Please pull u-boot-i2c.git next branch
The following changes since commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78:
Wolfgang Denk (1):
Prepare v2009.06-rc1
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git next
Peter Tyser (12):
i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value
cpci750: i2c cleanup
Marvell: i2c cleanup
mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
tsi108_i2c: Add i2c_init() stub function
cm5200: Make function test command names more unique
i2c: Create common default i2c_[set|get]_bus_speed() functions
i2c: Remove deprecated individual i2c commands
i2c: Update references to individual i2c commands
cmd_i2c: Clean up i2c command argument parsing
cmd_i2c: Clean up trivial helper functions
cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX
README | 20 +---- board/Marvell/common/i2c.c | 19 +++-- board/cm5200/cmd_cm5200.c | 18 ++-- board/esd/cpci750/i2c.c | 16 ++-- board/esd/tasreg/tasreg.c | 4 +- common/cmd_eeprom.c | 4 - common/cmd_i2c.c | 176 +++++++++++++------------------------- cpu/arm920t/at91rm9200/i2c.c | 10 -- cpu/mpc512x/i2c.c | 14 --- cpu/mpc8260/i2c.c | 16 ---- cpu/ppc4xx/40x_spd_sdram.c | 4 - cpu/ppc4xx/44x_spd_ddr.c | 4 - cpu/ppc4xx/i2c.c | 14 --- doc/README.ebony | 20 ++-- doc/README.m52277evb | 8 +-- doc/README.m5373evb | 8 +-- doc/README.m54455evb | 8 +-- doc/README.m5475evb | 8 +-- doc/README.ppc440 | 4 +- doc/README.xpedite1k | 6 +- doc/feature-removal-schedule.txt | 12 --- drivers/i2c/soft_i2c.c | 14 --- drivers/i2c/tsi108_i2c.c | 11 ++- include/configs/DU405.h | 1 - include/configs/DU440.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MVBLM7.h | 1 - include/configs/PMC440.h | 1 - include/configs/SIMPC8313.h | 1 - include/configs/XPEDITE5200.h | 1 - include/configs/XPEDITE5370.h | 1 - include/configs/ads5121.h | 1 - include/configs/at91rm9200ek.h | 1 - include/configs/bubinga.h | 2 +- include/configs/katmai.h | 1 - include/configs/keymile-common.h | 1 - include/configs/kmeter1.h | 1 - include/configs/korat.h | 1 - include/configs/mpc7448hpc2.h | 1 + include/configs/sacsng.h | 6 +- include/configs/sbc8349.h | 1 - include/configs/socrates.h | 1 - include/configs/taihu.h | 2 +- include/i2c.h | 12 ++- 51 files changed, 140 insertions(+), 324 deletions(-)
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedDear Heiko Schocher,
Quoted 66 lines · In message <[email protected]> you wrote:
The following changes since commit
6b8edfde22acc574b5532e9f086e6a7287a9bc78:
Wolfgang Denk (1):Prepare v2009.06-rc1are available in the git repository at:
git://git.denx.de/u-boot-i2c.gitnextPeter Tyser (12):
i2c.h: Provide a defaultCONFIG_SYS_I2C_SLAVEvalue
cpci750: i2c cleanup
Marvell: i2c cleanup
mpc7448hpc2: AddCONFIG_SYS_I2C_SPEEDdefine
tsi108_i2c: Addi2c_init()stub function
cm5200: Make function test command names more unique
i2c: Create common default i2c_[set|get]_bus_speed() functions
i2c: Remove deprecated individual i2c commands
i2c: Update references to individual i2c commands
cmd_i2c: Clean up i2c command argument parsing
cmd_i2c: Clean up trivial helper functions
