_KAWETH=y
# CONFIG_USB_PEGASUS is not setCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not setCONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not setCONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not setCONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not setCONFIG_USB_CDC_PHONET=y
# CONFIG_WAN is not setCONFIG_IEEE802154_DRIVERS=yCONFIG_IEEE802154_FAKEHARD=y
# CONFIG_XEN_NETDEV_FRONTEND is not setCONFIG_FDDI=yCONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
# CONFIG_SKFP is not setCONFIG_HIPPI=yCONFIG_ROADRUNNER=yCONFIG_ROADRUNNER_LARGE_RINGS=yCONFIG_PLIP=yCONFIG_PPP=yCONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=yCONFIG_PPPOL2TP=yCONFIG_SLIP=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not setCONFIG_PHONE=y
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=yCONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not setCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not setCONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not setCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=yCONFIG_JOYSTICK_GRIP=yCONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not setCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=yCONFIG_JOYSTICK_IFORCE=yCONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not setCONFIG_JOYSTICK_GAMECON=yCONFIG_JOYSTICK_TURBOGRAFX=yCONFIG_JOYSTICK_JOYDUMP=yCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_JOYSTICK_WALKERA0701 is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not setCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=yCONFIG_TOUCHSCREEN_AD7877=yCONFIG_TOUCHSCREEN_AD7879_I2C=yCONFIG_TOUCHSCREEN_AD7879=yCONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not setCONFIG_TOUCHSCREEN_MTOUCH=yCONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not setCONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not setCONFIG_TOUCHSCREEN_USB_COMPOSITE=yCONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not setCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not setCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not setCONFIG_INPUT_ATI_REMOTE=yCONFIG_INPUT_ATI_REMOTE2=yCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not setCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_TWL4030_PWRBUTTON=yCONFIG_INPUT_UINPUT=yCONFIG_INPUT_PCF50633_PMU=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not setCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not setCONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not setCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=yCONFIG_ROCKETPORT=yCONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not setCONFIG_MOXA_INTELLIO=yCONFIG_MOXA_SMARTIO=y
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not setCONFIG_SYNCLINKMP=yCONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not setCONFIG_RISCOM8=yCONFIG_SPECIALIX=yCONFIG_SX=y
# CONFIG_RIO is not setCONFIG_STALDRV=yCONFIG_STALLION=y
# CONFIG_ISTALLION is not setCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_MAX3100=yCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not setCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not setCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not setCONFIG_HW_RANDOM_VIA=yCONFIG_NVRAM=yCONFIG_R3964=y
# CONFIG_APPLICOM is not setCONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not setCONFIG_TCG_TPM=y
# CONFIG_TCG_NSC is not setCONFIG_TCG_ATMEL=y
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not setCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=y
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not setCONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not setCONFIG_SENSORS_PCA9539=yCONFIG_SENSORS_TSL2550=yCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=yCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=yCONFIG_SPI_BUTTERFLY=yCONFIG_SPI_LM70_LLP=y
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=yCONFIG_SPI_TLE62X0=y
#
# PPS support
#CONFIG_PPS=yCONFIG_PPS_DEBUG=yCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not setCONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not setCONFIG_W1_SLAVE_DS2760=yCONFIG_W1_SLAVE_BQ27000=yCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not setCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_BQ27x00=yCONFIG_BATTERY_MAX17040=yCONFIG_CHARGER_PCF50633=yCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ABITUGURU3=yCONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not setCONFIG_SENSORS_ADCXX=yCONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not setCONFIG_SENSORS_ADM1026=yCONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not setCONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7462 is not setCONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not setCONFIG_SENSORS_K8TEMP=yCONFIG_SENSORS_ASB100=yCONFIG_SENSORS_ATXP1=yCONFIG_SENSORS_DS1621=yCONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not setCONFIG_SENSORS_F75375S=yCONFIG_SENSORS_FSCHER=yCONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not setCONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_GL518SM is not setCONFIG_SENSORS_GL520SM=yCONFIG_SENSORS_CORETEMP=yCONFIG_SENSORS_IBMAEM=yCONFIG_SENSORS_IBMPEX=yCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not setCONFIG_SENSORS_LM70=yCONFIG_SENSORS_LM75=yCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not setCONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not setCONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not setCONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX1619 is not setCONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_PC87360 is not setCONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not setCONFIG_SENSORS_DME1737=yCONFIG_SENSORS_SMSC47M1=yCONFIG_SENSORS_SMSC47M192=yCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_TMP401=yCONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=yCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83L785TS is not setCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_APPLESMC is not setCONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not setCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not setCONFIG_ADVANTECH_WDT=yCONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not setCONFIG_IB700_WDT=yCONFIG_IBMASR=y
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=yCONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not setCONFIG_IT8712F_WDT=y
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not setCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=y
# CONFIG_60XX_WDT is not setCONFIG_SBC8360_WDT=yCONFIG_CPU5_WDT=yCONFIG_SMSC_SCH311X_WDT=y
# CONFIG_SMSC37B787_WDT is not setCONFIG_W83627HF_WDT=yCONFIG_W83877F_WDT=yCONFIG_W83977F_WDT=y
# CONFIG_MACHZ_WDT is not setCONFIG_SBC_EPX_C3_WATCHDOG=y
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=yCONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not setCONFIG_HTC_PASIC3=yCONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not setCONFIG_MFD_WM8400=yCONFIG_MFD_PCF50633=yCONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not setCONFIG_AB3100_CORE=yCONFIG_EZX_PCAP=y
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=y
# CONFIG_AGP_VIA is not setCONFIG_DRM=yCONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=yCONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not setCONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not setCONFIG_DRM_VIA=yCONFIG_DRM_SAVAGE=yCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not setCONFIG_FB_LITTLE_ENDIAN=yCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not setCONFIG_FB_CYBER2000=yCONFIG_FB_ARC=y
# CONFIG_FB_IMSTT is not setCONFIG_FB_UVESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not setCONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not setCONFIG_FB_LE80578=yCONFIG_FB_CARILLO_RANCH=yCONFIG_FB_INTEL=yCONFIG_FB_INTEL_DEBUG=yCONFIG_FB_INTEL_I2C=yCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not setCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not setCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_ATY128=yCONFIG_FB_ATY128_BACKLIGHT=yCONFIG_FB_ATY=yCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not setCONFIG_FB_S3=yCONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not setCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not setCONFIG_FB_SIS_315=yCONFIG_FB_VIA=yCONFIG_FB_NEOMAGIC=yCONFIG_FB_KYRO=yCONFIG_FB_3DFX=yCONFIG_FB_3DFX_ACCEL=yCONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_VT8623=yCONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not setCONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not setCONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not setCONFIG_FB_GEODE_GX=yCONFIG_FB_GEODE_GX1=y
# CONFIG_FB_TMIO is not setCONFIG_XEN_FBDEV_FRONTEND=yCONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not setCONFIG_FB_BROADSHEET=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not setCONFIG_LCD_TDO24M=y
# CONFIG_LCD_VGG2432A4 is not setCONFIG_LCD_PLATFORM=yCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not setCONFIG_BACKLIGHT_PROGEAR=yCONFIG_BACKLIGHT_CARILLO_RANCH=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not setCONFIG_BACKLIGHT_SAHARA=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not setCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=yCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_RAWMIDI=yCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=yCONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not setCONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not setCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_HRTIMER=y
# CONFIG_SND_SEQ_HRTIMER_DEFAULT is not setCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not setCONFIG_SND_PCM_XRUN_DEBUG=yCONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not setCONFIG_SND_MPU401_UART=yCONFIG_SND_DRIVERS=yCONFIG_SND_PCSP=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not setCONFIG_SND_MTS64=yCONFIG_SND_SERIAL_U16550=yCONFIG_SND_MPU401=yCONFIG_SND_PORTMAN2X4=y
# CONFIG_SND_PCI is not setCONFIG_SND_SPI=y
# CONFIG_SND_USB is not setCONFIG_SND_SOC=yCONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not setCONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not setCONFIG_HID_SUPPORT=yCONFIG_HID=yCONFIG_HID_DEBUG=yCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=yCONFIG_USB_MOUSE=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not setCONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not setCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not setCONFIG_HID_KYE=yCONFIG_HID_GYRATION=y
# CONFIG_HID_KENSINGTON is not setCONFIG_HID_LOGITECH=yCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=yCONFIG_PANTHERLORD_FF=yCONFIG_HID_PETALYNX=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=yCONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not setCONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not setCONFIG_HID_WACOM=y
# CONFIG_HID_ZEROPLUS is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not setCONFIG_USB_OTG_BLACKLIST_HUB=yCONFIG_USB_MON=yCONFIG_USB_WUSB=yCONFIG_USB_WUSB_CBAF=yCONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_OXU210HP_HCD=yCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=yCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_SL811_HCD=yCONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
#
# USB port drivers
#CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not setCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not setCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not setCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not setCONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not setCONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=yCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_NOP_USB_XCEIV=yCONFIG_UWB=yCONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_WLP is not set
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=yCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=yCONFIG_MEMSTICK_JMICRON_38X=yCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not setCONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_LP3944 is not setCONFIG_LEDS_CLEVO_MAIL=yCONFIG_LEDS_PCA955X=yCONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y CONFIG_INFINIBAND=y # CONFIG_INFINIBAND_USER_MAD is not set # CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_ADDR_TRANS=y # CONFIG_INFINIBAND_MTHCA is not set CONFIG_INFINIBAND_IPATH=y CONFIG_INFINIBAND_AMSO1100=y # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set # CONFIG_INFINIBAND_CXGB3 is not set CONFIG_MLX4_INFINIBAND=y CONFIG_INFINIBAND_NES=y # CONFIG_INFINIBAND_NES_DEBUG is not set CONFIG_INFINIBAND_IPOIB=y CONFIG_INFINIBAND_IPOIB_CM=y # CONFIG_INFINIBAND_IPOIB_DEBUG is not set CONFIG_INFINIBAND_SRP=y # CONFIG_INFINIBAND_ISER is not set CONFIG_EDAC=y
#
# Reporting subsystems
#CONFIG_EDAC_DEBUG=yCONFIG_EDAC_DEBUG_VERBOSE=y
# CONFIG_EDAC_MM_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not setCONFIG_RTC_DRV_DS1672=yCONFIG_RTC_DRV_MAX6900=yCONFIG_RTC_DRV_RS5C372=yCONFIG_RTC_DRV_ISL1208=yCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF8563=yCONFIG_RTC_DRV_PCF8583=yCONFIG_RTC_DRV_M41T80=yCONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_TWL4030 is not setCONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=yCONFIG_RTC_DRV_DS1305=yCONFIG_RTC_DRV_DS1390=yCONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_R9701 is not setCONFIG_RTC_DRV_RS5C348=yCONFIG_RTC_DRV_DS3234=y
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=yCONFIG_RTC_DRV_DS1511=yCONFIG_RTC_DRV_DS1553=yCONFIG_RTC_DRV_DS1742=yCONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not setCONFIG_RTC_DRV_M48T35=yCONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_BQ4802 is not setCONFIG_RTC_DRV_V3020=yCONFIG_RTC_DRV_PCF50633=y
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not setCONFIG_UIO=yCONFIG_UIO_CIF=yCONFIG_UIO_PDRV=yCONFIG_UIO_PDRV_GENIRQ=yCONFIG_UIO_SMX=yCONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
#
# TI VLYNQ
#
# CONFIG_XEN_BALLOON is not setCONFIG_XEN_DEV_EVTCHN=yCONFIG_XENFS=y
# CONFIG_XEN_COMPAT_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not setCONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not setCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=y
#
# File systems
#
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not setCONFIG_GFS2_FS=yCONFIG_GFS2_FS_LOCKING_DLM=yCONFIG_OCFS2_FS=yCONFIG_OCFS2_FS_O2CB=yCONFIG_OCFS2_FS_USERSPACE_CLUSTER=yCONFIG_OCFS2_FS_STATS=yCONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not setCONFIG_OCFS2_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not setCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QUOTA_TREE=yCONFIG_QFMT_V1=yCONFIG_QFMT_V2=yCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not setCONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not setCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=yCONFIG_ADFS_FS=yCONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not setCONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not setCONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_EFS_FS=yCONFIG_CRAMFS=yCONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_EMBEDDED is not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not setCONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_FS_WRITE=yCONFIG_UFS_DEBUG=yCONFIG_EXOFS_FS=y
# CONFIG_EXOFS_DEBUG is not setCONFIG_NILFS2_FS=yCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=yCONFIG_NFS_V4_1=yCONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_V4 is not setCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_SUNRPC_XPRT_RDMA=yCONFIG_RPCSEC_GSS_KRB5=yCONFIG_RPCSEC_GSS_SPKM3=y
# CONFIG_SMB_FS is not setCONFIG_CIFS=yCONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_UPCALL=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_DFS_UPCALL=yCONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not setCONFIG_CODA_FS=yCONFIG_AFS_FS=yCONFIG_AFS_DEBUG=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=yCONFIG_ACORN_PARTITION_POWERTEC=yCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=yCONFIG_LDM_DEBUG=yCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not setCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not setCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not setCONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not setCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not setCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not setCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=yCONFIG_DLM=yCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ALLOW_WARNINGS=yCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=yCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=yCONFIG_SLUB_STATS=yCONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not setCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not setCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_DETECTOR=yCONFIG_BACKTRACE_SELF_TEST=yCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=yCONFIG_FAIL_IO_TIMEOUT=yCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_PREEMPT_TRACER=yCONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not setCONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_POWER_TRACER=yCONFIG_KSYM_TRACER=yCONFIG_PROFILE_KSYM_TRACER=y
# CONFIG_STACK_TRACER is not setCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=yCONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not setCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not setCONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not setCONFIG_SAMPLES=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not setCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not setCONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=yCONFIG_IOMMU_STRESS=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not setCONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=1CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not setCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=yCONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_SECURITY_SELINUX=yCONFIG_SECURITY_SELINUX_BOOTPARAM=yCONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not setCONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_AVC_STATS is not setCONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_TOMOYO is not setCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=yCONFIG_CRYPTO_FPU=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not setCONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not setCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=yCONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not setCONFIG_CRYPTO_SALSA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=yCONFIG_CRYPTO_DEV_PADLOCK_AES=y
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not setCONFIG_CRYPTO_DEV_HIFN_795X=yCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=yCONFIG_KVM_INTEL=yCONFIG_KVM_AMD=yCONFIG_KVM_TRACE=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_64=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
[ 0.000000] Linux version 2.6.31-rc5-tip-00896-g6efa9e9-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #718 SMP PREEMPT Tue Aug 4 11:30:30 CEST 2009 [ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] 0000000000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000043fff] [ 0.000000] bootmap [0000000000044000 - 000000000004bfff] pages 8 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0007cd4058] TEXT DATA BSS ==> [0001000000 - 0007cd4058] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0007cd5000 - 0007cd5149] BRK ==> [0007cd5000 - 0007cd5149] [ 0.000000] #5 [0000100000 - 0000300000] PGTABLE ==> [0000100000 - 0000300000] [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680 [ 0.000000] mpc: f1400-f152c [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] DMA zone: 104 pages used for memmap [ 0.000000] DMA zone: 611 pages reserved [ 0.000000] DMA zone: 3268 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6552 pages used for memmap [ 0.000000] DMA32 zone: 251480 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is PCI [ 0.000000] Bus #6 is ISA [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 480 pages at ffff880007cee000, static data 1942408 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 254748 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] debug: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 903748k/1048512k available (15689k kernel code, 452k absent, 144312k reserved, 9369k data, 3384k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.391 MHz processor. [ 0.000035] spurious 8259A interrupt: IRQ7. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [ttyS0] enabled, bootconsole disabled [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000999] ... CLASSHASH_SIZE: 4096 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000999] ... CHAINHASH_SIZE: 16384 [ 0.000999] memory used by lock dependency info: 6367 kB [ 0.000999] per task-struct memory footprint: 2688 bytes [ 0.000999] ODEBUG: 11 of 11 active objects replaced [ 0.000999] ODEBUG: selftest passed [ 0.001040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.78 BogoMIPS (lpj=2010391) [ 0.004503] Security Framework initialized [ 0.005013] SELinux: Disabled at boot. [ 0.007294] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.009469] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.010487] Mount-cache hash table entries: 256 [ 0.013668] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.014008] CPU: L2 Cache: 512K (64 bytes/line) [ 0.015009] CPU 0/0x0 -> Node 0 [ 0.016006] tseg: 0000000000 [ 0.017030] CPU: Physical Processor ID: 0 [ 0.018005] CPU: Processor Core ID: 0 [ 0.019007] mce: CPU supports 5 MCE banks [ 0.020024] Performance Counters: AMD PMU driver. [ 0.022015] ... version: 0 [ 0.023005] ... bit width: 48 [ 0.024004] ... generic counters: 4 [ 0.025004] ... value mask: 0000ffffffffffff [ 0.026004] ... max period: 00007fffffffffff [ 0.027004] ... fixed-purpose counters: 0 [ 0.028003] ... counter mask: 000000000000000f [ 0.031192] debug: unmapping init memory ffffffff8287c000..ffffffff8288f000 [ 0.032473] Setting APIC routing to flat [ 0.033008] enabled ExtINT on CPU#0 [ 0.034067] ExtINT not setup in hardware but reported by MP table [ 0.035116] ENABLING IO-APIC IRQs [ 0.036003] init IO_APIC IRQs [ 0.037002] 2-0 (apicid-pin) not connected [ 0.039051] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.040022] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.041018] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 0.041993] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 0.041993] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 0.041993] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.041993] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.041993] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.041993] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.041993] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.041993] ..... (found apic 0 pin 0) ... [ 0.052859] ....... works. [ 0.052998] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.055998] Using local APIC timer interrupts. [ 0.056000] calibrating APIC timer ... [ 0.057991] ... lapic delta = 1256253 [ 0.057991] ..... delta 1256253 [ 0.057991] ..... mult: 53963858 [ 0.057991] ..... calibration result: 201000 [ 0.057991] ..... CPU clock speed is 2010.0004 MHz. [ 0.057991] ..... host bus clock speed is 201.0000 MHz. [ 0.057991] ... verify APIC timer [ 0.160718] ... jiffies delta = 100 [ 0.160981] ... jiffies result ok [ 0.162008] calling migration_init+0x0/0x7b @ 1 [ 0.163326] initcall migration_init+0x0/0x7b returned 0 after 0 usecs [ 0.163983] calling spawn_ksoftirqd+0x0/0x7b @ 1 [ 0.165143] initcall spawn_ksoftirqd+0x0/0x7b returned 0 after 0 usecs [ 0.165983] calling init_call_single_data+0x0/0xd4 @ 1 [ 0.166989] initcall init_call_single_data+0x0/0xd4 returned 0 after 0 usecs [ 0.167982] calling spawn_softlockup_task+0x0/0x97 @ 1 [ 0.169086] initcall spawn_softlockup_task+0x0/0x97 returned 0 after 0 usecs [ 0.169982] calling relay_init+0x0/0x2d @ 1 [ 0.170981] initcall relay_init+0x0/0x2d returned 0 after 0 usecs [ 0.171993] calling tracer_alloc_buffers+0x0/0x2b5 @ 1 [ 0.173252] Testing tracer nop: PASSED [ 0.174989] initcall tracer_alloc_buffers+0x0/0x2b5 returned 0 after 1952 usecs [ 0.175981] calling init_trace_printk+0x0/0x2d @ 1 [ 0.176980] initcall init_trace_printk+0x0/0x2d returned 0 after 0 usecs [ 0.177980] calling trace_workqueue_early_init+0x0/0x164 @ 1 [ 0.180002] initcall trace_workqueue_early_init+0x0/0x164 returned 0 after 976 usecs [ 0.183070] lockdep: fixing up alternatives. [ 0.184170] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] masked ExtINT on CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009954) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 5 MCE banks [ 0.256043] CPU1: [ 0.255973] ------------[ cut here ]------------ [ 0.255982] WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x45/0x100() [ 0.255986] Hardware name: System Product Name [ 0.255990] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip-00896-g6efa9e9-dirty #718 [ 0.255994] Call Trace: [ 0.255996] <IRQ> [<ffffffff810d6b91>] ? __rcu_process_callbacks+0x45/0x100 [ 0.256007] [<ffffffff810889ae>] warn_slowpath_common+0x88/0xcb [ 0.256014] [<ffffffff81083cad>] ? scheduler_tick+0x123/0x26c [ 0.256019] [<ffffffff81088a18>] warn_slowpath_null+0x27/0x3d [ 0.256024] [<ffffffff810d6b91>] __rcu_process_callbacks+0x45/0x100 [ 0.256029] [<ffffffff810d6c98>] rcu_process_callbacks+0x4c/0x88 [ 0.256036] [<ffffffff81090501>] __do_softirq+0x14d/0x25b [ 0.256042] [<ffffffff8103d55c>] call_softirq+0x1c/0x30 [ 0.256048] [<ffffffff8103f8ca>] do_softirq+0x5e/0xcf [ 0.256053] [<ffffffff8108fcdd>] irq_exit+0x5d/0xc5 [ 0.256059] [<ffffffff81f4f731>] smp_apic_timer_interrupt+0x9e/0xc2 [ 0.256064] [<ffffffff8103cf23>] apic_timer_interrupt+0x13/0x20 [ 0.256067] <EOI> [<ffffffff8105bff1>] ? native_safe_halt+0xb/0xd [ 0.256077] [<ffffffff8105bfef>] ? native_safe_halt+0x9/0xd [ 0.256082] [<ffffffff810458d5>] ? default_idle+0x55/0x94 [ 0.256087] [<ffffffff8103b24b>] ? enter_idle+0x38/0x4e [ 0.256092] [<ffffffff8103b324>] ? cpu_idle+0xc3/0x11f [ 0.256098] [<ffffffff828f82db>] ? start_secondary+0xcb/0xe6 [ 0.256129] ---[ end trace 93d72a36b9146f22 ]--- [ 0.256968] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.259001] Brought up 2 CPUs [ 0.259968] Total of 2 processors activated (8040.69 BogoMIPS). [ 0.262319] CPU0 attaching sched-domain: [ 0.262972] domain 0: span 0-1 level MC [ 0.264966] groups: 0 1 [ 0.266967] CPU1 attaching sched-domain: [ 0.267970] domain 0: span 0-1 level MC [ 0.269965] groups: 1 0 [ 0.272857] khelper used greatest stack depth: 4720 bytes left [ 0.280843] calling init_cpufreq_transition_notifier_list+0x0/0x42 @ 1 [ 0.280973] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs [ 0.281965] calling net_ns_init+0x0/0x11b @ 1 [ 0.283015] initcall net_ns_init+0x0/0x11b returned 0 after 0 usecs [ 0.284041] calling cpufreq_tsc+0x0/0x28 @ 1 [ 0.284964] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs [ 0.285963] calling pci_reboot_init+0x0/0x3b @ 1 [ 0.286964] initcall pci_reboot_init+0x0/0x3b returned 0 after 0 usecs [ 0.288012] calling print_banner+0x0/0xe @ 1 [ 0.288962] Booting paravirtualized kernel on bare hardware [ 0.289963] initcall print_banner+0x0/0xe returned 0 after 976 usecs [ 0.290963] calling init_smp_flush+0x0/0x68 @ 1 [ 0.292012] initcall init_smp_flush+0x0/0x68 returned 0 after 0 usecs [ 0.292962] calling sysctl_init+0x0/0x3d @ 1 [ 0.293969] initcall sysctl_init+0x0/0x3d returned 0 after 0 usecs [ 0.294962] calling ksysfs_init+0x0/0xe4 @ 1 [ 0.296198] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs [ 0.297032] calling async_init+0x0/0x69 @ 1 [ 0.297961] initcall async_init+0x0/0x69 returned 0 after 0 usecs [ 0.298961] calling init_jiffies_clocksource+0x0/0x39 @ 1 [ 0.300013] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs [ 0.301963] calling init_hw_breakpoint+0x0/0x39 @ 1 [ 0.302964] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs [ 0.303960] calling filelock_init+0x0/0x55 @ 1 [ 0.305054] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs [ 0.305960] calling init_script_binfmt+0x0/0x3b @ 1 [ 0.306981] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.307959] calling init_elf_binfmt+0x0/0x3b @ 1 [ 0.309009] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.309959] calling init_compat_elf_binfmt+0x0/0x3b @ 1 [ 0.310960] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.311960] calling debugfs_init+0x0/0x80 @ 1 [ 0.313020] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs [ 0.313959] calling securityfs_init+0x0/0x77 @ 1 [ 0.314970] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs [ 0.315959] calling random32_init+0x0/0xff @ 1 [ 0.317027] initcall random32_init+0x0/0xff returned 0 after 0 usecs [ 0.318000] calling gnttab_init+0x0/0x1a8 @ 1 [ 0.319004] initcall gnttab_init+0x0/0x1a8 returned -19 after 0 usecs [ 0.320006] calling cpufreq_core_init+0x0/0xaa @ 1 [ 0.321056] initcall cpufreq_core_init+0x0/0xaa returned 0 after 0 usecs [ 0.322006] calling cpuidle_init+0x0/0x66 @ 1 [ 0.323024] initcall cpuidle_init+0x0/0x66 returned 0 after 0 usecs [ 0.324007] calling sock_init+0x0/0x80 @ 1 [ 0.326336] initcall sock_init+0x0/0x80 returned 0 after 976 usecs [ 0.327008] calling netpoll_init+0x0/0x69 @ 1 [ 0.328008] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs [ 0.329056] calling netlink_proto_init+0x0/0x169 @ 1 [ 0.330110] NET: Registered protocol family 16 [ 0.332072] initcall netlink_proto_init+0x0/0x169 returned 0 after 1953 usecs [ 0.333056] calling bdi_class_init+0x0/0x68 @ 1 [ 0.335579] initcall bdi_class_init+0x0/0x68 returned 0 after 976 usecs [ 0.336063] calling kobject_uevent_init+0x0/0x7b @ 1 [ 0.337032] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs [ 0.338007] calling pcibus_class_init+0x0/0x40 @ 1 [ 0.339149] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs [ 0.340124] calling pci_driver_init+0x0/0x39 @ 1 [ 0.342079] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs [ 0.343083] calling lcd_class_init+0x0/0x74 @ 1 [ 0.344080] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs [ 0.345061] calling backlight_class_init+0x0/0x84 @ 1 [ 0.346248] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs [ 0.347057] calling video_output_class_init+0x0/0x40 @ 1 [ 0.348078] initcall video_output_class_init+0x0/0x40 returned 0 after 0 usecs [ 0.349012] calling xenbus_probe_init+0x0/0xe4 @ 1 [ 0.350007] initcall xenbus_probe_init+0x0/0xe4 returned -19 after 0 usecs [ 0.351007] calling tty_class_init+0x0/0x58 @ 1 [ 0.352092] initcall tty_class_init+0x0/0x58 returned 0 after 0 usecs [ 0.353063] calling vtconsole_class_init+0x0/0xe8 @ 1 [ 0.354193] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 0 usecs [ 0.355063] calling register_node_type+0x0/0xa4 @ 1 [ 0.357121] initcall register_node_type+0x0/0xa4 returned 0 after 976 usecs [ 0.358084] calling spi_init+0x0/0xd4 @ 1 [ 0.359125] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs [ 0.360060] calling i2c_init+0x0/0x8c @ 1 [ 0.362140] i2c-core: driver [dummy] registered [ 0.363119] initcall i2c_init+0x0/0x8c returned 0 after 1953 usecs [ 0.364008] calling amd_postcore_init+0x0/0xa3 @ 1 [ 0.365010] node 0 link 0: io port [1000, fffff] [ 0.366007] TOM: 0000000040000000 aka 1024M [ 0.367007] node 0 link 0: mmio [e0000000, efffffff] [ 0.368197] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.369197] node 0 link 0: mmio [a0000, bffff] [ 0.371060] node 0 link 0: mmio [40000000, fed3ffff] [ 0.373006] bus: [00,ff] on node 0 link 0 [ 0.374006] bus: 00 index 0 io port: [0, ffff] [ 0.375054] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.376006] bus: 00 index 2 mmio: [feb00000, fec0ffff] [ 0.377006] bus: 00 index 3 mmio: [a0000, bffff] [ 0.378007] initcall amd_postcore_init+0x0/0xa3 returned 0 after 12695 usecs [ 0.379056] calling arch_kdebugfs_init+0x0/0x55 @ 1 [ 0.380111] initcall arch_kdebugfs_init+0x0/0x55 returned 0 after 0 usecs [ 0.381007] calling dmi_id_init+0x0/0xf7 @ 1 [ 0.382297] initcall dmi_id_init+0x0/0xf7 returned 0 after 0 usecs [ 0.383157] calling pci_arch_init+0x0/0x67 @ 1 [ 0.384012] PCI: Using configuration type 1 for base access [ 0.385014] initcall pci_arch_init+0x0/0x67 returned 0 after 976 usecs [ 0.386007] calling topology_init+0x0/0xe0 @ 1 [ 0.388208] initcall topology_init+0x0/0xe0 returned 0 after 976 usecs [ 0.390019] calling param_sysfs_init+0x0/0xf6 @ 1 [ 0.599249] initcall param_sysfs_init+0x0/0xf6 returned 0 after 203125 usecs [ 0.600150] calling audit_watch_init+0x0/0x46 @ 1 [ 0.601031] audit: cannot initialize inotify handle [ 0.602007] initcall audit_watch_init+0x0/0x46 returned 0 after 976 usecs [ 0.603007] calling init_slow_work+0x0/0x5f @ 1 [ 0.604056] initcall init_slow_work+0x0/0x5f returned 0 after 0 usecs [ 0.605007] calling default_bdi_init+0x0/0x5e @ 1 [ 0.606197] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs [ 0.607173] calling init_bio+0x0/0x100 @ 1 [ 0.609193] bio: create slab <bio-0> at 0 [ 0.610106] initcall init_bio+0x0/0x100 returned 0 after 1953 usecs [ 0.611057] calling fsnotify_init+0x0/0x39 @ 1 [ 0.612011] initcall fsnotify_init+0x0/0x39 returned 0 after 0 usecs [ 0.613007] calling fsnotify_notification_init+0x0/0x129 @ 1 [ 0.614087] initcall fsnotify_notification_init+0x0/0x129 returned 0 after 0 usecs [ 0.616010] calling cryptomgr_init+0x0/0x39 @ 1 [ 0.617008] initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs [ 0.618008] calling blk_settings_init+0x0/0x51 @ 1 [ 0.619056] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs [ 0.620007] calling blk_ioc_init+0x0/0x51 @ 1 [ 0.621091] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs [ 0.622008] calling blk_softirq_init+0x0/0x8f @ 1 [ 0.623056] initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs [ 0.624007] calling genhd_device_init+0x0/0x8c @ 1 [ 0.626382] initcall genhd_device_init+0x0/0x8c returned 0 after 976 usecs [ 0.627178] calling pci_slot_init+0x0/0x73 @ 1 [ 0.629023] initcall pci_slot_init+0x0/0x73 returned 0 after 0 usecs [ 0.630008] calling fbmem_init+0x0/0xb8 @ 1 [ 0.632106] initcall fbmem_init+0x0/0xb8 returned 0 after 976 usecs [ 0.633094] calling setup_shutdown_event+0x0/0x3b @ 1 [ 0.634008] initcall setup_shutdown_event+0x0/0x3b returned 0 after 0 usecs [ 0.635007] calling misc_init+0x0/0xd6 @ 1 [ 0.637145] initcall misc_init+0x0/0xd6 returned 0 after 976 usecs [ 0.638060] calling cn_init+0x0/0x11a @ 1 [ 0.639097] initcall cn_init+0x0/0x11a returned 0 after 0 usecs [ 0.640008] calling tifm_init+0x0/0xab @ 1 [ 0.642345] initcall tifm_init+0x0/0xab returned 0 after 976 usecs [ 0.643065] calling wm8400_module_init+0x0/0x59 @ 1 [ 0.645160] i2c-core: driver [WM8400] registered [ 0.646085] initcall wm8400_module_init+0x0/0x59 returned 0 after 1953 usecs [ 0.647007] calling twl4030_init+0x0/0x3b @ 1 [ 0.648139] i2c-core: driver [twl4030] registered [ 0.649062] initcall twl4030_init+0x0/0x3b returned 0 after 976 usecs [ 0.650007] calling pcf50633_init+0x0/0x3b @ 1 [ 0.651208] i2c-core: driver [pcf50633] registered [ 0.652060] initcall pcf50633_init+0x0/0x3b returned 0 after 976 usecs [ 0.653007] calling ab3100_i2c_init+0x0/0x3b @ 1 [ 0.655219] i2c-core: driver [ab3100] registered [ 0.656010] initcall ab3100_i2c_init+0x0/0x3b returned 0 after 1953 usecs [ 0.657007] calling init_scsi+0x0/0xb7 @ 1 [ 0.660290] SCSI subsystem initialized [ 0.661068] initcall init_scsi+0x0/0xb7 returned 0 after 2929 usecs [ 0.663009] calling ata_init+0x0/0xb4 @ 1 [ 0.664492] libata version 3.00 loaded. [ 0.665181] initcall ata_init+0x0/0xb4 returned 0 after 976 usecs [ 0.666007] calling phy_init+0x0/0x57 @ 1 [ 0.668298] initcall phy_init+0x0/0x57 returned 0 after 976 usecs [ 0.669069] calling init_pcmcia_cs+0x0/0x56 @ 1 [ 0.670112] initcall init_pcmcia_cs+0x0/0x56 returned 0 after 0 usecs [ 0.671124] calling nop_usb_xceiv_init+0x0/0x39 @ 1 [ 0.672121] initcall nop_usb_xceiv_init+0x0/0x39 returned 0 after 0 usecs [ 0.673085] calling usb_init+0x0/0x199 @ 1 [ 0.675302] usbcore: registered new interface driver usbfs [ 0.677247] usbcore: registered new interface driver hub [ 0.679198] usbcore: registered new device driver usb [ 0.680061] initcall usb_init+0x0/0x199 returned 0 after 5859 usecs [ 0.681007] calling serio_init+0x0/0xb2 @ 1 [ 0.682138] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs [ 0.683060] calling gameport_init+0x0/0xb2 @ 1 [ 0.684148] initcall gameport_init+0x0/0xb2 returned 0 after 0 usecs [ 0.685013] calling input_init+0x0/0x15d @ 1 [ 0.686084] initcall input_init+0x0/0x15d returned 0 after 0 usecs [ 0.687010] calling rtc_init+0x0/0x98 @ 1 [ 0.689068] initcall rtc_init+0x0/0x98 returned 0 after 976 usecs [ 0.690010] calling pps_init+0x0/0xd7 @ 1 [ 0.691226] LinuxPPS API ver. 1 registered [ 0.692008] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.693008] initcall pps_init+0x0/0xd7 returned 0 after 1953 usecs [ 0.694007] calling power_supply_class_init+0x0/0x5f @ 1 [ 0.696094] initcall power_supply_class_init+0x0/0x5f returned 0 after 976 usecs [ 0.697007] calling hwmon_init+0x0/0x6e @ 1 [ 0.699113] initcall hwmon_init+0x0/0x6e returned 0 after 976 usecs [ 0.700007] calling md_init+0x0/0xf7 @ 1 [ 0.701037] initcall md_init+0x0/0xf7 returned 0 after 0 usecs [ 0.702007] calling leds_init+0x0/0x67 @ 1 [ 0.703264] initcall leds_init+0x0/0x67 returned 0 after 0 usecs [ 0.704010] calling pci_subsys_init+0x0/0x136 @ 1 [ 0.705005] PCI: Probing PCI hardware [ 0.706069] PCI: Probing PCI hardware (bus 00) [ 0.708297] PCI: Scanning bus 0000:00 [ 0.710085] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00 [ 0.711096] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.712106] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00 [ 0.714052] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xec [ 0.715006] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.716007] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.717093] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00 [ 0.718032] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 0.719035] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.720014] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.721067] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.722029] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.723010] pci 0000:00:01.1: PME# disabled [ 0.724069] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00 [ 0.725082] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff] [ 0.726053] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.727029] pci 0000:00:02.0: supports D1 D2 [ 0.728006] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.730011] pci 0000:00:02.0: PME# disabled [ 0.731047] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00 [ 0.732040] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.734055] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.735040] pci 0000:00:02.1: supports D1 D2 [ 0.736007] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.737058] pci 0000:00:02.1: PME# disabled [ 0.739054] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00 [ 0.740032] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff] [ 0.741062] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff] [ 0.742014] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff] [ 0.743040] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.744029] pci 0000:00:04.0: supports D1 D2 [ 0.745095] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00 [ 0.746058] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.747028] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.749086] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01 [ 0.750034] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.751044] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00 [ 0.752032] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff] [ 0.753064] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007] [ 0.754046] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.755029] pci 0000:00:0a.0: supports D1 D2 [ 0.756006] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.757058] pci 0000:00:0a.0: PME# disabled [ 0.758098] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01 [ 0.759048] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.760049] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761058] pci 0000:00:0b.0: PME# disabled [ 0.763056] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01 [ 0.764047] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.765097] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.766010] pci 0000:00:0c.0: PME# disabled [ 0.767062] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01 [ 0.768047] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.769098] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.770010] pci 0000:00:0d.0: PME# disabled [ 0.771062] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01 [ 0.772047] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.773096] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.774010] pci 0000:00:0e.0: PME# disabled [ 0.775090] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00 [ 0.776059] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.777104] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00 [ 0.778059] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.779037] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00 [ 0.780059] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1dd [ 0.781085] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00 [ 0.782061] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1dd [ 0.783062] PCI: Fixups for bus 0000:00 [ 0.784009] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0 [ 0.785073] PCI: Scanning bus 0000:05 [ 0.786065] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00 [ 0.787036] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff] [ 0.788015] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff] [ 0.789102] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.790032] pci 0000:05:07.0: supports D1 D2 [ 0.791006] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 0.792010] pci 0000:05:07.0: PME# disabled [ 0.793169] PCI: Fixups for bus 0000:05 [ 0.794006] pci 0000:00:09.0: transparent bridge [ 0.795010] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 0.796010] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 0.797058] PCI: Bus scan for 0000:05 returning with max=05 [ 0.798011] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0 [ 0.799024] PCI: Scanning bus 0000:04 [ 0.801152] PCI: Fixups for bus 0000:04 [ 0.803025] PCI: Bus scan for 0000:04 returning with max=04 [ 0.804011] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0 [ 0.805072] PCI: Scanning bus 0000:03 [ 0.806143] PCI: Fixups for bus 0000:03 [ 0.807024] PCI: Bus scan for 0000:03 returning with max=03 [ 0.808011] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0 [ 0.809072] PCI: Scanning bus 0000:02 [ 0.810142] PCI: Fixups for bus 0000:02 [ 0.811023] PCI: Bus scan for 0000:02 returning with max=02 [ 0.812011] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0 [ 0.813072] PCI: Scanning bus 0000:01 [ 0.814038] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00 [ 0.815019] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x47 [ 0.816019] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.817063] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 0.818015] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff] [ 0.820020] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.821060] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.822043] pci 0000:01:00.0: supports D1 D2 [ 0.823057] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00 [ 0.824019] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x47 [ 0.825065] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff] [ 0.826060] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.827039] pci 0000:01:00.1: supports D1 D2 [ 0.828119] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.829272] PCI: Fixups for bus 0000:01 [ 0.830014] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff] [ 0.831010] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.832014] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.833054] PCI: Bus scan for 0000:01 returning with max=01 [ 0.834011] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1 [ 0.835013] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1 [ 0.836013] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1 [ 0.837061] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1 [ 0.838013] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1 [ 0.839011] PCI: Bus scan for 0000:00 returning with max=05 [ 0.852354] pci 0000:00:00.0: default IRQ router [10de:005e] [ 0.853584] initcall pci_subsys_init+0x0/0x136 returned 0 after 144531 usecs [ 0.854008] calling proto_init+0x0/0x39 @ 1 [ 0.855027] initcall proto_init+0x0/0x39 returned 0 after 0 usecs [ 0.856056] calling net_dev_init+0x0/0x1c2 @ 1 [ 0.859245] initcall net_dev_init+0x0/0x1c2 returned 0 after 1953 usecs [ 0.860008] calling neigh_init+0x0/0x98 @ 1 [ 0.861009] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs [ 0.862008] calling fib_rules_init+0x0/0xcc @ 1 [ 0.863061] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs [ 0.864007] calling genl_init+0x0/0x100 @ 1 [ 0.867139] initcall genl_init+0x0/0x100 returned 0 after 1953 usecs [ 0.868015] calling cipso_v4_init+0x0/0xae @ 1 [ 0.869032] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs [ 0.870008] calling irda_init+0x0/0xb8 @ 1 [ 0.871104] NET: Registered protocol family 23 [ 0.872204] initcall irda_init+0x0/0xb8 returned 0 after 976 usecs [ 0.873008] calling bt_init+0x0/0x81 @ 1 [ 0.874006] Bluetooth: Core ver 2.15 [ 0.875163] NET: Registered protocol family 31 [ 0.876057] Bluetooth: HCI device and connection manager initialized [ 0.877040] Bluetooth: HCI socket layer initialized [ 0.878008] initcall bt_init+0x0/0x81 returned 0 after 3906 usecs [ 0.879008] calling wireless_nlevent_init+0x0/0x69 @ 1 [ 0.880064] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs [ 0.881008] calling cfg80211_init+0x0/0x9f @ 1 [ 0.887211] cfg80211: Using static regulatory domain info [ 0.888057] cfg80211: Regulatory domain: US [ 0.889006] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.890007] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.891006] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.893008] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.894007] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.895006] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.896055] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.897137] cfg80211: Calling CRDA for country: US [ 0.898290] initcall cfg80211_init+0x0/0x9f returned 0 after 15625 usecs [ 0.899058] calling ieee80211_init+0x0/0x3b @ 1 [ 0.900042] initcall ieee80211_init+0x0/0x3b returned 0 after 0 usecs [ 0.901007] calling netlbl_init+0x0/0xa8 @ 1 [ 0.902006] NetLabel: Initializing [ 0.903053] NetLabel: domain hash size = 128 [ 0.904005] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.906030] NetLabel: unlabeled traffic allowed by default [ 0.907057] initcall netlbl_init+0x0/0xa8 returned 0 after 4882 usecs [ 0.908008] calling rfkill_init+0x0/0xb1 @ 1 [ 0.910202] initcall rfkill_init+0x0/0xb1 returned 0 after 976 usecs [ 0.911058] calling sysctl_init+0x0/0x6f @ 1 [ 0.912012] initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs [ 0.913008] calling pci_iommu_init+0x0/0x39 @ 1 [ 0.914008] initcall pci_iommu_init+0x0/0x39 returned 0 after 0 usecs [ 0.915056] calling print_all_ICs+0x0/0xbf @ 1 [ 0.916006] [ 0.916007] printing PIC contents [ 0.917008] ... PIC IMR: fffa [ 0.918000] ... PIC IRR: 0001 [ 0.918005] ... PIC ISR: 0001 [ 0.919055] ... PIC ELCR: 0828 [ 0.920007] printing local APIC contents on CPU#0/0: [ 0.921000] ... APIC ID: 00000000 (0) [ 0.921000] ... APIC VERSION: 00040010 [ 0.921000] ... APIC TASKPRI: 00000000 (00) [ 0.921000] ... APIC ARBPRI: 000000e0 (e0) [ 0.921000] ... APIC PROCPRI: 00000000 [ 0.921000] ... APIC LDR: 01000000 [ 0.921000] ... APIC DFR: ffffffff [ 0.921000] ... APIC SPIV: 000001ff [ 0.921000] ... APIC ISR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC TMR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC IRR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.921000] ... APIC ESR: 00000000 [ 0.921000] ... APIC ICR: 000008fd [ 0.921000] ... APIC ICR2: 02000000 [ 0.921000] ... APIC LVTT: 000200ef [ 0.921000] ... APIC LVTPC: 00000400 [ 0.921000] ... APIC LVT0: 00010700 [ 0.921000] ... APIC LVT1: 00000400 [ 0.921000] ... APIC LVTERR: 000000fe [ 0.921000] ... APIC TMICT: 00003112 [ 0.921000] ... APIC TMCCT: 000030e3 [ 0.921000] ... APIC TDCR: 00000003 [ 0.921000] [ 0.920999] printing local APIC contents on CPU#1/1: [ 0.921000] ... APIC ID: 01000000 (1) [ 0.921000] ... APIC VERSION: 00040010 [ 0.921000] ... APIC TASKPRI: 00000000 (00) [ 0.921000] ... APIC ARBPRI: 000000e0 (e0) [ 0.921000] ... APIC PROCPRI: 00000000 [ 0.921000] ... APIC LDR: 02000000 [ 0.921000] ... APIC DFR: ffffffff [ 0.921000] ... APIC SPIV: 000001ff [ 0.921000] ... APIC ISR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC TMR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC IRR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.921000] ... APIC ESR: 00000000 [ 0.921000] ... APIC ICR: 000008fd [ 0.921000] ... APIC ICR2: 01000000 [ 0.921000] ... APIC LVTT: 000200ef [ 0.921000] ... APIC LVTPC: 00010400 [ 0.921000] ... APIC LVT0: 00010700 [ 0.921000] ... APIC LVT1: 00010400 [ 0.921000] ... APIC LVTERR: 000000fe [ 0.921000] ... APIC TMICT: 00003112 [ 0.921000] ... APIC TMCCT: 0000098d [ 0.921000] ... APIC TDCR: 00000003 [ 0.921000] [ 1.027898] number of MP IRQ sources: 17. [ 1.028006] number of IO-APIC #2 registers: 24. [ 1.029006] testing the IO APIC....................... [ 1.030009] [ 1.031054] IO APIC #2...... [ 1.032006] .... register #00: 00000000 [ 1.033006] ....... : physical APIC id: 00 [ 1.034006] ....... : Delivery Type: 0 [ 1.035054] ....... : LTS : 0 [ 1.036006] .... register #01: 00170011 [ 1.037006] ....... : max redirection entries: 0017 [ 1.038006] ....... : PRQ implemented: 0 [ 1.039054] ....... : IO APIC version: 0011 [ 1.040006] .... register #02: 00000000 [ 1.041006] ....... : arbitration: 00 [ 1.042006] .... IRQ redirection table: [ 1.043053] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 1.044009] 00 003 0 0 0 0 0 1 1 30 [ 1.046008] 01 003 0 0 0 0 0 1 1 31 [ 1.048008] 02 000 1 0 0 0 0 0 0 00 [ 1.050008] 03 003 1 1 0 1 0 1 1 33 [ 1.052008] 04 003 0 0 0 0 0 1 1 34 [ 1.054008] 05 003 1 1 0 1 0 1 1 35 [ 1.056008] 06 003 0 0 0 0 0 1 1 36 [ 1.058008] 07 003 1 0 0 0 0 1 1 37 [ 1.060008] 08 003 0 0 0 0 0 1 1 38 [ 1.062008] 09 003 0 0 0 0 0 1 1 39 [ 1.064009] 0a 003 0 0 0 0 0 1 1 3A [ 1.066008] 0b 003 1 1 0 1 0 1 1 3B [ 1.068009] 0c 003 0 0 0 0 0 1 1 3C [ 1.070008] 0d 003 0 0 0 0 0 1 1 3D [ 1.072008] 0e 003 0 0 0 0 0 1 1 3E [ 1.074008] 0f 003 0 0 0 0 0 1 1 3F [ 1.076008] 10 000 1 0 0 0 0 0 0 00 [ 1.078008] 11 000 1 0 0 0 0 0 0 00 [ 1.080008] 12 000 1 0 0 0 0 0 0 00 [ 1.082008] 13 000 1 0 0 0 0 0 0 00 [ 1.084008] 14 000 1 0 0 0 0 0 0 00 [ 1.086008] 15 000 1 0 0 0 0 0 0 00 [ 1.089008] 16 000 1 0 0 0 0 0 0 00 [ 1.091058] 17 000 1 0 0 0 0 0 0 00 [ 1.093006] IRQ to pin mappings: [ 1.094006] IRQ0 -> 0:0 [ 1.096197] IRQ1 -> 0:1 [ 1.098006] IRQ3 -> 0:3 [ 1.100197] IRQ4 -> 0:4 [ 1.102195] IRQ5 -> 0:5 [ 1.104741] IRQ6 -> 0:6 [ 1.106195] IRQ7 -> 0:7 [ 1.108791] IRQ8 -> 0:8 [ 1.110197] IRQ9 -> 0:9 [ 1.111732] IRQ10 -> 0:10 [ 1.113197] IRQ11 -> 0:11 [ 1.115006] IRQ12 -> 0:12 [ 1.116873] IRQ13 -> 0:13 [ 1.118197] IRQ14 -> 0:14 [ 1.120247] IRQ15 -> 0:15 [ 1.122356] .................................... done. [ 1.123010] initcall print_all_ICs+0x0/0xbf returned 0 after 202148 usecs [ 1.124057] calling hpet_late_init+0x0/0xa6 @ 1 [ 1.125009] initcall hpet_late_init+0x0/0xa6 returned -19 after 0 usecs [ 1.126008] calling clocksource_done_booting+0x0/0x37 @ 1 [ 1.127008] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs [ 1.128056] calling ftrace_init_debugfs+0x0/0x56 @ 1 [ 1.129115] initcall ftrace_init_debugfs+0x0/0x56 returned 0 after 0 usecs [ 1.130008] calling rb_init_debugfs+0x0/0x56 @ 1 [ 1.131023] initcall rb_init_debugfs+0x0/0x56 returned 0 after 0 usecs [ 1.132056] calling tracer_init_debugfs+0x0/0x254 @ 1 [ 1.134729] initcall tracer_init_debugfs+0x0/0x254 returned 0 after 976 usecs [ 1.135008] calling init_trace_printk_function_export+0x0/0x56 @ 1 [ 1.136072] initcall init_trace_printk_function_export+0x0/0x56 returned 0 after 0 usecs [ 1.137008] calling stat_workqueue_init+0x0/0x54 @ 1 [ 1.138077] initcall stat_workqueue_init+0x0/0x54 returned 0 after 0 usecs [ 1.139008] calling event_trace_init+0x0/0x212 @ 1 [ 1.156079] initcall event_trace_init+0x0/0x212 returned 0 after 15625 usecs [ 1.157009] calling ksym_tracer_stat_init+0x0/0x54 @ 1 [ 1.158029] initcall ksym_tracer_stat_init+0x0/0x54 returned 0 after 0 usecs [ 1.159008] calling init_pipe_fs+0x0/0x72 @ 1 [ 1.161143] initcall init_pipe_fs+0x0/0x72 returned 0 after 976 usecs [ 1.162008] calling eventpoll_init+0x0/0x102 @ 1 [ 1.163171] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs [ 1.164057] calling anon_inode_init+0x0/0x150 @ 1 [ 1.166065] initcall anon_inode_init+0x0/0x150 returned 0 after 976 usecs [ 1.167010] calling blk_scsi_ioctl_init+0x0/0x2ad @ 1 [ 1.168057] initcall blk_scsi_ioctl_init+0x0/0x2ad returned 0 after 0 usecs [ 1.169008] calling chr_dev_init+0x0/0xca @ 1 [ 1.174288] initcall chr_dev_init+0x0/0xca returned 0 after 3906 usecs [ 1.176040] calling firmware_class_init+0x0/0x9f @ 1 [ 1.177116] initcall firmware_class_init+0x0/0x9f returned 0 after 0 usecs [ 1.178080] calling ieee1394_init+0x0/0x289 @ 1 [ 1.182193] initcall ieee1394_init+0x0/0x289 returned 0 after 2929 usecs [ 1.184056] calling cpufreq_gov_performance_init+0x0/0x39 @ 1 [ 1.185035] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs [ 1.186007] calling cpufreq_gov_userspace_init+0x0/0x39 @ 1 [ 1.187058] initcall cpufreq_gov_userspace_init+0x0/0x39 returned 0 after 0 usecs [ 1.188008] calling ssb_modinit+0x0/0x9a @ 1 [ 1.189356] initcall ssb_modinit+0x0/0x9a returned 0 after 0 usecs [ 1.190074] calling pcibios_assign_resources+0x0/0x9a @ 1 [ 1.191240] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 1.192009] pci 0000:00:09.0: IO window: 0xc000-0xcfff [ 1.193012] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff [ 1.194057] pci 0000:00:09.0: PREFETCH window: disabled [ 1.195010] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 1.196006] pci 0000:00:0b.0: IO window: disabled [ 1.197011] pci 0000:00:0b.0: MEM window: disabled [ 1.198060] pci 0000:00:0b.0: PREFETCH window: disabled [ 1.199010] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 1.200006] pci 0000:00:0c.0: IO window: disabled [ 1.201011] pci 0000:00:0c.0: MEM window: disabled [ 1.202057] pci 0000:00:0c.0: PREFETCH window: disabled [ 1.203010] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 1.204006] pci 0000:00:0d.0: IO window: disabled [ 1.205011] pci 0000:00:0d.0: MEM window: disabled [ 1.206057] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.207018] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200 [ 1.208011] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 1.209008] pci 0000:00:0e.0: IO window: 0xb000-0xbfff [ 1.210060] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff [ 1.211011] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.212024] pci 0000:00:09.0: setting latency timer to 64 [ 1.213019] pci 0000:00:0b.0: setting latency timer to 64 [ 1.214067] pci 0000:00:0c.0: setting latency timer to 64 [ 1.215019] pci 0000:00:0d.0: setting latency timer to 64 [ 1.216019] pci 0000:00:0e.0: setting latency timer to 64 [ 1.217010] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.218055] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.219007] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 1.220007] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff] [ 1.221007] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 1.222055] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.223008] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 1.224007] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff] [ 1.225007] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 1.226056] initcall pcibios_assign_resources+0x0/0x9a returned 0 after 34179 usecs [ 1.227008] calling sysctl_core_init+0x0/0x5f @ 1 [ 1.228061] initcall sysctl_core_init+0x0/0x5f returned 0 after 0 usecs [ 1.229008] calling inet_init+0x0/0x1ff @ 1 [ 1.231082] NET: Registered protocol family 2 [ 1.232405] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.236560] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.241858] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) [ 1.252684] TCP: Hash tables configured (established 131072 bind 65536) [ 1.253058] TCP reno registered [ 1.255065] initcall inet_init+0x0/0x1ff returned 0 after 24414 usecs [ 1.256009] calling af_unix_init+0x0/0x7b @ 1 [ 1.258063] NET: Registered protocol family 1 [ 1.259032] initcall af_unix_init+0x0/0x7b returned 0 after 1953 usecs [ 1.260011] calling populate_rootfs+0x0/0x100 @ 1 [ 1.262658] initcall populate_rootfs+0x0/0x100 returned 0 after 976 usecs [ 1.263010] calling calgary_fixup_tce_spaces+0x0/0x121 @ 1 [ 1.264009] initcall calgary_fixup_tce_spaces+0x0/0x121 returned -19 after 0 usecs [ 1.265008] calling vmx_init+0x0/0x233 @ 1 [ 1.267457] kvm: no hardware support [ 1.268022] initcall vmx_init+0x0/0x233 returned -95 after 1953 usecs [ 1.269008] initcall vmx_init+0x0/0x233 returned with error code -95 [ 1.271009] calling svm_init+0x0/0x40 @ 1 [ 1.272527] has_svm: svm not available [ 1.273006] kvm: no hardware support [ 1.275010] initcall svm_init+0x0/0x40 returned -95 after 2929 usecs [ 1.276008] initcall svm_init+0x0/0x40 returned with error code -95 [ 1.277007] calling i8259A_init_sysfs+0x0/0x49 @ 1 [ 1.279215] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 976 usecs [ 1.280069] calling vsyscall_init+0x0/0x60 @ 1 [ 1.281021] initcall vsyscall_init+0x0/0x60 returned 0 after 0 usecs [ 1.282007] calling sbf_init+0x0/0x118 @ 1 [ 1.283008] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs [ 1.284059] calling i8237A_init_sysfs+0x0/0x49 @ 1 [ 1.286111] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 976 usecs [ 1.288125] calling add_rtc_cmos+0x0/0x68 @ 1 [ 1.289166] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.290063] initcall add_rtc_cmos+0x0/0x68 returned 0 after 976 usecs [ 1.291009] calling cache_sysfs_init+0x0/0x85 @ 1 [ 1.295284] initcall cache_sysfs_init+0x0/0x85 returned 0 after 2929 usecs [ 1.296141] calling mce_init_device+0x0/0x124 @ 1 [ 1.299144] initcall mce_init_device+0x0/0x124 returned 0 after 1953 usecs [ 1.300087] calling threshold_init_device+0x0/0xc0 @ 1 [ 1.300011] Clocksource tsc unstable (delta = 1237999586 ns) [ 1.301008] initcall threshold_init_device+0x0/0xc0 returned 0 after 0 usecs [ 1.302009] calling inject_init+0x0/0x4b @ 1 [ 1.303006] Machine check injector initialized [ 1.304055] initcall inject_init+0x0/0x4b returned 0 after 976 usecs [ 1.305007] calling msr_init+0x0/0x15c @ 1 [ 1.307390] initcall msr_init+0x0/0x15c returned 0 after 976 usecs [ 1.308095] calling ioapic_init_sysfs+0x0/0xd0 @ 1 [ 1.309144] initcall ioapic_init_sysfs+0x0/0xd0 returned 0 after 0 usecs [ 1.310070] calling add_pcspkr+0x0/0x4f @ 1 [ 1.312103] initcall add_pcspkr+0x0/0x4f returned 0 after 976 usecs [ 1.313055] calling start_periodic_check_for_corruption+0x0/0x61 @ 1 [ 1.314008] initcall start_periodic_check_for_corruption+0x0/0x61 returned 0 after 0 usecs [ 1.315008] calling audit_classes_init+0x0/0xd6 @ 1 [ 1.316039] initcall audit_classes_init+0x0/0xd6 returned 0 after 0 usecs [ 1.317056] calling pt_dump_init+0x0/0x57 @ 1 [ 1.318030] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs [ 1.319008] calling crypto_fpu_module_init+0x0/0x39 @ 1 [ 1.320129] initcall crypto_fpu_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.321056] calling aes_init+0x0/0x39 @ 1 [ 1.322207] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 1.323012] calling init+0x0/0x39 @ 1 [ 1.325111] initcall init+0x0/0x39 returned 0 after 976 usecs [ 1.326007] calling init+0x0/0x39 @ 1 [ 1.327099] initcall init+0x0/0x39 returned 0 after 0 usecs [ 1.328010] calling aesni_init+0x0/0x188 @ 1 [ 1.329006] Intel AES-NI instructions are not detected. [ 1.330008] initcall aesni_init+0x0/0x188 returned -19 after 976 usecs [ 1.331007] calling crc32c_intel_mod_init+0x0/0x47 @ 1 [ 1.332062] initcall crc32c_intel_mod_init+0x0/0x47 returned -19 after 0 usecs [ 1.334008] calling init_vdso_vars+0x0/0x272 @ 1 [ 1.335027] initcall init_vdso_vars+0x0/0x272 returned 0 after 0 usecs [ 1.336056] calling ia32_binfmt_init+0x0/0x3b @ 1 [ 1.337014] initcall ia32_binfmt_init+0x0/0x3b returned 0 after 0 usecs [ 1.338007] calling sysenter_setup+0x0/0xfb @ 1 [ 1.339015] initcall sysenter_setup+0x0/0xfb returned 0 after 0 usecs [ 1.340056] calling init_aout_binfmt+0x0/0x3b @ 1 [ 1.341009] initcall init_aout_binfmt+0x0/0x3b returned 0 after 0 usecs [ 1.342007] calling init_sched_debug_procfs+0x0/0x53 @ 1 [ 1.343027] initcall init_sched_debug_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.345009] calling proc_schedstat_init+0x0/0x49 @ 1 [ 1.346020] initcall proc_schedstat_init+0x0/0x49 returned 0 after 0 usecs [ 1.347008] calling proc_execdomains_init+0x0/0x49 @ 1 [ 1.348068] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs [ 1.349008] calling ioresources_init+0x0/0x63 @ 1 [ 1.350031] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs [ 1.351008] calling uid_cache_init+0x0/0xb4 @ 1 [ 1.352126] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs [ 1.353008] calling init_posix_timers+0x0/0x10e @ 1 [ 1.354055] initcall init_posix_timers+0x0/0x10e returned 0 after 0 usecs [ 1.355008] calling init_posix_cpu_timers+0x0/0x109 @ 1 [ 1.356057] initcall init_posix_cpu_timers+0x0/0x109 returned 0 after 0 usecs [ 1.357007] calling nsproxy_cache_init+0x0/0x54 @ 1 [ 1.358054] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs [ 1.359010] calling create_proc_profile+0x0/0x85 @ 1 [ 1.360057] initcall create_proc_profile+0x0/0x85 returned 0 after 0 usecs [ 1.361008] calling timekeeping_init_device+0x0/0x49 @ 1 [ 1.363208] initcall timekeeping_init_device+0x0/0x49 returned 0 after 976 usecs [ 1.364008] calling init_clocksource_sysfs+0x0/0x77 @ 1 [ 1.366195] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 976 usecs [ 1.367064] calling init_timer_list_procfs+0x0/0x53 @ 1 [ 1.368021] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.369008] calling init_tstats_procfs+0x0/0x53 @ 1 [ 1.370020] initcall init_tstats_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.371062] calling lockdep_proc_init+0x0/0xa3 @ 1 [ 1.372063] initcall lockdep_proc_init+0x0/0xa3 returned 0 after 0 usecs [ 1.373008] calling futex_init+0x0/0xa9 @ 1 [ 1.374057] initcall futex_init+0x0/0xa9 returned 0 after 0 usecs [ 1.375056] calling proc_dma_init+0x0/0x49 @ 1 [ 1.376020] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs [ 1.377008] calling kallsyms_init+0x0/0x4c @ 1 [ 1.378020] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs [ 1.379056] calling crash_save_vmcoreinfo_init+0x0/0x492 @ 1 [ 1.380036] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 0 usecs [ 1.381008] calling crash_notes_memory_init+0x0/0x5f @ 1 [ 1.382015] initcall crash_notes_memory_init+0x0/0x5f returned 0 after 0 usecs [ 1.383057] calling backtrace_regression_test+0x0/0x11f @ 1 [ 1.384006] ====[ backtrace testing ]=========== [ 1.385006] Testing a backtrace from process context. [ 1.386006] The following trace is a kernel self test and not a bug! [ 1.388010] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip-00896-g6efa9e9-dirty #718 [ 1.389006] Call Trace: [ 1.390011] [<ffffffff810c7731>] ? backtrace_regression_test+0x0/0x11f [ 1.391058] [<ffffffff810c777b>] backtrace_regression_test+0x4a/0x11f [ 1.392009] [<ffffffff810c7731>] ? backtrace_regression_test+0x0/0x11f [ 1.393010] [<ffffffff810b1515>] ? jiffies_read+0xd/0x3c [ 1.394009] [<ffffffff810afcc9>] ? ktime_get+0x77/0xea [ 1.395057] [<ffffffff828a7a49>] ? kallsyms_init+0x0/0x4c [ 1.396009] [<ffffffff810c7731>] ? backtrace_regression_test+0x0/0x11f [ 1.397011] [<ffffffff8100a10b>] do_one_initcall+0x85/0x1a5 [ 1.398011] [<ffffffff810bc0da>] ? __lock_acquire+0x3e6/0x463 [ 1.399058] [<ffffffff8119e679>] ? proc_register+0x114/0x138 [ 1.400010] [<ffffffff810b840f>] ? put_lock_stats+0x3b/0x5a [ 1.401009] [<ffffffff810b84f3>] ? lock_release_holdtime+0xc5/0xe1 [ 1.402009] [<ffffffff8119e679>] ? proc_register+0x114/0x138 [ 1.403057] [<ffffffff810bceaf>] ? __lock_release+0x17f/0x19f [ 1.404011] [<ffffffff8148e1ca>] ? _raw_spin_unlock+0x9e/0xbb [ 1.405009] [<ffffffff810c4297>] ? test_ti_thread_flag+0xd/0x3a [ 1.406011] [<ffffffff81f4e250>] ? _spin_unlock+0x5e/0x82 [ 1.407057] [<ffffffff8119e679>] ? proc_register+0x114/0x138 [ 1.408009] [<ffffffff8119e803>] ? create_proc_entry+0x92/0xbe [ 1.409011] [<ffffffff810d56f5>] ? register_irq_proc+0x12/0xf2 [ 1.410009] [<ffffffff810d2161>] ? irq_to_desc+0xd/0x49 [ 1.411059] [<ffffffff8288f140>] ? early_idt_handler+0x0/0x71 [ 1.412009] [<ffffffff8288f140>] ? early_idt_handler+0x0/0x71 [ 1.413009] [<ffffffff8288f95c>] do_basic_setup+0x59/0x82 [ 1.414009] [<ffffffff8288f140>] ? early_idt_handler+0x0/0x71 [ 1.415057] [<ffffffff8288fa0d>] kernel_init+0x88/0xe2 [ 1.416009] [<ffffffff8288f140>] ? early_idt_handler+0x0/0x71 [ 1.417011] [<ffffffff8103d45a>] child_rip+0xa/0x20 [ 1.418010] [<ffffffff8103cd94>] ? restore_args+0x0/0x30 [ 1.419057] [<ffffffff8288f985>] ? kernel_init+0x0/0xe2 [ 1.420009] [<ffffffff8103d450>] ? child_rip+0x0/0x20 [ 1.421006] Testing a backtrace from irq context. [ 1.422006] The following trace is a kernel self test and not a bug! [ 1.423065] Pid: 4, comm: ksoftirqd/0 Tainted: G W 2.6.31-rc5-tip-00896-g6efa9e9-dirty #718 [ 1.424003] Call Trace: [ 1.425003] <IRQ> [<ffffffff810c770f>] backtrace_test_irq_callback+0x21/0x43 [ 1.427008] [<ffffffff8108f5ee>] tasklet_action+0xd1/0x160 [ 1.428006] [<ffffffff81090501>] __do_softirq+0x14d/0x25b [ 1.429006] [<ffffffff8103d55c>] call_softirq+0x1c/0x30 [ 1.430003] <EOI> [<ffffffff8103f8ca>] do_softirq+0x5e/0xcf [ 1.432006] [<ffffffff8108f21c>] ksoftirqd+0xa8/0x19d [ 1.433006] [<ffffffff810740e5>] ? complete+0x57/0x76 [ 1.434006] [<ffffffff8108f174>] ? ksoftirqd+0x0/0x19d [ 1.435007] [<ffffffff810a4b28>] kthread+0x96/0x9e [ 1.436006] [<ffffffff8103d45a>] child_rip+0xa/0x20 [ 1.437006] [<ffffffff8103cd94>] ? restore_args+0x0/0x30 [ 1.438006] [<ffffffff810a4a92>] ? kthread+0x0/0x9e [ 1.439006] [<ffffffff8103d450>] ? child_rip+0x0/0x20 [ 1.440016] Testing a saved backtrace. [ 1.441006] The following trace is a kernel self test and not a bug! [ 1.442010] [<ffffffff81049fbb>] save_stack_trace+0x3e/0x73 [ 1.444060] [<ffffffff810c7819>] backtrace_regression_test+0xe8/0x11f [ 1.446006] [<ffffffff8100a10b>] do_one_initcall+0x85/0x1a5 [ 1.448054] [<ffffffff8288f95c>] do_basic_setup+0x59/0x82 [ 1.450006] [<ffffffff8288fa0d>] kernel_init+0x88/0xe2 [ 1.452054] [<ffffffff8103d45a>] child_rip+0xa/0x20 [ 1.454006] [<ffffffffffffffff>] 0xffffffffffffffff [ 1.456054] ====[ end of backtrace testing ]==== [ 1.457009] initcall backtrace_regression_test+0x0/0x11f returned 0 after 71289 usecs [ 1.458008] calling pid_namespaces_init+0x0/0x54 @ 1 [ 1.459102] initcall pid_namespaces_init+0x0/0x54 returned 0 after 0 usecs [ 1.460057] calling audit_init+0x0/0x17a @ 1 [ 1.461007] audit: initializing netlink socket (disabled) [ 1.462129] type=2000 audit(1249399790.462:1): initialized [ 1.463021] initcall audit_init+0x0/0x17a returned 0 after 1953 usecs [ 1.464056] calling hung_task_init+0x0/0x79 @ 1 [ 1.465116] initcall hung_task_init+0x0/0x79 returned 0 after 0 usecs [ 1.466010] calling rcuclassic_trace_init+0x0/0x17d @ 1 [ 1.467099] initcall rcuclassic_trace_init+0x0/0x17d returned 0 after 0 usecs [ 1.468008] calling utsname_sysctl_init+0x0/0x3b @ 1 [ 1.469014] initcall utsname_sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 1.470064] calling init_lstats_procfs+0x0/0x4c @ 1 [ 1.471024] initcall init_lstats_procfs+0x0/0x4c returned 0 after 0 usecs [ 1.472008] calling ftrace_nodyn_init+0x0/0x37 @ 1 [ 1.473008] initcall ftrace_nodyn_init+0x0/0x37 returned 0 after 0 usecs [ 1.474056] calling init_events+0x0/0x8c @ 1 [ 1.475029] initcall init_events+0x0/0x8c returned 0 after 0 usecs [ 1.476008] calling init_sched_switch_trace+0x0/0x39 @ 1 [ 1.477016] Testing tracer sched_switch: PASSED [ 1.580957] initcall init_sched_switch_trace+0x0/0x39 returned 0 after 100586 usecs [ 1.581009] calling init_stack_trace+0x0/0x39 @ 1 [ 1.582010] Testing tracer sysprof: .. no entries found ..FAILED! [ 1.686807] initcall init_stack_trace+0x0/0x39 returned -1 after 101562 usecs [ 1.688010] initcall init_stack_trace+0x0/0x39 returned with error code -1 [ 1.690009] calling init_function_trace+0x0/0x39 @ 1 [ 1.691010] Testing tracer function: PASSED [ 1.796011] initcall init_function_trace+0x0/0x39 returned 0 after 102539 usecs [ 1.797008] calling init_irqsoff_tracer+0x0/0x53 @ 1 [ 1.798010] Testing tracer irqsoff: PASSED [ 1.801011] Testing tracer preemptoff: PASSED [ 1.803063] Testing tracer preemptirqsoff: PASSED [ 1.805010] initcall init_irqsoff_tracer+0x0/0x53 returned 0 after 6835 usecs [ 1.806008] calling init_graph_trace+0x0/0x39 @ 1 [ 1.807010] Testing tracer function_graph: PASSED [ 1.911012] initcall init_graph_trace+0x0/0x39 returned 0 after 101562 usecs [ 1.912010] calling init_power_trace+0x0/0x39 @ 1 [ 1.913011] initcall init_power_trace+0x0/0x39 returned 0 after 0 usecs [ 1.914056] calling init_kmem_tracer+0x0/0x7d @ 1 [ 1.915014] Warning: could not register the kmem tracer [ 1.916008] initcall init_kmem_tracer+0x0/0x7d returned 1 after 976 usecs [ 1.917008] initcall init_kmem_tracer+0x0/0x7d returned with error code 1 [ 1.918056] calling init_blk_tracer+0x0/0x7e @ 1 [ 1.919016] initcall init_blk_tracer+0x0/0x7e returned 0 after 0 usecs [ 1.920056] calling register_ftrace_syscalls+0x0/0xc5 @ 1 [ 1.921016] initcall register_ftrace_syscalls+0x0/0xc5 returned 0 after 0 usecs [ 1.922008] calling init_ksym_trace+0x0/0x76 @ 1 [ 1.923031] Testing tracer ksym_tracer: PASSED [ 1.939777] initcall init_ksym_trace+0x0/0x76 returned 0 after 15625 usecs [ 1.940009] calling perf_counter_sysfs_init+0x0/0x40 @ 1 [ 1.941036] initcall perf_counter_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 1.942009] calling init_per_zone_wmark_min+0x0/0x8d @ 1 [ 1.943138] initcall init_per_zone_wmark_min+0x0/0x8d returned 0 after 0 usecs [ 1.944008] calling pdflush_init+0x0/0x43 @ 1 [ 1.945129] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs [ 1.946010] calling kswapd_init+0x0/0x97 @ 1 [ 1.947170] initcall kswapd_init+0x0/0x97 returned 0 after 0 usecs [ 1.948009] calling init_tmpfs+0x0/0x64 @ 1 [ 1.949196] initcall init_tmpfs+0x0/0x64 returned 0 after 0 usecs [ 1.950009] calling setup_vmstat+0x0/0xef @ 1 [ 1.951077] initcall setup_vmstat+0x0/0xef returned 0 after 0 usecs [ 1.952009] calling mm_sysfs_init+0x0/0x50 @ 1 [ 1.953023] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs [ 1.954008] calling proc_vmalloc_init+0x0/0x4c @ 1 [ 1.956023] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs [ 1.957009] calling procswaps_init+0x0/0x49 @ 1 [ 1.958021] initcall procswaps_init+0x0/0x49 returned 0 after 0 usecs [ 1.959009] calling hugetlb_init+0x0/0x230 @ 1 [ 1.960012] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.961051] initcall hugetlb_init+0x0/0x230 returned 0 after 976 usecs [ 1.962008] calling slab_proc_init+0x0/0x4c @ 1 [ 1.963022] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs [ 1.964008] calling slab_sysfs_init+0x0/0x11b @ 1 [ 2.017158] initcall slab_sysfs_init+0x0/0x11b returned 0 after 50781 usecs [ 2.018144] calling fasync_init+0x0/0x51 @ 1 [ 2.020050] initcall fasync_init+0x0/0x51 returned 0 after 976 usecs [ 2.021071] calling proc_filesystems_init+0x0/0x49 @ 1 [ 2.022029] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs [ 2.023008] calling dnotify_init+0x0/0xa7 @ 1 [ 2.025493] initcall dnotify_init+0x0/0xa7 returned 0 after 976 usecs [ 2.026058] calling aio_setup+0x0/0x9c @ 1 [ 2.030168] initcall aio_setup+0x0/0x9c returned 0 after 2929 usecs [ 2.031058] calling proc_locks_init+0x0/0x49 @ 1 [ 2.032027] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs [ 2.033008] calling init_sys32_ioctl+0x0/0xac @ 1 [ 2.034024] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs [ 2.035056] calling init_mbcache+0x0/0x3b @ 1 [ 2.036012] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs [ 2.037008] calling dquot_init+0x0/0x12a @ 1 [ 2.038007] VFS: Disk quotas dquot_6.5.2 [ 2.040068] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.041067] initcall dquot_init+0x0/0x12a returned 0 after 2929 usecs [ 2.042008] calling init_v1_quota_format+0x0/0x39 @ 1 [ 2.043010] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs [ 2.044056] calling init_v2_quota_format+0x0/0x39 @ 1 [ 2.045009] initcall init_v2_quota_format+0x0/0x39 returned 0 after 0 usecs [ 2.046008] calling proc_cmdline_init+0x0/0x49 @ 1 [ 2.047023] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs [ 2.048057] calling proc_cpuinfo_init+0x0/0x49 @ 1 [ 2.049021] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs [ 2.050008] calling proc_devices_init+0x0/0x49 @ 1 [ 2.051021] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs [ 2.052057] calling proc_interrupts_init+0x0/0x49 @ 1 [ 2.053021] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs [ 2.054008] calling proc_loadavg_init+0x0/0x49 @ 1 [ 2.055021] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs [ 2.057009] calling proc_meminfo_init+0x0/0x49 @ 1 [ 2.058021] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs [ 2.059009] calling proc_stat_init+0x0/0x49 @ 1 [ 2.060069] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs [ 2.061008] calling proc_uptime_init+0x0/0x49 @ 1 [ 2.062021] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs [ 2.063009] calling proc_version_init+0x0/0x49 @ 1 [ 2.064069] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs [ 2.065008] calling proc_softirqs_init+0x0/0x49 @ 1 [ 2.066021] initcall proc_softirqs_init+0x0/0x49 returned 0 after 0 usecs [ 2.067009] calling proc_kmsg_init+0x0/0x4c @ 1 [ 2.068081] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs [ 2.069008] calling proc_page_init+0x0/0x69 @ 1 [ 2.070033] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs [ 2.071008] calling configfs_init+0x0/0xfb @ 1 [ 2.073125] initcall configfs_init+0x0/0xfb returned 0 after 976 usecs [ 2.074014] calling init_devpts_fs+0x0/0x72 @ 1 [ 2.075355] initcall init_devpts_fs+0x0/0x72 returned 0 after 0 usecs [ 2.076008] calling init_dlm+0x0/0xbe @ 1 [ 2.079348] DLM (built Aug 4 2009 11:29:49) installed [ 2.080063] initcall init_dlm+0x0/0xbe returned 0 after 2929 usecs [ 2.081009] calling init_ext3_fs+0x0/0x99 @ 1 [ 2.083533] initcall init_ext3_fs+0x0/0x99 returned 0 after 976 usecs [ 2.084093] calling journal_init+0x0/0xf5 @ 1 [ 2.088278] initcall journal_init+0x0/0xf5 returned 0 after 2929 usecs [ 2.089086] calling journal_init+0x0/0xd6 @ 1 [ 2.093170] initcall journal_init+0x0/0xd6 returned 0 after 2929 usecs [ 2.094059] calling init_cramfs_fs+0x0/0x57 @ 1 [ 2.095048] initcall init_cramfs_fs+0x0/0x57 returned 0 after 0 usecs [ 2.096009] calling init_squashfs_fs+0x0/0x93 @ 1 [ 2.098087] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.099058] initcall init_squashfs_fs+0x0/0x93 returned 0 after 1953 usecs [ 2.100008] calling init_ramfs_fs+0x0/0x39 @ 1 [ 2.101010] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs [ 2.102008] calling init_hugetlbfs_fs+0x0/0xbe @ 1 [ 2.104309] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 976 usecs [ 2.105015] calling init_coda+0x0/0x16a @ 1 [ 2.110167] initcall init_coda+0x0/0x16a returned 0 after 3906 usecs [ 2.111009] calling init_fat_fs+0x0/0x75 @ 1 [ 2.114157] initcall init_fat_fs+0x0/0x75 returned 0 after 1953 usecs [ 2.115098] calling init_vfat_fs+0x0/0x39 @ 1 [ 2.116011] initcall init_vfat_fs+0x0/0x39 returned 0 after 0 usecs [ 2.117008] calling init_msdos_fs+0x0/0x39 @ 1 [ 2.118010] initcall init_msdos_fs+0x0/0x39 returned 0 after 0 usecs [ 2.119056] calling init_hfsplus_fs+0x0/0x83 @ 1 [ 2.120417] initcall init_hfsplus_fs+0x0/0x83 returned 0 after 0 usecs [ 2.121060] calling ecryptfs_init+0x0/0x220 @ 1 [ 2.132370] initcall ecryptfs_init+0x0/0x220 returned 0 after 9765 usecs [ 2.133154] calling vxfs_init+0x0/0x7f @ 1 [ 2.135175] initcall vxfs_init+0x0/0x7f returned 0 after 976 usecs [ 2.136061] calling init_nfs_fs+0x0/0x15e @ 1 [ 2.141081] initcall init_nfs_fs+0x0/0x15e returned 0 after 3906 usecs [ 2.142009] calling init_nfsd+0x0/0xe1 @ 1 [ 2.143007] Installing knfsd (copyright (C) 1996 [email protected]). [ 2.145978] initcall init_nfsd+0x0/0xe1 returned 0 after 1953 usecs [ 2.146009] calling init_nlm+0x0/0x49 @ 1 [ 2.147013] initcall init_nlm+0x0/0x49 returned 0 after 0 usecs [ 2.148009] calling init_nls_cp737+0x0/0x39 @ 1 [ 2.149082] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs [ 2.150008] calling init_nls_cp775+0x0/0x39 @ 1 [ 2.151010] initcall init_nls_cp775+0x0/0x39 returned 0 after 0 usecs [ 2.152009] calling init_nls_cp852+0x0/0x39 @ 1 [ 2.153058] initcall init_nls_cp852+0x0/0x39 returned 0 after 0 usecs [ 2.154008] calling init_nls_cp855+0x0/0x39 @ 1 [ 2.155010] initcall init_nls_cp855+0x0/0x39 returned 0 after 0 usecs [ 2.156008] calling init_nls_cp857+0x0/0x39 @ 1 [ 2.157058] initcall init_nls_cp857+0x0/0x39 returned 0 after 0 usecs [ 2.158008] calling init_nls_cp861+0x0/0x39 @ 1 [ 2.159010] initcall init_nls_cp861+0x0/0x39 returned 0 after 0 usecs [ 2.160008] calling init_nls_cp865+0x0/0x39 @ 1 [ 2.161058] initcall init_nls_cp865+0x0/0x39 returned 0 after 0 usecs [ 2.162008] calling init_nls_cp866+0x0/0x39 @ 1 [ 2.163010] initcall init_nls_cp866+0x0/0x39 returned 0 after 0 usecs [ 2.164008] calling init_nls_cp869+0x0/0x39 @ 1 [ 2.165058] initcall init_nls_cp869+0x0/0x39 returned 0 after 0 usecs [ 2.166013] calling init_nls_cp874+0x0/0x39 @ 1 [ 2.167010] initcall init_nls_cp874+0x0/0x39 returned 0 after 0 usecs [ 2.168008] calling init_nls_cp932+0x0/0x39 @ 1 [ 2.170011] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs [ 2.171008] calling init_nls_euc_jp+0x0/0x6f @ 1 [ 2.172011] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs [ 2.173057] calling init_nls_cp936+0x0/0x39 @ 1 [ 2.174010] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs [ 2.175008] calling init_nls_cp950+0x0/0x39 @ 1 [ 2.176010] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs [ 2.177057] calling init_nls_cp1250+0x0/0x39 @ 1 [ 2.178010] initcall init_nls_cp1250+0x0/0x39 returned 0 after 0 usecs [ 2.179009] calling init_nls_cp1251+0x0/0x39 @ 1 [ 2.180010] initcall init_nls_cp1251+0x0/0x39 returned 0 after 0 usecs [ 2.181058] calling init_nls_iso8859_1+0x0/0x39 @ 1 [ 2.182010] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs [ 2.183009] calling init_nls_iso8859_2+0x0/0x39 @ 1 [ 2.184010] initcall init_nls_iso8859_2+0x0/0x39 returned 0 after 0 usecs [ 2.185057] calling init_nls_iso8859_4+0x0/0x39 @ 1 [ 2.186010] initcall init_nls_iso8859_4+0x0/0x39 returned 0 after 0 usecs [ 2.187009] calling init_nls_iso8859_5+0x0/0x39 @ 1 [ 2.188010] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs [ 2.189057] calling init_nls_iso8859_6+0x0/0x39 @ 1 [ 2.190010] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs [ 2.191009] calling init_nls_cp1255+0x0/0x39 @ 1 [ 2.192010] initcall init_nls_cp1255+0x0/0x39 returned 0 after 0 usecs [ 2.193057] calling init_nls_iso8859_9+0x0/0x39 @ 1 [ 2.194010] initcall init_nls_iso8859_9+0x0/0x39 returned 0 after 0 usecs [ 2.195009] calling init_nls_iso8859_13+0x0/0x39 @ 1 [ 2.196010] initcall init_nls_iso8859_13+0x0/0x39 returned 0 after 0 usecs [ 2.197059] calling init_nls_iso8859_14+0x0/0x39 @ 1 [ 2.198010] initcall init_nls_iso8859_14+0x0/0x39 returned 0 after 0 usecs [ 2.199009] calling init_nls_iso8859_15+0x0/0x39 @ 1 [ 2.200010] initcall init_nls_iso8859_15+0x0/0x39 returned 0 after 0 usecs [ 2.201057] calling init_nls_utf8+0x0/0x4a @ 1 [ 2.202010] initcall init_nls_utf8+0x0/0x4a returned 0 after 0 usecs [ 2.203009] calling init_sysv_fs+0x0/0x75 @ 1 [ 2.205513] initcall init_sysv_fs+0x0/0x75 returned 0 after 976 usecs [ 2.206082] calling init_cifs+0x0/0x37a @ 1 [ 2.211310] initcall init_cifs+0x0/0x37a returned 0 after 3906 usecs [ 2.212066] calling init_ufs_fs+0x0/0x89 @ 1 [ 2.214163] initcall init_ufs_fs+0x0/0x89 returned 0 after 976 usecs [ 2.215075] calling init_efs_fs+0x0/0x95 @ 1 [ 2.216007] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 2.218328] initcall init_efs_fs+0x0/0x95 returned 0 after 1953 usecs [ 2.220015] calling init_autofs4_fs+0x0/0x4c @ 1 [ 2.222152] initcall init_autofs4_fs+0x0/0x4c returned 0 after 976 usecs [ 2.223009] calling init_adfs_fs+0x0/0x89 @ 1 [ 2.224365] initcall init_adfs_fs+0x0/0x89 returned 0 after 0 usecs [ 2.225011] calling init_omfs_fs+0x0/0x39 @ 1 [ 2.226010] initcall init_omfs_fs+0x0/0x39 returned 0 after 0 usecs [ 2.227008] calling init_jfs_fs+0x0/0x28a @ 1 [ 2.229381] JFS: nTxBlock = 7060, nTxLock = 56484 [ 2.239148] initcall init_jfs_fs+0x0/0x28a returned 0 after 10742 usecs [ 2.240010] calling init_nilfs_fs+0x0/0xb9 @ 1 [ 2.244156] initcall init_nilfs_fs+0x0/0xb9 returned 0 after 2929 usecs [ 2.245065] calling ocfs2_init+0x0/0x484 @ 1 [ 2.246007] OCFS2 1.5.0 [ 2.252157] initcall ocfs2_init+0x0/0x484 returned 0 after 5859 usecs [ 2.253065] calling ocfs2_stack_glue_init+0x0/0xbb @ 1 [ 2.255053] initcall ocfs2_stack_glue_init+0x0/0xbb returned 0 after 0 usecs [ 2.256009] calling o2cb_stack_init+0x0/0x39 @ 1 [ 2.257056] ocfs2: Registered cluster interface o2cb [ 2.258009] initcall o2cb_stack_init+0x0/0x39 returned 0 after 976 usecs [ 2.259008] calling ocfs2_user_plugin_init+0x0/0x7c @ 1 [ 2.261065] ocfs2: Registered cluster interface user [ 2.262058] initcall ocfs2_user_plugin_init+0x0/0x7c returned 0 after 1953 usecs [ 2.263008] calling init_o2nm+0x0/0xcf @ 1 [ 2.264007] OCFS2 Node Manager 1.5.0 [ 2.268595] initcall init_o2nm+0x0/0xcf returned 0 after 3906 usecs [ 2.269016] calling dlm_init+0x0/0x356 @ 1 [ 2.270007] OCFS2 DLM 1.5.0 [ 2.273449] initcall dlm_init+0x0/0x356 returned 0 after 2929 usecs [ 2.274066] calling init_dlmfs_fs+0x0/0x106 @ 1 [ 2.275007] OCFS2 DLMFS 1.5.0 [ 2.277149] OCFS2 User DLM kernel interface loaded [ 2.278127] initcall init_dlmfs_fs+0x0/0x106 returned 0 after 2929 usecs [ 2.279009] calling init_gfs2_fs+0x0/0x20d @ 1 [ 2.285163] Slow work thread pool: Starting up [ 2.286157] Slow work thread pool: Ready [ 2.288035] GFS2 (built Aug 4 2009 11:30:00) installed [ 2.289014] initcall init_gfs2_fs+0x0/0x20d returned 0 after 8789 usecs [ 2.290009] calling init_exofs+0x0/0x89 @ 1 [ 2.291444] initcall init_exofs+0x0/0x89 returned 0 after 0 usecs [ 2.293017] calling init_mqueue_fs+0x0/0xee @ 1 [ 2.295326] initcall init_mqueue_fs+0x0/0xee returned 0 after 976 usecs [ 2.296116] calling key_proc_init+0x0/0x5a @ 1 [ 2.297033] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs [ 2.298009] calling init_sel_fs+0x0/0x8e @ 1 [ 2.299009] initcall init_sel_fs+0x0/0x8e returned 0 after 0 usecs [ 2.300056] calling selnl_init+0x0/0x74 @ 1 [ 2.301038] initcall selnl_init+0x0/0x74 returned 0 after 0 usecs [ 2.302009] calling sel_netif_init+0x0/0x8d @ 1 [ 2.303009] initcall sel_netif_init+0x0/0x8d returned 0 after 0 usecs [ 2.304057] calling sel_netnode_init+0x0/0x9a @ 1 [ 2.305009] initcall sel_netnode_init+0x0/0x9a returned 0 after 0 usecs [ 2.306009] calling sel_netport_init+0x0/0x9a @ 1 [ 2.307009] initcall sel_netport_init+0x0/0x9a returned 0 after 0 usecs [ 2.308057] calling aurule_init+0x0/0x5e @ 1 [ 2.309011] initcall aurule_init+0x0/0x5e returned 0 after 0 usecs [ 2.310009] calling crypto_wq_init+0x0/0x59 @ 1 [ 2.311165] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs [ 2.312106] calling crypto_algapi_init+0x0/0x34 @ 1 [ 2.313028] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs [ 2.314009] calling chainiv_module_init+0x0/0x39 @ 1 [ 2.315017] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.316058] calling eseqiv_module_init+0x0/0x39 @ 1 [ 2.317014] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.318009] calling seqiv_module_init+0x0/0x39 @ 1 [ 2.319014] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.320059] calling hmac_module_init+0x0/0x39 @ 1 [ 2.321014] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.322009] calling crypto_xcbc_module_init+0x0/0x39 @ 1 [ 2.323014] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.324057] calling crypto_null_mod_init+0x0/0xa5 @ 1 [ 2.325102] alg: No test for cipher_null (cipher_null-generic) [ 2.332072] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 2.333262] alg: No test for digest_null (digest_null-generic) [ 2.339348] alg: No test for compress_null (compress_null-generic) [ 2.340064] initcall crypto_null_mod_init+0x0/0xa5 returned 0 after 14648 usecs [ 2.341064] calling md5_mod_init+0x0/0x39 @ 1 [ 2.342105] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.344011] calling rmd160_mod_init+0x0/0x39 @ 1 [ 2.345096] initcall rmd160_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.346059] calling rmd320_mod_init+0x0/0x39 @ 1 [ 2.347110] initcall rmd320_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.348014] calling sha1_generic_mod_init+0x0/0x39 @ 1 [ 2.349108] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.350011] calling sha256_generic_mod_init+0x0/0x65 @ 1 [ 2.352264] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 976 usecs [ 2.353064] calling sha512_generic_mod_init+0x0/0x65 @ 1 [ 2.354247] initcall sha512_generic_mod_init+0x0/0x65 returned 0 after 0 usecs [ 2.356040] calling crypto_ecb_module_init+0x0/0x39 @ 1 [ 2.357014] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.358009] calling crypto_cbc_module_init+0x0/0x39 @ 1 [ 2.359061] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.360009] calling crypto_pcbc_module_init+0x0/0x39 @ 1 [ 2.361014] initcall crypto_pcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.362009] calling crypto_cts_module_init+0x0/0x39 @ 1 [ 2.364016] initcall crypto_cts_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.365009] calling crypto_module_init+0x0/0x39 @ 1 [ 2.366014] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.368010] calling crypto_module_init+0x0/0x39 @ 1 [ 2.370016] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.371057] calling crypto_ctr_module_init+0x0/0x69 @ 1 [ 2.372019] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs [ 2.373009] calling crypto_ccm_module_init+0x0/0x87 @ 1 [ 2.374024] initcall crypto_ccm_module_init+0x0/0x87 returned 0 after 0 usecs [ 2.375057] calling cryptd_init+0x0/0x109 @ 1 [ 2.376020] initcall cryptd_init+0x0/0x109 returned 0 after 0 usecs [ 2.377009] calling des_generic_mod_init+0x0/0x65 @ 1 [ 2.379246] initcall des_generic_mod_init+0x0/0x65 returned 0 after 976 usecs [ 2.380059] calling fcrypt_mod_init+0x0/0x39 @ 1 [ 2.381111] alg: No test for fcrypt (fcrypt-generic) [ 2.386510] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 4882 usecs [ 2.387009] calling blowfish_mod_init+0x0/0x39 @ 1 [ 2.389276] initcall blowfish_mod_init+0x0/0x39 returned 0 after 976 usecs [ 2.390009] calling aes_init+0x0/0x39 @ 1 [ 2.391143] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 2.392011] calling camellia_init+0x0/0x39 @ 1 [ 2.393147] initcall camellia_init+0x0/0x39 returned 0 after 0 usecs [ 2.394011] calling cast5_mod_init+0x0/0x39 @ 1 [ 2.395111] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.396011] calling arc4_init+0x0/0x39 @ 1 [ 2.397132] initcall arc4_init+0x0/0x39 returned 0 after 0 usecs [ 2.398011] calling tea_mod_init+0x0/0x8a @ 1 [ 2.400387] initcall tea_mod_init+0x0/0x8a returned 0 after 976 usecs [ 2.401064] calling khazad_mod_init+0x0/0x39 @ 1 [ 2.402157] initcall khazad_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.403084] calling deflate_mod_init+0x0/0x39 @ 1 [ 2.405812] initcall deflate_mod_init+0x0/0x39 returned 0 after 976 usecs [ 2.406014] calling michael_mic_init+0x0/0x39 @ 1 [ 2.407135] initcall michael_mic_init+0x0/0x39 returned 0 after 0 usecs [ 2.408011] calling crc32c_mod_init+0x0/0x39 @ 1 [ 2.409163] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.410011] calling crypto_authenc_module_init+0x0/0x39 @ 1 [ 2.411015] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.412009] calling krng_mod_init+0x0/0x39 @ 1 [ 2.413109] alg: No test for stdrng (krng) [ 2.417929] initcall krng_mod_init+0x0/0x39 returned 0 after 3906 usecs [ 2.418009] calling prng_mod_init+0x0/0x4e @ 1 [ 2.419109] alg: No test for stdrng (ansi_cprng) [ 2.423925] initcall prng_mod_init+0x0/0x4e returned 0 after 3906 usecs [ 2.424009] calling proc_genhd_init+0x0/0x63 @ 1 [ 2.425037] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs [ 2.426009] calling bsg_init+0x0/0x155 @ 1 [ 2.428112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.429128] initcall bsg_init+0x0/0x155 returned 0 after 1953 usecs [ 2.430009] calling noop_init+0x0/0x3b @ 1 [ 2.431056] io scheduler noop registered [ 2.432009] initcall noop_init+0x0/0x3b returned 0 after 976 usecs [ 2.433056] calling as_init+0x0/0x3b @ 1 [ 2.434008] io scheduler anticipatory registered (default) [ 2.435009] initcall as_init+0x0/0x3b returned 0 after 976 usecs [ 2.436009] calling deadline_init+0x0/0x3b @ 1 [ 2.437057] io scheduler deadline registered [ 2.438009] initcall deadline_init+0x0/0x3b returned 0 after 976 usecs [ 2.439009] calling cfq_init+0x0/0xbb @ 1 [ 2.441523] io scheduler cfq registered [ 2.442105] initcall cfq_init+0x0/0xbb returned 0 after 1953 usecs [ 2.443009] calling debug_objects_init_debugfs+0x0/0x8a @ 1 [ 2.444073] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs [ 2.445008] calling libcrc32c_mod_init+0x0/0x53 @ 1 [ 2.446066] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs [ 2.447008] calling percpu_counter_startup+0x0/0x54 @ 1 [ 2.448008] initcall percpu_counter_startup+0x0/0x54 returned 0 after 0 usecs [ 2.449009] calling pci_init+0x0/0x60 @ 1 [ 2.450072] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.451050] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.452011] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.453009] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xe3 [ 2.454068] pci 0000:00:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.455012] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.456009] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.457009] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xe3 [ 2.458068] pci 0000:00:01.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.459017] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.460009] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.461009] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xe3 [ 2.462068] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.463017] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.464009] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.476052] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe3 [ 2.477020] pci 0000:00:02.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.478022] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.479009] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.480037] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xe3 [ 2.481019] pci 0000:00:04.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.482017] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.483009] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.484009] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xe3 [ 2.485019] pci 0000:00:06.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.486017] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.487009] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.488008] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xe3 [ 2.489019] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.490011] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.491009] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.492008] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xe3 [ 2.493019] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.494017] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.495009] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.496009] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xe3 [ 2.497019] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.499151] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.500009] pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.501025] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 2.502023] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.503009] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.504010] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.505009] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.506008] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xe3 [ 2.507019] pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.508167] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.509009] pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.510025] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 2.511024] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.512009] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.513010] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.514009] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.515008] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xe3 [ 2.516019] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.517187] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.518009] pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.519025] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 2.520024] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.521009] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.522010] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.523009] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.524008] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xe3 [ 2.525019] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.526208] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.527009] pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.528025] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 2.529024] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.530009] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.531010] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.532009] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.533008] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xe3 [ 2.534019] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x76 [ 2.535014] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.536009] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.537008] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xe3 [ 2.538018] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x76 [ 2.539014] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.540009] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.541008] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xe3 [ 2.542019] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x76 [ 2.543014] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x4e [ 2.544009] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.545008] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xe3 [ 2.546018] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x76 [ 2.547014] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x4e [ 2.548009] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.549008] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xe3 [ 2.550019] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.551009] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.552008] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xe3 [ 2.553019] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.554009] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.555008] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xe3 [ 2.556011] pci 0000:01:00.0: Boot video device [ 2.557019] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.558009] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.559008] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xe3 [ 2.560018] initcall pci_init+0x0/0x60 returned 0 after 107421 usecs [ 2.561008] calling pci_proc_init+0x0/0x90 @ 1 [ 2.562507] initcall pci_proc_init+0x0/0x90 returned 0 after 0 usecs [ 2.563009] calling pcie_portdrv_init+0x0/0x72 @ 1 [ 2.564236] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 2.565021] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 2.566299] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 2.567075] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 2.569094] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 2.570019] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 2.572233] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X [ 2.573096] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 2.575235] initcall pcie_portdrv_init+0x0/0x72 returned 0 after 10742 usecs [ 2.576066] calling aer_service_init+0x0/0x47 @ 1 [ 2.577150] initcall aer_service_init+0x0/0x47 returned 0 after 0 usecs [ 2.578084] calling aer_inject_init+0x0/0x39 @ 1 [ 2.579119] initcall aer_inject_init+0x0/0x39 returned 0 after 0 usecs [ 2.581012] calling pci_hotplug_init+0x0/0x74 @ 1 [ 2.582007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.583008] initcall pci_hotplug_init+0x0/0x74 returned 0 after 976 usecs [ 2.584056] calling pcied_init+0x0/0x9a @ 1 [ 2.585097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.586059] initcall pcied_init+0x0/0x9a returned 0 after 976 usecs [ 2.587009] calling zt5550_init+0x0/0xa3 @ 1 [ 2.588007] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 2.590149] initcall zt5550_init+0x0/0xa3 returned 0 after 1953 usecs [ 2.591014] calling cpcihp_generic_init+0x0/0x254 @ 1 [ 2.592007] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 2.593007] cpcihp_generic: not configured, disabling. [ 2.594009] initcall cpcihp_generic_init+0x0/0x254 returned -22 after 1953 usecs [ 2.595063] initcall cpcihp_generic_init+0x0/0x254 returned with error code -22 [ 2.596008] calling init_legacy+0x0/0x69 @ 1 [ 2.597491] initcall init_legacy+0x0/0x69 returned 0 after 0 usecs [ 2.598009] calling platform_lcd_init+0x0/0x39 @ 1 [ 2.600037] initcall platform_lcd_init+0x0/0x39 returned 0 after 976 usecs [ 2.601009] calling tdo24m_init+0x0/0x39 @ 1 [ 2.602095] initcall tdo24m_init+0x0/0x39 returned 0 after 0 usecs [ 2.603011] calling progearbl_init+0x0/0x7b @ 1 [ 2.605216] ALI M7101 PMU not found. [ 2.606178] initcall progearbl_init+0x0/0x7b returned 0 after 1953 usecs [ 2.607009] calling cr_backlight_init+0x0/0x8b @ 1 [ 2.609196] INTEL CARILLO RANCH LPC not found. [ 2.610124] Carillo Ranch Backlight Driver Initialized. [ 2.611010] initcall cr_backlight_init+0x0/0x8b returned 0 after 2929 usecs [ 2.612008] calling kb3886_init+0x0/0x63 @ 1 [ 2.613010] initcall kb3886_init+0x0/0x63 returned -19 after 0 usecs [ 2.614056] calling arcfb_init+0x0/0x9a @ 1 [ 2.615009] initcall arcfb_init+0x0/0x9a returned -6 after 0 usecs [ 2.616009] initcall arcfb_init+0x0/0x9a returned with error code -6 [ 2.617008] calling cyber2000fb_init+0x0/0xf6 @ 1 [ 2.619096] initcall cyber2000fb_init+0x0/0xf6 returned 0 after 976 usecs [ 2.620060] calling pm3fb_init+0x0/0x107 @ 1 [ 2.621123] initcall pm3fb_init+0x0/0x107 returned 0 after 0 usecs [ 2.622015] calling matroxfb_init+0x0/0x8d @ 1 [ 2.623134] initcall matroxfb_init+0x0/0x8d returned 0 after 0 usecs [ 2.624066] calling matroxfb_crtc2_init+0x0/0x59 @ 1 [ 2.625010] initcall matroxfb_crtc2_init+0x0/0x59 returned 0 after 0 usecs [ 2.626008] calling atyfb_init+0x0/0x94 @ 1 [ 2.627157] initcall atyfb_init+0x0/0x94 returned 0 after 0 usecs [ 2.628121] calling aty128fb_init+0x0/0x75 @ 1 [ 2.629282] initcall aty128fb_init+0x0/0x75 returned 0 after 0 usecs [ 2.630104] calling sisfb_init+0x0/0x70 @ 1 [ 2.631126] initcall sisfb_init+0x0/0x70 returned 0 after 0 usecs [ 2.632091] calling viafb_init+0x0/0x78 @ 1 [ 2.633008] VIA Graphics Intergration Chipset framebuffer 2.4 initializing [ 2.634254] i2c-adapter i2c-0: adapter [via_i2c] registered [ 2.635315] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 [ 2.636009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 [ 2.659009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.702009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.745008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.788008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.789009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? [ 2.790008] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 [ 2.812053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 [ 2.813008] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 [ 2.835008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.878009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.921008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.964008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.965009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? [ 2.966008] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 [ 2.988063] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 [ 2.989008] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 [ 3.011008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.054009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.097008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.140008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.141009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? [ 