coretemp: Add Lynnfield CPU
Subsystems (2)
PATCH 1/1 coretemp: Add Lynnfield CPU
Add Lynnfield processor support. Lynnfield is a quad-core Nehalem based microprocessor for Desktop market, which is introduced in September 2009.
--- drivers/hwmon/coretemp.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/hwmon/coretemp.c +2 -2
@@ -413,11 +413,11 @@ static int __init coretemp_init(void)for_each_online_cpu (i) {struct cpuinfo_x86 *c = &cpu_data (i); -/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */ +/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A, 0x1E */ if ((c->cpuid_level <0 ) || (c->x86 !=0x6 ) || !((c->x86_model =0xe ) || (c->x86_model =0xf ) || (c->x86_model =0x16 ) || (c->x86_model =0x17 ) || - (c->x86_model =0x1A ))) { + (c->x86_model =0x1A ) || (c->x86_model =0x1E ))) {/* supported CPU not found, but report the unknown family 6 CPU */
--
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi,
Looks good. However I would like to see the Documentation/hwmon/coretemp updated too.
Maybe Intel can overtake the driver maintainership because I'm quite struggling to get any info from Intel. Second reason is lack of free time.
Thank you,
Rudolf
Huaxu Wan napsal(a):
Quoted 17 lines
Add Lynnfield processor support. Lynnfield is a quad-core Nehalem based microprocessor for Desktop market, which is introduced in September 2009.
Signed-off-by Huaxu Wan <[email protected]>Signed-off-by Kent Liu <[email protected]>--- drivers/hwmon/coretemp.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/coretemp.c +0
-1@@ -413,11 +413,11 @@ static int __init coretemp_init(void)for_each_online_cpu (i) {struct cpuinfo_x86 *c = &cpu_data (i); -/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
drivers/hwmon/coretemp.c static int __init coretemp_init(void)
Quoted 10 lines
drivers/hwmon/coretemp.c +2
-2+/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A, 0x1E */ if ((c->cpuid_level <0 ) || (c->x86 !=0x6 ) || !((c->x86_model =0xe ) || (c->x86_model =0xf ) || (c->x86_model =0x16 ) || (c->x86_model =0x17 ) || - (c->x86_model =0x1A ))) { + (c->x86_model =0x1A ) || (c->x86_model =0x1E ))) {/* supported CPU not found, but report the unknown family 6 CPU */ --
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 5 lines · Jean Delvare
Quoted 2 lines · Rudolf Marek
Looks good. However I would like to see the
Documentation/hwmon/coretempupdated too.I'll take care of that.
Thanks Jean.
Quoted 5 lines
Quoted 3 lines
Maybe Intel can overtake the driver maintainership because I'm quite struggling to get any info from Intel. Second reason is lack of free time.
Huaxu, Kent, can you please comment on this?
Hmmm... I am looking for an Intel internal support for this maintainership, since I usually not receive such documents either. I would like to take once this can be resolved.
Quoted 5 lines
Quoted 3 lines
Huaxu Wan napsal(a):
Quoted 1 line
Add Lynnfield processor support. Lynnfield is a quad-core Nehalem based microprocessor for Desktop market, which is introduced in September 2009.
What are the TjMax and TTarget temperatures for these CPUs?
So far I do not find them in datasheet. Let me check what I can find more.
Thanks,
Kent
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hello Rudolf
Yes. I think Huaxu and I can take this, even though I am still on the way to acquire enough documents from hardware team. As I have a lot of processors on hand to test, maybe it's better to gain more coverage in coretemp driver.
Please let me know what I need to do regarding to take the maintainership. We are not experienced in doing so.
Thanks,
Kent
Quoted 38 lines · Rudolf Marek
Hi,
Looks good. However I would like to see the
Documentation/hwmon/coretempupdated too.Maybe Intel can overtake the driver maintainership because I'm quite struggling to get any info from Intel. Second reason is lack of free time.
Thank you,
Rudolf
Huaxu Wan napsal(a):
Quoted 24 lines
Add Lynnfield processor support. Lynnfield is a quad-core Nehalem based microprocessor for Desktop market, which is introduced in September 2009.
Signed-off-by Huaxu Wan <[email protected]>Signed-off-by Kent Liu <[email protected]>--- drivers/hwmon/coretemp.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/coretemp.c +2
-2@@ -413,11 +413,11 @@ static int __init coretemp_init(void)for_each_online_cpu (i) {struct cpuinfo_x86 *c = &cpu_data (i); -/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */ +/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A, 0x1E */ if ((c->cpuid_level <0 ) || (c->x86 !=0x6 ) || !((c->x86_model =0xe ) || (c->x86_model =0xf ) || (c->x86_model =0x16 ) || (c->x86_model =0x17 ) || - (c->x86_model =0x1A ))) { + (c->x86_model =0x1A ) || (c->x86_model =0x1E ))) {
Quoted 4 lines
drivers/hwmon/coretemp.c static int __init coretemp_init(void)
Quoted 3 lines
drivers/hwmon/coretemp.c +0
-1/* supported CPU not found, but report the unknown family 6 CPU */ --
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi Kent,
Quoted 6 lines · Kent Liu
Yes. I think Huaxu and I can take this, even though I am still on the way to acquire enough documents from hardware team. As I have a lot of processors on hand to test, maybe it's better to gain more coverage in coretemp driver.
Please let me know what I need to do regarding to take the maintainership. We are not experienced in doing so.
Simply send us a patch updating the "CORETEMP HARDWARE MONITORING DRIVER" entry in file MAINTAINERS. Set the M: field to the new maintainer (format is "name <address>"). You can have several M: fields if there will be several maintainers. And that's all :)
Once we receive the patch, I'll pick it and push it upstream in a timely manner.
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Kent,
Quoted 2 lines
Please let me know what I need to do regarding to take the maintainership. We are not experienced in doing so.
Yes thats it what Jean said to you. Many thanks for this!
Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkrTl88ACgkQ3J9wPJqZRNV2hwCgopnemKT4J5dBmiir3Q8qjGhu vP0AniGrMsD+aZRAzcubADm4wINHLT23
=Vukl
-----END PGP SIGNATURE-----
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors