omap3: rx51: Use wl1251 in SPI mode 3
Subsystems (3)
PATCH 1/1 omap3: rx51: Use wl1251 in SPI mode 3
From: Kalle Valo <[email protected]>
Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly.
Signed-off-by Kalle Valo <[email protected]>
--- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/board-rx51-peripherals.c +1 -1
@@ -59,7 +59,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .bus_num = 4, .chip_select = 0, .max_speed_hz = 48000000, - .mode = SPI_MODE_2, + .mode = SPI_MODE_3, .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, },
Tony Lindgren
maintainerPATCH 1/1 omap3: rx51: Use wl1251 in SPI mode 3
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: for-next-vol2
Initial commit ID (Likely to change): d7af6dcd71cfbddfbca7e370c2fc888cb1c938ba
PatchWorks
http://patchwork.kernel.org/patch/63001/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=d7af6dcd71cfbddfbca7e370c2fc888cb1c938ba