Fix for Void function returning value in sbc35-a9g20
PATCH 1/1 Fix for Void function returning value in sbc35-a9g20
From: Sandeep Paulraj <[email protected]>
Void function was returning 0 in the m41t94 rtc driver. This makes it similar to m41t62 rtc driver.
--- drivers/rtc/m41t94.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/rtc/m41t94.c +0 -1
@@ -120,5 +120,4 @@ void rtc_reset(void)* Could not be tested as the reset pin is not wired on * the sbc35-ag20 board */ -return 0 ; }
Signature · 1 line
1.6.0.4
Tom
AppliedPATCH 1/1 Fix for Void function returning value in sbc35-a9g20
Quoted 15 lines · s-paulraj at ti.com
From: Sandeep Paulraj <[email protected]>
Void function was returning 0 in the m41t94 rtc driver. This makes it similar to m41t62 rtc driver.
Signed-off-by Sandeep Paulraj <[email protected]>--- drivers/rtc/m41t94.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)drivers/rtc/m41t94.c +0
-0
drivers/rtc/m41t94.c void rtc_reset(void) · line 123
Quoted 5 lines
drivers/rtc/m41t94.c +0
-1@@ -120,5 +120,4 @@ void rtc_reset(void)* Could not be tested as the reset pin is not wired on * the sbc35-ag20 board */ -return 0 ; }
Yes this does kill the warning.
Ack-ed
pushed to arm/next.
Tom
PATCH 1/1 Fix for Void function returning value in sbc35-a9g20
Dear Tom,
Quoted 25 lines · In message <[email protected]> you wrote:
Quoted 15 lines · s-paulraj at ti.com
From: Sandeep Paulraj <[email protected]>
Void function was returning 0 in the m41t94 rtc driver. This makes it similar to m41t62 rtc driver.
Signed-off-by Sandeep Paulraj <[email protected]>--- drivers/rtc/m41t94.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)drivers/rtc/m41t94.c +0
-0drivers/rtc/m41t94.c void rtc_reset(void) · line 123
Quoted 5 lines
drivers/rtc/m41t94.c +0
-1@@ -120,5 +120,4 @@ void rtc_reset(void)* Could not be tested as the reset pin is not wired on * the sbc35-ag20 board */ -return 0 ; }Yes this does kill the warning.
Ack-ed
Quoted 1 line
pushed to arm/next.
Why next? This is a bug fix, isn't it? Let's include it now.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Niklaus Wirth has lamented that, whereas Europeans pronounce his name correctly (Ni-klows Virt), Americans invariably mangle it into (Nick- les Worth). Which is to say that Europeans call him by name, but Americans call him by value.