staging/dream: add missing include files/fix compilation
Subsystems (3)
PATCH 1/1 staging/dream: add missing include files/fix compilation
This adds missing include files, so it should now compile. ifdef guards were added to Kconfig, so it should not cause problems on non-arch-msm machines.
drivers/staging/dream/Kconfig +41 -2
@@ -1,16 +1,55 @@ config DREAM - tristate "HTC Dream support" - depends on BROKEN + bool "HTC Dream support" + depends on ARCH_MSM + +if DREAM source "drivers/staging/dream/smd/Kconfig" source "drivers/staging/dream/camera/Kconfig" +config MSM_AMSS_VERSION + int + default 6210 if MSM_AMSS_VERSION_6210 + default 6220 if MSM_AMSS_VERSION_6220 + default 6225 if MSM_AMSS_VERSION_6225 + default 6350 if MSM_AMSS_VERSION_6350 + +choice + prompt "AMSS modem firmware version" + + default MSM_AMSS_VERSION_6225 + + config MSM_AMSS_VERSION_6210 + bool "6.2.10" + + config MSM_AMSS_VERSION_6220 + bool "6.2.20" + + config MSM_AMSS_VERSION_6225 + bool "6.2.20 + New ADSP" + + config MSM_AMSS_VERSION_6350 + bool "6.3.50" +endchoice + +config MSM_ADSP + tristate "MSM ADSP driver" + default y + help + Provides access to registers needed by the userspace aDSP library. config INPUT_GPIO tristate "GPIO driver support" help Say Y here if you want to support gpio based keys, wheels etc... +config GENERIC_GPIO + bool + default y +config ANDROID_PMEM + bool "Android pmem allocator" + default y +endif
drivers/staging/dream/Makefile +3 -0
@@ -1,4 +1,7 @@ +EXTRA_CFLAGS=-Idrivers/staging/dream/include obj-$(CONFIG_MSM_ADSP) += qdsp5/ smd/ obj-$(CONFIG_MSM_CAMERA) += camera/ obj-$(CONFIG_INPUT_GPIO) += gpio_axis.o gpio_event.o gpio_input.o gpio_matrix.o gpio_output.o +obj-$(CONFIG_ANDROID_PMEM) += pmem.o +obj-y += generic_gpio.o
drivers/staging/dream/camera/Kconfig +1 -1
@@ -15,7 +15,7 @@ config MSM_CAMERA_DEBUG config MSM_CAMERA_FLASH bool "Qualcomm MSM camera flash support" - depends on MSM_CAMERA + depends on MSM_CAMERA && BROKEN ---help--- Enable support for LED flash for msm camera
drivers/staging/dream/camera/Makefile +1 -0
@@ -1,3 +1,4 @@ +EXTRA_CFLAGS=-Idrivers/staging/dream/include obj-$(CONFIG_MT9T013) += mt9t013.o mt9t013_reg.o obj-$(CONFIG_MT9D112) += mt9d112.o mt9d112_reg.o obj-$(CONFIG_MT9P012) += mt9p012_fox.o mt9p012_reg.o
drivers/staging/dream/camera/mt9t013.c +1 -1
@@ -9,7 +9,7 @@#include <linux/miscdevice.h> #include <linux/kernel.h> #include <media/msm_camera.h> -#include <mach/gpio.h> +#include <linux/gpio.h> #include <mach/camera.h> #include <asm/mach-types.h> #include "mt9t013.h"
drivers/staging/dream/gpio_chip.h new file +38 -0
@@ -0,0 +1,38 @@ +/* arch/arm/mach-msm/gpio_chip.h +* +* Copyright (C) 2007 Google, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef _LINUX_GPIO_CHIP_H +#define _LINUX_GPIO_CHIP_H + +#include <linux/list.h> + +struct gpio_chip { +struct list_head list; +struct gpio_state *state; + +unsigned int start; +unsigned int end; + +int (*configure)(struct gpio_chip *chip,unsigned int gpio,unsigned long flags); +int (*get_irq_num)(struct gpio_chip *chip,unsigned int gpio,unsigned int *irqp,unsigned long *irqnumflagsp); +int (*read)(struct gpio_chip *chip,unsigned int gpio); +int (*write)(struct gpio_chip *chip,unsigned int gpio,unsigned on); +int (*read_detect_status)(struct gpio_chip *chip,unsigned int gpio); +int (*clear_detect_status)(struct gpio_chip *chip,unsigned int gpio); +}; + +int register_gpio_chip (struct gpio_chip *gpio_chip); + +#endif
drivers/staging/dream/include/linux/android_pmem.h new file +80 -0
80 lines not on this page · raw message
drivers/staging/dream/include/linux/gpio_event.h new file +154 -0
154 lines not on this page · raw message
drivers/staging/dream/include/linux/msm_adsp.h new file +84 -0
84 lines not on this page · raw message
drivers/staging/dream/include/linux/msm_audio.h new file +115 -0
115 lines not on this page · raw message
drivers/staging/dream/include/linux/msm_mdp.h new file +86 -0
86 lines not on this page · raw message
drivers/staging/dream/include/linux/msm_rpcrouter.h new file +47 -0
47 lines not on this page · raw message
drivers/staging/dream/include/linux/wakelock.h new file +91 -0
91 lines not on this page · raw message
drivers/staging/dream/include/mach/camera.h new file +279 -0
279 lines not on this page · raw message
drivers/staging/dream/include/mach/gpio.h new file +47 -0
47 lines not on this page · raw message
drivers/staging/dream/include/mach/msm_adsp.h new file +112 -0
112 lines not on this page · raw message
drivers/staging/dream/include/mach/msm_rpcrouter.h new file +179 -0
179 lines not on this page · raw message
drivers/staging/dream/include/mach/msm_smd.h new file +107 -0
107 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audplaycmdi.h new file +94 -0
94 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audplaymsg.h new file +70 -0
70 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audppcmdi.h new file +914 -0
914 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audppmsg.h new file +318 -0
318 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audpreproccmdi.h new file +256 -0
101 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audpreprocmsg.h new file +85 -0
85 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audreccmdi.h new file +176 -0
176 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5audrecmsg.h new file +127 -0
127 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5jpegcmdi.h new file +376 -0
376 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5jpegmsg.h new file +177 -0
177 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5lpmcmdi.h new file +82 -0
82 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5lpmmsg.h new file +80 -0
80 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5vdeccmdi.h new file +235 -0
235 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5vdecmsg.h new file +107 -0
107 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5venccmdi.h new file +212 -0
212 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5vfecmdi.h new file +910 -0
910 lines not on this page · raw message
drivers/staging/dream/include/mach/qdsp5/qdsp5vfemsg.h new file +290 -0
290 lines not on this page · raw message
drivers/staging/dream/include/media/msm_camera.h new file +388 -0
388 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Part of the diff is not shown here. View the raw message.
