omap_hsmmc: cater for weird CMD6 behaviour
Subsystems (2)
PATCH 67/232 omap_hsmmc: cater for weird CMD6 behaviour
From: Adrian Hunter <[email protected]>
Sometimes the controller unexpectedly produces a TC (transfer complete) interrupt before the CC (command complete) interrupt for command 6 (SWITCH). This is a problem because the CC interrupt can get mixed up with the next request. Add a hack for CMD6.
Signed-off-by Adrian Hunter <[email protected]>
Acked-by Matt Fleming <[email protected]>
Cc Ian Molton <[email protected]>
Cc "Roberto A. Foglietta" <[email protected]>
Cc Jarkko Lavinen <[email protected]>
Cc Denis Karpov <[email protected]>
Cc Pierre Ossman <[email protected]>
Cc Philip Langdale <[email protected]>
Cc "Madhusudhan" <[email protected]>
Cc <[email protected]>
Signed-off-by Andrew Morton <[email protected]>
---
drivers/mmc/host/omap_hsmmc.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/mmc/host/omap_hsmmc.c renamed from drivers/mmc/host/omap_hsmmc.c~omap_hsmmc-cater-for-weird-cmd6-behaviour +7 -0
@@ -481,6 +481,13 @@ mmc_omap_xfer_done(struct mmc_omap_hostif (!data) {struct mmc_request *mrq = host->mrq; +/* TC before CC from CMD6 - don't know why, but it happens */ +if (host->cmd && host->cmd->opcode ==6 && + host->response_busy) { + host->response_busy =0 ; +return ; + } + host->mrq =NULL ;mmc_request_done (host->mmc, mrq);return ;
_