ixgbe: add support for 82599 Combined Backplane
Subsystems (2)
PATCH 1/2 ixgbe: add support for 82599 Combined Backplane
From: Don Skidmore <[email protected]>
This patch will add support for the 82599 Dual port Backplane device (0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis.
---
drivers/net/ixgbe/ixgbe_82599.c | 1 + drivers/net/ixgbe/ixgbe_main.c | 2 ++ drivers/net/ixgbe/ixgbe_type.h | 1 + 3 files changed, 4 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe_82599.c +1 -0
@@ -330,6 +330,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)switch (hw->device_id) {case IXGBE_DEV_ID_82599_KX4 : +case IXGBE_DEV_ID_82599_COMBO_BACKPLANE :case IXGBE_DEV_ID_82599_XAUI_LOM :/* Default device ID is mezzanine card KX/KX4 */ media_type = ixgbe_media_type_backplane;
drivers/net/ixgbe/ixgbe_main.c +2 -0
@@ -99,6 +99,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = { board_82599 }, {PCI_VDEVICE (INTEL ,IXGBE_DEV_ID_82599_CX4 ), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), + board_82599 },/* required last entry */ {0, }
drivers/net/ixgbe/ixgbe_type.h +1 -0
@@ -52,6 +52,7 @@#define IXGBE_DEV_ID_82599_CX4 0x10F9#define IXGBE_DEV_ID_82599_SFP 0x10FB#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC +#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8/* General Registers */ #define IXGBE_CTRL 0x00000
PATCH 2/2 ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz card
From: Don Skidmore <[email protected]>
This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card.
---
drivers/net/ixgbe/ixgbe_82599.c | 1 + drivers/net/ixgbe/ixgbe_main.c | 2 ++ drivers/net/ixgbe/ixgbe_type.h | 1 + 3 files changed, 4 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe_82599.c +1 -0
@@ -330,6 +330,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)switch (hw->device_id) {case IXGBE_DEV_ID_82599_KX4 : +case IXGBE_DEV_ID_82599_KX4_MEZZ :case IXGBE_DEV_ID_82599_COMBO_BACKPLANE :case IXGBE_DEV_ID_82599_XAUI_LOM :/* Default device ID is mezzanine card KX/KX4 */
drivers/net/ixgbe/ixgbe_main.c +2 -0
@@ -97,6 +97,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = { board_82599 }, {PCI_VDEVICE (INTEL ,IXGBE_DEV_ID_82599_SFP ), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), + board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
drivers/net/ixgbe/ixgbe_type.h +1 -0
@@ -49,6 +49,7 @@#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4#define IXGBE_DEV_ID_82599_KX4 0x10F7 +#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514#define IXGBE_DEV_ID_82599_CX4 0x10F9#define IXGBE_DEV_ID_82599_SFP 0x10FB#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
Re: [net-2.6 PATCH 2/2] ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz card
From: Jeff Kirsher <[email protected]>
Date: Fri, 02 Oct 2009 11:58:25 -0700
Quoted 8 lines
From: Don Skidmore <[email protected]>
This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card.
Signed-off-by Don Skidmore<[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied.
From: Jeff Kirsher <[email protected]>
Date: Fri, 02 Oct 2009 11:58:04 -0700
Quoted 8 lines
This patch will add support for the 82599 Dual port Backplane device (
0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis.Signed-off-by Don Skidmore <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied.