new default shortcut to config & build a board
PATCH 1/1 new default shortcut to config & build a board
The majority of the time that I build things in U-Boot, I want to just build for the board. I don't make board config tweaks after selecting the board. So add a new pattern rule that allows people to combine two steps in one go:
`make foo_config && make` => `make foo`
This shouldn't conflict with any existing make rules as the pattern rule is used only the rule doesn't already exist.
--- Makefile | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
Makefile +4 -4
@@ -495,6 +495,10 @@ unconfig: $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep +%: %_config + $(MAKE) $@_config + $(MAKE) + #======================================================================== # PowerPC #========================================================================
@@ -3505,10 +3509,6 @@ BFIN_BOARDS += ibf-dsp561 $(BFIN_BOARDS:%=%_config) : unconfig @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) -$(BFIN_BOARDS): - $(MAKE) $@_config - $(MAKE) - #======================================================================== # AVR32 #========================================================================
Signature · 1 line
1.6.4
PATCH 1/1 new default shortcut to config & build a board
Quoted 8 lines · On Monday 24 August 2009 17:28:26 Mike Frysinger wrote:
The majority of the time that I build things in U-Boot, I want to just build for the board. I don't make board config tweaks after selecting the board. So add a new pattern rule that allows people to combine two steps in one go:
`make foo_config && make` => `make foo`This shouldn't conflict with any existing make rules as the pattern rule is used only the rule doesn't already exist.
ping
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20091001/d7b45b83/attachment.pgp
PATCH 1/1 new default shortcut to config & build a board
Hi Mike,
Quoted 9 lines · On Monday 24 August 2009 17:28:26 Mike Frysinger wrote:
Quoted 8 lines
The majority of the time that I build things in U-Boot, I want to just build for the board. I don't make board config tweaks after selecting the board. So add a new pattern rule that allows people to combine two steps in one go:
`make foo_config && make` => `make foo`This shouldn't conflict with any existing make rules as the pattern rule is used only the rule doesn't already exist.
Hm, I just tried this patch and I see a strange behaviour:
[dzu at pollux u-boot-testing (mao-rd-hor)]$ make -s sequoia Configuring for sequoia board...
Configuring for sequoia board...
It is not obvious for me why I get this message twice - all I verified is that both messages are definitely from stdout only.
Apart from that, I don't see a reason why this should not go in. Currently I use "./MAKEALL <board>" for the same purpose btw.
Cheers
Detlev
Signature · 6 lines
If we knew what it was we were doing, we wouldn't call it research.
-- Einstein
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.dePATCH 1/1 new default shortcut to config & build a board
In reply to Mike FrysingerQuoted 6 lines · Mike Frysinger
+%: %_config
+ ? ? ? $(MAKE) $@_config <--- Delete this, because the %_config already calls the target config block+ ? ? ? $(MAKE)
+
best regards,
luigi
Signature · 10 lines
Luigi 'Comio' Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 web: www.idf-hit.com mail: luigi.mantellini at idf-hit.com
PATCH v2 1/1 new default shortcut to config & build a board
In reply to Mike FrysingerThe majority of the time that I build things in U-Boot, I want to just build for the board. I don't make board config tweaks after selecting the board. So add a new pattern rule that allows people to combine two steps in one go:
`make foo_config && make` => `make foo`
This shouldn't conflict with any existing make rules as the pattern rule is used only the rule doesn't already exist.
---
v2
- fix duplicate config left over from original code pointed out by Luigi
Makefile | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-)
Makefile +3 -4
@@ -501,6 +501,9 @@ unconfig: $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep +%: %_config + $(MAKE) + #======================================================================== # PowerPC #========================================================================
@@ -3525,10 +3528,6 @@ BFIN_BOARDS += ibf-dsp561 $(BFIN_BOARDS:%=%_config) : unconfig @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) -$(BFIN_BOARDS): - $(MAKE) $@_config - $(MAKE) - #======================================================================== # AVR32 #========================================================================
Signature · 1 line
1.6.5.rc2
Wolfgang Denk
AppliedPATCH v2 1/1 new default shortcut to config & build a board
Dear Mike Frysinger,
Quoted 9 lines · In message <[email protected]> you wrote:
The majority of the time that I build things in U-Boot, I want to just build for the board. I don't make board config tweaks after selecting the board. So add a new pattern rule that allows people to combine two steps in one go:
`make foo_config && make` => `make foo`This shouldn't conflict with any existing make rules as the pattern rule is used only the rule doesn't already exist.
Quoted 7 lines
Signed-off-by Mike Frysinger <[email protected]>---
v2
- fix duplicate config left over from original code pointed out by LuigiMakefile | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Die meisten Menschen pflegen im Kindesalter vom Zeigen auf Gegenst?n-
de (Mausbewegung) und "ga" sagen (Mausklick) abzukommen, zugunsten
eines m?chtigeren und langwierig zu erlernenden Tools (Sprache).
-- Achim Linder in de.comp.os.linux.misc