Skip to contentSkip to conversation

ARM Pull Request

U-Boot Applied Jean-Christophe PLAGNIOL-VILLARD 6 participants 19 messages Sep 5, 2009 – Sep 7, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

Ilko Iliev (1):

      DM9000 init for pm9261

Ilya Yanok (1):
imx27lite: add support for imx27lite board from LogicPD

Jean-Christophe PLAGNIOL-VILLARD (3):
omap: move TI's boards to board/ti/
arm: move Logicpd's boards to board/logicpd/
omap3: move the other boards to board/

Prafulla Wadaskar (1):
arm: Kirkwood: add SYSRSTn Duration Counter Support

Simon Kagstrom (1):
Remove duplicate set_cr

 MAINTAINERS                                        |   11 +
 MAKEALL                                            |    5 +
 Makefile                                           |   47 +++-
 board/afeb9260/afeb9260.c                          |    2 +-
 board/atmel/at91sam9260ek/at91sam9260ek.c          |    2 +-
 .../{imx31_litekit => calao/sbc35_a9g20}/Makefile  |   16 +-
 board/calao/sbc35_a9g20/config.mk                  |    1 +
 board/calao/sbc35_a9g20/sbc35_a9g20.c              |  197 +++++++++++++
 board/calao/sbc35_a9g20/spi.c                      |   57 ++++
 board/{imx31_litekit => calao/tny_a9260}/Makefile  |   16 +-
 board/calao/tny_a9260/config.mk                    |    1 +
 .../zoom2/debug_board.c => calao/tny_a9260/spi.c}  |   53 ++--
 board/calao/tny_a9260/tny_a9260.c                  |  110 +++++++
 board/{omap5912osk => logicpd/imx27lite}/Makefile  |    6 +-
 board/logicpd/imx27lite/config.mk                  |    1 +
 board/logicpd/imx27lite/imx27lite.c                |   73 +++++
 board/logicpd/imx27lite/lowlevel_init.S            |  170 +++++++++++
 board/{ => logicpd}/imx31_litekit/Makefile         |    0
 board/{ => logicpd}/imx31_litekit/config.mk        |    0
 board/{ => logicpd}/imx31_litekit/imx31_litekit.c  |    0
 board/{ => logicpd}/imx31_litekit/lowlevel_init.S  |    0
 board/{omap3 => logicpd}/zoom1/Makefile            |    0
 board/{omap3 => logicpd}/zoom1/config.mk           |    0
 board/{omap3 => logicpd}/zoom1/zoom1.c             |    0
 board/{omap3 => logicpd}/zoom1/zoom1.h             |    0
 board/{omap3 => logicpd}/zoom2/Makefile            |    0
 board/{omap3 => logicpd}/zoom2/config.mk           |    0
 board/{omap3 => logicpd}/zoom2/debug_board.c       |    0
 board/{omap3 => logicpd}/zoom2/led.c               |    0
 board/{omap3 => logicpd}/zoom2/zoom2.c             |    0
 board/{omap3 => logicpd}/zoom2/zoom2.h             |    0
 board/{omap3 => logicpd}/zoom2/zoom2_serial.c      |    0
 board/{omap3 => logicpd}/zoom2/zoom2_serial.h      |    0
 board/{omap3 => }/overo/Makefile                   |    0
 board/{omap3 => }/overo/config.mk                  |    0
 board/{omap3 => }/overo/overo.c                    |    0
 board/{omap3 => }/overo/overo.h                    |    0
 board/{omap3 => }/pandora/Makefile                 |    0
 board/{omap3 => }/pandora/config.mk                |    0
 board/{omap3 => }/pandora/pandora.c                |    0
 board/{omap3 => }/pandora/pandora.h                |    0
 board/ronetix/pm9261/pm9261.c                      |    7 +
 board/{omap3 => ti}/beagle/Makefile                |    0
 board/{omap3 => ti}/beagle/beagle.c                |    0
 board/{omap3 => ti}/beagle/beagle.h                |    0
 board/{omap3 => ti}/beagle/config.mk               |    0
 board/{omap3 => ti}/evm/Makefile                   |    0
 board/{omap3 => ti}/evm/config.mk                  |    0
 board/{omap3 => ti}/evm/evm.c                      |    0
 board/{omap3 => ti}/evm/evm.h                      |    0
 board/{ => ti}/omap1510inn/Makefile                |    0
 board/{ => ti}/omap1510inn/config.mk               |    0
 board/{ => ti}/omap1510inn/lowlevel_init.S         |    0
 board/{ => ti}/omap1510inn/omap1510innovator.c     |    0
 board/{ => ti}/omap1610inn/Makefile                |    0
 board/{ => ti}/omap1610inn/config.mk               |    0
 board/{ => ti}/omap1610inn/flash.c                 |    0
 board/{ => ti}/omap1610inn/lowlevel_init.S         |    0
 board/{ => ti}/omap1610inn/omap1610innovator.c     |    0
 board/{ => ti}/omap2420h4/Makefile                 |    0
 board/{ => ti}/omap2420h4/config.mk                |    0
 board/{ => ti}/omap2420h4/lowlevel_init.S          |    0
 board/{ => ti}/omap2420h4/mem.c                    |    0
 board/{ => ti}/omap2420h4/omap2420h4.c             |    0
 board/{ => ti}/omap2420h4/sys_info.c               |    0
 board/{ => ti}/omap5912osk/Makefile                |    0
 board/{ => ti}/omap5912osk/config.mk               |    0
 board/{ => ti}/omap5912osk/lowlevel_init.S         |    0
 board/{ => ti}/omap5912osk/omap5912osk.c           |    0
 board/{ => ti}/omap730p2/Makefile                  |    0
 board/{ => ti}/omap730p2/config.mk                 |    0
 board/{ => ti}/omap730p2/flash.c                   |    0
 board/{ => ti}/omap730p2/lowlevel_init.S           |    0
 board/{ => ti}/omap730p2/omap730p2.c               |    0
 board/{omap3/pandora => timll/devkit8000}/Makefile |    5 +-
 board/{omap3/beagle => timll/devkit8000}/config.mk |    6 +-
