logical volumes and raid alignment
Hi!
I am using LVM on a hardware RAID 5 and I'd like to tune the alignment of lvm extents to match the raid stripe size.
My raid chunk size is 64k and I am using 5 data-bearing discs (raid 5 with 6 discs), so the raid stripe size should be 64k * 5 = 320k.
I have already managed to properly align the partition to a multiple of this value and I am able to align the beginning of the first extent by specifying --dataalignment 320k to pvcreate.
But unfortunately the --physicalextentsize must be a power of 2, so I cannot use a multiple of 320k as the physical extent size.
What are your experiences with tuning and properly aligning lvm + raid? Does anyone know a workaround?
Thanks,
--leo
Signature · 3 lines
e-mail ::: Leo.Bergolth (at) wu.ac.at fax ::: +43-1-31336-906050 location ::: IT-Services | Vienna University of Economics | Austria
Quoted 8 lines · Alexander 'Leo' Bergolth
My raid chunk size is 64k and I am using 5 data-bearing discs (raid 5 with 6 discs), so the raid stripe size should be 64k * 5 = 320k.
But unfortunately the --physicalextentsize must be a power of 2, so I cannot use a multiple of 320k as the physical extent size.
What are your experiences with tuning and properly aligning lvm + raid? Does anyone know a workaround?
Use 4 data bearing disks. Let #6 be a spare. You're supposed to have a spare anyway.
Signature · 4 lines
Stuart D. Gathman <[email protected]> Business Management Systems Inc. Phone: 703 591-0911 Fax: 703 591-6154 "Confutatis maledictis, flammis acribus addictis" - background song for a Microsoft sponsored "Where do you want to go from here?" commercial.
Quoted 12 lines · Alexander 'Leo' Bergolth
Hi!
I am using LVM on a hardware RAID 5 and I'd like to tune the alignment of lvm extents to match the raid stripe size.
My raid chunk size is 64k and I am using 5 data-bearing discs (raid 5 with 6 discs), so the raid stripe size should be 64k * 5 = 320k.
I have already managed to properly align the partition to a multiple of this value and I am able to align the beginning of the first extent by specifying --dataalignment 320k to pvcreate.
Quoted 5 lines
But unfortunately the --physicalextentsize must be a power of 2, so I cannot use a multiple of 320k as the physical extent size.
What are your experiences with tuning and properly aligning lvm + raid? Does anyone know a workaround?
I had a similar issue, and best thing i came up with was creating volume group with PE Size == chunk_size, and create/extend all logical volumes to a multiple of data_disks PE.
L.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \