Skip to contentSkip to conversation

omap_hsmmc: cater for weird CMD6 behaviour

PATCH In review [email protected] 1 participant 1 message Sep 23, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 67/232 omap_hsmmc: cater for weird CMD6 behaviour

From: Adrian Hunter <[email protected]>

Sometimes the controller unexpectedly produces a TC (transfer complete) interrupt before the CC (command complete) interrupt for command 6 (SWITCH). This is a problem because the CC interrupt can get mixed up with the next request. Add a hack for CMD6.

Cc Ian Molton <[email protected]>
Cc "Roberto A. Foglietta" <[email protected]>
Cc Jarkko Lavinen <[email protected]>
Cc Denis Karpov <[email protected]>
Cc Pierre Ossman <[email protected]>
Cc Philip Langdale <[email protected]>
Cc "Madhusudhan" <[email protected]>

---

 drivers/mmc/host/omap_hsmmc.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/mmc/host/omap_hsmmc.c renamed from drivers/mmc/host/omap_hsmmc.c~omap_hsmmc-cater-for-weird-cmd6-behaviour +7 -0
diff -puN drivers/mmc/host/omap_hsmmc.c~omap_hsmmc-cater-for-weird-cmd6-behaviour drivers/mmc/host/omap_hsmmc.c
@@ -481,6 +481,13 @@ mmc_omap_xfer_done(struct mmc_omap_host 
 	if (!data) {
 		struct mmc_request *mrq = host->mrq;
 
+		/* TC before CC from CMD6 - don't know why, but it happens */
+		if (host->cmd && host->cmd->opcode == 6 &&
+		    host->response_busy) {
+			host->response_busy = 0;
+			return;
+		}
+
 		host->mrq = NULL;
 		mmc_request_done(host->mmc, mrq);
 		return;

_