Skip to contentSkip to conversation

Please pull u-boot-i2c.git next branch

U-Boot Applied Heiko Schocher 6 participants 6 messages May 4, 2009 – Oct 15, 2009

lore
Share & tools
lore
#0 lore raw

The following changes since commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78:
Wolfgang Denk (1):

        Prepare v2009.06-rc1

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git next

Peter Tyser (12):
i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value
cpci750: i2c cleanup
Marvell: i2c cleanup
mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
tsi108_i2c: Add i2c_init() stub function
cm5200: Make function test command names more unique
i2c: Create common default i2c_[set|get]_bus_speed() functions
i2c: Remove deprecated individual i2c commands
i2c: Update references to individual i2c commands
cmd_i2c: Clean up i2c command argument parsing
cmd_i2c: Clean up trivial helper functions
cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX

 README                           |   20 +----
 board/Marvell/common/i2c.c       |   19 +++--
 board/cm5200/cmd_cm5200.c        |   18 ++--
 board/esd/cpci750/i2c.c          |   16 ++--
 board/esd/tasreg/tasreg.c        |    4 +-
 common/cmd_eeprom.c              |    4 -
 common/cmd_i2c.c                 |  176 +++++++++++++-------------------------
 cpu/arm920t/at91rm9200/i2c.c     |   10 --
 cpu/mpc512x/i2c.c                |   14 ---
 cpu/mpc8260/i2c.c                |   16 ----
 cpu/ppc4xx/40x_spd_sdram.c       |    4 -
 cpu/ppc4xx/44x_spd_ddr.c         |    4 -
 cpu/ppc4xx/i2c.c                 |   14 ---
 doc/README.ebony                 |   20 ++--
 doc/README.m52277evb             |    8 +--
 doc/README.m5373evb              |    8 +--
 doc/README.m54455evb             |    8 +--
 doc/README.m5475evb              |    8 +--
 doc/README.ppc440                |    4 +-
 doc/README.xpedite1k             |    6 +-
 doc/feature-removal-schedule.txt |   12 ---
 drivers/i2c/soft_i2c.c           |   14 ---
 drivers/i2c/tsi108_i2c.c         |   11 ++-
 include/configs/DU405.h          |    1 -
 include/configs/DU440.h          |    1 -
 include/configs/MPC8313ERDB.h    |    1 -
 include/configs/MPC8349EMDS.h    |    1 -
 include/configs/MPC8349ITX.h     |    1 -
 include/configs/MPC8360ERDK.h    |    1 -
 include/configs/MPC8536DS.h      |    1 -
 include/configs/MPC8568MDS.h     |    1 -
 include/configs/MPC8569MDS.h     |    1 -
 include/configs/MPC8572DS.h      |    1 -
 include/configs/MVBLM7.h         |    1 -
 include/configs/PMC440.h         |    1 -
 include/configs/SIMPC8313.h      |    1 -
 include/configs/XPEDITE5200.h    |    1 -
 include/configs/XPEDITE5370.h    |    1 -
 include/configs/ads5121.h        |    1 -
 include/configs/at91rm9200ek.h   |    1 -
 include/configs/bubinga.h        |    2 +-
 include/configs/katmai.h         |    1 -
 include/configs/keymile-common.h |    1 -
 include/configs/kmeter1.h        |    1 -
 include/configs/korat.h          |    1 -
 include/configs/mpc7448hpc2.h    |    1 +
 include/configs/sacsng.h         |    6 +-
 include/configs/sbc8349.h        |    1 -
 include/configs/socrates.h       |    1 -
 include/configs/taihu.h          |    2 +-
 include/i2c.h                    |   12 ++-
 51 files changed, 140 insertions(+), 324 deletions(-)
Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

Dear Heiko Schocher,

Quoted 66 lines · In message <[email protected]> you wrote:

The following changes since commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78:
Wolfgang Denk (1):

        Prepare v2009.06-rc1

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git next

Peter Tyser (12):
i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value
cpci750: i2c cleanup
Marvell: i2c cleanup
mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
tsi108_i2c: Add i2c_init() stub function
cm5200: Make function test command names more unique
i2c: Create common default i2c_[set|get]_bus_speed() functions
i2c: Remove deprecated individual i2c commands
i2c: Update references to individual i2c commands
cmd_i2c: Clean up i2c command argument parsing
cmd_i2c: Clean up trivial helper functions
cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX

 README                           |   20 +----
 board/Marvell/common/i2c.c       |   19 +++--
 board/cm5200/cmd_cm5200.c        |   18 ++--
 board/esd/cpci750/i2c.c          |   16 ++--
 board/esd/tasreg/tasreg.c        |    4 +-
 common/cmd_eeprom.c              |    4 -
 common/cmd_i2c.c                 |  176 +++++++++++++-------------------------
 cpu/arm920t/at91rm9200/i2c.c     |   10 --
 cpu/mpc512x/i2c.c                |   14 ---
 cpu/mpc8260/i2c.c                |   16 ----
 cpu/ppc4xx/40x_spd_sdram.c       |    4 -
 cpu/ppc4xx/44x_spd_ddr.c         |    4 -
 cpu/ppc4xx/i2c.c                 |   14 ---
 doc/README.ebony                 |   20 ++--
 doc/README.m52277evb             |    8 +--
 doc/README.m5373evb              |    8 +--
 doc/README.m54455evb             |    8 +--
 doc/README.m5475evb              |    8 +--
 doc/README.ppc440                |    4 +-
 doc/README.xpedite1k             |    6 +-
 doc/feature-removal-schedule.txt |   12 ---
 drivers/i2c/soft_i2c.c           |   14 ---
 drivers/i2c/tsi108_i2c.c         |   11 ++-
 include/configs/DU405.h          |    1 -
 include/configs/DU440.h          |    1 -
 include/configs/MPC8313ERDB.h    |    1 -
 include/configs/MPC8349EMDS.h    |    1 -
 include/configs/MPC8349ITX.h     |    1 -
 include/configs/MPC8360ERDK.h    |    1 -
 include/configs/MPC8536DS.h      |    1 -
 include/configs/MPC8568MDS.h     |    1 -
 include/configs/MPC8569MDS.h     |    1 -
 include/configs/MPC8572DS.h      |    1 -
 include/configs/MVBLM7.h         |    1 -
 include/configs/PMC440.h         |    1 -
 include/configs/SIMPC8313.h      |    1 -
 include/configs/XPEDITE5200.h    |    1 -
 include/configs/XPEDITE5370.h    |    1 -
 include/configs/ads5121.h        |    1 -
 include/configs/at91rm9200ek.h   |    1 -
 include/configs/bubinga.h        |    2 +-
 include/configs/katmai.h         |    1 -
 include/configs/keymile-common.h |    1 -
 include/configs/kmeter1.h        |    1 -
Quoted 8 lines
 include/configs/korat.h          |    1 -
 include/configs/mpc7448hpc2.h    |    1 +
 include/configs/sacsng.h         |    6 +-
 include/configs/sbc8349.h        |    1 -
 include/configs/socrates.h       |    1 -
 include/configs/taihu.h          |    2 +-
 include/i2c.h                    |   12 ++-
 51 files changed, 140 insertions(+), 324 deletions(-)

Applied to "next" branch. Thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always try to do things in chronological order; it's  less  confusing
that way.
#2 lore raw

[U-Boot] Question on EON EN29LV160B Flash Memory

In reply to Heiko Schocher

Hi all,

I am going to prepare a new U-Boot with a HW which has on board an EON EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the file u-boot/include/flash.h and more exactly

173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */
174 #define EON_MANUFACT 0x011C011C /* EON manuf. ID in D23..D16, D7..D0 */

I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer ID I have different infos which indicate differente values, as here reported

173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */
174 #define EON_MANUFACT 0x7F1C7F1C /* EON manuf. ID in D23..D16, D7..D0 */

Is this correct?
Furthermore, if I would like to add this kind of flash I have to modify, add the flash type/config, the file

u-boot/drivers/mtd/jedec_flash.c

or

u-boot/drivers/mtd/cfi_flash.c

Thanks in advance.

Best Regards
Agostino Sette
TechnoLabs Spa
S.S. 17 - Localit? Boschetto
CAP 67100
L'Aquila (Italy)

#3 lore raw

[U-Boot] Question on EON EN29LV160B Flash Memory

please do not "hijack" threads. if you want to start a new thread, then write a new e-mail (click on the "to" address). dont simply hit "reply" to an existing one and delete the subject/body.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20091014/de9e8c3f/attachment.pgp

#4 lore raw

[U-Boot] Question on EON EN29LV160B Flash Memory

In reply to SETTE AGOSTINO - technolabs
Quoted 9 lines · On Wednesday 14 October 2009 11:20:21 SETTE AGOSTINO - technolabs wrote:

I am going to prepare a new U-Boot with a HW which has on board an EON
EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the file u-boot/include/flash.h and more exactly

173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */
174 #define EON_MANUFACT 0x011C011C /* EON manuf. ID in
D23..D16, D7..D0 */

Quoted 8 lines

I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer ID
I have different infos which indicate differente values, as here reported

173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */
174 #define EON_MANUFACT 0x7F1C7F1C /* EON manuf. ID in
D23..D16, D7..D0 */

Is this correct?