 .../beagle.c => timll/devkit8000/devkit8000.c}     |  118 ++++----
 .../beagle.h => timll/devkit8000/devkit8000.h}     |  283 +++++++++----------
 cpu/arm926ejs/at91/at91sam9260_devices.c           |    2 +-
 cpu/arm926ejs/kirkwood/cpu.c                       |   75 +++++
 cpu/arm926ejs/mx27/generic.c                       |   65 ++++
 doc/README.timll                                   |   15 +
 include/asm-arm/arch-kirkwood/cpu.h                |    2 +
 include/asm-arm/arch-mx27/imx-regs.h               |   12 +
 include/asm-arm/proc-armv/system.h                 |   30 --
 include/configs/devkit8000.h                       |  307 ++++++++++++++++++++
 include/configs/imx27lite.h                        |  252 ++++++++++++++++
 include/configs/sbc35_a9g20.h                      |  194 ++++++++++++
 include/configs/tny_a9260.h                        |  172 +++++++++++
 89 files changed, 2007 insertions(+), 306 deletions(-)
 copy board/{imx31_litekit => calao/sbc35_a9g20}/Makefile (78%)
 create mode 100644 board/calao/sbc35_a9g20/config.mk
 create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c
 create mode 100644 board/calao/sbc35_a9g20/spi.c
 copy board/{imx31_litekit => calao/tny_a9260}/Makefile (78%)
 create mode 100644 board/calao/tny_a9260/config.mk
 copy board/{omap3/zoom2/debug_board.c => calao/tny_a9260/spi.c} (50%)
 create mode 100644 board/calao/tny_a9260/tny_a9260.c
 copy board/{omap5912osk => logicpd/imx27lite}/Makefile (94%)
 create mode 100644 board/logicpd/imx27lite/config.mk
 create mode 100644 board/logicpd/imx27lite/imx27lite.c
 create mode 100644 board/logicpd/imx27lite/lowlevel_init.S
 rename board/{ => logicpd}/imx31_litekit/Makefile (100%)
 rename board/{ => logicpd}/imx31_litekit/config.mk (100%)
 rename board/{ => logicpd}/imx31_litekit/imx31_litekit.c (100%)
 rename board/{ => logicpd}/imx31_litekit/lowlevel_init.S (100%)
 rename board/{omap3 => logicpd}/zoom1/Makefile (100%)
 rename board/{omap3 => logicpd}/zoom1/config.mk (100%)
 rename board/{omap3 => logicpd}/zoom1/zoom1.c (100%)
 rename board/{omap3 => logicpd}/zoom1/zoom1.h (100%)
 rename board/{omap3 => logicpd}/zoom2/Makefile (100%)
 rename board/{omap3 => logicpd}/zoom2/config.mk (100%)
 rename board/{omap3 => logicpd}/zoom2/debug_board.c (100%)
 rename board/{omap3 => logicpd}/zoom2/led.c (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2.c (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2.h (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2_serial.c (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2_serial.h (100%)
 rename board/{omap3 => }/overo/Makefile (100%)
 rename board/{omap3 => }/overo/config.mk (100%)
 rename board/{omap3 => }/overo/overo.c (100%)
 rename board/{omap3 => }/overo/overo.h (100%)
 copy board/{omap3 => }/pandora/Makefile (100%)
 rename board/{omap3 => }/pandora/config.mk (100%)
 rename board/{omap3 => }/pandora/pandora.c (100%)
 rename board/{omap3 => }/pandora/pandora.h (100%)
 rename board/{omap3 => ti}/beagle/Makefile (100%)
 copy board/{omap3 => ti}/beagle/beagle.c (100%)
 copy board/{omap3 => ti}/beagle/beagle.h (100%)
 copy board/{omap3 => ti}/beagle/config.mk (100%)
 rename board/{omap3 => ti}/evm/Makefile (100%)
 rename board/{omap3 => ti}/evm/config.mk (100%)
 rename board/{omap3 => ti}/evm/evm.c (100%)
 rename board/{omap3 => ti}/evm/evm.h (100%)
 rename board/{ => ti}/omap1510inn/Makefile (100%)
 rename board/{ => ti}/omap1510inn/config.mk (100%)
 rename board/{ => ti}/omap1510inn/lowlevel_init.S (100%)
 rename board/{ => ti}/omap1510inn/omap1510innovator.c (100%)
 rename board/{ => ti}/omap1610inn/Makefile (100%)
 rename board/{ => ti}/omap1610inn/config.mk (100%)
 rename board/{ => ti}/omap1610inn/flash.c (100%)
 rename board/{ => ti}/omap1610inn/lowlevel_init.S (100%)
 rename board/{ => ti}/omap1610inn/omap1610innovator.c (100%)
 rename board/{ => ti}/omap2420h4/Makefile (100%)
 rename board/{ => ti}/omap2420h4/config.mk (100%)
 rename board/{ => ti}/omap2420h4/lowlevel_init.S (100%)
 rename board/{ => ti}/omap2420h4/mem.c (100%)
 rename board/{ => ti}/omap2420h4/omap2420h4.c (100%)
 rename board/{ => ti}/omap2420h4/sys_info.c (100%)
 rename board/{ => ti}/omap5912osk/Makefile (100%)
 rename board/{ => ti}/omap5912osk/config.mk (100%)
 rename board/{ => ti}/omap5912osk/lowlevel_init.S (100%)
 rename board/{ => ti}/omap5912osk/omap5912osk.c (100%)
 rename board/{ => ti}/omap730p2/Makefile (100%)
 rename board/{ => ti}/omap730p2/config.mk (100%)
 rename board/{ => ti}/omap730p2/flash.c (100%)
 rename board/{ => ti}/omap730p2/lowlevel_init.S (100%)
 rename board/{ => ti}/omap730p2/omap730p2.c (100%)
 rename board/{omap3/pandora => timll/devkit8000}/Makefile (93%)
 rename board/{omap3/beagle => timll/devkit8000}/config.mk (90%)
 rename board/{omap3/beagle/beagle.c => timll/devkit8000/devkit8000.c} (53%)
 rename board/{omap3/beagle/beagle.h => timll/devkit8000/devkit8000.h} (62%)
 create mode 100644 doc/README.timll
 create mode 100644 include/configs/devkit8000.h
 create mode 100644 include/configs/imx27lite.h
 create mode 100644 include/configs/sbc35_a9g20.h
 create mode 100644 include/configs/tny_a9260.h

