Skip to contentSkip to conversation

omap3: rx51: Use wl1251 in SPI mode 3

PATCH New Kalle Valo 2 participants 2 messages Nov 25, 2009 – Dec 4, 2009

Subsystems (3)
lore
Share & tools
lore

Kalle Valo

author
#0 lore raw

PATCH 1/1 omap3: rx51: Use wl1251 in SPI mode 3

From: Kalle Valo <[email protected]>

Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly.

---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/board-rx51-peripherals.c +1 -1
index 4f347f8..e66d728 100644
@@ -59,7 +59,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.bus_num		= 4,
 		.chip_select		= 0,
 		.max_speed_hz   	= 48000000,
-		.mode                   = SPI_MODE_2,
+		.mode                   = SPI_MODE_3,
 		.controller_data	= &wl1251_mcspi_config,
 		.platform_data		= &wl1251_pdata,
 	},
maintainer
#1 lore raw

PATCH 1/1 omap3: rx51: Use wl1251 in SPI mode 3

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: for-next-vol2

Initial commit ID (Likely to change): d7af6dcd71cfbddfbca7e370c2fc888cb1c938ba

PatchWorks
http://patchwork.kernel.org/patch/63001/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=d7af6dcd71cfbddfbca7e370c2fc888cb1c938ba