Skip to contentSkip to conversation

logical volumes and raid alignment

linux-lvm Alexander 'Leo' Bergolth 3 participants 3 messages May 2, 2010 – May 3, 2010

lore
Share & tools
lore
#0 lore raw

Hi!

I am using LVM on a hardware RAID 5 and I'd like to tune the alignment of lvm extents to match the raid stripe size.

My raid chunk size is 64k and I am using 5 data-bearing discs (raid 5 with 6 discs), so the raid stripe size should be 64k * 5 = 320k.

I have already managed to properly align the partition to a multiple of this value and I am able to align the beginning of the first extent by specifying --dataalignment 320k to pvcreate.

But unfortunately the --physicalextentsize must be a power of 2, so I cannot use a multiple of 320k as the physical extent size.

What are your experiences with tuning and properly aligning lvm + raid? Does anyone know a workaround?

Thanks,
--leo

Signature · 3 lines
e-mail   ::: Leo.Bergolth (at) wu.ac.at
fax      ::: +43-1-31336-906050
location ::: IT-Services | Vienna University of Economics | Austria
#1 lore raw
Quoted 8 lines · Alexander 'Leo' Bergolth

My raid chunk size is 64k and I am using 5 data-bearing discs (raid 5 with 6 discs), so the raid stripe size should be 64k * 5 = 320k.

But unfortunately the --physicalextentsize must be a power of 2, so I cannot use a multiple of 320k as the physical extent size.

What are your experiences with tuning and properly aligning lvm + raid? Does anyone know a workaround?

Use 4 data bearing disks. Let #6 be a spare. You're supposed to have a spare anyway.

Signature · 4 lines
	      Stuart D. Gathman <[email protected]>
    Business Management Systems Inc.  Phone: 703 591-0911 Fax: 703 591-6154
"Confutatis maledictis, flammis acribus addictis" - background song for
a Microsoft sponsored "Where do you want to go from here?" commercial.
#2 lore raw
In reply to Alexander 'Leo' Bergolth
Quoted 12 lines · Alexander 'Leo' Bergolth

Hi!

I am using LVM on a hardware RAID 5 and I'd like to tune the alignment of lvm extents to match the raid stripe size.

My raid chunk size is 64k and I am using 5 data-bearing discs (raid 5 with 6 discs), so the raid stripe size should be 64k * 5 = 320k.

I have already managed to properly align the partition to a multiple of this value and I am able to align the beginning of the first extent by specifying --dataalignment 320k to pvcreate.

Quoted 5 lines

But unfortunately the --physicalextentsize must be a power of 2, so I cannot use a multiple of 320k as the physical extent size.

What are your experiences with tuning and properly aligning lvm + raid? Does anyone know a workaround?

I had a similar issue, and best thing i came up with was creating volume group with PE Size == chunk_size, and create/extend all logical volumes to a multiple of data_disks PE.

L.

Signature · 6 lines
Luca Berra -- [email protected]
        Communication Media & Services S.r.l.
 /"\
 \ /     ASCII RIBBON CAMPAIGN
  X        AGAINST HTML MAIL
 / \