Quoted 5 lines · Pavel Machek
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>
Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Care to refresh this?
thanks,
greg k-h
Quoted 9 lines · Greg KH
Quoted 5 lines · Pavel Machek
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Strange, it seems it is almost all already in. Well, good :-).
But there's small problem. linux-next now contains dwalker's tree, and I could not get it to compile, even with staging disabled. I'll need to look into that.
Here are remaining few patches, now easy to read. (It also shows that at least CONFIG_AMSS_VERSION and CONFIG_GPIO should really be in arch/arm. I believe it will get there in .34 or so...)
---
Guard whole dream/ specific Kconfig with CONFIG_DREAM so that we don't cause compile failures in other architectures. Add missing pieces so that it compiles.
I am not sure if this is ready for staging. I guess we should wait till I get tree to compile in -next...?
drivers/staging/dream/Kconfig +41 -2
@@ -1,16 +1,55 @@ config DREAM - tristate "HTC Dream support" - depends on BROKEN + bool "HTC Dream support" + depends on ARCH_MSM + +if DREAM source "drivers/staging/dream/smd/Kconfig" source "drivers/staging/dream/camera/Kconfig" +config MSM_AMSS_VERSION + int + default 6210 if MSM_AMSS_VERSION_6210 + default 6220 if MSM_AMSS_VERSION_6220 + default 6225 if MSM_AMSS_VERSION_6225 + default 6350 if MSM_AMSS_VERSION_6350 + +choice + prompt "AMSS modem firmware version" + + default MSM_AMSS_VERSION_6225 + + config MSM_AMSS_VERSION_6210 + bool "6.2.10" + + config MSM_AMSS_VERSION_6220 + bool "6.2.20" + + config MSM_AMSS_VERSION_6225 + bool "6.2.20 + New ADSP" + + config MSM_AMSS_VERSION_6350 + bool "6.3.50" +endchoice + +config MSM_ADSP + tristate "MSM ADSP driver" + default y + help + Provides access to registers needed by the userspace aDSP library. config INPUT_GPIO tristate "GPIO driver support" help Say Y here if you want to support gpio based keys, wheels etc... +config GENERIC_GPIO + bool + default y +config ANDROID_PMEM + bool "Android pmem allocator" + default y +endif
drivers/staging/dream/Makefile +3 -0
@@ -1,4 +1,7 @@ +EXTRA_CFLAGS=-Idrivers/staging/dream/include obj-$(CONFIG_MSM_ADSP) += qdsp5/ smd/ obj-$(CONFIG_MSM_CAMERA) += camera/ obj-$(CONFIG_INPUT_GPIO) += gpio_axis.o gpio_event.o gpio_input.o gpio_matrix.o gpio_output.o +obj-$(CONFIG_ANDROID_PMEM) += pmem.o +obj-y += generic_gpio.o
drivers/staging/dream/camera/mt9t013.c +1 -1
@@ -9,7 +9,7 @@#include <linux/miscdevice.h> #include <linux/kernel.h> #include <media/msm_camera.h> -#include <mach/gpio.h> +#include <linux/gpio.h> #include <mach/camera.h> #include <asm/mach-types.h> #include "mt9t013.h"
drivers/staging/dream/qdsp5/adsp.c +1 -0
@@ -45,6 +45,7 @@ static inline void allow_suspend(void)#include "adsp.h" #define INT_ADSP INT_ADSP_A9_A11 +#define MSM_AD5_BASE IOMEM(0xE0300000)static struct adsp_info adsp_info;static struct msm_rpc_endpoint *rpc_cb_server_client;
drivers/staging/dream/qdsp5/snd.c +10 -0
@@ -28,6 +28,16 @@#include <mach/board.h> #include <mach/msm_rpcrouter.h> +struct snd_endpoint { +int id; +const char *name; +}; + +struct msm_snd_endpoints { +struct snd_endpoint *endpoints; +unsigned num; +}; +struct snd_ctxt {struct mutex lock;int opened;
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 8 lines · Pavel Machek
Quoted 7 lines · Greg KH
Quoted 5 lines · Pavel Machek
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>
Quoted 8 lines
Quoted 2 lines
Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Strange, it seems it is almost all already in. Well, good :-).
But there's small problem. linux-next now contains dwalker's tree, and I could not get it to compile, even with staging disabled. I'll need to look into that.
I worked on it a little, but I won't have time to really start cleaning up that tree till next week, or this weekend.
I pushed a new tree for next that should compile for dream with the attached config. I also included the patch that I added to get it to compile (you'll need the machine types too which I didn't include).
Daniel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dream-compile-state.patch
Type: text/x-patch
Size: 1967 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100119/5b5e1023/attachment-0001.bin>
-------------- next part --------------
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc2
# Tue Jan 12 12:28:42 2010
#CONFIG_ARM=yCONFIG_SYS_SUPPORTS_APM_EMULATION=yCONFIG_GENERIC_GPIO=yCONFIG_GENERIC_TIME=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_HARDIRQS=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_RWSEM_GENERIC_SPINLOCK=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=yCONFIG_VECTORS_BASE=0xffff0000CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
# CONFIG_TREE_PREEMPT_RCU is not setCONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=y
# CONFIG_ELF_CORE is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=y
#
# Kernel Performance Events And Counters
#CONFIG_VM_EVENT_COUNTERS=yCONFIG_COMPAT_BRK=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not setCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y
#
# System Type
#CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not setCONFIG_ARCH_MSM=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not setCONFIG_ARCH_MSM7X01A=y
# CONFIG_ARCH_MSM7X27 is not set
# CONFIG_ARCH_MSM7X30 is not set
# CONFIG_ARCH_QSD8X50 is not setCONFIG_ARCH_MSM_ARM11=y
#
# MSM Board Selection
#
# CONFIG_MACH_HALIBUT is not set
# CONFIG_MACH_MSM7201A_SURF is not set
# CONFIG_MACH_MSM7201A_FFA is not setCONFIG_MACH_TROUT=y
# CONFIG_MACH_SAPPHIRE is not setCONFIG_MSM_STACKED_MEMORY=yCONFIG_MSM_AMSS_VERSION=6225
# CONFIG_MSM_AMSS_VERSION_6210 is not set
# CONFIG_MSM_AMSS_VERSION_6220 is not set CONFIG_MSM_AMSS_VERSION_6225=yCONFIG_MSM_DEBUG_UART=3
# CONFIG_MSM_DEBUG_UART_NONE is not set
# CONFIG_MSM_DEBUG_UART1 is not set
# CONFIG_MSM_DEBUG_UART2 is not setCONFIG_MSM_DEBUG_UART3=yCONFIG_MSM7X00A_USE_GP_TIMER=y
# CONFIG_MSM7X00A_USE_DG_TIMER is not set CONFIG_MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND=y
# CONFIG_MSM7X00A_SLEEP_MODE_POWER_COLLAPSE is not set
# CONFIG_MSM7X00A_SLEEP_MODE_APPS_SLEEP is not set
# CONFIG_MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT is not set # CONFIG_MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT is not set CONFIG_MSM7X00A_SLEEP_MODE=0
# CONFIG_MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND is not set CONFIG_MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE=y
# CONFIG_MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP is not set
# CONFIG_MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT is not set # CONFIG_MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT is not set CONFIG_MSM7X00A_IDLE_SLEEP_MODE=1 CONFIG_MSM7X00A_IDLE_SLEEP_MIN_TIME=20000000 CONFIG_MSM7X00A_IDLE_SPIN_TIME=80000CONFIG_MSM_IDLE_STATS=yCONFIG_MSM_IDLE_STATS_FIRST_BUCKET=62500 CONFIG_MSM_IDLE_STATS_BUCKET_SHIFT=2 CONFIG_MSM_IDLE_STATS_BUCKET_COUNT=10 CONFIG_MSM_SUSPEND_STATS_FIRST_BUCKET=1000000000
# CONFIG_HTC_HEADSET is not set
# CONFIG_TROUT_BATTCHG is not set
# CONFIG_HTC_PWRSINK is not setCONFIG_MSM_FIQ_SUPPORT=yCONFIG_MSM_SMD=yCONFIG_MSM_SMD_PKG3=y
# CONFIG_MSM_SMD_PKG4 is not setCONFIG_MSM_SMD_DEBUG=yCONFIG_MSM_RESET_MODEM=yCONFIG_MSM_SMD_LOGGING=yCONFIG_MSM_SMD_NMEA=yCONFIG_MSM_SMD_TTY=yCONFIG_MSM_SMD_QMI=yCONFIG_MSM_SMD_CTL=yCONFIG_MSM_ONCRPCROUTER=yCONFIG_MSM_ONCRPCROUTER_DEBUG=yCONFIG_MSM_RPCSERVERS=yCONFIG_MSM_RPC_PING=yCONFIG_MSM_RPC_PROC_COMM_TEST=yCONFIG_MSM_RPC_OEM_RAPI=yCONFIG_MSM_RPCSERVER_HANDSET=y
# CONFIG_MSM_VREG_SWITCH_INVERTED is not set
# CONFIG_MSM_DMA_TEST is not setCONFIG_WIFI_CONTROL_FUNC=yCONFIG_WIFI_MEM_PREALLOC=y
# CONFIG_SURF_FFA_GPIO_KEYPAD is not set CONFIG_CLOCK_BASED_SLEEP_LIMIT=y
# CONFIG_MSM_ADM_OFF_AT_POWER_COLLAPSE is not set CONFIG_MSM_SLEEP_TIME_OVERRIDE=yCONFIG_MSM_PM_TIMEOUT_HALT=y
# CONFIG_MSM_PM_TIMEOUT_RESET_MODEM is not set
# CONFIG_MSM_PM_TIMEOUT_RESET_CHIP is not set
#
# Processor Type
#CONFIG_CPU_V6=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=yCONFIG_CPU_ABRT_EV6=yCONFIG_CPU_PABRT_V6=yCONFIG_CPU_CACHE_V6=yCONFIG_CPU_CACHE_VIPT=yCONFIG_CPU_COPY_V6=yCONFIG_CPU_TLB_V6=yCONFIG_CPU_HAS_ASID=yCONFIG_CPU_CP15=yCONFIG_CPU_CP15_MMU=y
#
# Processor Features
#CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not setCONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_411920 is not set
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_HZ=100CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not setCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#CONFIG_ZBOOT_ROM_TEXT=0x0CONFIG_ZBOOT_ROM_BSS=0x0CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_VFP is not set
#
# Userspace binary formats
#CONFIG_BINFMT_ELF=yCONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
# CONFIG_PM_RUNTIME is not setCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=y
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not setCONFIG_WIRELESS=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not setCONFIG_CFG80211_WEXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=y