3.142008] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 [ 3.164052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.165009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.187009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.230009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.273008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.316009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.317009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.318008] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.340052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.341009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.363008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.406008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.449009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.492008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.493009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.494009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.516052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.517009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.539009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.582008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.625009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.668008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.669009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.670009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.692056] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.693009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.715009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.758009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.801009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.844009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.845009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.846009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.868052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.869009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.891009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.934009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.977010] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.020009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.021009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 4.022009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 4.044053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 4.045009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 4.067009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.110009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.153009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.196009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.197010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 4.198009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 4.220054] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.221010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.243009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.286010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.329010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.372010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.373010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.374009] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.396053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.397010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.419010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.462009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.505009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.548010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.549010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.550009] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.572054] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.573010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.595009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.638009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.681010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.724011] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.725010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.726010] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.748053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.749010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.771010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.814009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.857010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.900010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.901010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.902010] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.924054] i2c-adapter i2c-0: master_xfer[0] W, addr=0x38, len=1 [ 4.925010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x38, len=1 [ 4.947010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 4.990010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 5.033010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 5.076010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 5.077010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x38: failed, timeout? [ 5.078010] i2c-adapter i2c-0: NAK from device addr 0x38 msg #0 [ 5.100057] ioremap failed [ 5.101012] initcall viafb_init+0x0/0x78 returned -1 after 2410158 usecs [ 5.102011] initcall viafb_init+0x0/0x78 returned with error code -1 [ 5.103010] calling kyrofb_init+0x0/0xf0 @ 1 [ 5.104138] initcall kyrofb_init+0x0/0xf0 returned 0 after 0 usecs [ 5.105011] calling savagefb_init+0x0/0x9a @ 1 [ 5.106256] initcall savagefb_init+0x0/0x9a returned 0 after 0 usecs [ 5.107013] calling gx1fb_init+0x0/0x70 @ 1 [ 5.108243] initcall gx1fb_init+0x0/0x70 returned 0 after 0 usecs [ 5.109013] calling gxfb_init+0x0/0xa7 @ 1 [ 5.110137] initcall gxfb_init+0x0/0xa7 returned 0 after 0 usecs [ 5.111013] calling neofb_init+0x0/0x70 @ 1 [ 5.113164] initcall neofb_init+0x0/0x70 returned 0 after 976 usecs [ 5.114011] calling tdfxfb_init+0x0/0x129 @ 1 [ 5.116038] initcall tdfxfb_init+0x0/0x129 returned 0 after 976 usecs [ 5.117067] calling vt8623fb_init+0x0/0x7c @ 1 [ 5.118124] initcall vt8623fb_init+0x0/0x7c returned 0 after 0 usecs [ 5.119013] calling tridentfb_init+0x0/0x70 @ 1 [ 5.120126] initcall tridentfb_init+0x0/0x70 returned 0 after 0 usecs [ 5.121013] calling vmlfb_init+0x0/0xbb @ 1 [ 5.122009] vmlfb: initializing [ 5.124237] initcall vmlfb_init+0x0/0xbb returned 0 after 1953 usecs [ 5.125061] calling cr_pll_init+0x0/0x10a @ 1 [ 5.126033] Could not find Carillo Ranch MCH device. [ 5.127011] initcall cr_pll_init+0x0/0x10a returned -19 after 976 usecs [ 5.128010] calling s3fb_init+0x0/0xdf @ 1 [ 5.130123] initcall s3fb_init+0x0/0xdf returned 0 after 976 usecs [ 5.131076] calling metronomefb_init+0x0/0x39 @ 1 [ 5.132147] initcall metronomefb_init+0x0/0x39 returned 0 after 0 usecs [ 5.133091] calling broadsheetfb_init+0x0/0x39 @ 1 [ 5.134115] initcall broadsheetfb_init+0x0/0x39 returned 0 after 0 usecs [ 5.135059] calling s1d13xxxfb_init+0x0/0x54 @ 1 [ 5.136099] initcall s1d13xxxfb_init+0x0/0x54 returned 0 after 0 usecs [ 5.137060] calling xenfb_init+0x0/0x6b @ 1 [ 5.138011] initcall xenfb_init+0x0/0x6b returned -19 after 0 usecs [ 5.139012] calling uvesafb_init+0x0/0x116 @ 1 [ 5.141327] uvesafb: failed to execute /sbin/v86d [ 5.142108] uvesafb: make sure that the v86d helper is installed and executable [ 5.143018] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 5.144016] uvesafb: vbe_init() failed with -22 [ 5.145050] uvesafb: probe of uvesafb.0 failed with error -22 [ 5.146074] initcall uvesafb_init+0x0/0x116 returned 0 after 5859 usecs [ 5.147011] calling evtchn_init+0x0/0x94 @ 1 [ 5.148011] initcall evtchn_init+0x0/0x94 returned -19 after 0 usecs [ 5.149010] calling xenfs_init+0x0/0x54 @ 1 [ 5.150058] XENFS: not registering filesystem on non-xen platform [ 5.151011] initcall xenfs_init+0x0/0x54 returned 0 after 976 usecs [ 5.152012] calling rand_initialize+0x0/0x58 @ 1 [ 5.153053] initcall rand_initialize+0x0/0x58 returned 0 after 0 usecs [ 5.154059] calling tty_init+0x0/0x11c @ 1 [ 5.182346] initcall tty_init+0x0/0x11c returned 0 after 26367 usecs [ 5.183113] calling pty_init+0x0/0x39 @ 1 [ 5.405330] initcall pty_init+0x0/0x39 returned 0 after 215820 usecs [ 5.406190] calling sysrq_init+0x0/0x4c @ 1 [ 5.407038] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs [ 5.408011] calling rp_init+0x0/0x34f @ 1 [ 5.409010] RocketPort device driver module, version 2.09, 12-June-2003 [ 5.410137] No rocketport ports found; unloading driver [ 5.411093] initcall rp_init+0x0/0x34f returned -6 after 1953 usecs [ 5.412011] initcall rp_init+0x0/0x34f returned with error code -6 [ 5.413010] calling cy_init+0x0/0x148 @ 1 [ 5.414061] Cyclades driver 2.5 (built Aug 4 2009 11:29:45) [ 5.415345] initcall cy_init+0x0/0x148 returned 0 after 976 usecs [ 5.416096] calling stallion_module_init+0x0/0x33d @ 1 [ 5.417010] Stallion Multiport Serial Driver: version 5.6.0 [ 5.421216] initcall stallion_module_init+0x0/0x33d returned 0 after 3906 usecs [ 5.422160] calling nozomi_init+0x0/0x153 @ 1 [ 5.423010] Initializing Nozomi driver 2.1d (build date: Aug 4 2009 11:29:47) [ 5.425098] initcall nozomi_init+0x0/0x153 returned 0 after 1953 usecs [ 5.426011] calling specialix_init_module+0x0/0xc4 @ 1 [ 5.427010] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998. [ 5.428009] sx: derived from work (c) D.Gorodchanin 1994-1996. [ 5.429057] sx: DTR/RTS pin is always RTS. [ 5.461314] sx0: specialix IO8+ Board at 0x100 not found. [ 5.462088] sx1: specialix IO8+ Board at 0x180 not found. [ 5.463021] sx2: specialix IO8+ Board at 0x250 not found. [ 5.464021] sx3: specialix IO8+ Board at 0x260 not found. [ 5.530119] sx: No specialix IO8+ boards detected. [ 5.531016] initcall specialix_init_module+0x0/0xc4 returned -5 after 101562 usecs [ 5.532011] initcall specialix_init_module+0x0/0xc4 returned with error code -5 [ 5.533011] calling moxa_init+0x0/0x14c @ 1 [ 5.534058] MOXA Intellio family driver version 6.0k [ 5.601360] initcall moxa_init+0x0/0x14c returned 0 after 65429 usecs [ 5.602018] calling mxser_module_init+0x0/0x230 @ 1 [ 5.603013] MOXA Smartio/Industio family driver version 2.0.4 [ 5.604143] initcall mxser_module_init+0x0/0x230 returned 0 after 976 usecs [ 5.605014] calling ip2_loadmain+0x0/0xa04 @ 1 [ 5.607012] Computone IntelliPort Plus multiport driver version 1.2.14 [ 5.608158] initcall ip2_loadmain+0x0/0xa04 returned 0 after 976 usecs [ 5.609070] calling riscom8_init_module+0x0/0xb0 @ 1 [ 5.610009] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. [ 5.628222] rc0: RISCom/8 Board at 0x220 not found. [ 5.629231] rc1: RISCom/8 Board at 0x240 not found. [ 5.630075] rc2: RISCom/8 Board at 0x250 not found. [ 5.631075] rc3: RISCom/8 Board at 0x260 not found. [ 5.666224] rc: No RISCom/8 boards detected. [ 5.667079] initcall riscom8_init_module+0x0/0xb0 returned -5 after 55664 usecs [ 5.668011] initcall riscom8_init_module+0x0/0xb0 returned with error code -5 [ 5.669012] calling synclinkmp_init+0x0/0x1b7 @ 1 [ 5.670010] SyncLink MultiPort driver $Revision: 4.38 $ [ 5.742188] SyncLink MultiPort driver $Revision: 4.38 $, tty major#250 [ 5.744035] initcall synclinkmp_init+0x0/0x1b7 returned 0 after 72265 usecs [ 5.745012] calling slgt_init+0x0/0x1e6 @ 1 [ 5.746010] SyncLink GT [ 5.747088] SyncLink GT, tty major#249 [ 5.748175] SyncLink GT no devices found [ 5.750035] initcall slgt_init+0x0/0x1e6 returned 0 after 3906 usecs [ 5.751011] calling sx_init+0x0/0x10e @ 1 [ 5.753216] initcall sx_init+0x0/0x10e returned 0 after 976 usecs [ 5.754068] calling xen_init+0x0/0xbb @ 1 [ 5.755011] initcall xen_init+0x0/0xbb returned -19 after 0 usecs [ 5.756011] calling r3964_init+0x0/0x68 @ 1 [ 5.757010] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 5.758062] initcall r3964_init+0x0/0x68 returned 0 after 976 usecs [ 5.759012] calling nvram_init+0x0/0xaa @ 1 [ 5.760173] Non-volatile memory driver v1.3 [ 5.761067] initcall nvram_init+0x0/0xaa returned 0 after 976 usecs [ 5.762011] calling i8k_init+0x0/0x78 @ 1 [ 5.763015] initcall i8k_init+0x0/0x78 returned -19 after 0 usecs [ 5.764011] calling mod_init+0x0/0x231 @ 1 [ 5.766208] initcall mod_init+0x0/0x231 returned -19 after 976 usecs [ 5.767011] calling mod_init+0x0/0x73 @ 1 [ 5.768011] initcall mod_init+0x0/0x73 returned -19 after 0 usecs [ 5.769060] calling mwave_init+0x0/0x2ca @ 1 [ 5.770019] smapi::smapi_init, ERROR invalid usSmapiID [ 5.771010] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 5.772010] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 5.773058] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 5.774012] initcall mwave_init+0x0/0x2ca returned -5 after 3906 usecs [ 5.775012] initcall mwave_init+0x0/0x2ca returned with error code -5 [ 5.776012] calling agp_init+0x0/0x4b @ 1 [ 5.777058] Linux agpgart interface v0.103 [ 5.778012] initcall agp_init+0x0/0x4b returned 0 after 976 usecs [ 5.779011] calling agp_amd64_init+0x0/0xe8 @ 1 [ 5.780401] initcall agp_amd64_init+0x0/0xe8 returned -19 after 0 usecs [ 5.781110] calling agp_intel_init+0x0/0x50 @ 1 [ 5.782144] initcall agp_intel_init+0x0/0x50 returned 0 after 0 usecs [ 5.783018] calling agp_sis_init+0x0/0x50 @ 1 [ 5.784127] initcall agp_sis_init+0x0/0x50 returned 0 after 0 usecs [ 5.785014] calling ipmi_init_msghandler_mod+0x0/0x34 @ 1 [ 5.787120] ipmi message handler version 39.2 [ 5.788036] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 1953 usecs [ 5.789013] calling init_ipmi_si+0x0/0x286 @ 1 [ 5.790113] IPMI System Interface driver. [ 5.796337] ipmi_si: Unable to find any System Interface(s) [ 5.797064] initcall init_ipmi_si+0x0/0x286 returned -19 after 6835 usecs [ 5.798012] calling ipmi_wdog_init+0x0/0x153 @ 1 [ 5.800012] IPMI Watchdog: driver initialized [ 5.801059] initcall ipmi_wdog_init+0x0/0x153 returned 0 after 1953 usecs [ 5.802012] calling ipmi_poweroff_init+0x0/0xb7 @ 1 [ 5.803010] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 5.804024] initcall ipmi_poweroff_init+0x0/0xb7 returned 0 after 976 usecs [ 5.805060] calling init_atmel+0x0/0x1af @ 1 [ 5.806010] Platform driver 'tpm_atmel' needs updating - please use dev_pm_ops [ 5.808210] initcall init_atmel+0x0/0x1af returned -19 after 1953 usecs [ 5.809092] calling drm_core_init+0x0/0x145 @ 1 [ 5.810302] [drm] Initialized drm 1.1.0 20060810 [ 5.811077] initcall drm_core_init+0x0/0x145 returned 0 after 976 usecs [ 5.812011] calling tdfx_init+0x0/0x39 @ 1 [ 5.813142] initcall tdfx_init+0x0/0x39 returned 0 after 0 usecs [ 5.814011] calling radeon_init+0x0/0x50 @ 1 [ 5.818478] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 5.819068] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5 [ 5.820016] pci 0000:01:00.0: setting latency timer to 64 [ 5.822404] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 [ 5.828678] initcall radeon_init+0x0/0x50 returned 0 after 12695 usecs [ 5.829012] calling mga_init+0x0/0x45 @ 1 [ 5.830099] initcall mga_init+0x0/0x45 returned 0 after 0 usecs [ 5.831060] calling i810_init+0x0/0x45 @ 1 [ 5.832098] initcall i810_init+0x0/0x45 returned 0 after 0 usecs [ 5.833012] calling savage_init+0x0/0x45 @ 1 [ 5.834504] initcall savage_init+0x0/0x45 returned 0 after 0 usecs [ 5.835060] calling via_init+0x0/0x4a @ 1 [ 5.837093] initcall via_init+0x0/0x4a returned 0 after 976 usecs [ 5.838012] calling cn_proc_init+0x0/0x63 @ 1 [ 5.839068] initcall cn_proc_init+0x0/0x63 returned 0 after 0 usecs [ 5.840012] calling intelfb_init+0x0/0x9f @ 1 [ 5.841010] intelfb: intelfb_init [ 5.842010] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 5.843058] intelfb: Version 0.9.6 [ 5.844010] intelfb: intelfb_setup [ 5.845009] intelfb: no options [ 5.846173] initcall intelfb_init+0x0/0x9f returned 0 after 4882 usecs [ 5.847111] calling serial8250_init+0x0/0x16f @ 1 [ 5.848011] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.850196] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.854100] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 5.855230] initcall serial8250_init+0x0/0x16f returned 0 after 6835 usecs [ 5.856206] calling serial8250_pci_init+0x0/0x42 @ 1 [ 5.858094] initcall serial8250_pci_init+0x0/0x42 returned 0 after 976 usecs [ 5.859068] calling max3100_init+0x0/0x39 @ 1 [ 5.861211] initcall max3100_init+0x0/0x39 returned 0 after 976 usecs [ 5.862060] calling init_kgdboc+0x0/0x3b @ 1 [ 5.863012] initcall init_kgdboc+0x0/0x3b returned 0 after 0 usecs [ 5.864012] calling parport_default_proc_register+0x0/0x42 @ 1 [ 5.865021] initcall parport_default_proc_register+0x0/0x42 returned 0 after 0 usecs [ 5.867013] calling parport_pc_init+0x0/0xd2 @ 1 [ 5.870368] parport0: PC-style at 0x378 (0x778)async_waiting @ 1 [ 5.873028] async_continuing @ 1 after 0 usec [ 6.012150] [PCSPP(,...)] [ 6.014823] parport0: irq 7 detected [ 6.016380] initcall parport_pc_init+0x0/0xd2 returned 0 after 144531 usecs [ 6.018014] calling parport_serial_init+0x0/0x42 @ 1 [ 6.019159] initcall parport_serial_init+0x0/0x42 returned 0 after 0 usecs [ 6.020137] calling parport_ax88796_init+0x0/0x39 @ 1 [ 6.021109] initcall parport_ax88796_init+0x0/0x39 returned 0 after 0 usecs [ 6.022088] calling topology_sysfs_init+0x0/0x82 @ 1 [ 6.023095] initcall topology_sysfs_init+0x0/0x82 returned 0 after 0 usecs [ 6.024012] calling floppy_init+0x0/0x5bf @ 1 [ 6.025162] Platform driver 'floppy' needs updating - please use dev_pm_ops [ 6.027316] Floppy drive(s): fd0 is 1.44M [ 6.043015] FDC 0 is a post-1991 82077 [ 6.047235] initcall floppy_init+0x0/0x5bf returned 0 after 21484 usecs [ 6.049014] calling brd_init+0x0/0x193 @ 1 [ 6.067335] brd: module loaded [ 6.068135] initcall brd_init+0x0/0x193 returned 0 after 17578 usecs [ 6.069012] calling loop_init+0x0/0x1bc @ 1 [ 6.079203] loop: module loaded [ 6.080169] initcall loop_init+0x0/0x1bc returned 0 after 9765 usecs [ 6.081012] calling cpqarray_init+0x0/0x92 @ 1 [ 6.082010] Compaq SMART2 Driver (v 2.6.0) [ 6.084205] initcall cpqarray_init+0x0/0x92 returned -19 after 1953 usecs [ 6.085110] calling DAC960_init_module+0x0/0x78 @ 1 [ 6.087163] initcall DAC960_init_module+0x0/0x78 returned 0 after 976 usecs [ 6.088075] calling init_cryptoloop+0x0/0x55 @ 1 [ 6.089013] initcall init_cryptoloop+0x0/0x55 returned 0 after 0 usecs [ 6.090012] calling carm_init+0x0/0x42 @ 1 [ 6.091131] initcall carm_init+0x0/0x42 returned 0 after 0 usecs [ 6.092065] calling ibmasm_init+0x0/0x8a @ 1 [ 6.093230] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 6.094015] initcall ibmasm_init+0x0/0x8a returned 0 after 976 usecs [ 6.095012] calling ics932s401_init+0x0/0x3b @ 1 [ 6.096275] i2c-core: driver [ics932s401] registered [ 6.097054] initcall ics932s401_init+0x0/0x3b returned 0 after 976 usecs [ 6.098012] calling tifm_7xx1_init+0x0/0x42 @ 1 [ 6.099129] initcall tifm_7xx1_init+0x0/0x42 returned 0 after 0 usecs [ 6.100015] calling phantom_init+0x0/0x12f @ 1 [ 6.102236] Phantom Linux Driver, version n0.9.8, init OK [ 6.103064] initcall phantom_init+0x0/0x12f returned 0 after 1953 usecs [ 6.104013] calling ioc4_init+0x0/0x47 @ 1 [ 6.105309] initcall ioc4_init+0x0/0x47 returned 0 after 0 usecs [ 6.106074] calling ilo_init+0x0/0xb8 @ 1 [ 6.107161] initcall ilo_init+0x0/0xb8 returned 0 after 0 usecs [ 6.108099] calling isl29003_init+0x0/0x3b @ 1 [ 6.109134] i2c-core: driver [isl29003] registered [ 6.110083] initcall isl29003_init+0x0/0x3b returned 0 after 976 usecs [ 6.111012] calling c2port_init+0x0/0x77 @ 1 [ 6.112010] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 6.113087] initcall c2port_init+0x0/0x77 returned 0 after 976 usecs [ 6.114142] calling duramar2150_c2port_init+0x0/0x97 @ 1 [ 6.116174] c2port c2port0: C2 port uc added [ 6.117065] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 6.118013] initcall duramar2150_c2port_init+0x0/0x97 returned 0 after 2929 usecs [ 6.119012] calling at24_init+0x0/0x5d @ 1 [ 6.120126] i2c-core: driver [at24] registered [ 6.121116] initcall at24_init+0x0/0x5d returned 0 after 976 usecs [ 6.122012] calling at25_init+0x0/0x39 @ 1 [ 6.123140] initcall at25_init+0x0/0x39 returned 0 after 0 usecs [ 6.124018] calling eeprom_init+0x0/0x3b @ 1 [ 6.125095] i2c-core: driver [eeprom] registered [ 6.126025] initcall eeprom_init+0x0/0x3b returned 0 after 976 usecs [ 6.127012] calling max6875_init+0x0/0x3b @ 1 [ 6.129198] i2c-core: driver [max6875] registered [ 6.130021] initcall max6875_init+0x0/0x3b returned 0 after 1953 usecs [ 6.131012] calling cb710_init_module+0x0/0x42 @ 1 [ 6.132151] initcall cb710_init_module+0x0/0x42 returned 0 after 0 usecs [ 6.133069] calling pasic3_base_init+0x0/0x40 @ 1 [ 6.134256] initcall pasic3_base_init+0x0/0x40 returned -19 after 0 usecs [ 6.135015] calling ezx_pcap_init+0x0/0x39 @ 1 [ 6.136096] initcall ezx_pcap_init+0x0/0x39 returned 0 after 0 usecs [ 6.137015] calling pcf50633_adc_init+0x0/0x39 @ 1 [ 6.139031] initcall pcf50633_adc_init+0x0/0x39 returned 0 after 976 usecs [ 6.140014] calling mac_hid_init+0x0/0xfd @ 1 [ 6.142074] input: Macintosh mouse button emulation as /class/input/input0 [ 6.143032] initcall mac_hid_init+0x0/0xfd returned 0 after 1953 usecs [ 6.144011] calling scsi_tgt_init+0x0/0xb1 @ 1 [ 6.146464] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 976 usecs [ 6.147071] calling spi_transport_init+0x0/0x9f @ 1 [ 6.149169] initcall spi_transport_init+0x0/0x9f returned 0 after 976 usecs [ 6.150143] calling fc_transport_init+0x0/0x73 @ 1 [ 6.152183] initcall fc_transport_init+0x0/0x73 returned 0 after 976 usecs [ 6.153104] calling iscsi_transport_init+0x0/0x173 @ 1 [ 6.154010] Loading iSCSI transport class v2.0-870. [ 6.157378] initcall iscsi_transport_init+0x0/0x173 returned 0 after 2929 usecs [ 6.158161] calling sas_transport_init+0x0/0xe1 @ 1 [ 6.161320] initcall sas_transport_init+0x0/0xe1 returned 0 after 1953 usecs [ 6.163017] calling sas_class_init+0x0/0x58 @ 1 [ 6.165074] initcall sas_class_init+0x0/0x58 returned 0 after 976 usecs [ 6.167174] calling srp_transport_init+0x0/0x65 @ 1 [ 6.168165] initcall srp_transport_init+0x0/0x65 returned 0 after 0 usecs [ 6.169078] calling scsi_dh_init+0x0/0x65 @ 1 [ 6.170014] initcall scsi_dh_init+0x0/0x65 returned 0 after 0 usecs [ 6.171011] calling rdac_init+0x0/0x55 @ 1 [ 6.172060] rdac: device handler registered [ 6.173060] initcall rdac_init+0x0/0x55 returned 0 after 976 usecs [ 6.174011] calling libfc_init+0x0/0x96 @ 1 [ 6.176492] initcall libfc_init+0x0/0x96 returned 0 after 976 usecs [ 6.177097] calling fcoe_init+0x0/0x1ab @ 1 [ 6.179229] initcall fcoe_init+0x0/0x1ab returned 0 after 976 usecs [ 6.186083] calling advansys_init+0x0/0x42 @ 1 [ 6.191095] initcall advansys_init+0x0/0x42 returned 0 after 976 usecs [ 6.197071] calling BusLogic_init+0x0/0x5b2 @ 1 [ 6.202179] initcall BusLogic_init+0x0/0x5b2 returned 0 after 0 usecs [ 6.208011] calling adpt_init+0x0/0xb1 @ 1 [ 6.213010] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 6.218010] Detecting Adaptec I2O RAID controllers... [ 6.223035] initcall adpt_init+0x0/0xb1 returned -19 after 9765 usecs [ 6.230014] calling arcmsr_module_init+0x0/0x47 @ 1 [ 6.235592] initcall arcmsr_module_init+0x0/0x47 returned 0 after 0 usecs [ 6.242012] calling ahc_linux_init+0x0/0x8d @ 1 [ 6.247414] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs [ 6.253012] calling ahd_linux_init+0x0/0xa7 @ 1 [ 6.258894] initcall ahd_linux_init+0x0/0xa7 returned 0 after 0 usecs [ 6.265012] calling aac_init+0x0/0x95 @ 1 [ 6.269011] Adaptec aacraid driver 1.1-5[2461]-ms [ 6.274556] initcall aac_init+0x0/0x95 returned 0 after 4882 usecs [ 6.280012] calling aic94xx_init+0x0/0x160 @ 1 [ 6.285011] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 6.293394] initcall aic94xx_init+0x0/0x160 returned 0 after 7812 usecs [ 6.300016] calling ips_module_init+0x0/0x8e @ 1 [ 6.305495] initcall ips_module_init+0x0/0x8e returned -19 after 0 usecs [ 6.312013] calling init_this_scsi_driver+0x0/0x10c @ 1 [ 6.317095] scsi: <fdomain> Detection failed (no card) [ 6.323013] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 5859 usecs [ 6.330012] calling qla1280_init+0x0/0x42 @ 1 [ 6.335468] initcall qla1280_init+0x0/0x42 returned 0 after 0 usecs [ 6.341013] calling qla2x00_module_init+0x0/0x152 @ 1 [ 6.347537] QLogic Fibre Channel HBA Driver: 8.03.01-k4 [ 6.353200] initcall qla2x00_module_init+0x0/0x152 returned 0 after 6835 usecs [ 6.360013] calling qla4xxx_module_init+0x0/0x108 @ 1 [ 6.366306] iscsi: registered transport (qla4xxx) [ 6.371738] QLogic iSCSI HBA Driver [ 6.375014] initcall qla4xxx_module_init+0x0/0x108 returned 0 after 9765 usecs [ 6.382012] calling lpfc_init+0x0/0xfb @ 1 [ 6.386010] Emulex LightPulse Fibre Channel SCSI driver 8.3.3 [ 6.392010] Copyright(c) 2004-2009 Emulex. All rights reserved. [ 6.398828] initcall lpfc_init+0x0/0xfb returned 0 after 11718 usecs [ 6.405013] calling init_this_scsi_driver+0x0/0x10c @ 1 [ 6.410038] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs [ 6.417012] calling dc395x_module_init+0x0/0x42 @ 1 [ 6.423208] initcall dc395x_module_init+0x0/0x42 returned 0 after 976 usecs [ 6.430013] calling dc390_module_init+0x0/0xbf @ 1 [ 6.435011] DC390: clustering now enabled by default. If you get problems load [ 6.442010] with "disable_clustering=1" and report to maintainers [ 6.449390] initcall dc390_module_init+0x0/0xbf returned 0 after 13671 usecs [ 6.456013] calling megasas_init+0x0/0x180 @ 1 [ 6.461011] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 6.467216] initcall megasas_init+0x0/0x180 returned 0 after 5859 usecs [ 6.473013] calling _scsih_init+0x0/0x117 @ 1 [ 6.478011] mpt2sas version 01.100.03.00 loaded [ 6.483435] initcall _scsih_init+0x0/0x117 returned 0 after 4882 usecs [ 6.490013] calling initio_init_driver+0x0/0x42 @ 1 [ 6.495652] initcall initio_init_driver+0x0/0x42 returned 0 after 0 usecs [ 6.502012] calling tw_init+0x0/0x55 @ 1 [ 6.506011] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 6.513740] initcall tw_init+0x0/0x55 returned 0 after 6835 usecs [ 6.519013] calling twa_init+0x0/0x55 @ 1 [ 6.523011] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. [ 6.531639] initcall twa_init+0x0/0x55 returned 0 after 7812 usecs [ 6.537013] calling ppa_driver_init+0x0/0x4c @ 1 [ 6.542011] ppa: Version 2.07 (for Linux 2.4.x) [ 6.549093] initcall ppa_driver_init+0x0/0x4c returned 0 after 6835 usecs [ 6.556015] calling imm_driver_init+0x0/0x4c @ 1 [ 6.561011] imm: Version 2.05 (for Linux 2.4.0) [ 6.565486] initcall imm_driver_init+0x0/0x4c returned 0 after 4882 usecs [ 6.572012] calling ipr_init+0x0/0x5c @ 1 [ 6.577011] ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009) [ 6.584872] initcall ipr_init+0x0/0x5c returned 0 after 6835 usecs [ 6.591013] calling mvs_init+0x0/0x79 @ 1 [ 6.595636] initcall mvs_init+0x0/0x79 returned 0 after 0 usecs [ 6.601013] calling cxgb3i_init_module+0x0/0x5d @ 1 [ 6.606012] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 6.612665] iscsi: registered transport (cxgb3i) [ 6.617054] initcall cxgb3i_init_module+0x0/0x5d returned 0 after 10742 usecs [ 6.624013] calling init_st+0x0/0x129 @ 1 [ 6.628012] st: Version 20081215, fixed bufsize 32768, s/g segs 256 [ 6.635271] initcall init_st+0x0/0x129 returned 0 after 6835 usecs [ 6.641013] calling init_osst+0x0/0x160 @ 1 [ 6.646011] osst :I: Tape driver with OnStream support version 0.99.4 [ 6.646014] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 6.659544] initcall init_osst+0x0/0x160 returned 0 after 12695 usecs [ 6.666013] calling init_sd+0x0/0x125 @ 1 [ 6.671104] initcall init_sd+0x0/0x125 returned 0 after 976 usecs [ 6.677013] calling osd_uld_init+0x0/0xfe @ 1 [ 6.682387] osd: LOADED open-osd 0.1.0 [ 6.686014] initcall osd_uld_init+0x0/0xfe returned 0 after 4882 usecs [ 6.692066] calling ahci_init+0x0/0x42 @ 1 [ 6.697411] initcall ahci_init+0x0/0x42 returned 0 after 0 usecs [ 6.703076] calling piix_init+0x0/0x50 @ 1 [ 6.708112] initcall piix_init+0x0/0x50 returned 0 after 976 usecs [ 6.714017] calling pdc_ata_init+0x0/0x42 @ 1 [ 6.719137] initcall pdc_ata_init+0x0/0x42 returned 0 after 976 usecs [ 6.725013] calling sil_init+0x0/0x42 @ 1 [ 6.730077] initcall sil_init+0x0/0x42 returned 0 after 976 usecs [ 6.736013] calling vsc_sata_init+0x0/0x42 @ 1 [ 6.741126] initcall vsc_sata_init+0x0/0x42 returned 0 after 976 usecs [ 6.747013] calling sis_init+0x0/0x42 @ 1 [ 6.752154] initcall sis_init+0x0/0x42 returned 0 after 976 usecs [ 6.758013] calling pdc_sata_init+0x0/0x42 @ 1 [ 6.763181] initcall pdc_sata_init+0x0/0x42 returned 0 after 976 usecs [ 6.769013] calling nv_init+0x0/0x42 @ 1 [ 6.774132] initcall nv_init+0x0/0x42 returned 0 after 976 usecs [ 6.780013] calling uli_init+0x0/0x42 @ 1 [ 6.784636] initcall uli_init+0x0/0x42 returned 0 after 0 usecs [ 6.790013] calling mv_init+0x0/0x6e @ 1 [ 6.794969] initcall mv_init+0x0/0x6e returned 0 after 976 usecs [ 6.801067] calling adma_ata_init+0x0/0x42 @ 1 [ 6.806356] initcall adma_ata_init+0x0/0x42 returned 0 after 0 usecs [ 6.812073] calling amd_init+0x0/0x42 @ 1 [ 6.817185] pata_amd 0000:00:06.0: version 0.4.1 [ 6.819026] pata_amd 0000:00:06.0: setting latency timer to 64 [ 6.821171] scsi0 : pata_amd [ 6.824443] scsi1 : pata_amd [ 6.825335] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 6.826077] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 6.987045] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 6.993014] ata1.00: 488397168 sectors, multi 1: LBA48 [ 6.998036] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 [ 7.017255] ata1.00: configured for UDMA/100 [ 7.022321] async_waiting @ 2169 [ 7.023013] async_continuing @ 2169 after 0 usec [ 7.025018] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 7.028045] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7.029355] sd 0:0:0:0: [sda] Write Protect is off [ 7.030015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.031182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.034265] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 7.138539] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.140606] async_waiting @ 2169 [ 7.141070] async_continuing @ 2169 after 0 usec [ 7.295315] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 [ 7.296035] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 [ 7.303226] ata2.01: configured for UDMA/33 [ 7.305193] async_waiting @ 2169 [ 7.306013] async_continuing @ 2169 after 0 usec [ 7.307255] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 [ 7.310217] work_for_cpu used greatest stack depth: 2448 bytes left [ 7.310296] initcall amd_init+0x0/0x42 returned 0 after 482422 usecs [ 7.310302] calling artop_init+0x0/0x42 @ 1 [ 7.310660] initcall artop_init+0x0/0x42 returned 0 after 0 usecs [ 7.310664] calling atiixp_init+0x0/0x42 @ 1 [ 7.311001] initcall atiixp_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cmd640_init+0x0/0x42 @ 1 [ 7.311005] initcall cmd640_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cmd64x_init+0x0/0x42 @ 1 [ 7.311005] initcall cmd64x_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cs5520_init+0x0/0x42 @ 1 [ 7.311005] initcall cs5520_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cy82c693_init+0x0/0x42 @ 1 [ 7.311005] initcall cy82c693_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling efar_init+0x0/0x42 @ 1 [ 7.311005] initcall efar_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling hpt36x_init+0x0/0x42 @ 1 [ 7.311005] initcall hpt36x_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling it821x_init+0x0/0x42 @ 1 [ 7.311005] initcall it821x_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling netcell_init+0x0/0x42 @ 1 [ 7.311005] initcall netcell_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling ninja32_init+0x0/0x42 @ 1 [ 7.311005] initcall ninja32_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling opti_init+0x0/0x42 @ 1 [ 7.311005] initcall opti_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling marvell_init+0x0/0x42 @ 1 [ 7.311005] initcall marvell_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling mpiix_init+0x0/0x42 @ 1 [ 7.311005] initcall mpiix_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling oldpiix_init+0x0/0x42 @ 1 [ 7.311005] initcall oldpiix_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling radisys_init+0x0/0x42 @ 1 [ 7.311005] initcall radisys_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling rz1000_init+0x0/0x42 @ 1 [ 7.311005] initcall rz1000_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling serverworks_init+0x0/0x42 @ 1 [ 7.311005] initcall serverworks_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling sis_init+0x0/0x42 @ 1 [ 7.311005] initcall sis_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling triflex_init+0x0/0x42 @ 1 [ 7.311005] initcall triflex_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling ata_generic_init+0x0/0x42 @ 1 [ 7.311005] initcall ata_generic_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling e1000_init_module+0x0/0xab @ 1 [ 7.311005] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 7.311005] Copyright (c) 1999-2006 Intel Corporation. [ 7.311005] initcall e1000_init_module+0x0/0xab returned 0 after 0 usecs [ 7.311005] calling e1000_init_module+0x0/0x8f @ 1 [ 7.311005] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 7.311005] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 7.311005] initcall e1000_init_module+0x0/0x8f returned 0 after 0 usecs [ 7.311005] calling igb_init_module+0x0/0x7b @ 1 [ 7.311005] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 7.311005] Copyright (c) 2007-2009 Intel Corporation. [ 7.311005] initcall igb_init_module+0x0/0x7b returned 0 after 0 usecs [ 7.311005] calling ixgbe_init_module+0x0/0x7f @ 1 [ 7.311005] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.34-k2 [ 7.311005] ixgbe: Copyright (c) 1999-2009 Intel Corporation. [ 7.311005] initcall ixgbe_init_module+0x0/0x7f returned 0 after 0 usecs [ 7.311005] calling