Yes, this looks correct on first glance. But I'm not really sure. I added Niklaus Giger to Cc, who introduced this define.

Niklaus, could you please comment here? Thanks.

Quoted 8 lines

Furthermore, if I would like to add this kind of flash I have to modify,
add the flash type/config, the file

u-boot/drivers/mtd/jedec_flash.c

or

u-boot/drivers/mtd/cfi_flash.c

Changes in jedec_flash.c should be sufficient. Even though you need to enable the CFI driver (CONFIG_FLASH_CFI_DRIVER) and this JEDEC legacy driver (CONFIG_FLASH_CFI_LEGACY).

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

#5 lore raw

[U-Boot] Question on EON EN29LV160B Flash Memory

Hi Agostino

-------- Original-Nachricht --------

Quoted 25 lines

Datum: Wed, 14 Oct 2009 13:11:17 +0200
Von: Stefan Roese <[email protected]>
An: u-boot at lists.denx.de
CC: Niklaus Giger <[email protected]>, SETTE AGOSTINO - technolabs <[email protected]>
Betreff: Re: [U-Boot] Question on EON EN29LV160B Flash Memory

Quoted 10 lines · On Wednesday 14 October 2009 11:20:21 SETTE AGOSTINO - technolabs wrote:

I am going to prepare a new U-Boot with a HW which has on board an EON
EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the file u-boot/include/flash.h and more exactly

173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */
174 #define EON_MANUFACT 0x011C011C /* EON manuf. ID in
D23..D16, D7..D0 */

I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer

ID

Quoted 1 line

I have different infos which indicate differente values, as here

reported

Quoted 5 lines

173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */
174 #define EON_MANUFACT 0x7F1C7F1C /* EON manuf. ID in
D23..D16, D7..D0 */

Quoted 7 lines
Quoted 1 line

Is this correct?

Yes, this looks correct on first glance. But I'm not really sure. I added Niklaus Giger to Cc, who introduced this define.

Niklaus, could you please comment here? Thanks.

See www.jedec.org/download/search/jep106Z.pdf.

I would like to cite the "JEDEC Standard Manufacturer ID Codes.pdf" chapter "2 Scope":

Quoted 16 lines

The manufacturer?s identification code is defined by one or more eight (8) bit fields, each
consisting of seven (7) data bits plus one (1) odd parity bit. The manufacturer?s identification
code as shown in Table 1, is assigned, maintained and updated by the JEDEC office. It is a
single field, limiting the possible number of vendors to 128. To expand the maximum number of
identification codes, a continuation scheme has been defined. The code 7F, as shown in Table 1,
indicates that the manufacturer?s code is beyond the limit of this field and the next sequential
manufacturer?s identification field is used. Multiple continuation fields are permitted and when
used, shall comprise of the identification code.

At the momemnt we defined 6 additional table, but potentially there could be even more. Where there is place for 16 bit values.
- ID's of the the table 1 (0xXX) get IDs of 0x00xx.
- ID's of the the table 2 (0xXX) get IDs of 0x01xx.
- ID's of the the table 3 (0xXX) get IDs of 0x02xx.
- ID's of the the table 4 (0xXX) get IDs of 0x03xx.
Using the data in the above mentioned PDF and following this
rule the manufacturer "Jennic" would receive ID 0x0686.

The proposed value of #define EON_MANUFACT 0x7F1C7F1C does not fit into 16 bits.

And don't forget to follow Stefan's remark about using JEDEC- lecagy. Then you should not have any problems.

Best regards

Niklaus

Quoted 25 lines
Quoted 8 lines

Furthermore, if I would like to add this kind of flash I have to modify,
add the flash type/config, the file

u-boot/drivers/mtd/jedec_flash.c

or

u-boot/drivers/mtd/cfi_flash.c

Changes in jedec_flash.c should be sufficient. Even though you need to enable
the CFI driver (CONFIG_FLASH_CFI_DRIVER) and this JEDEC legacy driver (CONFIG_FLASH_CFI_LEGACY).

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 5 lines
Niklaus Giger
Switzerland

Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 -
sicherer, schneller und einfacher! http://portal.gmx.net/de/go/atbrowser