# CONFIG_MAC80211_RC_PID is not setCONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not setCONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not setCONFIG_RFKILL=yCONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not setCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not setCONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not setCONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not setCONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=yCONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not setCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not setCONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=yCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=yCONFIG_NETDEVICES=yCONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_AX88796 is not set CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=yCONFIG_NETDEV_10000=yCONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_LIBERTAS is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_WAN is not setCONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not setCONFIG_SLHC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not setCONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_MSM=yCONFIG_SERIAL_MSM_CONSOLE=yCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not setCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_MSM is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set CONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#CONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# Enable Host or Gadget support to see Inventra options #
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ECHO is not set
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#CONFIG_INPUT_GPIO=y
# CONFIG_POHMELFS is not set
# CONFIG_PLAN9AUTH is not set
#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
# CONFIG_RAMZSWAP is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_STRIP is not set
# CONFIG_FB_SM7XX is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not setCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not setCONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not setCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not setCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not setCONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not setCONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not setCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_DEBUG_LL=yCONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_DECOMPRESS_GZIP=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
Hi!
Quoted 15 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>Quoted 8 lines
Quoted 2 lines
Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Strange, it seems it is almost all already in. Well, good :-).
But there's small problem. linux-next now contains dwalker's tree, and I could not get it to compile, even with staging disabled. I'll need to look into that.
Quoted 6 lines
I worked on it a little, but I won't have time to really start cleaning up that tree till next week, or this weekend.
I pushed a new tree for next that should compile for dream with the attached config. I also included the patch that I added to get it to compile (you'll need the machine types too which I didn't include).
Thanks! I checked out linux-next version, and it seems to include
Quoted 2 lines
commit
cdf6c137865357112aa31666b65b938ab29fa736
msm: compile fixes for dream.
this patch. It still fails with:
arch/arm/mach-msm/rpc_hsusb.c: In function 'msm_chg_rpc_connect':arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7201a_surf' arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7x27_surf' arch/arm/mach-msm/rpc_hsusb.c:157: error: implicit declaration of function 'machine_is_qsd8x50_surf'
make[1]: *** [arch/arm/mach-msm/rpc_hsusb.o] Error 1
make: *** [arch/arm/mach-msm] Error 2
(and similar error further down). This fixes it, but you probably want to add machine_is_* to your git. (Aha, is that what you meant by "machine types"?
With this patch it compiles.
arch/arm/mach-msm/rpc_hsusb.c +0 -5
@@ -152,11 +152,6 @@ EXPORT_SYMBOL(msm_hsusb_rpc_connect);/* rpc connect for charging */ int msm_chg_rpc_connect (void ) { - -if (machine_is_msm7201a_surf () ||machine_is_msm7x27_surf () || -machine_is_qsd8x50_surf ()) -return -ENOTSUPP ; -if (chg_ep && !IS_ERR (chg_ep)) {printk (KERN_INFO "%s: chg_ep already connected\n" , __func__);return 0 ;
arch/arm/mach-msm/rpc_server_handset.c +0 -6
@@ -369,12 +369,6 @@ static int __init hs_rpc_init(void) {int rc; -if (machine_is_msm7x27_surf () ||machine_is_msm7x27_ffa ()) { - rc =hs_rpc_cb_init (); -if (rc) -pr_err ("%s: failed to initialize\n" , __func__); - } -return msm_rpc_create_server (&hs_rpc_server); }module_init (hs_rpc_init);
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
Quoted 39 lines
Quoted 15 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>Quoted 8 lines
Quoted 2 lines
Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Strange, it seems it is almost all already in. Well, good :-).
But there's small problem. linux-next now contains dwalker's tree, and I could not get it to compile, even with staging disabled. I'll need to look into that.
Quoted 6 lines
I worked on it a little, but I won't have time to really start cleaning up that tree till next week, or this weekend.
