ARM Pull Request
Hi,
Please pull
The following changes since commit 3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../next
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards
Frederik Kriewitz (1):
Add support for the DevKit8000 board
Ilko Iliev (1):
DM9000 init for pm9261
Ilya Yanok (1):
imx27lite: add support for imx27lite board from LogicPD
Jean-Christophe PLAGNIOL-VILLARD (3):
omap: move TI's boards to board/ti/
arm: move Logicpd's boards to board/logicpd/
omap3: move the other boards to board/
Prafulla Wadaskar (1):
arm: Kirkwood: add SYSRSTn Duration Counter Support
Simon Kagstrom (1):
Remove duplicate set_cr
MAINTAINERS | 11 +
MAKEALL | 5 +
Makefile | 47 +++-
board/afeb9260/afeb9260.c | 2 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 2 +-
.../{imx31_litekit => calao/sbc35_a9g20}/Makefile | 16 +-
board/calao/sbc35_a9g20/config.mk | 1 +
board/calao/sbc35_a9g20/sbc35_a9g20.c | 197 +++++++++++++
board/calao/sbc35_a9g20/spi.c | 57 ++++
board/{imx31_litekit => calao/tny_a9260}/Makefile | 16 +-
board/calao/tny_a9260/config.mk | 1 +
.../zoom2/debug_board.c => calao/tny_a9260/spi.c} | 53 ++--
board/calao/tny_a9260/tny_a9260.c | 110 +++++++
board/{omap5912osk => logicpd/imx27lite}/Makefile | 6 +-
board/logicpd/imx27lite/config.mk | 1 +
board/logicpd/imx27lite/imx27lite.c | 73 +++++
board/logicpd/imx27lite/lowlevel_init.S | 170 +++++++++++
board/{ => logicpd}/imx31_litekit/Makefile | 0
board/{ => logicpd}/imx31_litekit/config.mk | 0
board/{ => logicpd}/imx31_litekit/imx31_litekit.c | 0
board/{ => logicpd}/imx31_litekit/lowlevel_init.S | 0
board/{omap3 => logicpd}/zoom1/Makefile | 0
board/{omap3 => logicpd}/zoom1/config.mk | 0
board/{omap3 => logicpd}/zoom1/zoom1.c | 0
board/{omap3 => logicpd}/zoom1/zoom1.h | 0
board/{omap3 => logicpd}/zoom2/Makefile | 0
board/{omap3 => logicpd}/zoom2/config.mk | 0
board/{omap3 => logicpd}/zoom2/debug_board.c | 0
board/{omap3 => logicpd}/zoom2/led.c | 0
board/{omap3 => logicpd}/zoom2/zoom2.c | 0
board/{omap3 => logicpd}/zoom2/zoom2.h | 0
board/{omap3 => logicpd}/zoom2/zoom2_serial.c | 0
board/{omap3 => logicpd}/zoom2/zoom2_serial.h | 0
board/{omap3 => }/overo/Makefile | 0
board/{omap3 => }/overo/config.mk | 0
board/{omap3 => }/overo/overo.c | 0
board/{omap3 => }/overo/overo.h | 0
board/{omap3 => }/pandora/Makefile | 0
board/{omap3 => }/pandora/config.mk | 0
board/{omap3 => }/pandora/pandora.c | 0
board/{omap3 => }/pandora/pandora.h | 0
board/ronetix/pm9261/pm9261.c | 7 +
board/{omap3 => ti}/beagle/Makefile | 0
board/{omap3 => ti}/beagle/beagle.c | 0
board/{omap3 => ti}/beagle/beagle.h | 0
board/{omap3 => ti}/beagle/config.mk | 0
board/{omap3 => ti}/evm/Makefile | 0
board/{omap3 => ti}/evm/config.mk | 0
board/{omap3 => ti}/evm/evm.c | 0
board/{omap3 => ti}/evm/evm.h | 0
board/{ => ti}/omap1510inn/Makefile | 0
board/{ => ti}/omap1510inn/config.mk | 0
board/{ => ti}/omap1510inn/lowlevel_init.S | 0
board/{ => ti}/omap1510inn/omap1510innovator.c | 0
board/{ => ti}/omap1610inn/Makefile | 0
board/{ => ti}/omap1610inn/config.mk | 0
board/{ => ti}/omap1610inn/flash.c | 0
board/{ => ti}/omap1610inn/lowlevel_init.S | 0
board/{ => ti}/omap1610inn/omap1610innovator.c | 0
board/{ => ti}/omap2420h4/Makefile | 0
board/{ => ti}/omap2420h4/config.mk | 0
board/{ => ti}/omap2420h4/lowlevel_init.S | 0
board/{ => ti}/omap2420h4/mem.c | 0
board/{ => ti}/omap2420h4/omap2420h4.c | 0
board/{ => ti}/omap2420h4/sys_info.c | 0
board/{ => ti}/omap5912osk/Makefile | 0
board/{ => ti}/omap5912osk/config.mk | 0
board/{ => ti}/omap5912osk/lowlevel_init.S | 0
board/{ => ti}/omap5912osk/omap5912osk.c | 0
board/{ => ti}/omap730p2/Makefile | 0
board/{ => ti}/omap730p2/config.mk | 0
board/{ => ti}/omap730p2/flash.c | 0
board/{ => ti}/omap730p2/lowlevel_init.S | 0
board/{ => ti}/omap730p2/omap730p2.c | 0
board/{omap3/pandora => timll/devkit8000}/Makefile | 5 +-
board/{omap3/beagle => timll/devkit8000}/config.mk | 6 +-
.../beagle.c => timll/devkit8000/devkit8000.c} | 118 ++++----