cmd_i2c: Fix i2c help command output whenCONFIG_I2C_MUXREADME | 20 +---- board/Marvell/common/i2c.c | 19 +++-- board/cm5200/cmd_cm5200.c | 18 ++-- board/esd/cpci750/i2c.c | 16 ++-- board/esd/tasreg/tasreg.c | 4 +- common/cmd_eeprom.c | 4 - common/cmd_i2c.c | 176 +++++++++++++------------------------- cpu/arm920t/at91rm9200/i2c.c | 10 -- cpu/mpc512x/i2c.c | 14 --- cpu/mpc8260/i2c.c | 16 ---- cpu/ppc4xx/40x_spd_sdram.c | 4 - cpu/ppc4xx/44x_spd_ddr.c | 4 - cpu/ppc4xx/i2c.c | 14 --- doc/README.ebony | 20 ++-- doc/README.m52277evb | 8 +-- doc/README.m5373evb | 8 +-- doc/README.m54455evb | 8 +-- doc/README.m5475evb | 8 +-- doc/README.ppc440 | 4 +- doc/README.xpedite1k | 6 +- doc/feature-removal-schedule.txt | 12 --- drivers/i2c/soft_i2c.c | 14 --- drivers/i2c/tsi108_i2c.c | 11 ++- include/configs/DU405.h | 1 - include/configs/DU440.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MVBLM7.h | 1 - include/configs/PMC440.h | 1 - include/configs/SIMPC8313.h | 1 - include/configs/XPEDITE5200.h | 1 - include/configs/XPEDITE5370.h | 1 - include/configs/ads5121.h | 1 - include/configs/at91rm9200ek.h | 1 - include/configs/bubinga.h | 2 +- include/configs/katmai.h | 1 - include/configs/keymile-common.h | 1 - include/configs/kmeter1.h | 1 -
Quoted 8 lines
include/configs/korat.h | 1 - include/configs/mpc7448hpc2.h | 1 + include/configs/sacsng.h | 6 +- include/configs/sbc8349.h | 1 - include/configs/socrates.h | 1 - include/configs/taihu.h | 2 +- include/i2c.h | 12 ++- 51 files changed, 140 insertions(+), 324 deletions(-)
Applied to "next" branch. Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Always try to do things in chronological order; it's less confusing that way.
[U-Boot] Question on EON EN29LV160B Flash Memory
In reply to Heiko SchocherHi all,
I am going to prepare a new U-Boot with a HW which has on board an EON EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the file u-boot/include/flash.h and more exactly
173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */
174 #define EON_MANUFACT 0x011C011C /* EON manuf. ID in D23..D16, D7..D0 */
I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer ID I have different infos which indicate differente values, as here reported
173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */
174 #define EON_MANUFACT 0x7F1C7F1C /* EON manuf. ID in D23..D16, D7..D0 */
Is this correct?
Furthermore, if I would like to add this kind of flash I have to modify, add the flash type/config, the file
u-boot/drivers/mtd/jedec_flash.c
or
u-boot/drivers/mtd/cfi_flash.c
Thanks in advance.
Best Regards
Agostino Sette
TechnoLabs SpaS.S. 17 - Localit? Boschetto
CAP 67100
L'Aquila (Italy)
[U-Boot] Question on EON EN29LV160B Flash Memory
please do not "hijack" threads. if you want to start a new thread, then write a new e-mail (click on the "to" address). dont simply hit "reply" to an existing one and delete the subject/body.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20091014/de9e8c3f/attachment.pgp
[U-Boot] Question on EON EN29LV160B Flash Memory
In reply to SETTE AGOSTINO - technolabsQuoted 9 lines · On Wednesday 14 October 2009 11:20:21 SETTE AGOSTINO - technolabs wrote:
I am going to prepare a new U-Boot with a HW which has on board an EON
EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the fileu-boot/include/flash.hand more exactly173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */
174 #defineEON_MANUFACT0x011C011C/* EON manuf. ID in
D23..D16, D7..D0 */
Quoted 8 lines
I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer ID
I have different infos which indicate differente values, as here reported173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */
174 #defineEON_MANUFACT0x7F1C7F1C/* EON manuf. ID in
D23..D16, D7..D0 */Is this correct?
Yes, this looks correct on first glance. But I'm not really sure. I added Niklaus Giger to Cc, who introduced this define.