I pushed a new tree for next that should compile for dream with the attached config. I also included the patch that I added to get it to compile (you'll need the machine types too which I didn't include).
Thanks! I checked out linux-next version, and it seems to include
Quoted 2 lines
commit
cdf6c137865357112aa31666b65b938ab29fa736
msm: compile fixes for dream.this patch. It still fails with:
arch/arm/mach-msm/rpc_hsusb.c: In function 'msm_chg_rpc_connect':arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7201a_surf'arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7x27_surf'arch/arm/mach-msm/rpc_hsusb.c:157: error: implicit declaration of function 'machine_is_qsd8x50_surf'
make[1]: *** [arch/arm/mach-msm/rpc_hsusb.o] Error 1
make: *** [arch/arm/mach-msm] Error 2
Quoted 5 lines
(and similar error further down). This fixes it, but you probably want to add machine_is_* to your git. (Aha, is that what you meant by "machine types"?
With this patch it compiles.
Ok, it compiles, but I do not see it booting. You config has:
CONFIG_MSM_DEBUG_UART=3
# CONFIG_MSM_DEBUG_UART_NONE is not set
# CONFIG_MSM_DEBUG_UART1 is not set
# CONFIG_MSM_DEBUG_UART2 is not setCONFIG_MSM_DEBUG_UART3=y
...CONFIG_DEBUG_LL=yCONFIG_EARLY_PRINTK=y
set, so I'd expect it to say something on the serial line... (right? Or do I still need to patch printk.c to get that?). And I see nothing :-(.
I'm using
./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage
...with different kernel, it works (as in "I get most of the boot on serial line; it will not actually mount root").
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 62 lines · Pavel Machek
Hi!
Quoted 39 lines
Quoted 15 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>Quoted 8 lines
Quoted 2 lines
Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Strange, it seems it is almost all already in. Well, good :-).
But there's small problem. linux-next now contains dwalker's tree, and I could not get it to compile, even with staging disabled. I'll need to look into that.
Quoted 6 lines
I worked on it a little, but I won't have time to really start cleaning up that tree till next week, or this weekend.
I pushed a new tree for next that should compile for dream with the attached config. I also included the patch that I added to get it to compile (you'll need the machine types too which I didn't include).
Thanks! I checked out linux-next version, and it seems to include
Quoted 2 lines
commit
cdf6c137865357112aa31666b65b938ab29fa736
msm: compile fixes for dream.this patch. It still fails with:
arch/arm/mach-msm/rpc_hsusb.c: In function 'msm_chg_rpc_connect':arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7201a_surf'arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7x27_surf'arch/arm/mach-msm/rpc_hsusb.c:157: error: implicit declaration of function 'machine_is_qsd8x50_surf'
make[1]: *** [arch/arm/mach-msm/rpc_hsusb.o] Error 1
make: *** [arch/arm/mach-msm] Error 2Quoted 5 lines
(and similar error further down). This fixes it, but you probably want to add machine_is_* to your git. (Aha, is that what you meant by "machine types"?
With this patch it compiles.
Ok, it compiles, but I do not see it booting. You config has:
CONFIG_MSM_DEBUG_UART=3
#CONFIG_MSM_DEBUG_UART_NONEis not set
#CONFIG_MSM_DEBUG_UART1is not set
#CONFIG_MSM_DEBUG_UART2is not setCONFIG_MSM_DEBUG_UART3=y
...CONFIG_DEBUG_LL=yCONFIG_EARLY_PRINTK=yset, so I'd expect it to say something on the serial line... (right? Or do I still need to patch
printk.cto get that?). And I see nothing :-(.
Quoted 6 lines
I'm using
./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage
...with different kernel, it works (as in "I get most of the boot on serial line; it will not actually mount root").
Have you seen this error?
GEN /local/mnt/workspace/c_dwalke/git-trees/dream-test/Makefilescripts/kconfig/conf -s arch/arm/Kconfig
GEN /local/mnt/workspace/c_dwalke/git-trees/dream-test/Makefile CHK include/linux/version.h CHK include/generated/utsrelease.h Using /local/mnt/workspace/c_dwalke/git-trees/linux-2.6 as source for kernel make[2]: `include/generated/mach-types.h' is up to date. CALL /local/mnt/workspace/c_dwalke/git-trees/linux-2.6/scripts/checksyscalls.sh CHK include/generated/compile.h GZIP kernel/config_data.gz IKCFG kernel/config_data.h CC kernel/configs.o LD kernel/built-in.o CC drivers/video/msm/msm_fb.o CC drivers/video/cfbcopyarea.o
/home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error: linux/msm_mdp.h: No such file or directory compilation terminated.
make[4]: *** [drivers/video/msm/msm_fb.o] Error 1
make[3]: *** [drivers/video/msm] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/video] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2
Even with the framebuffer off I still don't get any serial output on a plain 2.6.33-rc6 .. I'm using a config that you sent me when you first tested my -next tree .
Daniel
Hi!
Quoted 29 lines
Quoted 21 lines
Quoted 5 lines
(and similar error further down). This fixes it, but you probably want to add machine_is_* to your git. (Aha, is that what you meant by "machine types"?
With this patch it compiles.