ixgb_init_module+0x0/0x71 @ 1 [ 7.311005] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 7.311005] Copyright (c) 1999-2008 Intel Corporation. [ 7.311005] initcall ixgb_init_module+0x0/0x71 returned 0 after 0 usecs [ 7.311005] calling cxgb3_init_module+0x0/0x47 @ 1 [ 7.311005] initcall cxgb3_init_module+0x0/0x47 returned 0 after 0 usecs [ 7.311005] calling atl1_init_module+0x0/0x42 @ 1 [ 7.311005] initcall atl1_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling atl2_init_module+0x0/0x71 @ 1 [ 7.311005] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 7.311005] Copyright (c) 2007 Atheros Corporation. [ 7.311005] initcall atl2_init_module+0x0/0x71 returned 0 after 0 usecs [ 7.311005] calling atl1e_init_module+0x0/0x42 @ 1 [ 7.311005] initcall atl1e_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling atl1c_init_module+0x0/0x42 @ 1 [ 7.311005] initcall atl1c_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling bdx_module_init+0x0/0xb0 @ 1 [ 7.311005] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 7.311005] tehuti: Options: hw_csum [ 7.311005] initcall bdx_module_init+0x0/0xb0 returned 0 after 0 usecs [ 7.311005] calling enic_init_module+0x0/0x5c @ 1 [ 7.311005] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933 [ 7.311005] initcall enic_init_module+0x0/0x5c returned 0 after 0 usecs [ 7.311005] calling jme_init_module+0x0/0x55 @ 1 [ 7.311005] jme: JMicron JMC2XX ethernet driver version 1.0.4 [ 7.311005] initcall jme_init_module+0x0/0x55 returned 0 after 0 usecs [ 7.311005] calling be_init_module+0x0/0x9d @ 1 [ 7.311005] initcall be_init_module+0x0/0x9d returned 0 after 0 usecs [ 7.311005] calling plip_init+0x0/0x84 @ 1 [ 7.311005] plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient! [ 7.311005] NET3 PLIP version 2.4-parport [email protected] [ 7.311005] plip0: Parallel port at 0x378, not using IRQ. [ 7.311005] initcall plip_init+0x0/0x84 returned 0 after 0 usecs [ 7.311005] calling rr_init_module+0x0/0x42 @ 1 [ 7.311005] initcall rr_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling happy_meal_probe+0x0/0x42 @ 1 [ 7.311005] initcall happy_meal_probe+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling gem_init+0x0/0x42 @ 1 [ 7.311005] initcall gem_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cas_init+0x0/0x64 @ 1 [ 7.311005] initcall cas_init+0x0/0x64 returned 0 after 0 usecs [ 7.311005] calling vortex_init+0x0/0xd8 @ 1 [ 7.311005] initcall vortex_init+0x0/0xd8 returned 0 after 0 usecs [ 7.311005] calling ne2k_pci_init+0x0/0x42 @ 1 [ 7.311005] initcall ne2k_pci_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling pcnet32_init_module+0x0/0x154 @ 1 [ 7.311005] pcnet32.c:v1.35 21.Apr.2008 [email protected] [ 7.311005] initcall pcnet32_init_module+0x0/0x154 returned 0 after 0 usecs [ 7.311005] calling e100_init_module+0x0/0x81 @ 1 [ 7.311005] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 7.311005] e100: Copyright(c) 1999-2006 Intel Corporation [ 7.311005] initcall e100_init_module+0x0/0x81 returned 0 after 0 usecs [ 7.311005] calling tlan_probe+0x0/0x108 @ 1 [ 7.311005] ThunderLAN driver v1.15a [ 7.311005] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 7.311005] initcall tlan_probe+0x0/0x108 returned -19 after 0 usecs [ 7.311005] calling r6040_init+0x0/0x42 @ 1 [ 7.311005] initcall r6040_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling acenic_init+0x0/0x42 @ 1 [ 7.311005] initcall acenic_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling natsemi_init_mod+0x0/0x42 @ 1 [ 7.311005] initcall natsemi_init_mod+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling fealnx_init+0x0/0x42 @ 1 [ 7.311005] initcall fealnx_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling tg3_init+0x0/0x42 @ 1 [ 7.311005] initcall tg3_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling ks8842_init+0x0/0x39 @ 1 [ 7.311005] initcall ks8842_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling ks8851_init+0x0/0x39 @ 1 [ 7.311005] initcall ks8851_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling velocity_init_module+0x0/0x42 @ 1 [ 7.311005] initcall velocity_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling starfire_init+0x0/0x42 @ 1 [ 7.311005] initcall starfire_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling davicom_init+0x0/0x83 @ 1 [ 7.311005] initcall davicom_init+0x0/0x83 returned 0 after 0 usecs [ 7.311005] calling cicada_init+0x0/0x65 @ 1 [ 7.311005] initcall cicada_init+0x0/0x65 returned 0 after 0 usecs [ 7.311005] calling vsc82xx_init+0x0/0x65 @ 1 [ 7.311005] initcall vsc82xx_init+0x0/0x65 returned 0 after 0 usecs [ 7.311005] calling broadcom_init+0x0/0x125 @ 1 [ 7.311005] initcall broadcom_init+0x0/0x125 returned 0 after 0 usecs [ 7.311005] calling ip175c_init+0x0/0x39 @ 1 [ 7.311005] initcall ip175c_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling realtek_init+0x0/0x39 @ 1 [ 7.311005] initcall realtek_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling et1011c_init+0x0/0x39 @ 1 [ 7.311005] initcall et1011c_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling fixed_mdio_bus_init+0x0/0xf6 @ 1 [ 7.311005] Fixed MDIO Bus: probed [ 7.311005] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 0 usecs [ 7.311005] calling hamachi_init+0x0/0x42 @ 1 [ 7.311005] initcall hamachi_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling net_olddevs_init+0x0/0x45 @ 1 [ 7.311005] D-Link DE-620 pocket adapter io 0x378, which is busy. [ 7.311005] initcall net_olddevs_init+0x0/0x45 returned 0 after 0 usecs [ 7.311005] calling hp100_module_init+0x0/0x42 @ 1 [ 7.311005] initcall hp100_module_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling b44_init+0x0/0x89 @ 1 [ 7.311005] initcall b44_init+0x0/0x89 returned 0 after 0 usecs [ 7.311005] calling init_nic+0x0/0x42 @ 1 [ 7.312567] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 7.314071] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 7.315021] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 7.316017] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 7.317128] nv_probe: set workaround bit for reversed mac addr [ 7.831213] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 [ 7.832015] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 7.833014] initcall init_nic+0x0/0x42 returned 0 after 511719 usecs [ 7.840071] calling ql3xxx_init_module+0x0/0x42 @ 1 [ 7.846199] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 976 usecs [ 7.853073] calling ppp_init+0x0/0x104 @ 1 [ 7.857067] PPP generic driver version 2.4.2 [ 7.862343] initcall ppp_init+0x0/0x104 returned 0 after 4882 usecs [ 7.869016] calling ppp_async_init+0x0/0x5c @ 1 [ 7.873016] initcall ppp_async_init+0x0/0x5c returned 0 after 0 usecs [ 7.880014] calling ppp_sync_init+0x0/0x5c @ 1 [ 7.884015] initcall ppp_sync_init+0x0/0x5c returned 0 after 0 usecs [ 7.891014] calling pppox_init+0x0/0x39 @ 1 [ 7.895014] NET: Registered protocol family 24 [ 7.899017] initcall pppox_init+0x0/0x39 returned 0 after 3906 usecs [ 7.906014] calling pppoe_init+0x0/0xaf @ 1 [ 7.910051] initcall pppoe_init+0x0/0xaf returned 0 after 0 usecs [ 7.916014] calling pppol2tp_init+0x0/0xa8 @ 1 [ 7.921047] PPPoL2TP kernel driver, V1.0 [ 7.925015] initcall pppol2tp_init+0x0/0xa8 returned 0 after 3906 usecs [ 7.931014] calling slip_init+0x0/0xe6 @ 1 [ 7.935013] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 7.945012] CSLIP: code copyright 1989 Regents of the University of California. [ 7.952012] SLIP linefill/keepalive option. [ 7.957024] initcall slip_init+0x0/0xe6 returned 0 after 21484 usecs [ 7.963014] calling dummy_init_module+0x0/0xd8 @ 1 [ 7.969159] initcall dummy_init_module+0x0/0xd8 returned 0 after 976 usecs [ 7.976015] calling macvlan_init_module+0x0/0x79 @ 1 [ 7.981017] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs [ 7.988013] calling de600_init+0x0/0x48 @ 1 [ 7.992034] DE600: port 0x378 busy [ 7.995078] initcall de600_init+0x0/0x48 returned -16 after 2929 usecs [ 8.002019] initcall de600_init+0x0/0x48 returned with error code -16 [ 8.008014] calling dfx_init+0x0/0x47 @ 1 [ 8.013399] initcall dfx_init+0x0/0x47 returned 0 after 0 usecs [ 8.019015] calling cp_init+0x0/0x42 @ 1 [ 8.023572] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 8.024014] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 8.025013] initcall cp_init+0x0/0x42 returned 0 after 1953 usecs [ 8.032072] calling rtl8139_init_module+0x0/0x42 @ 1 [ 8.037502] 8139too Fast Ethernet driver 0.9.28 [ 8.038056] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 8.040671] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11 [ 8.041427] initcall rtl8139_init_module+0x0/0x42 returned 0 after 3906 usecs [ 8.049073] calling atp_init_module+0x0/0xbf @ 1 [ 8.053134] atp.c:v1.09=ac 2002/10/01 Donald Becker <[email protected]> [ 8.060101] initcall atp_init_module+0x0/0xbf returned -19 after 6835 usecs [ 8.067079] calling sc92031_init+0x0/0x42 @ 1 [ 8.072497] initcall sc92031_init+0x0/0x42 returned 0 after 0 usecs [ 8.078073] calling eql_init_module+0x0/0x89 @ 1 [ 8.083016] Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected]) [ 8.092665] initcall eql_init_module+0x0/0x89 returned 0 after 8789 usecs [ 8.099015] calling tun_init+0x0/0xb7 @ 1 [ 8.103013] tun: Universal TUN/TAP device driver, 1.6 [ 8.108012] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 8.115429] initcall tun_init+0x0/0xb7 returned 0 after 11718 usecs [ 8.121016] calling veth_init+0x0/0x39 @ 1 [ 8.125016] initcall veth_init+0x0/0x39 returned 0 after 0 usecs [ 8.131014] calling rio_init+0x0/0x42 @ 1 [ 8.136422] initcall rio_init+0x0/0x42 returned 0 after 0 usecs [ 8.142015] calling rtl8169_init_module+0x0/0x42 @ 1 [ 8.147805] initcall rtl8169_init_module+0x0/0x42 returned 0 after 0 usecs [ 8.154015] calling amd8111e_init+0x0/0x42 @ 1 [ 8.159616] initcall amd8111e_init+0x0/0x42 returned 0 after 0 usecs [ 8.166015] calling myri10ge_init_module+0x0/0x99 @ 1 [ 8.171013] myri10ge: Version 1.5.0-1.418 [ 8.175540] initcall myri10ge_init_module+0x0/0x99 returned 0 after 3906 usecs [ 8.182014] calling mlx4_init+0x0/0xcb @ 1 [ 8.187263] initcall mlx4_init+0x0/0xcb returned 0 after 0 usecs [ 8.193015] calling mlx4_en_init+0x0/0x39 @ 1 [ 8.198071] initcall mlx4_en_init+0x0/0x39 returned 0 after 0 usecs [ 8.204014] calling enc28j60_init+0x0/0x4a @ 1 [ 8.209200] initcall enc28j60_init+0x0/0x4a returned 0 after 976 usecs [ 8.215015] calling ethoc_init+0x0/0x39 @ 1 [ 8.220377] initcall ethoc_init+0x0/0x39 returned 0 after 0 usecs [ 8.226015] calling dnet_init+0x0/0x39 @ 1 [ 8.231079] initcall dnet_init+0x0/0x39 returned 0 after 976 usecs [ 8.237015] calling ipddp_init_module+0x0/0x48 @ 1 [ 8.242027] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <[email protected]> [ 8.250318] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <[email protected]> [ 8.259016] initcall ipddp_init_module+0x0/0x48 returned 0 after 16601 usecs [ 8.266014] calling olympic_pci_init+0x0/0x42 @ 1 [ 8.271460] initcall olympic_pci_init+0x0/0x42 returned 0 after 0 usecs [ 8.278015] calling xl_pci_init+0x0/0x42 @ 1 [ 8.282840] initcall xl_pci_init+0x0/0x42 returned 0 after 0 usecs [ 8.289017] calling arcnet_init+0x0/0x84 @ 1 [ 8.293012] arcnet loaded. [ 8.296015] initcall arcnet_init+0x0/0x84 returned 0 after 2929 usecs [ 8.302014] calling arcnet_rfc1201_init+0x0/0x98 @ 1 [ 8.307012] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 8.314014] initcall arcnet_rfc1201_init+0x0/0x98 returned 0 after 6835 usecs [ 8.321014] calling arcnet_rfc1051_init+0x0/0x6c @ 1 [ 8.326012] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 8.334014] initcall arcnet_rfc1051_init+0x0/0x6c returned 0 after 7812 usecs [ 8.341014] calling arcnet_raw_init+0x0/0x80 @ 1 [ 8.346012] arcnet: raw mode (`r') encapsulation support loaded. [ 8.352015] initcall arcnet_raw_init+0x0/0x80 returned 0 after 5859 usecs [ 8.358014] calling com90io_init+0x0/0x91 @ 1 [ 8.363057] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 8.370012] E-mail me if you actually test this driver, please! [ 8.376014] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 8.384097] initcall com90io_init+0x0/0x91 returned -19 after 20507 usecs [ 8.391019] calling com20020pci_init+0x0/0x57 @ 1 [ 8.396012] arcnet: COM20020 PCI support [ 8.400605] initcall com20020pci_init+0x0/0x57 returned 0 after 3906 usecs [ 8.407015] calling catc_init+0x0/0x5e @ 1 [ 8.412124] usbcore: registered new interface driver catc [ 8.417024] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 8.423015] initcall catc_init+0x0/0x5e returned 0 after 11718 usecs [ 8.429014] calling kaweth_init+0x0/0x42 @ 1 [ 8.434550] usbcore: registered new interface driver kaweth [ 8.440026] initcall kaweth_init+0x0/0x42 returned 0 after 5859 usecs [ 8.446014] calling usb_rtl8150_init+0x0/0x4e @ 1 [ 8.451012] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 8.458595] usbcore: registered new interface driver rtl8150 [ 8.464021] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 12695 usecs [ 8.471014] calling asix_init+0x0/0x42 @ 1 [ 8.475757] usbcore: registered new interface driver asix [ 8.481022] initcall asix_init+0x0/0x42 returned 0 after 5859 usecs [ 8.487014] calling cdc_init+0x0/0x42 @ 1 [ 8.491903] usbcore: registered new interface driver cdc_ether [ 8.497022] initcall cdc_init+0x0/0x42 returned 0 after 5859 usecs [ 8.503014] calling eem_init+0x0/0x42 @ 1 [ 8.508387] usbcore: registered new interface driver cdc_eem [ 8.514021] initcall eem_init+0x0/0x42 returned 0 after 5859 usecs [ 8.520014] calling dm9601_init+0x0/0x42 @ 1 [ 8.524950] usbcore: registered new interface driver dm9601 [ 8.530022] initcall dm9601_init+0x0/0x42 returned 0 after 5859 usecs [ 8.537014] calling smsc95xx_init+0x0/0x42 @ 1 [ 8.541863] usbcore: registered new interface driver smsc95xx [ 8.547023] initcall smsc95xx_init+0x0/0x42 returned 0 after 5859 usecs [ 8.554014] calling usbnet_init+0x0/0x42 @ 1 [ 8.558948] usbcore: registered new interface driver gl620a [ 8.564022] initcall usbnet_init+0x0/0x42 returned 0 after 5859 usecs [ 8.571014] calling plusb_init+0x0/0x42 @ 1 [ 8.575602] usbcore: registered new interface driver plusb [ 8.581033] initcall plusb_init+0x0/0x42 returned 0 after 5859 usecs [ 8.587014] calling rndis_init+0x0/0x42 @ 1 [ 8.592080] usbcore: registered new interface driver rndis_host [ 8.598022] initcall rndis_init+0x0/0x42 returned 0 after 6835 usecs [ 8.604014] calling zaurus_init+0x0/0x42 @ 1 [ 8.609080] usbcore: registered new interface driver zaurus [ 8.614022] initcall zaurus_init+0x0/0x42 returned 0 after 5859 usecs [ 8.621014] calling usbnet_init+0x0/0x52 @ 1 [ 8.625024] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs [ 8.631014] calling usbpn_init+0x0/0x42 @ 1 [ 8.636331] usbcore: registered new interface driver cdc_phonet [ 8.642022] initcall usbpn_init+0x0/0x42 returned 0 after 5859 usecs [ 8.648014] calling ipw_init+0x0/0xad @ 1 [ 8.652012] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdq [ 8.659012] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 8.666001] initcall ipw_init+0x0/0xad returned 0 after 13671 usecs [ 8.672016] calling ieee80211_init+0x0/0xda @ 1 [ 8.676044] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 8.683013] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 8.691014] initcall ieee80211_init+0x0/0xda returned 0 after 14648 usecs [ 8.698014] calling strip_init_driver+0x0/0x8e @ 1 [ 8.703024] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) [ 8.710041] initcall strip_init_driver+0x0/0x8e returned 0 after 6835 usecs [ 8.717015] calling init_orinoco+0x0/0x42 @ 1 [ 8.721013] orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al) [ 8.731015] initcall init_orinoco+0x0/0x42 returned 0 after 9765 usecs [ 8.737014] calling orinoco_plx_init+0x0/0x55 @ 1 [ 8.742013] orinoco_plx 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]>, Daniel Barlow <[email protected]>) [ 8.755327] initcall orinoco_plx_init+0x0/0x55 returned 0 after 12695 usecs [ 8.762016] calling orinoco_pci_init+0x0/0x55 @ 1 [ 8.767013] orinoco_pci 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]> & Jean Tourrilhes <[email protected]>) [ 8.780062] initcall orinoco_pci_init+0x0/0x55 returned 0 after 12695 usecs [ 8.787015] calling orinoco_tmd_init+0x0/0x55 @ 1 [ 8.791013] orinoco_tmd 0.15 (Joerg Dorchain <[email protected]>) [ 8.798396] initcall orinoco_tmd_init+0x0/0x55 returned 0 after 6835 usecs [ 8.805017] calling airo_init_module+0x0/0x110 @ 1 [ 8.810034] airo(): Probing for PCI adapters [ 8.814854] airo(): Finished probing for PCI adapters [ 8.819016] initcall airo_init_module+0x0/0x110 returned 0 after 8789 usecs [ 8.826015] calling atmel_init_module+0x0/0x42 @ 1 [ 8.832150] initcall atmel_init_module+0x0/0x42 returned 0 after 976 usecs [ 8.839016] calling at76_mod_init+0x0/0x99 @ 1 [ 8.843013] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 8.849590] usbcore: registered new interface driver at76c50x-usb [ 8.855163] initcall at76_mod_init+0x0/0x99 returned 0 after 11718 usecs [ 8.862015] calling prism54_module_init+0x0/0x5c @ 1 [ 8.867013] Loaded prism54 driver, version 1.2 [ 8.872456] initcall prism54_module_init+0x0/0x5c returned 0 after 4882 usecs [ 8.879015] calling hostap_init+0x0/0x6c @ 1 [ 8.884032] initcall hostap_init+0x0/0x6c returned 0 after 0 usecs [ 8.890015] calling b43_init+0x0/0x7b @ 1 [ 8.894685] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 8.901016] initcall b43_init+0x0/0x7b returned 0 after 6835 usecs [ 8.907014] calling b43legacy_init+0x0/0x82 @ 1 [ 8.912829] Broadcom 43xx-legacy driver loaded [ Features: PLD, Firmware-ID: FW10 ] [ 8.920016] initcall b43legacy_init+0x0/0x82 returned 0 after 7812 usecs [ 8.927015] calling rtl8180_init+0x0/0x42 @ 1 [ 8.932104] initcall rtl8180_init+0x0/0x42 returned 0 after 976 usecs [ 8.938016] calling rtl8187_init+0x0/0x42 @ 1 [ 8.943368] usbcore: registered new interface driver rtl8187 [ 8.949022] initcall rtl8187_init+0x0/0x42 returned 0 after 5859 usecs [ 8.955015] calling rndis_wlan_init+0x0/0x42 @ 1 [ 8.960632] usbcore: registered new interface driver rndis_wlan [ 8.966022] initcall rndis_wlan_init+0x0/0x42 returned 0 after 5859 usecs [ 8.973015] calling zd1201_init+0x0/0x42 @ 1 [ 8.978078] usbcore: registered new interface driver zd1201 [ 8.983022] initcall zd1201_init+0x0/0x42 returned 0 after 5859 usecs [ 8.990015] calling lbs_init_module+0x0/0x5d @ 1 [ 8.994032] initcall lbs_init_module+0x0/0x5d returned 0 after 0 usecs [ 9.001015] calling if_usb_init_module+0x0/0x42 @ 1 [ 9.006709] usbcore: registered new interface driver usb8xxx [ 9.012022] initcall if_usb_init_module+0x0/0x42 returned 0 after 5859 usecs [ 9.019015] calling if_spi_init_module+0x0/0x45 @ 1 [ 9.024013] libertas_spi: Libertas SPI driver [ 9.029127] initcall if_spi_init_module+0x0/0x45 returned 0 after 4882 usecs [ 9.036016] calling lbtf_init_module+0x0/0x6c @ 1 [ 9.041166] initcall lbtf_init_module+0x0/0x6c returned 0 after 0 usecs [ 9.047017] calling if_usb_init_module+0x0/0x42 @ 1 [ 9.053212] usbcore: registered new interface driver lbtf_usb [ 9.058023] initcall if_usb_init_module+0x0/0x42 returned 0 after 6835 usecs [ 9.066017] calling mwl8k_init+0x0/0x42 @ 1 [ 9.070697] initcall mwl8k_init+0x0/0x42 returned 0 after 0 usecs [ 9.076015] calling init_ath5k_pci+0x0/0x5e @ 1 [ 9.081821] initcall init_ath5k_pci+0x0/0x5e returned 0 after 0 usecs [ 9.088016] calling ath9k_init+0x0/0x95 @ 1 [ 9.092953] initcall ath9k_init+0x0/0x95 returned 0 after 0 usecs [ 9.099015] calling ar9170_init+0x0/0x42 @ 1 [ 9.103773] usbcore: registered new interface driver ar9170usb [ 9.109022] initcall ar9170_init+0x0/0x42 returned 0 after 5859 usecs [ 9.116015] calling init_mac80211_hwsim+0x0/0x535 @ 1 [ 9.121570] mac80211_hwsim: Initializing radio 0 [ 9.129267] phy0: Selected rate control algorithm 'minstrel' [ 9.136405] phy0: hwaddr 02:00:00:00:00:00 registered [ 9.141127] mac80211_hwsim: Initializing radio 1 [ 9.148297] phy1: Selected rate control algorithm 'minstrel' [ 9.155186] phy1: hwaddr 02:00:00:00:01:00 registered [ 9.160936] initcall init_mac80211_hwsim+0x0/0x535 returned 0 after 39062 usecs [ 9.168017] calling wl12xx_init+0x0/0x57 @ 1 [ 9.173080] initcall wl12xx_init+0x0/0x57 returned 0 after 976 usecs [ 9.179016] calling usb_irda_init+0x0/0x65 @ 1 [ 9.184348] usbcore: registered new interface driver irda-usb [ 9.190022] USB IrDA support registered [ 9.193016] initcall usb_irda_init+0x0/0x65 returned 0 after 8789 usecs [ 9.200015] calling stir_init+0x0/0x42 @ 1 [ 9.205122] usbcore: registered new interface driver stir4200 [ 9.210022] initcall stir_init+0x0/0x42 returned 0 after 5859 usecs [ 9.217015] calling nsc_ircc_init+0x0/0x1fd @ 1 [ 9.221014] Platform driver 'nsc-ircc' needs updating - please use dev_pm_ops [ 9.229322] initcall nsc_ircc_init+0x0/0x1fd returned -19 after 7812 usecs [ 9.236017] calling w83977af_init+0x0/0x74 @ 1 [ 9.241072] initcall w83977af_init+0x0/0x74 returned -19 after 0 usecs [ 9.247015] calling smsc_ircc_init+0x0/0x87 @ 1 [ 9.252013] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops [ 9.260484] initcall smsc_ircc_init+0x0/0x87 returned -19 after 7812 usecs [ 9.267015] calling ali_ircc_init+0x0/0x196 @ 1 [ 9.272013] Platform driver 'ali-ircc' needs updating - please use dev_pm_ops [ 9.279555] initcall ali_ircc_init+0x0/0x196 returned -19 after 6835 usecs [ 9.286015] calling vlsi_mod_init+0x0/0x151 @ 1 [ 9.291809] initcall vlsi_mod_init+0x0/0x151 returned 0 after 0 usecs [ 9.298015] calling irtty_sir_init+0x0/0x65 @ 1 [ 9.302016] initcall irtty_sir_init+0x0/0x65 returned 0 after 0 usecs [ 9.309014] calling sir_wq_init+0x0/0x5c @ 1 [ 9.313865] initcall sir_wq_init+0x0/0x5c returned 0 after 0 usecs [ 9.320016] calling tekram_sir_init+0x0/0x52 @ 1 [ 9.324082] initcall tekram_sir_init+0x0/0x52 returned 0 after 0 usecs [ 9.331015] calling actisys_sir_init+0x0/0x69 @ 1 [ 9.336018] initcall actisys_sir_init+0x0/0x69 returned 0 after 0 usecs [ 9.342015] calling litelink_sir_init+0x0/0x39 @ 1 [ 9.347017] initcall litelink_sir_init+0x0/0x39 returned 0 after 0 usecs [ 9.354015] calling mcp2120_sir_init+0x0/0x39 @ 1 [ 9.359017] initcall mcp2120_sir_init+0x0/0x39 returned 0 after 0 usecs [ 9.365015] calling ma600_sir_init+0x0/0x39 @ 1 [ 9.370017] initcall ma600_sir_init+0x0/0x39 returned 0 after 0 usecs [ 9.376015] calling toim3232_sir_init+0x0/0x52 @ 1 [ 9.381017] initcall toim3232_sir_init+0x0/0x52 returned 0 after 0 usecs [ 9.388015] calling ksdazzle_init+0x0/0x42 @ 1 [ 9.393357] usbcore: registered new interface driver ksdazzle-sir [ 9.399022] initcall ksdazzle_init+0x0/0x42 returned 0 after 5859 usecs [ 9.406015] calling init_netconsole+0x0/0x184 @ 1 [ 9.410065] console [netcon0] enabled [ 9.414014] netconsole: network logging started [ 9.419015] initcall init_netconsole+0x0/0x184 returned 0 after 8789 usecs [ 9.426014] calling niu_init+0x0/0x64 @ 1 [ 9.430518] initcall niu_init+0x0/0x64 returned 0 after 0 usecs [ 9.436015] calling efx_init_module+0x0/0xfd @ 1 [ 9.441014] Solarflare NET driver v2.3 [ 9.448066] initcall efx_init_module+0x0/0xfd returned 0 after 6835 usecs [ 9.454016] calling fusion_init+0x0/0x164 @ 1 [ 9.459014] Fusion MPT base driver 3.04.10 [ 9.463013] Copyright (c) 1999-2008 LSI Corporation [ 9.468060] initcall fusion_init+0x0/0x164 returned 0 after 8789 usecs [ 9.474015] calling mptsas_init+0x0/0x130 @ 1 [ 9.479014] Fusion MPT SAS Host driver 3.04.10 [ 9.484203] initcall mptsas_init+0x0/0x130 returned 0 after 4882 usecs [ 9.490015] calling mptctl_init+0x0/0x141 @ 1 [ 9.495014] Fusion MPT misc device (ioctl) driver 3.04.10 [ 9.501081] mptctl: Registered with Fusion MPT base driver [ 9.506016] mptctl: /dev/mptctl @ (major,minor=10,220) [ 9.511016] initcall mptctl_init+0x0/0x141 returned 0 after 15625 usecs [ 9.518015] calling pcilynx_init+0x0/0x62 @ 1 [ 9.523234] initcall pcilynx_init+0x0/0x62 returned 0 after 976 usecs [ 9.529015] calling ohci1394_init+0x0/0x42 @ 1 [ 9.534628] initcall ohci1394_init+0x0/0x42 returned 0 after 0 usecs [ 9.541016] calling video1394_init_module+0x0/0xfc @ 1 [ 9.546586] video1394: Installed video1394 module [ 9.551016] initcall video1394_init_module+0x0/0xfc returned 0 after 4882 usecs [ 9.558015] calling init_raw1394+0x0/0x11a @ 1 [ 9.563619] ieee1394: raw1394: /dev/raw1394 device initialized [ 9.569896] initcall init_raw1394+0x0/0x11a returned 0 after 5859 usecs [ 9.576016] calling dv1394_init_module+0x0/0xc5 @ 1 [ 9.581851] initcall dv1394_init_module+0x0/0xc5 returned 0 after 0 usecs [ 9.588015] calling ether1394_init_module+0x0/0x96 @ 1 [ 9.594640] initcall ether1394_init_module+0x0/0x96 returned 0 after 976 usecs [ 9.602016] calling uio_init+0x0/0x2d @ 1 [ 9.606015] initcall uio_init+0x0/0x2d returned 0 after 0 usecs [ 9.612015] calling hilscher_init_module+0x0/0x42 @ 1 [ 9.617722] initcall hilscher_init_module+0x0/0x42 returned 0 after 0 usecs [ 9.624016] calling uio_pdrv_init+0x0/0x39 @ 1 [ 9.629594] initcall uio_pdrv_init+0x0/0x39 returned 0 after 0 usecs [ 9.635016] calling uio_pdrv_genirq_init+0x0/0x39 @ 1 [ 9.641467] initcall uio_pdrv_genirq_init+0x0/0x39 returned 0 after 0 usecs [ 9.648016] calling smx_ce_init_module+0x0/0x39 @ 1 [ 9.653761] initcall smx_ce_init_module+0x0/0x39 returned 0 after 0 usecs [ 9.660015] calling aectc_init+0x0/0x42 @ 1 [ 9.665218] initcall aectc_init+0x0/0x42 returned 0 after 976 usecs [ 9.671017] calling butterfly_init+0x0/0x39 @ 1 [ 9.785078] parport0: AVR Butterfly [ 9.788019] initcall butterfly_init+0x0/0x39 returned 0 after 109375 usecs [ 9.795016] calling init_spi_lm70llp+0x0/0x39 @ 1 [ 9.800026] parport0: cannot grant exclusive access for device spi-lm70llp [ 9.807022] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 9.812016] initcall init_spi_lm70llp+0x0/0x39 returned 0 after 11718 usecs [ 9.819015] calling spidev_init+0x0/0xbf @ 1 [ 9.824508] initcall spidev_init+0x0/0xbf returned 0 after 0 usecs [ 9.830017] calling tle62x0_init+0x0/0x39 @ 1 [ 9.835769] initcall tle62x0_init+0x0/0x39 returned 0 after 0 usecs [ 9.842019] calling nonstatic_sysfs_init+0x0/0x39 @ 1 [ 9.847068] initcall nonstatic_sysfs_init+0x0/0x39 returned 0 after 0 usecs [ 9.854015] calling yenta_socket_init+0x0/0x42 @ 1 [ 9.859506] initcall yenta_socket_init+0x0/0x42 returned 0 after 0 usecs [ 9.866015] calling uwb_subsys_init+0x0/0x77 @ 1 [ 9.871298] initcall uwb_subsys_init+0x0/0x77 returned 0 after 976 usecs [ 9.878016] calling hwarc_driver_init+0x0/0x42 @ 1 [ 9.883271] usbcore: registered new interface driver hwa-rc [ 9.888023] initcall hwarc_driver_init+0x0/0x42 returned 0 after 5859 usecs [ 9.895015] calling mon_init+0x0/0x141 @ 1 [ 9.900403] initcall mon_init+0x0/0x141 returned 0 after 0 usecs [ 9.907019] calling ehci_hcd_init+0x0/0x10e @ 1 [ 9.911014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.918015] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 9.924432] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table [ 9.925016] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! [ 9.927021] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 [ 9.929187] initcall ehci_hcd_init+0x0/0x10e returned 0 after 17578 usecs [ 9.936016] calling oxu_module_init+0x0/0x39 @ 1 [ 9.941078] initcall oxu_module_init+0x0/0x39 returned 0 after 976 usecs [ 9.947016] calling isp116x_init+0x0/0x67 @ 1 [ 9.952014] 116x: driver isp116x-hcd, 03 Nov 2005 [ 9.957307] initcall isp116x_init+0x0/0x67 returned 0 after 4882 usecs [ 9.963016] calling ohci_hcd_mod_init+0x0/0x101 @ 1 [ 9.968014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.975014] ohci_hcd: block sizes: ed 80 td 96 [ 9.979643] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table [ 9.980015] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! [ 9.981018] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 [ 9.982261] initcall ohci_hcd_mod_init+0x0/0x101 returned 0 after 13671 usecs [ 9.989071] calling uhci_hcd_init+0x0/0x15a @ 1 [ 9.994144] uhci_hcd: USB Universal Host Controller Interface driver [ 10.002157] initcall uhci_hcd_init+0x0/0x15a returned 0 after 7812 usecs [ 10.008086] calling xhci_hcd_init+0x0/0x52 @ 1 [ 10.013889] initcall xhci_hcd_init+0x0/0x52 returned 0 after 0 usecs [ 10.020074] calling sl811h_init+0x0/0x67 @ 1 [ 10.024018] sl811: driver sl811-hcd, 19 May 2005 [ 10.029688] initcall sl811h_init+0x0/0x67 returned 0 after 4882 usecs [ 10.036016] calling r8a66597_init+0x0/0x67 @ 1 [ 10.040014] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 [ 10.046431] initcall r8a66597_init+0x0/0x67 returned 0 after 5859 usecs [ 10.053016] calling isp1760_init+0x0/0x76 @ 1 [ 10.059304] initcall isp1760_init+0x0/0x76 returned 0 after 1953 usecs [ 10.066016] calling wusbcore_init+0x0/0x9a @ 1 [ 10.070766] initcall wusbcore_init+0x0/0x9a returned 0 after 0 usecs [ 10.077017] calling cbaf_driver_init+0x0/0x42 @ 1 [ 10.082252] usbcore: registered new interface driver wusb-cbaf [ 10.088023] initcall cbaf_driver_init+0x0/0x42 returned 0 after 6835 usecs [ 10.095015] calling acm_init+0x0/0x128 @ 1 [ 10.099534] usbcore: registered new interface driver cdc_acm [ 10.105020] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 10.113016] initcall acm_init+0x0/0x128 returned 0 after 13671 usecs [ 10.120015] calling usblp_init+0x0/0x42 @ 1 [ 10.124728] usbcore: registered new interface driver usblp [ 10.130034] initcall usblp_init+0x0/0x42 returned 0 after 5859 usecs [ 10.136015] calling wdm_init+0x0/0x42 @ 1 [ 10.141104] usbcore: registered new interface driver cdc_wdm [ 10.146022] initcall wdm_init+0x0/0x42 returned 0 after 5859 usecs [ 10.152016] calling usb_usual_init+0x0/0x66 @ 1 [ 10.158215] usbcore: registered new interface driver libusual [ 10.163026] initcall usb_usual_init+0x0/0x66 returned 0 after 6835 usecs [ 10.170016] calling usb_mdc800_init+0x0/0x32e @ 1 [ 10.175851] usbcore: registered new interface driver mdc800 [ 10.181021] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 10.189016] initcall usb_mdc800_init+0x0/0x32e returned 0 after 13671 usecs [ 10.196015] calling microtek_drv_init+0x0/0x42 @ 1 [ 10.201292] usbcore: registered new interface driver microtekX6 [ 10.207023] initcall microtek_drv_init+0x0/0x42 returned 0 after 6835 usecs [ 10.214016] calling adu_init+0x0/0xba @ 1 [ 10.218014] drivers/usb/misc/adutux.c : adu_init : enter [ 10.224136] usbcore: registered new interface driver adutux [ 10.229021] adutux adutux (see www.ontrak.net) v0.0.13 [ 10.234014] adutux is an experimental driver. Use at your own risk [ 10.241014] drivers/usb/misc/adutux.c : adu_init : leave, return value 0 [ 10.247016] initcall adu_init+0x0/0xba returned 0 after 28320 usecs [ 10.254015] calling berry_init+0x0/0x42 @ 1 [ 10.258839] usbcore: registered new interface driver berry_charge [ 10.264023] initcall berry_init+0x0/0x42 returned 0 after 5859 usecs [ 10.271016] calling cypress_init+0x0/0x60 @ 1 [ 10.276081] usbcore: registered new interface driver cypress_cy7c63 [ 10.282023] initcall cypress_init+0x0/0x60 returned 0 after 6835 usecs [ 10.288015] calling emi26_init+0x0/0x42 @ 1 [ 10.293555] usbcore: registered new interface driver emi26 - firmware loader [ 10.300022] initcall emi26_init+0x0/0x42 returned 0 after 6835 usecs [ 10.307018] calling usb_idmouse_init+0x0/0x6c @ 1 [ 10.311014] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver [ 10.318206] usbcore: registered new interface driver idmouse [ 10.323023] initcall usb_idmouse_init+0x0/0x6c returned 0 after 11718 usecs [ 10.330016] calling iowarrior_init+0x0/0x42 @ 1 [ 10.335826] usbcore: registered new interface driver iowarrior [ 10.341023] initcall iowarrior_init+0x0/0x42 returned 0 after 5859 usecs [ 10.348016] calling ld_usb_init+0x0/0x60 @ 1 [ 10.353081] usbcore: registered new interface driver ldusb [ 10.358025] initcall ld_usb_init+0x0/0x60 returned 0 after 5859 usecs [ 10.365016] calling lego_usb_tower_init+0x0/0xaf @ 1 [ 10.370014] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter [ 10.377081] usbcore: registered new interface driver legousbtower [ 10.383021] legousbtower: v0.96:LEGO USB Tower Driver [ 10.388015] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0 [ 10.396016] initcall lego_usb_tower_init+0x0/0xaf returned 0 after 25390 usecs [ 10.403015] calling usb_rio_init+0x0/0x5e @ 1 [ 10.408269] usbcore: registered new interface driver rio500 [ 10.413021] rio500: v1.1:USB Rio 500 driver [ 10.418016] initcall usb_rio_init+0x0/0x5e returned 0 after 10742 usecs [ 10.424015] calling usbtest_init+0x0/0x66 @ 1 [ 10.429455] usbcore: registered new interface driver usbtest [ 10.435023] initcall usbtest_init+0x0/0x66 returned 0 after 5859 usecs [ 10.441016] calling uss720_init+0x0/0x88 @ 1 [ 10.446368] usbcore: registered new interface driver uss720 [ 10.451021] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 10.461014] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 10.468014] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 10.475014] uss720: If you just want to connect to a printer, use usblp instead [ 10.483016] initcall uss720_init+0x0/0x88 returned 0 after 36132 usecs [ 10.489015] calling usb_sisusb_init+0x0/0x47 @ 1 [ 10.494727] usbcore: registered new interface driver sisusb [ 10.500023] initcall usb_sisusb_init+0x0/0x47 returned 0 after 5859 usecs [ 10.507016] calling i8042_init+0x0/0x143 @ 1 [ 10.514615] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.520062] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.525032] initcall i8042_init+0x0/0x143 returned 0 after 13671 usecs [ 10.531017] calling serport_init+0x0/0x5a @ 1 [ 10.536017] initcall serport_init+0x0/0x5a returned 0 after 0 usecs [ 10.542016] calling pcips2_init+0x0/0x42 @ 1 [ 10.547291] initcall pcips2_init+0x0/0x42 returned 0 after 976 usecs [ 10.553017] calling serio_raw_init+0x0/0x42 @ 1 [ 10.558671] initcall serio_raw_init+0x0/0x42 returned 0 after 0 usecs [ 10.565016] calling emu_init+0x0/0x42 @ 1 [ 10.569612] initcall emu_init+0x0/0x42 returned 0 after 0 usecs [ 10.575016] calling ns558_init+0x0/0x60 @ 1 [ 10.588423] initcall ns558_init+0x0/0x60 returned -19 after 8789 usecs [ 10.595016] calling mousedev_init+0x0/0x87 @ 