Skip to contentSkip to conversation

loading applications sequentially.

U-Boot ronny meeus 2 participants 2 messages Nov 10, 2009

lore
Share & tools
lore
#0 lore raw

Hello

we have a system on which we load first one executable that executes some test code to make sure the board's hardware is in a good shape. Once this is confirmed the SW returns to the loader and in a second step real SW operational SW is loaded. In fact we want to load/execute 2 (or more) builds sequentially.

We currently use a proprietary loader but we would like to switch to a more standard solution like uboot.

Is the above described mechanism supported by u-boot?

Thanks

#1 lore raw

Dear Ronny,

Quoted 11 lines · In message <[email protected]> you…

we have a system on which we load first one executable that executes some test code to make sure the board's hardware is in a good shape. Once this is confirmed the SW returns to the loader and in a second step real SW operational SW is loaded. In fact we want to load/execute 2 (or more) builds sequentially.

We currently use a proprietary loader but we would like to switch to a more standard solution like uboot.

Is the above described mechanism supported by u-boot?

Yes, it is. U-Boot is very powerful and flexible. You can even run shell scripts...

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"What if" is a trademark of Hewlett Packard, so stop using it in your
sentences without permission, or risk being sued.