Ok, it compiles, but I do not see it booting. You config has:
CONFIG_MSM_DEBUG_UART=3
#CONFIG_MSM_DEBUG_UART_NONEis not set
#CONFIG_MSM_DEBUG_UART1is not set
#CONFIG_MSM_DEBUG_UART2is not setCONFIG_MSM_DEBUG_UART3=y
...CONFIG_DEBUG_LL=yCONFIG_EARLY_PRINTK=yset, so I'd expect it to say something on the serial line... (right? Or do I still need to patch
printk.cto get that?). And I see nothing :-(.Quoted 6 lines
I'm using
./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage
...with different kernel, it works (as in "I get most of the boot on serial line; it will not actually mount root").
Have you seen this error?
...
Quoted 8 lines
/home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error:linux/msm_mdp.h: No such file or directory compilation terminated.
make[4]: *** [drivers/video/msm/msm_fb.o] Error 1
make[3]: *** [drivers/video/msm] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/video] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2
Yes, framebuffer has problems.
Quoted 3 lines
Even with the framebuffer off I still don't get any serial output on a plain 2.6.33-rc6 .. I'm using a config that you sent me when you first tested my -next tree .
2.6.33 boots here, with attached config. I'll try -next next.
commandline from head: console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=ro1command line length =344
active commandline: board_trout.disable_uart3=0 board_trout.usb_h2w_sw=0 board_1PARTITIOM_NUM_MAX =6 Valid partition num=6
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.33-00001-gbaac35c (pavel at amd) (gcc version 4.30[ 0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ)f[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: HTC Dream [ 0.000000] Ignoring unrecognised tag 0x4d534d70 [ 0.000000] Ignoring unrecognised tag 0x57494649 [ 0.000000] Ignoring unrecognised tag 0x89768976 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pa4[ 0.000000] Kernel command line:
board_trout.disable_uart3=0 board_trout.usb1[ 0.000000] PID hash
table entries: 512 (order: -1, 2048 bytes)
...
[ 4.960000] NET: Registered protocol family 17 [ 4.970000] clock_late_init() disabled 21 unused clocks [ 4.970000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 4.980000] Waiting 5sec before mounting root device... [ 9.990000] VFS: Cannot open root device "mmcblk0p1" or unknown-block(0,0) [ 9.990000] Please append a correct "root=" boot option; here are
the availa:[ 10.000000] Kernel panic - not syncing: VFS: Unable to
mount root fs on unkn)
Pavel
Signature · 1,384 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- # # Automatically generated make config: don't edit # Linux kernel version: 2.6.33 # Thu Feb 25 20:03:36 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set # CONFIG_RD_LZO is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # # Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_INLINE_SPIN_UNLOCK=y # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y # CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y # CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # # System Type # CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set CONFIG_ARCH_MSM=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_U8500 is not set # # MSM Board Type # CONFIG_MSM_DEBUG_UART=3 # CONFIG_MSM_DEBUG_UART_NONE is not set # CONFIG_MSM_DEBUG_UART1 is not set # CONFIG_MSM_DEBUG_UART2 is not set CONFIG_MSM_DEBUG_UART3=y CONFIG_MACH_HALIBUT=y CONFIG_MACH_TROUT=y # # Processor Type # CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V6=y CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y # # Processor Features # CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_411920 is not set # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # # CPU Power Management # # CONFIG_CPU_IDLE is not set # # Floating point emulation # # # At least one emulation must be selected # # CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # # CONFIG_WIMAX is not set CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y # CONFIG_RFKILL_INPUT is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y CONFIG_DM_DEBUG=y CONFIG_DM_CRYPT=y # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y # CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # # PPS support # # CONFIG_PPS is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_MSM is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set # # Special HID drivers # CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # # Enable Host or Gadget support to see Inventra options # # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y # CONFIG_MMC_BLOCK_BOUNCE is not set # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_MSM7X00A=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # # iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # # CONFIG_RTC_INTF_SYSFS is not set # CONFIG_RTC_INTF_PROC is not set # CONFIG_RTC_INTF_DEV is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # TI VLYNQ # CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ECHO is not set CONFIG_MSM_SMD=y CONFIG_MSM_ONCRPCROUTER=y CONFIG_MSM_RPCSERVERS=y # # Qualcomm MSM Camera And Video # # # Camera Sensor Selection # CONFIG_INPUT_GPIO=y # CONFIG_POHMELFS is not set # CONFIG_PLAN9AUTH is not set # # RAR Register Driver # # CONFIG_RAR_REGISTER is not set # CONFIG_IIO is not set # CONFIG_RAMZSWAP is not set # CONFIG_BATMAN_ADV is not set # CONFIG_STRIP is not set # CONFIG_FB_SM7XX is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Kernel hacking # CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_DEBUG_VM=y # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set CONFIG_DEBUG_SG=y # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_BOOT_PRINTK_DELAY=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_ICEDCC is not set # CONFIG_OC_ETM is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y
Quoted 41 lines · Pavel Machek
Hi!
Quoted 29 lines
Quoted 21 lines
Quoted 5 lines
(and similar error further down). This fixes it, but you probably want to add machine_is_* to your git. (Aha, is that what you meant by "machine types"?
With this patch it compiles.
Ok, it compiles, but I do not see it booting. You config has:
CONFIG_MSM_DEBUG_UART=3
#CONFIG_MSM_DEBUG_UART_NONEis not set
#CONFIG_MSM_DEBUG_UART1is not set
#CONFIG_MSM_DEBUG_UART2is not setCONFIG_MSM_DEBUG_UART3=y
...CONFIG_DEBUG_LL=yCONFIG_EARLY_PRINTK=yset, so I'd expect it to say something on the serial line... (right? Or do I still need to patch
printk.cto get that?). And I see nothing :-(.Quoted 6 lines
I'm using
./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage
...with different kernel, it works (as in "I get most of the boot on serial line; it will not actually mount root").