1 [ 10.601211] mice: PS/2 mouse device common for all mice [ 10.606020] initcall mousedev_init+0x0/0x87 returned 0 after 5859 usecs [ 10.613016] calling evdev_init+0x0/0x39 @ 1 [ 10.617925] initcall evdev_init+0x0/0x39 returned 0 after 0 usecs [ 10.624017] calling evbug_init+0x0/0x39 @ 1 [ 10.628022] evbug.c: Connected device: input0 (Macintosh mouse button emulation at unknown) [ 10.636018] initcall evbug_init+0x0/0x39 returned 0 after 7812 usecs [ 10.643016] calling atkbd_init+0x0/0x4e @ 1 [ 10.647689] initcall atkbd_init+0x0/0x4e returned 0 after 0 usecs [ 10.653016] calling lm8323_init+0x0/0x3b @ 1 [ 10.658545] i2c-core: driver [lm8323] registered [ 10.663022] initcall lm8323_init+0x0/0x3b returned 0 after 4882 usecs [ 10.669016] calling nkbd_init+0x0/0x42 @ 1 [ 10.674174] input: AT Translated Set 2 keyboard as /class/input/input1 [ 10.676296] initcall nkbd_init+0x0/0x42 returned 0 after 2929 usecs [ 10.682138] calling skbd_init+0x0/0x42 @ 1 [ 10.687419] evbug.c: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 10.688277] initcall skbd_init+0x0/0x42 returned 0 after 1953 usecs [ 10.695081] calling xtkbd_init+0x0/0x42 @ 1 [ 10.700155] initcall xtkbd_init+0x0/0x42 returned 0 after 976 usecs [ 10.706088] calling a3d_init+0x0/0x42 @ 1 [ 10.711105] initcall a3d_init+0x0/0x42 returned 0 after 976 usecs [ 10.717076] calling cobra_init+0x0/0x42 @ 1 [ 10.721950] initcall cobra_init+0x0/0x42 returned 0 after 0 usecs [ 10.728021] calling gc_init+0x0/0xe8 @ 1 [ 10.732017] initcall gc_init+0x0/0xe8 returned -19 after 0 usecs [ 10.738016] calling gf2k_init+0x0/0x42 @ 1 [ 10.742638] initcall gf2k_init+0x0/0x42 returned 0 after 0 usecs [ 10.748017] calling grip_init+0x0/0x42 @ 1 [ 10.753212] initcall grip_init+0x0/0x42 returned 0 after 976 usecs [ 10.759017] calling grip_init+0x0/0x42 @ 1 [ 10.763964] initcall grip_init+0x0/0x42 returned 0 after 0 usecs [ 10.770018] calling iforce_init+0x0/0x42 @ 1 [ 10.774707] usbcore: registered new interface driver iforce [ 10.780023] initcall iforce_init+0x0/0x42 returned 0 after 5859 usecs [ 10.786016] calling interact_init+0x0/0x42 @ 1 [ 10.791638] initcall interact_init+0x0/0x42 returned 0 after 0 usecs [ 10.798017] calling joydump_init+0x0/0x42 @ 1 [ 10.802817] initcall joydump_init+0x0/0x42 returned 0 after 0 usecs [ 10.809017] calling sw_init+0x0/0x42 @ 1 [ 10.813478] initcall sw_init+0x0/0x42 returned 0 after 0 usecs [ 10.819017] calling spaceball_init+0x0/0x42 @ 1 [ 10.824329] initcall spaceball_init+0x0/0x42 returned 0 after 976 usecs [ 10.830017] calling stinger_init+0x0/0x42 @ 1 [ 10.835610] initcall stinger_init+0x0/0x42 returned 0 after 0 usecs [ 10.842066] calling tmdc_init+0x0/0x42 @ 1 [ 10.846661] initcall tmdc_init+0x0/0x42 returned 0 after 0 usecs [ 10.852077] calling tgfx_init+0x0/0xe7 @ 1 [ 10.857013] initcall tgfx_init+0x0/0xe7 returned -19 after 0 usecs [ 10.863066] calling twidjoy_init+0x0/0x42 @ 1 [ 10.868168] initcall twidjoy_init+0x0/0x42 returned 0 after 976 usecs [ 10.874019] calling usb_xpad_init+0x0/0x5e @ 1 [ 10.879507] usbcore: registered new interface driver xpad [ 10.884021] xpad: X-Box pad driver [ 10.888017] initcall usb_xpad_init+0x0/0x5e returned 0 after 8789 usecs [ 10.894016] calling usb_acecad_init+0x0/0x5e @ 1 [ 10.900068] usbcore: registered new interface driver usb_acecad [ 10.906021] acecad: v3.2:USB Acecad Flair tablet driver [ 10.911017] initcall usb_acecad_init+0x0/0x5e returned 0 after 11718 usecs [ 10.918016] calling aiptek_init+0x0/0x6c @ 1 [ 10.922833] usbcore: registered new interface driver aiptek [ 10.928021] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) [ 10.936015] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen [ 10.943017] initcall aiptek_init+0x0/0x6c returned 0 after 20507 usecs [ 10.950016] calling wacom_init+0x0/0x6a @ 1 [ 10.954891] usbcore: registered new interface driver wacom [ 10.960021] wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver [ 10.967017] initcall wacom_init+0x0/0x6a returned 0 after 12695 usecs [ 10.973016] calling ad7877_init+0x0/0x39 @ 1 [ 10.978432] initcall ad7877_init+0x0/0x39 returned 0 after 0 usecs [ 10.984017] calling ad7879_init+0x0/0x3b @ 1 [ 10.989333] i2c-core: driver [ad7879] registered [ 10.993021] initcall ad7879_init+0x0/0x3b returned 0 after 3906 usecs [ 11.000016] calling ads7846_init+0x0/0x39 @ 1 [ 11.005197] initcall ads7846_init+0x0/0x39 returned 0 after 976 usecs [ 11.011066] calling eeti_ts_init+0x0/0x3b @ 1 [ 11.016548] i2c-core: driver [eeti_ts] registered [ 11.021079] initcall eeti_ts_init+0x0/0x3b returned 0 after 4882 usecs [ 11.027098] calling inexio_init+0x0/0x42 @ 1 [ 11.032684] initcall inexio_init+0x0/0x42 returned 0 after 0 usecs [ 11.038021] calling mtouch_init+0x0/0x42 @ 1 [ 11.043595] initcall mtouch_init+0x0/0x42 returned 0 after 0 usecs [ 11.049017] calling usbtouch_init+0x0/0x42 @ 1 [ 11.054683] usbcore: registered new interface driver usbtouchscreen [ 11.060023] initcall usbtouch_init+0x0/0x42 returned 0 after 5859 usecs [ 11.067016] calling pm_init+0x0/0x42 @ 1 [ 11.071971] initcall pm_init+0x0/0x42 returned 0 after 0 usecs [ 11.077017] calling ati_remote_init+0x0/0x70 @ 1 [ 11.082871] usbcore: registered new interface driver ati_remote [ 11.088021] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control [ 11.094017] initcall ati_remote_init+0x0/0x70 returned 0 after 11718 usecs [ 11.101016] calling ati_remote2_init+0x0/0x70 @ 1 [ 11.106406] usbcore: registered new interface driver ati_remote2 [ 11.112021] ati_remote2: ATI/Philips USB RF remote driver 0.3 [ 11.118017] initcall ati_remote2_init+0x0/0x70 returned 0 after 11718 usecs [ 11.125016] calling cm109_init+0x0/0x69 @ 1 [ 11.129015] cm109: Keymap for Komunikate KIP1000 phone loaded [ 11.135514] usbcore: registered new interface driver cm109 [ 11.141021] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 11.147017] initcall cm109_init+0x0/0x69 returned 0 after 17578 usecs [ 11.154017] calling usb_keyspan_init+0x0/0x60 @ 1 [ 11.159184] usbcore: registered new interface driver keyspan_remote [ 11.165071] initcall usb_keyspan_init+0x0/0x60 returned 0 after 6835 usecs [ 11.172071] calling pcf50633_input_init+0x0/0x39 @ 1 [ 11.177954] initcall pcf50633_input_init+0x0/0x39 returned 0 after 0 usecs [ 11.184075] calling pcspkr_init+0x0/0x39 @ 1 [ 11.189872] input: PC Speaker as /class/input/input2 [ 11.195427] evbug.c: Connected device: input2 (PC Speaker at isa0061/input0) [ 11.202856] initcall pcspkr_init+0x0/0x39 returned 0 after 12695 usecs [ 11.209018] calling twl4030_pwrbutton_init+0x0/0x39 @ 1 [ 11.215130] initcall twl4030_pwrbutton_init+0x0/0x39 returned 0 after 976 usecs [ 11.222018] calling uinput_init+0x0/0x39 @ 1 [ 11.227205] initcall uinput_init+0x0/0x39 returned 0 after 976 usecs [ 11.233067] calling yealink_dev_init+0x0/0x5e @ 1 [ 11.238853] usbcore: registered new interface driver yealink [ 11.244081] yealink: yld-20051230:Yealink phone driver [ 11.249105] initcall yealink_dev_init+0x0/0x5e returned 0 after 10742 usecs [ 11.256066] calling xenkbd_init+0x0/0x6b @ 1 [ 11.261020] initcall xenkbd_init+0x0/0x6b returned -19 after 0 usecs [ 11.267016] calling cmos_init+0x0/0x55 @ 1 [ 11.272477] rtc_cmos: dev (254:0) [ 11.275037] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 11.282081] rtc0: alarms up to one day, 114 bytes nvram [ 11.287918] initcall cmos_init+0x0/0x55 returned 0 after 15625 usecs [ 11.294018] calling ds1286_init+0x0/0x39 @ 1 [ 11.299067] initcall ds1286_init+0x0/0x39 returned 0 after 976 usecs [ 11.305017] calling ds1305_init+0x0/0x39 @ 1 [ 11.310120] initcall ds1305_init+0x0/0x39 returned 0 after 976 usecs [ 11.316017] calling ds1307_init+0x0/0x3b @ 1 [ 11.321250] i2c-core: driver [rtc-ds1307] registered [ 11.326023] initcall ds1307_init+0x0/0x3b returned 0 after 5859 usecs [ 11.332017] calling ds1390_init+0x0/0x39 @ 1 [ 11.337379] initcall ds1390_init+0x0/0x39 returned 0 after 0 usecs [ 11.343018] calling ds1511_rtc_init+0x0/0x39 @ 1 [ 11.348645] initcall ds1511_rtc_init+0x0/0x39 returned 0 after 0 usecs [ 11.355017] calling ds1553_init+0x0/0x39 @ 1 [ 11.359901] initcall ds1553_init+0x0/0x39 returned 0 after 0 usecs [ 11.366017] calling ds1672_init+0x0/0x3b @ 1 [ 11.370801] i2c-core: driver [rtc-ds1672] registered [ 11.375021] initcall ds1672_init+0x0/0x3b returned 0 after 4882 usecs [ 11.382017] calling ds1742_init+0x0/0x39 @ 1 [ 11.386945] initcall ds1742_init+0x0/0x39 returned 0 after 0 usecs [ 11.393021] calling ds3234_init+0x0/0x39 @ 1 [ 11.397859] initcall ds3234_init+0x0/0x39 returned 0 after 0 usecs [ 11.404017] calling isl1208_init+0x0/0x3b @ 1 [ 11.408845] i2c-core: driver [rtc-isl1208] registered [ 11.413021] initcall isl1208_init+0x0/0x3b returned 0 after 4882 usecs [ 11.420017] calling m41t80_rtc_init+0x0/0x3b @ 1 [ 11.425492] i2c-core: driver [rtc-m41t80] registered [ 11.430021] initcall m41t80_rtc_init+0x0/0x3b returned 0 after 4882 usecs [ 11.437017] calling m41t94_init+0x0/0x39 @ 1 [ 11.441971] initcall m41t94_init+0x0/0x39 returned 0 after 0 usecs [ 11.448017] calling m48t35_init+0x0/0x39 @ 1 [ 11.452876] initcall m48t35_init+0x0/0x39 returned 0 after 0 usecs [ 11.459017] calling m48t59_rtc_init+0x0/0x39 @ 1 [ 11.464119] initcall m48t59_rtc_init+0x0/0x39 returned 0 after 976 usecs [ 11.470018] calling max6900_init+0x0/0x3b @ 1 [ 11.475658] i2c-core: driver [rtc-max6900] registered [ 11.480021] initcall max6900_init+0x0/0x3b returned 0 after 4882 usecs [ 11.487017] calling max6902_init+0x0/0x39 @ 1 [ 11.492122] initcall max6902_init+0x0/0x39 returned 0 after 976 usecs [ 11.498018] calling pcf8563_init+0x0/0x3b @ 1 [ 11.503380] i2c-core: driver [rtc-pcf8563] registered [ 11.508021] initcall pcf8563_init+0x0/0x3b returned 0 after 4882 usecs [ 11.514017] calling pcf8583_init+0x0/0x3b @ 1 [ 11.519619] i2c-core: driver [pcf8583] registered [ 11.524058] initcall pcf8583_init+0x0/0x3b returned 0 after 4882 usecs [ 11.531095] calling rs5c348_init+0x0/0x39 @ 1 [ 11.535973] initcall rs5c348_init+0x0/0x39 returned 0 after 0 usecs [ 11.542081] calling rs5c372_init+0x0/0x3b @ 1 [ 11.547119] i2c-core: driver [rtc-rs5c372] registered [ 11.552021] initcall rs5c372_init+0x0/0x3b returned 0 after 5859 usecs [ 11.558017] calling s35390a_rtc_init+0x0/0x3b @ 1 [ 11.563862] i2c-core: driver [rtc-s35390a] registered [ 11.568021] initcall s35390a_rtc_init+0x0/0x3b returned 0 after 4882 usecs [ 11.575017] calling stk17ta8_init+0x0/0x39 @ 1 [ 11.580704] initcall stk17ta8_init+0x0/0x39 returned 0 after 0 usecs [ 11.587017] calling v3020_init+0x0/0x39 @ 1 [ 11.591700] initcall v3020_init+0x0/0x39 returned 0 after 0 usecs [ 11.597017] calling x1205_init+0x0/0x3b @ 1 [ 11.602430] i2c-core: driver [rtc-x1205] registered [ 11.607022] initcall x1205_init+0x0/0x3b returned 0 after 4882 usecs [ 11.613017] calling pcf50633_rtc_init+0x0/0x39 @ 1 [ 11.618917] initcall pcf50633_rtc_init+0x0/0x39 returned 0 after 0 usecs [ 11.625018] calling i2c_dev_init+0x0/0xcb @ 1 [ 11.630015] i2c /dev entries driver [ 11.634273] i2c-core: driver [dev_driver] registered [ 11.639933] i2c-dev: adapter [via_i2c] registered as minor 0 [ 11.645024] initcall i2c_dev_init+0x0/0xcb returned 0 after 14648 usecs [ 11.652021] calling i2c_ali1535_init+0x0/0x42 @ 1 [ 11.657573] initcall i2c_ali1535_init+0x0/0x42 returned 0 after 0 usecs [ 11.664018] calling ali1563_init+0x0/0x42 @ 1 [ 11.669103] initcall ali1563_init+0x0/0x42 returned 0 after 976 usecs [ 11.675018] calling amd756_init+0x0/0x42 @ 1 [ 11.680317] initcall amd756_init+0x0/0x42 returned 0 after 976 usecs [ 11.686018] calling i2c_i801_init+0x0/0x42 @ 1 [ 11.691615] initcall i2c_i801_init+0x0/0x42 returned 0 after 0 usecs [ 11.698018] calling i2c_sch_init+0x0/0x42 @ 1 [ 11.702851] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs [ 11.709018] calling nforce2_init+0x0/0x42 @ 1 [ 11.714214] i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 4c00] registered [ 11.715078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x69 [ 11.718112] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.719082] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x50 [ 11.724030] i2c-adapter i2c-1: Creating eeprom at 0x50 [ 11.725098] i2c 1-0050: uevent [ 11.726142] eeprom 1-0050: probe [ 11.727051] i2c-adapter i2c-1: client [eeprom] registered with bus id 1-0050 [ 11.728017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x51 [ 11.733029] i2c-adapter i2c-1: Creating eeprom at 0x51 [ 11.734110] i2c 1-0051: uevent [ 11.735153] eeprom 1-0051: probe [ 11.736035] i2c-adapter i2c-1: client [eeprom] registered with bus id 1-0051 [ 11.737016] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x52 [ 11.740029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.741020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x53 [ 11.744028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.745020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x54 [ 11.748028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.749017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x55 [ 11.752028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.753017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x56 [ 11.756028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.757017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x57 [ 11.760028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.761411] i2c-dev: adapter [SMBus nForce2 adapter at 4c00] registered as minor 1 [ 11.762020] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c00 [ 11.763250] i2c-adapter i2c-2: adapter [SMBus nForce2 adapter at 4c40] registered [ 11.764064] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x69 [ 11.767029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.768030] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x50 [ 11.771028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.772020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x51 [ 11.775028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.776017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x52 [ 11.779028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.780017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x53 [ 11.783028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.784017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x54 [ 11.787028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.788025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x55 [ 11.791028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.792017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x56 [ 11.795028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.796017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x57 [ 11.799028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.800357] i2c-dev: adapter [SMBus nForce2 adapter at 4c40] registered as minor 2 [ 11.801020] i2c-adapter i2c-2: nForce2 SMBus adapter at 0x4c40 [ 11.802194] initcall nforce2_init+0x0/0x42 returned 0 after 86914 usecs [ 11.809076] calling i2c_piix4_init+0x0/0x42 @ 1 [ 11.814513] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs [ 11.820077] calling i2c_sis630_init+0x0/0x42 @ 1 [ 11.826142] initcall i2c_sis630_init+0x0/0x42 returned 0 after 976 usecs [ 11.832068] calling i2c_sis96x_init+0x0/0x42 @ 1 [ 11.838123] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 976 usecs [ 11.844075] calling i2c_vt586b_init+0x0/0x42 @ 1 [ 11.850111] initcall i2c_vt586b_init+0x0/0x42 returned 0 after 976 usecs [ 11.856077] calling ocores_i2c_init+0x0/0x39 @ 1 [ 11.861982] initcall ocores_i2c_init+0x0/0x39 returned 0 after 976 usecs [ 11.868018] calling i2c_parport_init+0x0/0x6b @ 1 [ 11.873015] i2c-parport: adapter type unspecified [ 11.878017] initcall i2c_parport_init+0x0/0x6b returned -19 after 4882 usecs [ 11.885017] calling taos_init+0x0/0x42 @ 1 [ 11.889836] initcall taos_init+0x0/0x42 returned 0 after 0 usecs [ 11.895018] calling usb_i2c_tiny_usb_init+0x0/0x42 @ 1 [ 11.901447] usbcore: registered new interface driver i2c-tiny-usb [ 11.907025] initcall usb_i2c_tiny_usb_init+0x0/0x42 returned 0 after 5859 usecs [ 11.914019] calling i2c_voodoo3_init+0x0/0x42 @ 1 [ 11.920140] initcall i2c_voodoo3_init+0x0/0x42 returned 0 after 976 usecs [ 11.926018] calling i2c_pca_pf_init+0x0/0x39 @ 1 [ 11.932069] initcall i2c_pca_pf_init+0x0/0x39 returned 0 after 976 usecs [ 11.938018] calling pca9539_init+0x0/0x3b @ 1 [ 11.943588] i2c-core: driver [pca9539] registered [ 11.948043] initcall pca9539_init+0x0/0x3b returned 0 after 4882 usecs [ 11.954017] calling pcf8574_init+0x0/0x3b @ 1 [ 11.959661] i2c-core: driver [pcf8574] registered [ 11.964038] initcall pcf8574_init+0x0/0x3b returned 0 after 4882 usecs [ 11.970017] calling tsl2550_init+0x0/0x3b @ 1 [ 11.975721] i2c-core: driver [tsl2550] registered [ 11.980023] initcall tsl2550_init+0x0/0x3b returned 0 after 4882 usecs [ 11.986018] calling w1_init+0x0/0xcd @ 1 [ 11.991016] Driver for 1-wire Dallas network protocol. [ 11.997183] initcall w1_init+0x0/0xcd returned 0 after 5859 usecs [ 12.003018] calling matrox_w1_init+0x0/0x42 @ 1 [ 12.008306] initcall matrox_w1_init+0x0/0x42 returned 0 after 976 usecs [ 12.014018] calling sensors_ds2482_init+0x0/0x3b @ 1 [ 12.020346] i2c-core: driver [ds2482] registered [ 12.024040] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 4882 usecs [ 12.032017] calling w1_f2d_init+0x0/0x39 @ 1 [ 12.036069] initcall w1_f2d_init+0x0/0x39 returned 0 after 0 usecs [ 12.042018] calling w1_ds2760_init+0x0/0x51 @ 1 [ 12.047016] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 12.056020] initcall w1_ds2760_init+0x0/0x51 returned 0 after 8789 usecs [ 12.062017] calling w1_bq27000_init+0x0/0x49 @ 1 [ 12.067020] initcall w1_bq27000_init+0x0/0x49 returned 0 after 0 usecs [ 12.074017] calling ds2760_battery_init+0x0/0x39 @ 1 [ 12.079568] initcall ds2760_battery_init+0x0/0x39 returned 0 after 0 usecs [ 12.086018] calling ds2782_init+0x0/0x3b @ 1 [ 12.091183] i2c-core: driver [ds2782-battery] registered [ 12.096024] initcall ds2782_init+0x0/0x3b returned 0 after 5859 usecs [ 12.102018] calling bq27x00_battery_init+0x0/0x57 @ 1 [ 12.108443] i2c-core: driver [bq27200-battery] registered [ 12.113024] initcall bq27x00_battery_init+0x0/0x57 returned 0 after 4882 usecs [ 12.121017] calling max17040_init+0x0/0x3b @ 1 [ 12.125972] i2c-core: driver [max17040] registered [ 12.130024] initcall max17040_init+0x0/0x3b returned 0 after 4882 usecs [ 12.137017] calling pcf50633_mbc_init+0x0/0x39 @ 1 [ 12.142649] initcall pcf50633_mbc_init+0x0/0x39 returned 0 after 0 usecs [ 12.149018] calling asb100_init+0x0/0x3b @ 1 [ 12.154132] i2c-core: driver [asb100] registered [ 12.158029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.167031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.172028] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.181029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.186025] initcall asb100_init+0x0/0x3b returned 0 after 32226 usecs [ 12.193019] calling sensors_w83627hf_init+0x0/0x9e @ 1 [ 12.198035] initcall sensors_w83627hf_init+0x0/0x9e returned -19 after 0 usecs [ 12.205018] calling sensors_w83792d_init+0x0/0x3b @ 1 [ 12.211475] i2c-core: driver [w83792d] registered [ 12.216028] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.225029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.230018] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.239029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.244018] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.253029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.258019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.267029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.272025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.281029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.286018] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.295029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.300019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.309029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.314019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.323029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.328025] initcall sensors_w83792d_init+0x0/0x3b returned 0 after 114257 usecs [ 12.336019] calling sensors_w83793_init+0x0/0x3b @ 1 [ 12.341604] i2c-core: driver [w83793] registered [ 12.346078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.355079] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.361075] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.369029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.374019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.383029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.388019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.397029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.402025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.411029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.416019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.425029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.430020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.439029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.444019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.453029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.458025] initcall sensors_w83793_init+0x0/0x3b returned 0 after 114257 usecs [ 12.466019] calling sensors_w83781d_init+0x0/0x3b @ 1 [ 12.471790] i2c-core: driver [w83781d] registered [ 12.476028] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x28 [ 12.485030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.490019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 12.499029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.504019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 12.513029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.518019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 12.527029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.532019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.541029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.546019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.555029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.560019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.569029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.574019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.583029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.588025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x28 [ 12.597029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.602019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 12.611029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.616019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 12.625029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.630019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 12.639029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.644019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.653029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.658019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.667029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.672019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.681029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.686020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.695029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.700025] initcall sensors_w83781d_init+0x0/0x3b returned 0 after 223632 usecs [ 12.708030] calling sensors_w83791d_init+0x0/0x3b @ 1 [ 12.713866] i2c-core: driver [w83791d] registered [ 12.718029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.727030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.732019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.741029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.746019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.755029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.760019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.769029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.774025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.783029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.788019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.797029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.802019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.811029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.816019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.825029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.830026] initcall sensors_w83791d_init+0x0/0x3b returned 0 after 114257 usecs [ 12.838019] calling abituguru3_init+0x0/0x185 @ 1 [ 12.843020] initcall abituguru3_init+0x0/0x185 returned -19 after 0 usecs [ 12.849019] calling ad7414_init+0x0/0x3b @ 1 [ 12.854665] i2c-core: driver [ad7414] registered [ 12.859024] initcall ad7414_init+0x0/0x3b returned 0 after 4882 usecs [ 12.865018] calling init_adcxx+0x0/0xa1 @ 1 [ 12.871169] initcall init_adcxx+0x0/0xa1 returned 0 after 976 usecs [ 12.877019] calling sensors_adm1021_init+0x0/0x3b @ 1 [ 12.883153] i2c-core: driver [adm1021] registered [ 12.887217] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x18 [ 12.897030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.902023] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x19 [ 12.911030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.916019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x1a [ 12.925029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.930019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 12.939029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.944021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 12.953029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.958019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 12.967029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.972019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4c [ 12.981029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.986019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4d [ 12.995029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.000019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4e [ 13.009030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.014026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x18 [ 13.023029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.028019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x19 [ 13.037029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.042019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x1a [ 13.051029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.056019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 13.065029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.070019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 13.079029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.084019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 13.093029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.098019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c [ 13.107029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.112019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4d [ 13.121029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.126019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4e [ 13.135029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.140026] initcall sensors_adm1021_init+0x0/0x3b returned 0 after 251953 usecs [ 13.148019] calling sm_adm1026_init+0x0/0x3b @ 1 [ 13.153425] i2c-core: driver [adm1026] registered [ 13.158029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.167030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.172019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.181030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.186019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.195029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.200027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.209030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.214019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 13.223029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.228019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.237030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.242026] initcall sm_adm1026_init+0x0/0x3b returned 0 after 86914 usecs [ 13.249019] calling sensors_adm1029_init+0x0/0x3b @ 1 [ 13.255319] i2c-core: driver [adm1029] registered [ 13.260029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x28 [ 13.268030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.273019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 13.282030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.287019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 13.296030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.301019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 13.310030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.315019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.324030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.329019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.338030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.343019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.352030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.357019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 13.366030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.371026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x28 [ 13.380030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.385019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 13.394030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.399019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 13.408030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.413019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 13.422030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.427019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.436030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.441020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 13.450030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.455020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.464030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.469020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 13.478030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.483026] initcall sensors_adm1029_init+0x0/0x3b returned 0 after 223632 usecs [ 13.491020] calling sensors_adm9240_init+0x0/0x3b @ 1 [ 13.496853] i2c-core: driver [adm9240] registered [ 13.501029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.510030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.515020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.524030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.529020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.538030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.543020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 13.552030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.557026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.566030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.571020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 13.580030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.585020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.594030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.599020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 13.608030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.613026] initcall sensors_adm9240_init+0x0/0x3b returned 0 after 114257 usecs [ 13.621020] calling sensors_ads7828_init+0x0/0x78 @ 1 [ 13.626851] i2c-core: driver [ads7828] registered [ 13.631029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x48 [ 13.640030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.645020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x49 [ 13.654030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.659020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4a [ 13.668030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.673020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4b [ 13.682030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.687026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x48 [ 13.696030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.701029] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x49 [ 13.710030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.715020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a [ 13.724030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.729020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b [ 13.738030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.743026] initcall sensors_ads7828_init+0x0/0x78 returned 0 after 114257 usecs [ 13.751020] calling adt7470_init+0x0/0x3b @ 1 [ 13.756166] i2c-core: driver [adt7470] registered [ 13.760030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.769030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.774020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.783030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.788020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 13.797030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.802026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.811031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.816020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.825030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.830020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 13.839030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.844026] initcall adt7470_init+0x0/0x3b returned 0 after 86914 usecs [ 13.851020] calling atxp1_init+0x0/0x3b @ 1 [ 13.856185] i2c-core: driver [atxp1] registered [ 13.860078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x37 [ 13.869080] i2c-adapter i2c-1: Transaction failed (0x10)!
