Skip to contentSkip to conversation

ARM: SMDK6410: Register AC97 controller

PATCH New Mark Brown 2 participants 3 messages Mar 25, 2010 – Mar 31, 2010

Subsystems (3)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 ARM: SMDK6410: Register AC97 controller

The SMDK6410 has a WM9713 connected to the AC97 interface, by default on the GPD pins though this can be changed with a switch on the board.

---
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
arch/arm/mach-s3c64xx/mach-smdk6410.c +5 -0
index 2d5afd2..6878fbd 100644
@@ -64,6 +64,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -254,6 +255,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
+	&s3c64xx_device_ac97,
 	&s3c64xx_device_iisv4,
 
 #ifdef CONFIG_REGULATOR
@@ -652,6 +654,9 @@ static void __init smdk6410_machine_init(void)
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
+	/* Board defualt with CFG2.1 off */
+	s3c64xx_ac97_setup_gpio(S3C64XX_AC97_GPD);
+
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 }
 
Signature · 1 line
1.7.0.2
#1 lore raw

PATCH 1/1 ARM: SMDK6410: Register AC97 controller

Quoted 2 lines · Mark Brown

The SMDK6410 has a WM9713 connected to the AC97 interface, by default on the GPD pins though this can be changed with a switch on the board.

Hmm, I really don't like the fact that we've no good way of finding out what the switch positions are...

Quoted 43 lines
---
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
arch/arm/mach-s3c64xx/mach-smdk6410.c +5 -0
index 2d5afd2..6878fbd 100644
@@ -64,6 +64,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -254,6 +255,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
+	&s3c64xx_device_ac97,
 	&s3c64xx_device_iisv4,
 
 #ifdef CONFIG_REGULATOR
@@ -652,6 +654,9 @@ static void __init smdk6410_machine_init(void)
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
+	/* Board defualt with CFG2.1 off */
+	s3c64xx_ac97_setup_gpio(S3C64XX_AC97_GPD);
+
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 }
 
Signature · 7 lines
1.7.0.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 5 lines
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.
author
#2 lore raw

PATCH 1/1 ARM: SMDK6410: Register AC97 controller

Quoted 7 lines · Ben Dooks
Quoted 2 lines · Mark Brown

The SMDK6410 has a WM9713 connected to the AC97 interface, by default on the GPD pins though this can be changed with a switch on the board.

Hmm, I really don't like the fact that we've no good way of finding out what the switch positions are...

Not much we can do about the existing hardware, sadly. There's a bunch of other similar switches on the board (like the one that selects between the two ethernet controllers) as well.