Have you seen this error?
...
Quoted 8 lines
/home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error:linux/msm_mdp.h: No such file or directory compilation terminated.
make[4]: *** [drivers/video/msm/msm_fb.o] Error 1
make[3]: *** [drivers/video/msm] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/video] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2
Quoted 7 lines
Yes, framebuffer has problems.
Quoted 3 lines
Even with the framebuffer off I still don't get any serial output on a plain 2.6.33-rc6 .. I'm using a config that you sent me when you first tested my -next tree .
2.6.33 boots here, with attached config. I'll try -next next.
My -next tree hasn't changed much since you last looked at it .. I wouldn't bother testing it. I might take some small fixes from that tree to merge, but what's there is still too much of a mess to merge.
I just pushed another tree called "working-mmc" which still needs some clean up but should have working mmc if you want to test that.
Daniel
Hi!
Quoted 15 lines
Quoted 15 lines
Quoted 8 lines
/home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error:linux/msm_mdp.h: No such file or directory compilation terminated.
make[4]: *** [drivers/video/msm/msm_fb.o] Error 1
make[3]: *** [drivers/video/msm] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/video] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2Yes, framebuffer has problems.
Quoted 3 lines
Even with the framebuffer off I still don't get any serial output on a plain 2.6.33-rc6 .. I'm using a config that you sent me when you first tested my -next tree .
Quoted 5 lines
Quoted 1 line
2.6.33 boots here, with attached config. I'll try -next next.
My -next tree hasn't changed much since you last looked at it .. I wouldn't bother testing it. I might take some small fixes from that tree to merge, but what's there is still too much of a mess to merge.
Ok, so your -next tree will not be merged for 2.6.34?
Quoted 2 lines
I just pushed another tree called "working-mmc" which still needs some clean up but should have working mmc if you want to test that.
Do you have git url? Yes, I'd like to play.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 17 lines · Pavel Machek
Hi!
Quoted 15 lines
Quoted 15 lines
Quoted 8 lines
/home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error:linux/msm_mdp.h: No such file or directory compilation terminated.
make[4]: *** [drivers/video/msm/msm_fb.o] Error 1
make[3]: *** [drivers/video/msm] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/video] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2Yes, framebuffer has problems.
Quoted 3 lines
Even with the framebuffer off I still don't get any serial output on a plain 2.6.33-rc6 .. I'm using a config that you sent me when you first tested my -next tree .
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
2.6.33 boots here, with attached config. I'll try -next next.
My -next tree hasn't changed much since you last looked at it .. I wouldn't bother testing it. I might take some small fixes from that tree to merge, but what's there is still too much of a mess to merge.
Ok, so your -next tree will not be merged for 2.6.34?
No it won't be. I was still planning to merge some more stripped down board file for other targets, along with some other minor stuff..
Quoted 4 lines
Quoted 2 lines
I just pushed another tree called "working-mmc" which still needs some clean up but should have working mmc if you want to test that.
Do you have git url? Yes, I'd like to play.
git://codeaurora.org/quic/kernel/dwalker/linux-msm.git working-mmc
or
Daniel
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi!
Quoted 13 lines
Quoted 13 lines
arch/arm/mach-msm/smd.c:429: warning: 'smd_dsp_irq_handler' defined but not used
CCarch/arm/mach-msm/smd_debug.oarch/arm/mach-msm/smd_debug.c:240: warning: initialization from incompatible pointer type
CCarch/arm/mach-msm/board-dream.o
make[1]: *** No rule to make targetarch/arm/mach-msm/board-dream-gpio.o', needed byarch/arm/mach-msm/built-in.o'. Stop.
make: *** [arch/arm/mach-msm] Error 2
24.39user 5.08system 97.43 (1m37.437s) elapsed 30.24%CPU pavel at amd:/data/l/linux-dwalker-mmc$ emacs .conf
Quoted 5 lines
Quoted 1 line
....maybe
board-dream-gpio.cneeds to be added to git?I pushed a new branch into working-mmc . I added the
board-dream-gpio.cfile.. It's not the one you wrote tho, but eventually it will be. It should work now if you want to test it.
How do I get that one? I tried killing the repository and redoing git pull, followed up by
git checkout refs/remotes/origin/working-mmc
only to get (git log): [I think I was there before].
commit 2b0bcf161e83fc7d45476f3330f06b656a1f03d4
Author: Daniel Walker <[email protected]> Date: Mon Feb 22 12:29:17 2010 -0800
DMA fixes (get MMC working).
commit 5fc33446739aa7a0826d98a00cc50a712c6d60eb
Author: San Mehat <[email protected]> Date: Wed Feb 3 12:59:29 2010 -0800
drivers: mmc: msm_sdcc: Add EMBEDDED_SDIO support
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 2 lines · Pavel Machek
How do I get that one? I tried killing the repository and redoing git pull, followed up by
You should just be able to do "git remotes update" , then checkout the branch again.