Best Regards,
J.

#1 lore raw

Dear Jean-Christophe,

Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Quoted 7 lines

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

Additionally,

http://lists.denx.de/pipermail/u-boot/2009-August/058492.html

is missing so that the Samsung developers can go on.

Dirk

#2 lore raw
Quoted 19 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Quoted 4 lines
Quoted 2 lines

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Quoted 4 lines

Additionally,

http://lists.denx.de/pipermail/u-boot/2009-August/058492.html

as I said now more than 10 times on omap3 we can use the generic ARMV7 cache code as on Samsung

Best Regards,
J.

#3 lore raw
Quoted 20 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 19 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

Quoted 4 lines
Quoted 3 lines

Additionally,

http://lists.denx.de/pipermail/u-boot/2009-August/058492.html

as I said now more than 10 times

Jean-Christophe: I doubt that you mentioned this more than 10 times ;)

Quoted 2 lines

on omap3 we can use the generic ARMV7 cache
code as on Samsung

Jean-Christophe: Unfortunately, this is not the topic we are talking about here.

At the moment we are talking about

a) Moving the existing code to an OMAP3 specific directory so that others can go on. Not stalling them any longer.

b) By doing (a), making sure not changing/breaking any existing code/functionality

c) http://lists.denx.de/pipermail/u-boot/2009-August/058543.html

And if you insist on your "we don't need this code", please re-read

http://lists.denx.de/pipermail/u-boot/2009-August/059026.html

All: The main topic here is (a). So somebody with commit rights:
Please apply

http://lists.denx.de/pipermail/u-boot/2009-August/058492.html

so that others, mainly Samsung, can go on and isn't stalled further.

