ARM: SMDK6410: Register AC97 controller
Subsystems (3)
PATCH 1/1 ARM: SMDK6410: Register AC97 controller
The SMDK6410 has a WM9713 connected to the AC97 interface, by default on the GPD pins though this can be changed with a switch on the board.
--- arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
arch/arm/mach-s3c64xx/mach-smdk6410.c +5 -0
@@ -64,6 +64,7 @@#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/audio.h> #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -254,6 +255,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_ohci, &s3c_device_usb_hsotg, + &s3c64xx_device_ac97, &s3c64xx_device_iisv4, #ifdef CONFIG_REGULATOR
@@ -652,6 +654,9 @@ static void __init smdk6410_machine_init(void)i2c_register_board_info (0 , i2c_devs0,ARRAY_SIZE (i2c_devs0));i2c_register_board_info (1 , i2c_devs1,ARRAY_SIZE (i2c_devs1)); +/* Board defualt with CFG2.1 off */ +s3c64xx_ac97_setup_gpio (S3C64XX_AC97_GPD ); +platform_add_devices (smdk6410_devices,ARRAY_SIZE (smdk6410_devices)); }
Signature · 1 line
1.7.0.2
PATCH 1/1 ARM: SMDK6410: Register AC97 controller
Quoted 2 lines · Mark Brown
The SMDK6410 has a WM9713 connected to the AC97 interface, by default on the GPD pins though this can be changed with a switch on the board.
Hmm, I really don't like the fact that we've no good way of finding out what the switch positions are...
Quoted 43 lines
Signed-off-by Mark Brown <[email protected]>--- arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)arch/arm/mach-s3c64xx/mach-smdk6410.c +5
-0@@ -64,6 +64,7 @@#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/audio.h> #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB@@ -254,6 +255,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_ohci, &s3c_device_usb_hsotg, + &s3c64xx_device_ac97, &s3c64xx_device_iisv4, #ifdef CONFIG_REGULATOR@@ -652,6 +654,9 @@ static void __init smdk6410_machine_init(void)i2c_register_board_info (0 , i2c_devs0,ARRAY_SIZE (i2c_devs0));i2c_register_board_info (1 , i2c_devs1,ARRAY_SIZE (i2c_devs1)); +/* Board defualt with CFG2.1 off */ +s3c64xx_ac97_setup_gpio (S3C64XX_AC97_GPD ); +platform_add_devices (smdk6410_devices,ARRAY_SIZE (smdk6410_devices)); }Signature · 7 lines
1.7.0.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.
PATCH 1/1 ARM: SMDK6410: Register AC97 controller
Quoted 7 lines · Ben Dooks
Quoted 2 lines · Mark Brown
The SMDK6410 has a WM9713 connected to the AC97 interface, by default on the GPD pins though this can be changed with a switch on the board.
Hmm, I really don't like the fact that we've no good way of finding out what the switch positions are...
Not much we can do about the existing hardware, sadly. There's a bunch of other similar switches on the board (like the one that selects between the two ethernet controllers) as well.