Skip to contentSkip to conversation

Please pull u-boot-mpc83xx.git

U-Boot Applied Kim Phillips 2 participants 4 messages Sep 25, 2009 – Sep 30, 2009

lore
Share & tools
lore
#0 lore raw

Hi WD,

Please pull some minor enhancements for 83xx:

The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):

        mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]

are available in the git repository at:

git://git.denx.de/u-boot-mpc83xx.git master

Anton Vorontsov (5):
net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fix uccf.h and uec.h headers to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixups

Paul Gortmaker (1):
sbc8349: tidy up Makefile to use new configuration script.

 Makefile                                  |   15 +------
 board/freescale/mpc8360emds/mpc8360emds.c |   73 ++++++++++++++++++++++++++---
 drivers/qe/uccf.h                         |    1 +
 drivers/qe/uec.h                          |    4 ++
 drivers/qe/uec_phy.c                      |   15 +++++-
 include/configs/MPC8360EMDS.h             |    6 ++-
 include/configs/sbc8349.h                 |   15 ++++++
 7 files changed, 104 insertions(+), 25 deletions(-)

I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.

Thanks,

Kim

#1 lore raw
Quoted 3 lines · On Fri, 25 Sep 2009 18:39:46 -0500 Kim Phillips <[email protected]>…

I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.

At least Heiko commented on it, and I fixed and tested it ok, so please now pull:

The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):

        mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]

are available in the git repository at:

git://git.denx.de/u-boot-mpc83xx.git master

Anton Vorontsov (5):
net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fix uccf.h and uec.h headers to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixups

Kim Phillips (1):
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields

Paul Gortmaker (1):
sbc8349: tidy up Makefile to use new configuration script.

 Makefile                                  |   15 +--
 board/freescale/mpc8360emds/mpc8360emds.c |   73 ++++++++-
 cpu/mpc83xx/cpu_init.c                    |  261 +++++++++++++++++------------
 drivers/qe/uccf.h                         |    1 +
 drivers/qe/uec.h                          |    4 +
 drivers/qe/uec_phy.c                      |   15 ++-
 include/configs/MPC8313ERDB.h             |    3 +-
 include/configs/MPC8315ERDB.h             |    3 +-
 include/configs/MPC8323ERDB.h             |    3 +-
 include/configs/MPC832XEMDS.h             |    3 +-
 include/configs/MPC8349EMDS.h             |    3 +-
 include/configs/MPC8349ITX.h              |    3 +-
 include/configs/MPC8360EMDS.h             |    9 +-
 include/configs/MPC8360ERDK.h             |    3 +-
 include/configs/MPC837XEMDS.h             |    3 +-
 include/configs/MPC837XERDB.h             |    3 +-
 include/configs/MVBLM7.h                  |    3 +-
 include/configs/SIMPC8313.h               |    4 +-
 include/configs/TQM834x.h                 |    3 +-
 include/configs/kmeter1.h                 |    4 +-
 include/configs/sbc8349.h                 |   18 ++-
 include/configs/vme8349.h                 |    3 +-
 22 files changed, 292 insertions(+), 148 deletions(-)

Thanks,

Kim

#2 lore raw

Dear Kim Phillips,

Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 3 lines · On Fri, 25 Sep 2009 18:39:46 -0500 Kim Phillips <[email protected]>…

I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.

At least Heiko commented on it, and I fixed and tested it ok, so please now pull:

OK.

Quoted 36 lines

The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):

        mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]

are available in the git repository at:

git://git.denx.de/u-boot-mpc83xx.git master

Anton Vorontsov (5):
net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fix uccf.h and uec.h headers to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixups

Kim Phillips (1):
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields

Paul Gortmaker (1):
sbc8349: tidy up Makefile to use new configuration script.

 Makefile                                  |   15 +--
 board/freescale/mpc8360emds/mpc8360emds.c |   73 ++++++++-
 cpu/mpc83xx/cpu_init.c                    |  261 +++++++++++++++++------------
 drivers/qe/uccf.h                         |    1 +
 drivers/qe/uec.h                          |    4 +
 drivers/qe/uec_phy.c                      |   15 ++-
 include/configs/MPC8313ERDB.h             |    3 +-
 include/configs/MPC8315ERDB.h             |    3 +-
 include/configs/MPC8323ERDB.h             |    3 +-
 include/configs/MPC832XEMDS.h             |    3 +-
 include/configs/MPC8349EMDS.h             |    3 +-
 include/configs/MPC8349ITX.h              |    3 +-
 include/configs/MPC8360EMDS.h             |    9 +-
 include/configs/MPC8360ERDK.h             |    3 +-
 include/configs/MPC837XEMDS.h             |    3 +-
Quoted 8 lines
 include/configs/MPC837XERDB.h             |    3 +-
 include/configs/MVBLM7.h                  |    3 +-
 include/configs/SIMPC8313.h               |    4 +-
 include/configs/TQM834x.h                 |    3 +-
 include/configs/kmeter1.h                 |    4 +-
 include/configs/sbc8349.h                 |   18 ++-
 include/configs/vme8349.h                 |    3 +-
 22 files changed, 292 insertions(+), 148 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
...the increased productivity fostered by a friendly environment  and
quality  tools  is  essential  to  meet  ever  increasing demands for
software.               - M. D. McIlroy, E. N. Pinson and B. A. Tague
#3 lore raw
In reply to Kim Phillips

Dear Kim Phillips,

Quoted 22 lines · In message <[email protected]> you wrote:

Hi WD,

Please pull some minor enhancements for 83xx:

The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):

        mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]

are available in the git repository at:

git://git.denx.de/u-boot-mpc83xx.git master

Anton Vorontsov (5):
net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fix uccf.h and uec.h headers to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixups

Paul Gortmaker (1):
sbc8349: tidy up Makefile to use new configuration script.

Quoted 8 lines
 Makefile                                  |   15 +------
 board/freescale/mpc8360emds/mpc8360emds.c |   73 ++++++++++++++++++++++++++---
 drivers/qe/uccf.h                         |    1 +
 drivers/qe/uec.h                          |    4 ++
 drivers/qe/uec_phy.c                      |   15 +++++-
 include/configs/MPC8360EMDS.h             |    6 ++-
 include/configs/sbc8349.h                 |   15 ++++++
 7 files changed, 104 insertions(+), 25 deletions(-)

Applied, thanks.

Quoted 3 lines

I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.

OK, apply when you feel it's OK.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Who alone has reason to *lie  himself  out*  of  actuality?  He  who
*suffers* from it."                             - Friedrich Nietzsche