.../beagle.h => timll/devkit8000/devkit8000.h} | 283 +++++++++----------
cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
cpu/arm926ejs/kirkwood/cpu.c | 75 +++++
cpu/arm926ejs/mx27/generic.c | 65 ++++
doc/README.timll | 15 +
include/asm-arm/arch-kirkwood/cpu.h | 2 +
include/asm-arm/arch-mx27/imx-regs.h | 12 +
include/asm-arm/proc-armv/system.h | 30 --
include/configs/devkit8000.h | 307 ++++++++++++++++++++
include/configs/imx27lite.h | 252 ++++++++++++++++
include/configs/sbc35_a9g20.h | 194 ++++++++++++
include/configs/tny_a9260.h | 172 +++++++++++
89 files changed, 2007 insertions(+), 306 deletions(-)
copy board/{imx31_litekit => calao/sbc35_a9g20}/Makefile (78%)
create mode 100644 board/calao/sbc35_a9g20/config.mk
create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c
create mode 100644 board/calao/sbc35_a9g20/spi.c
copy board/{imx31_litekit => calao/tny_a9260}/Makefile (78%)
create mode 100644 board/calao/tny_a9260/config.mk
copy board/{omap3/zoom2/debug_board.c => calao/tny_a9260/spi.c} (50%)
create mode 100644 board/calao/tny_a9260/tny_a9260.c
copy board/{omap5912osk => logicpd/imx27lite}/Makefile (94%)
create mode 100644 board/logicpd/imx27lite/config.mk
create mode 100644 board/logicpd/imx27lite/imx27lite.c
create mode 100644 board/logicpd/imx27lite/lowlevel_init.S
rename board/{ => logicpd}/imx31_litekit/Makefile (100%)
rename board/{ => logicpd}/imx31_litekit/config.mk (100%)
rename board/{ => logicpd}/imx31_litekit/imx31_litekit.c (100%)
rename board/{ => logicpd}/imx31_litekit/lowlevel_init.S (100%)
rename board/{omap3 => logicpd}/zoom1/Makefile (100%)
rename board/{omap3 => logicpd}/zoom1/config.mk (100%)
rename board/{omap3 => logicpd}/zoom1/zoom1.c (100%)
rename board/{omap3 => logicpd}/zoom1/zoom1.h (100%)
rename board/{omap3 => logicpd}/zoom2/Makefile (100%)
rename board/{omap3 => logicpd}/zoom2/config.mk (100%)
rename board/{omap3 => logicpd}/zoom2/debug_board.c (100%)
rename board/{omap3 => logicpd}/zoom2/led.c (100%)
rename board/{omap3 => logicpd}/zoom2/zoom2.c (100%)
rename board/{omap3 => logicpd}/zoom2/zoom2.h (100%)
rename board/{omap3 => logicpd}/zoom2/zoom2_serial.c (100%)
rename board/{omap3 => logicpd}/zoom2/zoom2_serial.h (100%)
rename board/{omap3 => }/overo/Makefile (100%)
rename board/{omap3 => }/overo/config.mk (100%)
rename board/{omap3 => }/overo/overo.c (100%)
rename board/{omap3 => }/overo/overo.h (100%)
copy board/{omap3 => }/pandora/Makefile (100%)
rename board/{omap3 => }/pandora/config.mk (100%)
rename board/{omap3 => }/pandora/pandora.c (100%)
rename board/{omap3 => }/pandora/pandora.h (100%)
rename board/{omap3 => ti}/beagle/Makefile (100%)
copy board/{omap3 => ti}/beagle/beagle.c (100%)
copy board/{omap3 => ti}/beagle/beagle.h (100%)
copy board/{omap3 => ti}/beagle/config.mk (100%)
rename board/{omap3 => ti}/evm/Makefile (100%)
rename board/{omap3 => ti}/evm/config.mk (100%)
rename board/{omap3 => ti}/evm/evm.c (100%)
rename board/{omap3 => ti}/evm/evm.h (100%)
rename board/{ => ti}/omap1510inn/Makefile (100%)
rename board/{ => ti}/omap1510inn/config.mk (100%)
rename board/{ => ti}/omap1510inn/lowlevel_init.S (100%)
rename board/{ => ti}/omap1510inn/omap1510innovator.c (100%)
rename board/{ => ti}/omap1610inn/Makefile (100%)
rename board/{ => ti}/omap1610inn/config.mk (100%)
rename board/{ => ti}/omap1610inn/flash.c (100%)
rename board/{ => ti}/omap1610inn/lowlevel_init.S (100%)
rename board/{ => ti}/omap1610inn/omap1610innovator.c (100%)
rename board/{ => ti}/omap2420h4/Makefile (100%)
rename board/{ => ti}/omap2420h4/config.mk (100%)
rename board/{ => ti}/omap2420h4/lowlevel_init.S (100%)
rename board/{ => ti}/omap2420h4/mem.c (100%)
rename board/{ => ti}/omap2420h4/omap2420h4.c (100%)
rename board/{ => ti}/omap2420h4/sys_info.c (100%)
rename board/{ => ti}/omap5912osk/Makefile (100%)
rename board/{ => ti}/omap5912osk/config.mk (100%)
rename board/{ => ti}/omap5912osk/lowlevel_init.S (100%)
