Missing device ID in p54usb driver
Hello!
Device ID "0cde:0015" is missing from driver "p54usb". This usb wlan stick is Z-Com XG-705A, it seems to work ok after I added device id in driver, builded and installed it. I used compat-wireless-2.6.30.
Regards,
Jari
PS. Below is lsusb -v
Bus 002 Device 006: ID 0cde:0015 Z-Com Zoom Wireless-G Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cde Z-Com idProduct 0x0015 Zoom Wireless-G bcdDevice 1.00 iManufacturer 1 Conexant iProduct 2 Cohiba 3887a rev1 iSerial 3 3887-0100 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
PATCH 1/1 p54usb: add Zcomax XG-705A usbid
This patch adds a new usbid for Zcomax XG-705A to the device table.
---
drivers/net/wireless/p54/p54usb.c +1 -0
@@ -67,6 +67,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */ {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ + {USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */ {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */
Re: [PATCH] p54usb: add Zcomax XG-705A usbid
Quoted 11 lines · Christian Lamparter
This patch adds a new usbid for Zcomax XG-705A to the device table.
Reported-by Jari Jaakola <[email protected]>Signed-off-by Christian Lamparter <[email protected]>---
drivers/net/wireless/p54/p54usb.c +0
-0
drivers/net/wireless/p54/p54usb.c static struct usb_device_id p54u_table[] __devinitdata = {
Quoted 8 lines
drivers/net/wireless/p54/p54usb.c +1
-1@@ -67,6 +67,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */ {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ + {USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */ {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */ --
ack