1,088 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Quoted 94 lines · Gautham R Shenoy
Quoted 84 lines · Ingo Molnar
[ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.010000] ... MAX_LOCK_DEPTH: 48 [ 0.010000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.010000] ... CLASSHASH_SIZE: 4096 [ 0.010000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.010000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.010000] ... CHAINHASH_SIZE: 16384 [ 0.010000] memory used by lock dependency info: 5823 kB [ 0.010000] per task-struct memory footprint: 1920 bytes [ 0.010000] ------------------------ [ 0.010000] | Locking API testsuite: [ 0.010000] ---------------------------------------------------------------------------- [ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.010000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.010000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] recursive read-lock: | ok | |failed| [ 0.010000] recursive read-lock #2: | ok | |failed| [ 0.010000] mixed read-write-lock: |failed| |failed| [ 0.010000] mixed write-read-lock: |failed| |failed| [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.010000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.010000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.010000] hard-irq read-recursion/123: ok | [ 0.010000] soft-irq read-recursion/123: ok | [ 0.010000] hard-irq read-recursion/132: ok | [ 0.010000] soft-irq read-recursion/132: ok | [ 0.010000] hard-irq read-recursion/213: ok | [ 0.010000] soft-irq read-recursion/213: ok | [ 0.010000] hard-irq read-recursion/231: ok |Quoted 8 lines
[ 0.010000] soft-irq read-recursion/231: ok | [ 0.010000] hard-irq read-recursion/312: ok | [ 0.010000] soft-irq read-recursion/312: ok | [ 0.010000] hard-irq read-recursion/321: ok | [ 0.010000] soft-irq read-recursion/321: ok | [ 0.010000] -------------------------------------------------------- [ 0.010000] 133 out of 218 testcases failed, as expected. | [ 0.010000] ----------------------------------------------------
Quoted 8 lines
Hmm.. I tried to reproduce this on a similar 2 CPU machine running linux-2.6.31-rc5-tip. However, I couldn't reproduce this
WARN_ON.That aside, in my case, all the 218 lockdep test cases passed, while this bootlog shows quite a few failures.
So, wondering if I am testing the right kernel version.Appending the patch, bootup log and the config.
I like this patch, one small comment below.
Thanx, Paul
Quoted 25 lines
/*************** Patch ******************************/
rcu: Check if the cpu has been initialized before handling callbacks
From: Gautham R Shenoy <[email protected]>
Signed-off-by Gautham R Shenoy <[email protected]>--- kernel/rcutree.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)kernel/rcutree.c +2
-0@@ -1137,6 +1137,8 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) {unsigned long flags; +WARN_ON_ONCE (rdp->beenonline ==0 ); +/* * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs.
kernel/rcutree.c rcu_init_percpu_data(int cpu, struct rcu_state *rsp) · line 1356
Quoted 4 lines
kernel/rcutree.c +1
-0@@ -1351,6 +1353,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp)struct rcu_data *rdp = rsp->rda[cpu];struct rcu_node *rnp =rcu_get_root (rsp); +printk (KERN_INFO "Initializing RCU for cpu %d\n" , cpu);
Suggest:
printk(KERN_INFO "Initializing RCU for cpu %d, structure %p\n", cpu, rsp);
Just to avoid people being confused by RCU initializing twice per CPU. Or three times with the new preemptable RCU. ;-)
Quoted 495 lines
kernel/rcutree.c +1
-0+/* Set up local state, ensuring consistent view of global state. */ spin_lock_irqsave (&rnp->lock, flags); lastcomp = rsp->completed;/*************** Boot Log ******************************/
root (hd0,0)
Filesystem type is ext2fs, partition type0x83
kernel/boot/vmlinuz-autobenchconsole=tty0 console=ttyS0,9600autobench_args:
root=/dev/sda2 ABAT:1249362544
[Linux-bzImage, setup=0x3000, size=0x334830]
initrd/boot/initrd-autobench.img
[Linux-initrd @0x37de8000,0x2077cbbytes]
boot
Linux version 2.6.31-rc5-autokern1-tip (root@elm3b165) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Tue Aug 4 05:08:45 UTC 2009 Command line: console=tty0 console=ttyS0,9600autobench_args: root=/dev/sda2 ABAT:1249362544
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -000000000009ac00(usable)
BIOS-e820:000000000009ac00-00000000000a0000(reserved)
BIOS-e820:00000000000d4000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -00000000dff70000(usable)
BIOS-e820:00000000dff70000-00000000dff7b000(ACPI data)
BIOS-e820:00000000dff7b000-00000000dff80000(ACPI NVS)
BIOS-e820:00000000dff80000-00000000e0000000(reserved)
BIOS-e820:00000000fec00000-00000000fec00400(reserved)
BIOS-e820:00000000fee00000-00000000fee01000(reserved)
BIOS-e820:00000000fff80000- 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000400000000 (usable)
DMI 2.3 present.last_pfn=0x400000max_arch_pfn=0x400000000last_pfn=0xdff70max_arch_pfn=0x400000000init_memory_mapping: 0000000000000000-00000000dff70000init_memory_mapping: 0000000100000000-0000000400000000
RAMDISK:37de8000-37fef7cb
ACPI: RSDP00000000000f756000024 (v02 PTLTD )
ACPI: XSDT00000000dff78a5b0004C (v01 PTLTD XSDT 06040000 LTP 00000000)
ACPI: FACP00000000dff7ac02000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240)
ACPI: DSDT00000000dff78aa7020E7 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E)
ACPI: FACS00000000dff7bfc000040
ACPI: SSDT00000000dff7acf60020C (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: HPET00000000dff7af0200038 (v01 AMD HAMMER 06040000 PTEC 00000000)
ACPI: APIC00000000dff7af3a00076 (v01 PTLTD APIC 06040000 LTP 00000000)
ACPI: SPCR00000000dff7afb000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
Scanning NUMA topology in Northbridge 24
Number of nodes 2
Node 0 MemBase 0000000000000000 Limit 0000000200000000
Node 1 MemBase 0000000200000000 Limit 0000000400000000
Using node hash shift of 33
found SMP MP-table at [ffff8800000f75e0] f75e0
Bootmem setup node 0 0000000000000000-0000000200000000
NODE_DATA[0000000000001000 -0000000000005fff]
bootmap [0000000000018000 -0000000000057fff] pages 40
(8 early reservations) ==> bootmem [0000000000 - 0200000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 -00022fbea8] TEXT DATA BSS ==> [0001000000 -00022fbea8]
#3 [0037de8000-0037fef7cb] RAMDISK ==> [0037de8000-0037fef7cb]
#4 [000009ac00- 0000100000] BIOS reserved ==> [000009ac00- 0000100000]
#5 [00022fc000-00022fc108] BRK ==> [00022fc000-00022fc108]
#6 [0000008000 -000000c000] PGTABLE ==> [0000008000 -000000c000]
#7 [000000c000- 0000018000] PGTABLE ==> [000000c000- 0000018000]
Bootmem setup node 1 0000000200000000-0000000400000000
NODE_DATA[0000000200000000 -0000000200004fff]
bootmap [0000000200005000 -0000000200044fff] pages 40
(8 early reservations) ==> bootmem [0200000000 - 0400000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 -00022fbea8] TEXT DATA BSS
#3 [0037de8000-0037fef7cb] RAMDISK
#4 [000009ac00- 0000100000] BIOS reserved
#5 [00022fc000-00022fc108] BRK
#6 [0000008000 -000000c000] PGTABLE
#7 [000000c000- 0000018000] PGTABLE
found SMP MP-table at [ffff8800000f75e0] f75e0
Zone PFN ranges:DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00400000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009a 0: 0x00000100 -> 0x000dff70 0: 0x00100000 -> 0x00200000 1: 0x00200000 -> 0x00400000Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port:0x8008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI:LAPIC_NMI(acpi_id[0x00] high edge lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]:apic_id2, version 17, address0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xe8000000] gsi_base[24])
IOAPIC[1]:apic_id3, version 17, address0xe8000000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xe8001000] gsi_base[28])
IOAPIC[2]:apic_id4, version 17, address0xe8001000, GSI 28-31
ACPI:INT_SRC_OVR(bus 0bus_irq0global_irq2 high edge)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id:0x102282a0base:0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting ate0000000(gap: e0000000:1ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:2
PERCPU: Remapped atffffc90000000000with large pages, static data 1914656 bytes
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3956370
Policy zone: Normal
Kernel command line: console=tty0 console=ttyS0,9600autobench_args: root=/dev/sda2 ABAT:1249362544 PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Memory: 15746208k/16777216k available (4270k kernel code, 525272k absent, 505736k reserved, 3005k data, 2396k init) Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
Initializing RCU for cpu 0
Initializing RCU for cpu 0
NR_IRQS:1280
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2392.251 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok |-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.50 BogoMIPS (lpj=9569004) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
mce: CPU supports 5 MCE banks
Performance Counters: AMD PMU driver.... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000fACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Opteron(tm) Processor 250 stepping 0a
Initializing RCU for cpu 1
Initializing RCU for cpu 1
lockdep: fixing up alternatives.
Booting processor 1 APIC0x1ip0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4785.02 BogoMIPS (lpj=9570044)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x1 -> Node 1
mce: CPU supports 5 MCE banks
CPU1: AMD Opteron(tm) Processor 250 stepping 0a
Brought up 2 CPUs
Total of 2 processors activated (9569.52 BogoMIPS).
NET: Registered protocol family 16
TOM:00000000e0000000aka 3584M
TOM2: 0000000400000000 aka 16384M
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: PME# supported from D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
pci 0000:03:03.0: PME# disabled
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:02:02.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe0000-0xfffff) overlaps 0000:02:02.0 BAR 6 (0x0-0xfffff), disabling pnp 00:06: mem resource (0xc0000-0xc7fff) overlaps 0000:02:02.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x100000-0xdfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x1100-0x117f has been reserved
system 00:06: ioport range 0x1180-0x11ff has been reserved
system 00:06: ioport range 0x300-0x307 has been reserved
system 00:06: ioport range 0x421-0x42f has been reserved
system 00:06: ioport range 0xca2-0xca3 has been reserved
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01pci 0000:00:06.0: IO window: 0x2000-0x2fff pci 0000:00:06.0: MEM window: 0xe8100000-0xe81fffff pci 0000:00:06.0: PREFETCH window: 0xe0000000-0xe00fffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0x3000-0x3fff pci 0000:00:0a.0: MEM window: 0xe8200000-0xe82fffff pci 0000:00:0a.0: PREFETCH window: 0xe0100000-0xe01fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0b.0: IO window: 0x4000-0x4fff pci 0000:00:0b.0: MEM window: 0xe8300000-0xe83fffff pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffffNET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2077k freed
HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 [email protected]).
msgmni has been set to 30758
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
boot interrupts on PCI device 0x1022:0x746b already disabled
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor LNXCPU:00: registered ascooling_device0
processor LNXCPU:01: registered ascooling_device1
Real Time Clock Driver v1.12b
AMD768 RNG detected
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O0x3f8(irq = 4) is a 16550A
Platform driver 'serial8250' needs updating - please usedev_pm_ops00:07: ttyS0 at I/O0x3f8(irq = 4) is a 16550A
Platform driver 'floppy' needs updating - please usedev_pm_ops
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:07.1: UDMA133 controller
amd74xx 0000:00:07.1: IDE controller (0x1022:0x7469 rev0x03) amd74xx 0000:00:07.1: not 100% native mode: will probe irqs lateride0: BM-DMA at 0x1020-0x1027 ide1: BM-DMA at 0x1028-0x102fhdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20sata_sil0000:01:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi0 :sata_sil
scsi1 :sata_sil
ata1: SATA max UDMA/100 mmio m512@0xe8102000 tf0xe8102080irq 17
ata2: SATA max UDMA/100 mmio m512@0xe8102000 tf0xe81020c0irq 17
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-6: ST380013AS, 3.25, max UDMA/133
ata1.00: 156312576 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.25 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA link down (SStatus 0 SControl 310)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:03:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
e1000: 0000:03:03.0:e1000_probe: (PCI:66MHz:64-bit) 00:02:b3:9b:20:ef
e1000: eth0:e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.99 (April 20, 2009)
tg3 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
tg3 0000:02:01.0: PME# disabled
eth1: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0d:60:14:bf:64
eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
tg3 0000:02:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
tg3 0000:02:01.1: PME# disabled
eth2: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0d:60:14:bf:65
eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
mptspi 0000:02:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 B2: Capabilities={Initiator}
scsi2 : ioc0: LSI53C1030 B2, FwRev=01032316h, Ports=1, MaxQ=222, IRQ=26
Fusion MPT SAS Host driver 3.04.10
ieee1394: raw1394:/dev/raw1394device initializedehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci_hcd0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19ohci_hcd0000:01:00.0: OHCI Host Controllerohci_hcd0000:01:00.0: new USB bus registered, assigned bus number 1ohci_hcd0000:01:00.0: irq 19, io mem0xe8100000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detectedohci_hcd0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19ohci_hcd0000:01:00.1: OHCI Host Controllerohci_hcd0000:01:00.1: new USB bus registered, assigned bus number 2ohci_hcd0000:01:00.1: irq 19, io mem0xe8101000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detecteduhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
Platform driver 'i8042' needs updating - please usedev_pm_ops
usb 1-1: new full speed USB device usingohci_hcdand address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driverNET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 2 AMD Opteron(tm) Processor 250 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc usb 1-1: configuration #1 chosen from 1 choice input: IBM PPC I/F as /devices/pci0000:00/0000:00:06.0/0000:01:00.0/usb1/1-1/1-1:1.0/input/input2 generic-usb 0003:04B3:4001.0001: input: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:01:00.0-1/input0 input: IBM PPC I/F as /devices/pci0000:00/0000:00:06.0/0000:01:00.0/usb1/1-1/1-1:1.1/input/input3 generic-usb 0003:04B3:4001.0002: input: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:01:00.0-1/input1 powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0xe powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0xe Freeing unused kernel memory: 2396k freed Begin: Loading essential drivers... ...Done.
Begin: Running /scripts/init-premount ... ata_id[1419]: main: unable to open '/dev/.tmp-0-0' ata_id[1461]: main: unable to open '/dev/.tmp-0-0' Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ... Done.
Begin: Waiting for root file system... ...Signature · 2 lines
Thanks and Regards gautham
Quoted 6 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar
i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?
Quoted 6 lines
It does, thank you! This problem really is happening during boot.
Quoted 2 lines
Let me know if you still would like me to run your diagnostic patch too.
Now that you mention it, you should probably let me test it a bit first.
And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).
Gautham, have you been able to reproduce on your machines? Still cannot here.
Thanx, Paul
------------------------------------------------------------------------
Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)
Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:
WARN_ON_ONCE(!rcu_cpu_notified());
---
include/linux/cpu.h | 3 +++ include/linux/rcupdate.h | 1 + kernel/cpu.c | 5 +++++ kernel/notifier.c | 23 +++++++++++++++++++++++ kernel/rcupdate.c | 9 ++++++++- kernel/rcutree.c | 1 + 6 files changed, 41 insertions(+), 1 deletion(-)
include/linux/cpu.h +3 -0
@@ -51,6 +51,9 @@ struct notifier_block;#ifdef CONFIG_HOTPLUG_CPU extern int register_cpu_notifier (struct notifier_block *nb);extern void unregister_cpu_notifier (struct notifier_block *nb); +extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)); +extern int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *));#else #ifndef MODULE
include/linux/rcupdate.h +1 -0
@@ -65,6 +65,7 @@ extern void rcu_init(void);extern void rcu_scheduler_starting (void );extern int rcu_needs_cpu (int cpu);extern int rcu_scheduler_active; +extern int rcu_cpu_notified (void );#if defined(CONFIG_TREE_RCU )#include <linux/rcutree.h>
kernel/cpu.c +5 -0
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)return ret; } +int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return raw_notifier_chain_is_registered (&cpu_chain, fn); +} +#ifdef CONFIG_HOTPLUG_CPU EXPORT_SYMBOL (register_cpu_notifier);
kernel/notifier.c +23 -0
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,return -ENOENT ; } +static int notifier_chain_is_registered (struct notifier_block *nl, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +rcu_read_lock (); +/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */ +while (nl !=NULL ) { +/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */ +if (rcu_dereference (nl)->notifier_call == fn) { +rcu_read_unlock (); +return 1 ; + } + nl = (rcu_dereference (nl)->next); + } +rcu_read_unlock (); +return 0 ; +} + +int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return notifier_chain_is_registered (nh->head, fn); +} +/** * notifier_call_chain - Informs the registered notifiers about an event. * @nl: Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)extern int rcu_cpu_notify (struct notifier_block *self,unsigned long action,void *hcpu); -static int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self, +int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self,unsigned long action,void *hcpu) {rcu_cpu_notify (self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,return NOTIFY_OK ; } +int rcu_cpu_notified (void ) +{ +return cpu_notified (rcu_barrier_cpu_hotplug); +} +void __init rcu_init (void ) {int i;__rcu_init (); +WARN_ON_ONCE (!rcu_cpu_notified ());/* this one expected to trigger. */ hotcpu_notifier (rcu_barrier_cpu_hotplug,0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)unsigned long flags;WARN_ON_ONCE (rdp->beenonline ==0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * If an RCU GP has gone long enough, go check for dyntick
Quoted 12 lines · Paul E. McKenney
Quoted 11 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar
i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?
It does, thank you! This problem really is happening during boot.
Quoted 2 lines
Let me know if you still would like me to run your diagnostic patch too.
Quoted 7 lines
Quoted 1 line
Now that you mention it, you should probably let me test it a bit first.
And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).
Gautham, have you been able to reproduce on your machines? Still cannot here.
I tried on a couple of machines yesterday, but I still couldn't reproduce it with Ingo's config.
Quoted 150 lines
Thanx, Paul
------------------------------------------------------------------------
Create an
rcu_cpu_notified()API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in threeWARN_ON_ONCE()calls, the first of which should trigger, and the second two of which should not -- but I suspect that theWARN_ON_ONCE()located in__rcu_process_callbacks()will in fact trigger on the machine suffering from this bug. ;-)Any code path that executes after
rcu_init()should have RCU CPU-hotplug notifiers registered, so any triggering of the followingWARN_ON_ONCE()afterrcu_init()is a bug:WARN_ON_ONCE(!rcu_cpu_notified());Signed-off-by Paul E. McKenney <[email protected]>---
include/linux/cpu.h | 3 +++ include/linux/rcupdate.h | 1 + kernel/cpu.c | 5 +++++ kernel/notifier.c | 23 +++++++++++++++++++++++ kernel/rcupdate.c | 9 ++++++++- kernel/rcutree.c | 1 + 6 files changed, 41 insertions(+), 1 deletion(-)include/linux/cpu.h +3
-0@@ -51,6 +51,9 @@ struct notifier_block;#ifdef CONFIG_HOTPLUG_CPU extern int register_cpu_notifier (struct notifier_block *nb);extern void unregister_cpu_notifier (struct notifier_block *nb); +extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)); +extern int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *));#else #ifndef MODULE include/linux/rcupdate.h +1
-0@@ -65,6 +65,7 @@ extern void rcu_init(void);extern void rcu_scheduler_starting (void );extern int rcu_needs_cpu (int cpu);extern int rcu_scheduler_active; +extern int rcu_cpu_notified (void );#if defined(CONFIG_TREE_RCU )#include <linux/rcutree.h> kernel/cpu.c +5
-0@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)return ret; } +int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return raw_notifier_chain_is_registered (&cpu_chain, fn); +} +#ifdef CONFIG_HOTPLUG_CPU EXPORT_SYMBOL (register_cpu_notifier);kernel/notifier.c +23
-0@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,return -ENOENT ; } +static int notifier_chain_is_registered (struct notifier_block *nl, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +rcu_read_lock (); +/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */ +while (nl !=NULL ) { +/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */ +if (rcu_dereference (nl)->notifier_call == fn) { +rcu_read_unlock (); +return 1 ; + } + nl = (rcu_dereference (nl)->next); + } +rcu_read_unlock (); +return 0 ; +} + +int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return notifier_chain_is_registered (nh->head, fn); +} +/** * notifier_call_chain - Informs the registered notifiers about an event. * @nl: Pointer to head of the blocking notifier chain kernel/rcupdate.c +8
-1@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)extern int rcu_cpu_notify (struct notifier_block *self,unsigned long action,void *hcpu); -static int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self, +int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self,unsigned long action,void *hcpu) {rcu_cpu_notify (self, action, hcpu);@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,return NOTIFY_OK ; } +int rcu_cpu_notified (void ) +{ +return cpu_notified (rcu_barrier_cpu_hotplug); +} +void __init rcu_init (void ) {int i;__rcu_init (); +WARN_ON_ONCE (!rcu_cpu_notified ());/* this one expected to trigger. */ hotcpu_notifier (rcu_barrier_cpu_hotplug,0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * We don't need protection against CPU-hotplug here because kernel/rcutree.c +1
-0@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)unsigned long flags;WARN_ON_ONCE (rdp->beenonline ==0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * If an RCU GP has gone long enough, go check for dyntick
Signature · 2 lines
Thanks and Regards gautham
Quoted 15 lines · Gautham R Shenoy
Quoted 14 lines · Paul E. McKenney
Quoted 12 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar
i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?
It does, thank you! This problem really is happening during boot.
Quoted 2 lines
Let me know if you still would like me to run your diagnostic patch too.
Now that you mention it, you should probably let me test it a bit first.
Quoted 8 lines
Quoted 5 lines
And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).
Gautham, have you been able to reproduce on your machines? Still cannot here.
I tried on a couple of machines yesterday, but I still couldn't reproduce it with Ingo's config.
Paul, should i try your latest diagnostic patch in -tip testing, to see whether it triggers any new warning?
Ingo
Quoted 21 lines · Ingo Molnar
Quoted 18 lines · Gautham R Shenoy
Quoted 17 lines · Paul E. McKenney
Quoted 6 lines · Paul E. McKenney
Quoted 4 lines · Ingo Molnar
i've attached the full serial bootlog with the warning in it. This should address your question about what the order of initialization is, right?
Quoted 6 lines
It does, thank you! This problem really is happening during boot.
Quoted 2 lines
Let me know if you still would like me to run your diagnostic patch too.
Now that you mention it, you should probably let me test it a bit first.
And here is a tested and debugged version. Diagnostic only, not for inclusion, based on tip/core/rcu as of today (August 5th).
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Gautham, have you been able to reproduce on your machines? Still cannot here.
I tried on a couple of machines yesterday, but I still couldn't reproduce it with Ingo's config.
Paul, should i try your latest diagnostic patch in -tip testing, to see whether it triggers any new warning?
Could you please?
Thanx, Paul
[tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race
In reply to Paul E. McKenneyCommit-ID: 0d84abdae6740ee5290a7a523ee35916f65e16ec Gitweb: http://git.kernel.org/tip/0d84abdae6740ee5290a7a523ee35916f65e16ec Author: Paul E. McKenney <[email protected]> AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sat, 8 Aug 2009 16:51:08 +0200
rcu: Add second diagnostic check for a possible CPU-hotplug race
Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)
Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:
WARN_ON_ONCE(!rcu_cpu_notified());
LKML-Reference: <[email protected]>
--- include/linux/cpu.h | 3 +++ include/linux/rcupdate.h | 1 + kernel/cpu.c | 5 +++++ kernel/notifier.c | 23 +++++++++++++++++++++++ kernel/rcupdate.c | 9 ++++++++- kernel/rcutree.c | 1 + 6 files changed, 41 insertions(+), 1 deletions(-)
include/linux/cpu.h +3 -0
@@ -51,6 +51,9 @@ struct notifier_block;#ifdef CONFIG_HOTPLUG_CPU extern int register_cpu_notifier (struct notifier_block *nb);extern void unregister_cpu_notifier (struct notifier_block *nb); +extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)); +extern int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *));#else #ifndef MODULE
include/linux/rcupdate.h +1 -0
@@ -65,6 +65,7 @@ extern void rcu_init(void);extern void rcu_scheduler_starting (void );extern int rcu_needs_cpu (int cpu);extern int rcu_scheduler_active; +extern int rcu_cpu_notified (void );#if defined(CONFIG_TREE_RCU )#include <linux/rcutree.h>
kernel/cpu.c +5 -0
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)return ret; } +int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return raw_notifier_chain_is_registered (&cpu_chain, fn); +} +#ifdef CONFIG_HOTPLUG_CPU EXPORT_SYMBOL (register_cpu_notifier);
kernel/notifier.c +23 -0
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,return -ENOENT ; } +static int notifier_chain_is_registered (struct notifier_block *nl, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +rcu_read_lock (); +/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */ +while (nl !=NULL ) { +/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */ +if (rcu_dereference (nl)->notifier_call == fn) { +rcu_read_unlock (); +return 1 ; + } + nl = (rcu_dereference (nl)->next); + } +rcu_read_unlock (); +return 0 ; +} + +int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return notifier_chain_is_registered (nh->head, fn); +} +/** * notifier_call_chain - Informs the registered notifiers about an event. * @nl: Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)extern int rcu_cpu_notify (struct notifier_block *self,unsigned long action,void *hcpu); -static int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self, +int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self,unsigned long action,void *hcpu) {rcu_cpu_notify (self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,return NOTIFY_OK ; } +int rcu_cpu_notified (void ) +{ +return cpu_notified (rcu_barrier_cpu_hotplug); +} +void __init rcu_init (void ) {int i;__rcu_init (); +WARN_ON_ONCE (!rcu_cpu_notified ());/* this one expected to trigger. */ hotcpu_notifier (rcu_barrier_cpu_hotplug,0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)unsigned long flags;WARN_ON_ONCE (rdp->beenonline ==0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * If an RCU GP has gone long enough, go check for dyntick
Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race
Quoted 8 lines · tip-bot for Paul E. McKenney
Commit-ID: 0d84abdae6740ee5290a7a523ee35916f65e16ec Gitweb: http://git.kernel.org/tip/0d84abdae6740ee5290a7a523ee35916f65e16ec Author: Paul E. McKenney <[email protected]> AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sat, 8 Aug 2009 16:51:08 +0200rcu: Add second diagnostic check for a possible CPU-hotplug race
hm, got this build failure in -tip testing:
kernel/rcupdate.c: In function ‘rcu_cpu_notified’:kernel/rcupdate.c:251: error: implicit declaration of function ‘cpu_notified’
with the config below.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Sat Aug 8 16:54:05 2009
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=yCONFIG_KTIME_SCALAR=y CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
# CONFIG_BROKEN_BOOT_DISALLOWED is not setCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not setCONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=32CONFIG_RCU_FANOUT_EXACT=yCONFIG_TREE_RCU_TRACE=y
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not setCONFIG_CGROUP_SCHED=yCONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not setCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=yCONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not setCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=y
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=y
# CONFIG_BUG is not setCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not setCONFIG_FUTEX=y
# CONFIG_EPOLL is not setCONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not setCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=1
# CONFIG_MODULES is not setCONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not setCONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not setCONFIG_SPARSE_IRQ=yCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=yCONFIG_X86_ELAN=yCONFIG_X86_RDC321X=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not setCONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not setCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=4CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_ALIGNMENT_16=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_X86_DEBUGCTLMSR=yCONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not setCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not setCONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not setCONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not setCONFIG_VM86=yCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_CPU_DEBUG=yCONFIG_UP_WANTED_1=yCONFIG_UP_WANTED_2=yCONFIG_UP_WANTED=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not setCONFIG_VMSPLIT_1G=yCONFIG_PAGE_OFFSET=0x40000000CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not setCONFIG_NEED_NODE_MEMMAP_SIZE=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not setCONFIG_ILLEGAL_POINTER_VALUE=0CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_STATIC=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_HIGHPTE=yCONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MATH_EMULATION=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR_ALL=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#CONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not setCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
# CONFIG_ACPI is not setCONFIG_X86_APM_BOOT=yCONFIG_APM=yCONFIG_APM_IGNORE_USER_SUSPEND=y
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not setCONFIG_APM_DISPLAY_BLANK=yCONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_PCIEAER=yCONFIG_PCIE_ECRC=yCONFIG_PCIEAER_INJECT=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=yCONFIG_PCI_DEBUG=yCONFIG_PCI_STUB=yCONFIG_HT_IRQ=yCONFIG_PCI_IOV=yCONFIG_ISA_DMA_API=yCONFIG_ISA=yCONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not setCONFIG_EISA_PCI_EISA=yCONFIG_EISA_VIRTUAL_ROOT=yCONFIG_EISA_NAMES=yCONFIG_MCA=yCONFIG_MCA_LEGACY=yCONFIG_MCA_PROC_FS=y
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not setCONFIG_PCCARD=yCONFIG_PCMCIA_DEBUG=yCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=y
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not setCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=yCONFIG_I82092=y
# CONFIG_I82365 is not setCONFIG_TCIC=yCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not setCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not setCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not setCONFIG_INET_AH=yCONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not setCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not setCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not setCONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not setCONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not setCONFIG_INET6_TUNNEL=yCONFIG_INET6_XFRM_MODE_TRANSPORT=yCONFIG_INET6_XFRM_MODE_TUNNEL=yCONFIG_INET6_XFRM_MODE_BEET=yCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_SIT is not setCONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_MARK is not setCONFIG_NETFILTER_XT_TARGET_NFLOG=yCONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not setCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not setCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
#
# IPv6: Netfilter Configuration
#CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not setCONFIG_IP6_NF_TARGET_LOG=yCONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_TARGET_REJECT is not setCONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not setCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not setCONFIG_ATM_BR2684=yCONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_BRIDGE is not setCONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not setCONFIG_X25=y
# CONFIG_LAPB is not setCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=yCONFIG_NET_DROP_MONITOR=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#CONFIG_MKISS=y
# CONFIG_6PACK is not setCONFIG_BPQETHER=yCONFIG_DMASCC=yCONFIG_SCC=y
# CONFIG_SCC_DELAY is not setCONFIG_SCC_TRXECHO=yCONFIG_BAYCOM_SER_FDX=yCONFIG_BAYCOM_SER_HDX=yCONFIG_YAM=yCONFIG_CAN=y
# CONFIG_CAN_RAW is not setCONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not setCONFIG_BT=yCONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not setCONFIG_BT_RFCOMM=yCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=yCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=yCONFIG_BT_HCIUART=yCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not setCONFIG_BT_HCIBPA10X=yCONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIDTL1 is not setCONFIG_BT_HCIBT3C=y
# CONFIG_BT_HCIBLUECARD is not setCONFIG_BT_HCIBTUART=y
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not setCONFIG_WIRELESS=yCONFIG_CFG80211=yCONFIG_CFG80211_REG_DEBUG=yCONFIG_CFG80211_DEBUGFS=y
# CONFIG_WIRELESS_OLD_REGULATORY is not setCONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=yCONFIG_LIB80211_DEBUG=y
# CONFIG_MAC80211 is not setCONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not setCONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_ISAPNP=yCONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
# CONFIG_PNPACPI is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_DEV_XD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not setCONFIG_ATA_OVER_ETH=yCONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_DELL_LAPTOP is not setCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not setCONFIG_CHR_DEV_SCH=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not setCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not setCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not setCONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not setCONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AHA152X is not setCONFIG_SCSI_AHA1740=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000CONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not setCONFIG_SCSI_MVSAS=yCONFIG_SCSI_MVSAS_DEBUG=yCONFIG_SCSI_DPT_I2O=yCONFIG_SCSI_ADVANSYS=yCONFIG_SCSI_IN2000=yCONFIG_SCSI_ARCMSR=yCONFIG_SCSI_ARCMSR_AER=yCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=yCONFIG_MEGARAID_MAILBOX=yCONFIG_MEGARAID_LEGACY=yCONFIG_MEGARAID_SAS=yCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT2SAS_LOGGING=yCONFIG_SCSI_HPTIOP=yCONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not setCONFIG_LIBFC=yCONFIG_LIBFCOE=yCONFIG_FCOE=yCONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not setCONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not setCONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_FD_MCS is not set
# CONFIG_SCSI_GDTH is not setCONFIG_SCSI_GENERIC_NCR5380=yCONFIG_SCSI_GENERIC_NCR5380_MMIO=y
# CONFIG_SCSI_GENERIC_NCR53C400 is not setCONFIG_SCSI_IBMMCA=y
# CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not setCONFIG_IBMMCA_SCSI_DEV_RESET=yCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=yCONFIG_SCSI_INIA100=y
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR_D700 is not setCONFIG_SCSI_STEX=yCONFIG_SCSI_SYM53C8XX_2=yCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=yCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_NCR_Q720=yCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20CONFIG_SCSI_PAS16=yCONFIG_SCSI_QLOGIC_FAS=yCONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not setCONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not setCONFIG_SCSI_SYM53C416=y
# CONFIG_SCSI_DC395x is not setCONFIG_SCSI_DC390T=yCONFIG_SCSI_T128=y
# CONFIG_SCSI_U14_34F is not setCONFIG_SCSI_ULTRASTOR=yCONFIG_SCSI_NSP32=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not setCONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not setCONFIG_SCSI_OSD_DPRINT_SENSE=1CONFIG_SCSI_OSD_DEBUG=yCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=yCONFIG_PDC_ADMA=yCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not setCONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not setCONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not setCONFIG_PATA_ALI=yCONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not setCONFIG_PATA_ATIIXP=yCONFIG_PATA_CMD640_PCI=yCONFIG_PATA_CMD64X=yCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5535 is not setCONFIG_PATA_CS5536=yCONFIG_PATA_CYPRESS=yCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=y
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not setCONFIG_PATA_ISAPNP=yCONFIG_PATA_IT821X=yCONFIG_PATA_IT8213=yCONFIG_PATA_JMICRON=yCONFIG_PATA_LEGACY=y
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=yCONFIG_PATA_NINJA32=y
# CONFIG_PATA_NS87410 is not setCONFIG_PATA_NS87415=y
# CONFIG_PATA_OPTI is not setCONFIG_PATA_OPTIDMA=yCONFIG_PATA_PCMCIA=yCONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_QDI is not setCONFIG_PATA_RADISYS=y
# CONFIG_PATA_RZ1000 is not setCONFIG_PATA_SC1200=yCONFIG_PATA_SERVERWORKS=yCONFIG_PATA_PDC2027X=y
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not setCONFIG_PATA_WINBOND_VLB=yCONFIG_PATA_PLATFORM=y
# CONFIG_PATA_SCH is not setCONFIG_MD=y
# CONFIG_BLK_DEV_MD is not setCONFIG_BLK_DEV_DM=yCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=yCONFIG_DM_LOG_USERSPACE=yCONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not setCONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not setCONFIG_FUSION=yCONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not setCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information.
#CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not setCONFIG_FIREWIRE_SBP2=yCONFIG_FIREWIRE_NET=y
# CONFIG_IEEE1394 is not setCONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not setCONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_CONFIG is not setCONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not setCONFIG_I2O_SCSI=yCONFIG_I2O_PROC=yCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=yCONFIG_VETH=yCONFIG_NET_SB1000=yCONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not setCONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not setCONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set CONFIG_REALTEK_PHY=yCONFIG_NATIONAL_PHY=yCONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=yCONFIG_MDIO_GPIO=yCONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set CONFIG_CASSINI=yCONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not setCONFIG_EL2=yCONFIG_ELPLUS=yCONFIG_EL16=yCONFIG_EL3=yCONFIG_3C515=yCONFIG_ELMC=y
# CONFIG_ELMC_II is not set CONFIG_VORTEX=y
# CONFIG_TYPHOON is not setCONFIG_LANCE=yCONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set CONFIG_ULTRA=y
# CONFIG_ULTRA32 is not set CONFIG_SMC9194=yCONFIG_ETHOC=yCONFIG_NET_VENDOR_RACAL=yCONFIG_NI5010=y
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
# CONFIG_DNET is not set CONFIG_NET_TULIP=yCONFIG_DE2104X=yCONFIG_DE2104X_DSL=0
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set CONFIG_WINBOND_840=y
# CONFIG_DM9102 is not set CONFIG_ULI526X=yCONFIG_AT1700=y
# CONFIG_DEPCA is not setCONFIG_HP100=yCONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set CONFIG_EEXPRESS=yCONFIG_EEXPRESS_PRO=yCONFIG_HPLAN=y
# CONFIG_LP486E is not setCONFIG_ETH16I=y
# CONFIG_NE2000 is not setCONFIG_ZNET=yCONFIG_SEEQ8005=yCONFIG_NE2_MCA=yCONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=yCONFIG_AC3200=yCONFIG_APRICOT=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=y
# CONFIG_CS89x0 is not setCONFIG_E100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not setCONFIG_ES3210=yCONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=yCONFIG_SIS900=yCONFIG_EPIC100=yCONFIG_SMSC9420=y
# CONFIG_SUNDANCE is not setCONFIG_TLAN=yCONFIG_KS8842=yCONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set CONFIG_SC92031=yCONFIG_ATL2=yCONFIG_NETDEV_1000=yCONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=yCONFIG_E1000=yCONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not setCONFIG_IGBVF=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not setCONFIG_SKGE=yCONFIG_SKGE_DEBUG=yCONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set CONFIG_VIA_VELOCITY=yCONFIG_TIGON3=yCONFIG_BNX2=yCONFIG_QLA3XXX=y
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not setCONFIG_JME=y
# CONFIG_NETDEV_10000 is not set CONFIG_MLX4_CORE=yCONFIG_TR=y
# CONFIG_IBMTR is not set
# CONFIG_IBMOL is not setCONFIG_IBMLS=yCONFIG_3C359=yCONFIG_TMS380TR=yCONFIG_TMSPCI=yCONFIG_SKISA=yCONFIG_PROTEON=yCONFIG_ABYSS=yCONFIG_MADGEMC=y
# CONFIG_SMCTR is not set
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=yCONFIG_STRIP=yCONFIG_ARLAN=yCONFIG_WAVELAN=yCONFIG_PCMCIA_WAVELAN=yCONFIG_PCMCIA_NETWAVE=yCONFIG_WLAN_80211=yCONFIG_PCMCIA_RAYCS=yCONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not setCONFIG_LIBERTAS_CS=y
# CONFIG_LIBERTAS_DEBUG is not setCONFIG_AIRO=y
# CONFIG_ATMEL is not setCONFIG_AIRO_CS=yCONFIG_PCMCIA_WL3501=yCONFIG_PRISM54=yCONFIG_USB_ZD1201=yCONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_IPW2100 is not setCONFIG_IPW2200=yCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=y
# CONFIG_IPW2200_PROMISCUOUS is not setCONFIG_IPW2200_QOS=yCONFIG_IPW2200_DEBUG=yCONFIG_LIBIPW=yCONFIG_LIBIPW_DEBUG=y
# CONFIG_HOSTAP is not setCONFIG_HERMES=y
# CONFIG_HERMES_CACHE_FW_ON_INIT is not setCONFIG_PLX_HERMES=yCONFIG_TMD_HERMES=yCONFIG_NORTEL_HERMES=y
# CONFIG_PCI_HERMES is not set
# CONFIG_PCMCIA_HERMES is not setCONFIG_PCMCIA_SPECTRUM=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not setCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SMSC95XX is not setCONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not setCONFIG_USB_NET_PLUSB=yCONFIG_USB_NET_MCS7830=yCONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not setCONFIG_USB_NET_ZAURUS=yCONFIG_USB_HSO=yCONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_NET_PCMCIA is not setCONFIG_WAN=y
# CONFIG_LANMEDIA is not setCONFIG_HDLC=yCONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set
#
# X.25/LAPB support is disabled
#CONFIG_PCI200SYN=yCONFIG_WANXL=yCONFIG_PC300TOO=yCONFIG_N2=y
# CONFIG_C101 is not setCONFIG_FARSYNC=yCONFIG_DLCI=yCONFIG_DLCI_MAX=8
# CONFIG_SDLA is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
# CONFIG_SBNI is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_IEEE802154_DRIVERS is not setCONFIG_FDDI=yCONFIG_DEFXX=yCONFIG_DEFXX_MMIO=yCONFIG_SKFP=y
# CONFIG_HIPPI is not setCONFIG_PPP=yCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=yCONFIG_PPP_MPPE=yCONFIG_PPPOE=yCONFIG_PPPOATM=yCONFIG_PPPOL2TP=yCONFIG_SLIP=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=yCONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=y
# CONFIG_ISDN is not setCONFIG_PHONE=y
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not setCONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not setCONFIG_MOUSE_APPLETOUCH=yCONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_INPORT is not setCONFIG_MOUSE_LOGIBM=yCONFIG_MOUSE_PC110PAD=yCONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not setCONFIG_MOUSE_SYNAPTICS_I2C=yCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not setCONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not setCONFIG_JOYSTICK_GF2K=yCONFIG_JOYSTICK_GRIP=yCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not setCONFIG_JOYSTICK_IFORCE=yCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not setCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_JOYDUMP=yCONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_AD7879_I2C=yCONFIG_TOUCHSCREEN_AD7879=yCONFIG_TOUCHSCREEN_DA9034=yCONFIG_TOUCHSCREEN_EETI=yCONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not setCONFIG_TOUCHSCREEN_WACOM_W8001=yCONFIG_TOUCHSCREEN_MTOUCH=yCONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not setCONFIG_TOUCHSCREEN_HTCPEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not setCONFIG_TOUCHSCREEN_TOUCHRIGHT=yCONFIG_TOUCHSCREEN_TOUCHWIN=yCONFIG_TOUCHSCREEN_WM97XX=yCONFIG_TOUCHSCREEN_WM9705=y
# CONFIG_TOUCHSCREEN_WM9712 is not setCONFIG_TOUCHSCREEN_WM9713=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=yCONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not setCONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not setCONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not setCONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not setCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_TOUCHIT213=yCONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not setCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=yCONFIG_GAMEPORT_EMU10K1=yCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not setCONFIG_SERIAL_8250_MCA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not setCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=yCONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not setCONFIG_IPMI_DEVICE_INTERFACE=yCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not setCONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not setCONFIG_R3964=yCONFIG_APPLICOM=yCONFIG_SONYPI=y
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=yCONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not setCONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not setCONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not setCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not setCONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not setCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_GPIO=y
# CONFIG_I2C_OCORES is not setCONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not setCONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_ELEKTOR=y
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_SCx200_ACB=y
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=yCONFIG_SENSORS_PCF8574=yCONFIG_PCF8575=y
# CONFIG_SENSORS_TSL2550 is not setCONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not setCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not setCONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCF857X is not setCONFIG_GPIO_TWL4030=y
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#CONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=yCONFIG_W1_MASTER_DS2482=yCONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not setCONFIG_W1_SLAVE_DS2433=yCONFIG_W1_SLAVE_DS2433_CRC=yCONFIG_W1_SLAVE_DS2760=yCONFIG_W1_SLAVE_BQ27000=yCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=yCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2782=yCONFIG_BATTERY_WM97XX=y
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_BATTERY_DA9030=yCONFIG_BATTERY_MAX17040=yCONFIG_CHARGER_PCF50633=y
# CONFIG_HWMON is not setCONFIG_THERMAL=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_TWL4030_WATCHDOG=yCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=yCONFIG_ALIM1535_WDT=yCONFIG_ALIM7101_WDT=yCONFIG_SC520_WDT=yCONFIG_IB700_WDT=yCONFIG_IBMASR=yCONFIG_WAFER_WDT=yCONFIG_I6300ESB_WDT=yCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not setCONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not setCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=yCONFIG_RDC321X_WDT=y
# CONFIG_60XX_WDT is not setCONFIG_SBC8360_WDT=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=yCONFIG_SMSC37B787_WDT=yCONFIG_W83627HF_WDT=y
# CONFIG_W83877F_WDT is not setCONFIG_W83977F_WDT=yCONFIG_MACHZ_WDT=yCONFIG_SBC_EPX_C3_WATCHDOG=y
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not setCONFIG_MIXCOMWD=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=yCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_SM501=yCONFIG_MFD_SM501_GPIO=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not setCONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not setCONFIG_PMIC_DA903X=yCONFIG_MFD_WM8400=yCONFIG_MFD_PCF50633=yCONFIG_PCF50633_ADC=yCONFIG_PCF50633_GPIO=yCONFIG_AB3100_CORE=y
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not setCONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not setCONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not setCONFIG_AGP_VIA=yCONFIG_AGP_EFFICEON=yCONFIG_DRM=yCONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not setCONFIG_DRM_SIS=y
# CONFIG_DRM_VIA is not setCONFIG_DRM_SAVAGE=yCONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not setCONFIG_FB_LITTLE_ENDIAN=yCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=yCONFIG_FB_ARC=yCONFIG_FB_IMSTT=y
# CONFIG_FB_UVESA is not setCONFIG_FB_N411=y
# CONFIG_FB_HGA is not setCONFIG_FB_S1D13XXX=yCONFIG_FB_NVIDIA=yCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not setCONFIG_FB_RIVA=yCONFIG_FB_RIVA_I2C=yCONFIG_FB_RIVA_DEBUG=yCONFIG_FB_RIVA_BACKLIGHT=yCONFIG_FB_LE80578=yCONFIG_FB_CARILLO_RANCH=yCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not setCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=yCONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_MATROX_MULTIHEAD is not setCONFIG_FB_ATY128=yCONFIG_FB_ATY128_BACKLIGHT=yCONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not setCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not setCONFIG_FB_SAVAGE=yCONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not setCONFIG_FB_SIS=yCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_VIA=yCONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not setCONFIG_FB_3DFX=yCONFIG_FB_3DFX_ACCEL=yCONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_VT8623=yCONFIG_FB_TRIDENT=yCONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=yCONFIG_FB_GEODE_GX=yCONFIG_FB_GEODE_GX1=yCONFIG_FB_TMIO=yCONFIG_FB_TMIO_ACCELL=yCONFIG_FB_SM501=y
# CONFIG_FB_METRONOME is not setCONFIG_FB_MB862XX=y
# CONFIG_FB_MB862XX_PCI_GDC is not setCONFIG_FB_BROADSHEET=yCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not setCONFIG_BACKLIGHT_DA903X=yCONFIG_BACKLIGHT_MBP_NVIDIA=yCONFIG_BACKLIGHT_SAHARA=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=yCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_HWDEP=yCONFIG_SND_RAWMIDI=yCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=yCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=yCONFIG_SND_DEBUG_VERBOSE=yCONFIG_SND_PCM_XRUN_DEBUG=yCONFIG_SND_VMASTER=yCONFIG_SND_RAWMIDI_SEQ=yCONFIG_SND_OPL3_LIB_SEQ=yCONFIG_SND_OPL4_LIB_SEQ=yCONFIG_SND_SBAWE_SEQ=y
# CONFIG_SND_EMU10K1_SEQ is not setCONFIG_SND_MPU401_UART=yCONFIG_SND_OPL3_LIB=yCONFIG_SND_OPL4_LIB=yCONFIG_SND_VX_LIB=yCONFIG_SND_AC97_CODEC=yCONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not setCONFIG_SND_VIRMIDI=yCONFIG_SND_SERIAL_U16550=yCONFIG_SND_MPU401=yCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=0CONFIG_SND_WSS_LIB=yCONFIG_SND_SB_COMMON=yCONFIG_SND_SB8_DSP=yCONFIG_SND_SB16_DSP=yCONFIG_SND_ISA=yCONFIG_SND_ADLIB=y
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not setCONFIG_SND_AZT2320=yCONFIG_SND_CMI8330=yCONFIG_SND_CS4231=yCONFIG_SND_CS4236=yCONFIG_SND_DT019X=yCONFIG_SND_ES968=yCONFIG_SND_ES1688=y
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not setCONFIG_SND_GUSCLASSIC=y
# CONFIG_SND_GUSEXTREME is not setCONFIG_SND_GUSMAX=yCONFIG_SND_INTERWAVE=yCONFIG_SND_INTERWAVE_STB=yCONFIG_SND_OPL3SA2=yCONFIG_SND_OPTI92X_AD1848=yCONFIG_SND_OPTI92X_CS4231=yCONFIG_SND_OPTI93X=yCONFIG_SND_MIRO=yCONFIG_SND_SB8=y
# CONFIG_SND_SB16 is not setCONFIG_SND_SBAWE=yCONFIG_SND_SB16_CSP=yCONFIG_SND_SGALAXY=yCONFIG_SND_SSCAPE=yCONFIG_SND_WAVEFRONT=yCONFIG_SND_MSND_PINNACLE=yCONFIG_SND_MSND_CLASSIC=yCONFIG_SND_PCI=yCONFIG_SND_AD1889=yCONFIG_SND_ALS300=yCONFIG_SND_ALS4000=yCONFIG_SND_ALI5451=y
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not setCONFIG_SND_AU8820=yCONFIG_SND_AU8830=yCONFIG_SND_AW2=yCONFIG_SND_AZT3328=yCONFIG_SND_BT87X=yCONFIG_SND_BT87X_OVERCLOCK=yCONFIG_SND_CA0106=yCONFIG_SND_CMIPCI=yCONFIG_SND_OXYGEN_LIB=y
# CONFIG_SND_OXYGEN is not setCONFIG_SND_CS4281=yCONFIG_SND_CS46XX=yCONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not setCONFIG_SND_CTXFI=y
# CONFIG_SND_DARLA20 is not setCONFIG_SND_GINA20=yCONFIG_SND_LAYLA20=yCONFIG_SND_DARLA24=yCONFIG_SND_GINA24=y
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not setCONFIG_SND_ECHO3G=y
# CONFIG_SND_INDIGO is not setCONFIG_SND_INDIGOIO=y
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not setCONFIG_SND_INDIGODJX=y
# CONFIG_SND_EMU10K1 is not setCONFIG_SND_EMU10K1X=y
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not setCONFIG_SND_ES1938=yCONFIG_SND_ES1968=yCONFIG_SND_FM801=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not setCONFIG_SND_HIFIER=yCONFIG_SND_ICE1712=yCONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not setCONFIG_SND_INTEL8X0M=yCONFIG_SND_KORG1212=yCONFIG_SND_LX6464ES=yCONFIG_SND_MAESTRO3=yCONFIG_SND_MIXART=y
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not setCONFIG_SND_RME32=yCONFIG_SND_RME96=yCONFIG_SND_RME9652=y
# CONFIG_SND_SIS7019 is not setCONFIG_SND_SONICVIBES=yCONFIG_SND_TRIDENT=yCONFIG_SND_VIA82XX=yCONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VIRTUOSO is not setCONFIG_SND_VX222=y
# CONFIG_SND_YMFPCI is not setCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_USX2Y is not setCONFIG_SND_USB_CAIAQ=yCONFIG_SND_USB_CAIAQ_INPUT=yCONFIG_SND_USB_US122L=yCONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not setCONFIG_SND_PDAUDIOCF=yCONFIG_SND_SOC=yCONFIG_SND_SOC_I2C_AND_SPI=yCONFIG_SND_SOC_ALL_CODECS=yCONFIG_SND_SOC_AD73311=yCONFIG_SND_SOC_AK4535=yCONFIG_SND_SOC_CS4270=yCONFIG_SND_SOC_L3=yCONFIG_SND_SOC_PCM3008=yCONFIG_SND_SOC_SPDIF=yCONFIG_SND_SOC_SSM2602=yCONFIG_SND_SOC_TLV320AIC23=yCONFIG_SND_SOC_TLV320AIC3X=yCONFIG_SND_SOC_TWL4030=yCONFIG_SND_SOC_UDA134X=yCONFIG_SND_SOC_UDA1380=yCONFIG_SND_SOC_WM8400=yCONFIG_SND_SOC_WM8510=yCONFIG_SND_SOC_WM8580=yCONFIG_SND_SOC_WM8728=yCONFIG_SND_SOC_WM8731=yCONFIG_SND_SOC_WM8750=yCONFIG_SND_SOC_WM8753=yCONFIG_SND_SOC_WM8900=yCONFIG_SND_SOC_WM8903=yCONFIG_SND_SOC_WM8940=yCONFIG_SND_SOC_WM8960=yCONFIG_SND_SOC_WM8971=yCONFIG_SND_SOC_WM8988=yCONFIG_SND_SOC_WM8990=yCONFIG_SND_SOC_WM9081=yCONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not setCONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not setCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not setCONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_MON is not setCONFIG_USB_WUSB=yCONFIG_USB_WUSB_CBAF=yCONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_ISP1760_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_U132_HCD=y
# CONFIG_USB_SL811_HCD is not setCONFIG_USB_R8A66597_HCD=yCONFIG_USB_HWA_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not setCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
#
# USB port drivers
#CONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not setCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not setCONFIG_USB_SERIAL_DIGI_ACCELEPORT=yCONFIG_USB_SERIAL_CP210X=yCONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not setCONFIG_USB_SERIAL_EDGEPORT_TI=yCONFIG_USB_SERIAL_GARMIN=yCONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not setCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_MOTOROLA=yCONFIG_USB_SERIAL_NAVMAN=yCONFIG_USB_SERIAL_PL2303=yCONFIG_USB_SERIAL_OTI6858=yCONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not setCONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not setCONFIG_USB_SERIAL_SIEMENS_MPI=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not setCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not setCONFIG_USB_SERIAL_OPTION=yCONFIG_USB_SERIAL_OMNINET=y
# CONFIG_USB_SERIAL_OPTICON is not setCONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not setCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not setCONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not setCONFIG_USB_LCD=yCONFIG_USB_BERRY_CHARGE=yCONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=yCONFIG_USB_APPLEDISPLAY=yCONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not setCONFIG_USB_ISIGHTFW=yCONFIG_USB_VST=yCONFIG_USB_ATM=yCONFIG_USB_SPEEDTOUCH=yCONFIG_USB_CXACRU=y
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not setCONFIG_NOP_USB_XCEIV=yCONFIG_UWB=yCONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not setCONFIG_UWB_WLP=yCONFIG_UWB_I1480U=yCONFIG_UWB_I1480U_WLP=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not setCONFIG_ACCESSIBILITY=yCONFIG_A11Y_BRAILLE_CONSOLE=yCONFIG_INFINIBAND=yCONFIG_INFINIBAND_USER_MAD=yCONFIG_INFINIBAND_USER_ACCESS=yCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=yCONFIG_INFINIBAND_MTHCA_DEBUG=yCONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not setCONFIG_MLX4_INFINIBAND=yCONFIG_INFINIBAND_NES=yCONFIG_INFINIBAND_NES_DEBUG=y
# CONFIG_INFINIBAND_IPOIB is not setCONFIG_INFINIBAND_SRP=yCONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not setCONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=yCONFIG_RTC_DRV_DS1374=yCONFIG_RTC_DRV_DS1672=yCONFIG_RTC_DRV_MAX6900=yCONFIG_RTC_DRV_RS5C372=yCONFIG_RTC_DRV_ISL1208=yCONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not setCONFIG_RTC_DRV_PCF8583=yCONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_TWL4030 is not setCONFIG_RTC_DRV_S35390A=yCONFIG_RTC_DRV_FM3130=yCONFIG_RTC_DRV_RX8581=yCONFIG_RTC_DRV_RX8025=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=yCONFIG_RTC_DRV_DS1511=yCONFIG_RTC_DRV_DS1553=yCONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not setCONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not setCONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_BQ4802 is not setCONFIG_RTC_DRV_V3020=yCONFIG_RTC_DRV_PCF50633=y
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=yCONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not setCONFIG_ASYNC_TX_DMA=yCONFIG_DMATEST=yCONFIG_DCA=yCONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
#
# TI VLYNQ
#CONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not setCONFIG_DCDBAS=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=y
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
# CONFIG_EXT4_FS_XATTR is not setCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=yCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not setCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not setCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=yCONFIG_QFMT_V1=yCONFIG_QFMT_V2=yCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=y
#
# Caches
#CONFIG_FSCACHE=yCONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_EXPORTFS=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=yCONFIG_ACORN_PARTITION_CUMANA=yCONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not setCONFIG_ACORN_PARTITION_ADFS=yCONFIG_ACORN_PARTITION_POWERTEC=yCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=yCONFIG_LDM_DEBUG=yCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not setCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not setCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=yCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not setCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y
# CONFIG_ALLOW_WARNINGS is not set CONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not set CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set CONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=yCONFIG_DEBUG_HIGHMEM=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set CONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_RCU_TORTURE_TEST=y CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_BACKTRACE_SELF_TEST=y CONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=y CONFIG_FAIL_MAKE_REQUEST=y CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FTRACE_SYSCALLS=y CONFIG_TRACER_MAX_TRACE=y CONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=yCONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set CONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=y CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_POWER_TRACER=yCONFIG_KSYM_TRACER=y CONFIG_PROFILE_KSYM_TRACER=y CONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_FTRACE is not set CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y CONFIG_PROVIDE_OHCI1394_DMA_INIT=y CONFIG_BUILD_DOCSRC=yCONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set CONFIG_SAMPLES=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
# CONFIG_KGDB_TESTS is not set CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=yCONFIG_IOMMU_STRESS=y CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not setCONFIG_SECURITY_PATH=yCONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_SELINUX is not setCONFIG_SECURITY_TOMOYO=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not setCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not setCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not setCONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not setCONFIG_CRYPTO_SALSA20=yCONFIG_CRYPTO_SALSA20_586=yCONFIG_CRYPTO_SEED=yCONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=yCONFIG_CRYPTO_DEV_PADLOCK_AES=yCONFIG_CRYPTO_DEV_PADLOCK_SHA=yCONFIG_CRYPTO_DEV_GEODE=yCONFIG_CRYPTO_DEV_HIFN_795X=yCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not setCONFIG_LGUEST=yCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=yCONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_BALLOON=yCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=yCONFIG_X86_32_ALWAYS_ON=y
Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · tip-bot for Paul E. McKenney
Commit-ID: 0d84abdae6740ee5290a7a523ee35916f65e16ec Gitweb: http://git.kernel.org/tip/0d84abdae6740ee5290a7a523ee35916f65e16ec Author: Paul E. McKenney <[email protected]> AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sat, 8 Aug 2009 16:51:08 +0200
Quoted 8 lines
Quoted 1 line
rcu: Add second diagnostic check for a possible CPU-hotplug race
hm, got this build failure in -tip testing:
kernel/rcupdate.c: In function ‘rcu_cpu_notified’:kernel/rcupdate.c:251: error: implicit declaration of function ‘cpu_notified’with the config below.
Gah... I didn't take !CONFIG_HOTPLUG_CPU into account. Fix below.
Thanx, Paul
------------------------------------------------------------------------
Fix build breakage in diagnostic patch.
Move cpu_notified() declaration out from under #ifdef.
---
cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/cpu.h +1 -1
@@ -45,13 +45,13 @@ extern int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls);extern void unregister_cpu (struct cpu *cpu);#endif struct notifier_block ; +extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *));#ifdef CONFIG_SMP /* Need to know about CPUs going up/down? */ #ifdef CONFIG_HOTPLUG_CPU extern int register_cpu_notifier (struct notifier_block *nb);extern void unregister_cpu_notifier (struct notifier_block *nb); -extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *));extern int raw_notifier_chain_is_registered (struct raw_notifier_head *nh,int (*fn)(struct notifier_block *,unsigned long ,void *));#else
[tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race
In reply to Paul E. McKenneyCommit-ID: 86f044729ee3e4d8885c17371ce5a76f6f321dc7 Gitweb: http://git.kernel.org/tip/86f044729ee3e4d8885c17371ce5a76f6f321dc7 Author: Paul E. McKenney <[email protected]> AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sun, 9 Aug 2009 12:42:48 +0200
rcu: Add second diagnostic check for a possible CPU-hotplug race
Create an rcu_cpu_notified() API that checks to see whether RCU's CPU-hotplug notifier is registered. This is used in three WARN_ON_ONCE() calls, the first of which should trigger, and the second two of which should not -- but I suspect that the WARN_ON_ONCE() located in __rcu_process_callbacks() will in fact trigger on the machine suffering from this bug. ;-)
Any code path that executes after rcu_init() should have RCU CPU-hotplug notifiers registered, so any triggering of the following WARN_ON_ONCE() after rcu_init() is a bug:
WARN_ON_ONCE(!rcu_cpu_notified());
-v2: fix build error
LKML-Reference: <[email protected]>
--- include/linux/cpu.h | 3 +++ include/linux/rcupdate.h | 1 + kernel/cpu.c | 5 +++++ kernel/notifier.c | 23 +++++++++++++++++++++++ kernel/rcupdate.c | 9 ++++++++- kernel/rcutree.c | 1 + 6 files changed, 41 insertions(+), 1 deletions(-)
include/linux/cpu.h +3 -0
@@ -45,12 +45,15 @@ extern int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls);extern void unregister_cpu (struct cpu *cpu);#endif struct notifier_block ; +extern int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *));#ifdef CONFIG_SMP /* Need to know about CPUs going up/down? */ #ifdef CONFIG_HOTPLUG_CPU extern int register_cpu_notifier (struct notifier_block *nb);extern void unregister_cpu_notifier (struct notifier_block *nb); +extern int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *));#else #ifndef MODULE
include/linux/rcupdate.h +1 -0
@@ -65,6 +65,7 @@ extern void rcu_init(void);extern void rcu_scheduler_starting (void );extern int rcu_needs_cpu (int cpu);extern int rcu_scheduler_active; +extern int rcu_cpu_notified (void );#if defined(CONFIG_TREE_RCU )#include <linux/rcutree.h>
kernel/cpu.c +5 -0
@@ -133,6 +133,11 @@ int __ref register_cpu_notifier(struct notifier_block *nb)return ret; } +int cpu_notified (int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return raw_notifier_chain_is_registered (&cpu_chain, fn); +} +#ifdef CONFIG_HOTPLUG_CPU EXPORT_SYMBOL (register_cpu_notifier);
kernel/notifier.c +23 -0
@@ -59,6 +59,29 @@ static int notifier_chain_unregister(struct notifier_block **nl,return -ENOENT ; } +static int notifier_chain_is_registered (struct notifier_block *nl, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +rcu_read_lock (); +/* printk(KERN_ALERT "notifier_chain_is_registered looking for: %pS\n", fn); */ +while (nl !=NULL ) { +/* printk(KERN_ALERT "notifier_chain_is_registered: %pS\n", rcu_dereference(nl)->notifier_call); */ +if (rcu_dereference (nl)->notifier_call == fn) { +rcu_read_unlock (); +return 1 ; + } + nl = (rcu_dereference (nl)->next); + } +rcu_read_unlock (); +return 0 ; +} + +int raw_notifier_chain_is_registered (struct raw_notifier_head *nh, +int (*fn)(struct notifier_block *,unsigned long ,void *)) +{ +return notifier_chain_is_registered (nh->head, fn); +} +/** * notifier_call_chain - Informs the registered notifiers about an event. * @nl: Pointer to head of the blocking notifier chain
kernel/rcupdate.c +8 -1
@@ -220,7 +220,7 @@ static void rcu_migrate_callback(struct rcu_head *notused)extern int rcu_cpu_notify (struct notifier_block *self,unsigned long action,void *hcpu); -static int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self, +int __cpuinit rcu_barrier_cpu_hotplug (struct notifier_block *self,unsigned long action,void *hcpu) {rcu_cpu_notify (self, action, hcpu);
@@ -246,12 +246,19 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,return NOTIFY_OK ; } +int rcu_cpu_notified (void ) +{ +return cpu_notified (rcu_barrier_cpu_hotplug); +} +void __init rcu_init (void ) {int i;__rcu_init (); +WARN_ON_ONCE (!rcu_cpu_notified ());/* this one expected to trigger. */ hotcpu_notifier (rcu_barrier_cpu_hotplug,0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * We don't need protection against CPU-hotplug here because
kernel/rcutree.c +1 -0
@@ -1133,6 +1133,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)unsigned long flags;WARN_ON_ONCE (rdp->beenonline ==0 ); +WARN_ON_ONCE (!rcu_cpu_notified ());/* * If an RCU GP has gone long enough, go check for dyntick
Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race
Quoted 8 lines · tip-bot for Paul E. McKenney
Commit-ID: 86f044729ee3e4d8885c17371ce5a76f6f321dc7 Gitweb: http://git.kernel.org/tip/86f044729ee3e4d8885c17371ce5a76f6f321dc7 Author: Paul E. McKenney <[email protected]> AuthorDate: Wed, 5 Aug 2009 18:26:45 -0700 Committer: Ingo Molnar <[email protected]> CommitDate: Sun, 9 Aug 2009 12:42:48 +0200rcu: Add second diagnostic check for a possible CPU-hotplug race
has a build problem too:
kernel/built-in.o: In function `rcu_cpu_notified':
(.text+0x1d787): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x1174): undefined reference to cpu_notified' kernel/built-in.o: In function rcu_init':
(.init.text+0x11a8): undefined reference to `cpu_notified'
Maybe we should simplify all those Kconfig rules? It's a maze.
Ingo