Skip to contentSkip to conversation

Problem with NetConsole

U-Boot alex889 2 participants 5 messages Oct 4, 2009 – Oct 5, 2009

lore
Share & tools
lore

alex889

author
#0 lore raw

Hi,
I'm trying to add the NetConsole to my project.
I've set all the related environment variables

when i start UBoot and then type "run nc" i see that i receive the data i'm sending from remote PC,
but if i call "run nc" from within the UBoot, using run_command("run nc", 1);, i don't receive that data.

Am i doing something wrong?

Thanks,
Alex

Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--Problem-with-NetConsole-tp25738669p25738669.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw

Dear alex889,

Quoted 10 lines · In message <[email protected]> you wrote:

I'm trying to add the NetConsole to my project.
I've set all the related environment variables

when i start UBoot and then type "run nc" i see that i receive the data i'm sending from remote PC,
but if i call "run nc" from within the UBoot, using run_command("run nc", 1);, i don't receive that data.

Am i doing something wrong?

Yes, that much is sure, as it doesn't work for you.

Since you don't provide any deyails of your code changes (like a patch against top-of-tree in mainline) we can only guess. My guess
is: You are missing a semicolon in line 42.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If the odds are a million to one against something occuring,  chances
are 50-50 it will.
author
#2 lore raw

OK
So let me rephrase myself
My aim is to open the NetConsole for input (stdin=nc)only if the user pressed on a specific button.
How should the code that opens the NetConsole look like, after i discovered the button was pressed?

Thanks,
Alex

Quoted 38 lines · wd

Dear alex889,

Quoted 11 lines · In message <[email protected]> you wrote:

I'm trying to add the NetConsole to my project.
I've set all the related environment variables

when i start UBoot and then type "run nc" i see that i receive the data i'm
sending from remote PC,
but if i call "run nc" from within the UBoot, using run_command("run nc", 1);, i don't receive that data.

Am i doing something wrong?

Yes, that much is sure, as it doesn't work for you.

Since you don't provide any deyails of your code changes (like a patch against top-of-tree in mainline) we can only guess. My guess
is: You are missing a semicolon in line 42.

Best regards,

Wolfgang Denk

Signature · 9 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If the odds are a million to one against something occuring,  chances
are 50-50 it will.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--Problem-with-NetConsole-tp25738669p25741672.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#3 lore raw

Dear alex889,

please do not top post / full quote. PLease make sure to read
http://www.netmeister.org/news/learn2quote.html

Quoted 6 lines · In message <[email protected]> you wrote:

So let me rephrase myself
My aim is to open the NetConsole for input (stdin=nc)only if the user pressed on a specific button.
How should the code that opens the NetConsole look like, after i discovered the button was pressed?

setenv("stdin", "nc");

Of course, you must make sure to run this only after device intialization.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are no data that cannot be plotted on a straight  line  if  the
axis are chosen correctly.
author
#4 lore raw

Thanks Wolfgang !
that helped,
the last question i have is: I want the NetConsole to listen for incoming messages for 2 sec,
I've tried using NetSetTimeout, but it seems to not work

Alex

Quoted 36 lines · wd

Dear alex889,

please do not top post / full quote. PLease make sure to read
http://www.netmeister.org/news/learn2quote.html

Quoted 7 lines · In message <[email protected]> you wrote:

So let me rephrase myself
My aim is to open the NetConsole for input (stdin=nc)only if the user pressed on a specific button.
How should the code that opens the NetConsole look like, after i discovered
the button was pressed?

setenv("stdin", "nc");

Of course, you must make sure to run this only after device intialization.

Best regards,

Wolfgang Denk

Signature · 9 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are no data that cannot be plotted on a straight  line  if  the
axis are chosen correctly.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
View this message in context: http://www.nabble.com/-U-Boot--Problem-with-NetConsole-tp25738669p25747772.html
Sent from the Uboot - Users mailing list archive at Nabble.com.