Skip to contentSkip to conversation

S3C2440: SD-Card access fails

PATCH New Juergen Beisert 2 participants 4 messages Oct 15, 2009 – Oct 16, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi list,

I'm using an S3C2440 based custom made board with a 2.6.31.3 kernel (with a few modifications to add the boards specific file). When I do some traffic on the SD card (1GiB SD type), for example untaring an archive I get a failure like this one:

Unable to handle kernel paging request at virtual address 4b856104
pgd = c0004000
[4b856104] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.31.3jbe #6)
PC is at s3c2410_gpio_getpin+0x18/0x2c
LR is at s3cmci_card_present+0x28/0x44
pc : [<c002cf10>]    lr : [<c0199290>]    psr: a0000013

sp : c1db9df8 ip : c1db9e08 fp : c1db9e04
r10: c1d33ae4 r9 : c1db9e78 r8 : 00000001
r7 : c1d61e00 r6 : c1db9e78 r5 : c1c3b000 r4 : c001d8d8 r3 : 4b856100 r2 : c1db9eb8 r1 : c1db9e78 r0 : a10ac21a
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: c000717f Table: 3034c000 DAC: 00000017 Process mmcqd (pid: 375, stack limit = 0xc1db8270)

Stack: (0xc1db9df8 to 0xc1dba000)

9de0: c1db9e1c c1db9e08
9e00: c0199290 c002cf08 c1d33ae4 c1c3b140 c1db9e3c c1db9e20 c0199960 c0199278 9e20: c1d33ae4 c1db9e78 c1c3b000 c1d26708 c1db9e64 c1db9e40 c0190418 c019993c 9e40: c0196718 00000000 c1db9e48 c1db9e48 c1d26708 c1d33ae4 c1db9f94 c1db9e68 9e60: c01962b8 c019031c c02c01c0 c02c0100 c1db9e8c 00000000 c1db9e8c c1db9ee4 9e80: c1db9eb8 c1db9e44 c01904a8 00000012 08074600 00000000 00000000 00000000 9ea0: 00000000 000000b5 00000000 00000000 c1db9ee4 c1db9e78 0000000c 00000000 9ec0: 00000000 00000000 00000000 00000000 0000049d 00000000 00000000 00000000 9ee0: c1db9e78 05f5e100 00000000 00000200 00000008 00000000 00000200 00000000 9f00: c1db9eb8 c1db9e78 00000001 c1ceb800 c1c3d830 c1daac00 c1db9f44 c1db9f28 9f20: c1c6e01c c1daac00 00000017 c1daac00 00000000 c1d34438 00000000 c1d34438 9f40: 00000000 c1db9f5c c1db9f7c c1db9f58 c0115740 c1d26708 c1db9f7c c1db9f68 9f60: c0114ea4 c0119fcc c1db8000 c1d26708 c1d33ae4 c1db8000 c1d33aec c1d34438 9f80: 00000000 c1d34540 c1db9fc4 c1db9f98 c0196b50 c01960f4 c1db9fc4 c1db9fcc 9fa0: c1c3fd3c c1d33ae4 c0196a68 00000000 00000000 00000000 c1db9ff4 c1db9fc8 9fc0: c0048cb4 c0196a78 00000000 00000000 c1db9fd0 c1db9fd0 00000000 00000000 9fe0: 00000000 00000000 00000000 c1db9ff8 c00386e8 c0048c40 00000000 00000000

Backtrace:
[<c002cef8>] (s3c2410_gpio_getpin+0x0/0x2c) from [<c0199290>] 
(s3cmci_card_present+0x28/0x44)
[<c0199268>] (s3cmci_card_present+0x0/0x44) from [<c0199960>] 
(s3cmci_request+0x34/0x6c)
 r4:c1c3b140
[<c019992c>] (s3cmci_request+0x0/0x6c) from [<c0190418>] 
(mmc_wait_for_req+0x10c/0x124)
 r6:c1d26708 r5:c1c3b000 r4:c1db9e78
[<c019030c>] (mmc_wait_for_req+0x0/0x124) from [<c01962b8>] 
(mmc_blk_issue_rq+0x1d4/0x550)
 r5:c1d33ae4 r4:c1d26708
[<c01960e4>] (mmc_blk_issue_rq+0x0/0x550) from [<c0196b50>] 
(mmc_queue_thread+0xe8/0xec)
[<c0196a68>] (mmc_queue_thread+0x0/0xec) from [<c0048cb4>] (kthread+0x84/0x8c)
[<c0048c30>] (kthread+0x0/0x8c) from [<c00386e8>] (do_exit+0x0/0x21c)
 r7:00000000 r6:00000000 r5:00000000 r4:00000000
Code: e24cb004 e3c0301f e1a030a3 e28334fb (e5933004)
---[ end trace 969be95693003e89 ]---

