loading applications sequentially.
Hello
we have a system on which we load first one executable that executes some test code to make sure the board's hardware is in a good shape. Once this is confirmed the SW returns to the loader and in a second step real SW operational SW is loaded. In fact we want to load/execute 2 (or more) builds sequentially.
We currently use a proprietary loader but we would like to switch to a more standard solution like uboot.
Is the above described mechanism supported by u-boot?
Thanks
Dear Ronny,
Quoted 11 lines · In message <[email protected]> you…
we have a system on which we load first one executable that executes some test code to make sure the board's hardware is in a good shape. Once this is confirmed the SW returns to the loader and in a second step real SW operational SW is loaded. In fact we want to load/execute 2 (or more) builds sequentially.
We currently use a proprietary loader but we would like to switch to a more standard solution like uboot.
Is the above described mechanism supported by u-boot?
Yes, it is. U-Boot is very powerful and flexible. You can even run shell scripts...
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "What if" is a trademark of Hewlett Packard, so stop using it in your sentences without permission, or risk being sued.