rename board/{ => ti}/omap5912osk/omap5912osk.c (100%)
rename board/{ => ti}/omap730p2/Makefile (100%)
rename board/{ => ti}/omap730p2/config.mk (100%)
rename board/{ => ti}/omap730p2/flash.c (100%)
rename board/{ => ti}/omap730p2/lowlevel_init.S (100%)
rename board/{ => ti}/omap730p2/omap730p2.c (100%)
rename board/{omap3/pandora => timll/devkit8000}/Makefile (93%)
rename board/{omap3/beagle => timll/devkit8000}/config.mk (90%)
rename board/{omap3/beagle/beagle.c => timll/devkit8000/devkit8000.c} (53%)
rename board/{omap3/beagle/beagle.h => timll/devkit8000/devkit8000.h} (62%)
create mode 100644 doc/README.timll
create mode 100644 include/configs/devkit8000.h
create mode 100644 include/configs/imx27lite.h
create mode 100644 include/configs/sbc35_a9g20.h
create mode 100644 include/configs/tny_a9260.hBest Regards,
J.
Dear Jean-Christophe,
Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmaster
Quoted 7 lines
Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsFrederik Kriewitz (1):
Add support for the DevKit8000 board
I'd like to have the omap3_devkit8000.h version of that patch, instead.
Additionally,
http://lists.denx.de/pipermail/u-boot/2009-August/058492.html
is missing so that the Samsung developers can go on.
Dirk
Quoted 19 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards
Quoted 4 lines
Quoted 2 lines
Frederik Kriewitz (1):
Add support for the DevKit8000 boardI'd like to have the
omap3_devkit8000.hversion of that patch, instead.
this one is fine no need not the omap3_devkit8000 version
Quoted 4 lines
Additionally,
http://lists.denx.de/pipermail/u-boot/2009-August/058492.html
as I said now more than 10 times on omap3 we can use the generic ARMV7 cache code as on Samsung
Best Regards,
J.
Quoted 20 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 19 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boards
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Frederik Kriewitz (1):
Add support for the DevKit8000 boardI'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000version
Jean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on omap3_devkit8000.
Quoted 4 lines
Quoted 3 lines
Additionally,
http://lists.denx.de/pipermail/u-boot/2009-August/058492.html
as I said now more than 10 times
Jean-Christophe: I doubt that you mentioned this more than 10 times ;)
Quoted 2 lines
on omap3 we can use the generic ARMV7 cache
code as on Samsung
Jean-Christophe: Unfortunately, this is not the topic we are talking about here.
At the moment we are talking about
a) Moving the existing code to an OMAP3 specific directory so that others can go on. Not stalling them any longer.
b) By doing (a), making sure not changing/breaking any existing code/functionality
c) http://lists.denx.de/pipermail/u-boot/2009-August/058543.html
And if you insist on your "we don't need this code", please re-read
http://lists.denx.de/pipermail/u-boot/2009-August/059026.html
All: The main topic here is (a). So somebody with commit rights:
Please apply
http://lists.denx.de/pipermail/u-boot/2009-August/058492.html
so that others, mainly Samsung, can go on and isn't stalled further.
OMAP3 specific discussion can go on in an other thread, then.
Many thanks and best regards
Dirk
Quoted 23 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsFrederik Kriewitz (1):
Add support for the DevKit8000 board
Quoted 8 lines
Quoted 2 lines
Quoted 1 line
I'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000versionJean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.
in v4 the author prefer it devkit8000 so I respect it
Quoted 5 lines
Quoted 2 lines
on omap3 we can use the generic ARMV7 cache
code as on SamsungJean-Christophe: Unfortunately, this is not the topic we are talking about here.
yes it's, as intead of fix the code we just move it
Quoted 6 lines
At the moment we are talking about
a) Moving the existing code to an OMAP3 specific directory so that others can go on. Not stalling them any longer.
