Skip to contentSkip to conversation

Missing device ID in p54usb driver

PATCH In review Jari Jaakola 3 participants 3 messages Sep 14, 2009 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

Hello!

Device ID "0cde:0015" is missing from driver "p54usb". This usb wlan stick is Z-Com XG-705A, it seems to work ok after I added device id in driver, builded and installed it. I used compat-wireless-2.6.30.

Regards,
Jari

PS. Below is lsusb -v

Bus 002 Device 006: ID 0cde:0015 Z-Com Zoom Wireless-G Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0cde Z-Com
  idProduct          0x0015 Zoom Wireless-G
  bcdDevice            1.00
  iManufacturer           1 Conexant
  iProduct                2 Cohiba 3887a rev1
  iSerial                 3 3887-0100
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

#1 lore raw

PATCH 1/1 p54usb: add Zcomax XG-705A usbid

This patch adds a new usbid for Zcomax XG-705A to the device table.

---

drivers/net/wireless/p54/p54usb.c +1 -0
index e44460f..17e1995 100644
@@ -67,6 +67,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x0bf8, 0x1009)},   /* FUJITSU E-5400 USB D1700*/
 	{USB_DEVICE(0x0cde, 0x0006)},   /* Medion MD40900 */
 	{USB_DEVICE(0x0cde, 0x0008)},	/* Sagem XG703A */
+	{USB_DEVICE(0x0cde, 0x0015)},	/* Zcomax XG-705A */
 	{USB_DEVICE(0x0d8e, 0x3762)},	/* DLink DWL-G120 Cohiba */
 	{USB_DEVICE(0x124a, 0x4025)},	/* IOGear GWU513 (GW3887IK chip) */
 	{USB_DEVICE(0x1260, 0xee22)},	/* SMC 2862W-G version 2 */
#2 lore raw

Re: [PATCH] p54usb: add Zcomax XG-705A usbid

Quoted 11 lines · Christian Lamparter

This patch adds a new usbid for Zcomax XG-705A to the device table.

---

drivers/net/wireless/p54/p54usb.c +0 -0
index e44460f..17e1995 100644

drivers/net/wireless/p54/p54usb.c static struct usb_device_id p54u_table[] __devinitdata = {

Quoted 8 lines
drivers/net/wireless/p54/p54usb.c +1 -1
@@ -67,6 +67,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x0bf8, 0x1009)},   /* FUJITSU E-5400 USB D1700*/
 	{USB_DEVICE(0x0cde, 0x0006)},   /* Medion MD40900 */
 	{USB_DEVICE(0x0cde, 0x0008)},	/* Sagem XG703A */
+	{USB_DEVICE(0x0cde, 0x0015)},	/* Zcomax XG-705A */
 	{USB_DEVICE(0x0d8e, 0x3762)},	/* DLink DWL-G120 Cohiba */
 	{USB_DEVICE(0x124a, 0x4025)},	/* IOGear GWU513 (GW3887IK chip) */
 	{USB_DEVICE(0x1260, 0xee22)},	/* SMC 2862W-G version 2 */
--

ack