Niklaus, could you please comment here? Thanks.
Quoted 8 lines
Furthermore, if I would like to add this kind of flash I have to modify,
add the flash type/config, the file
u-boot/drivers/mtd/jedec_flash.cor
u-boot/drivers/mtd/cfi_flash.c
Changes in jedec_flash.c should be sufficient. Even though you need to enable the CFI driver (CONFIG_FLASH_CFI_DRIVER) and this JEDEC legacy driver (CONFIG_FLASH_CFI_LEGACY).
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
[U-Boot] Question on EON EN29LV160B Flash Memory
Hi Agostino
-------- Original-Nachricht --------
Quoted 25 lines
Datum: Wed, 14 Oct 2009 13:11:17 +0200
Von: Stefan Roese <[email protected]>
An: u-boot at lists.denx.de
CC: Niklaus Giger <[email protected]>, SETTE AGOSTINO - technolabs <[email protected]>
Betreff: Re: [U-Boot] Question on EON EN29LV160B Flash MemoryQuoted 10 lines · On Wednesday 14 October 2009 11:20:21 SETTE AGOSTINO - technolabs wrote:
I am going to prepare a new U-Boot with a HW which has on board an EON
EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the fileu-boot/include/flash.hand more exactly173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */
174 #defineEON_MANUFACT0x011C011C/* EON manuf. ID in
D23..D16, D7..D0 */I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer
ID
Quoted 1 line
I have different infos which indicate differente values, as here
reported
Quoted 5 lines
173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */
174 #defineEON_MANUFACT0x7F1C7F1C/* EON manuf. ID in
D23..D16, D7..D0 */
Quoted 7 lines
Quoted 1 line
Is this correct?
Yes, this looks correct on first glance. But I'm not really sure. I added Niklaus Giger to Cc, who introduced this define.
Niklaus, could you please comment here? Thanks.
See www.jedec.org/download/search/jep106Z.pdf.
I would like to cite the "JEDEC Standard Manufacturer ID Codes.pdf" chapter "2 Scope":
Quoted 16 lines
The manufacturer?s identification code is defined by one or more eight (8) bit fields, each
consisting of seven (7) data bits plus one (1) odd parity bit. The manufacturer?s identification
code as shown in Table 1, is assigned, maintained and updated by the JEDEC office. It is a
single field, limiting the possible number of vendors to 128. To expand the maximum number of
identification codes, a continuation scheme has been defined. The code 7F, as shown in Table 1,
indicates that the manufacturer?s code is beyond the limit of this field and the next sequential
manufacturer?s identification field is used. Multiple continuation fields are permitted and when
used, shall comprise of the identification code.
At the momemnt we defined 6 additional table, but potentially there could be even more. Where there is place for 16 bit values.
- ID's of the the table 1 (0xXX) get IDs of 0x00xx.
- ID's of the the table 2 (0xXX) get IDs of 0x01xx.
- ID's of the the table 3 (0xXX) get IDs of 0x02xx.
- ID's of the the table 4 (0xXX) get IDs of 0x03xx.
Using the data in the above mentioned PDF and following this
rule the manufacturer "Jennic" would receive ID 0x0686.
The proposed value of #define EON_MANUFACT 0x7F1C7F1C does not fit into 16 bits.
And don't forget to follow Stefan's remark about using JEDEC- lecagy. Then you should not have any problems.
Best regards
Niklaus
Quoted 25 lines
Quoted 8 lines
Furthermore, if I would like to add this kind of flash I have to modify,
add the flash type/config, the file
u-boot/drivers/mtd/jedec_flash.cor
u-boot/drivers/mtd/cfi_flash.cChanges in
jedec_flash.cshould be sufficient. Even though you need to enable
the CFI driver (CONFIG_FLASH_CFI_DRIVER) and this JEDEC legacy driver (CONFIG_FLASH_CFI_LEGACY).Cheers,
Stefan--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 5 lines
Niklaus Giger Switzerland Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/atbrowser