Skip to contentSkip to conversation

Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x

PATCH New Martin Michlmayr 1 participant 1 message Nov 5, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x

MPP36 is used on the QNAP TS-11x/TS-21x devices to indicate how much RAM there is: it's high for 512 MB RAM (TS-x19) and low for 256 MB (TS-x10). While this may not be very useful, let's add it for completeness.

arch/arm/mach-kirkwood/ts219-setup.c +1 -0
index ec1a64f..cb0f56d 100644
@@ -152,6 +152,7 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	0
 };
 
Signature · 2 lines
Martin Michlmayr
http://www.cyrius.com/