Quoted 10 lines
git checkout refs/remotes/origin/working-mmc
only to get (git log): [I think I was there before].
commit
2b0bcf161e83fc7d45476f3330f06b656a1f03d4Author: Daniel Walker <[email protected]> Date: Mon Feb 22 12:29:17 2010 -0800DMA fixes (get MMC working).
Quoted 7 lines
commit
5fc33446739aa7a0826d98a00cc50a712c6d60ebAuthor: San Mehat <[email protected]> Date: Wed Feb 3 12:59:29 2010 -0800drivers: mmc:
msm_sdcc: AddEMBEDDED_SDIOsupportSigned-off-by Dmitry Shmidt <[email protected]>
I actually dropped a patch between the two above, otherwise the history is very similar. I think you have the right one, are you still getting the compile errors?
Daniel
Quoted 7 lines · Daniel Walker
Quoted 2 lines · Pavel Machek
How do I get that one? I tried killing the repository and redoing git pull, followed up by
You should just be able to do "git remotes update" , then checkout the branch again.
Thanks!
Quoted 11 lines
Quoted 7 lines
commit
5fc33446739aa7a0826d98a00cc50a712c6d60ebAuthor: San Mehat <[email protected]> Date: Wed Feb 3 12:59:29 2010 -0800drivers: mmc:
msm_sdcc: AddEMBEDDED_SDIOsupportSigned-off-by Dmitry Shmidt <[email protected]>I actually dropped a patch between the two above, otherwise the history is very similar. I think you have the right one, are you still getting the compile errors?
Different one this time :-(
make[1]: *** No rule to make target arch/arm/mach-msm/board-halibut-keypad.o', needed by arch/arm/mach-msm/built-in.o'. Stop.
Ok, I worked around it by config change, and had to disable msm framebuffer, too. Then it compiles... more testing tommorow.
Pavel
.config renamed from linux-dwalker-delme/.config +6 -6
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.33-rc8 -# Fri Feb 26 21:49:02 2010 +# Mon Mar 1 22:39:26 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -224,7 +224,7 @@ # CONFIG_MSM_DEBUG_UART1 is not set # CONFIG_MSM_DEBUG_UART2 is not set CONFIG_MSM_DEBUG_UART3=y -CONFIG_MACH_HALIBUT=y +# CONFIG_MACH_HALIBUT is not set CONFIG_MACH_TROUT=y CONFIG_MSM_SMD=y
@@ -821,9 +821,9 @@ # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set
@@ -843,7 +843,7 @@ # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set -CONFIG_FB_MSM=y +# CONFIG_FB_MSM is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
Quoted 14 lines
Quoted 14 lines
git checkout refs/remotes/origin/working-mmc
only to get (git log): [I think I was there before].
commit
2b0bcf161e83fc7d45476f3330f06b656a1f03d4Author: Daniel Walker <[email protected]> Date: Mon Feb 22 12:29:17 2010 -0800DMA fixes (get MMC working).
commit
5fc33446739aa7a0826d98a00cc50a712c6d60ebAuthor: San Mehat <[email protected]> Date: Wed Feb 3 12:59:29 2010 -0800
Quoted 7 lines
Quoted 3 lines
drivers: mmc:
msm_sdcc: AddEMBEDDED_SDIOsupportSigned-off-by Dmitry Shmidt <[email protected]>I actually dropped a patch between the two above, otherwise the history is very similar. I think you have the right one, are you still getting the compile errors?
No, now it compiles and detects MMC, which is very very good. Now framebuffer needs to be sorted and we'll have usable machine :-).
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 10 lines · Pavel Machek
arch/arm/mach-msm/rpc_hsusb.c: In function 'msm_chg_rpc_connect':arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7201a_surf'arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of function 'machine_is_msm7x27_surf'arch/arm/mach-msm/rpc_hsusb.c:157: error: implicit declaration of function 'machine_is_qsd8x50_surf'
make[1]: *** [arch/arm/mach-msm/rpc_hsusb.o] Error 1
make: *** [arch/arm/mach-msm] Error 2
Quoted 3 lines
(and similar error further down). This fixes it, but you probably want to add machine_is_* to your git. (Aha, is that what you meant by "machine types"?
Yeah, those machines aren't registered so the inlines don't get generated ..
Quoted 1 line
With this patch it compiles.
I need to actually register those machine types, So I can't remove them. They are valid boards.
Daniel
Quoted 21 lines · Pavel Machek
Quoted 9 lines · Greg KH
Quoted 5 lines · Pavel Machek
This adds missing include files, so it should now compile. ifdef guards were added to
Kconfig, so it should not cause problems on non-arch-msm machines.Signed-off-by Pavel Machek <[email protected]>Odd, this doesn't apply to the linux-next tree, some of the files are already there.
Strange, it seems it is almost all already in. Well, good :-).
But there's small problem. linux-next now contains dwalker's tree, and I could not get it to compile, even with staging disabled. I'll need to look into that.
Here are remaining few patches, now easy to read. (It also shows that at least
CONFIG_AMSS_VERSIONandCONFIG_GPIOshould really be inarch/arm. I believe it will get there in .34 or so...)
Quoted 8 lines
---
Guard whole dream/ specific
KconfigwithCONFIG_DREAMso that we don't cause compile failures in other architectures. Add missing pieces so that it compiles.I am not sure if this is ready for staging. I guess we should wait till I get tree to compile in -next...?
Ok, I'll wait for you to get things building. Feel free to send the patch to me after that.
thanks,
greg k-h