OMAP3 specific discussion can go on in an other thread, then.

Many thanks and best regards

Dirk

#4 lore raw
Quoted 23 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

Quoted 8 lines
Quoted 2 lines
Quoted 1 line

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

in v4 the author prefer it devkit8000 so I respect it

Quoted 5 lines
Quoted 2 lines

on omap3 we can use the generic ARMV7 cache
code as on Samsung

Jean-Christophe: Unfortunately, this is not the topic we are talking about here.

yes it's, as intead of fix the code we just move it

Quoted 6 lines

At the moment we are talking about

a) Moving the existing code to an OMAP3 specific directory so that others can go on. Not stalling them any longer.

Quoted 8 lines

b) By doing (a), making sure not changing/breaking any existing code/functionality

c) http://lists.denx.de/pipermail/u-boot/2009-August/058543.html

And if you insist on your "we don't need this code", please re-read

http://lists.denx.de/pipermail/u-boot/2009-August/059026.html

Yes I insist to remove the code and use a generic code as much we can for the l2_cache I'm fine to move to omap3 as it's really omap3 specific but I do want to have the generic v7_flush_dcache_all use for omap3 too

Quoted 3 lines

All: The main topic here is (a). So somebody with commit rights:

No the topic here is to do the right thing

move code which need to be re-write is incorrect
as Samsung will re-introduce the v7_flush_dcache_all for their soc so where they will store it?

in cpu/arm_cortexa8/samsung/cache.S

and if we add a new soc which will need the code we will duplicate it agains no

we clearly need to clean the omap3 and not force other soc to duplicate code just because on soc

Best Regards,
J.

#5 lore raw
Quoted 24 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 23 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
Quoted 1 line

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

Quoted 1 line

for the l2_cache I'm fine to move to omap3 as it's really omap3 specific

Again, you confuse people. From your previous mail:

"as I said now more than 10 times on omap3 we can use the generic ARMV7 cache code"

Quoted 1 line

we clearly need to clean the omap3 and not force other soc to duplicate code

With

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we just try to do the opposite: Move the custom code away so that Samsung can use its own (generic?) implementation.

Dirk

#6 lore raw
Quoted 27 lines · Dirk Behme
Quoted 26 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 25 lines · Dirk Behme
Quoted 24 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 14 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Quoted 8 lines
Quoted 7 lines

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Quoted 8 lines
Quoted 6 lines
Quoted 5 lines

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/. This appears to be the patch version that Jean-Christophe picked, and v6 was "dirty" (added the same file 2x) as well.

Best,
Peter

#7 lore raw
Quoted 32 lines · Peter Tyser
Quoted 31 lines · Dirk Behme
Quoted 30 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 29 lines · Dirk Behme
Quoted 20 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 19 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

we agreed on omap3_devkit8000.

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/.

And I vote (as agreed like mentioned above) for omap3_devkit8000.h as this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.

Best regards

Dirk

#8 lore raw
Quoted 37 lines · Dirk Behme
Quoted 36 lines · Peter Tyser
Quoted 34 lines · Dirk Behme
Quoted 24 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 23 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
Quoted 1 line

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

Quoted 7 lines
Quoted 3 lines

My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/.

And I vote (as agreed like mentioned above) for omap3_devkit8000.h as this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.

I consider the current board omap3_* config file names incorrect. Naming the devkit8000 omap3_devkit8000 might be consistent with some other misnamed boards, but its wrong in my opinion. We should just get rid of the omap3_ prefix on those few config files if we want to be consistent.

eg rename:
omap3_beagle.h to beagle.h
omap3_evm.h to evm.h
...

This will be consistent with the board name in board/, as well as follow the convention of every other board in U-Boot.

Best,
Peter

#9 lore raw
In reply to Dirk Behme
Quoted 54 lines · Dirk Behme
Quoted 43 lines · Peter Tyser
Quoted 41 lines · Dirk Behme
Quoted 39 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 37 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 20 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/.

Quoted 9 lines

And I vote (as agreed like mentioned above) for omap3_devkit8000.h as this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.

Best regards

Dirk

I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?

My opinion on naming is to keep omap3_ prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use the omap3_ prefix.

If we want to break the config names, we should do it after a release. A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.

Tom

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#10 lore raw

Dear Tom,

Quoted 4 lines · In message <[email protected]> you wrote:

I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?

That's actually a good idea, if possible.

Quoted 3 lines

My opinion on naming is to keep omap3_ prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use the omap3_ prefix.

NAK. This violates the current naming scheme.

Quoted 1 line

If we want to break the config names, we should do it after a release.

This what he have now: merge window time. Time for restructuring.

Quoted 2 lines

A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.