Quoted 8 lines
b) By doing (a), making sure not changing/breaking any existing code/functionality
c) http://lists.denx.de/pipermail/u-boot/2009-August/058543.html
And if you insist on your "we don't need this code", please re-read
http://lists.denx.de/pipermail/u-boot/2009-August/059026.html
Yes I insist to remove the code and use a generic code as much we can for the l2_cache I'm fine to move to omap3 as it's really omap3 specific but I do want to have the generic v7_flush_dcache_all use for omap3 too
Quoted 3 lines
All: The main topic here is (a). So somebody with commit rights:
No the topic here is to do the right thing
move code which need to be re-write is incorrect
as Samsung will re-introduce the v7_flush_dcache_all for their soc so where they will store it?
in cpu/arm_cortexa8/samsung/cache.S
and if we add a new soc which will need the code we will duplicate it agains no
we clearly need to clean the omap3 and not force other soc to duplicate code just because on soc
Best Regards,
J.
Quoted 24 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 23 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsFrederik Kriewitz (1):
Add support for the DevKit8000 board
Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
Quoted 1 line
I'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000versionJean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
Quoted 1 line
for the
l2_cacheI'm fine to move to omap3 as it's really omap3 specific
Again, you confuse people. From your previous mail:
"as I said now more than 10 times on omap3 we can use the generic ARMV7 cache code"
Quoted 1 line
we clearly need to clean the omap3 and not force other soc to duplicate code
With
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we just try to do the opposite: Move the custom code away so that Samsung can use its own (generic?) implementation.
Dirk
Quoted 27 lines · Dirk Behme
Quoted 26 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 25 lines · Dirk Behme
Quoted 24 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 14 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterQuoted 8 lines
Quoted 7 lines
Albin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsFrederik Kriewitz (1):
Add support for the DevKit8000 boardI'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000version
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
Jean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
My vote is for keeping the board config file named devkit8000.h - that's U-Boot's current, standard naming convention and it matches up with the board name under board/. This appears to be the patch version that Jean-Christophe picked, and v6 was "dirty" (added the same file 2x) as well.
Best,
Peter
Quoted 32 lines · Peter Tyser
Quoted 31 lines · Dirk Behme
Quoted 30 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 29 lines · Dirk Behme
Quoted 20 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 19 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsQuoted 4 lines
Quoted 3 lines
Quoted 2 lines
Frederik Kriewitz (1):
Add support for the DevKit8000 boardI'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000versionJean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line
we agreed on
omap3_devkit8000.in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
My vote is for keeping the board config file named
devkit8000.h- that's U-Boot's current, standard naming convention and it matches up with the board name under board/.
And I vote (as agreed like mentioned above) for omap3_devkit8000.h as this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.
Best regards
Dirk
Quoted 37 lines · Dirk Behme
Quoted 36 lines · Peter Tyser
Quoted 34 lines · Dirk Behme
Quoted 24 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 23 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsFrederik Kriewitz (1):
Add support for the DevKit8000 boardQuoted 8 lines
Quoted 7 lines
Quoted 2 lines
Quoted 1 line
I'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000versionJean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
Quoted 7 lines
Quoted 3 lines
My vote is for keeping the board config file named
devkit8000.h- that's U-Boot's current, standard naming convention and it matches up with the board name under board/.And I vote (as agreed like mentioned above) for
omap3_devkit8000.has this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.
I consider the current board omap3_* config file names incorrect. Naming the devkit8000 omap3_devkit8000 might be consistent with some other misnamed boards, but its wrong in my opinion. We should just get rid of the omap3_ prefix on those few config files if we want to be consistent.
eg rename:omap3_beagle.h to beagle.homap3_evm.h to evm.h
...
This will be consistent with the board name in board/, as well as follow the convention of every other board in U-Boot.
Best,
Peter
Quoted 54 lines · Dirk Behme
Quoted 43 lines · Peter Tyser
Quoted 41 lines · Dirk Behme
Quoted 39 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 37 lines · Dirk Behme
Quoted 22 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 20 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Frederik Kriewitz (1):
Add support for the DevKit8000 boardI'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000versionJean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
My vote is for keeping the board config file named
devkit8000.h- that's U-Boot's current, standard naming convention and it matches up with the board name under board/.
Quoted 9 lines
And I vote (as agreed like mentioned above) for
omap3_devkit8000.has this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.Best regards
Dirk
I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?
My opinion on naming is to keep omap3_ prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use the omap3_ prefix.
If we want to break the config names, we should do it after a release. A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.
Tom
Quoted 5 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Tom,
Quoted 4 lines · In message <[email protected]> you wrote:
I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?
