Problem with NetConsole
Hi,
I'm trying to add the NetConsole to my project.
I've set all the related environment variables
when i start UBoot and then type "run nc" i see that i receive the data i'm sending from remote PC,
but if i call "run nc" from within the UBoot, using run_command("run nc", 1);, i don't receive that data.
Am i doing something wrong?
Thanks,
Alex
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--Problem-with-NetConsole-tp25738669p25738669.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear alex889,
Quoted 10 lines · In message <[email protected]> you wrote:
I'm trying to add the NetConsole to my project.
I've set all the related environment variableswhen i start UBoot and then type "run nc" i see that i receive the data i'm sending from remote PC,
but if i call "run nc" from within the UBoot, usingrun_command("run nc", 1);, i don't receive that data.Am i doing something wrong?
Yes, that much is sure, as it doesn't work for you.
Since you don't provide any deyails of your code changes (like a patch against top-of-tree in mainline) we can only guess. My guess
is: You are missing a semicolon in line 42.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If the odds are a million to one against something occuring, chances are 50-50 it will.
OK
So let me rephrase myself
My aim is to open the NetConsole for input (stdin=nc)only if the user pressed on a specific button.
How should the code that opens the NetConsole look like, after i discovered the button was pressed?
Thanks,
Alex
Quoted 38 lines · wd
Dear alex889,
Quoted 11 lines · In message <[email protected]> you wrote:
I'm trying to add the NetConsole to my project.
I've set all the related environment variableswhen i start UBoot and then type "run nc" i see that i receive the data i'm
sending from remote PC,
but if i call "run nc" from within the UBoot, usingrun_command("run nc", 1);, i don't receive that data.Am i doing something wrong?
Yes, that much is sure, as it doesn't work for you.
Since you don't provide any deyails of your code changes (like a patch against top-of-tree in mainline) we can only guess. My guess
is: You are missing a semicolon in line 42.Best regards,
Wolfgang Denk
Signature · 9 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If the odds are a million to one against something occuring, chances are 50-50 it will. _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--Problem-with-NetConsole-tp25738669p25741672.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear alex889,
please do not top post / full quote. PLease make sure to read
http://www.netmeister.org/news/learn2quote.html
Quoted 6 lines · In message <[email protected]> you wrote:
So let me rephrase myself
My aim is to open the NetConsole for input (stdin=nc)only if the user pressed on a specific button.
How should the code that opens the NetConsole look like, after i discovered the button was pressed?
setenv("stdin", "nc");
Of course, you must make sure to run this only after device intialization.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are no data that cannot be plotted on a straight line if the axis are chosen correctly.
Thanks Wolfgang !
that helped,
the last question i have is: I want the NetConsole to listen for incoming messages for 2 sec,
I've tried using NetSetTimeout, but it seems to not work
Alex
Quoted 36 lines · wd
Dear alex889,
please do not top post / full quote. PLease make sure to read
http://www.netmeister.org/news/learn2quote.htmlQuoted 7 lines · In message <[email protected]> you wrote:
So let me rephrase myself
My aim is to open the NetConsole for input (stdin=nc)only if the user pressed on a specific button.
How should the code that opens the NetConsole look like, after i discovered
the button was pressed?
setenv("stdin", "nc");Of course, you must make sure to run this only after device intialization.
Best regards,
Wolfgang Denk
Signature · 9 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are no data that cannot be plotted on a straight line if the axis are chosen correctly. _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--Problem-with-NetConsole-tp25738669p25747772.html Sent from the Uboot - Users mailing list archive at Nabble.com.