NAK. Rather do it immediately, before that grows even further.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A person who is more than casually interested in computers should  be
well  schooled in machine language, since it is a fundamental part of
a computer.                                           -- Donald Knuth
#11 lore raw
Quoted 30 lines · Wolfgang Denk

Dear Tom,

Quoted 4 lines · In message <[email protected]> you wrote:

I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?

That's actually a good idea, if possible.

Quoted 4 lines

My opinion on naming is to keep omap3_ prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use the omap3_ prefix.

NAK. This violates the current naming scheme.

Quoted 2 lines

If we want to break the config names, we should do it after a release.

This what he have now: merge window time. Time for restructuring.

Quoted 3 lines

A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.

Quoted 7 lines

NAK. Rather do it immediately, before that grows even further.

Best regards,

Wolfgang Denk

Ok
I will take care of making the changes if they don't already exist. Tom

#12 lore raw
In reply to Tom
Quoted 65 lines · Tom
Quoted 55 lines · Dirk Behme
Quoted 45 lines · Peter Tyser
Quoted 43 lines · Dirk Behme
Quoted 41 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 39 lines · Dirk Behme
Quoted 23 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme

Dear Jean-Christophe,

Quoted 17 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

Please pull
The following changes since commit
3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Frederik Kriewitz (1):
Add support for the DevKit8000 board

I'd like to have the omap3_devkit8000.h version of that patch, instead.

this one is fine no need not the omap3_devkit8000 version

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/.

Quoted 9 lines

And I vote (as agreed like mentioned above) for omap3_devkit8000.h as this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.

Best regards

Dirk

Quoted 7 lines

I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?

My opinion on naming is to keep omap3_ prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use the omap3_ prefix.

I agree here, so we are at least 2 ;)

If you really want to change U-Boot's user build interface for OMAP3, please remember how many documentation you will break with this. And additionally, please remember how many user you will confuse with this. At least for BeagleBoard there are already some thousand boards out there.

Best regards

Dirk

Quoted 13 lines

If we want to break the config names, we should do it after a release. A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.

Tom

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#13 lore raw
In reply to Dirk Behme

Dear Dirk Behme,

Quoted 4 lines · In message <[email protected]> you wrote:
Quoted 4 lines

My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/.

ACK.

Quoted 3 lines

And I vote (as agreed like mentioned above) for omap3_devkit8000.h as this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.

I hear your vote, but in this case you are alone against eveybody else. This "standard OMAP3 config file naming convention" is something that needs to and will be cleaned up.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This all sounds complicated, but it mostly does excatly what you  ex-
pect. It's just difficult for us to explain what you expect...
                       - L. Wall & R. L. Schwartz, _Programming Perl_
#14 lore raw
In reply to Dirk Behme
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines

Jean-Christophe: In

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

we agreed on omap3_devkit8000.

in v4 the author prefer it devkit8000 so I respect it

You missed v5 and v6, no?

no I did not as Frederik Kriewitz said this
'Oh yes, do we really need a v7? Or is v4 (with timll vendor directory) ok'

so I applied this one as the patch is ok

Quoted 5 lines
Quoted 2 lines

for the l2_cache I'm fine to move to omap3 as it's really omap3 specific

Again, you confuse people. From your previous mail:

Quoted 8 lines

"as I said now more than 10 times on omap3 we can use the generic ARMV7 cache code"

Quoted 1 line

we clearly need to clean the omap3 and not force other soc to duplicate code

With

http://lists.denx.de/pipermail/u-boot/2009-August/059087.html

???

Quoted 3 lines

we just try to do the opposite: Move the custom code away so that Samsung can use its own (generic?) implementation.

When I've said we do not need the custom code for omap3 either so omap3 and Samsung can use the same code the generic one

Best Regards,
J.

#15 lore raw
In reply to Jean-Christophe PLAGNIOL-VILLARD

Hello Wolfgang,

The following changes since commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8:
Wolfgang Denk (1):
ARM: Update mach-types

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git master

Eric Millbrandt (1):
Reset i2c slave devices during init on mpc5xxx cpus

Timur Tabi (1):
fsl_i2c: increase I2C timeout values and make them configurable

 README                       |    7 ++++++
 cpu/mpc5xxx/i2c.c            |   49 ++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/fsl_i2c.c        |   24 +++++++++++++++++---
 include/configs/galaxy5200.h |    1 +
 4 files changed, 77 insertions(+), 4 deletions(-)
Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#16 lore raw

Hello Wolfgang,

Sorry, wrong subject ... should be

[U-Boot] i2c Pull Request ...

No idea, how this happend ... (seems, i digged actually to long in an error on an arm plattform ;-)

Quoted 13 lines · Heiko Schocher

Hello Wolfgang,

The following changes since commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8:
Wolfgang Denk (1):
ARM: Update mach-types

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git master

Eric Millbrandt (1):
Reset i2c slave devices during init on mpc5xxx cpus

Quoted 10 lines

Timur Tabi (1):
fsl_i2c: increase I2C timeout values and make them configurable

 README                       |    7 ++++++
 cpu/mpc5xxx/i2c.c            |   49 ++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/fsl_i2c.c        |   24 +++++++++++++++++---
 include/configs/galaxy5200.h |    1 +
 4 files changed, 77 insertions(+), 4 deletions(-)

bye
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#17 lore raw
In reply to Heiko Schocher

Dear Heiko Schocher,

Quoted 13 lines · In message <[email protected]> you wrote:

Hello Wolfgang,

The following changes since commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8:
Wolfgang Denk (1):
ARM: Update mach-types

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git master

Eric Millbrandt (1):
Reset i2c slave devices during init on mpc5xxx cpus

Quoted 8 lines

Timur Tabi (1):
fsl_i2c: increase I2C timeout values and make them configurable

 README                       |    7 ++++++
 cpu/mpc5xxx/i2c.c            |   49 ++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/fsl_i2c.c        |   24 +++++++++++++++++---
 include/configs/galaxy5200.h |    1 +
 4 files changed, 77 insertions(+), 4 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There you go man, Keep as cool as you can. It riles them  to  believe
that you perceive the web they weave. Keep on being free!
#18 lore raw
In reply to Jean-Christophe PLAGNIOL-VILLARD

Dear Jean-Christophe PLAGNIOL-VILLARD,

Quoted 195 lines · In message <[email protected]> you wrote:

Hi,

Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards

Frederik Kriewitz (1):
Add support for the DevKit8000 board

Ilko Iliev (1):

      DM9000 init for pm9261

Ilya Yanok (1):
imx27lite: add support for imx27lite board from LogicPD

Jean-Christophe PLAGNIOL-VILLARD (3):
omap: move TI's boards to board/ti/
arm: move Logicpd's boards to board/logicpd/
omap3: move the other boards to board/

