Skip to contentSkip to conversation

ixgbe: add support for 82599 Combined Backplane

PATCH Applied Jeff Kirsher 2 participants 4 messages Oct 2, 2009 – Oct 5, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ixgbe: add support for 82599 Combined Backplane

From: Don Skidmore <[email protected]>

This patch will add support for the 82599 Dual port Backplane device (0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis.

---

 drivers/net/ixgbe/ixgbe_82599.c |    1 +
 drivers/net/ixgbe/ixgbe_main.c  |    2 ++
 drivers/net/ixgbe/ixgbe_type.h  |    1 +
 3 files changed, 4 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe_82599.c +1 -0
index 2ec58dc..bb87c43 100644
@@ -330,6 +330,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
drivers/net/ixgbe/ixgbe_main.c +2 -0
index 1cbc6a3..dc4afa5 100644
@@ -99,6 +99,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
+	 board_82599 },
 
 	/* required last entry */
 	{0, }
drivers/net/ixgbe/ixgbe_type.h +1 -0
index 7c93e92..a71f712 100644
@@ -52,6 +52,7 @@
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
#1 lore raw

PATCH 2/2 ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz card

From: Don Skidmore <[email protected]>

This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card.

---

 drivers/net/ixgbe/ixgbe_82599.c |    1 +
 drivers/net/ixgbe/ixgbe_main.c  |    2 ++
 drivers/net/ixgbe/ixgbe_type.h  |    1 +
 3 files changed, 4 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe_82599.c +1 -0
index bb87c43..34b0492 100644
@@ -330,6 +330,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
 	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
drivers/net/ixgbe/ixgbe_main.c +2 -0
index dc4afa5..1a2eb79 100644
@@ -97,6 +97,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
drivers/net/ixgbe/ixgbe_type.h +1 -0
index a71f712..ef4bdd5 100644
@@ -49,6 +49,7 @@
 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
 #define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
 #define IXGBE_DEV_ID_82599_KX4           0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ      0x1514
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
maintainer Applied
#2 lore raw

Re: [net-2.6 PATCH 2/2] ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz card

From: Jeff Kirsher <[email protected]>
Date: Fri, 02 Oct 2009 11:58:25 -0700

Quoted 8 lines

From: Don Skidmore <[email protected]>

This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card.

Applied.

maintainer Applied
#3 lore raw
In reply to Jeff Kirsher

From: Jeff Kirsher <[email protected]>
Date: Fri, 02 Oct 2009 11:58:04 -0700

Quoted 8 lines

This patch will add support for the 82599 Dual port Backplane device (0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis.

Applied.