That's actually a good idea, if possible.
Quoted 3 lines
My opinion on naming is to keep
omap3_prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use theomap3_prefix.
NAK. This violates the current naming scheme.
Quoted 1 line
If we want to break the config names, we should do it after a release.
This what he have now: merge window time. Time for restructuring.
Quoted 2 lines
A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.
NAK. Rather do it immediately, before that grows even further.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A person who is more than casually interested in computers should be well schooled in machine language, since it is a fundamental part of a computer. -- Donald Knuth
Quoted 30 lines · Wolfgang Denk
Dear Tom,
Quoted 4 lines · In message <[email protected]> you wrote:
I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?That's actually a good idea, if possible.
Quoted 4 lines
My opinion on naming is to keep
omap3_prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use theomap3_prefix.NAK. This violates the current naming scheme.
Quoted 2 lines
If we want to break the config names, we should do it after a release.
This what he have now: merge window time. Time for restructuring.
Quoted 3 lines
A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.
Quoted 7 lines
NAK. Rather do it immediately, before that grows even further.
Best regards,
Wolfgang Denk
Ok
I will take care of making the changes if they don't already exist. Tom
Quoted 65 lines · Tom
Quoted 55 lines · Dirk Behme
Quoted 45 lines · Peter Tyser
Quoted 43 lines · Dirk Behme
Quoted 41 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 39 lines · Dirk Behme
Quoted 23 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 21 lines · Dirk Behme
Dear Jean-Christophe,
Quoted 17 lines · Jean-Christophe PLAGNIOL-VILLARD
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsQuoted 8 lines
Quoted 6 lines
Quoted 3 lines
Frederik Kriewitz (1):
Add support for the DevKit8000 boardI'd like to have the
omap3_devkit8000.hversion of that patch, instead.this one is fine no need not the
omap3_devkit8000versionJean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
My vote is for keeping the board config file named
devkit8000.h- that's U-Boot's current, standard naming convention and it matches up with the board name under board/.Quoted 9 lines
And I vote (as agreed like mentioned above) for
omap3_devkit8000.has this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.Best regards
Dirk
Quoted 7 lines
I know i may be muddying this up but..
The devkit8000 looks a lot like the beagle.
Have you already thought of just rolling devkit8000 into beagle?My opinion on naming is to keep
omap3_prefix consistent. People used to building with their favorite omap3_* config should continue. For now, new omap3 boards to use theomap3_prefix.
I agree here, so we are at least 2 ;)
If you really want to change U-Boot's user build interface for OMAP3, please remember how many documentation you will break with this. And additionally, please remember how many user you will confuse with this. At least for BeagleBoard there are already some thousand boards out there.
Best regards
Dirk
Quoted 13 lines
If we want to break the config names, we should do it after a release. A good time for that will be when the omap4 versions come in and we have to figure out how to put them in.
Tom
Quoted 5 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Dirk Behme,
Quoted 4 lines · In message <[email protected]> you wrote:
Quoted 4 lines
My vote is for keeping the board config file named
devkit8000.h- that's U-Boot's current, standard naming convention and it matches up with the board name under board/.
ACK.
Quoted 3 lines
And I vote (as agreed like mentioned above) for
omap3_devkit8000.has this is the current, standard OMAP3 config file naming convention which matches with all other OMAP3 configs.
I hear your vote, but in this case you are alone against eveybody else. This "standard OMAP3 config file naming convention" is something that needs to and will be cleaned up.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This all sounds complicated, but it mostly does excatly what you ex-
pect. It's just difficult for us to explain what you expect...
- L. Wall & R. L. Schwartz, _Programming Perl_Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
Jean-Christophe: In
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
we agreed on
omap3_devkit8000.in v4 the author prefer it devkit8000 so I respect it
You missed v5 and v6, no?
no I did not as Frederik Kriewitz said this
'Oh yes, do we really need a v7? Or is v4 (with timll vendor directory) ok'
so I applied this one as the patch is ok
Quoted 5 lines
Quoted 2 lines
for the
l2_cacheI'm fine to move to omap3 as it's really omap3 specificAgain, you confuse people. From your previous mail:
Quoted 8 lines
"as I said now more than 10 times on omap3 we can use the generic ARMV7 cache code"
Quoted 1 line
we clearly need to clean the omap3 and not force other soc to duplicate code
With
http://lists.denx.de/pipermail/u-boot/2009-August/059087.html
???
Quoted 3 lines
we just try to do the opposite: Move the custom code away so that Samsung can use its own (generic?) implementation.
When I've said we do not need the custom code for omap3 either so omap3 and Samsung can use the same code the generic one
Best Regards,
J.
Hello Wolfgang,
The following changes since commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8:
Wolfgang Denk (1):
ARM: Update mach-types
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Eric Millbrandt (1):
Reset i2c slave devices during init on mpc5xxx cpus
Timur Tabi (1):
fsl_i2c: increase I2C timeout values and make them configurable
README | 7 ++++++ cpu/mpc5xxx/i2c.c | 49 ++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/fsl_i2c.c | 24 +++++++++++++++++--- include/configs/galaxy5200.h | 1 + 4 files changed, 77 insertions(+), 4 deletions(-)
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hello Wolfgang,
Sorry, wrong subject ... should be
[U-Boot] i2c Pull Request ...
No idea, how this happend ... (seems, i digged actually to long in an error on an arm plattform ;-)
Quoted 13 lines · Heiko Schocher
Hello Wolfgang,
The following changes since commit
9f23ca42b3ba19b24e66fade572f2b86d929b6e8:
Wolfgang Denk (1):
ARM: Update mach-typesare available in the git repository at:
git://git.denx.de/u-boot-i2c.gitmasterEric Millbrandt (1):
Reset i2c slave devices during init on mpc5xxx cpus
Quoted 10 lines
Timur Tabi (1):
fsl_i2c: increase I2C timeout values and make them configurableREADME | 7 ++++++ cpu/mpc5xxx/i2c.c | 49 ++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/fsl_i2c.c | 24 +++++++++++++++++--- include/configs/galaxy5200.h | 1 + 4 files changed, 77 insertions(+), 4 deletions(-)
bye
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedDear Heiko Schocher,
Quoted 13 lines · In message <[email protected]> you wrote:
Hello Wolfgang,
The following changes since commit
9f23ca42b3ba19b24e66fade572f2b86d929b6e8:
Wolfgang Denk (1):
ARM: Update mach-typesare available in the git repository at:
git://git.denx.de/u-boot-i2c.gitmasterEric Millbrandt (1):
Reset i2c slave devices during init on mpc5xxx cpus
Quoted 8 lines
Timur Tabi (1):
fsl_i2c: increase I2C timeout values and make them configurableREADME | 7 ++++++ cpu/mpc5xxx/i2c.c | 49 ++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/fsl_i2c.c | 24 +++++++++++++++++--- include/configs/galaxy5200.h | 1 + 4 files changed, 77 insertions(+), 4 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There you go man, Keep as cool as you can. It riles them to believe that you perceive the web they weave. Keep on being free!
Dear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 195 lines · In message <[email protected]> you wrote:
Hi,
Please pull
The following changes since commit3aa8b68d80dbcb6829af60485c1e388b39af793d:
Wolfgang Denk (1):
Merge branch 'next' of ../nextare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbin Tonnerre (3):
at91sam9260/afeb9260: Fix SPI initialization Add support for the Calao SBC35-A9G20 board Support for the Calao TNY-A9260/TNY-A9G20 boardsFrederik Kriewitz (1):
Add support for the DevKit8000 boardIlko Iliev (1):
DM9000 init for pm9261Ilya Yanok (1):
imx27lite: add support for imx27lite board from LogicPDJean-Christophe PLAGNIOL-VILLARD (3):
omap: move TI's boards to board/ti/
arm: move Logicpd's boards to board/logicpd/
omap3: move the other boards to board/Prafulla Wadaskar (1):
arm: Kirkwood: add SYSRSTn Duration Counter SupportSimon Kagstrom (1):
Remove duplicateset_crMAINTAINERS | 11 + MAKEALL | 5 + Makefile | 47 +++- board/afeb9260/afeb9260.c | 2 +- board/atmel/at91sam9260ek/at91sam9260ek.c | 2 +- .../{imx31_litekit => calao/sbc35_a9g20}/Makefile | 16 +- board/calao/sbc35_a9g20/config.mk | 1 + board/calao/sbc35_a9g20/sbc35_a9g20.c | 197 +++++++++++++ board/calao/sbc35_a9g20/spi.c | 57 ++++ board/{imx31_litekit => calao/tny_a9260}/Makefile | 16 +- board/calao/tny_a9260/config.mk | 1 + .../zoom2/debug_board.c => calao/tny_a9260/spi.c} | 53 ++-- board/calao/tny_a9260/tny_a9260.c | 110 +++++++ board/{omap5912osk => logicpd/imx27lite}/Makefile | 