This failure at adress 0xc002cf10 is the last line in function s3c2410_gpio_getpin in arch/arm/plat-s3c24xx/gpio.c:

    return __raw_readl(base + 0x04) & (1<< offs);

But it doesn't fails always at this location. I saw various location when I try
to find the cause of the failure. Another failure was:

mmc0: card b368 removed

Unable to handle kernel paging request at virtual address 00001000
pgd = c0004000
[00001000] *pgd=00000000
Internal error: Oops: 0 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.31.3jbe #4)
PC is at 0x1000
LR is@s3cmci_set_ios+0xf0/0x1f0
pc : [<00001000>]    lr : [<c01993d8>]    psr: 20000013
[...]
Backtrace:
[<c01992e8>] (s3cmci_set_ios+0x0/0x1f0) from [<c018f9e8>] 
(mmc_power_off+0x54/0x58)
[<c018f994>] (mmc_power_off+0x0/0x58) from [<c018fc74>] 
(mmc_detach_bus+0x6c/0xcc)
[<c018fc08>] (mmc_detach_bus+0x0/0xcc) from [<c0192a80>] 
(mmc_sd_detect+0x78/0x8c)

[...]

But: It does not happen immediately when the traffic starts. It always happens a few seconds after the traffic starts. And it fails more often when I run a kernel with CONFIG_KALLSYMS=n instead of =y.
And currently the system only fails if I use the SD card. While running from NFS root and doing some action in the system it seems to run stable.

Any idea what is going on here?

Regards,
Juergen

Signature · 4 lines
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |
#1 lore raw
Quoted 6 lines · Juergen Beisert

Hi list,

I'm using an S3C2440 based custom made board with a 2.6.31.3 kernel (with a few modifications to add the boards specific file). When I do some traffic on the SD card (1GiB SD type), for example untaring an archive I get a failure like this one:

Is your platform data marked __initdata?

Quoted 104 lines
Unable to handle kernel paging request at virtual address 4b856104
pgd = c0004000
[4b856104] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.31.3jbe #6)
PC is at s3c2410_gpio_getpin+0x18/0x2c
LR is at s3cmci_card_present+0x28/0x44
pc : [<c002cf10>]    lr : [<c0199290>]    psr: a0000013

sp : c1db9df8 ip : c1db9e08 fp : c1db9e04
r10: c1d33ae4 r9 : c1db9e78 r8 : 00000001
r7 : c1d61e00 r6 : c1db9e78 r5 : c1c3b000 r4 : c001d8d8 r3 : 4b856100 r2 : c1db9eb8 r1 : c1db9e78 r0 : a10ac21a
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: c000717f Table: 3034c000 DAC: 00000017 Process mmcqd (pid: 375, stack limit = 0xc1db8270)

Stack: (0xc1db9df8 to 0xc1dba000)

9de0: c1db9e1c c1db9e08
9e00: c0199290 c002cf08 c1d33ae4 c1c3b140 c1db9e3c c1db9e20 c0199960 c0199278 9e20: c1d33ae4 c1db9e78 c1c3b000 c1d26708 c1db9e64 c1db9e40 c0190418 c019993c 9e40: c0196718 00000000 c1db9e48 c1db9e48 c1d26708 c1d33ae4 c1db9f94 c1db9e68 9e60: c01962b8 c019031c c02c01c0 c02c0100 c1db9e8c 00000000 c1db9e8c c1db9ee4 9e80: c1db9eb8 c1db9e44 c01904a8 00000012 08074600 00000000 00000000 00000000 9ea0: 00000000 000000b5 00000000 00000000 c1db9ee4 c1db9e78 0000000c 00000000 9ec0: 00000000 00000000 00000000 00000000 0000049d 00000000 00000000 00000000 9ee0: c1db9e78 05f5e100 00000000 00000200 00000008 00000000 00000200 00000000 9f00: c1db9eb8 c1db9e78 00000001 c1ceb800 c1c3d830 c1daac00 c1db9f44 c1db9f28 9f20: c1c6e01c c1daac00 00000017 c1daac00 00000000 c1d34438 00000000 c1d34438 9f40: 00000000 c1db9f5c c1db9f7c c1db9f58 c0115740 c1d26708 c1db9f7c c1db9f68 9f60: c0114ea4 c0119fcc c1db8000 c1d26708 c1d33ae4 c1db8000 c1d33aec c1d34438 9f80: 00000000 c1d34540 c1db9fc4 c1db9f98 c0196b50 c01960f4 c1db9fc4 c1db9fcc 9fa0: c1c3fd3c c1d33ae4 c0196a68 00000000 00000000 00000000 c1db9ff4 c1db9fc8 9fc0: c0048cb4 c0196a78 00000000 00000000 c1db9fd0 c1db9fd0 00000000 00000000 9fe0: 00000000 00000000 00000000 c1db9ff8 c00386e8 c0048c40 00000000 00000000

