Add support for the Calao SBC35-A9G20 board
Subsystems (2)
PATCH 1/1 Add support for the Calao SBC35-A9G20 board
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
<http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND flash, two USB host ports, and an USB device port. More informations can be found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 7 + board/calao/sbc35_a9g20/Makefile | 55 ++++++++ board/calao/sbc35_a9g20/config.mk | 1 + board/calao/sbc35_a9g20/sbc35_a9g20.c | 197 ++++++++++++++++++++++++++++++ board/calao/sbc35_a9g20/spi.c | 57 +++++++++ cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- include/configs/sbc35_a9g20.h | 194 +++++++++++++++++++++++++++++ 9 files changed, 517 insertions(+), 1 deletions(-) create mode 100644 board/calao/sbc35_a9g20/Makefile create mode 100644 board/calao/sbc35_a9g20/config.mk create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c create mode 100644 board/calao/sbc35_a9g20/spi.c create mode 100644 include/configs/sbc35_a9g20.h
MAINTAINERS +4 -0
@@ -685,6 +685,10 @@ Andrea Scian <[email protected]> B2 ARM7TDMI (S3C44B0X) +Albin Tonnerre <[email protected]> + + sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC) + Greg Ungerer <[email protected]> cm4008 ks8695p
MAKEALL +1 -0
@@ -608,6 +608,7 @@ LIST_at91=" \ m501sk \ pm9261 \ pm9263 \ + SBC35_A9G20 \ " #########################################################################
Makefile +7 -0
@@ -2872,6 +2872,13 @@ at91sam9g45ekes_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 +SBC35_A9G20_NANDFLASH_config \ +SBC35_A9G20_EEPROM_config \ +SBC35_A9G20_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h + @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 + ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \
board/calao/sbc35_a9g20/Makefile new file +55 -0
55 lines not on this page · raw message
board/calao/sbc35_a9g20/config.mk new file +1 -0
@@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000
board/calao/sbc35_a9g20/sbc35_a9g20.c new file +197 -0
197 lines not on this page · raw message
board/calao/sbc35_a9g20/spi.c new file +57 -0
57 lines not on this page · raw message
cpu/arm926ejs/at91/at91sam9260_devices.c +1 -1
@@ -75,7 +75,7 @@ void at91_serial_hw_init(void)#endif } -#ifdef CONFIG_HAS_DATAFLASH +#if defined(CONFIG_HAS_DATAFLASH ) || defined(CONFIG_ATMEL_SPI )void at91_spi0_hw_init (unsigned long cs_mask) {at91_set_A_periph (AT91_PIN_PA0 ,0 );/* SPI0_MISO */
include/configs/sbc35_a9g20.h new file +194 -0
194 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 Add support for the Calao SBC35-A9G20 board
Quoted 8 lines · Albin Tonnerre
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
<http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND flash, two USB host ports, and an USB device port. More informations can be found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>Signed-off-by Albin Tonnerre <[email protected]>
Quoted 17 lines
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 7 + board/calao/sbc35_a9g20/Makefile | 55 ++++++++ board/calao/sbc35_a9g20/config.mk | 1 + board/calao/sbc35_a9g20/sbc35_a9g20.c | 197 ++++++++++++++++++++++++++++++ board/calao/sbc35_a9g20/spi.c | 57 +++++++++ cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- include/configs/sbc35_a9g20.h | 194 +++++++++++++++++++++++++++++ 9 files changed, 517 insertions(+), 1 deletions(-) create mode 100644 board/calao/sbc35_a9g20/Makefile create mode 100644 board/calao/sbc35_a9g20/config.mk create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c create mode 100644 board/calao/sbc35_a9g20/spi.c create mode 100644 include/configs/sbc35_a9g20.h
Applied to u-boot-arm
Best Regards,
J.