6 +- board/logicpd/imx27lite/config.mk | 1 + board/logicpd/imx27lite/imx27lite.c | 73 +++++ board/logicpd/imx27lite/lowlevel_init.S | 170 +++++++++++ board/{ => logicpd}/imx31_litekit/Makefile | 0 board/{ => logicpd}/imx31_litekit/config.mk | 0 board/{ => logicpd}/imx31_litekit/imx31_litekit.c | 0 board/{ => logicpd}/imx31_litekit/lowlevel_init.S | 0 board/{omap3 => logicpd}/zoom1/Makefile | 0 board/{omap3 => logicpd}/zoom1/config.mk | 0 board/{omap3 => logicpd}/zoom1/zoom1.c | 0 board/{omap3 => logicpd}/zoom1/zoom1.h | 0 board/{omap3 => logicpd}/zoom2/Makefile | 0 board/{omap3 => logicpd}/zoom2/config.mk | 0 board/{omap3 => logicpd}/zoom2/debug_board.c | 0 board/{omap3 => logicpd}/zoom2/led.c | 0 board/{omap3 => logicpd}/zoom2/zoom2.c | 0 board/{omap3 => logicpd}/zoom2/zoom2.h | 0 board/{omap3 => logicpd}/zoom2/zoom2_serial.c | 0 board/{omap3 => logicpd}/zoom2/zoom2_serial.h | 0 board/{omap3 => }/overo/Makefile | 0 board/{omap3 => }/overo/config.mk | 0 board/{omap3 => }/overo/overo.c | 0 board/{omap3 => }/overo/overo.h | 0 board/{omap3 => }/pandora/Makefile | 0 board/{omap3 => }/pandora/config.mk | 0 board/{omap3 => }/pandora/pandora.c | 0 board/{omap3 => }/pandora/pandora.h | 0 board/ronetix/pm9261/pm9261.c | 7 + board/{omap3 => ti}/beagle/Makefile | 0 board/{omap3 => ti}/beagle/beagle.c | 0 board/{omap3 => ti}/beagle/beagle.h | 0 board/{omap3 => ti}/beagle/config.mk | 0 board/{omap3 => ti}/evm/Makefile | 0 board/{omap3 => ti}/evm/config.mk | 0 board/{omap3 => ti}/evm/evm.c | 0 board/{omap3 => ti}/evm/evm.h | 0 board/{ => ti}/omap1510inn/Makefile | 0 board/{ => ti}/omap1510inn/config.mk | 0 board/{ => ti}/omap1510inn/lowlevel_init.S | 0 board/{ => ti}/omap1510inn/omap1510innovator.c | 0 board/{ => ti}/omap1610inn/Makefile | 0 board/{ => ti}/omap1610inn/config.mk | 0 board/{ => ti}/omap1610inn/flash.c | 0 board/{ => ti}/omap1610inn/lowlevel_init.S | 0 board/{ => ti}/omap1610inn/omap1610innovator.c | 0 board/{ => ti}/omap2420h4/Makefile | 0 board/{ => ti}/omap2420h4/config.mk | 0 board/{ => ti}/omap2420h4/lowlevel_init.S | 0 board/{ => ti}/omap2420h4/mem.c | 0 board/{ => ti}/omap2420h4/omap2420h4.c | 0 board/{ => ti}/omap2420h4/sys_info.c | 0 board/{ => ti}/omap5912osk/Makefile | 0 board/{ => ti}/omap5912osk/config.mk | 0 board/{ => ti}/omap5912osk/lowlevel_init.S | 0 board/{ => ti}/omap5912osk/omap5912osk.c | 0 board/{ => ti}/omap730p2/Makefile | 0 board/{ => ti}/omap730p2/config.mk | 0 board/{ => ti}/omap730p2/flash.c | 0 board/{ => ti}/omap730p2/lowlevel_init.S | 0 board/{ => ti}/omap730p2/omap730p2.c | 0 board/{omap3/pandora => timll/devkit8000}/Makefile | 5 +- board/{omap3/beagle => timll/devkit8000}/config.mk | 6 +- .../beagle.c => timll/devkit8000/devkit8000.c} | 118 ++++---- .../beagle.h => timll/devkit8000/devkit8000.h} | 283 +++++++++---------- cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- cpu/arm926ejs/kirkwood/cpu.c | 75 +++++ cpu/arm926ejs/mx27/generic.c | 65 ++++ doc/README.timll | 15 + include/asm-arm/arch-kirkwood/cpu.h | 2 + include/asm-arm/arch-mx27/imx-regs.h | 12 + include/asm-arm/proc-armv/system.h | 30 -- include/configs/devkit8000.h | 307 ++++++++++++++++++++ include/configs/imx27lite.h | 252 ++++++++++++++++ include/configs/sbc35_a9g20.h | 194 ++++++++++++ include/configs/tny_a9260.h | 172 +++++++++++ 89 files changed, 2007 insertions(+), 306 deletions(-) copy board/{imx31_litekit => calao/sbc35_a9g20}/Makefile (78%) create mode 100644 board/calao/sbc35_a9g20/config.mk create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c create mode 100644 board/calao/sbc35_a9g20/spi.c copy board/{imx31_litekit => calao/tny_a9260}/Makefile (78%) create mode 100644 board/calao/tny_a9260/config.mk copy board/{omap3/zoom2/debug_board.c => calao/tny_a9260/spi.c} (50%) create mode 100644 board/calao/tny_a9260/tny_a9260.c copy board/{omap5912osk => logicpd/imx27lite}/Makefile (94%) create mode 100644 board/logicpd/imx27lite/config.mk create mode 100644 board/logicpd/imx27lite/imx27lite.c create mode 100644 board/logicpd/imx27lite/lowlevel_init.S rename board/{ => logicpd}/imx31_litekit/Makefile (100%) rename board/{ => logicpd}/imx31_litekit/config.mk (100%) rename board/{ => logicpd}/imx31_litekit/imx31_litekit.c (100%) rename board/{ => logicpd}/imx31_litekit/lowlevel_init.S (100%) rename board/{omap3 => logicpd}/zoom1/Makefile (100%) rename board/{omap3 => logicpd}/zoom1/config.mk (100%) rename board/{omap3 => logicpd}/zoom1/zoom1.c (100%) rename board/{omap3 => logicpd}/zoom1/zoom1.h (100%) rename board/{omap3 => logicpd}/zoom2/Makefile (100%) rename board/{omap3 => logicpd}/zoom2/config.mk (100%) rename board/{omap3 => logicpd}/zoom2/debug_board.c (100%) rename board/{omap3 => logicpd}/zoom2/led.c (100%) rename board/{omap3 => logicpd}/zoom2/zoom2.c (100%) rename board/{omap3 => logicpd}/zoom2/zoom2.h (100%) rename board/{omap3 => logicpd}/zoom2/zoom2_serial.c (100%) rename board/{omap3 => logicpd}/zoom2/zoom2_serial.h (100%) rename board/{omap3 => }/overo/Makefile (100%) rename board/{omap3 => }/overo/config.mk (100%) rename board/{omap3 => }/overo/overo.c (100%) rename board/{omap3 => }/overo/overo.h (100%) copy board/{omap3 => }/pandora/Makefile (100%) rename board/{omap3 => }/pandora/config.mk (100%) rename board/{omap3 => }/pandora/pandora.c (100%) rename board/{omap3 => }/pandora/pandora.h (100%) rename board/{omap3 => ti}/beagle/Makefile (100%) copy board/{omap3 => ti}/beagle/beagle.c (100%) copy board/{omap3 => ti}/beagle/beagle.h (100%) copy board/{omap3 => ti}/beagle/config.mk (100%) rename board/{omap3 => ti}/evm/Makefile (100%) rename board/{omap3 => ti}/evm/config.mk (100%) rename board/{omap3 => ti}/evm/evm.c (100%) rename board/{omap3 => ti}/evm/evm.h (100%) rename board/{ => ti}/omap1510inn/Makefile (100%) rename board/{ => ti}/omap1510inn/config.mk (100%) rename board/{ => ti}/omap1510inn/lowlevel_init.S (100%) rename board/{ => ti}/omap1510inn/omap1510innovator.c (100%) rename board/{ => ti}/omap1610inn/Makefile (100%) rename board/{ => ti}/omap1610inn/config.mk (100%) rename board/{ => ti}/omap1610inn/flash.c (100%) rename board/{ => ti}/omap1610inn/lowlevel_init.S (100%) rename board/{ => ti}/omap1610inn/omap1610innovator.c (100%) rename board/{ => ti}/omap2420h4/Makefile (100%) rename board/{ => ti}/omap2420h4/config.mk (100%) rename board/{ => ti}/omap2420h4/lowlevel_init.S (100%) rename board/{ => ti}/omap2420h4/mem.c (100%) rename board/{ => ti}/omap2420h4/omap2420h4.c (100%) rename board/{ => ti}/omap2420h4/sys_info.c (100%) rename board/{ => ti}/omap5912osk/Makefile (100%) rename board/{ => ti}/omap5912osk/config.mk (100%) rename board/{ => ti}/omap5912osk/lowlevel_init.S (100%) rename board/{ => ti}/omap5912osk/omap5912osk.c (100%) rename board/{ => ti}/omap730p2/Makefile (100%) rename board/{ => ti}/omap730p2/config.mk (100%) rename board/{ => ti}/omap730p2/flash.c (100%) rename board/{ => ti}/omap730p2/lowlevel_init.S (100%) rename board/{ => ti}/omap730p2/omap730p2.c (100%) rename board/{omap3/pandora => timll/devkit8000}/Makefile (93%)
Quoted 8 lines
rename board/{omap3/beagle => timll/devkit8000}/config.mk (90%)
rename board/{omap3/beagle/beagle.c => timll/devkit8000/devkit8000.c} (53%)
rename board/{omap3/beagle/beagle.h => timll/devkit8000/devkit8000.h} (62%)
create mode 100644 doc/README.timll
create mode 100644 include/configs/devkit8000.h
create mode 100644 include/configs/imx27lite.h
create mode 100644 include/configs/sbc35_a9g20.h
create mode 100644 include/configs/tny_a9260.hAppleid, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Little known fact about Middle Earth: The Hobbits had a very sophi- sticated computer network! It was a Tolkien Ring...