Backtrace:
[<c002cef8>] (s3c2410_gpio_getpin+0x0/0x2c) from [<c0199290>] 
(s3cmci_card_present+0x28/0x44)
[<c0199268>] (s3cmci_card_present+0x0/0x44) from [<c0199960>] 
(s3cmci_request+0x34/0x6c)
 r4:c1c3b140
[<c019992c>] (s3cmci_request+0x0/0x6c) from [<c0190418>] 
(mmc_wait_for_req+0x10c/0x124)
 r6:c1d26708 r5:c1c3b000 r4:c1db9e78
[<c019030c>] (mmc_wait_for_req+0x0/0x124) from [<c01962b8>] 
(mmc_blk_issue_rq+0x1d4/0x550)
 r5:c1d33ae4 r4:c1d26708
[<c01960e4>] (mmc_blk_issue_rq+0x0/0x550) from [<c0196b50>] 
(mmc_queue_thread+0xe8/0xec)
[<c0196a68>] (mmc_queue_thread+0x0/0xec) from [<c0048cb4>] (kthread+0x84/0x8c)
[<c0048c30>] (kthread+0x0/0x8c) from [<c00386e8>] (do_exit+0x0/0x21c)
 r7:00000000 r6:00000000 r5:00000000 r4:00000000
Code: e24cb004 e3c0301f e1a030a3 e28334fb (e5933004)
---[ end trace 969be95693003e89 ]---

This failure at adress 0xc002cf10 is the last line in function s3c2410_gpio_getpin in arch/arm/plat-s3c24xx/gpio.c:

    return __raw_readl(base + 0x04) & (1<< offs);

But it doesn't fails always at this location. I saw various location when I try
to find the cause of the failure. Another failure was:

mmc0: card b368 removed

Unable to handle kernel paging request at virtual address 00001000
pgd = c0004000
[00001000] *pgd=00000000
Internal error: Oops: 0 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.31.3jbe #4)
PC is at 0x1000
LR is at s3cmci_set_ios+0xf0/0x1f0
pc : [<00001000>]    lr : [<c01993d8>]    psr: 20000013
[...]
Backtrace:
[<c01992e8>] (s3cmci_set_ios+0x0/0x1f0) from [<c018f9e8>] 
(mmc_power_off+0x54/0x58)
[<c018f994>] (mmc_power_off+0x0/0x58) from [<c018fc74>] 
(mmc_detach_bus+0x6c/0xcc)
[<c018fc08>] (mmc_detach_bus+0x0/0xcc) from [<c0192a80>] 
(mmc_sd_detect+0x78/0x8c)

[...]

But: It does not happen immediately when the traffic starts. It always happens a few seconds after the traffic starts. And it fails more often when I run a kernel with CONFIG_KALLSYMS=n instead of =y.
And currently the system only fails if I use the SD card. While running from NFS root and doing some action in the system it seems to run stable.

Any idea what is going on here?

Regards,
Juergen

Signature · 9 lines
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 5 lines
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.
#2 lore raw

Hi Ben,

Quoted 7 lines · Ben Dooks
Quoted 4 lines · Juergen Beisert

I'm using an S3C2440 based custom made board with a 2.6.31.3 kernel (with a few modifications to add the boards specific file). When I do some traffic on the SD card (1GiB SD type), for example untaring an archive I get a failure like this one:

Is your platform data marked __initdata?

Thanks for your answer. Yes, my local s3c24xx_mci_pdata structure was marked with __initdata, like the one in mach-s3c2440/mach-mini2440.c (seems I used the wrong example to create my own sources...).
I removed this __initdata marker in my sources and now SD card access seems to work (tests are still running).

Regards,
Juergen

Signature · 4 lines
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |
#3 lore raw

PATCH 1/1 S3C2440: SD-Card usage fails with attribute __initdata for the platformdata

In reply to Ben Dooks

Author: Juergen Beisert <[email protected]>
Subject: Do not use __initdata for MMC's platform data

With __initdata for MMC's platform data the kernel fails at various locations when using the MMC/SD cards

---

arch/arm/mach-s3c2440/mach-mini2440.c +1 -1
index ec71a69..f307666 100644
@@ -233,7 +233,7 @@ struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 
 /* MMC/SD  */
 
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg = {
    .gpio_detect   = S3C2410_GPG(8),
    .gpio_wprotect = S3C2410_GPH(8),
    .set_power     = NULL,