Please pull u-boot-mpc83xx.git
Hi WD,
Please pull some minor enhancements for 83xx:
The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):
mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]
are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.git master
Anton Vorontsov (5):
net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fix uccf.h and uec.h headers to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixups
Paul Gortmaker (1):
sbc8349: tidy up Makefile to use new configuration script.
Makefile | 15 +------ board/freescale/mpc8360emds/mpc8360emds.c | 73 ++++++++++++++++++++++++++--- drivers/qe/uccf.h | 1 + drivers/qe/uec.h | 4 ++ drivers/qe/uec_phy.c | 15 +++++- include/configs/MPC8360EMDS.h | 6 ++- include/configs/sbc8349.h | 15 ++++++ 7 files changed, 104 insertions(+), 25 deletions(-)
I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.
Thanks,
Kim
Quoted 3 lines · On Fri, 25 Sep 2009 18:39:46 -0500 Kim Phillips <[email protected]>…
I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.
At least Heiko commented on it, and I fixed and tested it ok, so please now pull:
The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):
mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]
are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.git master
Anton Vorontsov (5):
net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fix uccf.h and uec.h headers to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixups
Kim Phillips (1):
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
Paul Gortmaker (1):
sbc8349: tidy up Makefile to use new configuration script.
Makefile | 15 +-- board/freescale/mpc8360emds/mpc8360emds.c | 73 ++++++++- cpu/mpc83xx/cpu_init.c | 261 +++++++++++++++++------------ drivers/qe/uccf.h | 1 + drivers/qe/uec.h | 4 + drivers/qe/uec_phy.c | 15 ++- include/configs/MPC8313ERDB.h | 3 +- include/configs/MPC8315ERDB.h | 3 +- include/configs/MPC8323ERDB.h | 3 +- include/configs/MPC832XEMDS.h | 3 +- include/configs/MPC8349EMDS.h | 3 +- include/configs/MPC8349ITX.h | 3 +- include/configs/MPC8360EMDS.h | 9 +- include/configs/MPC8360ERDK.h | 3 +- include/configs/MPC837XEMDS.h | 3 +- include/configs/MPC837XERDB.h | 3 +- include/configs/MVBLM7.h | 3 +- include/configs/SIMPC8313.h | 4 +- include/configs/TQM834x.h | 3 +- include/configs/kmeter1.h | 4 +- include/configs/sbc8349.h | 18 ++- include/configs/vme8349.h | 3 +- 22 files changed, 292 insertions(+), 148 deletions(-)
Thanks,
Kim
Wolfgang Denk
AppliedDear Kim Phillips,
Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 3 lines · On Fri, 25 Sep 2009 18:39:46 -0500 Kim Phillips <[email protected]>…
I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.
At least Heiko commented on it, and I fixed and tested it ok, so please now pull:
OK.
Quoted 36 lines
The following changes since commit
984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.gitmasterAnton Vorontsov (5):
net:uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fixuccf.handuec.hheaders to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixupsKim Phillips (1):
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfieldsPaul Gortmaker (1):
sbc8349: tidy upMakefileto use new configuration script.Makefile | 15 +-- board/freescale/mpc8360emds/mpc8360emds.c | 73 ++++++++- cpu/mpc83xx/cpu_init.c | 261 +++++++++++++++++------------ drivers/qe/uccf.h | 1 + drivers/qe/uec.h | 4 + drivers/qe/uec_phy.c | 15 ++- include/configs/MPC8313ERDB.h | 3 +- include/configs/MPC8315ERDB.h | 3 +- include/configs/MPC8323ERDB.h | 3 +- include/configs/MPC832XEMDS.h | 3 +- include/configs/MPC8349EMDS.h | 3 +- include/configs/MPC8349ITX.h | 3 +- include/configs/MPC8360EMDS.h | 9 +- include/configs/MPC8360ERDK.h | 3 +- include/configs/MPC837XEMDS.h | 3 +-
Quoted 8 lines
include/configs/MPC837XERDB.h | 3 +- include/configs/MVBLM7.h | 3 +- include/configs/SIMPC8313.h | 4 +- include/configs/TQM834x.h | 3 +- include/configs/kmeter1.h | 4 +- include/configs/sbc8349.h | 18 ++- include/configs/vme8349.h | 3 +- 22 files changed, 292 insertions(+), 148 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de ...the increased productivity fostered by a friendly environment and quality tools is essential to meet ever increasing demands for software. - M. D. McIlroy, E. N. Pinson and B. A. Tague
Wolfgang Denk
AppliedDear Kim Phillips,
Quoted 22 lines · In message <[email protected]> you wrote:
Hi WD,
Please pull some minor enhancements for 83xx:
The following changes since commit
984f10baac8ef6032df52f135943d6b0bc96f724:
Wolfgang Denk (1):mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.gitmasterAnton Vorontsov (5):
net:uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
net: uec: Fixuccf.handuec.hheaders to include headers they depend on
mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
mpc83xx: mpc8360emds: Add QE USB device tree fixupsPaul Gortmaker (1):
sbc8349: tidy upMakefileto use new configuration script.
Quoted 8 lines
Makefile | 15 +------ board/freescale/mpc8360emds/mpc8360emds.c | 73 ++++++++++++++++++++++++++--- drivers/qe/uccf.h | 1 + drivers/qe/uec.h | 4 ++ drivers/qe/uec_phy.c | 15 +++++- include/configs/MPC8360EMDS.h | 6 ++- include/configs/sbc8349.h | 15 ++++++ 7 files changed, 104 insertions(+), 25 deletions(-)
Applied, thanks.
Quoted 3 lines
I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.
OK, apply when you feel it's OK.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Who alone has reason to *lie himself out* of actuality? He who *suffers* from it." - Friedrich Nietzsche