Prafulla Wadaskar (1):
arm: Kirkwood: add SYSRSTn Duration Counter Support

Simon Kagstrom (1):
Remove duplicate set_cr

 MAINTAINERS                                        |   11 +
 MAKEALL                                            |    5 +
 Makefile                                           |   47 +++-
 board/afeb9260/afeb9260.c                          |    2 +-
 board/atmel/at91sam9260ek/at91sam9260ek.c          |    2 +-
 .../{imx31_litekit => calao/sbc35_a9g20}/Makefile  |   16 +-
 board/calao/sbc35_a9g20/config.mk                  |    1 +
 board/calao/sbc35_a9g20/sbc35_a9g20.c              |  197 +++++++++++++
 board/calao/sbc35_a9g20/spi.c                      |   57 ++++
 board/{imx31_litekit => calao/tny_a9260}/Makefile  |   16 +-
 board/calao/tny_a9260/config.mk                    |    1 +
 .../zoom2/debug_board.c => calao/tny_a9260/spi.c}  |   53 ++--
 board/calao/tny_a9260/tny_a9260.c                  |  110 +++++++
 board/{omap5912osk => logicpd/imx27lite}/Makefile  |    6 +-
 board/logicpd/imx27lite/config.mk                  |    1 +
 board/logicpd/imx27lite/imx27lite.c                |   73 +++++
 board/logicpd/imx27lite/lowlevel_init.S            |  170 +++++++++++
 board/{ => logicpd}/imx31_litekit/Makefile         |    0
 board/{ => logicpd}/imx31_litekit/config.mk        |    0
 board/{ => logicpd}/imx31_litekit/imx31_litekit.c  |    0
 board/{ => logicpd}/imx31_litekit/lowlevel_init.S  |    0
 board/{omap3 => logicpd}/zoom1/Makefile            |    0
 board/{omap3 => logicpd}/zoom1/config.mk           |    0
 board/{omap3 => logicpd}/zoom1/zoom1.c             |    0
 board/{omap3 => logicpd}/zoom1/zoom1.h             |    0
 board/{omap3 => logicpd}/zoom2/Makefile            |    0
 board/{omap3 => logicpd}/zoom2/config.mk           |    0
 board/{omap3 => logicpd}/zoom2/debug_board.c       |    0
 board/{omap3 => logicpd}/zoom2/led.c               |    0
 board/{omap3 => logicpd}/zoom2/zoom2.c             |    0
 board/{omap3 => logicpd}/zoom2/zoom2.h             |    0
 board/{omap3 => logicpd}/zoom2/zoom2_serial.c      |    0
 board/{omap3 => logicpd}/zoom2/zoom2_serial.h      |    0
 board/{omap3 => }/overo/Makefile                   |    0
 board/{omap3 => }/overo/config.mk                  |    0
 board/{omap3 => }/overo/overo.c                    |    0
 board/{omap3 => }/overo/overo.h                    |    0
 board/{omap3 => }/pandora/Makefile                 |    0
 board/{omap3 => }/pandora/config.mk                |    0
 board/{omap3 => }/pandora/pandora.c                |    0
 board/{omap3 => }/pandora/pandora.h                |    0
 board/ronetix/pm9261/pm9261.c                      |    7 +
 board/{omap3 => ti}/beagle/Makefile                |    0
 board/{omap3 => ti}/beagle/beagle.c                |    0
 board/{omap3 => ti}/beagle/beagle.h                |    0
 board/{omap3 => ti}/beagle/config.mk               |    0
 board/{omap3 => ti}/evm/Makefile                   |    0
 board/{omap3 => ti}/evm/config.mk                  |    0
 board/{omap3 => ti}/evm/evm.c                      |    0
 board/{omap3 => ti}/evm/evm.h                      |    0
 board/{ => ti}/omap1510inn/Makefile                |    0
 board/{ => ti}/omap1510inn/config.mk               |    0
 board/{ => ti}/omap1510inn/lowlevel_init.S         |    0
 board/{ => ti}/omap1510inn/omap1510innovator.c     |    0
 board/{ => ti}/omap1610inn/Makefile                |    0
 board/{ => ti}/omap1610inn/config.mk               |    0
 board/{ => ti}/omap1610inn/flash.c                 |    0
 board/{ => ti}/omap1610inn/lowlevel_init.S         |    0
 board/{ => ti}/omap1610inn/omap1610innovator.c     |    0
 board/{ => ti}/omap2420h4/Makefile                 |    0
 board/{ => ti}/omap2420h4/config.mk                |    0
 board/{ => ti}/omap2420h4/lowlevel_init.S          |    0
 board/{ => ti}/omap2420h4/mem.c                    |    0
 board/{ => ti}/omap2420h4/omap2420h4.c             |    0
 board/{ => ti}/omap2420h4/sys_info.c               |    0
 board/{ => ti}/omap5912osk/Makefile                |    0
 board/{ => ti}/omap5912osk/config.mk               |    0
 board/{ => ti}/omap5912osk/lowlevel_init.S         |    0
 board/{ => ti}/omap5912osk/omap5912osk.c           |    0
 board/{ => ti}/omap730p2/Makefile                  |    0
 board/{ => ti}/omap730p2/config.mk                 |    0
 board/{ => ti}/omap730p2/flash.c                   |    0
 board/{ => ti}/omap730p2/lowlevel_init.S           |    0
 board/{ => ti}/omap730p2/omap730p2.c               |    0
 board/{omap3/pandora => timll/devkit8000}/Makefile |    5 +-
 board/{omap3/beagle => timll/devkit8000}/config.mk |    6 +-
 .../beagle.c => timll/devkit8000/devkit8000.c}     |  118 ++++----
 .../beagle.h => timll/devkit8000/devkit8000.h}     |  283 +++++++++----------
 cpu/arm926ejs/at91/at91sam9260_devices.c           |    2 +-
 cpu/arm926ejs/kirkwood/cpu.c                       |   75 +++++
 cpu/arm926ejs/mx27/generic.c                       |   65 ++++
 doc/README.timll                                   |   15 +
 include/asm-arm/arch-kirkwood/cpu.h                |    2 +
 include/asm-arm/arch-mx27/imx-regs.h               |   12 +
 include/asm-arm/proc-armv/system.h                 |   30 --
 include/configs/devkit8000.h                       |  307 ++++++++++++++++++++
 include/configs/imx27lite.h                        |  252 ++++++++++++++++
 include/configs/sbc35_a9g20.h                      |  194 ++++++++++++
 include/configs/tny_a9260.h                        |  172 +++++++++++
 89 files changed, 2007 insertions(+), 306 deletions(-)
 copy board/{imx31_litekit => calao/sbc35_a9g20}/Makefile (78%)
 create mode 100644 board/calao/sbc35_a9g20/config.mk
 create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c
 create mode 100644 board/calao/sbc35_a9g20/spi.c
 copy board/{imx31_litekit => calao/tny_a9260}/Makefile (78%)
 create mode 100644 board/calao/tny_a9260/config.mk
 copy board/{omap3/zoom2/debug_board.c => calao/tny_a9260/spi.c} (50%)
 create mode 100644 board/calao/tny_a9260/tny_a9260.c
 copy board/{omap5912osk => logicpd/imx27lite}/Makefile (94%)
 create mode 100644 board/logicpd/imx27lite/config.mk
 create mode 100644 board/logicpd/imx27lite/imx27lite.c
 create mode 100644 board/logicpd/imx27lite/lowlevel_init.S
 rename board/{ => logicpd}/imx31_litekit/Makefile (100%)
 rename board/{ => logicpd}/imx31_litekit/config.mk (100%)
 rename board/{ => logicpd}/imx31_litekit/imx31_litekit.c (100%)
 rename board/{ => logicpd}/imx31_litekit/lowlevel_init.S (100%)
 rename board/{omap3 => logicpd}/zoom1/Makefile (100%)
 rename board/{omap3 => logicpd}/zoom1/config.mk (100%)
 rename board/{omap3 => logicpd}/zoom1/zoom1.c (100%)
 rename board/{omap3 => logicpd}/zoom1/zoom1.h (100%)
 rename board/{omap3 => logicpd}/zoom2/Makefile (100%)
 rename board/{omap3 => logicpd}/zoom2/config.mk (100%)
 rename board/{omap3 => logicpd}/zoom2/debug_board.c (100%)
 rename board/{omap3 => logicpd}/zoom2/led.c (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2.c (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2.h (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2_serial.c (100%)
 rename board/{omap3 => logicpd}/zoom2/zoom2_serial.h (100%)
 rename board/{omap3 => }/overo/Makefile (100%)
 rename board/{omap3 => }/overo/config.mk (100%)
 rename board/{omap3 => }/overo/overo.c (100%)
 rename board/{omap3 => }/overo/overo.h (100%)
 copy board/{omap3 => }/pandora/Makefile (100%)
 rename board/{omap3 => }/pandora/config.mk (100%)
 rename board/{omap3 => }/pandora/pandora.c (100%)
 rename board/{omap3 => }/pandora/pandora.h (100%)
 rename board/{omap3 => ti}/beagle/Makefile (100%)
 copy board/{omap3 => ti}/beagle/beagle.c (100%)
 copy board/{omap3 => ti}/beagle/beagle.h (100%)
 copy board/{omap3 => ti}/beagle/config.mk (100%)
 rename board/{omap3 => ti}/evm/Makefile (100%)
 rename board/{omap3 => ti}/evm/config.mk (100%)
 rename board/{omap3 => ti}/evm/evm.c (100%)
 rename board/{omap3 => ti}/evm/evm.h (100%)
 rename board/{ => ti}/omap1510inn/Makefile (100%)
 rename board/{ => ti}/omap1510inn/config.mk (100%)
 rename board/{ => ti}/omap1510inn/lowlevel_init.S (100%)
 rename board/{ => ti}/omap1510inn/omap1510innovator.c (100%)
 rename board/{ => ti}/omap1610inn/Makefile (100%)
 rename board/{ => ti}/omap1610inn/config.mk (100%)
 rename board/{ => ti}/omap1610inn/flash.c (100%)
 rename board/{ => ti}/omap1610inn/lowlevel_init.S (100%)
 rename board/{ => ti}/omap1610inn/omap1610innovator.c (100%)
 rename board/{ => ti}/omap2420h4/Makefile (100%)
 rename board/{ => ti}/omap2420h4/config.mk (100%)
 rename board/{ => ti}/omap2420h4/lowlevel_init.S (100%)
 rename board/{ => ti}/omap2420h4/mem.c (100%)
 rename board/{ => ti}/omap2420h4/omap2420h4.c (100%)
 rename board/{ => ti}/omap2420h4/sys_info.c (100%)
 rename board/{ => ti}/omap5912osk/Makefile (100%)
 rename board/{ => ti}/omap5912osk/config.mk (100%)
 rename board/{ => ti}/omap5912osk/lowlevel_init.S (100%)
 rename board/{ => ti}/omap5912osk/omap5912osk.c (100%)
 rename board/{ => ti}/omap730p2/Makefile (100%)
 rename board/{ => ti}/omap730p2/config.mk (100%)
 rename board/{ => ti}/omap730p2/flash.c (100%)
 rename board/{ => ti}/omap730p2/lowlevel_init.S (100%)
 rename board/{ => ti}/omap730p2/omap730p2.c (100%)
 rename board/{omap3/pandora => timll/devkit8000}/Makefile (93%)
Quoted 8 lines
 rename board/{omap3/beagle => timll/devkit8000}/config.mk (90%)
 rename board/{omap3/beagle/beagle.c => timll/devkit8000/devkit8000.c} (53%)
 rename board/{omap3/beagle/beagle.h => timll/devkit8000/devkit8000.h} (62%)
 create mode 100644 doc/README.timll
 create mode 100644 include/configs/devkit8000.h
 create mode 100644 include/configs/imx27lite.h
 create mode 100644 include/configs/sbc35_a9g20.h
 create mode 100644 include/configs/tny_a9260.h

Appleid, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Little known fact about Middle Earth:   The Hobbits had a very sophi-
sticated computer network!   It was a Tolkien Ring...